coastal dreams - elizabeth's studio · fabrics: oastal dreams by alan giana for elizabeth’s...
TRANSCRIPT
Coastal Dreams
52” x 52”
Elizabeth's Studio, LLC
440 S. Main Street, Milltown, New Jersey 08850
732-651-4115 www.elizabethsstudio.com
2018: Elizabeth’s Studio LLC—All rights reserved
Quilt design by Deborah G. Stanley
Fabrics: Coastal Dreams by Alan Giana for Elizabeth’s Studio LLC 13004 Sand (block panel)—2/3 yard
P546 Cream (pearl tone-on-tone)—3/4 yard
291 Multi (allover)—1/2 yard
528 Lake (allover water)—1 yard
290 Sand (allover)—3/4 yard
13005 Sand (scenic)—1-1/4 yards
291 Multi (allover)—1/2 yard for binding
Backing Fabric: 3-1/2 yards
Batting: for 52” x 52” quilt
Cutting: 13004 Sand (block panel): Fussy cut (4) 10-1/2” blocks, centering motifs.
P546 Cream (pearl tone-on-tone): Cut (3) 3-3/8” x WOF strips, cross cut into (32) 3-3/8” squares. Cut each
square once diagonally to form (64) half-square triangles.
Cut (1) 6-1/4” x WOF strip, cross cut into (2) 6-1/4” squares. Cut each square twice on the diagonal to form
(8) quarter-square triangles.
Cut (1) 3” x WOF (width of fabric) strip, cross cut into (8) 3” squares.
291 Multi (allover): Cut (2) 3” X WOF strips, cross cut into (16) 3” squares.
Cut (1) 6-1/4” x WOF strips, cross cut into (4) 6-1/4” squares. Cut each square twice on the diagonal to form
(16) quarter square triangles.
528 Lake (allover water): Cut (3) 5-7/8” x WOF strips, cross cut into (16) 5-7/8” squares. Cut each square
once on the diagonal to form (32) half-square triangles, cutting (8) squares in each direction to maintain
directionality of “water”.
Cut (4) 1-1/2” x WOF strips, cross cut into (2) 1-1/2” x 40-1/2” and (2) 1-1/2” x 42-1/2” border strips.
If necessary, cut an additional 1-1/2” strip to piece the longer borders.
Cut (1) 3” x WOF strip, cross cut into (8) 3” squares for borders.
290 Sand (allover): Cut (1) 3” x WOF (width of fabric) strip, cross cut into (8) 3” squares.
Cut (3) 3-3/8” x WOF strips, cross cut into (32) 3-3/8” squares, cut once diagonally to form (64) half-square
triangles.
Cut (1) 3” x WOF strip, cross cut into (8) 3” squares.
Cut (1) 6-1/4” x WOF strip, cross cut into (2) 6-1/4” squares. Cut each square twice on the diagonal to form
(8) quarter-square triangles.
13005 Sand (scenic): Cut (4) 5-1/2” x WOF strips for outer border, cross cut to 5-1/2” x 42-1/2”. Extra fabric is
allowed to align motifs. If necessary, cut an extra strip to piece the borders.
291 Multi (allover): Cut (6) 2-1/2” x WOF strips for binding, set aside.
Star Block (make 2 of each colorway):
Make the half-square triangle units:
Sew together (1) 290 Sand (allover) 3-3/8” triangle and (1) P546
Cream (pearl tone-on-tone) 3-3/8” triangle to form a half-square
triangle block. Repeat to make a total of (32) half-square units.
Make the corner four-patch units:
Use (8) 3” P546 Cream (pearl tone-on-tone) squares, (8) 3” 291 Multi (allover) squares and
(16) half-square units from above step to form (4) four-patch corner units. Be mindful of the
orientation of the half-square units.
Repeat steps using (8) 290 Sand (allover) 3” squares, (8) 291 Multi (allover) 3” squares and
(16) remaining half-square units to make 4 more four-patch corner units (second colorway).
Make the star point sections:
Sew together (1) 6-1/4” P546 Cream (pearl tone-on-tone) quarter-square triangle and (2)
3-3/8” 290 Sand (allover) half-square triangles to form first part of unit. Repeat to make
(7) more units.
Repeat steps using 6-1/4” 290 Sand (allover) quarter-square triangles and P546 Cream
(pearl tone-on-tone) 3-3/8” half-square triangles to make (8) units of the opposite colorway.
Complete star point units:
Sew (2) 3-3/8” P546 Cream (pearl tone-on-tone) triangles to each side of unit, being sure
to orient the triangles correctly. Then add (1) 291 Multi (allover) 6-1/4” quarter-square
triangle to the bottom of this unit.
Finally, add (2) 5-7/8” 528 Lake (allover) half-square triangles to each side of the unit to
complete the star point section. Complete 7 more units of the same colorway. Be sure to
orient the 528 Lake (allover) horizontally in four units and
vertically (for the sides of the stars) in the other four units.
Repeat steps using second colorway of star point sections, (2) 290 Sand (allover) 3-3/8”
half-square triangles and 291 Multi (allover) 6-1/4” quarter-square triangles to complete
8 more star point units.
Add 528 Lake (allover) 5-7/8” triangles to sides, again taking care to orient the 528 Lake
(allover) fabric properly in all units.
Assemble the star blocks:
First Row: Sew together (1) corner unit, one star point unit, and (1) corner unit
to form first row. Maintain proper orientation of units.
Second row: Sew together (1) star point unit, (1) 13004 Sand (block panel)
10-1/2” fussy-cut block, and (1) star point unit to form second row.
Third row: Same as the first row.
Complete two blocks of each colorway.
Assemble the Center Section:
Sew the four star blocks together to form center section.
Adding Borders:
Add 528 Lake (allover) 1-1/2” x 40-1/2” strips to sides of quilt top.
Add 528 Lake (allover) 1-1/2” x 42-1/2” strips to top and bottom of
quilt top (pieced if necessary).
Sew together 290 Sand (allover) 3” squares and 528 Lake (allover) 3” squares
to form four patch units, being sure to orient 528 Lake (allover) horizontally.
Sew 13005 Sand (scenic) 5-1/2” x 42-1/2” strips
to sides of center section. Add four patch units
to each end of remaining border strips, add to
top and bottom of quilt top.
Finishing:
Layer quilt top, batting and backing.
Quilt as desired.
Use reserved 291 Multi (allover) 2-1/2” strips to
bind quilt.