CellMax Technologies AB reserves the right to modify or change the above specifications without notice. CMA-BTLBHH_6517/21/21_PA6

XXX-Pol 790-960/1710-2180 / 1710-2180

CMA-BTLBHH/6517/21/21

Electrical specification:

Frequency range per input (MHz) 2 x 790-960 4 x 1710-2180

Frequency band definitions (MHz) 790-862 880-960 1710-1880 1850-1990 1920-2180

Polarization Dual linear ±45º 2 x Dual linear ±45º

Gain (dBi) 16.6 16.9 20.2 20.7 21.0

Horizontal = 3 dB beamwidth (º) 69 72 65 63 61

Vertical = 3 dB beamwidth (º) 9.8 8.8 4.6 4.2 3.9

Adjustable electrical downtilt 0º - 8º 0º - 6º

Front to back ratio (dB) >25 >25

First upper sidelobe suppression 0º, 4º, 8º 0º, 3º , 6º

>20, >18, >16 >20, >16, >16

First nullfill below horizon (dB) - <24

Cross-polar discrimination +/-0º (dB) >20 >20

Cross-polar discrimination +/-60º (dB) >10 >10

VSWR <1.5:1 <1.5:1

Isolation between inputs (dB) >30 >30

Isolation between bands (dB) >30

Antenna Efficency* 92 % 93 %

Inter modulation, IM3 (dBc) >153 @2x43 dBm

Nominal impedance 50 Ω

Max power per input 500 W

Mechanical specification:

Connectors 6 x 7/16 female

Connector position Bottom

Lightning protection DC grounded

Height/Width/Depth mm (in) 2060 (81.1) / 412 (16.2) / 200 (7.8)

Antenna weight kg (lb) 44 (97.8)

Wind load at 42 m/s (94 mph)

Frontal: 856 N (192.4 lbf)

Lateral: 275 N (61.8 lbf)

Rear: 1050 N (236.0 lbf)

Survival wind speed 60 m/s (134 mph)

Colour radome Light Grey, RAL 7035

Radome material ASA

Mounting hardware:

Mounting bracket 2

Bracket weight (complete) 7.0 kg (15.6 lb)

Pole diameter 45-120 mm (1.8-4.7 in)

Tilt bracket 0º - 5º mechanical

Ordering Information:

MET Version 110350

RET Version 110355

* Based on true measurements and calculated according to P rad/Pin.

Hex-Port Antenna