cm-7000 d2a digital to analog converter · defi nition (hd) to standard defi nition (sd)...

2
• Converts all HD (high denition) video formats into SD (standard denition) format • Easy installation and operation • Automatic and manual programming • Electronic Program Guide (EPG) support • On Screen Display (OSD) • Closed Caption (CC) • Full function remote control • Low power consumption • Auto-Sleep function FEATURES The Channel Master by PCT CM-7000 is a high quality digital ATSC high denition (HD) to standard denition (SD) television converter box for direct terrestrial FTA HD reception allowing the user to view HD programs on standard denition TV sets. The combination of a CM-7000 Digital Analog Converter with a Channel Master digital antenna is a perfect solution for terrestrial reception in a very wide range of reception conditions and landscape relief. For energy saving, which is in compliance with NTIA recommendations, the Auto-Sleep Function activates Standby mode four (4) hours after last user entry from the remote control, but not before the end of a currently viewed event. FCC Mandate - February 2009 Channel Master a division of PCT International, Inc. CALL +1.866.430.1307 (toll free US & Canada) +1.919.934.7078 www.pctinternational.com/channelmaster by PCT by PCT Taking Taking Orders Orders NOW! NOW! Model CM-7000

Upload: others

Post on 14-Mar-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CM-7000 D2A DIGITAL TO ANALOG CONVERTER · defi nition (HD) to standard defi nition (SD) television converter box for direct terrestrial FTA HD reception allowing the user to view

• Converts all HD (high defi nition) video formats into SD (standard defi nition) format

• Easy installation and operation• Automatic and manual

programming

• Electronic Program Guide (EPG) support

• On Screen Display (OSD)• Closed Caption (CC)• Full function remote control• Low power consumption• Auto-Sleep function

F E A T U R E S

The Channel Master by PCT CM-7000 is a high quality digital ATSC high defi nition (HD) to standard defi nition (SD) television converter box for direct terrestrial FTA HD reception allowing the user to view HD programs on standard defi nition TV sets.

The combination of a CM-7000 Digital Analog Converter with a Channel Master digital antenna is a perfect solution for terrestrial reception in a very wide range of reception conditions and landscape relief.

For energy saving, which is in compliance with NTIA recommendations, the Auto-Sleep Function activates Standby mode four (4) hours after last user entry from the remote control, but not before the end of a currently viewed event.

FCC Mandate - February 2009

Channel Mastera division ofPCT International, Inc.

CALL+1.866.430.1307

(toll free US & Canada)

+1.919.934.7078

w w w . p c t i n t e r n a t i o n a l . c o m / c h a n n e l m a s t e r

by PCTby PCT

T a k i n gT a k i n gO r d e r sO r d e r sN O W !N O W !

ModelCM-7000

Page 2: CM-7000 D2A DIGITAL TO ANALOG CONVERTER · defi nition (HD) to standard defi nition (SD) television converter box for direct terrestrial FTA HD reception allowing the user to view

C O N N E C T I N G C M - 7 0 0 0 T O A T V U S I N G R F C O A X I A L C A B L E

ANT INCVBS L R

TVCM-7000

Terrestrial Antenna(outdoor or indoor)

RF Coaxial Cable

Mute Set volume to mute. Toggles mute on / off.

Option Not used.

Info Invokes the information banner.

Standby Enters and exits standby mode.

Menu Invokes Menu screen. Exit to previous Menu item.

FAV Invokes Channel List menu. Switches between Channel List and Favorites List.

Exit Exit from Menu.

Arrow Up Move focused item in menu or channel list.

Arrow Down Move focused item in menu or channel map.

Arrow Left Switch to Favorite Channel List in Channel List Menu. Change selection in menu. Switch to the next channel in EPG screen.

Arrow Right Switch to Favorite Channel List in Channel List Menu. Change selection in menu. Switch to the previous channel in EPG screen.

S P E C I F I C A T I O N S

R E M O T E C O N T R O L

TUNER

Frequency Range 54 to 864 MHz

Input Impedance 75 Ohm

Input Connector F-Type, Female

Channel Bandwith 6 MHz

Input Dynamic Range -83 to -5 dBM / SNR - 15 dB

DEMODULATOR

Type 8VSB / ATSC A/53 compliant

Performance ATSC A/74 compliant

Input Video Formats 1080i, 720p, 480i, 480;

VIDEO

Output Format 480i

Aspect Ratio 4:3 / 16:9 with letter box pan and scan

CONNECTORS

Video

Composite Video RCA

Component Video S-Video

Audio

Left / Right RCA

Coaxial RCA

RF MODULATOR

Output RF Connector F-Type, Female

Channel 3 / 4, Selectable

POWER

Supply 120 VAC / 60 Hz

Consumption “ON” 8 W

Consumption “STANDBY”

2 W

GENERAL

Dimensions(W x L x H)

22 x 16 x 4 cm(8.7 x 6.3 x 1.6 in)

Weight 0.9 kg / 2.0 lbs

ENVIRONMENT

Operating Temperature 0 to 60° C / 32 to 140° F

Relative Humidity 10 to 90% noncondensing

OK Select a channel or menu option.

Back Switch to previously viewed channel.

PgU Unused.

PgD Unused.

0 - 9 Numeric key to change channel number or numeric value.

CH + Channel up.

CH - Channel down.

Vol + Increase volume.

Vol - Decrease volume.

Audio Select audio.

Wide Select picture shape.

Subtitle Select Closed Caption (CC).

Text Unused.

Guide Invokes the EPG screen.

Universal Remote Code

For universal remote, use Pioneer Cable Box code.

www.pctinternational.com/channelmaster

© 2007-2008 Channel Master by PCT, a division of PCT International, Inc. All rights reserved. The Channel Master trademark is used under license. Pub PCTCM 200801a.CM7000.DS

Channel Master by PCTa division of PCT International, Inc.1315 Industrial Park DriveSmithfi eld, NC 27577-6024USAToll Free +1.866.430.1307Tel +1.919.934.7078Fax +1.919.934.2809