(click on link(s) below to jump to page) - wordpress.com · tfc/amphenol’s superior connector...

Specifications subject to change without noticeCustomers are reminded that they are SOLELY responsible for confimring that Times Fiber Communications

products are properly installed and used in accordance with all applicable codes and regulations.Broadband Interconnect Solutions

CATV Semiflex Connectors

Click Here to Go to Table of Contents


products are properly installed and used in accordance with all applicable codes and regulations.

Hardline/Semiflex Connectors

Features and Specifications 2-3Pin 4Splice 5Feedthru 6Hardline/Semiflex to F Male 7Hardline/Semiflex to F Female 8Straight and 180o Extension Adapters 990o Adapters 10Miscellaneous Adapters 11-12Cable Preparation 13Assembly Instruction 14-16

Hardline/Semiflex Reference Section

Part Number Cross Reference 17-19

Hardline/Semiflex Technical Section

Connector Weights 20Connector Hex Sizes 20Connector Specifications 21Cable Retention Specification 21Packaging Information 22

Reference Section

Part Number Index 23-25

Ordering Information

To obtain information on price and delivery call Times FiberCommunications, Inc. at Wallingford, CT

Direct800-677-2288203-265-8500

Fax Number203-265-8422

Specifications

Specifications in this document are subject to change withoutnotice. Contact your TFC\Amphenol sales representative for thelatest specifications.

Amphenol is a registered trademark of AmphenolCorporation.

Contents(Click on Link(s) Below to Jump to Page)



Hardline/Semiflex Cable Connectors

TFC/Amphenol Broadband Semiflex Connectors

TFC/Amphenol’s hardline/semiflex connectors utilize aunique three piece design resulting in unparalleled electri-cal performance, long-term reliability and installation-friendlyfeatures. They meet or exceed all SCTE, Bellcore and otherkey industry performance and environmental specifications.

Unmatched Electrical Performance

TFC/Amphenol hardline/semiflex connectors guarantee aminimum 30 dB return loss up to 1 GHz. In contrast to TFC/Amphenol’s unique proprietary three piece design, all com-peting two and three piece semiflex connectors employ aback nut gripping mechanism, which clamps outer and cen-ter conductors while simultaneously dragging the cable for-ward. This increases the likelihood of the center conductorbending during installation - resulting in return loss degra-dation.

TFC/Amphenol’s three piece connector design provides vis-ibility to the center conductor entry during installation, mini-mizing the potential for the center conductor to be bent, amore likely occurrence in a two piece design with blind cableentry.

Superior Long-Term Reliability

TFC/Amphenol’s patented three piece connector design pro-vides independent control of gripping the center and outerconductors of the cable. The gripping of each conductor em-ploys only four components, thereby minimizing manufac-turing tolerance buildup. This contrasts sharply with typicaltwo piece designs where up to seven or even more compo-nents try to achieve simultaneous gripping of the center andouter conductors, but with enormous tolerance buildup. Asa result, wide variations in clamping pressure typically oc-cur, with the additional risk of underseizing the center con-ductor. This, in turn, causes center conductor “suck-out”problems and consequential system failure. The true non-

rotational feature of TFC/Amphenol’s three piece semiflexconnector design reduces installation stresses, therefore en-hancing the reliability of the network. This significant advan-tage is achieved by taking the gripping fingers out of theback nut and placing them in the middle nut. The middle nutis stationary during outer conductor clamping, while the ro-tating ramp in the back nut forces the fingers down on to thecable in a smooth linear motion.

Marker 1 = Front Marker 2 = Rear

TFC/Amphenol Three Piece Design

Competitor A Three Piece Design

Competitor B Two Piece Design

2

10 mU/ REF=ØU

77 OHM

75 OHM

73 OHM

START Ø = STOP 2 ns

10 mU/ REF=ØU

77 OHM

75 OHM

73 OHM


10 mU/ REF=ØU

77 OHM

75 OHM

73 OHM


Click Here to Return to Table of Contents


products are properly installed and used in accordance with all applicable codes and regulations. 3


Hardline/Semiflex Cable Connectors Specifications

Easier Installation and Reusability

TFC/Amphenol’s superior connector design incorporates aunique gripping mechanism which results in the reducedinstallation torque (less than 25 ft. lbs.) and repeated use.The connector design eliminates the single-slotted alumi-num C-ring used by others and replaces it with a six slottedbrass gripper. The multiple slotted brass material producesa reusable, recoverable low torque action which gives theinstaller the most user-friendly features available today.

Other installation-friendly features include slim body designfor confined spaces, one wrench size, and a metal-to-metalpositive stop to eliminate over and undertightening of theconnector.

The HFC networks being planned and built by the majorMSOs and telcos cannot afford the compromise of inferiorinfrastructure when burdened with carrying life line telephonyand data traffic. TFC/Amphenol’s hardline/semiflex connec-tors are truly high performance devices, designed to meetthe information carriage and reliability requirements oftomorrow’s digital HFC networks.

LEGEND

Hardline/Semiflex Product Guide

• CH = Pin Type• SP = Splice Type• B = Feedthru• AFM = F Male to Semiflex Adapter• BAFF = F Female to Semiflex Adapter

Cable Type Codes

• TX = Times Fiber TX SeriesCable Sizes 565, 700, 840, 1160

• TX15 = Flexible Feeder Series• T10/P3 = Times Fiber T10 and Commscope P3 Series

Cable Sizes 412, 500, 625, 750, 875, 1000• MC = Trilogy MC2 Series

Cable Sizes 440, 500, 650, 750, 1000• QR = Commscope QR Series

Cable Sizes 540, 715, 860, 1125• P1 = Commscope P1 Series and Northern Electric

Cable Sizes 412, 500, 750

SPECIFICATIONS*

ELECTRICAL

MECHANICAL

ENVIRONMENTAL

MATERIAL & FINISH

Impedance 75 Ohm

Return Loss > 30 dB @ 1.0 GHzInsertion Loss < 0.2 dB @ 1.0 GHz

Mating Pin type has standard5/8-24 UNEF thread.Full cable retentionover temperature range.

Temperature range - 40oF (-

40

oC) to

+140oF (+

60

oC)

Copolymer of Styrene:- 55

oC to +

85

oC

Corrosion Designed to meetASTM B 117 336 Hr.corrosion test whenassembled into cable

Materials Aluminum 6262 type Brass Alloys to QQQ-B-626 Plastics To various specifications O-Rings Ethylene propylene

Finishes Aluminum Chromate conversion Brass Nickel plate





Pin ConnectorsFeatures• > 30dB return loss.

• Easy three-piece assembly greatly reduces installation errors.

• Non-rotational design prevents expansion loop from turning.

• Positive stops to prevent excessive torque and cable deformation.

• Low installation torque.

• Meets all SCTE specifications.

• Two inch long pins standard.

• Date stamped for manufacturing/customer control

TFC/Amphenol pin connectors are available for all popular 75 ohmsemiflex cables. They fit all 5/8-24 chassis port equipment, includ-ing amplifiers, line extenders, power supply ports, taps and passives.

TFC/Amphenol pin connectors are the absolute best performingconnectors available, both mechanically and electrically, at an af-fordable price. Featuring a three piece design, the outer conductorgripping mechanism is in the middle nut of the connector, not in theturning back nut. This ensures that the cable does not twist andturn during installation. Long pins (2.0 in) are standard to guaran-tee that each connector fits every manufacturer’s equipment. Con-stant impedance provides superior electrical continuity to your con-nections and your system.

Pin Connectors

Cable TypeACC-412CHT10ACC-500CHT10ACC-625CHT10ACC-750CHT10ACC-875CHT10ACC-1000CHT10ACC-15CHT10U

ACC-565CHTXACC-700CHTXACC-840CHTXACC-1160CHTXACC-440CHMCACC-500CHMCACC-650CHMCACC-750CHMCACC-1000CHMCACC-540CHQRACC-715CHQRACC-860CHQRACC-1125CHQRACC-412CHP1ACC-500CHP1ACC-750CHP1

3.220 (82)3.220 (82)3.130 (80)3.220 (82)3.220 (82)3.220 (82)3.220 (82)

3.130 (80)3.130 (80)3.220 (82)3.220 (82)3.220 (82)3.220 (82)3.340 (85)3.340 (85)3.340 (85)3.220 (82)3.130 (80)3.130 (80)3.130 (80)3.130 (80)3.130 (80)3.220 (82)

1.090 (28)1.090 (28)1.250 (28)1.370 (35)1.500 (38)1.625 (41)1.090 (28)

1.250 (32)1.370 (35)1.500 (38)1.875 (48)1.090 (28)1.090 (28)1.370 (35)1.500 (38)1.875 (48)1.250 (32)1.500 (38)1.625 (41)1.875 (48)1.090 (28)1.090 (28)1.370 (35)

1.000 (25)1.000 (25)1.125 (29)1.250 (32)1.375 (35)1.500 (38)1.000 (25)

1.125 (29)1.250 (32)1.375 (35)1.750 (44)1.000 (25)1.000 (25)1.250 (32)1.375 (35)1.750 (44)1.125 (29)1.375 (35)1.500 (38)1.750 (44)1.000 (25)1.000 (25)1.250 (32)

TFC T-10/Commscope P3

Commscope P1/Northern Electric

TFC TX10

Dimensions, inches (mm)A B C

AmphenolNumber

Trilogy MC2

Commscope QR

Extensions available in 1.5” increments

TFC TX Flexible Feeder

4

TFC Power Feeder Contact your local sales representative for specifications





Splice ConnectorsFeatures• > 30dB return loss.


• Non-rotational design prevents cable from turning.

• Positive stops to prevent excessive torque.


• Meets all SCTE specifications


Splice Connectors

Cable TypeACC-412SPT10ACC-500SPT10ACC-625SPT10ACC-750SPT10ACC-875SPT10ACC-1000SPT10ACC-15SPT10U

ACC-565SPTXACC-700SPTXACC-840SPTXACC-1160SPTXACC-440SPMCACC-500SPMCACC-650SPMCACC-750SPMCACC-1000SPMCACC-540SPQRACC-715SPQRACC-860SPQRACC-1125SPQRACC-412SPP1ACC-500SPP1ACC-750SPP1

5.840 (148)5.840 (148)5.840 (148)6.040 (153)6.040 (153)6.040 (148)5.840 (148)

6.040 (148)6.040 (148)6.040 (148)5.840 (148)5.840 (148)6.040 (148)6.040 (148)6.040 (148)6.100 (155)6.270 (159)6.270 (159)6.300 (160)6.300 (160)5.840 (148)5.840 (148)6.040 (153)

1.090 (28)1.090 (28)1.250 (28)1.370 (35)1.500 (38)1.625 (41)1.090 (28)

1.250 (32)1.370 (35)1.500 (38)1.875 (48)1.090 (28)1.090 (28)1.370 (35)1.500 (38)1.875 (48)1.250 (32)1.500 (38)1.625 (41)1.875 (48)1.090 (28)1.090 (28)1.370 (35)

1.000 (25)1.000 (25)1.125 (29)1.250 (32)1.375 (35)1.500 (38)1.000 (25)

1.125 (29)1.250 (32)1.375 (35)1.750 (44)1.000 (25)1.000 (25)1.250 (32)1.375 (35)1.750 (44)1.125 (29)1.375 (35)1.500 (38)1.750 (44)1.000 (25)1.000 (25)1.250 (32)



TFC Power Feeder


AmphenolNumber

Trilogy MC2

Commscope QR

TFC/Amphenol’s splice connector is utilized when joining two similarsize cables together. All seizing of the center conductor and outerconductor is done independently using TFC/Amphenol’s unique threepiece connector concept. It features the non-rotational design, posi-tive stop installation and superior electrical performance.


5

HEX SIZE = C

TFC TX10Contact your local sales representative for specifications





Feedthru ConnectorsFeatures• Non-rotational design prevents expansion loop from turning.



• Meets SCTE specifications


The two piece feedthru connector is a device that fits all 5/8-24UNEF thread type port interfaces. The cable center conductor ex-tends through the connector and is retained within the housing.TFC/Amphenol’s feedthru type connector retains all advantages ofthe non-rotational design, maintaining superior shielding effective-ness with an integral sleeve and positive stop installation.

Feedthru Connectors

Cable TypeACC-500BT10ACC-565BTXACC-540BQR

1.090 (28)1.250 (32)1.250 (28)

1.000 (25)1.125 (29)1.125 (29)

TFC T-10/Commscope P3TFC TX10


AmphenolNumber

Commscope QR

2.155 (55)2.155 (55)2.155 (55

6





Hardline/Semiflex to F Male ConnectorsFeatures• > 30dB return loss.







The F male connectors are available for all popular 75 ohm semiflexcables. They allow the direct connection of semiflex cables to Fdrop female ports.

The F male connector comes with a center conductor grippingmechanism that is in the body of the connector. It also maintains allof the important installation and performance advantages of TFC/Amphenol’s unique three piece pin connector.

Hardline/Semiflex to F Adapters

Cable TypeACC-412AFMT10ACC-500AFMT10ACC-625AFMT10ACC-750AFMT10ACC-875AFMT10ACC-1000AFMT10ACC-15AFMT10UACC-565AFMTXACC-700AFMTXACC-840AFMTXACC-1160AFMTXACC-500AFMMCACC-650AFMMCACC-750AFMMCACC-540AFMQRACC-715AFMQRACC-860AFMQRACC-1125AFMQR

2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)2.850 (72)3.000 (76)3.100 (79)3.100 (79)3.200 (81)

1.090 (28)1.090 (28)1.250 (28)1.370 (35)1.500 (38)1.625 (41)1.090 (28)1.250 (32)1.370 (35)1.500 (38)1.875 (48)1.090 (28)1.370 (35)1.500 (38)1.250 (32)1.500 (38)1.625 (41)1.875 (48)

1.000 (25)1.000 (25)1.125 (29)1.250 (32)1.375 (35)1.500 (38)1.000 (25)1.125 (29)1.250 (32)1.375 (35)1.750 (44)1.000 (25)1.250 (32)1.375 (35)1.125 (29)1.375 (35)1.500 (38)1.750 (44)


TFC TX10


AmphenolNumber

Trilogy MC2

Commscope QR






Hardline/Semiflex to F Female ConnectorsFeatures• > 30dB return loss.







The F female connectors are available for all popular 75 ohmsemiflex cables. Center conductor tolerant, they accept a majorityof F drop male connectors and allow for drop cable to be spliced tothe semiflex coax.

The F female connector comes with a center conductor grippingmechanism that is in the body of the connector. It also maintains allof the important installation and performance advantages of TFC/Amphenol’s unique three piece pin connector.

Hardline/Semiflex to F Adapters

Cable TypeACC-412BAFFT10ACC-500BAFFT10ACC-625BAFFT10ACC-750BAFFT10ACC-875BAFFT10ACC-1000BAFFT10ACC-565BAFFTXACC-700BAFFTXACC-840BAFFTXACC-1160BAFFTXACC-500BAFFMCACC-650BAFFMCACC-750BAFFMCACC-540BAFFQRACC-715BAFFQRACC-860BAFFQRACC-1125BAFFQRACC-412BAFFP1

3.130 (80)3.130 (80)3.130 (80)3.220 (82)3.220 (82)3.220 (82)3.130 (80)3.220 (82)3.220 (82)3.220 (82)3.130 (80)3.220 (82)3.220 (82)3.220 (82)3.340 (85)3.340 (85)3.340 (85)3.130 (80)

1.090 (28)1.090 (28)1.250 (28)1.370 (35)1.500 (38)1.625 (41)1.250 (32)1.370 (35)1.500 (38)1.875 (48)1.090 (28)1.370 (35)1.500 (38)1.250 (32)1.500 (38)1.625 (41)1.875 (48)1.090 (28)

1.000 (25)1.000 (25)1.125 (29)1.250 (32)1.375 (35)1.500 (38)1.125 (29)1.250 (32)1.375 (35)1.750 (44)1.000 (25)1.250 (32)1.375 (35)1.125 (29)1.375 (35)1.500 (38)1.750 (44)1.000 (25)



TFC TX10


AmphenolNumber

Trilogy MC2

Commscope QR

8





Adapters

Adapters

DescriptionACC-15EXTACC-30EXTACC-45EXTACC-60EXTACC-90EXTACC-120EXT

1.5 (38)3.0 (76)4.5 (114)6.0 (152)9.0 (229)12.0 (305)

Dimensions, inches (mm)A

AmphenolNumber

Straight ExtensionStraight ExtensionStraight ExtensionStraight ExtensionStraight ExtensionStraight Extension

Fig.111111

DescriptionACC-18015EXTACC-18015EXT-SACC-18030EXTACC-18030EXT-SACC-18045EXTACC-18045EXT-SACC-18060EXTACC-18060EXT-S

3.1 (79)3.1 (79)4.6 (117)4.6 (117)6.1 (155)6.1 (155)7.6 (193)7.6 (193)


AmphenolNumber

180o

180o

180o

180o

180o

180o

180o

180o

Fig.22222222

Fig. 1 Fig. 2

Straight Extension AdapterACC-XXEXT

SIEZURELESS

180o Adapter *

ACC-180XXEXTACC-180XXEXT-S (SIEZURELESS)

9

* 3/8” CENTER PIN TRIM GAUGE ON BODY





Adapters

DescriptionACC-90

ACC-90-S

ACC-9015EXT

ACC-9015EXT-S

ACC-9030EXT

ACC-9030EXT-S

ACC-9045EXT

ACC-9045EXT-S

ACC-9060EXT

ACC-9060EXT-S

ACC-SW9015EXT

ACC-SW9015EXT-S

ACC-SW9030EXT

ACC-SW9030EXT-S

ACC-SW9045EXT

ACC-SW9045EXT-S

ACC-SW9060EXT

ACC-SW9060EXT-S

ACC-SW9090EXT

ACC-SW9090EXT-S

1.5 (38)1.5 (38)3.0 (76)3.0 (76)4.5 (114)4.5 (114)6.0 (152)6.0 (152)9.0 (229)9.0 (229)2.8 (71)2.8 (71)4.3 (109)4.3 (109)1.0 (25)1.0 (25)1.0 (25)1.0 (25)9.0 (229)9.0 (229)


AmphenolNumber

90o Extension

90o Extension

90o Extension

90o Extension90

o Extension

90o Extension

90o Extension

90o Extension

90o Extension

90o Extension90

o Swivel Extension

90o Swivel Extension




90o Swivel Extension90

o Swivel Extension




Fig.22222222222222222222

DescriptionACC-90ACC-90-SACC-SW90ACC-SW90-S

1.0 (25)1.0 (25)1.3 (33)1.3 (33)


AmphenolNumber

90o

90o

90oSwivel90

oSwivel

Fig.1111

Fig. 1 Fig. 2

90o Adapter *

ACC-90ACC-90-S (SIEZURELESS)

90o Swivel Adapter *ACC-SW90

ACC-SW90-S (SIEZURELESS)

90o Adapter *

ACC-90XXEXTACC-90XXEXT-S (SIEZURELESS)

90o Swivel Extension Adapter *

ACC-SW90XXEXTACC-SW90XXEXT-S (SIEZURELESS)

Receives Pin Lengthof 3/8 Inch (10mm).


Adapters

10

* 3/8” CENTER PIN TRIM GAUGE ON BODY





Adapters

DescriptionACC-HSGHSGNRACC-HSGHSGFACC-PSB-01ACC-PSB-SACC-TRM-01

AmphenolNumber

Male to Male AdapterFemale to Female AdapterPedestal Splice BlockPSB-SiezurelessPort Terminator

Fig.12334

Fig. 1 Fig. 2

Housing to Housing AdapterACC-HSGHSGNR

Chassis to Chassis AdapterACC-HSGHSGF

Fig. 3 Fig. 4

Pedestal Splice BlockACC-PSB-01

ACC-PSB-S (SIEZURELESS)

TerminatorACC-TRM-01



Miscellaneous Adapters

VOLTAGERATING

1000 VOLTS

11





Fig. 1 Fig. 2

F Male to Pin ConnectorACC-AFM

F Female to Pin ConnectorACC-BAFF

ACC-BAFF-GND (GROUNDED)

Fig. 3 Fig. 4

F Female to Housing with Power PassingACC-F625CH

F Female to Housing with Power BlockingACC-F625CHDCB

Adapters

DescriptionACC-AFMACC-BAFFACC-BAFF-GNDACC-F625CHACC-F625CHDCB

AmphenolNumber

F Male to Pin ConnectorF Female to Pin ConnectorF Female to Pin Connector GroundedF Female to Housing w/ White Insulator IdentifierF Male to Housing w/ Power Block w/ Red Insulator Identifier

Fig.12234

Miscellaneous Adapters

VOLTAGERATING

1000 VOLTS

12

BAFF-GND BAFF





Assembly InstructionsCABLE PREPARATION

Cable preparation dimensions for pin connectors, splice connectors and semiflex to F adapters.

Cable Size1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)

0.875 (22)0.875 (22)0.875 (22)0.875 (22)0.875 (22)1.250 (32)0.875 (22)0.875 (22)0.875 (22)1.250 (32)0.875 (22)0.875 (22)0.875 (22)0.875 (22)1.250 (32)1.250 (28)1.250 (28)1.250 (28)1.250 (32)

3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)3.000 (76)0.500 (13)0.625 (16)0.625 (16)0.625 (16)


Cable preparation dimensions for feedthru connectors.

Fig.412T10/P3500T10/P3625T10/P3750T10/P3875T10/P31000T10/P3565TX700TX840TX1160TX440MC2500MC2650MC2750MC21000MC2540QR715QR860QR1125QR

1111111111111112222

Cable Size1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)1.000 (25)

0.875 (22)0.875 (22)0.875 (22)0.875 (22)0.875 (22)0.875 (22)1.250 (32)

2.000 (51)2.000 (51)2.000 (51)2.000 (51)2.000 (51)2.000 (51)0.500 (13)

Dimensions, inches (mm)A B CFig.

412T10/P3500T10/P3625T10/P3565TX440MC2500MC2540QR

1111112

13





Assembly InstructionsPIN CONNECTORS

Step 1 Read all instructions before starting assembly procedure.

Step 2 Prepare the cable as shown in Figures 1 and 2 using the appropriate cable prep tools. Expose the cable center conductor to the length shown in the table (A) or use the trim guide on the connector body. Be sure the center conductor has been cleaned to the copper layer using wooden or plastic scrapers. Do not scratch, cut or dent the copper layer. Core depth (B) is shown in the table and can easily be achieved with a standard coring tool. Trim cable jacket to the length given in the table (C). Utilize the jacket stripping tool provided with the coring tool (no knives). Do not cut or dent the aluminum outer conductor while removing the weather jacket.

Step 3 Remove the connector body from the connector assembly and thread into mating receptacle. If there is a set screw in the receptacle, do not tighten now (this is done last). Tighten connector body to equipment manufacturer’s recommendation.

Step 4 If heat shrink or air shrink is to be used, place it over the cable now.

Step 5 Slide the back nut and the middle nut over the cable outer conductor and jacket until the middle nut bottoms against the end of the cable outer conductor.

Step 6 Guide the cable center conductor into the center contact of the connector body and hand tighten the middle nut while maintaining pressure on the cable in the direction of the housing. Place a backup wrench on the connector body and tighten the middle nut until the positive stop (metal to metal) is reached.

Step 7 Place a backup wrench on the middle nut and tighten the back nut until the positive stop (metal to metal) is reached.

Step 8 If using heat shrink or air shrink, install over the connector/equipment port. Shrink according to the manufacturer’s recommendation.

14





Assembly InstructionsSPLICE CONNECTORS


Step 2 Prepare the cable as shown in Figures 1 and 2 using the appropriate cable prep tools. Expose the cable center conductor to the length shown in the table (A) or use the trim guide on the connector body. Be sure the center conductor has been cleaned to the copper layer using wooden or plastic scrapers. Do not scratch, cut or dent the copper layer. Core depth (B) is shown in the table and can easily be achieved with a standard coring tool. Trim cable jacket to the length given in the table (C). Utilize the jacket stripping tool provided with the coring tool (no knives). Do not cut or dent the aluminum outer conductor while removing the weather jacket.


Step 4 Slide the back nut and the middle nut over the cable outer conductor and jacket until the middle nut bottoms against the end of the cable outer conductor.

NOTE: It is important that the splice body not be allowed to rotate with respect to the cable.

Step 5 Guide the cable center conductor into the center contact of the connector body and hand tighten the middle nut while maintaining pressure towards the cable. Repeat this process on the second cable.

Step 6 Place a backup wrench on the splice body and tighten one middle nut until the positive (metal to metal) stop is reached. Repeat the process on the second nut. With both positive stops achieved on middle nuts, place a wrench on one middle nut and tighten the adjoining backnut to a positive stop. Repeat this process on the adjoining side.


15





Assembly InstructionsFEEDTHRU CONNECTORS


Step 2 Prepare the cable as recommended by the equipment manufacturer’s instructions using the appropriate cable prep tools. Be sure the center conductor has been leaned to the copper layer using wooden or plastic scrapers. Do not scratch, cut or dent the copper layer. Core depth (B) is shown in the table and can be easily be achieved with a standard coring tool. Trim cable jacket to the length given in the table (C). Utilize the jacket stripping tool provided with the coring tool (no knives). Do not cut or dent the aluminum outer conductor while removing the weather jacket.

Step 3 Remove the connector body from the connector assembly and thread into mating receptacle. If there is a set screw in the receptacle, do not tighten now (this is done last).Tighten connector body to equipment manufacturer’s recommendation.


Step 5 Slide the back nut over the cable outer conductor and insert the cable into the feedthru body until the outer conductor bottoms. If there is a set screw in the receptacle, do not tighten now (this is done last).

Step 6 Hand tighten the back nut to the feedthru body while maintaining pressure on the cable in the direction of the housing.

Step 7 Place a backup wrench on the middle nut and tighten the back nut until the positive stop (metal to metal) is reached.


16





Hardline/Semiflex Part Number Cross Reference

Splice Connectors

Pin ConnectorsTFC/Amphenol Part Number

T10/ P3 ConnectorsACC-500CHT10ACC-625CHT10ACC-875CHT10ACC-1000CHT10

TX10 ConnectorsACC-565CHTXACC-700CHTXACC-840CHTXACC-1160CHTX

TX Flexible Feeder ConnectorsACC-15CHT10U

QR ConnectorsACC-540CHQRACC-715CHQRACC-860CHQRACC-1125CHQR

MC2 ConnectorsACC-440CHMCACC-500CHMCACC-650CHMCACC-750CHMC

Cablecon PPC LRC 2 pc GilbertLRC 3 pc

PI-500-CH-3PI-625-CH-3PI-875-CH-3PI-1000-CH-3

PI-565-CH-TXPI-700-CH-TXPI-840-CH-TXPI-1160-CH-TX

-------

PI-540-CH-QRPI-715-CH-QRPI-860-CH-QRPI-1125-CH-QR

PI-440-CH-MCPI-500-CH-MCPI-650-CH-MCPI-750-CH-MCPI-1000-CH-MC

PP500P3TCPP625P3TCPP875P3TCPP1000P3TC

PP565TXTCPP700TXTCPP840TXTCPP1160TXTC

PP1015TX

LPP540QRTCLPP715QRTCLPP860QRTCLPP1125QRTC

PP440MC2TCLPP500MC2TCLPP650MC2TCLPP750MC2TCPP1000MC2TC

EI500K3EI625K3EI875K3EI1000K3

EI565TXEI700TXEI840TXEI1160TX

-------

EI540QREI715QREI860QREI1125QR

EI440MC2EI500MC2EI650MC2EI750MC2EI1000MC2

EF500W3EF625W3EF875W3EF1000W3

EF565TXEF700TXEF840TXEF1160TX

-------

EF540QREF715QREF860QREF1125QR

EF440MC2EF500MC2EF650MC2EF750MC2EF1000MC2

GRS-500-CH-DU-03GRS-625-CH-DU-02GRS-875-CH-DU-02GRS-1000-CH-DU-01

GRS-565-CH-TXGRS-700-CH-TXGRS-840-CH-TXGRS-1160-CH-TX

G-15Q-CH-TX(QUAD)G-15-CH-TX (60%,TRI)

GRS-540-CH-QRGRS-715-CH-QRGRS-860-CH-QRGRS-1125-CH-QR

GRS-440-CH-MC2GRS-500-CH-MC2GRS-650-CH-MC2GRS-750-CH-MC2GRS-1000-CH-MC2

TFC/Amphenol Part Number

T10/ P3 ConnectorsACC-500SPT10ACC-625SPT10ACC-750SPT10ACC-875SPT10ACC-1000SPT10

TX10 ConnectorsACC-565SPTXACC-700SPTXACC-840SPTXACC-1160SPTX

TX Flexible Feeder ConnectorsACC-15SPT10U

QR ConnectorsACC-540SPQRACC-715SPQRACC-860SPQRACC-1125SPQR

MC2 ConnectorsACC-440SPMCACC-500SPMCACC-650SPMCACC-750SPMC


PI-500-SP-3PI-625-SP-3PI-750-SP-3PI-875-SP-3PI-1000-SP-3

PI-565-SP-TXPI-700-SP-TXPI-840-SP-TXPI-1160-SP-TX

-------

PI-540-SP-QRPI-715-SP-QRPI-860-SP-QRPI-1125-SP-QR

PI-440-SP-MCPI-500-SP-MCPI-650-SP-MCPI-750-SP-MCPI-1000-SP-MC

PS500P3PS625P3PS750P3PS875P3PS1000P3

PS565TXPS700TXPS840TXPS1160TX

PS1015TX

LPS540QRLPS715QRLPS860QRLPS1125QR

PS440MC2LPS500MC2LPS650MC2LPS750MC2PS1000MC2

SI500K3SI625K3SI750K3SI875K3SI1000K3

SI565TXSI700TXSI840TXSI1160TX

-------

SI540QRSI715QRSI860QRSI1125QR

SI440MC2SI500MC2SI650MC2SI750MC2SI1000MC2

SFI500W3SFI625W3SFI750W3SFI875W3SFI1000W3

SFI565TXSFI700TXSFI840TXSFI1160TX

-------

SFI540QRSFI715QRSFI860QRSFI1125QR

SFI440MC2SFI500MC2SFI650MC2SFI750MC2SFI1000MC2

GRS-500-SP-DU-03GRS-625-SP-DU-02GRS-750-SP-DU-01GRS-875-SP-DU-02GRS-1000-SP-DU-01

GRS-565-SP-TXGRS-700-SP-TXGRS-840-SP-TXGRS-1160-SP-TX

G-15Q-SP-TX(QUAD)G-15-SP-TX (60%,TRI)

GRS-540-SP-QRGRS-715-SP-QRGRS-860-SP-QRGRS-1125-SP-QR

GRS-440-SP-MC2GRS-500-SP-MC2GRS-650-SP-MC2GRS-750-SP-MC2GRS-1000-SP-MC2

17




Hardline/Semiflex to F Male ConnectorsTFC/Amphenol Part Number

T-10/ P3 ConnectorsACC-500AFMT10ACC-625AFMT10ACC-750AFMT10ACC-875AFMT10ACC-1000AFMT10

TX10 ConnectorsACC-565AFMTXACC-700AFMTXACC-840AFMTXACC-1160AFMTX

TX Flexible Feeder ConnectorsACC-15AFMT10U

QR ConnectorsACC-540AFMQRACC-715AFMQRACC-860AFMQRACC-1125AFMQR

MC2 ConnectorsACC-500AFMMCACC-650AFMMCACC-750AFMMC


-----------------------------------

----------------------------

-------

----------------------------

---------------------

PP500FMP3PP625FMP3PP750FMP3PP875FMP3PP1000FMP3

PP565FMTXPP700FMTXPP840FMTXPP1160FMTX

PP1015FMTX

LPP540FMQRLPP715FMQRLPP860FMQRLPP1125FMQR

LPP500FMMC2LPP650FMMC2LPP750FMMC2

EI500FMK3EI625FMK3EI750FMK3EI875FMK3EI1000FMK3

EI565FMTXEI700FMTXEI840FMTXEI1160FMTX

-------

EI540FMQREI715FMQREI860FMQREI1125FMQR

EI500FMMC2EI650FMMC2EI750FMMC2

EFI500W3EFI625W3EFI750W3EFI875W3EFI1000W3

EFI565FMTXEFI700FMTXEFI840FMTXEFI1160FMTX

-------

EFI540FMQREFI715FMQREFI860FMQREFI1125FMQR

EFI500FMMC2EFI650FMMC2EFI750FMMC2

GRS-500-CH-DU-03GRS-625-CH-DU-02GRS-750-CH-DU-01GRS-875-CH-DU-02GRS-1000-CH-DU-01

GRS-565-AFM-TXGRS-700-AFM-TXGRS-840-AFM-TXGRS-1160-AFM-TX

G-15Q-AFM-TX(QUAD)G-15-AFM-TX(60%,TRI)

GRS-540-AFM-QRGRS-715-AFM-QRGRS-860-AFM-QRGRS-1125-AFM-QR

GRS-500-AFM-MC2GRS-650-AFM-MC2GRS-750-AFM-MC2

Feedthru ConnectorsTFC/Amphenol Part Number

T10/ P3 ConnectorsACC-500BT10

TX10 ConnectorsACC-565BTX

QR ConnectorsACC-540BQR


PI-500-CH-3

PI-565-CH-TX

PI-540-CH-QR

PF500

PF565TX

LPF540QR

EMI500P3

EMI565TX

EMI540QR

-------

-------

-------

GRS-500-B-DU-03

GRS-565-B-TX

GRS-540-B-QR



18






Hardline/Semiflex to F Female ConnectorsTFC/Amphenol Part Number

T-10/ P3 ConnectorsACC-500BAFFT10ACC-625BAFFT10ACC-750BAFFT10ACC-875BAFFT10ACC-1000BAFFT10

TX10 ConnectorsACC-565BAFFTXACC-700BAFFTXACC-840BAFFTXACC-1160BAFFTX

TX Flexible Feeder ConnectorsACC-15BAFFT10U

QR ConnectorsACC-540BAFFQRACC-715BAFFQRACC-860BAFFQRACC-1125BAFFQR

MC2 ConnectorsACC-500BAFFMCACC-650BAFFMCACC-750BAFFMC


-----------------------------------

----------------------------

-------

----------------------------

---------------------

PP500BAFFP3PP625BAFFP3PP750BAFFP3PP875BAFFP3PP1000BAFFP3

PP565BAFFP3PP700BAFFP3PP840BAFFP3PP1160BAFFP3

PP1015BAFFTX

LPP540BAFFQRLPP715BAFFQRLPP860BAFFQRLPP1125BAFFQR

LPP500BAFFMCLPP650BAFFMCLPP750BAFFMC

EI500FFK3EI625FFK3EI750FFK3EI875FFK3EI1000FFK3

EI565FFTXEI700FFTXEI840FFTXEI1160FFTX

-------

EI540FFQREI715FFQREI860FFQREI1125FFQR

EI500FFMC2EI650FFMC2EI750FFMC2

EFI500FFK3EFI625FFK3EFI750FFK3EFI875FFK3EFI1000FFK3

EFI565FFTXEFI700FFTXEFI840FFTXEFI1160FFTX

-------

EFI540FFQREFI715FFQREFI860FFQREFI1125FFQR

EFI500FFMC2EFI650FFMC2EFI750FFMC2

GRS-500-BAFF-DU-03GRS-625-BAFF-DU-02GRS-750-BAFF-DU-01GRS-875-BAFF-DU-02GRS-1000-BAFF-DU-01

GRS-565-BAFF-TXGRS-700-BAFF-TXGRS-840-BAFF-TXGRS-1160-BAFF-TX

G-15Q-BAFF-TX(QUAD)G-15-BAFF-TX(60%,TRI)

GRS-540-BAFF-QRGRS-715-BAFF-QRGRS-860-BAFF-QRGRS-1125-BAFF-QR

GRS-500-BAFF-MC2GRS-650-BAFF-MC2GRS-750-BAFF-MC2

AdaptersTFC/Amphenol Part Number

ACC-15EXTACC-30EXTACC-45EXTACC-60EXTACC-90EXTACC-120EXT

ACC-AFMACC-BAFF

ACC-F625CHDCBACC-F625CHACC-HSGHSGF

ACC-18015EXTACC-18030EXTACC-90ACC-9015EXTACC-9030EXTACC-9045EXT

ACC-PSB-01

ACC-TRM-01

Cablecon PPC LRC 2 pc LRC 3 pc

1.5” Extension3” Extension4.5” Extension6” Extension9” Extension12” Extension

AFM-AdapterBAFF-Adapter

F-625-CH-DCBF-625-CH-000KS-KS-F-0000

L-180-W/1.5L-180-W/3L-90L-90-W/1.5L-90-W/3L-90-W/4.5

P-SPB

TRM-0000000

------EXT EZ 3 TC------EXT EZ 6 TCEXT EZ 9 TC------

C CH AFMC CH BAFF

CF 61 625 PB TCCF 61 G1 A TCC KS KS HFS

CP PA 180 3.0 TCCP PA 180 TCCP 90 TCCP 90 1.5 TCCP 90 3 TCCP 90 4.5 TC

TSPB

UMTRTC

EXT1.75TC------EXT4.5TCEXT6.6TCEXT9.0=0TC------

------KS FF ADAP

F625BETCF625ETC------

EU180-3.0EU180-4.5EU90TCEU90-3.0TCEU90-4.5TCEU90-6.0TC

HSB

625TRBTC

------G-EXT-3-1-T------G-EXT-6-1-TG-EXT-9-1-TG-EXT-12-1-T

C-CH-AFMG-CH-BAFF-KS

GF-625-CH-DCB-TGF-625-CH-TG-KS-KS-F

GP-PA-3.0-TGP-PA-TGP-90-TGP-90-3.0-TGP-90-4.5-T------

G-SPB

GTR-M-T

19





Connector Weights

Pin ConnectorsPart Number

ACC-412CHT10ACC-500CHT10ACC-625CHT10ACC-750CHT10ACC-875CHT10ACC-1000CHT10

ACC-565CHTXACC-700CHTXACC-840CHTXACC-1160CHTX

ACC-500CHMCACC-650CHMCACC-1000CHMC

ACC-540CHQRACC-715CHQRACC-860CHQRACC-1125CHQR

Weight*, oz. (gm.)

4 (113)4 (113)5 (142)6 (170)7 (198)7 (198)

5 (142)6 (170)7 (198)8 (227)

4 (113)5 (142)8 (227)

5 (142)6 (170)7 (198)9 (255)

Splice ConnectorsPart Number

ACC-412SPT10ACC-500SPT10ACC-625SPT10ACC-750SPT10ACC-875SPT10ACC-1000SPT10

ACC-565SPTXACC-700SPTXACC-840SPTXACC-1160SPTX

ACC-500SPMCACC-650SPMCACC-1000SPMC

ACC-540SPQRACC-715SPQRACC-860SPQRACC-1125SPQR

Weight*, oz. (gm.)

7 (198) 7 (198) 8 (142)10 (283)11 (312)11 (312)

8 (142)10 (283)11 (312)12 (340)

7 (198) 8 (142)12 (340)

8 (142)10 (283)11 (312)13 (369)

Adapters & Misc.Part Number

ACC-440BMCACC-500BMCACC-500BT10ACC-540BQRACC-565BTXACC-625BT10

ACC-15EXTACC-90ACC-9030EXTACC-18030EXT

Weight*, oz. (gm.)

3 (85)3 (85)3 (85)4 (113)4 (113)4 (113)

2 (57)2 (57)5 (142)7 (198)

ACC-HSGHSGACC-PSB-S

ACC-TRMACC-AFMACC-BAFF

ACC-F625CHACC-F625CHDCB

3 (85)5 (142)

1 (28)1 (28)1 (28)

1 (28)1 (21)

Connector Hex SizesQUICK REFERENCE FOR PROPER WRENCHES

*All Weights Are Approximate Per Connector

Sizes are good for pins, splices, feedthrus,F male and F female.

Connector Type/Cable Size

.440MC

.500MC

.500T10

Hex Size,in. (mm.)

1.000 (25)

1.125 (28)

.540QR

.565TX

.625T10

.650MC

.715QR

.840TX

.875T101.375 (35)

.860QR1.00T10

1.500 (38)

1.000MC1.25QR1.160TX

1.750 (44)

ACC-PSB-01 5 (142)

ACC-BAFF-GND 1 (28)

20





Cable Size,in. (mm.)

.412-.440 (10-11)

Axial Forcelbs. (kN)

350 (1.6)

Pin Connector Specification Sheet

Cable Retention Specification

Applicable Part Numbers: ACC-XXX-CH-XXX

Measurement Test Method

Cable/Connector TorqueConnector/Interface TorquePollutantsChemical Resist

APH-TP-004GR-2846-CORE [36]TFC ETP036MGR-2846-CORE [15]GR-2846-CORE [21]GR-2846-CORE [38]GR-2846-CORE [40]

Specification

Shielding EffectivenessInsulation ResistanceVoltage WithstandingCable RetentionWater ImmersionCorrosion (Salt Spray)Pressure

TFC ETP029ETFC ETP030ETFC ETP031E

Mil-std-202 Method 302Mil-std-202 Method 301GR-2846-CORE [14]

ImpedenceReturn LossInsertion Loss

Not applicable. Positive stopNot applicable. Positive stop10 mΩ max. changeVisual using 10X magnification

>110 dB to 1 GHz5000 MΩ min.1kV min.See following table200 MΩ min.< 10 mΩ max. change40 psi min. (275 kPa)

75 +/- 2Ω>30 dB min.5-500 MHz -- 0.07dB

.500-.540 (13-14) 500 (2.2)

.700 (18) 650 (2.7)

.715 (18) 650 (2.9)

.565 (14) 575 (2.6)

.840 (21) 750 (3.3)

.875 (22) 800 (3.6)

1.160 (29) 1025 (4.6)1.000-1.125 (25-29) 950 (4.2)

.750 (19) 700 (3.1)

SCTE IPS-TP-403B1 Prelim)

501-750 MHz -- 0.10dB751-1000 MHz -- 0.20dB

21

.625 (16) 600 (2.7)

.860 (22) 795 (3.5)





22

Packaging Information

TFC/Amphenol Part Number Quantity Weight (lbs) TFC/Amphenol Part Number Quantity Weight (lbs)

Per Carton Per Carton Per Carton Per Carton

ACC-1000AFMT10 25 15 ACC-700BAFFTX 30 11

ACC-1000BAFFT10 25 15 ACC-700CHTX 50 20

ACC-1000CHT10 25 13 ACC-700SPTX 25 17

ACC-1000SPT10 25 25 ACC-715AFMQR 30 16

ACC-1125AFMQR 25 20 ACC-715BAFFQR 30 16

ACC-1125BAFFQR 25 19 ACC-715CHQR 50 24

ACC-1125CHQR 25 18 ACC-715SPQR 25 23

ACC-1125SPQR 25 33 ACC-750AFMT10 30 11

ACC-1160AFMTX 25 18 ACC-750BAFFT10 30 10

ACC-1160BAFFTX 25 17 ACC-750CHT10 50 18

ACC-1160CHTX 25 17 ACC-750SPT10 25 17

ACC-1160SPTX 25 30 ACC-840AFMTX 30 15

ACC-120EXT 48 30 ACC-840BAFFTX 30 12

ACC-15AFMT10U 30 14 ACC-840CHTX 50 22

ACC-15CHT10U 50 11 ACC-840SPTX 25 20

ACC-15EXT 48 5 ACC-860AFMQR 30 19

ACC-15SPT10U 48 21 ACC-860BAFFQR 30 15

ACC-18015EXT 34 13 ACC-860CHQR 50 28

ACC-18015EXT-S 34 13 ACC-860SPQR 25 26

ACC-18030EXT 28 14 ACC-875AFMT10 30 13

ACC-18030EXT-S 28 14 ACC-875BAFFT10 30 12

ACC-18045EXT 24 13 ACC-875CHT10 50 12

ACC-18045EXT-S 24 13 ACC-875SPT10 25 20

ACC-18060EXT 18 13 ACC-90 48 7

ACC-18060EXT-S 18 13 ACC-9015EXT 48 12

ACC-18075EXT 12 14 ACC-9015EXT-S 48 12

ACC-18090EXT 10 13 ACC-9030EXT 48 16

ACC-30EXT 48 8 ACC-9030EXT-S 48 16

ACC-45EXT 48 12 ACC-9045EXT 48 20

ACC-500SPT10 48 21 ACC-9045EXT-S 48 20

ACC-500SPT1015U 48 21 ACC-9060EXT 48 24

ACC-540AFMQR 30 19 ACC-9060EXT-S 48 24

ACC-540BAFFQR 30 17 ACC-9075EXT 48 28

ACC-540BQR 48 12 ACC-9090EXT 48 32

ACC-540CHQR 50 17 ACC-90EXT 48 19

ACC-540SPQR 48 28 ACC-90-S 48 7

ACC-565BAFFTX 30 16 ACC-AFM 100 6

ACC-565AFMTX 30 16 ACC-BAFF 100 4

ACC-565BTX 48 11 ACC-F625CH 48 4

ACC-565CHTX 50 15 ACC-F625CHDCB 48 4

ACC-565AFMTX 30 11 ACC-HSGHSGF 48 4

ACC-565SPTX 48 27 ACC-HSGHSGNR 48 9

ACC-60EXT 48 16 ACC-PSB-01 48 9

ACC-625AFMT10 30 17 ACC-PSB-S 48 15

ACC-625BAFFT10 30 16 ACC-SW90 48 8

ACC-625BT10 48 11 ACC-SW90-S 48 7

ACC-625CHP20 50 15 ACC-SW9015EXT 48 12

ACC-625CHT10 50 15 ACC-SW9015EXT-S 48 12

ACC-625SPP20 48 26 ACC-SW9030EXT 48 16

ACC-625SPT10 48 27 ACC-SW9030EXT-S 48 16

ACC-700AFMTX 30 11 ACC-TRM-01 48 3

Contact your local TFC/Amphenol sales representative for connectors not listed





Part Number Index

TFC/AMPHENOLPART NUMBER DESCRIPTION

Hardline/Semiflex Connectors/Adapters for TFC T10 and CommScope PIII CablesACC-412CHT10ACC-412SPT10ACC-412BAFFT10ACC-500CHT10ACC-500BT10ACC-500SPT10ACC-500AFMT10ACC-500BAFFT10ACC-625CHT10ACC-625SPT10ACC-625AFMT10ACC-625BAFFT10ACC-750CHT10ACC-750SPT10ACC-750AFMT10ACC-750BAFFT10ACC-875CHT10ACC-875SPT10ACC-875AFMT10ACC-875BAFFT10ACC-1000CHT10ACC-1000SPT10ACC-1000AFMT10ACC-1000BAFFT10

Hardline/Semiflex Connectors/Adapters for TFC TX10 CablesACC-565CHTXACC-565BTXACC-565SPTXACC-565AFMTXACC-565BAFFTXACC-700CHTXACC-700SPTXACC-700AFMTXACC-700AFMTXACC-840CHTXACC-840SPTXACC-840AFMTXACC-840BAFFTXACC-1160CHTXACC-1160SPTXACC-1160AFMTXACC-1160BAFFTX

PAGENO.

412 cable, pin connector412 cable, splice connector412 cable, hardline to F female adapter500 cable, pin connector500 cable, splice connector500 cable, feedthru connector500 cable, hardline to F male adapter500 cable, hardline to F female adapter625 cable, pin connector625 cable, splice connector625 cable, hardline to F male adapter625 cable, hardline to F female adapter750 cable, pin connector750 cable, splice connector750 cable, hardline to F male adapter750 cable, hardline to F female adapter875 cable, pin connector875 cable, splice connector875 cable, hardline to F male adapter875 cable, hardline to F female adapter1000 cable, pin connector1000 cable, splice connector1000 cable, semiflex to F male adapter1000 cable, semiflex to F female adapter

565 cable, pin connector565 cable, splice connector565 cable, feedthru connector565 cable, hardline to F male adapter565 cable, hardline to F female adapter700 cable, pin connector700 cable, splice connector700 cable, hardline to F male adapter700 cable, hardline to F female adapter840 cable, pin connector840 cable, splice connector840 cable, hardline to F male adapter840 cable, hardline to F female adapter1160 cable, pin connector1160 cable, splice connector1160 cable, semiflex to F male adapter1160 cable, semiflex to F female adapter

458465784578457845784578

46578457845784578

Hardline/Semiflex Connectors for TFC TX Flexible Feeder CablesACC-15CHT10UACC-15SPT10UACC-15AFMT10UACC-15BAFFT10U

Flexible Feeder cable, pin connectorFlexible Feeder cable, splice connectorFlexible Feeder cable, hardline/semiflex to F male adapterFlexible Feeder cable, hardline/semiflex to F female adapter

4578

23





Part Number Index


Hardline/Semiflex Connectors/Adapters for CommScope QR CablesACC-540CHQRACC-540BQRACC-540SPQRACC-540AFMQRACC-540BAFFQRACC-715CHQRACC-715SPQRACC-715AFMQRACC-715BAFFQRACC-860CHQRACC-860SPQRACC-860AFMQRACC-860BAFFQRACC-1125CHQRACC-1125SPQRACC-1125AFMQRACC-1125BAFFQR

Hardline/Semiflex Connectors/Adapters for Trilogy MC2ACC-440CHMCACC-440SPMCACC-500CHMCACC-500SPMCACC-500AFMMCACC-500BAFFMCACC-650CHMCACC-650SPMCACC-650AFMMCACC-650BAFFMCACC-750CHMCACC-750SPMCACC-750AFMMCACC-750BAFFMCACC-1000CHMCACC-1000SPMC

PAGENO.

540 cable, pin connector540 cable, splice connector540 cable, feedthru connector540 cable, hardline to F male adapter540 cable, hardline to F female adapter715 cable, pin connector715 cable, splice connector715 cable, hardline to F male adapter715 cable, hardline to F female adapter860 cable, pin connector860 cable, splice connector860 cable, hardline to F male adapter860 cable, hardline to F female adapter1125 cable, pin connector1125 cable, splice connector1125 cable, semiflex to F male adapter1125 cable, semiflex to F female adapter

440 cable, pin connector440 cable, feedthru connector500 cable, pin connector500 cable, feedthru connector500 cable, hardline to F male adapter500 cable, hardline to F female adapter650 cable, pin connector650 cable, splice connector650 cable, hardline to F male adapter650 cable, hardline to F female adapter750 cable, pin connector750 cable, splice connector750 cable, hardline to F male adapter750 cable, hardline to F female adapter1000 cable, pin connector1000 cable, splice connector

46578457845784578

4545784578457845

Hardline/Semiflex Connectors/Adapters for CommScope P1 CableACC-412CHP1ACC-412SPP1ACC-500CHP1ACC-500SPP1ACC-750CHP1ACC-750SPP1

412 cable, pin connector412 cable, splice connector500 cable, pin connector500 cable, splice connector750 cable, pin connector750 cable, splice connector

454545

24





Part Number Index


MiscellaneousACC-HSGHSGFACC-90ACC-9015EXTACC-9030EXTACC-9045EXTACC-9060EXTACC-SW90ACC-SW9015EXTACC-SW9030EXTACC-18015EXTACC-18030EXTACC-18045EXTACC-18060EXTACC-15EXTACC-30EXTACC-45EXTACC-60EXTACC-90EXTACC-120EXTACC-PSB-01ACC-PSB-SACC-TRM-01ACC-F-625-CHACC-F-625-CH-DCBACC-AFMACC-BAFF

PAGENO.

Female adapter for 5/8” pin connector to 5/8” pin connector90 deg adapter90 deg adapter & 1.5” extension90 deg adapter & 3” extension90 deg adapter & 4.5” extension90 deg adapter & 6” extensionSwivel 90 degree adapterSwivel 90 degree adapter with 1.5” extensionSwivel 90 degree adapter with 3” extension180 deg adapter & 1.5” extension180 deg adapter & 3” extension180 deg adapter & 4.5” extension180 deg adapter & 6” extensionStraight 1.5” extensionStraight 3” extensionStraight 4.5” extensionStraight 6” extensionStraight 9” extensionStraight 12” extensionPedestal splice blockPedestal splice block siezurelessTerminatorF female to 5/8” pin adapter for 5/8” female housingF female to 5/8” pin adapter with DC block for 5/8” female housingF male to 5/8” female adapter for 5/8” pin connectorF female to 5/8” female adapter for 5/8” pin connector

111010101010101010 9 9 9 9 9 9 9 9 9 911111112121212

25




The Company

Amphenol Corporation is one of the largest manufacturersof interconnect products in the world. The company designs,manufactures and markets RF/microwave connectors; flatribbon cable and interconnect systems; CATV cable andconnectors; electronic connectors; and fiber-optic manage-ment equipment. The primary end markets for Amphenolproducts are communications and information processing,including cable television, cellular telephone, data commu-nications and instrumentation; aerospace and military ; au-tomotive, rail and transportation; and industrial applications.

Amphenol Corporation is a world leader in providing inte-grated interconnect solutions to the telecommunications in-dustry. Recognized worldwide as a technology leader in thewireless market, Amphenol offers a full complement of RFcoaxial products from Mini-UHF connectors used on cellu-lar subscriber units to low intermodulation 7-16 DIN con-nectors used on cellular base stations. Today, Amphenol isa major player in this global arena; a position founded onthe combined strengths of a broad product line and a lead-ership role in product innovation.

As the information super highway expands, the demand forinterconnect solutions continues to grow into new and excit-ing areas. Amphenol is a leading producer of broadbandcoaxial cable, connectors and fiber optic interconnect com-ponents. Amphenol is uniquely capable of supplying thecomplete Hybrid Fiber/Coaxial (HFC) interconnect systemswhich form the backbone of the information super highway.As a result, every household, business, private and govern-ment institution is a potential customer and will depend onAmphenol’s commitment to quality and product innovation.

In the area of computers and electronic data interchange,Amphenol continues to concentrate on the fastest growingsegments; such as cable assemblies and line terminatorswhich bring reliable miniaturized solutions to LANS and otherinteractive communications networks, to high density con-nectors utilized in next generation global telecommunica-tions switching systems.Amphenol’s ability to provide fully integrated solutions evenextends into the arena of smart card technology, where mi-crochips and sophisticated chip card acceptor devices arebeing combined for a growing number of applications frombanking, to security, to medicine, to voice recognition sys-tems.

Maintaining this position as a leader in the field of communi-cations requires close interaction with a worldwide customerbase through international management teams, distributedmanufacturing, global quality assurance programs and so-phisticated distribution networks. By remaining totally com-mitted to the customer, Amphenol provides the very highestlevels of quality and responsive service around the world.

TFC Division

Times Fiber Communications, Inc (TFC) is one of the world’slargest manufacturers of broadband coaxial cable with ex-perience extending over half a century. Our complete rangeof CATV products are used in the cable television, satellite,data networking, automotive, and distributed power indus-tries. These include the world class T10 and TX low-losssemiflex trunk and distribution cables and T10 service entrydrop cables. TFC/Amphenol is pleased to offer a full line ofsemiflex cable connectors to meet the demanding require-ments of HFC broadband infrastructures of CATV MultipleSystem Operators and telephone companies worldwide.

Commitment to Customer Service

For over 50 years, leading manufacturers of communica-tions, consumer, industrial and aerospace products haverelied on TFC/Amphenol to provide total interconnect solu-tions. Maintaining this high level of customer trust requiresa total concern for complete customer satisfaction at all lev-els - from engineering, to manufacturing, to quality assur-ance. Since many products are custom designed to indi-vidual customer specifications, often for the harshest envi-ronments, it is critical that a teamwork approach be takeninvolving the customer at all levels. It starts with the productand applications engineers who listen closely to customerneeds, combining solid analytic skills with the latest CAEand CAD tools to quickly and cost effectively solve prob-lems.

TFC/Amphenol also employs multifunctional teams to en-sure that all products are designed for manufacturability.Serving the needs of our customers also requires a strongworldwide manufacturing presence. That’s why we operateadvanced production and assembly facilities strategicallylocated across three continents. Yet, our quality remains ex-ceptionally uniform and internationally standardized, fromraw materials testing, through design engineering, to auto-mated manufacturing and subassembly, to fully documentedand traceable test procedures developed in accordance withcustomer specifications. TFC/Amphenol also employs Sta-tistical Process Control and has obtained ISO 9000 Certifi-cation for all its production facilities worldwide. As a result,we offer precisely what every customer is looking for - worldclass quality at the lowest possible cost.



Amphenol Information

TFC/Amphenol Locations

TFC/Amphenol®

358 Hall AvenueWallingford, Connecticut 06492

Tel: (203) 265-8500 Fax: (203) 265-8422timesfiber.com

TFC/Amphenol offers a full line of broadband equipment including:

T10 Semiflex Coaxial CableTX Low Loss Semiflex Coaxial Cable

T10 Drop CablesAutomotive Coaxial Cables

Direct Broadcast Satellite Coaxial CablesFiber Optic Management Equipment

TFC/Amphenol North America TFC/Amphenol Latin America TFC/Amphenol Asia

Wallingford, Connecticut 06492358 Hall Avenue

Tel: 203-265-8500Fax: 203-265-8422

Chatham, Virginia 24531380 Tightsqueeze Industrial Road

Tel: 434-432-8554Fax: 434-432-1836

Renfrew, Ontario, Canada K7V 3Z2580 O’Brien Road

Tel: 613-432-8554Fax: 613-432-6888

Liberty, North Carolina 272987279 Liberty Park

Tel: 336-622-8104Fax: 336-622-8104

Corrientes, Argentina W3400CFLSan Lorenzo 888 - Suite 1H

Tel: 011-54-3783-42-9300Fax: 011-54-3783-42-2774

Nogales, Arizona 85621180 N. Freeport Drive W-10

Tel: 520-397-7026Fax: 520-397-7087

Campinas, Sao Paulo, BrazilKm. 121,5 (SP340) CEP 13088-061

Tel: 011-55-19-3757-1166Fax: 011-55-19-3257-1255

Chung Nam-Do, 339-860 South Korea167-4 Nae Pan-Ri, Dong-Meon

Tel: 011-82-41-864-0858Fax: 011-82-41-864-0436

Revision AHG 1202, 3500


(click on link(s) below to jump to page) - wordpress.com · tfc/amphenol’s superior connector...

Documents