cleaning, filtering, testing - krumm-tec · fpg 1000 • 2 channels • cleaning pressure 2–4 bar...
TRANSCRIPT
www.krumm-tec.com
Krumm-tec Cleaning Solutionsfor industrial applicationsCleaning, Filtering, Testing
CuStomizedCleaning SolutionSCleaning solutions for industrial applicationsFor prototypes, cooling channels or even lab rooms –Krumm-tec specializes in various cleaning processes
• Electronic components• Prototypes (FDM, PolyJet, SLA,...)• Plastics• Air filters• Metal• and many more
Possible materials:4
1 3
2
Cleaning medium Cleaning proCeSSeS
part WorK SpaCe
smallmini
≤20×20×20mm
medium
≤2000×2000×2000mm≤500×500×500mm
big
≥5000×5000×5000mm
LiquiD
PurgE· · ·
· · ·
· · ·
·· ·
DEDuSt uLtrASonic
DEgrEASE ExtrAction cAuStic SoDA
BLASt coMPrESSED Air StEAM
HigH PrESSurEicE BLASting DiSinFEctSoLiD gASEouS
• Manual or automatic operation• Feed via loader, crane or assembly line
5 operation and Feed
air filters
Cleaning systems
Form testers
Cleaning SyStemSCleaning and surface treatment –with fluid, solid or gaseous media
Cleaning cabins –if required explosionproof.
Depending on the type and degree of soiling, we offer a variety of cleaning media and processes: water-ba-sed cleanser, alcohols, granules or dry ice – ultra so-nic, high pressure, compressed air and many more. All Krumm-tec systems are available as explosionproof models.
Krumm-tec has been working with leading companies in the 3D-print, automotive and aerospace industries for the past years.
CleanMatic Series
✔ For aqueous solutions and solvents• 30–80° degrees• Blasting, oscillation, rotation and ultra sonic
DIMENSIONS
700×450×550 to 1900×1650×2400 mm
part SIzE
280×335×280 to 1050×920×640 mm
Clean Matic 2150 Clean Matic 4150 premium Clean Matic 6150Clean Matic 4150 Clean Matic 8150
cleanLineMODULAR cLeAning systeM• Exhaust air fan system• targeted airflows• Explosionproof• rinsing and basin systems• Ultra sonic bath systems
Dimensions and part size
Customized
air Filter SyStemS
mechanical air filters lrF
Our mechanical air filter systems can be used to extract and filter: fine dust particles, vapors and gases of cleaning solvents, emulsion mist, welding fumes and many more.
Extraction and filtration ofemulsions and fine dust particles
electrostaticair filters lrF/e
Our electrostatic air filter systems can be used to separate aerosols out of media with an oil content of minimum 9% of non-flam-mable crude gas. Extraction and filtration of oil, emulsion and minimal lubrication mist.
Extraction and filtrationof oil mists
LrF 0K6
LrF 1K0LrF 1K5
LrF 4K0LrF 3K0
LrF 2K0
SiLEnt oPErAtion
rE-circuLAtion
FinE FiLtrAtion
extraction and filtration of fine dust particles
coSt-EFFEctivE
ExtrAction oF MAcHinES
circuLAtion SyStEM
LrF/E 0K750
LrF/E 2K0LrF/E 3K0LrF/E 5K0
LrF/E 1K5/DLrF/E 1K5
mould teSting unitS
Form testers are used to clean and rinse injection moulds, as well as measure pressure and flow – all this up to six cooling channels simultaneously. For the different requirements, our form testers can be heated or cooled. the testers are equipped with a hydraulic control system to open and close the core pulls and various digital documentation and evalutation devices, such as a SD card or a notebook.
• 1 channel
• Cleaning pressure 2–4 bar
• Volume flow 18 l/min
• tank capacity 30 l
Fpg 1000
• 2 channels
• Cleaning pressure 2–4 bar
• Volume flow 18 l/min
• tank capacity 60 l
Fpg 2000
• 4 channels
• Cleaning pressure 2–4 bar
• Volume flow 18 l/min
• tank capacity 80 l
Fpg 3000
• 6 channels
• Cleaning pressure 2–4 bar
• Volume flow 18 l/min
• tank capacity 100 l
Fpg 4000
cLEAning HyDrAuLicS
PH-vALuE DocuMEntAtionFLow rAtE notEBook
Clean, filter and rinsecooling channels
For opening and closing the core pulls
Monitoring the pH-value Documenting the flow rates on various data carriers
Flow rate measurement Documenting the flow rate
Heating and coolingof the medium
Leakage control
tEMPErAturE PrESSing
Cleaning of injection moulds
cleaning technologies
Krumm-tecIndustrial cleaning solutions and air filter systemsUnter Gereuth 6–8D–79353 Bahlingen
tel +49 (0) 7663 91497 0Fax +49 (0) 7663 91497 [email protected]
cleaning systems
Mould testing units
cLeAning AnDsURfAce tReAtMent
cLeAning OfinjectiOn MOULDs
Air filter systems
fiLtRAtiOn AnD extRActiOn Of DUst PARticLes
• Cleaning of cooling channels• Up to 6 channels simultaneously• pressure and flow metering• Leakage checking• Digital evaluation
• Manual or automatic cleaning• Suitable for plastics, metal, filters etc.• Equipped with crane, rotary plate or basin• Variety of media and processes• Explosionproof if required
• Filtration of particles• Filtration of oil mists• re-circulation possible• Self-cleaning effect
Last updated: 25.07.17