clc block making machines quotation
TRANSCRIPT
Page 1 of 5
NANO FOAM TECHNOLOGY PRIVATE LIMITED MFG. OF FOAM CONCRETE PLANT & EQUIPMENT ADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008, TAMIL NADU, INDIA
MOBILE: 9944685411 EMAIL: [email protected]
http://www.clcmachine.net/
Dear
We are enclosing our initial proposal on a manual plant as well as an Automatic plant for
the manufacture of CLC Light Weight Blocks Machine. These plants have been set up by
us all over India and overseas.
Nano Foam Technology Private Limited has worked with leading Construction
manufacturers all over the world. We employ highly experienced technologists who have
hands on plant experience for manufacturing Cellular Light Weight Concrete (CLC) Blocks
Machine based on International Standards. Our dedicated team of engineers works
closely with our customers to ensure that the entire process of setting up the plant is
made simple. We offer complete plants along with the know how to Manufacture CLC
Machine. Apart from training we also provide technical and commercial support for a
period of 12 months from date of commissioning the plant.
Kindly go through our proposal and let me know if you would be interested in taking this
to the next level of discussion.
With best regards, we remain.
For Nano Foam Technology Pvt Ltd
Ms.Indhu
Page 2 of 5
NANO FOAM TECHNOLOGY PRIVATE LIMITED MFG. OF FOAM CONCRETE PLANT & EQUIPMENT ADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008, TAMIL NADU, INDIA
MOBILE: 9944685411 EMAIL: [email protected]
http://www.clcmachine.net/
1. MIXER: Specially designed mixer suitable for mixing CLC block slurry in short
intervals to ensure efficient impregnation and distribution of foam along the mix.
Blocks produced on Nano Foam Technology Private Limited mixers meets
CONSTRUCTION: The mixer is manufactured from Carbon Steel and fitted with
wear resistant mixing tools which are of replaceable design. The shafts are installed
in bearing housings provided with heavy duty roller bearings complete with seals,
bearing cups and gland packings. The mixer is mounted on a platform which has a
bottom clearance of 1mtr from floor level.
2. FOAM GENERATOR: Patented design foam generator an In built control panel for
operation. The unit is complete with solenoid valves, timer and hoses.
WORKING PRINCIPAL: Our foam processor has a timer fitted. Once the button is
pressed for the foam, the solenoid valves for air and emulsion (foaming agent and
water) open up, producing foam during the period set on the timer.
3. AIR COMPRESSOR : Air compressor with a tank capacity of 180 Lts runs on 3 phase
power will be connected to the
FINISH: All steel parts are surface treated and coated with zinc rich primer and 2 coats
of paint. All machine and rotating parts are well oiled and lubricated and coated with
antirust coating where applicable.
DELIVERY: 20 days from date of receiving confirmed order with 40% advance.
Page 3 of 5
NANO FOAM TECHNOLOGY PRIVATE LIMITED MFG. OF FOAM CONCRETE PLANT & EQUIPMENT ADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008, TAMIL NADU, INDIA
MOBILE: 9944685411 EMAIL: [email protected]
http://www.clcmachine.net/
SL.NO
PRODUTS
SPECIFICATIONS
PICTURE
QTY RATE PER TOTAL AMOUNT
1. CLC mixer
0.5
Capacity:0.5 m3
Power: 5 HP
Make: Crompton or Havells reversed forward motion for
blades made of hard blades
01
1,70,000.00
1,70,000.00
2 Foam
Generator
0.5 HP motor
Capacity: 600 litres
foam output per
minute
01
55,000.00
55,000.00
3 Control
panel
Fully automatic
power supply
01 38,000.00 38,000.00
4 Air
Compresso
r
3 HP 180 litre tank
capacity single phase
power supply
01 32,000.00 32,000.00
Page 4 of 5
5 Foaming
agent
Synthetic base
50
ltr
120.00 6,000.00
6 Trolley Which is used to
carry foam
concrete from
mixer machine to
mould
01 22,000.00 22,000.00
TOTAL 3,23,000.00
OPTIONALS ON REQUEST
Clc mould
S.NO PRODUCT SPECIFICATIONS RATE
PER
1 600*200*200 We can make 10 blocks
in one mould
9,000.00
2 600*200*150 We can make 10 blocks
in one mould
9,500.00
3 600*200*100 We can make 10 blocks
in one mould
10,000.00
MOULDS: Master moulds suitable for producing blocks of STD deigns of 600x200x100
or 600x200x150 or 600x200x200
RUNNING PLANT VISIT :
We will arrange a visit to a running plant in one of our client Factories at Trichy. Running
plant will be manual.
Rs.10,000 / Person / Visit
Page 5 of 5
NANO FOAM TECHNOLOGY PRIVATE LIMITED MFG. OF FOAM CONCRETE PLANT & EQUIPMENT ADMIN & SALES OFF: 10/23, CHRISTIAN STREET,
K.G. CHAVADY, COIMBATORE – 641 008, TAMIL NADU, INDIA
MOBILE: 9944685411 EMAIL: [email protected]
http://www.clcmachine.net/
ON SITE TRAINING :
We will arrange an on-site training to a running plant in one of our client Factories at
Trichy.
Rs.10,000 per visit (without Food / Stay Expenses) (Pickup / Drop from city will
be arranged)
PAYMENT:
40% ADVANCE AND BALANCE AGAINST PROFORMA INVOICE.
TAXES:
VAT AS APPLICABLE AT ACTUALS
14.5% For sale within Tamil nadu
2% Against C- Form ( 12.5% to be deposited as security deposit and will be released
after submission of C Form )
VALIDITY OF OFFER:
30 DAYS.
ERRECTION/COMMISIONING:
ERRECTION / COMMISIONING WILL BE FREE. ALL TRAVEL, LODGING, BOARDING AND
OUT OF POCKET EXPENSES IN CLIENTS SCOPE.
WARANTY:
12 MONTHS FORM DATE OF DISPATCH AGAINST MANUFACTURING DEFECTS
SPARE PARTS:
AVAILABLE ON REQUEST.
FREIGHT/FORWARDING:
ON DOOR DELIVERY BASIS AT CLIENTS COST
FOR NANO FOAM TECHNOLOGY PVT LTD
Ms.Indhu