classic c2000 collection -...
TRANSCRIPT
C2000®
Classic Collection
Smooth CurvesThe finest quality
The first thing you’ll notice about the C2000 Classic series is the cover
comes in a choice of superb metal finishes and classic coloured
plastic mouldings.
This cover not only looks attractive, it also hides all mounting holes, and
is easily removed to enable you to paint right up to the edge of the grid
plate without having to worry about marking the cover. When decorating
is complete, the cover is simply replaced for a perfect finish.
C2000 Classic series covers and grid plates can be mixed and matched
to produce a combination that matches the particular décor theme you
want to create.
In fact even after the C2000 Classic series has been installed, you can
change combinations as your décor changes.
Switches
A wide choice of C2000 Classic series switches are available for homes
and commercial premises, including one to six button standard wall
switches and one to four button architrave switches.
Sockets
With so much electrical equipment in our homes and offices, it’s good
to know that the C2000 Classic series has all your requirements covered with
a comprehensive range of sockets.
10A and 15A single and twin switched sockets in horizontal and vertical
configurations provide a number of options including neons and safety
shutters in single or double pole.
2
Data and Communication
Telephones, fax machines and the Internet are an everyday part of life,
not just in the office, but in the home too.
Having a home entertainment system has usually meant putting up with
metres of messy audio cables, but not anymore. The C2000 Classic
series includes wallplates that provide a neat connection point for the
audio cables of televisions, VCRs and sound systems via easily identified
red, yellow, white, orange or black RCA sockets.
Specialised Switches
A 45A cooking appliance isolating switch is also available in the C2000
Classic series. Installed a safe distance from electric hotplates, it enables
power to the hotplates to be completely shut off in the event of an
emergency such as oil catching fire.
Access, Card, Dimmers, Fanspeed and Key Tag switches are also
included in the range.
Specialised Switch Sockets
For added peace of mind, twin switched sockets are available with
built-in RCD protection, in both 30 and10mA.
Four gang switched sockets make life even easier in the home and office –
you’ll soon wonder how you ever managed without them.
A universal shaver outlet has also been included in the C2000 Classic
series for locations such as hotels, conference centres and airports.
All specialised switch sockets are available in horizontal only.
Painting Shields
Snap on painting shields for grid plates are also available (C2000PP).
These paint shields provide total protection of the grid plate when
painting with a brush, roller or spray-gun.
3
The C2000 Classic series consists of seven superb metal cover finishes. All simply clip onto the grid plates while the stainless steel and brass covers are also available in screw fixed formats for greater security in commercial areas.
Metal Finishes
Gold (GD)
Brushed Brass (BB)
Brushed Aluminium (BA)
Chrome (CH)
Gunmetal (GM)
Brass (BS)
Stainless Steel (SS)
Moulded Plastic Finishes
White Electric (WE)
Black (BK)
The Attraction of Metal
4
Brushed Brass (BB)
Chrome (CH)
Brass (BS)
Brushed Aluminium (BA)
Gun Metal (GM)
Stainless Steel (SS)
Gold (GD)
5
40/45A current carrying capacity
Cooker Switches
The C2000 series cooker switches feature a rocker style switch mechanism, with the single pole version boasting a 45A load rating.
If a cooktop and oven are needed in the same area, a single switch can
be used to protect them both. In addition to the single pole (45A 250V),
a double pole (40A 500V) for multiple phase applications is also available.
Both have the option of a neon indicator.
The new rocker style switch mechanism gives the cooker switch a much
more stylish appearance and ensures that it blends well with other C2000
series switches. It also has generously sized terminals that will easily
accept 3x6mm2 or 1x16mm2 cables.
The perfect companion for C2000 series cooker switches are the socket
and plug/lead products (31VCS and 800CL). Together they allow cooking
equipment to be installed just before the new owners arrive, to prevent
damage or theft while building and decorating are still in the progress.
800CL 31VCSNB: 31VCS available in Standard or 2000 Series (2031VCS) only
6
Schneider Electric is the first company in Australasia to offer practical four switched power sockets in great new metal look finishes. Our famous C2000 series ‘awesome foursome’ switched sockets now come in arctic silver and chrome shadow finishes which blend in seamlessly with modern or architectural settings.
Cool colours and features include:
Fingerprint, chemical, UV and corrosion resistant >
Arctic silver compliments the C2000 or Slimline SC2000 series >
‘Brushed Aluminium’ colour variant
Chrome shadow compliments existing Slimline SC2000 series >
‘chrome shadow’ colour variant
Double pole 10A, 250V a.c. (suitable for caravans and marine craft) >
Quad Sockets with Style
7
IP66 C2000 Classic SwitchesThe outstanding features and stylish good looks of the IP66 C2000 Classic switches make them the ideal choice for domestic, wet area installations.
A simple solution to the longstanding problem of using electricity near
water, the IP66 C2000 Classic switches are designed specifically for the
restricted zones of kitchens, bathrooms, laundries and other wet areas
where both safety and aesthetics are important.
Their hardwearing, UV stabilised, polycarbonate surface also makes
them suitable for a wide variety of outdoor areas, such as carports
and pergolas.
Ensured safety in wet areas.
There are four options in the C2000 Classic weatherproof range –
single through to 4 button switch.*
A unique waterproof membrane between the switch dolly and mechanism,
together with a low profile neoprene gasket ensures a consistent IP66 rating
when installed on a suitable surface.
These barriers guarantee safety when the switches are used with wet
hands or installed near sinks, basins, taps and shower areas.
*Three and four gang options available mid 2009
8
Double Pole for Safety and PerformanceSchneider Electric’s highly popular C2000 Classic series of switches and sockets are now available in a double pole range. Ideal for use in caravans, marine craft, motor homes, transportable buildings or anywhere installation safety is paramount. The double pole range is a great addition to the accessory offering.
Features and Benefits
Added safety >
Interchangeable covers – mix and match combinations to create your >
own theme
Neon options available (eg. C2025DN) >
Shutter options (eg. C2025DS) >
10A and 15A versions >
Standard metal decorative covers available (refer page 5) >
9
Disconnected
Connected
The Fastest Fit-Off in the World
Forget the slow process of stripping, twisting and screwing down conductors, Quick Connect cuts installation time in half. It’s ideal for volume users, as it saves time and greatly reduces human error, so call-backs and reconnections are almost eliminated.
Insert approximately 23mm of unstripped cable and click terminations >
down, it’s that easy!
Clear indication of correct termination is given >
Colour-coded sliders allow for easy identification of polarity >
Suits 1.5mm² and 2.5mm² cable >
Compatible with all C2000 Classic series accessories >
One conductor per terminal. Up to 4 active, Neutral and Earth per unit >
Complies with all relevant requirements of AS/NZS/3112 and >
AS/NZS/60998.2
250V ~ 10A rating >
Quick Connect
10
Lock-Jaw Cable Retention and ConnectionWhen Quick Connect’s slider mechanism is moved to the locked position it clamps the cable firmly. The contact connection is held firmly under high pressure due to the 45° angled contact tags, this guarantees cable retention in the toughest environments.
Cable Retention Cable Connection
Installation Cross Section1. Insertion of cables and positioning screwdriver
2. Levering slider to CONNECT and retain cables
3. Levering slider to LOCK and retain cable (slider cut away to show cable)
1 2 3
11
Personalised PlatesC2000 Classic series products are available with labelling windows so that switches and circuits can be instantly identified.
The clear window simply clips into the grid and the label is inserted.
A specially pierced cover is then clipped on to give you an
easy-to-read label.
These products are available fully assembled or as an ID cover kit
comprising the relevant pierced cover, the necessary transparent
windows, and some commonly used labels.
Simply add ‘I’ to the standard catalogue number.
1. Attach window
2. Insert label
3. Fit cover
4. Finished product
12
Custom Label Software ProgramThe labels supplied with the ID cover kit have been chosen to suit a number of everyday applications. However, circuit identification for major projects can be far more complex, often requiring hundreds of labels in many sequences.
Available free from www.clipsal.co.nz, the
C2000 label printer is a Windows™ based
custom software package that uses a very
simple data entry form and allows for multiples
of each label and multiples of consecutive
labels. Text colour selection is also available,
depending on the suitability of the printer.
The program includes a test page and setting
adjustment facility which allows for different
brands of printers.
The C2000 label printer ensures perfect labels
every time when printing on C2000 label sheets.
These sheets are available in packs containing
10 pages with over 400 labels per page. For
further flexibility, there is a choice of both
adhesive or non-adhesive versions.
While the C2000 label printer was designed for
the C2000 Classic series labelling system, it can
also be used for 30PID labels and the Slimline
SC2000 range.
13
> Push Button Mechanism
Push Button switching is not only the latest innovation in switch
operation, but also an easy to install retrofit solution.
The 30 series (30PB) push button mechanism will easily fit into all
standard C2000 Classic series wall plates.
The 30PB push button offers a new low profile look and feel and
provides a smooth and reliable action in preference to the standard
rocker switch.
The 30PB has a 20A/16AX capacity, comes with or without LED
indication and fits all 30 series apertures. (22mm holes)
> Rocker Switch Mechanism
The gentle curves and overall shape of the 30 series rocker switch
mechanism is equally proportioned to provide uncomplicated
symmetry.
It is this flexibility and strength of design that has enabled this switch
shape to remain in style since the 1960’s.
The 30 series can easily be converted from vertical to horizontal mounting
by removing the mechanism and turning it through 90°. Most switch
bases fit a 22mm diameter hole and have terminal bores of 4.1mm unless
specified otherwise.
Schneider Electric offers a broad range of labelled 30 series mechanisms
for easy identification when several switches are installed on the same
switchplate or when there is a chance of confusion over the load
controlled.
Specialised mechanisms are available; such as the 30RSM3, a 1, 2, 3,
Off rotary mechanism, or the 30TKM which has a removable key that allows
you to lock the mechanism On or Off.
30 Series Mechanisms
30M
30PB
30MI
30PBL
30RSM3
30TKM
30MBPR
14
A C-Thru™ Dimmer lets you adjust the lighting levels in any area, for any occasion.
For instance, you may want to add a little romance to an intimate dinner,
create the right mood for a movie, or leave just enough light to navigate
your way to the bathroom.
In commercial environments too, light dimmers have an almost endless
number of applications. Auditoriums, restaurants and boardrooms are just
a few of the possible locations in which a dimmer will offer you full control
of lighting to suit any occasion.
C-Thru™; The clear choice – helping you select the right dimmer, first time,
every time!
Feature
32e450LMLeading edge
diMMers
32e450tMtraiLing edge
diMMers
32e500FMFan speed
controLLer
32e450udMuniversaLdiMMers
Power Rating 450VA 450VA 500VA 450VA
Load Type Compatibility Medium Medium Medium HIGH
Resistive
Inductive
Capacitive
Small Motors
Short Circuit Protection
Derating Factor for Multigang Applications
25% (per additional
mech per plate)
25% (per additional
mech per plate)
25% (per additional
mech per plate)
25% (per additional
mech per plate)
Soft Start Feature
Voltage Stability
Frequency Stability
Immunity to Ripple Signal Injection
Over-current Compensation
Over-temperature Compensation
Thermal Shutdown
“Safe” in all modes operation
Dimmer product feature comparison chart
The Choice is Clear and Simple
15
*Available mid 2009
Switches – C2000 Classic Series
paint protectors
C2000 Classic series paint protectors C2000PP
FLusH switcHes
Switch 1 gang 250V 16A C2031VA16T
Switch 2 gang 250V 16A C2032VA16
Switch 3 gang 250V 16A C2033VA16
switcH grid pLates and covers
Grid and cover assembly blank C2031VX
Grid and cover assembly 1 gang less mech C2031VH
Grid and cover assembly 2 gang less mech C2032VH
Grid and cover assembly 3 gang less mech C2033VH
Grid and cover assembly 4 gang less mech C2034VH
Grid and cover assembly 5 gang less mech C2035VH
Grid and cover assembly 6 gang less mech C2036VH
switcH grid pLates and covers witH identiFication Kits
Grid and cover assembly 1 gang less mech - vertical mount C2031VHI
Grid and cover assembly 2 gang less mech - vertical mount C2032VHI
Grid and cover assembly 3 gang less mech - vertical mount C2033VHI
Grid and cover assembly 4 gang less mech - vertical mount C2034VHI
Grid and cover assembly 5 gang less mech - vertical mount C2035VHI
Grid and cover assembly 6 gang less mech - vertical mount C2036VHI
FLusH switcH covers
Switch cover blank C2031VXC
Switch cover 1 gang C2031C
Switch cover 2 gang C2032C
Switch cover 3 gang C2033C
Switch cover 4 gang C2034C
Switch cover 5 gang C2035C
Switch cover 6 gang C2036C
arcHitrave size – verticaL Mount
Switch 1 gang 250V 10A C2030
Switch 2 gang 250V 10A C2032A
Switch 3 gang 250V 10A C2033A
Switch 4 gang 250V 10A C2034A
arcHitrave switcH grid pLates & covers
Grid and cover assembly 1 gang less mech C2031
Grid and cover assembly 2 gang less mech C2032
Grid and cover assembly 3 gang less mech C2033
Grid and cover assembly 4 gang less mech C2034
arcHitrave FLusH switcH covers
Switch cover 1 gang C2001C
Switch cover 2 gang C2002C
Switch cover 3 gang C2003C
Switch cover 4 gang C2004C
eLectric range switcHes
250V 45A single pole C2031/45
250V 45A single pole with neon C2031/45N
500V 40A double pole C2031D40
250V 45A double pole with neon C2031D40N
eLectric range switcH cover
Cooker switch cover suit 40 & 45A ranges C2031/45C
perManent connection unit
10A permanent connection unit C2032VTB
teLepHone connection outLet pLate and cover
1 Gang telephone outlet – 2 wire (telepermitted) C2031VT2W
2 Gang telephone outlet – 2 wire (telepermitted) C2032VT2W
teLepHone connection outLet cover
1 Gang telephone outlet – 2 wire cover only C2031VT2WC
2 Gang telephone outlet – 2 wire cover only C2032VT2WC
tv antenna connection accessories
TV antenna socket plate and cover 75 Ohm C2031VTV75
access card operated switcHes
250V 10A switch to suit 1 x 16A circuit C2033CC1
FLusH switcHes, ip66 rated
Switch 1 gang 250V 10A – vertical mount C2031V66
Switch 2 gang 250V 10A - vertical mount C2032V66
Switch 3 gang 250V 10A - vertical mount C2033V66*
Switch 4 gang 250V 10A - vertical mount C2034V66*
16
FLusH switcH verticaL Mount
Image cat no. LengtH WIDtH DePtH moUntIng centReS
c2031Va16t
c2031Va16t
116mm 76mm 30mm 84mm
c2032Va16
c2033Va16
c2031V66
c2032V66
c2033V66
c2034V66
c2032VtB
c2031Vt2W
c2032Vt2W
c2031VtV75
switcH grid pLates and covers
c2033VH
c2031VX
116mm 76mm 13mm 84mm
c2031VH*
c2032VH*
c2033VH*
c2034VH*
c2035VH*
c2036VH*
switcH grid pLates and covers witH identiFication Kits
c2031VHI*
c2031VHI*
116mm 76mm 13mm 84mm
c2032VHI*
c2033VHI*
c2034VHI*
c2035VHI*
c2036VHI*
arcHitrave series
c2030
c203075mm 32mm
30mm55mm
c2031* 11mm
c2032a86mm 34mm
30mm70mm
c2032* 11mm
c2033a
141mm 35mm
30mm
122mmc2033* 11mm
c2034a 30mm
c2034* 11mm
range switcHes
c2031/45
c2031/45
116mm 76mm 30mm 84mmc2031/45n
c2031D40
c2031D40n
access card switcHes
c2033cc1
c2033cc1
116mm 76mm 36mm 84mm
c2033cc1n
c2033cc1X
c2033cc1nX
c2033cc2
c2033cc2X
*sold less mechanisms
17
Socket outlets – C2000 Classic Series
singLe – verticaL Mount
Power outlet single 250V 10A – safety shutter C2015V
Power outlet single 250V 15A C2015V15
Power outlet single 250V 10A with shutters and extra removable switch C2015VXA
singLe - HorizontaL Mount
Power outlet single 250V 10A C2015
Power outlet single 250V 10A – suit lighting C2015L
Power outlet single 250V 10A with shutter C2015S
Power outlet single 250V 15A C2015/15
Power outlet single 250V 20A C2015/20
Power outlet single 250V 10A with extra switch C2015X
Power outlet single 250V 10A with shutters and extra switch C2015XS
Power outlet single 250V 10A with two extra switches C2015XX
twin – verticaL Mount
Power outlet double 250V 10A with safety shutters C2025V
Power outlet double 250V 10A with extra switch with shutters C2025VXA
Power outlet double 250V 15A with shutters C2025V15
Power outlet double 250V 10A with double base 2015/2VS*
twin – HorizontaL Mount
Power outlet double 250V 10A C2025
Power outlet double 250V 10A – suit lighting C2025L
Power outlet double 250V 10A with neons C2025N
Power outlet double 250V 10A with shutters C2025S
Power outlet double 250V 15A C2025/15
Power outlet double 250V 15A with shutters C2025/15S
Power outlet double 250V 10A – quick connect C2025QC
Power outlet double 250V 10A with extra switch C2025XA
Power outlet double 250V 10A with shutters and extra switch C2025XAS
twin arcHitrave
Power outlet double 250V 10A C2016/2
Power outlet double 250V 10A double pole C2016/2D
Four gang – doubLe poLe – HorizontaL Mount
Power outlet 4 gang 250V 10A C2015D4
cHroMe sHadow Four gang - doubLe poLe - HorizontaL Mount
Power outlet 4 gang 250V 10A C2015D4,3S
Power outlet 4 gang 250V 10A with neons C2015D4N,3S
arctic siLver Four gang – doubLe poLe – HorizontaL Mount
Power outlet 4 gang 250V 10A C2015D4,3A
Power outlet 4 gang 250V 10A with neons C2015D4N,3A
socKet outLets, protected
overvoltage Surge Protection accessories
Power outlet double 250V 10A with surge protection C2025SF
residuaL current device protected accessories
Power outlet double 250V 10A with RCD – 30mA C2025RC
Power outlet double 250V 10A with RCD – 10mA C2025RC10
singLe – verticaL Mount covers
Cover power outlet single C2015VC2
Cover power outlet single with extra switch aperture C2015VXC2
singLe – HorizontaL Mount covers
Cover power outlet single C2015C
Cover for C2015/20 single switch socket C2015/20C
Cover power outlet single with extra switch aperture C2015XC
Cover power outlet single with extra 2 extra switch aperture C2015XXC
twin – verticaL Mount covers
Cover power outlet double (new cover) C2025VC2
cover power outLet doubLe witH extra switcH aperture
Cover power outlet double with extra switch (new cover) C2025VXC2
twin – HorizontaL Mount covers
Cover power outlet double C2025C
Cover power outlet double suit neon C2025NC
Quick connect cover C2025QCC
Cover power outlet double with extra switch aperture C2025XC
twin – sKirting Mount switcH covers
Cover power outlet double C2016/2C
Four gang – standard size covers
Cover power outlet 4 gang double pole C2015D4C
residuaL current device protected accessory cover
Cover to suit power outlet double with RCD protection C2025RCC
*Standard 2000 series plate design
18
switcH socKets verticaL Mount
Image cat no. LengtH WIDtH DePtH moUntIng centReS
c2015V
c2025V
c2025VXa
c2015V
116mm 76mm 28mm 84mm
c2015V15
c2015VXa
c2025V
c2025VXa
c2025V15
2025/2VS
switcH socKets HorizontaL Mount
c2015
c2025
c2015D4
c2015
76mm 116mm 28mm 84mm
c2015L
c2015S
c2015/15
c2015/20
c2015X
c2015XS
c2015XX
c2025
c2025L
c2025n
c2025S
c2025/15
c2025/15S
c2025Xa
c2025XaS
c2025SF 76mm 116mm 45mm 84mm
c2025Rc 76mm 116mm 47mm 84mm
c2025Rc10 76mm 116mm 47mm 84mm
c2025Qc 76mm 116mm 64mm 84mm
c2015D4 75mm 196mm 26mm 84mm
c2016/2 48mm 160mm 28mm 122mm
c2016/2D 48mm 160mm 28mm 122mm
19
pusH button MecHanisMs
Image cat no. DeScRIPtIon
30PB Push Button mech 20a / 16aX 250V Body fits 22mm hole
30PBL Push Button mech 20a / 16aX c/w LeD Body fits 22mm hole
switcH MecHanisMs
Image cat no. DeScRIPtIon
30m 250V/10a, 1 way/2 way – terminal bores of 4.1mm ø accommodate4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mRD 250V/10a, 1 way/2 way (with red dolly mark) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30RSm2 250V/15a, Rotary (2 on - 2 off) – also suitable for 12V d.c. 15a, and audio and control applications. Switch positions indicated in window. m rating is 50.
30RSm3 250V/15a, Rotary (3 on - 1 off) – also suitable for 12V d.c. 15a, and audio and control applications. Switch positions indicated in window. m rating is 50.
30mco 250V/10a, changeover, double throw (selects alternate circuits).
30mI 250V/10a, Intermediate – four terminals of 3.5mm ø accommodates 2 x 2.5mm² cables. Body fits 22mm ø hole.
30mBP 440V/15a, Bell press – offers facility for momentary on or oFF (one Looping terminal).
30mBPn 250V/15a, Illuminated bell press - offers facility for momentary on or oFF. neon is connected across terminals 1 & 4. alternative lamp voltages available.
30mD 250V/10a, 1 way, double pole, single throw – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.
30mD2 250V/10a, 2 Way, double pole, double throw – six terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. m rating is 75.
30mD15 250V/15a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.
30mD20 250V/20a, 1 way, double pole – 4 terminals of 1.5mm ø accommodate 3 x 2.5mm² cables. Body fits 34mm ø hole. m rating is 100.
30m16 250V/16a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.
30m20 250V/20a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.
30m35 250V/35a, 1 way/2 way – terminal bore of 3.6mm ø & Looping terminal bore of 3.9mm ø. m rating is 160. marked 35a.
30tKm 250V/20a (5a fluorescent load), 1 way/2 way, toggle key actuated – one Looping terminal. m rating is 100.
30m
30m15RD
30RSm2
30tKm
30 Series Switch Mechanisms
20
neon indicator MecHanisMs
Image cat no. DeScRIPtIon
30/2nm250V/10a, 2 way rocker with neon indicator – neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminal bores of 4.1mm ø. Body fits 34mm ø hole (note: neutral not required).
30n-ReD 250V – neon indicator (ReD)
30n-coLoUR 250V – neon indicator (otHeR coLoURS)
30nPa 250V - neon indicator (PoWeR aVaILaBLe)
Colours available are Blue, Green, Amber and Transparent. Other voltages are also available, including 6, 12, 24, 32, 48, 110 and 440. Suitable for DC loads.To order, add voltage to Cat. No. (for example, 30N12). Neons draw 250-275mW at 240V. Note: Inductive loads occasionally cause neons to glow in OFF position. To prevent this, place a 47kΩ, 0.5W 240V resistor across the terminals. Neutral and Active can be connected to either terminal.
LabeLLed 10a MecHanisMs
Image cat no. DeScRIPtIon
30Fm 250V/10a, 2 way (marked “Fan”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Hm 250V/10a, 2 way (marked “Heat”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30em 250V/10a, 2 way (marked “eXHaUSt”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Lm 250V/10a, 2 way (marked “LIgHt”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mam 250V/10a, 2 way (marked “manUaL-aUto”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Pm 250V/10a, 2 way (marked “DISPoSaL”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Xm 250V/10a, 2 way (marked “WaSte”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Ym 250V/10a, 2 way (marked “WaSH”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30aUm 250V/10a, 2 way (marked “aUto”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
*Also available in 16A. To order specify suffix ‘16’ eg. 30FM16
30 Series Switch Mechanisms
Labelled Switch MechanismsSchneider Electric offers a broad range of labelled 30 series switch mechanisms for easy identification when several switches
are installed on the same switchplate or when there is any chance of confusion over the load controlled.
30Hm
30Fm
30n-ReD
30nPa
30/2nm
30Km
21
LabeLLed 10a MecHanisMs (continued)
Image cat no. DeScRIPtIon
30acm 250V/10a, 2 way (marked “aIR con”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30PUm 250V/10a, 2 way (marked “PUmP”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Bm 250V/10a, 2 way (marked “BatH”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Km 250V/10a, 2 way (marked “KItcHen”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30Fnm 250V/10a, 2 way (marked “oFF/on”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30HLm 250V/10a, 2 way (marked “HI/LoW”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mSen 250V/10a, 2 way (marked “SenSoR”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30moS 250V/10a, 2 way (marked “oUtSIDe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mFR 250V/10a, 2 way (marked “FoRWaRD/ReVeRSe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mFD 250V/10a, 2 way (marked “FRIDge”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mmW 250V/10a, 2 way (marked “mIcRoWaVe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30mBPR 250V/10a, Bell press rocker – offers facility for momentary on or oFF. Suitable for extra low voltage applications (one Looping terminal).
39m 250V/10a, 3 Position – marked “HI-oFF-Lo”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.
39maom 250V/10a, 3 Position – marked “on-aUto-manUaL”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.
39mSon 250V/10a, 3 Position – marked “SenSoR-oFF-on”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.
30Fnm
30HLm
30mSen
30moS
30 Series Switch Mechanisms
39maom
10a iLLuMinated rocKer switcH MecHanisMs – witH Messages
Image cat no. DeScRIPtIon
30/2nmSen
30/2nmSen
250V/10a – 2 way inbuilt neon (marked “SenSoR”). neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminals of bore 3.9mm ø. Body fits 34mm ø hole.
30/2nmoS
250V/10a – 2 way inbuilt neon (marked “oUtSIDe”). neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminals of bore 3.9mm ø. Body fits 34mm ø hole.
note: neutral is not required.additional messages available. contact Schneider electric customer care for details. Free phone 0508 254 7725.typical messages:– Range - Heat/cooL - ReSet - LIVIng - HI/Lo - SPa - DaY nIgHt - HWS - Lo - oFF - on.
22
LabeLLed 20a MecHanisMs
Image cat no. DeScRIPtIon
30m20HW 250V/20a, 2 way (marked “Hot WateR SeRVIce”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
LabeLLed 35a MecHanisMs
Image cat no. DeScRIPtIon
30m35HoB 250V/35a, 2 way (marked “HoB”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30m35oV 250V/35a, 2 way (marked “oVen”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.
30m35R 250V/35a, 2 way (marked “Range”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.30m35oV
35A
30m20HW
20A
30 Series Switch Mechanisms
23
diMMer, Fan controL and surge FiLter MecHanisMs
Image cat no. DeScRIPtIon
32e450Lm c-thru® Dimmer mechanism, Leading edge (suits incandescent lighting and low voltage lighting using iron core transformers), 220 - 240V/450W.
32e450tm c-thru® Dimmer mechanism, trailing edge (suits incandescent lighting and low voltage lighting using electronic transformers), 220 - 240V/450W.
32e500Fm c-thru® Fan Speed controller mechanism, 220-240V/500W.
32e450UDm c-thru® Dimmer Universal (suits leading, trailing and fan speed controllers).
30PotDm Dimmer Potentiometer (suits products such as 32 Series High Powered Dimmers, 780 Series and the 761 Series).
30PotFm Fan controller Potentiometer (suits products such as 32 Series High Powered Dimmers & 761 Series).
30SFm Surge Filter mechanism – 250V 10a
circuit identiFication and bLanKing products
Image cat no. DeScRIPtIon
30P Removable Blank Plug, to suit or blank out 30 Series aperture.
30PID Removable Plug, with identification facility, supplied with tamper proof transparent cover.
30PFo Plug, marked “FRIDge - FReeZeR onLY”.
30PIDa4L Label Sheets, 10 x a4 packet, red and white available (non-adhesive).
30 Series Switch Mechanisms
32e450Lm
32e450tm
32e500Fm
30PotFm
30SFm
30P
30PID
24
aM MecHanisMs
Image cat no. DeScRIPtIon
30FFPFmS Socket F type - PaL Female Straight
30FaVRgB Socket F type aV composite Red green and Blue
30FaVRWY Socket F type aV composite Red White and Yellow
30FaVRWo Socket F type aV Digital audio Red White and orange
30FaVY Socket F type composite Video - Yellow
30FaVB Socket F type aV - Sub Woffer - Black
speaKer MecHanisMs
Image cat no. DeScRIPtIon
30BcRm Banana connector Red (Used for speaker cabling only)
30BcBm Banana connectorBlack (Used for speaker cabling only)
data MecHanisMs
Image cat no. DeScRIPtIon
30RJ88Sma5 category 5 connector mechanisms, modular socket, category 5, 568a, RJ45 with flexible locking tabs Shuttered
30RJ88Sma5SH category 5 connector mechanisms, modular socket, category 5, 568a, RJ45 with flexible locking tabs
30RJ88Sma6 category 6 connector mechanisms, modular socket, category 6, 568a, RJ45 with flexible locking tabs
30RJ88Sma6SH category 6 connector mechanisms, modular socket, category 6, 568a, RJ45 with flexible locking tabs, shuttered
30 Series Switch Mechanisms
30FaVRgB
30FaVRWY
30FaVRWo
30BcRm
30RJ88Sma5
30RJ88Sma5SH
30RJ88Sma6
30RJ88Sma6SH
25
The next level
Available in white or black with a range of seven superb metal cover finishes, there’s something to suit every taste and budget.
C-Bus C2000 can go beyond the simple on/off switch delivering unlimited dimming, switching and home automation control found in all C-Bus enabled switches. Perfect if you’re are keen on keeping the same style of switches throughout your entire home, but only want select rooms to incorporate home automation features.
C5032NL C5034NL
26
Make the most of your energyWorld energy consumption has risen 45% since 1980 and it is projected to be 70% higher by 2030. To limit energy cost and its impact on the environment, we must learn to adapt and manage energy consumption, costs and pollutants. Schneider Electric is committed to reducing the energy cost and CO2 emission of its customers.
Our products, solutions and services are present at every link in the energy value chain for the building, infrastructure, industry and residential market to ensure your comfort and performance, while taking into account environmental issues.
This catalogue was printed at Blue Star Print Group (NZ) Ltd, who are FSC Chain of Custody certified, using FSC Chain of Custody paper. FSC (Forest Stewardship Council) is an international, not-for-profit membership-based organisation that brings people together to find solutions to problems created by bad forestry practices and to reward good management. The FSC Chain of Custody is the highest and most trustworthy international certification for paper and timber products. This catalogue was manufactured using mineral oil free ink (produced with renewable resources, unlike traditional mineral oil based inks). The mill where the paper is manufactured is ISO 14001, the paper is Elemental Chlorine Free (ECF) and the pulp is Mixed Sources FSC certified.
SCS COC 001217
27
Customer Care: 0508 254 7725 Freefax: 0508 250 305Email: [email protected] N
ZCLI
PC20
00TG
1008
Schneider Electric (NZ) Ltd.
14 Charann Place, Avondale, Auckland 1026PO Box 15355, New Lynn, Waitakere 0640Tel: +64 9 829 0490Fax: +64 9 829 0491www.schneider-electric.co.nz
133238
C2000 Products are available through electrical wholesalers New Zealand wide.C2000 Products are designed to ISO 9001 and ISO 9002.© 2009 Schneider Electric. As standards, specifications and designs change from time to time, always ask for confirmation of the information given in this publication.