clamping systems - celada · 017 05 považská bystrica fax/tel.: 00421 42 4331990 . elero, s.r.o....
TRANSCRIPT
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 1 -
Clamping system EROWA
Clamping system SYSTEM 3R
The best-selling clamping system for EDM wire cutters - WEDM at affordable prices
The best-selling clamping system for electrode production for die-sinking EDM at affordable prices – palletisation compatible with EROW.A
The best-selling clamping system for electrode production for die-sinking EDM at affordable prices – palletisation compatible with 3-R
EROWA is the most widely used clamping system in the world.
CLAMPING SYSTEMS
This page shows a very
small sample of EROWA
Clamping Systems. Please
contact us for full details of
their full range.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. Page: - 2 -
Clamping systems for die sinking EDM:
- Clamping system ITS (7,3MB)
- Clamping system ITS Compact Combi (1,8MB)
- Clamping system PowerChuckP (1,6MB)
- Clamping system UPC (1,5MB)
- Clamping system MTS (9,6MB)
Clamping systems for WEDM:
- Clamping system for wire cutting EDM (5,7MB) Clamping systems for chip removal production:
- Clamping system PowerChuckP (1,6MB)
- Clamping system ProductionChuck210 (1,6MB)
- Clamping system Centrovacie zveráky (1,2MB)
- Clamping system ClampSet (1,1MB)
- Clamping system FTS (0,9MB)
- Clamping system PM (1,3MB)
- Clamping system UPC (1,5MB)
- Clamping system MTS (9,6MB)
CLAMPING SYSTEM EROWA
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining System 3R is registered trademark and brand name of company System 3R. Section: 9. Page: - 3 -
Clamping system for die-sinking EDM and clamps for electrode production
- Macro Junior and Macro Combi (2,8MB)
- Macro Standard and Macro High Performance (4,9MB)
- Macro Nano (1,4MB)
- Macro Magnum (2,3MB)
- Matrix (1,6MB)
- GPS240 (2,6MB)
- Dynafix (1,8MB)
- Maxi (1,4MB)
- Mini (1,9MB)
- 3Refix (1,1MB)
- Delphin and Delphin Big (1,6MB) Click on the picture to download full catalog (10,3MB)
Clamping system for WEDM (7,1MB) Click on the picture to download full catalog (7,1MB) Clamping system for chip removal production
- Macro (3,5MB)
- Macro Standard and Macro High Performance (4,9MB)
- Macro Nano (1,4MB)
- Macro Magnum (2,3MB)
- Matrix a Matrix Nano (1,5MB)
- GPS240 (2,6MB)
- Dynafix (1,8MB)
- Delphin and Delphin Big (1,6MB)
Click on the picture to download full catalog (7,4MB)
CLAMPING SYSTEM –
SYSTEM 3R
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Section: 9. Page: - 4 -
Item No.: TCSS22x60x12+18 Top clamp - stainless steel 22x60x12+18mm, M8 Hardened treatment
High-precision clamping system for EDM wire cutters
THE BEST SELLING CLAMPING SYSTEM
FOR EDM WIRE CUTTERS - WEDM
AT AFFORDABLE PRICES
View Z=0 View Z+5mm
Top View Bottom View
Item No.: 5648/53145-02/WPV320
High-precision stainless steel vice with 3D micro adjusting in 3 axis, clamping range 0-190mm
Item No.: DSRSSM8 L mm
Double sided ruler stainless steel Z=0 also Z=+5mm, clamping distance = to dimensions of EDM wire cutter working table, with micro-adjusting. Option M8, alternatively M6, …
Item No.: MACSS60X220
Adjustable clamp - stainless steel 60x220+5mm, M8, with micro adjusting, Z=0 also Z=+5mm
Item No.: MACSS60X220/cust6
Adjustable clamp - stainless steel 60x220+5mm, M6, with micro adjusting, Z=0 also Z=+5mm
Item No.: TCSS23x70x12
Top clamp – stainless steel
23x70x12mm, M8
Hardened treatment
Item No.: TCSS23x90x12
Top clamp – stainless steel
23x90x12mm, M8
Hardened treatment
Hexagonal connectable support pillars stainless steel with outer and inner thread M8 Item No.: HCSPSSM8L30 L=30mm
Item No.: HCSPSSM8L50 L=50mm
Item No.: HCSPSSM8L100 L=100mm
Detail
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Section: 9. Page: - 5 -
Item No.: SCESSM8 Set - 181 pieces of clamping elements stainless steel M8 - screws, nuts, washers, clamps and hexagonal support pillars in practical box
Item No.:
CSSS M8x20mm – 8pcs
CSSS M8x30mm – 8pcs
CSSS M8x40mm – 8pcs
CSSS M8x50mm – 8pcs
CSSS M8x60mm – 8pcs
CSSS M8x70mm – 8pcs
CSSS M8x80mm – 8pcs
CSSS M8x90mm – 8pcs
CSSS M8x100mm – 8pcs
CSSS M8x110mm – 8pcs
CSSS M8x120mm – 8pcs
CSSS M8x140mm – 8pcs
CSSS M8x150mm – 8pcs
CSSS M8x160mm – 8pcs
Item No.: CTRSS M8x320 Clamping threaded rods stainless steel M8x320mm – 8pcs
Item No.: TCSS23x70x12 Top clamp - stainless steel M8, 23x70x12mm hardened – 8pcs
Hexagonal connectable support pillars stainless steel with outer and inner thread M8
Item No.: HCSPSSM8L30 Item No.: HCSPSSM8L50 Item No.: HCSPSSM8L100 L=30mm - 8pcs L=50mm - 8pcs L=100mm - 8pcs
Item No.: PBSCESS Plastic box for set of clamping elements stainless steel – empty, 290x340x205mm
Possible to order individual elements from set separately. We can provide different sizes of clamps and clamping screws with hexagon socket head in different lengths, diameters and in stainless finish.
Item No.: WSS D8 Washer stainless steel Ø=8mm – 8pcs
Set consist of:
Clamping screws stainless steel M8 with hexagon socket head
Item No.: TCSS23x90x12 Top clamp - stainless steel M8, 23x90x12mm hardened – 8pcs
Item No.: TCSS22x60x12+18 Top clamp - stainless steel M8, 22x60x12+18mm hardened – 4pcs
High-precision clamping system for EDM wire cutters
Item No.: NSS M8 Nut stainless steel M8 – 8pcs
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Section: 9. Page: - 6 -
Item No.:
CSSS M6x20mm – 8pcs
CSSS M6x30mm – 8pcs
CSSS M6x40mm – 8pcs
CSSS M6x50mm – 8pcs
CSSS M6x60mm – 8pcs
CSSS M6x70mm – 8pcs
CSSS M6x80mm – 8pcs
CSSS M6x90mm – 8pcs
CSSS M6x100mm – 8pcs
CSSS M6x110mm – 8pcs
CSSS M6x120mm – 8pcs
CSSS M6x140mm – 8pcs
CSSS M6x150mm – 8pcs
CSSS M6x160mm – 8pcs
Item No.: CTRSS M6x320 Clamping threaded rods stainless steel M6x320mm – 8pcs
Item No.: TCSS23x70x12/M6 Top clamp - stainless steel M6, 23x70x12mm hardened – 8pcs
Hexagonal connectable support pillars stainless steel with outer and inner thread M6
Item No.: HCSPSSM6L30 Item No.: HCSPSSM6L50 Item No.: HCSPSSM6L100 L=30mm - 8pcs L=50mm - 8pcs L=100mm - 8pcs
Item No.: PBSCESS Plastic box for set of clamping elements stainless steel – empty, 290x340x205mm
Possible to order individual elements from set separately. We can provide different sizes of clamps and clamping screws with hexagon socket head in different lengths, diameters and in stainless finish.
Item No.: WSS D6 Washer stainless steel Ø=6mm – 8pcs
Set consist of:
Clamping screws stainless steel M6 with hexagon socket head
Item No.: TCSS23x90x12/M6 Top clamp - stainless steel M6, 23x90x12mm hardened – 8pcs
Item No.: TCSS22x60x12+18/M6 Top clamp - stainless steel M6, 22x60x12+18mm hardened – 4pcs
High-precision clamping system for EDM wire cutters
Item No.: SCESSM6 Set - 181 pieces of clamping elements stainless steel M6 - screws, nuts, washers, clamps and hexagonal support pillars in practical box
Item No.: NSS M6 Nut stainless steel M6 – 8pcs
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Section: 9. Page: - 7 -
High-precision clamping system for EDM wire cutters
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 8 -
High-precision clamping system for EDM wire cutters 5648/53145-02/WPV320
High-precision stainless steel vice with 3D micro adjusting in 3 axis, clamping range 0-190mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 9 -
High-precision clamping system for EDM wire cutters
4x MACSS60X220 Adjustable clamp - stainless steel 60x220+5mm, M8, with micro adjusting, clamping in level Z=0mm
4x MACSS60X220 Adjustable clamp - stainless steel 60x220+5mm, M8, with micro adjusting, clamping in level Z=+5mm
1x DSRSSM8 Double sided ruler stainless steel M8 resp. M6
+ 2x MACSS60X220 Adjustable clamp - stainless steel
60x220+5mm, M8, with micro adjusting, clamping in level
Z=0mm
1x DSRSSM8 Double sided ruler stainless steel M8 resp. M6
+ 2x MACSS60X220 Adjustable clamp - stainless steel
60x220+5mm, M8, with micro adjusting, clamping in level
Z=+5mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 10 -
High-precision clamping system for EDM wire cutters
Cla
mpin
g d
ista
nce
C
2x DSRSSM8 L mm
Double sided ruler stainless steel Z=0mm also Z=+5mm, clamping distance C = to dimensions of EDM wire cutter working table, with micro-adjusting. Option M8, alternatively M6, …
2x DSRSSM8 L mm
Double sided ruler stainless with micro-adjusting. Option M8, alternatively M6, … Clamping in level Z=0mm
2x DSRSSM8 L mm
Double sided ruler stainless with micro-adjusting. Option M8, alternatively M6, … Clamping in level Z=+5mm
MACSS60X220
Adjustable clamp - stainless steel 60x220+5mm,
M8, with micro adjusting, Z=0 also Z=+5mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 11 -
High-precision clamping system for EDM wire cutters
Item No.: PO-T0003 Manual quick chuck ITS50 for wire cutting EDM compatible with EROW.A
PO-3MT003 Manual quick chuck for wire cutting EDM compatible with 3-R
Item No.: PO-T0004 Manual quick chuck ITS50 for wire cutting EDM with micro-adjustable function compatible with EROW.A
PO-T0004-1 Manual quick chuck ITS100 for wire cutting EDM with micro-adjustable function compatible with EROW.A
PO-3MT004 Manual quick chuck for wire cutting EDM with micro-adjustable function compatible with 3-R
Item No.: PO-T0001 V shape wire cut EDM holder ITS50, compatible with EROW.A
PO-3MT0001 V shape wire cut EDM holder, compatible with 3-R
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 12 -
High-precision clamping system for EDM wire cutters
Item No.: PO-T0120 Prism holder for round and square pieces Clamping range Ø10-120mm, □ 120x120mm
Especially suitable for use in a vise 53145-02/WPV320 with the possibility of 3D micro-adjusting.
Or it is possible to mount directly on the working table Of wire cutting machines.
Item No.: PO-T0002 3-axies high precision vise – pendulum, compatible with EROW.A With microadjusting in 3axis, clamping range 0-100mm, angle setting 0-360°
PO-3MT0002 3-axies high precision vise – pendulum, compatible with 3-R With microadjusting in 3axis, clamping range 0-100mm, angle setting 0-360°
Obj. č.: 54060/MWL-C Permanent magnetic chuck for wire-cutting EDM
- suitable also for work in water and in liquids
Item No.: PO-V0004 Dividing device with chuck ITS100, tilting +90°/-10°, with fine tuning 360°, compatible with EROW.A PO-3MV0004 Dividing device with chuck ITS100, tilting +90°/-10°, with fine tuning 360°, compatible with 3-R
Length Width Height Netto weight
190 46 54 3,7kg
Units: mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 13 -
High-precision clamping system for EDM wire cutters
Item No.: 53210-04 Dividing device stainless steel with fine tuning 360°, with ER32 collets chuck. Possible to order also with ER20 or ER50 collets chuck. Clamping range Ø2,0- Ø34mm.
Item No.: 53210-10 Dividing device stainless steel, with manual quick chuck ITS100, with fine tuning 360°, compatible with EROW.A
Item No.: 53210-08 Stainless dividing device with manual quick chuck 3-R, with fine tuning 360°, compatible with 3-R
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 14 -
High-precision clamping system for EDM wire cutters
Stainless scroll chucks
Item no.: SSSC35 SSSC55 SSSC70 SSSC100 SSSC140 SSSC160
D1 35 56 70 119 138 159
D2 12 11 8,2 15,2 58 23
H 18,5 30 30 42,7 43,6 108,8
d1 0 – 14 0 – 16 0 – 20 0 - 40 0 – 44 0 - 56
d2 20 – 32 12 – 24 15,4 – 32 28 – 60 30 – 47 30 – 80
d3 - 22 – 34 27,4 – 44 48 – 80 60 – 104 58 – 108
d4 - 32 – 44 39,4 - 56 68 – 100 90 – 134 86 -136
s 4,5 3 3 4,5 4,5 7
o1 11-23 13 – 28 12 – 32 20 – 60 24 – 68 24 – 68
o2 - 23 – 38 24 - 44 40 – 80 54 – 98 52 – 110
o3 - 33 – 48 36 - 56 68 – 100 84 – 128 84 – 128
Weight 85g 280g 380g 1,6kg 2,2kg 5kg
Jaws Stainless, hardened, reversible, grinded
Also possible to order 4-jaws stainless scroll chucks
Flange Custom made according to customer´s request.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 15 -
High-precision clamping system for EDM wire cutters
Item No.: Q128E Manual quick chuck ITS100, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with EROW.A
Item No.: Q128/3-R Manual quick chuck, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with 3-R
Item No.: W80
3D micro adjusting head Pitch angle ±3°
Item No.: H128E Manual chuck ITS100, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with EROW.A
Item No.: H128/3-R Manual chuck, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with 3-R
Item No.: W100
Workpiece fixing plate
Item No.: W160
Workpiece fixing plate
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 16 -
Palletisation for wire-cutting EDM
Palletisation for wire-cutting EDM speeds up and streamline the production process, by clamping and centring the workpieces out of the wire-cutting machine – on pre-setting workplace PO-M0010E resp. PO-3M0010. Wire-cutting EDM can machining workpiece while is another workpiece clamping and centring on pre-setting table, what eliminates time losses during clamping and centring the workpiece directly in the wire-cutting EDM. Clamping chucks on pre-setting workplace and in the wire-cutting EDM are alignment with calibration block PO-N0006. Repeating clamping accuracy of both clamping chucks is ≤0,002mm. Workpiece is first clamped into the most appropriate clamp (vise, fixing plates, prism holder ...) which is mounted on 3D micro-adjusting head W80AE. Such complete set - pallet (workpiece clamped in appropriate clamp and mounted on 3D micro-adjusting head), is clamped into manual quick chuck on pre-setting workplace. Simple turning with 3 screws on micro-adjusting head W80AE allows quick centring of workpiece. The workpiece level is checked with lever indicator with fine dividing segments 0,002mm, which is part of pre-setting workplace. Pallet of clamps with centred workpiece is clamped off from the pre-setting workplace and moved to the manual quick chuck Q128E in the wire-cutting EDM. Now it is not necessary centring the workpiece into wire-cutting machine and operator can start the cutting process immediately after inserting the pallet into wire-cutting EDM. Operator can centring another workpiece on pre-setting workplace while is wire-cutting machine into operation, what increasing the usage of wire-cutting EDM. Alignment of manual quick chucks on pre-setting workplace and in the wire-cutting EDM
Examples of palletisation clamps for wire-cutting EDM
Item No.: 55280/KX115602102
High precision lever indicator, measuring range ±0,2mm, min. segment 0,002mm, diam. 40mm
Item No.: PO-N0006 Calibration block 100x60, ITS50
Item No.: 54930-03/BS330L Universal arm 185+145+70mm for lever indicator
Item No.: PO-K8080 Manual square quick chuck 80x80mm, with base, ITS100
Item No.: PO-N0006 Calibration block 100x60, ITS50
Item No.: Q128E Manual quick chuck ITS100, for wire cutting EDM
Item No.: PO-M0010E Pre-setting checking workplace with manual quick chuck, universal arm and high precision indicator
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 17 -
Palletisation for wire-cutting EDM
3D micro-adjusting head W80AE with vise 53110/WST100
3D micro-adjusting head W80AE with workpiece fixing plate W100
3D micro-adjusting head W80AE with prism holder PO-T0120
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 18 -
Paletizácia pre drôtové rezačky
Item No.: W80AE 3D micro-adjusting head, compatible with EROW.A
Item No.: W80A/3-R 3D micro-adjusting head, compatible with 3-R
Item No.: Q128E Manual quick chuck ITS100, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with EROW.A Item No.: Q128/3-R Manual quick chuck, clamping force 10 000 N. Suitable for EDM wire cutters, compatible with 3-R
Item No.: W100
Workpiece fixing plate
Item No.: W160
Workpiece fixing plate
Item No.: 53110/WST100
Stainless vise 0-105mm
Item No..: PO-T0120
Prism holder for round and square pieces
Clamping range Ø10-120mm, □ 120x120mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 19 -
High-precision clamping system for EDM wire cutters
Item No.: PO-M0010E Pre-setting checking workplace with manual quick chuck, compatible with EROW.A
Item No.: PO-3M0010 Pre-setting checking workplace with manual quick chuck, compatible with 3-R
Item No.: PO-M0011E Presetting checking workplace with pneumatic chuck, compatible with EROW.A
Item No.: PO-3M0011 Presetting checking workplace with pneumatic chuck, compatible with 3-R
Item No.: PO-W0001E 3D pre-setting and checking detector, with manual chuck compatible with EROW.A
Item No.: PO-W0001/3-R 3D pre-setting and checking detector, with manual chuck compatible with 3-R
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 20 -
Clamping systems compatible with EROW.A
The following components of the palletisation clamping system enable the material for the electrode (copper, graphite etc.) to be clamped directly into the pallet or into the collet chuck holder. The material can then be machined in a machining centre, milling machine, lathe, grinding machine or EDM wire cutter etc. The finished product (the electrode), whilst still clamped into pallet or collet chuck holder, can now be clamped directly to the EDM die-sinker without the need for further adjustment of the electrode. Repeatable accuracy for the positioning of the pallets or collet chuck holders into the clamping chucks is 0,002mm.
Clamping pallets Uniholder ITS50, with transversal groove
Brass: Item No.: PO-C0001-1 Clamping pallet U10 brass, width of transversal groove 10,5mm PO-C0001 Clamping pallet U15 brass, width of transversal groove 15,5mm PO-C0002 Clamping pallet U20 brass, width of transversal groove 20,5mm PO-C0003 Clamping pallet U25 brass, width of transversal groove 25,5mm
Aluminium: Item No.: PO-D0001-1 Clamping pallet U10 aluminium, width of transversal groove 10,5mm PO-D0001 Clamping pallet U15 aluminium, width of transversal groove 15,5mm PO-D0002 Clamping pallet U20 aluminium, width of transversal groove 20,5mm PO-D0003 Clamping pallet U25 aluminium, width of transversal groove 25,5mm
Stainless steel: Item No.: PO-B0001-1 Clamping pallet U10 stainless steel, width of transversal groove 10,5mm PO-B0001 Clamping pallet U15 stainless steel, width of transversal groove 15,5mm PO-B0002 Clamping pallet U20 stainless steel, width of transversal groove 20,5mm PO-B0003 Clamping pallet U25 stainless steel, width of transversal groove 25,5mm
Different sizes of the clamping groove: 10,5mm, 15,5mm, 20,5mm, 25,5mm
THE BEST SELLING CLAMPING SYSTEM FOR
ELECTRODE PRODUCTION FOR DIE-SINKING
EDM AT AFFORDABLE PRICES,
PALLETISATION COMPATIBLE WITH EROW.A
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 21 -
Clamping systems compatible with EROW.A
Item No.:
PO-B0004 Clamping pallet U30 stainless steel, width of clamping groove 30,5mm
Clamping pallets Prisround ITS50, with hole
Brass: Item No.: PO-C0005-1 Clamping pallet S10 brass, hole 11,5x11,5mm PO-C0005 Clamping pallet S15 brass, hole 16,5x16,5mm PO-C0006 Clamping pallet S20 brass, hole 21,5x21,5mm PO-C0007 Clamping pallet S25 brass, hole 26,5x26,5mm PO-C0007-1 Clamping pallet S30 brass, hole 31,5x31,5mm
Aluminium: Item No.: PO-D0005-1 Clamping pallet S10 aluminium, hole 11,5x11,5mm PO-D0005 Clamping pallet S15 aluminium, hole 16,5x16,5mm PO-D0006 Clamping pallet S20 aluminium, hole 21,5x21,5mm PO-D0007 Clamping pallet S25 aluminium, hole 26,5x26,5mm PO-D0007-1 Clamping pallet S30 aluminium, hole 31,5x31,5mm
Stainless steel: Item No.: PO-B0005-1 Clamping pallet S10 stainless steel, hole 11,5x11,5mm PO-B0005 Clamping pallet S15 stainless steel, hole 16,5x16,5mm PO-B0006 Clamping pallet S20 stainless steel, hole 21,5x21,5mm PO-B0007 Clamping pallet S25 stainless steel, hole 26,5x26,5mm PO-B0008 Clamping pallet S30 stainless steel, hole 31,5x31,5mm
Different dimensions of clamping holes: 11,5x11,5, 16,5x16,5, 21,5x21,5, 26,5x26,5, 31,5x31,5mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 22 -
Clamping systems compatible with EROW.A
Clamping pallets Uniplate, flat
Item No.: PO-C0004 Clamping pallet 51x51mm brass ITS50, flat PO-D0004 Clamping pallet 51x51mm aluminium ITS50, flat PO-B0009 Clamping pallet 51x51mm stainless steel ITS50, flat
Item No.: PO-C0008 Clamping pallet 81x51mm brass ITS50, flat PO-B0010 Clamping pallet 81x51mm stainless steel ITS50, flat
Item No..:
PO-B0010-A Clamping pallet 130x51mm stainless steel ITS100, flat
Item No.: PO-B0011 Clamping pallet 150x92mm stainless steel ITS100, flat
For clamping extra large flat electrodes
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 23 -
Clamping systems compatible with EROW.A
Item No.:
PO-A0001 Centring plates of clamping system ITS, size 50 – 2pcs, including screws 4pcs/set
Item No.:
PO-A0002 Centring plates of clamping system ITS, size 100 – 2pcs, including screws 4pcs/set
Item No.:
PO-A0003 Centring G plate, including screws 4pcs/plate
Item No.: PO-Q0004 Spigot ITS
Suitable also for the automatic exchange with internal flushing hole.
Item No..:
PO-Q0013 Replacing ring for automatic spigots ITS
Item No.:
PO-Q0001 Electronic chip
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 24 -
Clamping systems compatible with EROW.A
Item No.:
PO-U0001 D72 stainless steel clamping pallet ITS, hole 26,5 x 26,5mm
Item No.:
PO-U0002 D72 stainless steel clamping pallet ITS, groove 20,5mm
Item No.:
PO-U0003 D72 stainless steel clamping pallet ITS, flat with fastening screws
Item No.:
PO-U0004 D72 stainless steel clamping pallet ITS, flat
Item No.:
PO-U0005 D115 stainless steel reference pallet ITS
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 25 -
Clamping systems compatible with EROW.A
Item No.:
PO-U0006 D148 stainless steel reference pallet ITS, hole raster 25mm
Copper electrodes blank
Item No. Shank Head Total length Packing
PO-R0004 15x15 mm
Shank length
32mm
20x20 mm 75 mm 10pcs
PO-R0005 25x25 mm 75 mm 10pcs
PO-R0006 30x30 mm 75 mm 10pcs
PO-R0007 35x35 mm 75 mm 10pcs
PO-R0008 40x40 mm 75 mm 10pcs
Item No. Shank Head Total length Packing
PO-R0009 25x25 mm
Shank length
40mm
30x30 mm 75 mm 10pcs
PO-R0010 30x30 mm 90 mm 10pcs
PO-R0011 40x40 mm 75 mm 10pcs
PO-R0012 40x40 mm 90 mm 10pcs
PO-R0013 50x50 mm 85 mm 10pcs Item No.:
PO-X0001 Plastic shelf for 12 pcs standard holders ITS50 194x258x67mmn
Item No.:
PO-X0002 Aluminium shelf for 20 pcs standard holders ITS50 255x390x67mm
Item No. Dimensions Shank Length Packing
PO-R0001 15x15x80 mm 32mm 20pcs/set
PO-R0002 25x25x75 mm 40mm 20pcs/set
PO-R0003 25x25x90 mm 40mm 20pcs/set
We can deliver the same blanks also from graphite
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 26 -
Clamping systems compatible with EROW.A
Item No.: PO-K0010 Manual quick chuck ITS100, clamping force 10 000 N. Suitable for lathe, milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines... .
Item No.: PO-K0011 Manual quick chuck ITS100 with base, clamping force 10 000 N. Suitable for milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines...
Item No.: Q128E Manual quick chuck ITS100 for EDM wire cutters, clamping force 10 000N.
Item No..: PO-K0012 Manual quick chuck ITS100 with base, clamping force 10 000N. Suitable for milling machines, machining centre, grinding machines, die sinking EDM, ... .
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 27 -
Clamping systems compatible with EROW.A
Item No.: PO-K0013 Manual quick chuck ITS100 with base, clamping force 10 000N. Suitable for die sinking EDM
Item No.: PO-K0014 Vertical manual quick chuck ITS100, clamping force 10 000N.
Item No.: PO-K0015 Horizontal and vertical manual quick chuck ITS100, clamping force 10 000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 28 -
Clamping systems compatible with EROW.A
Item No.: PO-S0001 Manual chuck ITS50, clamping force 45000N. Item No.: PO-S0002 Workholding plate with 3 manual chucks ITS50, clamping force 4500N.
Item No.: PO-S0003 Workholding plate with 6 manual chucks ITS50, clamping force 4500N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 29 -
Clamping systems compatible with EROW.A
Item No.: PO-L0001 Manual quick chuck ITS50, clamping force 4000N.
Item No.: PO-L0003 Manual quick chuck ITS50 with extension arm, clamping force 4000N.
Item No.: PO-L0005 Vertical manual quick chuck ITS50, clamping force 4000N.
Item No.: PO-L0006 Manual quick chuck ITS50 with connection rod Ø20mm, clamping force 4000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 30 -
Clamping systems compatible with EROW.A
Item No.: PO-G0001 Pneumatic chuck ITS100, with base, clamping force 10 000N. Suitable for milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines... .
Item No.: PO-G0002 Pneumatic chuck ITS100, with base, clamping force 10 000N. Suitable for die-sinking EDM
Item No.: PO-G0003 Pneumatic chuck ITS100, with base, clamping force 10 000N. Suitable for milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines... .
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 31 -
Clamping systems compatible with EROW.A
Item No.: PO-R0001 D150mm pneumatic chuck ITS100, with base, clamping force 15 000N.
Item No.: PO-G0004 Workholding plate with 2 pneumatic chucks ITS100, clamping force 10 000N.
Item No.: PO-G0005 Workholding plate with 3 pneumatic chucks ITS100, clamping force 10 000N.
Item No.: PO-G0006 Workholding plate with 4 pneumatic chucks ITS100, clamping force 10 000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 32 -
Clamping systems compatible with EROW.A
Item No.: XP-G0007 Workholding plate with 6 pneumatic chucks ITS100, clamping force 10 000N.
Item No.: XP-G0008 Workholding plate with 9 pneumatic chucks ITS100, clamping force 10 000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 33 -
Clamping systems compatible with EROW.A
Item No.: XP-G0009 Vertical pneumatic chuck ITS100, clamping force 10 000N.
Item No.: XP-G0010 Horizontal and vertical pneumatic chuck ITS100, clamping force 10 000N.
Item No.: PO-E0001 80mm square pneumatic chuck ITS100, clamping force 7000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 34 -
Clamping systems compatible with EROW.A
Item No.: PO-E0005 80mm square pneumatic chuck ITS100, with base, clamping force 7000N.
Item No.: PO-E0008 80mm square pneumatic chuck ITS100, with base, clamping force 7000N.
Item No.: PO-E0009 80mm square pneumatic chuck ITS100, with connection rod 25mm, clamping force 7000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 35 -
Clamping systems compatible with EROW.A
Item No.: PO-F0002 Thin workholding plate with 4 pneumatic chucks ITS50, clamping force 6000N.
Item No.: PO-F0003 Thin workholding plate with 6 pneumatic chucks ITS50, clamping force 6000N.
Item No.: PO-F0001 Thin workholding plate with 9 pneumatic chucks ITS50, clamping force 6000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 36 -
Clamping systems compatible with EROW.A
Item No.: PO-H0001
Pneumatic chuck for heavy duty machining, clamping force 24 000N.
Item No.: PO-H0002 Pallet for heavy duty machining, use only with pneumatic chuck PO-H0001
Item No.: PO-J0002
Workholding plate with 2 pneumatic chucks, for heavy duty machining. Clamping force 20 000N.
Item No.: PO-J0001 Pallet with 2 pneumatic chucks, use only with PO-J0002
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 37 -
Clamping systems compatible with EROW.A
Item No.: PO-J0004 Workholding plate with 4 pneumatic chucks, for heavy duty machining Clamping force 20 000N. Item No.: PO-J0003 Pallet with 4 pneumatic chucks, use only with PO-J0004
Item No.: PO-Q0017 Pneumatic switch for pneumatic chucks control (suitable for EDM)
Item No.: PO-Q0018 Pneumatic switch for pneumatic chucks control (suitable for CNC machines)
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 38 -
Clamping systems compatible with EROW.A
Item No.: PO-N0005 Gauging pin 50x50mm, Φ40mm, ITS50
Item No.: PO-N0006 Parallel calibration pin 100x60mm, ITS50
Item No.: PO-N0007 Calibration pin Φ30mm, ITS50
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 39 -
Clamping systems compatible with EROW.A
Item No.: PO-M0001 Precision stainless steel holder, with clamping hole for electrode shank 25x25mm PO-M0004 Precision stainless steel holder, with clamping hole for electrode shank 15x15mm
Notice: Clamping spigot is not part of packaging Item No.: PO-M0002 Sharp forming tooth stainless steel rod, shank 25x25mm Item No.: PO-M0003 ER32 Collet holder ITS50, for collets ER32, D2 ~ D20
Item No.: ER32-UM/62252-02/NH-ER32B Replacement nut of collet holder PO-M0003 for collets ER32
Item No.: ETS32-UM Replacement nut of collet holder PO-M0003 for collets ETS32
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 40 -
Clamping systems compatible with EROW.A
Item No.: 5975-3203-3220/62179-01 Set of high-precision collets ER32,18 pcs of collets capable clamping the diameters from Φ2 to Φ20mm, in a carry case + key. Also possible to order only single high-precision collet.
Item No.: 5976-02/62120-02 Mini collet chuck holder for collets ER16 with 20mm shank. Suitable for clamping of tube electrodes
Item No.: 5975-1601/62172-101 High precision collet ER16, Φ1-0,5mm 5975-1615/62172-102 High precision collet ER16, Φ1,5-1mm 5975-1602/62172-103 High precision collet ER16, Φ2-1mm 5975-1603/62172-104 High precision collet ER16, Φ3-2mm 5975-1604/62172-105 High-precision collet ER16, Φ4-3mm 5975-1605/62172-106 High-precision collet ER16, Φ5-4mm 5975-1606/62172-107 High-precision collet ER16, Φ6-5mm 5975-1607/62172-108 High-precision collet ER16, Φ7-6mm 5975-1608/62172-109 High-precision collet ER16, Φ8-7mm 5975-1609/62172-110 High-precision collet ER16, Φ9-8mm 5975-1610/62172-111 High-precision collet ER16, Φ10-9mm
Item No.: C-ER16/0,1-0,5mm Seal for tube elect. 0,10-0,50mm for collets ER16 C-ER16/0,6-1,0mm Seal for tube elect. 0,60-1,00mm for collets ER16 C-ER16/1,1-1,5mm Seal for tube elect. 1,10-1,50mm for collets ER16 C-ER16/1,6-2,0mm Seal for tube elect. 1,60-2,00mm for collets ER16 C-ER16/2,1-2,5mm Seal for tube elect. 2,10-2,50mm for collets ER16 C-ER16/2,6-3,0mm Seal for tube elect. 2,60-3,00mm for collets ER16
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 41 -
Clamping systems compatible with EROW.A
Centering sensors ITS50, with fixed sensing pin
Item No.: PO-N0001 Centering sensor with fixed sensing pin with ball 4mm PO-N0001-1 Centering sensor with fixed sensing pin with ball 5mm PO-N0002 Centering sensor with fixed sensing pin with ball 6mm PO-N0003 Centering sensor with fixed sensing pin with ball 8mm
Replaceable sensing pin for centering sensors PO-N0001, PO-N0002 and PO-N0003:
Item No.:
RSP-0004 Replaceable sensing pin with ball 4mm RSP-0005 Replaceable sensing pin with ball 5mm RSP-0006 Replaceable sensing pin with ball 6mm RSP-0008 Replaceable sensing pin with ball 8mm
Centering sensors ITS50, with spring-loaded sensing pin
Item No.: PO-N0004-2 Centering sensors with spring-loaded sensing pin, with ball 2mm PO-N0004-3 Centering sensors with spring-loaded sensing pin, with ball 3mm PO-N0004 Centering sensors with spring-loaded sensing pin, with ball 4mm PO-N0004-1 Centering sensors with spring-loaded sensing pin, with ball 5mm PO-N0004-6 Centering sensors with spring-loaded sensing pin, with ball 6mm
Replaceable sensing pin for spring-loaded centering sensors PO-N0004:
Item No.: RSLSP-0002 Replaceable sensing pin with ball 2mm, for spring loaded sensors RSLSP-0003 Replaceable sensing pin with ball 3mm, for spring loaded sensors RSLSP-0004 Replaceable sensing pin with ball 4mm, for spring loaded sensors
RSLSP-0005 Replaceable sensing pin with ball 5mm, for spring loaded sensors RSLSP-0006 Replaceable sensing pin with ball 6mm, for spring loaded sensors
79 m
m
Ø2, Ø3, Ø4, Ø5 mm Ø6 mm
85 m
m
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 42 -
Clamping systems compatible with EROW.A
Item No.: PO-P0001 Magnetic probe for working table of die sinking EDM, with ball 4mm PO-P0002-1 Magnetic probe for working table of die sinking EDM, with ball 5mm PO-P0002 Magnetic probe for working table of die sinking EDM, with ball 6mm PO-P0003 Magnetic probe for working table of die sinking EDM, with ball 8mm
Item No.: PO-Q0005A Adjusting chuck in X, Y, C axis For square and round electrode clamping up to diameter Ø22mm Net weight 5kg, height 112mm.
Item No.: ST1 Edge finder. Lever indicator holder
Item No.: ST2 360˚ edge finder Lever indicator holder - rotary 360˚
Item No.: 55280 High precision sensitive lever indicator 0,002mm for ST1/ST2
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 43 -
Clamping systems compatible with EROW.A
Item No.: PO-V0001 Angle clamping unit for pallets and electrode holders of clamping system ITS50
Item No.: PO-W0015 Angle electrode holder ITS50, with indexing by 1°, prismatic hole 15x15mm
Item No.: PO-F0006 Angle holder for electrodes Ø6mm with shank 15x15mm, angle setting 0-90° through the nonius
Precision square shank 15x15mm
for clamping of angle holder.
Fluently adjustable 0-90° through the nonius.
Clamping electrode diameter Ø6mm.
For simple clamping and angle setting of electrode; for example when
are channel inlets machining.
Fixation with hydraulic valve in the middle of rotation – fixing the position
without setting angle change.
Simple and quick angle setting allows planchet with indexing by 1°
Electrodes are clamped into the prismatic hole 15x15mm.
Scale 0-90°.
Rotation range 0-180°
Max. load capacity 5kg.
Possibility of connecting internal flushing
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 44 -
Clamping systems compatible with EROW.A
Item No.: PO-V0002 Self centering vise with G plate
Item No.: PO-V0003 Magnetic pallet with G plate
Item No.: PO-T0002 3-axies high precision vise – pendulum, compatible with EROW.A
With microadjusting in 3axis, clamping range 0-100mm, angle setting 0-360°
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 45 -
Clamping systems compatible with EROW.A
Item No.: PO-V0004 Dividing device with chuck ITS100, tilting +90°/-10°, with fine tuning 360°
Item No.: 53210-04 Dividing device stainless steel with fine tuning 360°, with ER32 collets chuck. Possible to order also with ER20 or ER50 collets chuck. Clamping range Ø2,0- Ø34mm.
Item No.: 53210-10 Dividing device stainless steel, with manual quick chuck ITS100, with fine tuning 360°, compatible with EROW.A
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 46 -
Clamping systems compatible with EROW.A
Item No.: PO-V0005 Automatic 90° rotating pneumatic device with chuck ITS100
Item No.: PO-Q0021 Extension aluminium arm for chucks
Item No.: PO-Q0022 Worpiece centering device
Item No.: PO-2080E Camera detector compatible with EROW.A ITS
10´´ 720P HD screen
Precision vision ±0,002mm
Zoom in 5-70 times
Focus distance 50-260mm
Cross mark (manual tuning)
Able to focus by manual tuning
Adjustable screen in 10-20°
Li Battery 4800mA
LED lighting
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 47 -
Clamping systems compatible with EROW.A
Item No.: PO-M0010E Presetting checking workplace with manual quick chuck, compatible with EROW.A
Item No.: PO-M0011E
Presetting checking workplace with pneumatic chuck, compatible with EROW.A
Item No.: PO-W0001E 3D presetting and checking detector, with manual chuck compatible with EROW.A
We can offer many other components of our best-selling clamping systems at affordable prices.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 48 -
Clamping systems compatible with 3-R
The following components of the palletisation clamping system enable the material for the electrode (copper, graphite etc.) to be clamped directly into the pallet or into the collet chuck holder. The material can then be machined in a machining centre, milling machine, lathe, grinding machine or EDM wire cutter etc. The finished product (the electrode), whilst still clamped into pallet or collet chuck holder, can now be clamped directly to the EDM die-sinker without the need for further adjustment of the electrode. Repeatable accuracy for the positioning of the pallets or collet chuck holders into the clamping chucks is 0,002mm.
Clamping pallets Uniholder stainless steel, with transversal groove
Item No.: PO-3M0015-1 Clamping pallets U10 stainless steel, groove width 10,5mm PO-3M0015 Clamping pallets U15 stainless steel, groove width 15,5mm PO-3M0016 Clamping pallets U20 stainless steel, groove width 20,5mm PO-3M0017 Clamping pallets U25 stainless steel, groove width 25,5mm PO-3M0018 Clamping pallets U30 stainless steel, groove width 30,5mm
Different sizes of the clamping groove: 10,5mm, 15,5mm, 20,5mm, 25,5mm, 30,5mm
Clamping pallets Prisround stainless steel, with hole
Item No.:
PO-3M0019-1 Clamping pallets S10 stainless steel, with hole 11,5x11,5mm PO-3M0019 Clamping pallets S15 stainless steel, with hole 16,5x16,5mm PO-3M0020 Clamping pallets S20 stainless steel, with hole 21,5x21,5mm PO-3M0021 Clamping pallets S25 stainless steel, with hole 26,5x26,5mm PO-3M0022 Clamping pallets S30 stainless steel, with hole 31,5x31,5mm
Different dimensions of clamping holes: 11,5x11,5, 16,5x16,5, 21,5x21,5, 26,5x26,5, 31,5x31,5mm
Clamping pallets Uniplate, flat
Item No.:
PO-3M0051 Clamping pallet 51x51mm stainless steel, flat PO-3M0081 Clamping pallet 81x51mm stainless steel, flat PO-3M0092 Clamping pallet 92x150mm stainless steel, flat
THE BEST SELLING CLAMPING SYSTEM FOR
DIE-SINKING EDM AT AFFORDABLE PRICES,
PALLETISATION
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 49 -
Clamping systems compatible with 3-R
Item No.: PO-3M0001 Clamping pallet 54x54mm stainless steel, flat
Item No.: PO-3M0002 Clamping pallet 70x70mm stainless steel, flat
Item No.: PO-3M0003 Manual spigot, short
Spigot for manual chucks with internal flushing hole. Individually packaged.
Item No.: PO-3M0004
Automatic spigot, long
Spigot for pneumatic chucks, suitable also for automatic exchange, with internal flushing hole. Individually packaged.
Item No.: PO-3M0005 Plastic part of spigots PO-3M0003 and PO-3M0004
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 50 -
Clamping systems compatible with 3-R
Item No.: PO-3M0037 Manual quick chuck D100 with base, clamping force 10 000N. Suitable for milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines...
Item No.: PO-3M0036
Manual quick chuck D100, clamping force 10 000N.
Suitable for lathe, milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines... .
Item No.: PO-3M0038
Manual quick chuck D100, clamping force 10 000N.
Item No.: PO-3M0033
D75 manual chuck, clamping force 10 000N.
Suitable for lathe, milling machines, machining centre, grinding machines, EDM wire cutters or EDM die-sinking machines...
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 51 -
Clamping systems compatible with 3-R
Item No.: PO-3M0034 D75 Manual chuck, clamping force 6000N. Suitable for milling machines and machining centre
Item No.: PO-3M0035 D75 Manual chuck, clamping force 6000N.
Item No.: PO-3M0046 70mm square manual chuck, clamping force 6000N.
Item No.: PO-3M0039 Pneumatic chuck D100, clamping force 10 000N.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 52 -
Item No.: PO-Q0018 Pneumatic switch for chucks control (CNC type)
Item No.: PO-Q0017 Pneumatic switch for chucks control (EDM type)
Clamping systems compatible with 3-R
Item No.: PO-3M0040 Pneumatic chuck D100 with base, clamping force 10 000N.
Item No.: PO-3M0041 Pneumatic chuck D100 with base, clamping force 10 000N.
Workholding plates with multiple pneumatic chucks, clamping force 10 000N.
Item No.: Model Dimens. mm Control
PO-3M0042 Workholding plate with 2 pneumatic chucks D100 300x102x105 2 chucks / 1 switch
PO-3M0043 Workholding plate with 3 pneumatic chucks D100 460x102x105 3 chucks / 1 switch
PO-3M0044 Workholding plate with 4 pneumatic chucks D100 330x290x105 4 chucks / 2 switches
PO-3M0045 Workholding plate with 6 pneumatic chucks D100 410x310x105 6 chucks / 2 switches
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 53 -
Clamping systems compatible with 3-R
Item No.: PO-M0001/3-R Precision stainless steel holder, with clamping hole for electrode shank 25x25mm PO-M0004/3-R Precision stainless steel holder, with clamping hole for electrode shank 15x15mm
Notice: Clamping spigot is not part of packaging
Copper electrodes blank
Item No. Shank Head Total length Packing
PO-R0004 15x15 mm
Shank length
32mm
20x20 mm 75 mm 10pcs
PO-R0005 25x25 mm 75 mm 10pcs
PO-R0006 30x30 mm 75 mm 10pcs
PO-R0007 35x35 mm 75 mm 10pcs
PO-R0008 40x40 mm 75 mm 10pcs
Item No. Shank Head Total length Packing
PO-R0009 25x25 mm
Shank length
40mm
30x30 mm 75 mm 10pcs
PO-R0010 30x30 mm 90 mm 10pcs
PO-R0011 40x40 mm 75 mm 10pcs
PO-R0012 40x40 mm 90 mm 10pcs
PO-R0013 50x50 mm 85 mm 10pcs
Item No. Dimensions Shank length Packing
PO-R0001 15x15x80 mm 32mm 20pcs/set
PO-R0002 25x25x75 mm 40mm 20pcs/set
PO-R0003 25x25x90 mm 40mm 20pcs/set
We can deliver the same blanks also from graphite
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 54 -
Clamping systems compatible with 3-R
Item No.: PO-3MV0001 Angle clamping unit for pallets and electrode holders compatible with 3-R
Item No.: PO-3MW0015 Angle electrode holder ITS50, with indexing by 1°, prismatic hole 15x15mm
Item No.: PO-F0006 Angle holder for electrodes Ø6mm with shank 15x15mm, angle setting 0-90° through the nonius
Precision square shank 15x15mm
for clamping of angle holder.
Fluently adjustable 0-90° through the nonius.
Clamping electrode diameter Ø6mm.
Possibility of connecting internal flushing
For simple clamping and angle setting of electrode; for example when
are channel inlets machining.
Fixation with hydraulic valve in the middle of rotation – fixing the position
without setting angle change.
Simple and quick angle setting allows planchet with indexing by 1°
Electrodes are clamped into the prismatic hole 15x15mm.
Scale 0-90°.
Rotation range 0-180°
Max. load capacity 5kg.
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 55 -
Clamping systems compatible with 3-R
Item No.: PO-3MV0004 Dividing device with manual chuck, tilting +90°/-10°, with fine tuning 360°
Item No.: 53210-04 Dividing device stainless steel with fine tuning 360°, with ER32 collets chuck. Possible to order also with ER20 or ER50 collets chuck. Clamping range Ø2,0- Ø34mm.
Item No.: 53210-08 Stainless dividing device with manual quick chuck, with fine tuning 360°
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 56 -
Clamping systems compatible with 3-R
Item No.: HCH-20 Hydraulic chuck for shaft Ø20mm
Item No.: PO-3M0009-1 Gauging pin 50x50mm, Φ40mm
Item No.: PO-3M0008 Parallel gauging pin 100x60mm
Notice: Clamping spigot is not part of packaging
Item No.: PO-3M0009 Gauging pin
Notice: Clamping spigot is not part of packaging
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 57 -
Clamping systems compatible with 3-R
Item No.: PO-3M0013 ER32 Collet holder, for collets ER32, D2 ~ D20
Notice: Clamping spigot is not part of packaging
Item No.: ER32-UM/62252-02/NH-ER32B Replacement nut of collet holder PO-M0003 for collets ER32
Item No.: 5975-3203-3220/62179-01 Set of high-precision collets ER32,18 pcs of collets capable clamping the diameters from Φ2 to Φ20mm, in a carry case + key. Also possible to order only single high-precision collet.
Item No.: 5976-02/62120-02 Mini collet chuck holder for collets ER16 with 20mm shank. Suitable for clamping of tube electrodes
Item No.: 5975-1601/62172-101 High precision collet ER16, Φ1-0,5mm 5975-1615/62172-102 High precision collet ER16, Φ1,5-1mm 5975-1602/62172-103 High precision collet ER16, Φ2-1mm 5975-1603/62172-104 High precision collet ER16, Φ3-2mm 5975-1604/62172-105 High-precision collet ER16, Φ4-3mm 5975-1605/62172-106 High-precision collet ER16, Φ5-4mm 5975-1606/62172-107 High-precision collet ER16, Φ6-5mm 5975-1607/62172-108 High-precision collet ER16, Φ7-6mm 5975-1608/62172-109 High-precision collet ER16, Φ8-7mm 5975-1609/62172-110 High-precision collet ER16, Φ9-8mm 5975-1610/62172-111 High-precision collet ER16, Φ10-9mm Item No.: C-ER16/0,1-0,5mm Seal for tube elect. 0,10-0,50mm for collets ER16 C-ER16/0,6-1,0mm Seal for tube elect. 0,60-1,00mm for collets ER16 C-ER16/1,1-1,5mm Seal for tube elect. 1,10-1,50mm for collets ER16 C-ER16/1,6-2,0mm Seal for tube elect. 1,60-2,00mm for collets ER16 C-ER16/2,1-2,5mm Seal for tube elect. 2,10-2,50mm for collets ER16 C-ER16/2,6-3,0mm Seal for tube elect. 2,60-3,00mm for collets ER16
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 58 -
Clamping systems compatible with 3-R
Centering sensors, with fixed sensing pin
Item No.: PO-3M0006-4 Centering sensors, with fixed sensing pin with ball 4mm PO-3M0006-5 Centering sensors, with fixed sensing pin with ball 5mm PO-3M0006 Centering sensors, with fixed sensing pin with ball 6mm PO-3M0006-8 Centering sensors, with fixed sensing pin with ball 8mm
Notice: Clamping spigot is not part of packaging
Replacement sensing pin for centering sensors PO-3M0006:
Item No.: RSP-0004 Replacement sensing pin with ball 4mm RSP-0005 Replacement sensing pin with ball 5mm RSP-0006 Replacement sensing pin with ball 6mm RSP-0008 Replacement sensing pin with ball 8mm
Centering sensors, with spring-loaded sensing pin
Item No.:
PO-3M0007-2 Centering sensors with spring-loaded sensing pin, with ball 2mm PO-3M0007-3 Centering sensors with spring-loaded sensing pin, with ball 3mm PO-3M0007-4 Centering sensors with spring-loaded sensing pin, with ball 4mm PO-3M0007-5 Centering sensors with spring-loaded sensing pin, with ball 5mm PO-3M0007-6 Centering sensors with spring-loaded sensing pin, with ball 6mm
Notice: Clamping spigot is not part of packaging Replacement sensing pin for spring-loaded centering sensors
PO-3M0007:
Item No.: RSLSP-0002 Replacement spring-loaded sensing pin with ball 2mm RSLSP-0003 Replacement spring-loaded sensing pin with ball 3mm RSLSP-0004 Replacement spring-loaded sensing pin with ball 4mm RSLSP-0005 Replacement spring-loaded sensing pin with ball 5mm RSLSP-0005 Replacement spring-loaded sensing pin with ball 6mm
79 m
m
Ø2, Ø3, Ø4, Ø5 mm Ø6 mm
85
mm
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 59 -
Clamping systems compatible with 3-R
Item No.: PO-P0001 Magnetic probe for working table of die sinking EDM, with ball 4mm PO-P0002-1 Magnetic probe for working table of die sinking EDM, with ball 5mm PO-P0002 Magnetic probe for working table of die sinking EDM, with ball 6mm PO-P0003 Magnetic probe for working table of die sinking EDM, with ball 8mm
Item No.: PO-3M0014
Adjusting chuck in X, Y, C axis
For square and round electrode clamping up to diameter Ø22mm Net weight 5kg, height 112mm
Item No.: PO-3M0010 Pre-setting checking workplace with manual quick chuck, compatible with 3-R
Item No.: PO-3M0011 Pre-setting checking workplace with pneumatic chuck, compatible with 3-R
ELERO, s.r.o. Tel.: 00421 42 4331991-2 Považská Teplá 28 Mobile: 00421 907 411 787 017 05 Považská Bystrica Fax/Tel.: 00421 42 4331990 Slovakia E-mail: [email protected] www.elero.sk
begining Erowa is registered trademark and brand name of company Erowa. Section: 9. System 3R is registered trademark and brand name of company System 3R. Page: - 60 -
Clamping systems compatible with 3-R
Item No.: PO-W0001/3-R 3D presetting and checking detector, with manual chuck compatible with 3-R
Item No.: PO-2080R Camera detector compatible with 3-R
We can offer many other components of our best-selling clamping systems at affordable prices. If you cannot find required clamping system, please see section The best-selling clamping system for electrode production for die-sinking EDM at affordable prices - palletisation compatible with EROW.A, where you can find more products. Almost all of them are available also for clamping systems compatible with 3-R.
10´´ 720P HD screen
Precision vision ±0,002mm
Zoom in 5-70 times
Focus distance 50-260mm
Cross mark (manual tuning)
Able to focus by manual tuning
Adjustable screen in 10-20°
Li Battery 4800mA
LED lighting