civil & tunneling - jennmar australia · mick baker email – [email protected] mobile –...
TRANSCRIPT
www.jennmar.com.au • +61 2 4648 75001
Mission stateMent
Jennmar Australia Pty. Ltd is a leader and innovator in the design and manufacture of roof and ground control systems for the mining, tunneling and construction industries.
We are dedicated to providing our customers with competitively priced, quality products and services and also to increase the productivity of our customers, whilst maintaining an environment:
• Which generates growth for our stockholders
• Where the commitment, skills and creativity of our employees can flourish and be rewarded
• Which provides for the safety and welfare of our employees
• Where we enhance our community
1
www.jennmar.com.au • +61 2 4648 75002
ContaCt Details
Manager - Civil & TunnelingMohamad KhalilEmail – [email protected] – 0427 209 641
Services – Civil and Tunneling
Metaliferous Mining ManagerAnthony DoddsEmail – [email protected] – 0427 488 442
Mt Isa Mine Service RepresentativeBill KingdomEmail – [email protected] – 0457 101 080
Orange Mine Service RepresentativeRichard ManningEmail – [email protected] – 0419 191 768
Geotechnical EngineerTrent RobertsEmail – [email protected] – 0409 033 184
VIC/NSW Mine Service RepresentativePeter GilbyEmail – [email protected] – 0409 033 680
Broken Hill Mine Service RepresentativeJarvis PettitEmail – [email protected] – 0427 775 133
WA (Perth) Branch ManagerMike AdamsEmail – [email protected] – 048227590
WA Mine Service RepresentativeJohn NestorovskiEmail – [email protected] – 0427 102 145
Perth Address :84 Furniss RdLandsdale, WA6065
Mine Services – Metaliferous (Hard Rock)
NSW Mine Service ManagerTim GaudryEmail – [email protected] – 0409 120 426
Northern NSW Mine Service RepresentativeTony SmithEmail – [email protected] – 0417 663 308
BHP Mine Service RepresentativeDanny MurrillEmail – [email protected] – 0418 828 344
Mining EngineerPeter CraigEmail – [email protected] – 0419 018 998
Mine Service & Product Development Rep.Brett GoodmanEmail – [email protected] – 0427 705 693
Western NSW Mine Service RepresentativePaul HolmesEmail – [email protected] – 0428 423 504
South Coast Mine Service RepresentativeMark BedfordEmail – [email protected] – 0437 771 781
Mine Services – New South Wales Coal
www.jennmar.com.au • +61 2 4648 75003
ContaCt Details
Queensland Technical ManagerJohn NaylorEmail – [email protected] – 0408 859 007
Mine Service RepresentativeGraeme NaylorEmail – [email protected] – 0419 194 480
Mine Service SupervisorHarold HintonEmail – [email protected] – 0427 229 669
Mine Service RepresentativeNeil CameronEmail – [email protected] – 0438 022 633
Mine Services - Queensland Coal
Manager – International SalesDave MartinEmail – [email protected] – 0409 072 202
International Sales
Technical Sales ManagerMatt RuddockEmail – [email protected] – 0427 056 447
Jennchem
Mine Service & Product Development Rep.Brett GoodmanEmail – [email protected] – 0427 705 693
Address :43 Wermol StKurri KurriNSW, 2327
Research & Development Centre
www.jennmar.com.au • +61 2 4648 75004
ContaCt Details
Cobar
Head Office and Plant40-44 Anzac AvenueSmeaton GrangeNSW 2567Phone (02) 4648 7500Fax (02) 4648 7555
Managing DirectorPeter RobertsEmail – [email protected] – 0418 687 371
National Commercial ManagerFernando GestoEmail – [email protected] – 0408 269 658
National Supply Chain ManagerPaul GreggEmail – [email protected] – 0447 771 475
Plant Manager NSWRod NorthEmail – [email protected] – 0408 209 156
National Quality ManagerArmand du PlessisEmail - [email protected] – 0417 905 046
WA (Perth) PlantMike AdamsEmail – [email protected] – 048227590
Queensland Plant48-50 Southgate DrivePaget, Mackay, QLD 4740Phone (07) 4952 8700Fax (07) 4952 8777
General Manager QueenslandTony SteainsEmail – [email protected] – 0438 445 099
Plant Manager QueenslandKeith CoburnEmail – [email protected] – 0408 605 546
National Safety and Environment ManagerMick BakerEmail – [email protected] – 0427 543 664
Manufacturing and Administration
www.jennmar.com.au • +61 2 4648 75006
Contents
RoCk bolTS & ACCeSSoRIeS
Jtech 25mm All Thread bar . . . . . . . . . . . . . . . . . . . 8
Jtech 20mm All Thread bar . . . . . . . . . . . . . . . . . . . 9
Aussie bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Python bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Friction lok . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
M24 Torque Tension . . . . . . . . . . . . . . . . . . . . . . . 13
Colour Coding Torque Tension bolts . . . . . . . . . . . 14
end Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CAble bolTS & ACCeSSoRIeS
TG bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Plain Superstrand . . . . . . . . . . . . . . . . . . . . . . . . . 18
bulbed Superstrand . . . . . . . . . . . . . . . . . . . . . . . 19
bowen Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
15 .2mm bulbed Cable . . . . . . . . . . . . . . . . . . . . . 21
15 .2 Cable with Grout Tube . . . . . . . . . . . . . . . . . 22
barrels and Wedges . . . . . . . . . . . . . . . . . . . . . . . 23
CIVIl eQUIPMeNT
Grade 75 All Thread Rebar . . . . . . . . . . . . . . . . . 25
Grade 75 All Thread Rebar Accessories . . . . . . . . 26
150 kSI All Thread bar . . . . . . . . . . . . . . . . . . . . . 27
150 kSI All Thread bar Accessories . . . . . . . . . . . . 28
Corrosion Protection . . . . . . . . . . . . . . . . . . . . . . . 29
Grout bonded MCP Anchors . . . . . . . . . . . . . . . . . 30
Grout bonded Multiple Corrosion Protection Anchors . . . . . . . . . . . . . . . . 31
Hydraulic Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . 32
NOTE: Please confirm that you have the latest version of this catalogue by visiting www.jennmar.com.au before using any of the technical specifications contained herein
www.jennmar.com.au • +61 2 4648 75008
ROC
K BO
LTS
& A
CC
ESSO
RIES
565 245
201
433
3.4
36 - 40
32 - 38
685
Typ
294
20%
DescriptionGeneral
Data
Yield Strength of steel
Tensile Strength of steel
Standard Elongation
Shear Strength (0.7 x UTS)
Bar Diameter (mm)
Cross sectional area (mm²)
Mass per metre (kg/m)
Drill Hole size Shredder (mm)
Drill Hole size Paddle (mm)
Bar Straightness to AS 1442 - 1991
500 215
182
260
15%
600
Min
Core 23mm Major 25mm
25mm BarProperties Minimum
25mm BarProperties Typical
MPa MPakN kN
Features• Lefthandthreadbar
• Suitableforusewitheitherresincapsulesorgrout
• Resinshredder*activelypromotesshreddingofthecapsulefilmandmixingoftheresincomponents
• Resinshredder*centralisestheboltwithintheboreholeandallowsuseinlargerdiameterholese.g.35mm
• Paddleresinmixingdeviceactivelypromotesresinmixingandanchorageinsmallerholediameters
• Finer6mmpitchthreadachieveshighertensionforagiventorque
• Availableinplainorhotdippedgalvanised(AS/NZS4680-1999)
• Dynamictestingdataavailableto36kJ
• Doublesheartestdataavailable
J-teCH ‘25MM tHreaD Bar’roCK Bolts
Varioustorqueratedshearpinbreak-outnutsavailableforuseonJ-Tech25mmbolts
*PatentPendingResinShredder
• Domenutdesignallowstheuseofastandard36mmA.F.tighteningspanner
• Hangernutsloadratedto2tonneavailablewiththread
• SuppliedwithKANGAPLATEwhichyield2tonnepriortoboltyield-systemdataavailable
• T38drivedollieavailableinanylength
www.jennmar.com.au • +61 2 4648 75009
ROC
K BO
LTS
& A
CC
ESSO
RIES
Features• 20mmLefthandthreadbar
• Suitableforusewitheitherresincapsulesorgrout
• Resinshredder*activelypromotesshreddingofthecapsulefilmandmixingoftheresincomponents
• Resinshredder*centralisestheboltwithintheboreholeandallowsuseinlargerdiameterholese.g.35mm
• Availableinplainorhotdippedgalvanised
• Domenutdesignallowstheuseofastandard36mmA.F.tighteningspanner
• Hangernutsloadratedto2Tonneavailablewiththread
• SuppliedwithKANGAPLATEandJ-LOKresin
• T38andhandhelddriveassembliesavailableinanylength
• PatentPendingShredder
J-teCH ‘20MM tHreaD Bar’
roCK Bolts
550 170
130
300
2.47
35 - 40
32 - 38
650
Typ
200
19%
Threadbar DescriptionGeneral
Data
Yield Strength of steel
Tensile Strength of steel
Standard Elongation
Shear Strength (0.7 x UTS)
Bar Diameter (mm)
Cross sectional area (mm²)
Mass per metre (kg/m)
Drill Hole size Shredder (mm)
Drill Hole size Paddle (mm)
Bar Straightness to AS 1442 - 1991
500 160
120
185
15%
600
Min
Core 19.5mm Major 25.5mm
20mm BarProperties Minimum
20mm BarProperties Typical
MPa MPakN kN
Varioustorqueratedshearpinbreak-outnutsavailableforuseonJ-Tech20mmbolts
www.jennmar.com.au • +61 2 4648 750010
ROC
K BO
LTS
& A
CC
ESSO
RIES
Features• Therockboltassemblyissuitableforhardrock
applications,tunnelingandminesespeciallywhereaggressivegroundcontaminantsarepresent.
• M24BoltJBXbarGr.650/890MPa.JXrockboltprofileprovidessuperiorloadtransfercharacteristicsusingtheunique‘J’barpattern
• TheAussieBoltisamechanicalpointanchored,pretensioned,postgroutablerockboltwithagroutinjectionnuthead.Allincorporatedinapolyethylenesleeve
• Theexpansionshellwillgivetheboltapreloadloadof12Tbeforegrouting
• Polyethyleneconvolutedtubingwitha2mmWallthickness–Giving50-100Yearcorrosionprotection
• Recommendedfordrillholesize45mmdiameter
• Handheldormechanicallydrivenassembliesavailableforinstallation
• ScrewedonGroutadaptorforhighpressuregroutingthrough67mmnuthead
Boltandaccessoriescanbesuppliedblackorgalvanised.Allstandardlengthsareavailableandanylengthcanbeproduceduponrequest.
aussie Bolt
roCK Bolts
General Data
HSAC840 Grade DescriptionX Grade M24 Bar
Properties MinimumX Grade M24 Bar
Properties Typical
MPaYield Strength of steel
Bar Diameter (mm)
Standard Elongation
Mass per metre (kg/m)
Drill hole size Plain (mm)
600
Core
Min
650
Major
Typ
228
21.7mm
15%
240
23.5mm
19%
3.00
27-29
380
45
41
306
223
335
245
840 920Tensile Strength of steel
Cross sectional area (mm²)
Drill hole diameter plain (mm)
Shear Strength (0.7 x UTS)
Outer Sheathing diameter (mm)
Bar Straightness to AS 1442-1991
MPakN kN
RockBoltwithDoubleCorrosionProtection
GroutAdaptor
InstallationDolly
www.jennmar.com.au • +61 2 4648 750011
ROC
K BO
LTS
& A
CC
ESSO
RIES
Features
• Suitableforcommoncivilandhardrockdrillholediameters
• Lengthsupto8m
• Completerangeoffaceplatestosuit
• Highpressureinjectionpumpsandaccessoriesareavailable.Newhighflowrateair/waterpump
• SpecificallydevelopedwaterinjectiondollietofitJumbomachinestoallowpercussioninstallationincollapsedholesandtheabilitytoslidethroughcentralisers
• Molecularattachmentwaterbasedcoatingthatdoesn’tcrackwhenboltisinflated.10xbetterthangalvanisinginsaltsprayandacidtesting
• PythonEyePATENTPENDINGallowsforeasierinsertionindamagedholes
• Specficallydesigneddollieandpythoneyeallowsforinstallationandinflationincollapseddrillholesandverypoorground
• Independenttestdataavailableforvaryingcoatingperformance
PYtHon Bolt
roCK Bolts
Minimum UTS (kN)
Feed Material %
SpecificationS Type
STANDARD
SUPER
MIDI
Tube Thinkness
(mm)
2
3
41
54
35 - 38 120 25
45 - 51 240 25
45 - 51 160 25542
Inflated Bolt Diameter
(mm)
Drill hole diameter
(mm)
Mass/metre
2 kg/m
2.8 kg/m
3.75 kg/m
STANDARD
MIDI
SUPER
www.jennmar.com.au • +61 2 4648 750012
ROC
K BO
LTS
& A
CC
ESSO
RIES
Features
• Theradialcompressionoftheslottedsteeltube
insideaboreholeprovidesbothradialandaxial
restrainttorockmovement.
• Canbepostgroutedforextracorrosion
protectionandsupportcapacity.
• Availableasblackorhotdippedgalvanised.
• 39mmfrictionlokdesignedtosuit47mmfriction
lokplates,requiringtheuseofoneplateonsite
FriCtion loK
roCK Bolts
Typical UTS (MPa)Diameter (mm) Pack Size
30033
30039
15047
Description General Data
33mm Friction Lok Properties Minimum
33mm Friction Lok Properties Typical
MPa
Yield strength of steel
Cross Sectional Area (mm²)
415 51080 100
204
1.53
30-32
100 120510 610Tensile strength of steel
Mass per metre (kg/m)
Drill Hole size (mm)
MPakN kN
Description General Data
39mm Friction Lok Properties Minimum
39mm Friction Lok Properties Typical
MPa
Yield strength of steel
Cross Sectional Area (mm²)
415 51090 115
225
1.77
35-38
115 135510 610Tensile strength of steel
Mass per metre (kg/m)
Drill Hole size (mm)
MPakN kN
Description General Data
47mm Friction Lok Properties Minimum
47mm Friction Lok Properties Typical
MPa
Yield strength of steel
Cross Sectional Area (mm²)
345 445120 160
355
2.79
42.1-45
165 180460 510Tensile strength of steel
Mass per metre (kg/m)
Drill Hole size (mm)
MPakN kN
www.jennmar.com.au • +61 2 4648 750013
ROC
K BO
LTS
& A
CC
ESSO
RIES
Features• The“X”gradesteelusedbyJennmarhassuperior
toughnessandductilitythroughtheuseofgrainrefiningalloys.TheJennmar“X”gradeboltsshouldprovidebetterperformanceinmineswhereStressCorrosionCrackingisevidentandalsoinareasofhighlocalisedhorizontalstresses.
• TheJXrockboltprofileprovidessuperiorloadtransfercharacteristicsusingtheunique“J”barpattern.
• Recommendedfordrillholesizes27–28mmdiameterwithoutmixingdevicesor35-40mmwithresinmixingdevices
• M24couplers,33mmdiameterareavailableforusewithtorquetensionbolts
• Variousrollpinbreak-outtorquerangesavailable
• Availableasgalvanised
• Lefthandthreadrequiredforhardrockinstallation
M24 torque tensionroCK Bolts
JB rib profile
J rib profile
General Data
HSAC840 Grade DescriptionX Grade M24 Bar
Properties MinimumX Grade M24 Bar
Properties Typical
MPaYield Strength of steel
Bar Diameter (mm)
Standard Elongation
Mass per metre (kg/m)
Drill hole size Plain (mm)
600
Core
Min
650
Major
Typ
228
21.7mm
15%
240
23.5mm
19%
3.00
27-29
380
32-38
35-40
306
223
335
245
840 920Tensile Strength of steel
Cross sectional area (mm²)
Drill hole size Paddle (mm)
Shear Strength (0.7 x UTS)
Drill Hole size Shredder (mm)
Bar Straightness to AS 1442-1991
MPakN kN
General Data
300 Grade DescriptionJBS Grade M24 Bar
Properties MinimumJBS Grade M24 Bar Properties Typical
MPaYield Strength of steel
Bar Diameter (mm)
Standard Elongation
300
Core
Min
340
Major
Typ
110
21.7mm
22%
126
23.5mm
27%
380
161
113
182
127
440 490Tensile Strength of steel
Cross sectional area (mm²)
Shear Strength (0.7 x UTS)
MPakN kN
Various torque rated shear pin break-out nuts available for use on M24 bolts
www.jennmar.com.au • +61 2 4648 750014
ROC
K BO
LTS
& A
CC
ESSO
RIES
Colour CoDing
torque tension Bolts
roCK Bolts
Note:PlasticbagscoveringthreadsarealsocolourcodedtoGrade
Bolt Length (mm) Colour
Up to 900
925 - 1200
2200
925 - 1200
1225 - 1500
1525 - 1800
1825 - 2100
2125 - 2400
2425 - 2700
Grade Colour
Mild Steel “S” ALL BS BAR TO HAVE A BLUE STRIPE PAINTED ON THEM
ALL CRATES/BUNDLES TO HAVE A RED STRIPE
PAINTED ON THEMExtra High Tensile “X”
Pin LocationColour
C Pin (production) NEXT TO GRADE
NUT + BAR FROM NUT TO YELLOW STRIPE
C Pin (Test Bolts)
Length LocationColour
1100MM JSD 2200MM M24
NEXT TO GRADE
www.jennmar.com.au • +61 2 4648 750015
ROC
K BO
LTS
& A
CC
ESSO
RIES
enD Fittings
roCK Bolts
Note: 1 ft.lb = 1.36 N.m
Features• PlainNuts,DomeBallsandPlasNutsareavailableasGalvanised
Productcode“G”addedtoendofpartnumber
• Nutsandwashersarepackaged50per4lbucket
Parts list
Part Number
Nuts
Washers
Expansion Shells
Resin Shredder
Shotcrete Depth
Description Application
NUTRM24H125DM Plain M24 class 8 nut, 30mm high
Plain ¾” UNC class 8 nut, 25mm high
Galvanised M24 class 8 nut, 30mm high
Dome Ball, 51mm O.D., 24mm I.D.
Galvanised dome Ball, 51mm O.D., 24mm I.D.
Flat hardened steel washer, 65mm O.D., 25mm I.D.
Flat steel washer, 48mm O.D, 25mm I.D
White teflon anti friction washer M24
D10L 2-leaf expansion shell, 3/4” UNC thread
M24 Right hand thread 3 leaf expansion shell
M20 Right hand thread 3 leaf expansion shell
M16 Right hand thread 2 leaf expansion shell
Resin Shredder
Shotcrete Depth Indicator
Spare molycoated nuts for hanging brackets or floor bolting
Spare nuts for hanging brackets
Spare nuts galvanised bolts
Used on roof bolts with volcano plates
Used on galvanised roof bolts with volcano plates
Conventional Bolts – 35mm drill hole
For 24mm eye bolts, L Pins and hanger bolts
For 20mm eye bolts, L Pins
For 16mm eye bolts, L Pins
Prevent gloving and ensure resin mixing
Provide QA/QC for easy application and control of fibrecrete depth
Used on ¾” bolts
Used on M24 bolts
Used on M24 Bolts
NUT34H1D
NUTRM24H125DGAL
WASHM24DB
WASHM24DBG
WASH25MML
WASH25MM
WASHM24
EXPD10L
ES2443RHT
ES2036RHT
ES1628RHT
S
IW – White = 3.0m BoltIY – Yellow = 2.4m Bolt
www.jennmar.com.au • +61 2 4648 750017
CA
BLE
BOLT
S
Features• Veryhighstrengthsteelwirestrand,with
metallurgyaimedatresistingstresscorrosion
cracking
• Canbesuppliedwithbarrelandwedgefor
immediatepassivesupport
• Flexiblecentralsteelhollowtube14mmin
diameterforgroutinjection
• Corrosionprotectedcentralhollowtube
• Birdcagedtopsectionforresinanchoring
• Provenbarrelandwedgesystem,withadded
corrosionprotection
• Tensionedupto30tonne
• Typicallengthsheldinstockinclude4,6&8
metre–butcanbemadetoorder
• Installationintodrillholesrangingfrom38–45mmdiametertoachieveVERYHIGHLOADTRANSFER.
• Groutadaptorwithlockingbayonetfittingforfast,easy&safeattachment
• AnchoredwithJ-LOK“Post-Grout”resincapsulesformixinginlargerdrillholes.
• Specialhighcapacityvolcanoplateswithgroutindicatorholesareavailableinvarioussizes
• Canbeorderedasapackcompletewith
plates,resinandgrout
tg Bolt
CABLE BoLts
Elongation at Strand Failure
Typical Strand Yield Strength
5 - 7%560kN
Strand Diameter
28mm
Strand Strand at B&W
Typical Breaking Load
620kN (63 Tonne)
540kN (55 Tonne)
www.jennmar.com.au • +61 2 4648 750018
CA
BLE
BOLT
S
Features• Flexible,easytohandleevenaroundthetight
workingareasofboltingrigs.
• Tensionersareavailabletopre-tensionthe
SuperStrandupto27tonne.
• Installedinaregular35mmdrillhole.
• Typicallengthsheldinstockinclude4,6&8
metre–butcanbemadetoorder
• Specialpackagingisavailabletosuitthelengths
orderedandforthetransportsystemusedatthe
minesite.
• Driveendsarepainted/colourcodedtolength
• Canbesupplieddebonded
Plain suPerstranD
CABLE BoLts
Elongation at Strand Failure
Typical Strand Yield Strength
6 - 7%525kN (53 Tonne)
Strand Diameter
No. of Wires Steel Area
21.8mm 19 313mm2 52 Tonne
Strand Strand at B&W
Typical Breaking Load
590kN (60 Tonne)
Typical Applications• PlainSuperStrandofanylengthcanbereadilyinstalledwithhandheldboltersasapoint
anchored,pre-tensionedsupport.
• The4mSuperStrandcanbe“fullyencapsulated”withresininstalledalongsideprimarysupportattheface.Installationtimebetween6–8minutes
• Throughpillarsupportcanachieve27tonneofclampingpressure
• Recommendedplatethicknessisaminimum12mm
www.jennmar.com.au • +61 2 4648 750019
CA
BLE
BOLT
S
Features• TheflexibleSuperStrandandtensioningsystem
allowsinstallationofftheJumboorIT.Installationtimesaslowas10minutesforan8mBulbedSuperStrandarepossibledependingonpre-drilledholecondition.
• Highstrengthplatesareusedwithgrout&breathertubeslotsin45mmholes
• Installedwithhandheldbolters,asa1mresincapsuleprovidestheanchorage
• AnchoredwithJ-LOK“Post-Grout”resincapsulesformixinginlargedrillholes
• Tensionersareavailableforupto27tonnespre-tension
• Canbepostgroutedbyeither“bottom-up”or“top-down”methodsdependingonthedrillholediameter.
• Specialpackagingisavailabletosuitthelengthsorderedandforthetransportsystemusedattheminesite.
• Fullybulbedcableoptionsavailable
BulBeD suPerstranD
CABLE BoLts
Elongation at Strand Failure
Typical Strand Yield Strength
30%525kN (53 Tonne)
Strand Diameter
No. of Wires Steel Area
21.8mm 19 313mm2 12
Strand Strand at B&W
Typical Breaking Load
590kN (60 Tonne)
Drill Hole Diameter (mm)
Bulb Diameter (mm)
3542 - 4552 - 55
323848
Characterisedtypicallyby3bulbsinthetopsectionoftheSuperStrandwhichprovidesforresinanchorageinlargersizeddrillhole.ThelargersizeddrillholesallowfortubesforpostgroutingoftheSuperStrandafterpointanchoringbyresinandpre-tensioning.
www.jennmar.com.au • +61 2 4648 750020
CA
BLE
BOLT
SFeatures• Groutedbulbedsectionproduceshighbond
strengthtotherock.
• AnchoredwithJ-LOK“Post–Grout”resincapsulesformixingin45mmdrillholesorgrout
• Specialhighstrengthplatesareusedwithadditionalgrout&breathertubeslots.
• CanbeeasilyinstalledofftheITusingafishhookandgroutfor50tonnesinglestrandsupport
• Canbetensionedupto25tonnes
• Specialpackagingisavailabletosuitthelengths
orderedandforthetransportsystemusedatthe
minesite.Thismayincludeplatesandbarrels&
wedges.
• TheBowencableisbottom-upgroutedusing
speciallydevelopedholeseals.
BoWen CaBle
CABLE BoLts
Characterisedbynon-collapsiblebulbsevery500mmdownthegroutedlengthoftheSuperStrand,whichareasmallerdiameterthanthetopresinanchoragebulbs.Thebreathertubeispermanentlyfixedtothecablewithmetalties.Theboltfeaturesaresinretentionwasherwhichcanbeplacedonthecableatanypositionwhichoptimisesanchorage.
Elongation at Strand Failure
Typical Strand Yield Strength
6 -7%525kN (53 Tonne)
Strand Diameter
No. of Wires Steel Area
21.8mm 19 313mm2 45 Tonne*
Strand Strand at non-collapsible bulb
Typical Breaking Load
590kN (60 Tonne)
*45tonnebreakingloadifthecableisonlypointanchored¬grouted.
Drill Hole Diameter (mm)
“Top” Bulb Diameter (mm)
“Bottom” Bulb Diameter (mm)
42 - 45 38 32
www.jennmar.com.au • +61 2 4648 750021
CA
BLE
BOLT
S
Features• Traditionalsecondarysupportthroughout
AustralianMines.
• Normallyusedwithcementitiousgrout,using
“bottomup”groutingtechniques.
• Cablesarefittedwitha“FishHook”arrangement
toholdthecableuptheholepriortogrouting.
• Suppliedincablereelsinvaryinglengthsofblack
orgalvanised
• Smallerdiametercablesallowforeaseofjoining/
bendingtoformtrussarrangements.
• Cablesarecoiledforeaseoftransport
underground
• Lengthsareavailableupto15m
• Availableascontinuouslybulbedreelsfor
Cabolters
• Canbesuppliedwithdebondedlengths
15.2mm BulBeD CaBle
CABLE BoLts
GARFORD15.2mmTwin-strandarenormallybulbedandconfiguredascableboltswithasingletailforplating,orasatrusswithtwotailsforformingasling.
General Data
Min
Description
Yield Strength of steel
Cross sectional area (mm²)
Tensile Strength of steel
Mass per metre (kg/m)
Standard Elongation
Drill Hole size (mm)
MPa MPakN kN
15.2mm Cable Properties Minimum
15.2mm Cable Properties Typical
Min
250212
143
2651850250
113
6.5%Typ3.5%
35-51
www.jennmar.com.au • +61 2 4648 750022
CA
BLE
BOLT
S
Features• ATwin-strand15.2mmcablewithgrouttube
attached
• Lowcostsupport
• Suppliedcompletereadyforinstallationandgrouting
• Lengthsareavailableupto15m.
• Configuredwithgroutorbreathertubefullyassembled
• TraditionalsecondarysupportthroughoutAustralianMines
• AvailableascontinuouslybulbedreelsforCabolters
• Stress-relievedlowrelaxationcablehighstrengthcable
• Normallyusedwithcementitiousgrout,using“bottomup”groutingtechniques
• Cablesarefittedwitha“FishHook”arrangementtoholdthecableuptheholepriortogrouting
• Smallerdiametercablesallowforeaseofjoining/bendingtoformtrussarrangement
• Cablesarecoiledforeaseoftransportunderground
15.2mm CaBle WitH grout tuBe
CABLE BoLts
GARFORD15.2mmTwin-strandarenormallybulbedandconfiguredascableboltswithasingletailforplating,orasatrusswithtwotailsforformingasling.
143
113
35 - 51
Typ
1850
250
6.5%
265
Strand Diameter
General Data
Yield Strength of steel
Standard Elongation
Mass per metre (kg/m)
Tensile Strength of steel
Cross sectional area (mm²)
Drill Hole size (mm)
MPa kN
15.2 Cable Properties Minimum
15.2 Cable Properties Typical
kNMPa
Min
212
3.5%
250
Drill hole size varies depending on single, double or triple strand applications
www.jennmar.com.au • +61 2 4648 750023
CA
BLE
BOLT
S
Features• DomedBarrels&Wedgesin28mm,21.8mm&
15.2mmareusedwithvolcanoplatestoachieve
installationanglesofupto18degrees.
• FlatBarrelsandWedgesinboth21.8mm&
15.2mmareusedonflatplatesoncablebolts
andwithtensionblocksontrusses.
• AllBarrelsandWedgeshaveanoilfilmcoating
andarepackagedinstrong4litrebucketsfor
corrosionprotection.
• Anti-corrosionphosphatecoatingsonbarrelsare
availableforlongerterminstallations
• AllBarrelsandWedgesMUSTbepretensioned
toaminimum8tonnestoensurethewedgeteeth
penetratethestrandtoachievemaximumload
capacity.
Barrel & WeDges
CABLE BoLts
Qty/bucketOuter Diameter (mm)
42
58
65
20
10
10
Applicable Strand Diameter
Length (mm)
15.2
21.8
28
44
60
70
26
CIV
Il e
QU
IPM
eNT
graDe 75 all tHreaD reBar aCCessories
CIVIL EQUIPMENt
www.jennmar.com.au•+61 2 4648 7500
28
CIV
Il e
QU
IPM
eNT
150 Ksi all tHreaD Bar aCCessories
CIVIL EQUIPMENt
www.jennmar.com.au•+61 2 4648 7500
31
CIV
Il e
QU
IPM
eNT
grout BonDeD MultiPle Corrosion ProteCtion anCHors
CIVIL EQUIPMENt
www.jennmar.com.au•+61 2 4648 7500