citroen c5 (2008 - 2011) mki + ck (en_us).pdf
TRANSCRIPT
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
C5
Installation manual: Parrot MKi + Parrot CK3100 range
The brand name CITROËN C5 and the CITROËN logo are the property of CITROËN AUTOMOBILES. This document is only valid for the vehicle model C5® year 2008 to 2011, excluding all other models in the same range and excluding later modifications made to the vehicle by the manufacturer. The Parrot brand name and logos are the exclusive property of Parrot SA.
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Accessories required
Disassembly 20min
Kit installation 30min
Refitting 20min
Testing 15min
Total 1h25min
YES ACC wire
NO ISO
YES UNIKA
FRONT SPEAKER TEL mode
ALL MUSIC mode
Fitting time / Main features
Tools
- TORX screwdriver
- Multimeter or Test lamp
- Hose clamp
- Electrical tape
- Round file (or a knife)
Kram ref. Dealer ref.
CK range 86 165 9706AP
MKi range 84744 9706AT
Photos not contractually binding
CK range MKi range
Updating
Plastic trim removal tools FACOM / BERNER
FACOM Sleeve DX-25 (n°4 spanners)
To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at
www.parrot.com/usa/support/downloads
“Quick Connect harness references available at http://certified.parrot.com/faisceaux_US.php"
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Disassembly
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Disassembly 1 / 2
Insert the removal tools into the slots on each side of the radio.
Unclip, pull and lift the radio disconnecting the antenna
connector.
Using the plastic trim tools, unclip and remove the centre console
panel. (Do not disconnect it)
Using the plastic trim tools, unclip the dashboard panel.
1
3
2
4
5 6
Remove screw 1. Followed by screws 2 and 3.
1
2 3
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Disassembly 2 / 2
Using the plastic trim removal tools, unclip the dashboard panel by pulling
firmly upwards, then unplug the connectors.
Using the plastic trim tools, unclip the clip located on the left side of
the dashboard.
Open the storage compartment to the left under the steering
wheel.
Push the tabs in and unclip the storage compartment.
7
9
8
10
11
Remove the door seal on the driver’s side.
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Using the plastic trim tools, run the cable along the side of the panel towards the windscreen.
Microphone feeding 1 / 2
Glue the bracket (supplied) to the left of the cabin light panel, after
cleaning the surface.
Using the plastic trim tools, run the cable under the headliner
towards the driver's side windscreen post.
Run the cable replacing the seal on the driver's side door.
1
3
2
4
5 6
Pass the cable into the dashboard on the left side.
Run the cable under the steering wheel and attach with wire ties.
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Microphone feeding 2 / 2
Run the cable towards the centre console .
7
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Feeding the accessory cable
Using a guide, feed the cable through the hole towards the
centre console.
Be careful to leave enough length.
1 2
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
ISO adapter
Fitting the hands-free system 1 / 2
Connect the adaptor (86165/9706AP for the CK or the 84744/9706AT for the Mki) to the
original connector. Connect all of the wires to the blue box as shown in the diagram below.
Test before reinstalling then slide the assembly into the bottom housing of the central console.
(Located under the storage compartment.)
1
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Fitting the hands-free system 2 / 2
Pass the cable through the display hole towards the radio.
Stick the screen bracket to the top left corner of the dashboard, after
carefully cleaning the surface.
Clip the dashboard panel back on by reconnecting the connectors. (Make sure that you DO NOT cut
the cable.)
2
4
3
!
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Testing
Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob
of the remote control, check:
1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click in the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition, check that the kit switches off and that the "goodbye" message appears on the screen. (If this fails, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit and make a call. (Check that both the microphone and the kit are working.)
C5
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually binding.
Reassembly
Refit the system using the following procedure: 1 – Re-place screws 1, 2 and 3 in the dashboard panel and clip the strip back on. 2 - Clip the centre console cover back on. 3 – Re-install the radio reconnecting the adaptor and the antenna. 4 – Re-fit the storage compartment under the steering wheel. 5 – Re-fit the panel on the left-hand side of the dashboard.