citacie2011147.213.194.5/documents/1-695-citacie2011.pdf · 2013. 3. 26. · 2011 Šalak, a. -...

2011 ŠALAK, A. - MIŠKOVI Č, V. - DUDROVÁ, E. - RUDNAYOVÁ, E. : The Dependence of Mechanical Properties of Sintered Iron Compacts upon Porosity. Powder Metallurgy International, 6, 1974, s.128-132

Scopus: LIN, S. - FENG, D. - SHI, Q.: Advanced Materials Research, 2011, vol.160-162, 915-920 Scopus: LIN, S. - WANG, S.: Advanced Materials Research, 2011, vol.311-313, 84-87

PARILÁK, Ľ. - ŠLESÁR, M. - ŠTEFAN, B.: Structural Prediction of Mechanical Properties of HSLA Steels. In: Microalloyed HSLA Steels. Proceedings of Microalloying '88. Chicago, 24.-30.9.1988, s.559-569

Dom.iné: EVIN, E.: Acta Mechanica, 15, 2011, 2, p. 42-49 JANOVEC, J. - GUTH, A. - VÝROSTKOVÁ, A. - ŠTEFAN, B.: Premeny karbidických fáz pri popúšťaní ocele 2,7Cr-0,6Mo-0,3V. Kovové materiály, 26, 1988, 6, s.714-724

Zahr.WOS: SLUGEN, V.: Safety of VVER-440 reactors: barriers against fission products release. Springer, 2011, p. 1-173

ŠAJGALÍK, P. - DUSZA, J.: Reinforcement of Silicon Nitride Ceramics by Beta-Si3N4 Whiskers. Journal of the European Ceramic Society, 5, 1989, s.321-326

Zahr.WOS: PARAMSOTHY, M., CHAN, J., KWOK, R., GUPTA: Composites Part A, vol. 42, 2011, no. 12, p. 2093-2100

Zahr.WOS: YANG, L. - LI, J. - WANG, R.: Key Engineering Materials, 2011, vol.474-476, 1881-1886 Zahr.WOS: PARAMSOTHY, M., CHAN, J., KWOK, R., GUPTA, M.: Materials Science and Engineering A,

vol. 528, 2011, no. 21, p. 6545-6551 KOVÁ Č, F. - SIWECKI, T. - HUTCHINSON, W.B. - ZAJAC, S.: Finishing Conditions Appropriate for Recrystallization-Controlled Rolling of Ti-V-N-Steel. Metallurgical Transactions A, 23, 1992, s.373-375

Zahr.WOS: SUN, Q., XU, C.: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, vol.18, no., 452-458

BESTERCI, M. - ŠLESÁR, M. - JANGG, G.: Structure and Properties of Dispersion Hardened Al-Al4C3 Materials. Powder Metallurgy International, 24, 1992, 1, s.27-32

Zahr.WOS: DERAKHSHANDEH, HR., JAHROMI, AJ.: MATERIALS and DESIGN, 2011, vol.32, no.6, 3377-3388

BALÁŽ, P. - BRIANČIN, J. - ŠEPELÁK, V. - HAVLÍK, T. - ŠKROBIAN, M.: Non-Oxidative Leaching of Mechanically Activated Stibnite. Hydrometallurgy, 31, 1992, s.201-212

Zahr.WOS: YANG, J.-G. - TANG, C.-B. - CHEN, Y.-M. - TANG, M.-T.: Metallurgical and Materials Transactions B, 2011, vol.42, no.1, 30-36

Scopus: YANG, J.-G. - TANG, C.-B. - CHEN, Y.-M. - HE, J. - TANG, M.-T.: TMS Annual Meeting, 2011, vol.3, 749-756

KUPKOVÁ, M. : Porosity Dependence of Material Elastic Moduli. Journal of Materials Science, 28, 1993, s.5265-5268

Zahr.WOS: IQBAL, G., KANG, B.: JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2011, vol.8, no.5

MAGULA, V. - JANOVEC, J.: Effect of Short Time High Temperature Annealing on Kinetics of Carbidic Reactions in 2,7Cr-0,6Mo-0,3V Steel. Ironmaking and Steelmaking, 21, 1994, 3, s.223-228

Zahr.WOS: SLUGEN, V.: Safety of VVER-440 reactors: barriers against fission products release. Springer, 2011, p. 1-173

ŠALAK, A. : Ferrous Powder Metallurgy. Cambridge, Cambridge International Science Publishing 1995, 410 s.

Zahr.WOS: GHERMEC, C., GHERMEC, O., TROTEA, M.: Materials Science Forum, vol. 672, 2011, p. 113-116

Zahr.WOS: MOMENI, M., GIERL, C., DANNINGER, H.: Materials Chemistry and Physics, vol. 129, 2011, p. 209-216

Zahr.WOS: SHAIBANI, M.E., GHAMBARI, M.: Powder Technology, vol. 212, 2011, p. 278-283

Zahr.WOS: BIDULSKÁ, J., KVAČKAJ, T., KOČIŠKO, R., BIDULSKÝ, R., ACTIS GRANDE, M.: Materials Science Forum, vol. 667-669, 2011, p. 535-540

ŠEVC, P. - JANOVEC, J. - KOUTNÍK, M. - VÝROSTKOVÁ, A. : Equilibrium Grain Boundary Segregation of Phosphorus in 2,6Cr-0,7Mo-0,3V Steels. Acta Metallurgica et Materialia, 43, 1995, 1, s.251-258

Zahr.WOS: WANG, K., SI, H., YANG, C., XU, T., SHAO, C., CHEN, X.: MATERIALS LETTERS, 2011, vol.65, no.11, 1639-1641

Zahr.WOS: CHEN, XM., SONG, SH., WENG, LQ., LIU, SJ., WANG, K.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.28, 8299-8304

SELECKÁ, M. - ŠALAK, A. - DUDROVÁ, E.: Microstructure of Fe-B and FeNiMo-B Materials Sintered in Different Atmospheres. Metalurgia proszków, 28, 1995, 1/2, s.21-25

Zahr.WOS: KARWAN-BACZEWSKA, J.: Archives of Metallurgy and Materials, vol. 56, 2011, no. 3, p. 789-796

LOFAJ, F. - KAGANOVSKIJ, Yu.S.: Kinetics of WC-Co Oxidation Accompanied by Swelling. Journal of Materials Science, 30, 1995, s.1811-1817

Scopus: XU, YC. - CHEN, KH. - WANG, SQ. - ZHU, CJ. - XIE, CQ. - CHEN, XM.: Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2011, vol.16, no.3, 425-430

Zahr.WOS: ARISTIZABAL, M. - SANCHEZ, J. M. - RODRIGUEZ, N. - IBARRETA, F. - MARTINEZ, R.: CORROSION SCIENCE, 2011, vol.53, no.9, 2754-2760

Scopus: ZHU, C.-J. - CHEN, K.-H. - WANG, S.-Q. - XU, Y.-C. - XIE, C.-Q. - CHEN, X.-M.: Journal of Central South University (Science and Technology), 2011, vol.42, no.10, 2984-2989

ŠAJGALÍK, P. - DUSZA, J. - HOFFMANN, M.J.: Relationship between Microstructure Toughening Mechanisms and Fracture Toughness of Reinforced Beta-Si3N4 Ceramics. Journal of the American Ceramic Society, 78, 1995, 10, s.2619-2624

Zahr.WOS: WU, P., ZHENG, Y., ZHAO, Y., YU, H.: MATERIALS and DESIGN, 2011, vol.32, no.2, 951-956 ŠEVC, P. - JANOVEC, J. - LUCAS, M. - GRABKE, H.J.: Kinetics of Phosphorus Segregation in 2,7Cr-0,7Mo-0,3V Steels with Different Phosphorus Contents. Steel Research, 66, 1995, 12, s.537-542

Zahr.WOS: YANG, MING - NIE, YUJING: ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, PTS 1-2, 2011, vol.181-182, no., 861-865

Zahr.WOS: WANG, KAI - SI, HONG - YANG, CHUN - XU, TING-DONG: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, vol.18, no.1, 61-67

VÝROSTKOVÁ, A. - KROUPA, A. - JANOVEC, J. - SVOBODA, M.: Carbide Reactions and Phase Equilibria in Low Alloy Cr-Mo-V Steels Tempered at 773-993 K. Part I: Experimental Measurements. Acta Materialia, 46, 1998, 1, s.31-38

Zahr.WOS: CHENG, WC., HWANG, SM.: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, vol.42A, no.7, 1760-1766

Zahr.WOS: DAI, Y.M. - MA, Y.Q.: Advanced Materials Research, 2011, vol.194-196, 271-274 KROUPA, A. - VÝROSTKOVÁ, A. - SVOBODA, M. - JANOVEC, J.: Carbide Reactions and Phase Equilibria in Low Alloy Cr-Mo-V Steels Tempered at 773-993 K. Part II: Theoretical Calculations. Acta Materialia, 46, 1998, 1, s.39-49

Scopus: DAI, Y.M. - MA, Y.Q.: Advanced Materials Research, 2011, vol.194-196, 271-274 Zahr.WOS: GANESH, BJ., RAJU, S., RAI, AK., VIJAYALAKSHMI, M.: TRANSACTIONS OF THE INDIAN

INSTITUTE OF METALS, 2011, vol.64, no.1-2, 93-97 Zahr.WOS: DAI, Y.M. - MA, Y.Q.: Advanced Materials Research, 2011, vol.194-196, 271-274

JANOVEC, J. - SVOBODA, M. - BLACH, J. : Evolution of Secondary Phases during Quenching and Tempering 12% Cr Steel. Materials Science and Engineering A, 249, 1998, s.184-189

Zahr.WOS: LIU, C., ZHANG, D., LIU, Y., WANG, Q., YAN, Z.: Nuclear Engineering and Design, 241, 2011, s. 2411-2415

Zahr.iné: LIU, C., LIU, Y., ZHANG, D., DONG, X., NING, B., YAN, Z.: Advanced Materials Research, vol. 299-300, 2011, p. 61-64

Zahr.WOS: NOVINROOZ, A., MONIRI, S., ASADABAD, MA., HOJABRI, A.: Metal Science and Heat Treatment, vol. 53, 2011, no. 5/6, p. 205-209

Zahr.WOS: LIU, C. LIU, Y., ZHANG, D., NING, B., YAN, Z.: STEEL RESEARCH INTERNATIONAL, 2011, vol.82, no.12, 1362-1367

Zahr.iné: GOLAŇSKI, G.: Metal 2011. Brno, 18.-20.5.2011, CD ROM Dom.iné: SCHMIDOVÁ, E., HANUS, P.: Materials Engineering-Materiálové inžinierstvo, 18, 2011, s. 79-84 Zahr.WOS: MAYR, P., HOLZER, I., CERJAK, H.: WELDING IN THE WORLD, 2011, vol.55, no.5-6, 70-77 Zahr.WOS: DONG, J. - SHIN, K. - KIM, K.-C. - KIM, B.-H.: Advanced Science Letters, 2011, vol.4, no.6-7,

2555-2559 Zahr.WOS: XING, S., CHEN, Z., MA, Y.: ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, vol.146-147,

no., 635-640 Scopus: GOLAŃSKI, G.: Archives of Materials Science and Engineering, 2011, vol.48, no.1, 12-18

KULU, P. - TÜMANOK, A. - MIKLI, V. - KÄERDI, H. - KOHÚTEK, I. - BESTERCI, M. : Possibilities of Evaluation of Powder Particle Granulometry and Morphology by Image Analysis. Proc. Estonian Acad. Sci. Engng., 4, 1998, 1, s.3-17

Zahr.WOS: ARUNIIT, A., KERS, J., GOLJANDIN, D., SAARNA, M., TALL, K., MAJAK, J., HERRANEN, H.: Materials Science-Medziagotyra, vol. 17, 2011, no. 3, p. 276-281

ZÁHUMENSKÝ, P. - TULEJA, S. - ORSZÁGHOVÁ, J. - JANOVEC, J. - HOMOLOVÁ, V. : Corrosion Resistance of 18Cr-12Ni-2,5Mo Steel Annealed at 500-1050oC. Corrosion Science, 41, 1999, s.1305-1322

Zahr.WOS: LEIVA-GARCIA, R. - MUNOZ-PORTERO, M. J. - GARCIA-ANTON, J.: INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2011, vol.6, no.2, 442-460

CARRUTH, M. - BAXTER, D. - DUSZA, J.: Strength Degradation of Si3N4 Exposed to Simulated Gas Turbine Environments. Journal of Materials Science, 34, 1999, s.4501-4509

Zahr.WOS: KE, K. - WEN, R. - WANG, Y. - YANG, W. - XIE, B.-H. - YANG, M.-B.: Journal of Materials Science, 2011, vol.46, no.5, 1542-1550

BESTERCI, M. - IVAN, J. - KOVÁ Č, L. - WEISSGÄRBER, T. - SAUER, C.: Strain and Fracture Mechanism of Cu-TiC. Materials Letters, 38, 1999, s.270 - 274

Zahr.WOS: YUAN, Y., IWAI, K., WANG, Q., MATSUZAKI, T., WANG, K., HE, J.: ISIJ INTERNATIONAL, 2011, vol.51, no.11, 1819-1824

SELECKÁ, M. - ŠALAK, A. : Durability and Failure of Powder Forged Rolling Bearing Rings. Wear, 236, 1999, s.47-54

Zahr.WOS: MATSUNAGA, H. - SHOMURA, N. - MURAMOTO, S. - ENDO, M.: FATIGUE and FRACTURE OF ENGINEERING MATERIALS and STRUCTURES, 2011, vol.34, no.1, 72-82

BRUNCKOVÁ, H. - KOVÁ Č, F.: Sulphide-Nitride Inhibition Variant with AlN, MnS Precipitates and Cu Coprecipitates with MnS in Fe-3% Si Steels. Metalurgija, 39, 2000, 1, s.9-14

Zahr.WOS: PETROVIC, DS., ARH, B., TEHOVNIK, F., PIRNAT, M.: ISIJ INTERNATIONAL, 2011, vol.51, no.12, 2069-2075

BESTERCI, M. - ŠLESÁR, M. - KOVÁ Č, L. - IVAN, J. - ZBIRAL, J. - EDTMAIER, Ch.: Distribution of Y2O3 Particles in the Pt-Y2O3 System Determined by STEM. Journal of Materials Science Letters, 19, 2000, s.151-152

Zahr.WOS: SEKIDO, N., HOSHINO, A., FUKUZAKI, M., YAMABE-MITARAI, Y., MARUKO, T.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.29-30, 8451-8459

JANOVEC, J. - TAKAHASHI, M. - KURODA, T. - IKEUCHI, K.: Microstructural and Mechanical Aspects of Tempered ICCGHAZ of SQV-2A Low Alloy Steel Weld. ISIJ International, 40, 2000, Suppl, s.S44-S48

Scopus: XU, L.-H. - CHEN, Y.-Q. - ZHANG, J. - ZENG, Y.-B. - WANG, J.: Kang T'ieh/Iron and Steel (Peking), 2011, vol.46, no.2, 62-68

Zahr.WOS: KIM, S. - KANG, D. - KIM, T.-W. - LEE, J. - LEE, C.: Materials Science and Engineering A, 2011, vol.528, no.6, 2331-2338

DŽUBINSKÝ, M. - KOVÁ Č, F. - ČERNÍK, M.: Secondary Recrystallization Kinetics in GO Electrotechnical Steels. Journal of Magnetism and Magnetic Materials, 215-216, 2000, s.83-85

Scopus: QIAN, H. - YANG, P. - SUN, X. - MAO, W.-M. - WANG, L.-L. - JIN, W.-X. - JIANG, Q.-W.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.11, 88-93

Dom.iné: BELLA, P., KOČIŠKO, R., KOVÁČOVÁ, A., TIŽA, J., SAS, J., NÉMETHOVÁ, L.: Metalurgia Junior 2011. Faculty of Metallurgy PhD Students Day. Košice, 25.-26.5.2011. Košice : HF TU, 2011, s. 45-48

ŠALAK, A. - SELECKÁ, M. - KERESTI, R. - PARILÁK, Ľ.: Mechanical Properties of Sintered Fe-Mn-Cr-Mo-V Steels. In: 2000 Powder Metallurgy World Congress. PM 2000. Part 1. Kyoto, 12.-16.11.2000. Ed. K.Kosuge, H.Nagai, s.9-12

Zahr.WOS: TORRALBA, JM. - DE ORO, R.- CAMPOS, M.: RESEARCHES IN POWDER METALLURGY, 2011, vol.672, no., 3-11

ŠAJGALÍK, P. - HNATKO, M. - LOFAJ, F. - HVIZDOŠ, P. - DUSZA, J. - WARBICHLER, P. - HOFFER, F. - RIEDEL, R. - LECOMTE, E. - HOFFMANN, M.J.: SiC/Si3N4 Nano/Micro-Composite-Processing, RT and HT Mechanical Properties. Journal of the European Ceramic Society, 20, 2000, s.453-462

Zahr.WOS: WU, L., SUN, W., CHEN, Y., LU, Y., JIANG, Y., HUANG, Z.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.12, 4453-4458

Zahr.WOS: YANG, L. - LI, J. - WANG, R.: Key Engineering Materials, 2011, vol.474-476, 1881-1886 CLAUBERG, E. - JANOVEC, J. - UEBING, C. - VIEFHAUS, H. - GRABKE, H.J.: Surface Segregation on Fe-25%Cr-2%Ni-0,14%Sb-N,S(100) Single Crystal Surfaces. Applied Surface Science, 161, 2000, s.35-46

Zahr.WOS: ALI-LOYTTY, H. - JUSSILA, P. - HIRSIMAKI, M. - VALDEN, M.: APPLIED SURFACE SCIENCE, 2011, vol.257, no.17, 7783-7791

JANOVEC, J. - BOGYÓ, M. - BLACH, J. - ZÁHUMENSKÝ, P. - VÝROSTKOVÁ, A. : Splitting of AISI 316 Austenitic Stainless Steel. Canadian Metallurgical Quarterly, 40, 2001, 1, s.97-104

Zahr.iné: YONETKEN, A., CAKMAKKAYA, M., EROL, A., TALAS, S.: Materials Science-Poland, vol. 29, 2011, 1, p. 15-21

ZÁHUMENSKÝ, P. - TULEJA, S. - ORSZÁGHOVÁ, J. - JANOVEC, J. - MAGULA, V.: Changes in Corrosion Resistance of 18%Cr-12%Ni-Type Stainless Steels after Sensitization. Corrosion Science, 57, 2001, s.874-883

Zahr.WOS: LEIVA-GARCIA, R. - MUNOZ-PORTERO, M. J. - GARCIA-ANTON, J.: INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2011, vol.6, no.2, 442-460

CENIGA, L. - KOVÁ Č, F.: Influence of Annealing and Hydrogenation-Dehydrogenation Processes on Internal Stresses and Barkhausen Noise of Fe83B17 Amorphous Alloy. Journal of Materials Science, 36, 2001, s.4125-4129

Zahr.WOS: SKULKINA, NA., IVANOV, OA., STEPANOVA, EA., PAVLOVA, IO.: PHYSICS OF METALS AND METALLOGRAPHY, 2011, vol.111, no.5, 458-463

JAKUBÉCZYOVÁ, D. - BLACH, J. - FÁBEROVÁ, M. : Vplyv prídavkov Co, Nb a Ti na štruktúru a vlastnosti PM rýchloreznej ocele. Kovové materiály, 39, 2001, 4, s.278-288

Dom.WOS: BALA, P., PACYNA, J., KRAWCZYK, J.: Kovové materiály, 49, 2011, s. 125-130 PERHÁČOVÁ, J. - GRMAN, D. - SVOBODA, M. - PATSCHEIDER, J. - VÝROSTKOVÁ, A. - JANOVEC, J.: Microstructural Aspects of Phosphorus Grain Boundary Segregation in Low Alloy Steels. Materials Letters, 47, 2001, s.44-49

Zahr.WOS: WANG, H., SHI, W., HE, Y., FU, R., LI, L.: ACTA METALLURGICA SINICA, 2011, vol.47, no.3, 263-268

DŽUBINSKÝ, M. - KOVÁ Č, F.: Influence of Heat Cycling on Microstructural Parameters of Fe-3%Si Grain Oriented Steel. Scripta Materialia, 45, 2001, s.1205-1211

Zahr.WOS: WANG, XL., ZHAO, HM., DAI, WB., ZHAO, X.: Advanced Materials Research, 197-198, 2011, p. 1104-1108

Scopus: QIAN, H. - YANG, P. - SUN, X. - MAO, W.-M. - WANG, L.-L. - JIN, W.-X. - JIANG, Q.-W.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.11, 88-93

BRUNCKOVÁ, H. - KOVÁ Č, F.: Termodynamické podmienky a kinetika precipitácie častíc v hlbokoťažných IF oceliach. Kovové materiály, 40, 2002, 1, s.53-63

Scopus: LONGAUEROVÁ, M. - BEKEČ, P. - FEDOROVÁ, M. - LONGAUER, S.: Acta Metallurgica Slovaca, 2011, vol.17, no.3, 177-185

DŽUBINSKÝ, M. - KOVÁ Č, F. - PETERČÁKOVÁ, A. : New Form of Equation for Deformation Resistance Prediction under Hot Rolling Industrial Condition. Scripta Materialia, 47, 2002, 2, s.119-124

Zahr.WOS: HAN, Q., KANG, Y., ZHAO, X., GAO, L., QIU, X.: International Journal of Minerals, Metallurgy and Materials, 18, 2011, 4, p. 407-413

ŠEVC, P. - MANDRINO, D. - BLACH, J. - JENKO, M. - JANOVEC, J.: Interfacial Study of 19Cr-13Ni Austenitic Stainless Steel after Holding at Elevated Temperatures. Kovové materiály, 40, 2002, 1, s.35-44

Zahr.WOS: KOCIJAN, A.: Materiali in tehnologije, 45, 2011, 2, p. 91-94 Zahr.WOS: DONIK, C.: MATERIALI IN TEHNOLOGIJE, 2011, vol.45, no.4, 329-333

ŠALAK, A. - SELECKÁ, M. : Mechanical and Friction Properties of Sintered (1-5)% Manganese Steel. In: 3rd International Powder Metallurgy Conference. Ankara, 4.-8.9.2002. Turkish Powder Metallurgy Association 2002, s.230-246

Zahr.WOS: TEKELI, S. - GÜRAL, A. - ÖZYÜREK, D.: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011, vol.225, no.8, 814-820

HOMOLOVÁ, V. - JANOVEC, J. - KROUPA, A.: Experimental and Thermodynamic Studies of Phase Transformations in Cr-V Low Alloy Steels. Materials Science and Engineering A, 335, 2002, s.290-297

Zahr.WOS: FALAT, L. - KEPIČ, J. - VÝROSTKOVÁ, A. - SVOBODA, M. - BRZIAK, P.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s503-s505

Dom.WOS: FALAT, L. - VYROSTKOVA, A. - SVOBODA, M. - MILKOVIC, O.: KOVOVE MATERIALY-METALLIC MATERIALS, 2011, vol.49, no.6, 417-426

DUDROVÁ, E. - KABÁTOVÁ, M. : Microstructure, Mechanical Properties and Fracture Behaviour of Manganese Sintered Steels. In: Deformation and Fracture in Structural PM Materials. Vol. 1. Stará Lesná, 15.-18.9.2002. Ed. Ľ. Parilák, H. Danninger. Košice, ÚMV SAV 2002, s.107-115

Zahr.WOS: BAGLYUK, GA., SOSNOVSKII, IA., VOLFMAN, VI., KHOMENKO, AI.: Powder Metallurgy and Metal Ceramics, vol. 49, 2011, no. 9-10, p. 594-597

Zahr.WOS: BAGLYUK, GA., SOSNOVSKII, IA., VOLFMAN, VI.: Powder Metallurgy and Metal Ceramics, vol. 50, 2011, no. 3-4, p. 189-193

BESTERCI, M. - IVAN, J. - KULU, P. - ARENSBURGER, D. - VELGOSOVÁ, O.: Model of Fracture Micromechanism of Cu-Cr-Zr System by ""in situ"" Tensile Test in SEM. Journal of Mining and Metallurgy B, 39, 2003, 3/4, s.499-507

Zahr.WOS: NASEEM, K., YANG, YQ., LUO, X., HUANG, B., FENG, GH.: Materials Science and Engineering A, 528, 2011, 13-14, p. 4507-4515

HOMOLOVÁ, V. - JANOVEC, J. - ZÁHUMENSKÝ, P. - VÝROSTKOVÁ, A. : Influence of Thermal-Deformation History on Evolution of Secondary Phases in P91 Steel. Materials Science and Engineering A, 349, 2003, s.306-312

Zahr.WOS: JIAO, Z. - SHANKAR, V. - WAS, GS.: JOURNAL OF NUCLEAR MATERIALS, 2011, vol.419, no.1-3, 52-62

Zahr.WOS: DUTT, B. S. - BABU, M. N. - VENUGOPAL, S. - SASIKALA, G. - BHADURI, A. K.: MATERIALS SCIENCE AND TECHNOLOGY, 2011, vol.27, no.10, 1527-1533

KOVA Ľ, V. - ALEMANY, C. - BRIANČIN, J. - BRUNCKOVÁ, H. - SAKSL, K.: Effect of PMN Modification on Structure and Electrical Response of xPMN-(1-x)PZT Ceramic Systems. Journal of the European Ceramic Society, 23, 2003, s.1157-1166

Scopus: LUO, N. - LI, Q. - XIA, Z.: Materials Research Bulletin, 2011, vol.46, no.9, 1333-1339 Zahr.WOS: ZUO, R FU, J., LU, S., XU, Z.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011,

vol.94, no.12, 4352-4357 KOVÁ Č, F. - DŽUBINSKÝ, M. - BOŘUTA, J.: Prediction of Low Carbon Steels Behaviour under Hot Rolling Service Conditions. Acta Materialia, 51, 2003, s.1801-1808

Zahr.iné: RODRIGUES, P., SANTOS PAULA, A., CAMPOS, MF.: 6. Congresso Brasileiro de Engenharia de Fabricacao. Caxias do Sul, Brasil, 11.-15.4.2011

Zahr.iné: MURAKAMI, H., NISHIMURA, S., SANAGI, S.: United States Patent US 7,922,837 B2, Apr. 12, 2011

CENIGA, L. : Thermal Stresses in Surface-Coated Fe-3%Si Sheet. Journal of Materials Science, 38, 2003, s.3709-3712

Zahr.WOS: MRVA, P., KOTTFER, D., KACZMAREK, L.: Archives of Metallurgy and Materials, vol. 56, 2011, no. 3, p. 743-748

BALÁŽ, P. - BOLDIŽÁROVÁ, E. - GODOČÍKOVÁ, E. - BRIANČIN, J.: Mechanochemical Route for Sulphide Nanoparticles Preparation. Materials Letters, 57, 2003, s.1585-1589

Zahr.WOS: KACI, S. - KEFFOUS, A. - GUERBOUS, L. - TRARI, M.: THIN SOLID FILMS, 2011, vol. 520, no. 1, pp. 79

Zahr.WOS: POMOGAILO, AD. - KYDRALIEVA, KA. - ZARIPOVA, AA. - MURATOV, VS. - DZHARDIMALIEVA, GI. - POMOGAILO, SI. - GOLUBEVA, ND. - JOROBEKOVA, SJ. - COSTAMAGNA, J - RABAGLIATI, FM - RIVAS, BL.: MACROMOLECULAR COMPLEXES, 2011, vol. 304, pp. 18

Zahr.WOS: EHRLICH, H. - SHCHERBA, T. - ZHILENKO, M. - LISICHKIN, G.: MATERIALS LETTERS, 2011, vol. 65, no. 1, pp. 107

Zahr.WOS: PUA, FL. - CHIA, CH. - ZAKARIA, S. - NEOH, SK. - LIEW, TK.: SAINS MALAYSIANA, 2011, vol. 40, no. 3, pp. 221

DŽUBINSKÝ, M. - KOVÁ Č, F. - PETERČÁKOVÁ, A. : New Form of Equation for Deformation Resistance Prediction under Hot Rolling Industrial Conditions. Metalurgija, 42, 2003, 3, s.179-183

Zahr.WOS: HE, C., JIAO, Z., WU, D.: Advanced Materials Research, 154-155, 2011, p. 260-264 JANOVEC, J. - VÝROSTKOVÁ, A. - ŠEVC, P. - ROBINSON, J. - SVOBODA, M. - KRESŤÁNKOVÁ, J. - GRABKE, H.J.: Precipitation Related Anomalies in Kinetics of Phosphorus Grain Boundary Segregation in Low Alloy Steels. Acta Materialia, 51, 2003, s.4025-4032

Zahr.WOS: ZHENG, L., ZHANG, MC., DONG, JX., MENG, Y.: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, vol.18, no.1, 68-72

Zahr.WOS: WANG, K., SI, H., YANG, C., XU, T., SHAO, C., CHEN, X.: MATERIALS LETTERS, 2011, vol.65, no.11, 1639-1641

SELECKÁ, M. - ŠALAK, A. - DANNINGER, H.: The Effect of Boron Liquid Phase Sintering on Properties of Ni-, Mo- and Cr- Alloyed Structural Steels. Journal of Materials Processing Technology, 141, 2003, s.379-384

Zahr.WOS: WIDANKA, K.: Archives of Civil and Mechanical Engineering, vol. 11, 2011, no. 2, p. 469-477 LOFAJ, F. - HVIZDOŠ, P. - DORČÁKOVÁ, F. - SATET, R. - HOFFMANN, M.J. - DE ARELLANO-LÓPEZ, A.: Indentation Moduli and Microhardness of RE-Si-Mg-O-N Glasses (RE=Sc,Y,La,Sm,Yb and Lu) with Different Nitrogen Content. Materials Science and Engineering A, 357, 2003, s.181-187

Zahr.WOS: TATARKO, P. - KAŠIAROVÁ, M. - DUSZA, J. - ŠAJGALÍK, P.: Chemicke Listy, 2011, vol.105, no.17, s850-s851

Zahr.WOS: ALI, Sharafat - JONSON, Bo.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.4, 611-618

Zahr.WOS: ALI, Sharafat - JONSON, Bo: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.9, 2912-2917


Zahr.WOS: IFTEKHAR, S., GRINS, J., GUNAWIDJAJA, PN., EDEN, M.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.8, 2429-2435

BRUNCKOVÁ, H. - MEDVECKÝ, Ľ. - BRIANČIN, J. - SAKSL, K. : Influence of Hydrolysis Conditions of the Acetate Sol-Gel Process on the Stoichiometry of PZT Powders. Ceramics International, 30, 2004, s.453-460

Scopus: ZHU, B.-C. - GAO, P.-Z. - LI, Y.-P. - PENG, J. - CHEN, G.-T.: Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2011, vol.16, no.3, 368-373

Zahr.WOS: CAMPO CEBALLOS, Diego A. - RODRIGUEZ PAEZ, Jorge E.: DYNA-COLOMBIA, 2011, vol.78, no.165, 224-233

BESTERCI, M. - IVAN, J. - PEŠEK, L. - VELGOSOVÁ, O. - HVIZDOŠ, P.: Damage Mechanism of Al-12Al4C3. Materials Letters, 58, 2004, s.867-870

Zahr.WOS: SUN, Y., CUI, H., GONG, L., CHEN, J., SHEN, PK., WANG, C X.: NANOSCALE, 2011, vol.3, no.7, 2978-2982

Zahr.WOS: SURESH, M., SRINIVASAN, A., RAVI, KR., PILLAI, UTS., PAI, BC.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.6, 2502-2508

Zahr.WOS: SUN, Y., CUI, H., GONG, L., CHEN, J., SHE, J., MA, Y., SHEN, P., WANG, C.: ACS NANO, 2011, vol.5, no.2, 932-941

KOVÁ Č, F. - DŽUBINSKÝ, M. - SIDOR, J.: Columnar Grain Growth in Non-Oriented Electrical Steels. Journal of Magnetism and Magnetic Materials, 269, 2004, s.333-340

Zahr.WOS: GUTIERREZ-CASTANEDA, EJ., SALINAS-RODRÍGUEZ, A.: Journal of Magnetism and Magnetic Materials, 2011, vol.323, no.20, 2524-2530

DUDROVÁ, E. - KABÁTOVÁ, M. - BIDULSKÝ, R. - WRONSKI, A.S.: Industrial Processing, Microstructures and Mechanical Properties of Fe-(2-4)Mn (-0,85Mo)-(0,3-0,7)C Sintered Steels. Powder Metallurgy, 47, 2004, 2, s.181-190

Zahr.WOS: BAILON-POUJOL, I., BAILON, JP., L´ESPERANCE, G.: Powder Technology, vol. 210, 2011, no. 3, p. 267-272

Zahr.WOS: BAGLYUK, GA., SOSNOVSKII, IA., VOLFMAN, VI., KHOMENKO, AI.: Powder Metallurgy and Metal Ceramics, vol. 49, 2011, no. 9-10, p. 594-597

Zahr.WOS: SOSNOVSKII, L. A. - BAGLYUK, G. A. - SLYS, I. G.: POWDER METALLURGY AND METAL CERAMICS, 2011, vol.49, no.11-12, 730-736

Zahr.WOS: BAGLYUK, GA., SOSNOVSKII, IA., VOLFMAN, VI.: Powder Metallurgy and Metal Ceramics, vol. 50, 2011, no. 3-4, p. 189-193

Scopus: LINDSLEY, B. - BRIAN JAMES, W. - NISHIDA, T. - NARASIMHAN, K.S.: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2011, vol.58, no.10, 602-608

SIDOR, J. - DŽUBINSKÝ, M. - KOVÁ Č, F.: Microstructure and Favourable Texture Development in Non-Oriented Electrical Steels. In: TMP 2004. 2nd International Conference on Thermomechanical Processing of Steels. Liege, 15.-17.6.2004. Ed. M. Lamberigts. Düsseldorf : Stahleisen 2004, s.514-521

Dom.iné: BELLA, P., KOČIŠKO, R., KOVÁČOVÁ, A., TIŽA, J., SAS, J., NÉMETHOVÁ, L.: Metalurgia Junior 2011. Faculty of Metallurgy PhD Students Day. Košice, 25.-26.5.2011. Košice : HF TU, 2011, s. 45-48

HVIZDOŠ, P. - KAŠIAROVÁ, M. - DUSZA, J. - HNATKO, M. - ŠAJGALÍK, P.: Mechanické vlastnosti nanokompozitov Si3N4/SiC merané inštrumentovanou indentáciou sférickým indentorom. Kovové materiály, 42, 2004, 1, s.51-62

Zahr.iné: JAKUBÉCZYOVÁ, D., HAGAROVÁ, M., ŠTĚPÁNEK, I.: Vrstvy a povlaky 2011. Rožnov pod Radhoštěm, 17.-18.10.2011. Trenčín : Miloš Vavrík, 2011, s. 49-53

LOFAJ, F. - SATET, R. - HOFFMANN, M.J. - DE ARELLANO-LÓPEZ, A.: Thermal Expansion and Glass Transition Temperature of the Rare-Earth Doped Exynitride Glasses. Journal of the European Ceramic Society, 24, 2004, s.3377-3385



Zahr.WOS: WANG, Mi-tang - CHENG, Jin-shu - LI, Mei - HE, Feng.: PHYSICA B-CONDENSED MATTER, 2011, vol.406, no.2, 187-191

Zahr.WOS: WANG, M., CHENG, J., LI, M., HE, F.: PHYSICA B-CONDENSED MATTER, 2011, vol.406, no.20, 3865-3869

Zahr.WOS: ALI, S. - JONSON, B.: Journal of the Australian Ceramic Society, 2011, vol.47, no.2, 8-12 Zahr.WOS: ALI, Sharafat - JONSON, Bo.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011,

vol.31, no.6, 1187-1188 Zahr.WOS: ZADE, D. - SATO, S. - KAKUSHIMA, K. - SRIVASTAVA, A. - AHMET, P. - TSUTSUI, K. -

NISHIYAMA, A. - SUGII, N. - NATORI, K. - HATTORI, T. - SARKAR, C.K. - IWAI, H.:Microelectronics Reliability, 2011, vol.51, no.4, 746-750

Zahr.WOS: LIU, H. - WANG, X. - WANG, Z. - ZHANG, B.: Advanced Materials Research, 2011, vol.295-297, 406-409

Zahr.WOS: IFTEKHAR, S., GRINS, J., GUNAWIDJAJA, PN., EDEN, M.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.8, 2429-2435

CENIGA, L. : Thermal Stresses in Triaxial Anisotropic Particle-Matrix System. Journal of Thermal Stresses, 27, 2004, s.471-489

Zahr.WOS: PESEK, L., ZUBKO, P., BESTERCI, M.: INTERNATIONAL JOURNAL OF MATERIALS and PRODUCT TECHNOLOGY, 2011, vol.40, no.3-4, 226-249

MEDVECKÝ, Ľ. - BRIANČIN, J.: Possibilities of Simultaneous Determination of Indium and Gallium in Binary InGa Alloys by Anodic Stripping Voltammetry in Acetate Buffer. Chemical Papers, 58, 2004, s.93-100

Zahr.WOS: CHOU, Wei-Lung - CHEN, Li-Shien - HUANG, Yen-Hsiang - HUANG, Chih-Yang: FRESENIUS ENVIRONMENTAL BULLETIN, 2011, vol.20, no.3, 603-610

DUSZA, J. - KOVAL ČÍK, J. - HVIZDOŠ, P. - ŠAJGALÍK, P. - HNATKO, M. - REECE, M.J.: Creep Behavior of a Carbon-Derived Si3N4/SiC Nanocomposite. Journal of the European Ceramic Society, 24, 2004, s.3307-3315

Zahr.WOS: BARAI, P., WENG, GJ.: INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 2011, vol.49, no.1, 155-174

KAŠIAROVÁ, M. - RUDNAYOVÁ, E. - DUSZA, J. - HNATKO, M. - ŠAJGALÍK, P. - MERSTALLINGER, A. - KUZSELLA, L.: Some Tribological Properties of a Carbon-Derived Si3N4/SiC Nanocomposite. Journal of the European Ceramic Society, 24, 2004, s.3431-3435

Zahr.WOS: GORYANY, V., WAGNER, R.: MATERIALS TESTING, 2011, vol.53, no.11-12, 748-757 Zahr.WOS: ZOU, B., HUANG, C., SONG, J., LIU, H., ZHU, H.: MACHINING SCIENCE AND

TECHNOLOGY, 2011, vol.15, no.2, 192-205 LOFAJ, F. - DÉRIANO, S. - LEFLOCH, M. - ROUXEL, T. - HOFFMANN, M.J.: Structure and Rheological Properties of the RE-Si-Mg-O-A (RE=Sc, Y, La, Nd, Sm, Gd, Yb and Lu) Glasses. Journal of Non-Crystalline Solids, 344, 2004, s.8-16



Zahr.WOS: YANG, X. - LONG, H. - CHENG, G. - WU, C. - WU, B.: Journal of Rare Earths, 2011, vol.29, no.11, 1079-1083


ĎURIŠIN, J. - ĎURIŠINOVÁ, K. - OROLÍNOVÁ, M. - SAKSL, K. : Effect of the MgO Particles on the Nanocrystalline Copper Grain Stability. Materials Letters, 58, 2004, s.3796-3801

Zahr.WOS: KAMRANI, S. - HESABI, Z. Razavi - RIEDEL, R. - REIHANI, S. M. Seyed: ADVANCED COMPOSITE MATERIALS, 2011, vol.20, no.1, 13-27

Zahr.WOS: QIN, YQ., WU, YC., WANG, Y., HONG, Y., DENG, JQ., CHEN, XL., WANG, WF., HUANG, XM.: Advanced Materials Research, vol. 239-242, 2011, p. 2756-2759

KUSÝ, M. - GRGAČ, P. - BEHULOVÁ, . - VÝROSTKOVÁ, A. - MIGLIERINI, M.: Morphological Variants of Carbides of Solidification Origin in the Rapidly Solidified Powder Particles of Hypereutectic Iron Alloy. Materials Science and Engineering A, 375-377, 2004, s.599-603

Zahr.WOS: YANG, M., SONG, C., JIANG - DAI, YX., ZHU, L., LI, KF., ZHAI, QJ.: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, vol.18, no.2, 75-78

JANOVEC, J. - VÝROSTKOVÁ, A. - SVOBODA, M. - KROUPA, A. - GRABKE, H.J.: Evolution of secondary phases in Cr-V low-alloy steels during aging. Metallurgical and Materials Transactions A, 35, 2004, s.751-759

Zahr.WOS: LIU, Q. D. - LIU, W. Q. - ZHAO, S. J.: METALLURGICAL AND MATERIALS TRANSACTIONS A, 2011, vol.42A, no.13, 3952-3960

KUSÝ, M. - ČAPLOVIČ, Ľ. - GRGAČ, P. - VÝROSTKOVÁ, A. : Solidification microstructures in the rapidly solidified powder of high alloyed V-Cr tool steel. Journal of Materials Processing Technology, 157-158, 2004, s.729-734

Zahr.WOS: MORISADA, Y., FUJII, H., MIZUNO, T., ABE, G., NAGAOKA, T., FUKUSUMI, M.: SURFACE and COATINGS TECHNOLOGY, 2011, vol.205, no.11, 3397-3403

ŠALAK, A. - SELECKÁ, M. - DANNINGER, H.: Machinability of Powder Metallurgy Steels. Cambridge : Interscience Publ., 2005, 536 s.

Zahr.WOS: TUTUNEA-FATAN, O.R., FAKHRI, M.A., BORDATCHEV, E.V.: Proceedings of the Institution of Mechanical Engineers B - Journal of Engineering Manufacture, vol. 225, 2011, p. 619-630

Zahr.WOS: YILMAZ, N., VAROL, R.: Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 26, 2011, p. 161-171

SIDOR, J. - KOVÁ Č, F.: Effect of Heat Treatment Conditions on the Internal and External Oxidation Processes in Non-Oriented Electrical Steels. Materials and Design, 26, 2005, s.297-304

Zahr.WOS: PETROVIC, DS.: ISIJ INTERNATIONAL, 2011, vol.51, no.9, 1539-1544 Zahr.WOS: PETROVIC, DS., MANDRINO, D.: MATERIALS CHARACTERIZATION, 2011, vol.62, no.5,

503-508 SIDOR, J. - KOVÁ Č, F.: Microstructural Aspects of Grain Growth Kinetics in Non-Oriented Electrical Steels. Materials Characterization, 55, 2005, s.1-11



Scopus: WANG, X.-Y. - YU, H.: Cailiao Kexue yu Gongyi/Material Science and Technology, 2011, vol.19, no.3, 66-70+75

LOFAJ, F. - DORČÁKOVÁ, F. - HOFFMANN, M.J.: The Effect of Nitrogen on Viscosity of La-Si-Mg-O-A Glasses by Compressive Creep and Dilatometry. Journal of Materials Science, 40, 2005, s.47-51

Scopus: HAMPSHIRE, S. - POMEROY, M.J.: Key Engineering Materials, 2011, vol.484, 46-51 Zahr.WOS: DAI, W., WANG, X., YU, J., ZOU, Z.: ACTA METALLURGICA SINICA, 2011, vol.47, no.11,

1440-1444 KOVA Ľ, V. - REECE, M.J. - BUSHBY, A.: Ferroelectric/Ferroelastic Behaviour and Piezoelectric Response of Lead Zirconate Titanate Thin Films under Nanoindentation. Journal of Applied Physics, 97, 2005, s.074301-1-7

Zahr.WOS: BHASKARAN, M., SRIRAM, S., RUFFELL, S., MITCHELL, A.: ADVANCED FUNCTIONAL MATERIALS, 2011, vol.21, no.12, 2251-2257

Zahr.WOS: ZHAO, B., KIM, YH., YARLAGADDA, P., ZHANG, XD., AI, ZJ.: ADVANCED MATERIALS AND STRUCTURES, PTS 1 AND 2, 2011, vol.335-336, p. 1014-1020

ĎURIŠIN, J. - ĎURIŠINOVÁ, K. - OROLÍNOVÁ, M. - SAKSL, K. : Preparation and Microstructure Evolution of Nanocomposite Powder Copper. In: International Journal of Materials and Product Technology, 23, 2005, 1/2, s.42-68

Zahr.iné: LU, J., HUANG, J., WU, J., JI, T.: Journal of the Chinese Ceramic Society, vol. 39, 2011, p. 1531-1535

WIEDERHORN, S.M. - KRAUSE, R. - LOFAJ, F. - TÄFFNER, U.: Creep Behaviour of Improved High Temperature Silicon Nitride. Key Engineering Materials, 287, 2005, s.381-392

Scopus: HAMPSHIRE, S. - POMEROY, M.J.: Key Engineering Materials, 2011, vol.484, 46-51 SAKSL, K. - ĎURIŠIN, J. - OROLÍNOVÁ, M. - ĎURIŠINOVÁ, K. - LAZAR, P.: Structural Study on Al-26 Mass% Si-8 Mass% Ni Powder. Journal of Materials Science, 40, 2005, s.1975-1978

Zahr.WOS: CAI, Y., LIANG, R., HOU, L., ZHANG, J.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.12, 4248-4254

BESTERCI, M. - PEŠEK, L. - ZUBKO, P. - HVIZDOŠ, P.: Mechanical Properties of Phases in Al-Al4C3 Mechanically Alloyed Material Measured by Depth Sensing Indentation Technique. Materials Letters, 59, 2005, s.1971-1975

Zahr.WOS: RAJARAM, G., KUMARAN, S., RAO, TS.: TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2011, vol.64, no.1-2, 53-56

Scopus: ESTRADA-GUEL, I. - CARDOSO, J.L. - CARENO-GALLARDO, C. - BARAJAS-VILLARUEL, J.I. - MIKI-YOSHIDA, M. - HERRERA-RAMÍREZ, J.M. - MARTÍNEZ-SÁNCHEZ, R.: Materials Science Forum, 2011, vol.691, 37-43

Zahr.WOS: SUBRAMANIAN, J., GUAN, K., KUMA, J., GUPTA, M.: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, vol.211, no.8, 1416-1422

Zahr.iné: JAKUBÉCZYOVÁ, D., HAGAROVÁ, M., ŠTĚPÁNEK, I.: Vrstvy a povlaky 2011. Rožnov pod Radhoštěm, 17.-18.10.2011. Trenčín : Miloš Vavrík, 2011, s. 49-53

BESTERCI, M. - BALLÓKOVÁ, B. - HVIZDOŠ, P. - SCHOLL, R. - BÖHM, A.: Creep Behaviour of MoSi2-HfO2 Composites. Journal of Materials Sciencie, 40, 2005, s.3869-3871

Scopus: XU, K. - CHEN, H. - MA, Q. - ZHAO, X.: Fenmo Yejin Jishu/Powder Metallurgy Technology, 2011, vol.29, no.3, 173-176+182

DANNINGER, H. - PÖTTSCHACHER, R. - BRADAC, S. - ŠALAK, A. - SEYRKAMMER, J.: Comparison of Mn, Cr and Mo Alloyed Sintered Steels Prepared from Elemental Powders. Powder Metallurgy, 48, 2005, 1, s.23-32


Zahr.WOS: TORRALBA, JM. - DE ORO, R.- CAMPOS, M.: RESEARCHES IN POWDER METALLURGY, 2011, vol.672, no., 3-11

DUDROVÁ, E. - KABÁTOVÁ, M. - BUREŠ, R. - BIDULSKÝ, R. - WRONSKI, A.S.: Processing, Microstructure and Properties of 2-4%Mn and 0,3/0,7C Sintered Steels. Kovové materiály, 43, 2005, 6, s.404-421

Scopus: SHATSOV, A.A. - RYAPOSOV, I.V. - LARININ, D.M.: Advances in Tribology, 2011 DIKO, P. - KRAČUNOVSKÁ, S. - CENIGA, L. - BIERLICH, J. - ZEISBERGER, M. - GAWALEK, W.: Microstructure of Top Seeded Melt-Grown YBCO Bulks with Holes. Superconductor Science and Technology, 18, 2005, s.1400-1404

Zahr.WOS: JANG, G., LEE, M., HAN, S., KIM, C., HAN, Y., PARK, B.: JOURNAL OF MAGNETICS, 2011, vol.16, no.2, 181-185

JANOVEC, J. - SVOBODA, M. - VÝROSTKOVÁ, A. - KROUPA, A.: Time-temperature-precipitation diagrams of carbide evolution in low alloy steels. Materials Science and Engineering A, 402, 2005, s.288-293

Zahr.WOS: CHENG, WC., HWANG, SM.: METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, vol.42A, no.7, 1760-1766

MEDVECKÝ, Ľ. - ŠTULAJTEROVÁ, R. - PARILÁK, Ľ. - TRPČEVSKÁ, J. - ĎURIŠIN, J. - BARINOV, S.M.: Influence of Manganese on Stability and Particle Growth of Hydroxyapatite in Simulated Body Fluid. Colloids and Surfaces A, 281, 2006, s.221-229

Zahr.WOS: SHEPHERD, J. H. - BEST, S. M.: JOM, 2011, vol.63, no.4, 83-92 Zahr.WOS: NASR, S. - BOUZOUITA, K.: BIOINORGANIC CHEMISTRY AND APPLICATIONS, 2011, Scopus: QI, G. - SHAN, F. - LI, Q. - YU, J. - ZHANG, Q.: Advanced Materials Research, 2011, vol.299-300,

508-511 Zahr.WOS: MENE, RU. - MAHABOLE, MP. - SHARMA, R. - KHAIRNAR, RS.: VACUUM, 2011, vol.86,

no.1, 66-71 ŠALAK, A. - VASILKO, K. - SELECKÁ, M. - DANNINGER, H.: New Short Time Face Turning Method for Testing the Machinability of PM Steels. Journal of Materials Processing Technology, 176, 2006, s.62-69

Zahr.WOS: HLOCH, S., VALICEK, J.: INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2011, vol.5, no.2-3, 152-168

Zahr.WOS: JIN, D. - LIU, Z. - YI, W. - SU, G.: International Journal of Advanced Manufacturing Technology, 2011, vol.56, no.5-8, 553-559

Zahr.WOS: QIAO, Y., AI, X., LIU, ZQ., ZHAO, J.: Manufacturing Engineering and Automation I. Advanced Materiald Research, vol. 139-141, 2011, p. 805-808

Zahr.WOS: QIAO, Y., AI, X., LIU, Z.: Functional Manufacturing Technologies and CEEUSRO II. Key Engineering Materials, vol. 464, 2011, p. 556-559

Zahr.WOS: DU, J., LIU, ZQ., TANN, C., PANG, JY.: 4th International Seminar on modern Cutting and Measurement Engineering Book Series: Proceedings of SPIE-The International Society for Optical Engineering, vol. 7997, 2011, art.no. 799717

Dom.iné: MONKOVÁ, K., MONKA, P.: Proceedings in Manufacturing Systems, 6, 2011, 1, p. 49-52 Zahr.WOS: QIAO, Y., AI, X., LIU, Z.: MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011,

vol.154-155, no., 708-711 BESTERCI, M. : Preparation, Microstructure and Properties of Al-Al 4C3 System Produced by Mechanical Alloying. Materials and Design, 27, 2006, s.416-421

Scopus: ESTRADA-GUEL, I. - CARDOSO, J.L. - CARENO-GALLARDO, C. - BARAJAS-VILLARUEL, J.I. - MIKI-YOSHIDA, M. - HERRERA-RAMÍREZ, J.M. - MARTÍNEZ-SÁNCHEZ, R.: Materials Science Forum, 2011, vol.691, 37-43

BARINOV, S.M. - RAU, J. - NUNZIANTE CESARO, S. - ĎURIŠIN, J. - FADEEVA, I. - FERRO, D. - MEDVECKÝ, Ľ. - TRIONFETTI, G.: Carbonate Release from Carbonated Hydroxyapatite in the Wide Temperature Rage. Journal of Materials Science: Materials in Medicine, 17, 2006, s.597-604

Zahr.WOS: LOMBARDI, M. - PALMERO, P. - HABERKO, K. - PYDA, W. - MONTANARO, L.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.14, 2513-2518

Zahr.WOS: WANG, LN., LUO, JL.: METALLURGICAL AND MATERIALS TRANSACTIONS A, 2011, vol.42A, no.11, 3255-3264

Zahr.WOS: WANG, LN., ADAMS, A., LUO, JL.: JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B, 2011, vol.99B, no.2, 291-301

Zahr.WOS: LI, Kai - TJONG, Sie Chin: JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2011, vol.50, no.12, 2442-2453

Zahr.WOS: YOUNESI, M. - JAVADPOUR, S. - BAHROLOLOOM, M. E.: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, vol.20, no.8, 1484-1490

BESTERCI, M. - KVAČKAJ, T. - KOVÁ Č, L. - SÜLLEIOVÁ, K. - KULU, P.: Mechanical Properties and Fracture of Nanocopper by Severe Plastic Deformations. Proceedings of the Estonian Academy of Sciences - Engineering, 12, 2006, 4, s.340-348

Zahr.WOS: FABIAN HIGUERA, O., ALBERTO MUNOZ, J., MARIA CABRERA, J.: Materials Science Forum, vol. 667-669, 2011, p. 713-718

JANOVEC, J. - SVOBODA, M. - KROUPA, A. - VÝROSTKOVÁ, A. : Thermal-induced evolution of secondary phases in Cr-Mo-V low alloy steels. Journal of Materials Science, 41, 2006, s.3425-3433

Scopus: HAN, L.-Z. - GU, J.-F. - PAN, J.-S.: Jinshu Rechuli/Heat Treatment of Metals, 2011, vol.36, no.11, 28-32

Zahr.WOS: SOADY, K. A. - MELLOR, B. G. - SHACKLETON, J. - MORRIS, A. - REED, P. A. S.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.29-30, 8579-8588

Zahr.WOS: LIU, Q. D. - LIU, W. Q. - ZHAO, S. J.: METALLURGICAL AND MATERIALS TRANSACTIONS A, 2011, vol.42A, no.13, 3952-3960

Zahr.WOS: LEE, JB., KANG, N., PARK, JT., AHN, ST., PARK, YD., CHOI, ID., KIM, KR., CHO, KM.: MATERIALS CHEMISTRY AND PHYSICS, 2011, vol.129, no.1-2, 365-370

MEDVECKÝ, Ľ. - KMECOVÁ, M. - SAKSL, K.: Study of PbZr0,53Ti0,47O3 Solid Solution Formation by Interaction of Perovskite Phases. Journal of the European Ceramic Society, 27, 2007, s.2031-2037

Zahr.WOS: GALASSI, C.: In Springer Series in Materials Science, 2011, vol.140, no.1, 1-37 MEDVECKÝ, Ľ. - ŠTULAJTEROVÁ, R. - BRIANČIN, J.: Study of Controlled Tetracycline Release from Porous Calcium Phosphates/Polyhydroxybutyrate Composite. Chemical Papers, 61, 2007, 6, s.477-484

Zahr.WOS: BARDAJEE, G.R. - POURJAVADI, A. - SOLEYMAN, R.: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011, vol.392, no.1, 16-24

KOVA Ľ, V. - REECE, M.J. - BUSHBY, A.: Enhanced Ferroelectric Loop Asymmetry of Lead Zirconate Titanate Thin Films under Nanoindentation. Journal of Applied Physics, 101, 2007, s.024113

Zahr.WOS: LI, W., CHEN, Z., AUCIELLO, O.: JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, vol.44, no.10

LUBE, T. - DUSZA, J.: A Silicon Nitride Reference Material - a Testing Program of ESIS TC6. Journal of the European Ceramic Society, 27, 2007, s.1203-1209

Zahr.WOS: WIPPLER, J., FUENFSCHILLING, S., FRITZEN, F., BOEHLKE, T., HOFFMANN, M.: ACTA MATERIALIA, 2011, vol.59, no.15, 6029-6038

Zahr.WOS: HÄRTELT, M. - RIESCH-OPPERMANN, H. - SCHWIND, T. - KRAFT, O.: Journal of the American Ceramic Society, 2011, vol.94, no.10, 3480-3487

Zahr.WOS: KHADER, I. - HASHIBON, A. - ALBINA, J.-M. - KAILER, A.: Wear, 2011, vol.271, no.9-10, 2531-2541

Zahr.WOS: FUENFSCHILLING, S., FETT, T., OBERACKER, R., HOFFMANN, MJ., SCHNEIDER, GA., BECHER, PF., KRUZIC, JJ.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.6, 1884-1892

SIDOR, J. - KOVÁ Č, F. - KVAČKAJ, T.: Grain Growth Phenomena and Heat Transport in Non-Oriented Electrical Steels. Acta Materialia, 55, 2007, s.1711-1722

Zahr.WOS: WANG, J., LI, J., WANG, X., MI, X., ZHANG, S.: BULLETIN OF MATERIALS SCIENCE, 2011, vol.34, no.7, 1477-1482

Zahr.WOS: RENZETTI, R. A. - SANDIM, H. R. Z. - SANDIM, M. J. R. - SANTOS, A. D. - MOESLANG, A. - RAABE, D.: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, vol.528, no.3, 1442-1447


KOLLÁROVÁ, M. - DŽUPON, M. - LEŠKO, A. - PARILÁK, Ľ.: Formation of Outburst Structure in Hot Dip Galvannealed Coatings on IF Steels. Metalurgija, 46, 2007, 1, s.9-14

Zahr.WOS: KONDRATIUK, J. - KUHN, P. - LABRENZ, E. - BISCHOFF, C.: Surface and Coatings Technology, 2011, vol.205, no.17-18, 4141-4153

HAGAROVÁ, M. - JAKUBÉCZYOVÁ, D. - VOJTKO, M.: PVD Coatings Applied on the Tool Steels. Journal of Metals, Materials and Minerals, 17, 2007, s.29-33

Zahr.WOS: WU, H., SONG, L., SUN, Y., CHEN, T.: Advanced Materials Research, vol. 314-316, 2011, p. 209-213

BIDULSKÁ, J. - KVAČKAJ, T. - BIDULSKÝ, R. - CABBIBO, M. - EVANGELISTA, E.: Effect of Low Strain Rate on Formability of Aluminium Alloy. Metalurgija, 46, 2007, 3, s.157-159

Scopus: HORSINKA, J. - KLIBER, J. - DROZD, K. - MAMUZIĆ, I.: Metalurgija, 2011, vol.50, no.2, 81-84 BESTERCI, M. - VELGOSOVÁ, O. - PEŠEK, L.: Mechanical Properties of Individual Phases, Deformation and Fracture in Mechanically Alloyed Al-Al4C3 Composite. In: International Journal of Materials and Product Technology, 28, 2007, 3/4, s.448-467

Zahr.WOS: AZARBARMAS, M. - EMAMY, M. - RASSIZADEHGHANI, J. - ALIPOUR, M. - KARAMOUZ, M.: Materials Science and Engineering A, 2011, vol.528, no.28, 8205-8211

FERDINANDY, M. - LOFAJ, F. - DUSZA, J. - ĎURIŠIN, J.: The Effect of Deposition Conditions on Texture and Wear Resistance of EB PVD TiN Coatings. Acta Metallurgica Slovaca, 13, 2007, spec.iss.1, s.144-149


CENIGA, L. : Analytical model of thermal stresses and thermal-stress induced cracking in laminar system. Acta Metallurgica Slovaca, 13, 2007, spec.iss.1, s.191-195


KVAČKAJ, T. - ZEMKO, M. - KUSKULIC, T. - KOČISKO, R. - BESTERCI, M. - DOBATKIN, S. - MOLNÁROVÁ, M.: Nanostructure Formation and Numerical Simulation of IF Steel in ECAP. High Temperature Materials and Processes, 26, 2007, 2, s.147-150

Zahr.WOS: VLADO, M BIDULSKY, R., GULOVA, L., MACHOVA, K., BIDULSKA, J., VALICEK, J., SAS, J.: HIGH TEMPERATURE MATERIALS AND PROCESSES, 2011, vol.30, no.1-2, 105-111

JÓVÁRI, P. - SAKSL, K. - PRYDS, N. - LEBECH, B. - BAILEY, N. - MELLERGARD, A. - DELAPLANE, R. - FRANZ, H.: Atomic Structure of Glassy Mg60Cu30Y10 Investigated with EXAFS, X-Ray and Neutron Diffraction, and Reverse Monte Carlo Simulations. Physical Review B, 76, 2007, s.054208

Zahr.WOS: WOCHNER, P. - CASTRO-COLIN, M. - BOGLE, SN. - BUGAEV, VN.: INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2011, vol.102, no.7, 874-888

Zahr.WOS: WANG, X. D. - LOU, H. B. - WANG, S. G. - XU, J. - JIANG, J. Z.: APPLIED PHYSICS LETTERS, 2011, vol.98, no.3

Zahr.WOS: CHENG, Y. Q. - MA, E.: PROGRESS IN MATERIALS SCIENCE, 2011, vol.56, no.4, 379-473 Zahr.WOS: LIU, D. - PAN, S. P. - QIN, J. Y. - GU, T. K.: JOURNAL OF APPLIED PHYSICS, 2011, vol.109,

no.9 DORČÁK, Ľ. - TERPÁK, J. - PETRÁŠ, I. - DORČÁKOVÁ, F. : Electronic Realization of the Fractional-Order Systems. Acta Montanistica Slovaca, 12, 2007, 3, s.231-237

Zahr.WOS: VALSA, J., DVORAK, P., FRIEDL, M.: RADIOENGINEERING, 2011, vol.20, no.3, 619-626

DORČÁK, Ľ. - TERPÁK, J. - PAPAJOVÁ, M. - DORČÁKOVÁ, F. - PIVKA, L.: Design of the Fractional-Order PI AlphaD Delta Controllers Based on the Optimization with Self-Organizing Migrating Algorithm. Acta Montanistica Slovaca, 12, 2007, 4, s.285-293

Zahr.WOS: DAS, S., SAHA, S., DAS, S., GUPTA, A.: ISA TRANSACTIONS, 2011, vol.50, no.3, 376-388 HRYHA, E. - ČAJKOVÁ, L. - DUDROVÁ, E.: Study of Reduction/Oxidation Processes in Cr-Mo Prealloyed Steels during Sintering by Continuous Atmosphere Monitoring. Powder Metallurgy Progress, 7, 2007, 4, s.181-197

Zahr.WOS: BIDULSKÝ, R., ACTIS GRANDE, M., BRYTAN, Z., ROSSO, M.: Materials Science Forum, 672, 2011, p. 293-296

Zahr.WOS: BIDULSKÝ, R. - GRANDE, M.A. - BIDULSKÁ, J.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s506-s509

Zahr.WOS: BIDULSKÝ, R., ACTIS-GRANDE, M., BIDULSKÁ, J.: High Temperature materials and Processes, vol. 30, 2011, no. 3, p. 199-203

Zahr.iné: ACTIS GRANDE, M., BIDULSKÝ, R., BIDULSKÁ, J., FORNO, I.: Euro PM 2011 congress and exhibition. Barcelona, 9.-12.10.2011. EPMA, 2011, CD

BESTERCI, M. - HVIZDOŠ, P. - SÜLLEIOVÁ, K. - EDTMAIER, Ch.: Processing, Microstructure and Creep Testing of Pt-Y2O3 Composites. Materials and Design, 28, 2007, s.2540-2543

Zahr.WOS: ZOZULYA, EV., IL'INSKII, AI., KOLUPAEV, IN.: Physics of Metals and Metallography, 2011, vol.111, no.2, 155-157

CENIGA, L. : Analytical Models of Thermal Stresses in Composite Materials I. New York : Nova Science Publishers

Zahr.WOS: SUHIR, E.: ZAMM-Zeitschrift fur Angewandte Mathematik und Mechanik, vol. 91, 2011, p. 371-385 BRUNCKOVÁ, H. - MEDVECKÝ, Ľ. - MIHALIK, J. : Effect of Sintering Conditions on the Pyrochlore Phase Content in PMN-PFN Ceramics Prepared by Sol-Gel Process. Journal of the European Ceramic Society, 28, 2008, s.123-131

Zahr.WOS: BOCHENEK, D. - GRABOWSKI, F. - NIEMIEC, P.: ARCHIVES OF METALLURGY AND MATERIALS, 2011, vol.56, no.4, 1071-1076

ŠTULAJTEROVÁ, R. - MEDVECKÝ, Ľ.: Effect of Calcium Ions on Transformation Brushite to Hydroxyapatite in Aqueous Solution. Colloids and Surfaces A, 316, 2008, s.104-109

Zahr.WOS: BAKRY, A. S. - TAKAHASHI, H. - OTSUKI, M. - SADR, A. - YAMASHITA, K. - TAGAMI, J.: JOURNAL OF DENTAL RESEARCH, 2011, vol.90, no.2, 246-250

Scopus: LIM, H.B. - KIM, C.Y.: Journal of the Korean Ceramic Society, 2011, vol.48, no.1, 26-33 Zahr.WOS: IAFISCO, M. - DELGADO-LOPEZ, J. M. - GOMEZ-MORALES, J. - HERNANDEZ-

HERNANDEZ, M. A. - RODRIGUEZ-RUIZ, I. - ROVERI, N.: CRYSTAL RESEARCH AND TECHNOLOGY, 2011, vol.46, no.8, 841-846

Zahr.WOS: ROHANIZADEH, R. - CHUNG, K.: Journal of Oral Implantology, 2011, vol.37, no.6, 659-672 Zahr.WOS: LEE, Tu - LIN, Yi Chen: CRYSTAL GROWTH & DESIGN, 2011, vol.11, no.7, 2973-2992

ŠALAK, A. - SELECKÁ, M. : Effect of Manganese Content and Manganese Carrier on Properties of Sintered and Sinter Hardened Hybrid Fe-3Cr-0,5Mo-xMn-0,24C Steel. Powder Metallurgy, 51, 2008, s.327-339


DUSZOVÁ, A. - DUSZA, J. - TOMÁŠEK, K. - BLUGAN, G.S. - KÜBLER, J.: Microstructure and Properties of Carbon Nanotube/Zirconia Composite. Journal of the European Ceramic Society, 28, 2008, s.1023-1027

Zahr.WOS: LIN, Wensong - FANG, Ningxiang - HE, Liang: NEW MATERIALS AND ADVANCED MATERIALS, PTS 1 AND 2, 2011, vol.152-153, no., 883-886

Zahr.WOS: MAZAHERI, M., MARI, D., HESABI, ZR., SCHALLER, R., FANTOZZI, G.: COMPOSITES SCIENCE AND TECHNOLOGY, 2011, vol.71, no.7, 939-945

Zahr.WOS: MAZAHERI, M., MARI, D., SCHALLER, R., BONNEFONT, G., FANTOZZI, G.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.14, 2691-2698

Zahr.WOS: GARMENDIA, N. - GRANDJEAN, S. - CHEVALIER, J. - DIAZ, L. A. - TORRECILLAS, R. - OBIETA, I.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.6, 1009-1014

JAN, V. - DORČÁKOVÁ, F. - DUSZA, J. - BARTSCH, M.: Indentation Creep of Free-Standing EB-PVD Thermal Barrier Coatings. Journal of the European Ceramic Society, 28, 2008, s.241-246

Zahr.WOS: GAN, M. - TOMAR, V.: JOM, 2011, vol.63, no.9, 27-34

STOYKA, V. - KOVÁ Č, F. - SIDOR, J.: Effect of Second Phase Particles Topology on the Onset Temperature of Abnormal Grain Growth in Fe-3%Si Steels. Metalurgija, 47, 2008, 1, s.37-41


VÝROSTKOVÁ, A. - HOMOLOVÁ, V. - PECHA, J. - SVOBODA, M.: Phase Evolution in P92 and E911 Weld Metals during Ageing. Materials Science and Engineering A, 480, 2008, s.289-298

Zahr.WOS: CAO, J., GONG, Y., YANG, ZG., LUO, XM., GU, FM., HU, ZF.: INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2011, vol.88, no.2-3, 94-98

Scopus: LIU, F.-G. - LI, T.-J. - WANG, C.-X. - LIANG, J. - LIU, L.-Y. - YAO, B. - XIAO, D.-M. - SHI, W.-Y.: Dongli Gongcheng Xuebao/Journal of Chinese Society of Power Engineering, 2011, vol.31, no.10, 803-808

Scopus: SUN, S.-L. - HE, W.-W. - ZHANG, M.-G.: Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2011, vol.18, no.6, 64-69

Zahr.WOS: CAO, J., GONG, Y., YANG, ZG.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.19-20, 6103-6111

Zahr.WOS: JIN, SX. - GUO, LP. - YANG, Z. - FU, DJ. - LIU, CS. - TANG, R. - LIU, FH. - QIAO, YX. - ZHANG, HD.: MATERIALS CHARACTERIZATION, 2011, vol.62, no.1, 136-142

Scopus: QIAO, Y. - WU, Y. - GUO, J.: Hanjie Xuebao/Transactions of the China Welding Institution, 2011, vol.32, no.1, 109-112

Scopus: LIU, F. - LI, T. - LIANG, J. - YAO, B. - WANG, C.: Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2011, vol.31, no.14, 121-126

Scopus: LIU, J.-J. - CHEN, G.-H. - YU, X.-H. - WANG, J.-Q. - HUA, J. - SONG, Y.-M. - ZHANG, T. - TANG, W.-M.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.2, 54-60

BESTERCI, M. - KOHÚTEK, I. - VELGOSOVÁ, O.: Microstructural Parameters of Dispersion Strengthened Cu-Al 2O3 Materials. Journal of Materials Science, 43, 2008, s.900-905

Scopus: ZHENG, M. - WU, F. - WU, H. - CAO, B.: Advanced Materials Research, 2011, vol.306-307, 1412-1415

Zahr.WOS: MITCA LN., ORBAN, RL., KURT, A., BRANDUSAN, L., JUMATE, N.: Analysis of RESEARCHES IN POWDER METALLURGY, 2011, vol.672, no., 331-334

Dom.WOS: EFE, GFC., ALTINSOY, I., IPEK, M., ZEYTIN, S., BINDAL, C.: KOVOVE MATERIALY-METALLIC MATERIALS, 2011, vol.49, no.2, 131-136

COUET, S. - SCHLAGE, K. - SAKSL, K. - RÖHLSBERGER, R.: How Metallic Fe Controls the Composition of its Native Oxide. Physical Review Letters, 101, 2008, s.056101

Zahr.WOS: JIMENEZ-VILLACORTA, F. - CESPEDES, E. - OCAL, C. - PRIETO, C.: APPLIED PHYSICS LETTERS, 2011, vol.98, no.10

Zahr.WOS: JIMÉNEZ-VILLACORTA, F. - PRIETO, C. - HUTTEL, Y. - TELLING, N.D. - VAN DER LAAN, G.: Physical Review B Condensed Matter and Materials Physics, 2011, vol.84, no.17

BIDULSKÁ, J. - BIDULSKÝ, R. - CENIGA, L. - KVAČKAJ, T. - CABBIBO, M. - EVANGELISTA, E.: Hot Workability Evaluation of Zr-Stabilized Aluminium alloy 2014 by means of Torsion Test. Kovové materiály, 46, 2008, s.151-155

Zahr.WOS: HEGEDUSOVÁ, L. - DUSZA, J.: Chemicke Listy, 2011, vol.105, no.14, s178-s181 DUSZOVÁ, A. - DUSZA, J. - TOMÁŠEK, K. - MORGIEL, J. - BLUGAN, G.S. - KÜBLER, J.: Zirconia/Carbon Nanofiber Composite. Scripta Materialia, 58, 2008, s.520-523

Zahr.WOS: BORRELL, A. - ROCHA, V. G. - TORRECILLAS, R. - FERNANDEZ, A.: COMPOSITES SCIENCE AND TECHNOLOGY, 2011, vol.71, no.1, 18-22

Zahr.WOS: JANG, BK., TSUDA, K., SAKKA, Y.: MATERIALS TRANSACTIONS, 2011, vol.52, no.3, 572-575

Zahr.WOS: BORRELL, A., ROCHA, VG., TORRECILLAS, R., FERNANDEZ, A.: JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, vol.94, no.7, 2048-2052

Zahr.WOS: BOCANEGRA-BERNAL, M. H. - ECHEBERRIA, J. - OLLO, J. - GARCIA-REYES, A. - DOMINGUEZ-RIOS, C. - REYES-ROJAS, A. - AGUILAR-ELGUEZABAL, A.: CARBON, 2011, vol.49, no.5, 1599-1607

Zahr.WOS: MAZAHERI, M., MARI, D., HESABI, ZR., SCHALLER, R., FANTOZZI, G.: COMPOSITES SCIENCE AND TECHNOLOGY, 2011, vol.71, no.7, 939-945

Zahr.WOS: GARMENDIA, N. - GRANDJEAN, S. - CHEVALIER, J. - DIAZ, L. A. - TORRECILLAS, R. - OBIETA, I.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.6, 1009-1014

Zahr.WOS: MAZAHERI, M., MARI, D., SCHALLER, R., BONNEFONT, G., FANTOZZI, G.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.14, 2691-2698

KOVÁ Č, F. - STOYKA, V. - PETRYSHYNETS, I.: Strain-Induced Grain Growth in Non-Oriented Electrical Steels. Journal of Magnetism and Magnetic Materials, 320, 2008, s.e627-e630


BESTERCI, M. - SÜLLEIOVÁ, K. - KVAČKAJ, T.: Fracture Micromechanisms of Cu Nanomaterials Prepared by ECAP. Kovové materiály, 46, 2008, s.309-311

Scopus: TÜRKMEN, M. - GÜNDÜZ, S: Ironmaking and Steelmaking, 2011, vol.38, no.5, 346-352 VACH, M. - KUNÍKOVÁ, T. - DOMÁNKOVÁ, M. - ŠEVC, P. - ČAPLOVIČ, Ľ. - GOGOLA, P. - JANOVEC, J.: Evolution of Secondary Phases in Austenitic Stainless Steels during Long-Term Exposures at 600, 650 and 800 C. Materials Characterization, 59, 2008, s.1792-1798

Zahr.WOS: FALAT, L. - KEPIČ, J. - VÝROSTKOVÁ, A. - SVOBODA, M. - BRZIAK, P.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s503-s505

Dom.WOS: FALAT, L. - VYROSTKOVA, A. - SVOBODA, M. - MILKOVIC, O.: KOVOVE MATERIALY-METALLIC MATERIALS, 2011, vol.49, no.6, 417-426

Zahr.WOS: GADHIKAR, AA. - SHARMA, C. P. - GOEL, D. B. - SHARMA, A.: METAL SCIENCE AND HEAT TREATMENT, 2011, vol.53, no.5-6, 293-298

DUDROVÁ, E. - KABÁTOVÁ, M. : Fractography of sintered iron and steels. Powder Metallurgy Progress, 8, 2008, no. 2, s.59-75

Zahr.WOS: LU, JZ., LUO, KY., ZHANG, L.: Key Engineering Materials, vol. 464, 2011, p. 677-680 BIDULSKÁ, J. - KVAČKAJ, T. - BIDULSKÝ, R. - ACTIS-GRANDE, M.: Influence of processing conditions on EN AW 2014 material properties and fracture behaviour. Kovové materiály, 46, 2008, s.339-344

Zahr.WOS: NOVÝ, F. - BOKŮVKA, O. - ŠKORÍK, V.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s494-s496

MEDVECKÝ, Ľ. - ŠTULAJTEROVÁ, R. - BUREŠ, R.: Structural Evaluation of Brushite/Gelatine Coatings on Graphite Substrate. Surface and Coating Technology, 203, 2009, s.3754-3762

Zahr.WOS: DEMBSKI, S. - MILDE, M. - DYRBA, M. - SCHWEIZER, S. - GELLERMANN, C. - KLOCKENBRING, T.: Langmuir, 2011, vol.27, no.23, 14025-14032

KABÁTOVÁ, M. - DUDROVÁ, E. - WRONSKI, A.S.: Microcrack Nucleation, Growth, Coalescence and Propagation in the Fatigue Failure of a Powder Metallurgy Steel. Fatigue and Fracture of Engineering Materials and Structures, 32, 2009, s.214-222

Scopus: MIRAJKAR, S.B. - GOPINATH, K. - PRAKASH, R.V.: Advanced Materials Research, 2011, vol.337, 766-769

HRYHA, E. - ZUBKO, P. - PEŠEK, L. - DUDROVÁ, E. - BENGTSSON, S.: An Application of Universal Hardness Test to Metal Powder Particles. Journal of Materials Processing Technology, 209, 2009, s.2377-2385

Zahr.WOS: NOR, S.S.M. - RAHMAN, M.M. - RAHMAN, A.T.A. - TARLOCHAN, F. - RAHMAN, H.Y.: Applied Mechanics and Materials, 2011, vol.83, 1-6

BLACH, J. - FALAT, L. - ŠEVC, P.: Fracture Characteristics of Thermally Exposed 9Cr-1Mo Steel after tensile and Inpact Testing at Room Temperature. Engineering Failure Analysis, 16, 2009, s.1397-1403

Zahr.WOS: WANG, ZX., XUE, F., JIANG, JW., TI, WX., YU, WW.: Engineering Failure Analysis, 18, 2011, s. 403-410

Dom.iné: VÝROSTKOVÁ, A., KEPIČ, J., MACKO, R., HOMOLOVÁ, V.: Materials Engineering-Materiálové inžinierstvo, vol. 18, 2011, p. 73-78

KOVAL ČÍKOVÁ, A. - DUSZA, J. - ŠAJGALÍK, P.: Thermal shock resistance and fracture toughness of Liquid-Phase-Sintered SiC-Based Ceramics. Journal of the European Ceramic Society, 29, 2009, s.2387-2394

Zahr.WOS: LIU, L., YE, F., HE, X., ZHOU, Y.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.12, 2129-2135

Zahr.WOS: NINO, A., NAKAIBAYASHI, Y., SUGIYAMA, S., TAIMATSU, H.: MATERIALS TRANSACTIONS, 2011, vol.52, no.8, 1641-1645

Scopus: ZHANG, G.-H. - ZHONG, Z.-X. - XING, W.-H.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.9, 6-9

ZUBKO, P. - PEŠEK, L. - BESTERCI, M. - VADASOVÁ, Z.: Mechanical Properties of the Particles of the Mechanically Alloyed System Al-Al4C3. Kovové materiály, 47, 2009, s.39-42

Zahr.WOS: BLÁHOVÁ, O.: Chemicke Listy, 2011, vol.105, no.14, s163-s166 BESTERCI, M. - VELGOSOVÁ, O. - IVAN, J. - HVIZDOŠ, P. - KVAČKAJ, T. - KULU, P.: In situ tensile testing in SEM of Al-Al4C3 nanomaterials. Estonian Journal of Engineering, 15, 2009, no. 4, s.247-254

Zahr.WOS: SUBRAMANIAN, J., GUAN, K., KUMA, J., GUPTA, M.: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, vol.211, no.8, 1416-1422

Zahr.WOS: NASEEM, K., YANG, YQ., LUO, X., HUANG, B., FENG, GH.: Materials Science and Engineering A, 528, 2011, 13-14, p. 4507-4515

DUSZA, J. - BLUGAN, G.S. - MORGIEL, J. - KÜBLER, J. - INAM, F. - PEIJS, T. - REECE, M.J. - PUCHÝ, V.: Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of the European Ceramic Society, 29, 2009, s.3177-3184


Scopus: PARK, Y. - CHO, K. - PARK, I. - PARK, Y.: Procedia Engineering, 2011, vol.10, 1446-1450 Zahr.WOS: MAZAHERI, M., MARI, D., HESABI, ZR., SCHALLER, R., FANTOZZI, G.: COMPOSITES

SCIENCE AND TECHNOLOGY, 2011, vol.71, no.7, 939-945 Zahr.WOS: WANG, FY., ZHU, YF., JIANG, Y., ZHANG, RP.: JOURNAL OF SOL-GEL SCIENCE AND

TECHNOLOGY, 2011, vol.58, no.3, 587-593 Zahr.WOS: WALKER, LS. - MAROTTO, VR. - RAFIEE, MA. - KORATKAR, N. - CORRAL, EL.: ACS

NANO, 2011, vol.5, no.4, 3182-3190 Zahr.WOS: SHI, Z., CHEN, S., WANG, J., QIAO, G., JIN, Z.: JOURNAL OF THE EUROPEAN CERAMIC

SOCIETY, 2011, vol.31, no.12, 2137-2143 Zahr.WOS: MAZAHERI, M., MARI, D., SCHALLER, R., BONNEFONT, G., FANTOZZI, G.: JOURNAL OF

THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.14, 2691-2698 Zahr.WOS: PORTEHAULT, D., MANEERATANA, V., CANDOLFI, C., DESCHLER, N., VEREMCHUK, I.,

GRIN, Y., SANCHEZ, C., ANTONIETTI, M.: ACS NANO, 2011, vol.5, no.11, 9052-9061 JAKUBÉCZYOVÁ, D. - HAGAROVÁ, M. - VOJTKO, M.: Evaluation of adhesion properties of thin PVD coatings applied on the substrate produced by melt and powder metallurgy. Acta Metallurgica Slovaca, 15, 2009, no. 1, s.15-22


Zahr.WOS: JANKURA, D., DRAGANOVSKÁ, D., BREZINOVÁ, J.: Chemické listy, 105, 2011, s. s542-s545 ROSENBERG, G. - BURÍKOVÁ, K. - JUHAR, Ľ.: Modifikácia pevnostno-plastických vlastností mikrolegovaných ocelí prostredníctvom tepelného spracovania. Výrobné inžinierstvo, 8, 2009, č. 3, s.49-52

Dom.iné: EVIN, E.: Acta Mechanica, 15, 2011, 2, p. 42-49 Zahr.iné: EVIN, E., VÝBOCH, J., KMEC, J.: Zeszyty naukowe Instytutu pojazdów, 2011, 4(85)

DUSZA, J. - MORGIEL, J. - TATARKO, P. - PUCHÝ, V.: Characterization of interfaces in ZrO2 - carbon nanofiber composite. Scripta Materialia, 61, 2009, s.253-256


Zahr.WOS: TAPASZTO, O. - KUN, P. - WEBER, F. - GERGELY, G. - BALAZSI, K. - PFEIFER, J. - ARATO, P. - KIDARI, A. - HAMPSHIRE, S. - BALAZSI, C.: CERAMICS INTERNATIONAL, 2011, vol.37, no.8, 3457-3461

KAŠIAROVÁ, M. - SHOLLOCK, B. - BOCCACCINI, A.R. - DUSZA, J.: Microstructure and creep behaviour of a Si3N4-SiC micronanocomposite. Journal of the American Ceramic Society, 92, 2009, s.439-444


FALAT, L. - VÝROSTKOVÁ, A. - HOMOLOVÁ, V. - SVOBODA, M.: Creep deformation and failure of E911/E911 and P92/P92 similar weld-joints. Engineering Failure Analysis, 16, 2009, s.2114-2120

Zahr.WOS: GONG, Y. - CAO, J. - JI, L. - YANG, C. - YAO, C. - YANG, Z. - WANG, J. - LUO, X.- GU, F. - QI, A.- YE, S.- HU, Z.: FATIGUE and FRACTURE OF ENGINEERING MATERIALS and STRUCTURES, 2011, vol.34, no.2, 83-96.

Zahr.WOS: WANG, X., PAN, Q., LIU, Z., ZENG, H., TAO, Y.: MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, vol.154-155, no., 1699-1704

Zahr.WOS: LEWIS, G., SHAW, KM.: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, vol.20, no.7, 1310-1314

Scopus: LIU, J.-J. - CHEN, G.-H. - YU, X.-H. - WANG, J.-Q. - HUA, J. - SONG, Y.-M. - ZHANG, T. - TANG, W.-M.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.2, 54-60

Zahr.WOS: WANG, X., PAN, Q., LIU, Z., ZENG, H., TAO, Y.: Engineering Failure Analysis, 18, 2011, s. 186-191

Scopus: LIU, F. - LI, T. - LIANG, J. - YAO, B. - WANG, C.: Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2011, vol.31, no.14, 121-126

Scopus: CHEN, G.H. - YU, X.H. - WANG, J.Q. - HUA, J. - LIU, J.J. - SONG, Y.M. - ZHANG, T. - ZHANG, J.H. - TANG, W.M.: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2011, vol.32, no.9, 89-95

ACHIMOVIČOVÁ, M. - DANEU, N. - REČNIK, A. - ĎURIŠIN, J. - BALÁŽ, P. - FABIÁN, M. - KOVÁČ, J. - ŠATKA, A.: Characterization of mechanochemically synthesized lead selenide. Chemical Papers, 63, 2009, s.562-567

Zahr.WOS: ROJAS-CHAVEZ, H. - REYES-CARMONA, F. - JARAMILLO-VIGUERAS, D.: MATERIALS RESEARCH BULLETIN, 2011, vol.46, no.10, 1560-1565

BIDULSKÝ, R. - ACTIS-GRANDE, M. - KABÁTOVÁ, M. - BIDULSKÁ, J.: Effect of varying carbon content and shot peening upon fatigue performance of prealloyed sintered steels. Journal of Materials Science and Technology, 25, 2009, s.607-609

Scopus: NOVÝ, F. - BOKŮVKA, O. - PALCEK, P. - CHALUPOVÁ, M.: Procedia Engineering, 2011, vol.10, 1408-1413

Zahr.WOS: NOVÝ, F. - BOKŮVKA, O. - ŠKORÍK, V.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s494-s496

Scopus: HADZIMA, B. - BUKOVINOVÁ, L.: Acta Metallurgica Slovaca, 2011, vol.17, no.4, 228-235 Zahr.WOS: BOKŮVKA, O. - NOVÝ, F. - MARIO, G. - MIKOVÁ, K.: Chemicke Listy, 2011, vol.105, no.16

SPEC. ISSUE, s624-s626 NAGLER, B. - SAKSL, K. : Turning solid aluminium transparent by intense soft X-ray photoionization. Nature Physics, 5, 2009, s.693-696

Scopus: BUCKSBAUM, P.H. - COFFEE, R. - BERRAH, N.: Advances in Atomic, Molecular and Optical Physics, 2011, vol.60, 239-289

Scopus: MARANGOS, J.P.: Contemporary Physics, 2011, vol.52, no.6, 551-569 Zahr.WOS: WAGENAARS, E. - WHITTAKER, D. S. - TALLENTS, G. J.: HIGH ENERGY DENSITY

PHYSICS, 2011, vol.7, no.1, 17-26 Zahr.WOS: WHITTAKER, D. S. - WAGENAARS, E. - TALLENTS, G. J.: PHYSICS OF PLASMAS, 2011,

vol.18, no.1 Zahr.WOS: DI CICCO, A., BENCIVENGA, F., BATTISTONI, A., COCCO, D., CUCINI, R., D'AMICO, F., DI

FONZO, S., FILIPPONI, A., GESSINI, A., GIANGRISOSTOMI, E. et al: DAMAGE TO VUV, EUV, AND X-RAY OPTICS , 2011, vol.8077

Zahr.WOS: FRUEHLING, U.: JOURNAL OF PHYSICS B-ATOMIC MOLECULAR AND OPTICAL PHYSICS, 2011, vol.44, no.24

Zahr.WOS: MOORE, L. R. - LYSAGHT, M. A. - NIKOLOPOULOS, L. A. A. - PARKER, J. S. - VAN DER HART, H. W. - TAYLOR, K. T.: JOURNAL OF MODERN OPTICS, 2011, vol.58, no.13, 1132-1140

Zahr.WOS: DI CICCO, A., D'AMICO, F., ZGRABLIC, G., PRINCIPI, E., GUNNELLA, R., BENCIVENGA, F., SVETINA, C., MASCIOVECCHIO, C., PARMIGIANI, F., FILIPPONI, A.: JOURNAL OF NON-CRYSTALLINE SOLIDS, 2011, vol.357, no.14, 2641-2647

Zahr.WOS: KAISER, B. - VAGOV, A. - AXT, V. M. - PIETSCH, U.: PHYSICAL REVIEW A, 2011, vol.84, no.4

Zahr.WOS: HISHIKAWA, A. - FUSHITANI, M. - HIKOSAKA, Y. - MATSUDA, A. - LIU, CN. - MORISHITA, T. - SHIGEMASA, E. - NAGASONO, M. - TONO, K. - TOGASHI, T. - OHASHI, H. -

KIMURA, H. - SENBA, Y. - YABASHI, M. - ISHIKAWA, T.: PHYS. REV. LETTERS, 2011, vol.107, no.24

Zahr.WOS: NORMAN, G. E. - SKOBELEV, I. Yu. - STEGAILOV, V. V.: CONTRIBUTIONS TO PLASMA PHYSICS, 2011, vol.51, no.5, 411-418

Zahr.WOS: DORCHIES, F. - LEVY, A. - GOYON, C. - COMBIS, P. - DESCAMPS, D. - FOURMENT, C. - HARMAND, M. - HULIN, S. - LEGUAY, P. M. - PETIT, S. - PEYRUSSE, O. - SANTOS, J. J.: PHYSICAL REVIEW LETTERS, 2011, vol.107, no.24

Zahr.WOS: KITAMURA, Hikaru: EPL, 2011, vol.94, no.2 Zahr.WOS: LOUIS, E. - YAKSHIN, A. E. - TSARFATI, T. - BIJKERK, F.: PROGRESS IN SURFACE

SCIENCE, 2011, vol.86, no.11-12, 255-294 Zahr.WOS: ARBEITER, M., FENNEL, T.: NEW JOURNAL OF PHYSICS, 2011, vol.13 Zahr.WOS: INOGAMOV, NA. - FAENOV, AY. - ZHAKHOVSKII, VV. - SKOBELEV, IY. - KHOKHLOV,

VA. - KATO, Y. - TANAKA, M. - PIKUZ, TA. - KISHIMOTO, M. - ISHINO, M. et al: CONTRIBUTIONS TO PLASMA PHYSICS, 2011, vol.51, no.4, 361-366

NELSON, A. - SAKSL, K.: Soft x-ray free electron laser microfocus for exploring matter under extreme conditions. Optics Express, 17, 2009, s.18271-18278

Zahr.WOS: PELIZZO, MG. - CORSO, AJ. - MONACO, G. - NICOLOSI, P. - SUMAN, M. - ZUPPELLA, P. - COCCO, D.: NUCLEAR INSTRUMENTS and METHODS IN PHYSICS RESEARCH SECTION A, 2011, vol.635, no., s24-S29

Zahr.WOS: LOUIS, E. - YAKSHIN, A. E. - TSARFATI, T. - BIJKERK, F.: PROGRESS IN SURFACE SCIENCE, 2011, vol.86, no.11-12, 255-294

Zahr.WOS: SVETINA, C., SOSTERO, G., SERGO, R., BORGHES, R., CALLEGARI, C., D'AMICO, F., BENCIVENGA, F., MASCIOVECCHIO, C., DI CICCO, A., COCCO, D.: NUCLEAR INSTRUMENTS and METHODS IN PHYSICS RESEARCH SECTION A, 2011, vol.635, no., s12-S15

KRÁĽ, J. - FERDINANDY, M. - KOTTFER, D. - MAŇKOVÁ, I. - CENIGA, L. : Tribological and refractory properties of TiAl3 intermetallic alloy. Surface Review and Letters, 16, 2009, no. 4, s.623-629

Zahr.WOS: KIANICOVA, M., SLAMECKA, K., POKLUDA, J.: In METAL 2011: 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2011, vol., no., 840-846

HRUBOVČÁKOVÁ, M. - DUDROVÁ, E.: Thermodynamic and experimental study of role of temperature and graphiteadditions on oxide reduction during sintering astaloy CRL. Acta Metallurgica Slovaca, 15, 2009, no. 4, s.248-254

Zahr.WOS: BIDULSKÝ, R., ACTIS GRANDE, M., BRYTAN, Z., ROSSO, M.: Materials Science Forum, 672, 2011, p. 293-296




KOLLÁR, P. - FÜZER, J. - BUREŠ, R. - FÁBEROVÁ, M. : AC magnetic properties of Fe-based composite materials. IEEE Transactions on Magnetics, 46, 2010, no. 2, s.467-470

Zahr.WOS: PERIGO, E. A. - NAKAHARA, S. - PITTINI-YAMADA, Y. - DE HAZAN, Y. - GRAULE, T.: JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2011, vol.323, no.15, 1938-1944

HEGEDUSOVÁ, L. - KAŠIAROVÁ, M. - CSEHOVÁ, E. - DUSZA, J.: Effect of the specimen size on strength of Si3N4+SiC composite. Journal of the European Ceramic Society, 30, 2010, s.1059-1065

Zahr.WOS: SURESH KUMAR, R. - SIVAKUMAR, D. - VENKATESWARLU, K. - GANDHI, A.S.: Scripta Materialia, 2011, vol.65, no.9, 838-841

BRUNCKOVÁ, H. - KABÁTOVÁ, M. - DUDROVÁ, E.: The effect of iron phosphate, alumina and silica coatings on the morphology of carbonyl iron particles. Surface and Interface Analysis, 42, 2010, s.13-20

Zahr.WOS: SONODA, K., TEIRIKANGAS, M., JUUTI, J., MORIYA, Y., JANTUNEN, H.: Journal of Magnetism and Magnetic Materials, 323, 2011, p. 2281-2286

HRYHA, E. - GIERL, C. - NYBORG, L. - DANNINGER, H. - DUDROVÁ, E.: Surface composition of the steel powders pre-alloyed with manganese. Applied Surface Science, 256, 2010, s.3946-3961


Zahr.WOS: KIM, D., SAH, I., KIM, D., RYU, WS., JANG, C.: OXIDATION OF METALS, 2011, vol.75, no.1-2, 103-119


Zahr.WOS: MATERAZZI, S. - VECCHIO, S.: APPLIED SPECTROSCOPY REVIEWS, 2011, vol.46, no.4, 261-340

DOBEŠ, F. - MILIČKA, K. - BESTERCI, M. - KVAČKAJ, T.: The influence of ECAP on the small punch creep of Al-4 vol% Al4C3 composite. Journal of Materials Science, 45, 2010, s.5171-5176

Zahr.WOS: CINTAS, J. - CUEVAS, F. G. - MONTES, J. M. - CABALLERO, E. S. - HERRERA, E. J.: MATERIALS SCIENCE AND ENGINEERING A, 2011, vol.528, no.28, 8286-8291

LOJANOVÁ, Š. - TATARKO, P. - CHLUP, Z. - HNATKO, M. - DUSZA, J. - LENČÉŠ, Z. - ŠAJGALÍK, P.: Rare-earth element doped Si3N4/SiC micro/nano-composites-RT and HT mechanical properties. Journal of the European Ceramic Society, 30, 2010, s.1931-1944

Zahr.WOS: SUN, W. Z. - CHEN, Y. H. - WU, L. E. - LU, Y. J. - JIANG, Y. - HUANG, Z. K.: JOURNAL OF MATERIALS SCIENCE, 2011, vol.46, no.19, 6273-6276


Scopus: SUN, W. - CHEN, Y. - HUANG, Z. - WU, L. - JIANG, Y.: Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2011, vol.39, no.10, 1536-1540

Zahr.WOS: STREHLER, C. - PARLINSKA-WOJTAN, M. - BLUGAN, G. - SPEISSER, B. - EHRLE, B. - ANEZIRIS, C. G. - GRAULE, T. - KUEBLER, J.: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, vol.31, no.14, 2711-2719

HAGAROVÁ, M. - VOJTKO, M. - JAKUBÉCZYOVÁ, D. : Analýza odolnosti PVD vrstiev v tribologických podmienkach pri zvýšenej teplote. Koroze a ochrana materiálu, 54, 2010, no. 2, s.45-50

Zahr.WOS: BREZINOVÁ, J., VIŇÁŠ, J., GUZANOVÁ, A.: Chemické listy, 105, 2011, s. s574-s576 LOFAJ, F. - NĚMEČEK, J. - BLÁHOVÁ, O.: A comparative study of nanoindentation measurements on thin coatings. Chemické listy, 104, 2010, s.s271-s274

Zahr.WOS: DŽUPON, M. - GAJDOŠ, M. - JURKO, J. - FERDINANDY, M. - JAKUBECZYOVÁ, D.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s606-s608

KOČIŠKO, R. - ZUBKO, P. - ĎURIŠIN, J. - MOLNÁROVÁ, M. - KOVÁČOVÁ, A. - KVAČKAJ, M. - BACSÓ, J.: The mechanical properties changes of OFHC copper after ECAP processing. Chemické listy, 104, 2010, s.s330-s333

Zahr.WOS: BIDULSKÁ, J. - KVAČKAJ, T. - BIDULSKÝ, R. - GRANDE, M.A. - LITYŃSKA-DOBRZYŃSKA, L. - DUTKIEWICZ, J.: Chemicke Listy, 2011, vol.105, no.16 SPEC. ISSUE, s471-s473

KUPKOVÁ, M. - JAKUBÉCZYOVÁ, D. - HAGAROVÁ, M.: On the use of fractal geometry concepts for evaluating the tribological properties of thin layers deposited by PVD method. In: Metalurgija, 49, 2010, no. 3, s.203

Dom.iné: EGRI, M., BREZINOVÁ, J., MALEJČÍK, J.: Transfer inovácií, 20, 2011, s. 99-103 Zahr.iné: BREZINOVÁ, J.: Povrchová úprava, 2011, Listopad, s. 4-7

JAKUBÉCZYOVÁ, D. - HAGAROVÁ, M. - DŽUPON, M.: Application of modern PVD layers onto cutting tools produced by powder metallurgy. In: Metalurgija, 49, 2010, no. 3, s.202

Zahr.iné: MONKA, P., MONKOVÁ, K.: Total quality management - advanced and intelligent approaches. 6th international working conference. Belgrade, 7.-11.6.2011, p. 393-396

JAKUBÉCZYOVÁ, D. - HVIZDOŠ, P. - HAGAROVÁ, M. - KUPKOVÁ, M. : Vplyv teploty na tribologické charakteristiky tenkých vrstiev deponovaných na podklade vyrobenom práškovou metalurgiou. In: Vrstvy a povlaky 2010. 9. Ročník konferencie. Rožnov pod Radhoštěm, 4.-5.10.2010. Trenčín : Miloš Vavrík 2010, s.115-119

Zahr.WOS: BREZINOVÁ, J., VIŇÁŠ, J., GUZANOVÁ, A.: Chemické listy, 105, 2011, s. s574-s576 HRYHA, E. - DUDROVÁ, E. - NYBORG, L.: Critical aspects of alloying of sintered steels with manganese. Metallurgical and Materials Transactions A, 41, 2010, s.2880-2897



TATARKO, P. - KAŠIAROVÁ, M. - DUSZA, J. - MORGIEL, J. - ŠAJGALÍK, P. - HVIZDOŠ, P.: Wear resistance of hot-pressed Si3N4/SiC micro/nanocomposites sintered with rare-earth oxide additives. Wear, 269, 2010, s.867-874

Zahr.WOS: GORYANY, V., WAGNER, R.: MATERIALS TESTING, 2011, vol.53, no.11-12, 748-757 Zahr.WOS: SHIN, JH., KUMAR, B. Venkata Manoj, KIM, JH., HONG, SH.: JOURNAL OF THE AMERICAN

CERAMIC SOCIETY, 2011, vol.94, no.11, 3683-3685 STOYKA, V. - KOVÁ Č, F. - STUPAKOV, O. - PETRYSHYNETS, I.: Texture evolution in Fe-3% Si steel treated under unconventional annealing conditions. Materials Characterization, 61, 2010, s.1066-1073

Zahr.WOS: GUO, W. - MAO, W.-M. - LI, Y. - AN, Z.G.: Materials Science and Engineering A, 2011, vol.528, no.3, 931-934


Zahr.WOS: YANG, H. - TANG, G. - LI, Y. - LI, J. - HIU, Y. - ZHANG, Y.: Advanced Materials Research, 2011, vol.284-286, 1180-1183

HVIZDOŠ, P. - PUCHÝ, V. - DUSZOVÁ, A. - DUSZA, J.: Tribological behavior of carbon nanofiber-zirconia composite. Scripta Materialia, 63, 2010, s.254-257

Zahr.WOS: FUKUDA, H., KONDOH, K., UMEDA, J., FUGETSU, B.: MATERIALS CHEMISTRY AND PHYSICS, 2011, vol.127, no.3, 451-458


SELECKÁ, M. - ŠALAK, A. : Industrial sintering of hybrid low-carbon 3Cr-0,5 Mo-xMn steels. International Journal of Powder Metallurgy, 46, 2010, s.29-42



GAVENDOVÁ, P. - KOVÁ Č, F. - STOYKA, V. - PETRYSHYNETS, I. - KVAČKAJ, T.: Effect of temper rolling on the strain hardening of a non-oriented electrotechnical steel. Acta Metallurgica Slovaca, 16, 2010, no. 3, s.181-185

Zahr.WOS: KOČIŠKO, R. - BACSÓ, J. - BIDULSKÁ, J. - KOVÁČOVÁ, A. - BELLA, P. - MOLNÁROVÁ, M.: Chemicke Listy, 2011, vol.105, no.17, s822-s823

ROSSO, M. - DUDROVÁ, E. - ACTIS-GRANDE, M. - BIDULSKÝ, R.: Wear Characteristics of Vacuum Sintered Steels. Materials Science Forum, 672, 2011, s.17-22

Scopus: SHATSOV, A.A. - RYAPOSOV, I.V. - LARININ, D.M.: Advances in Tribology, 2011 PAVLOVIC, N. - KOVA Ľ, V. - DUSZA, J. - SRDIC, V.: Effect of Ce and La substitution on dielectric properties of bismuth titanate ceramics. Ceramics International, 37, 2011, s.487-492

Zahr.WOS: ROY, M. - BALA, I. - BARBAR, S.K. - JANGID, S. - DAVE, P.: Journal of Physics and Chemistry of Solids, 2011, vol.72, no.11, 1347-1353

Zahr.WOS: CHAKRABARTI, A. - BERA, J.: PHYSICA B-CONDENSED MATTER, 2011, vol.406, no.14, 2891-2897

Zahr.WOS: MAMATHA, B. - SURESH, M. B. - JAMES, A. R. - VITHAL, M. - SARAH, P.: PHYSICA SCRIPTA, 2011, vol.84, no.5

JAKUBÉCZYOVÁ, D. - HVIZDOŠ, P. - HAGAROVÁ, M. - DŽUPON, M.: Testovanie tenkých PVD povlakov deponovaných na PM rýchloreznú oceľ. Chemické listy, 105, 2011, s.s618-s620

Dom.iné: MONKOVÁ, K., MONKA, P.: Proceedings in Manufacturing Systems, 6, 2011, 1, p. 49-52 FALAT, L. - KEPIČ, J. - VÝROSTKOVÁ, A. - SVOBODA, M. - BRZIAK, P.: Štruktúra a žiarupevnosť rovnorodých a nerovnorodých zvarových spojov ocele T92. Chemické listy, 105, 2011, s.s503-s505

Dom.iné: MICHEĽ, J., BURŠÁK, M., VOJTKO, M.: Materials Engineering-Materiálové inžinierstvo, vol. 18, 2011, p. 57-62

JURKO, J. - DŽUPON, M. - PANDA, A. - GAJDOŠ, M. - PANDOVÁ, I.: Deformácia materiálu pod obrobeným povrchom pri výrobe dier vŕtaním do austenitickej nehrdzavejúcej ocele. Chemické listy, 105, 2011, s.s600-s602

Dom.iné: MARTINKOVIČ, M.: Team 2011. 3rd international scientific and expert conference of the international TEAM society. Trnava, 19.-21.10.2011

Dom.iné: POKORNÝ, P., PETERKA, J., VÁCLAV, Š.: Team 2011. 3rd international scientific and expert conference of the international TEAM society. Trnava, 19.-21.10.2011

Zahr.WOS: MAŠČENIK, J. - GAŠPÁR, S.: Advanced Materials Research, 2011, vol.314-316, 1944-1947 PANDA, A. - JURKO, J. - DŽUPON, M. - PANDOVÁ, I.: Optimalizácia tepelného spracovania ložiskových krúžkov s cieľom eliminovať deformácie materiálu. Chemické listy, 105, 2011, s.s459-s461

Zahr.WOS: MAŠČENIK, J. - GAŠPÁR, S.: Advanced Materials Research, 2011, vol.314-316, 1944-1947 Dom.iné: GAJDOŠ, M., ZABOROWSKI, T.: Team 2011. 3rd international scientific and expert conference of

the international TEAM society. Trnava, 19.-21.10.2011 KAŠIAROVÁ, M. - HVIZDOŠ, P. - TATARKO, P. - DUSZA, J.: Influence of the addition of SiC nanoparticles on the hardness and elastic modulus of Si3N4 composites measured by indentation method. Chemické listy, 105, 2011, s.s816-s817

Zahr.WOS: MENCIK, J.: CHEMICKE LISTY, 2011, vol.105, s680-s683 BIDULSKÝ, R. - ACTIS-GRANDE, M. - KABÁTOVÁ, M. : Improved fatigue resistance of sintered steels via local hardening. Chemické listy, 105, 2011, s.s159-s162

Scopus: SHATSOV, A.A. - RYAPOSOV, I.V. - LARININ, D.M.: Advances in Tribology, 2011

citacie2011147.213.194.5/documents/1-695-citacie2011.pdf · 2013. 3. 26. · 2011 Šalak, a. -...

Documents