cimarron cl1 & cl1s brochure - whiteway€™s most popular area site lighting fi xture delivers...
TRANSCRIPT
B a c k l i g h t C o n t r o l
Due to our continued eff orts to improve our products, product specifi cations are subject to change without notice. ©2013 HUBBELL LIGHTING – SPDCL1/CL2LED POD REV4/13
High Performance LEDArea/Site Lighting
DIE-CAST ARCHITECTURAL LUMINAIRES
Hubbell Lighting, Inc.
2 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 3
DIE-CAST ARCHITECTURAL LUMINAIRES
P R E C I S I O N O P T I C STYPE II TYPE III TYPE IV TYPE V WIDE TYPE V SHORT TYPE V MEDIUM Individual optical lenses
designed to distribute light where it is needed for Type II, III, IV and V lighting distributions.
Two Sizes – Endless Possibilities
HID LED
A P P L I C AT I O N G U I D E L I N E S
L E D D E S I G N A N D P E R F O R M A N C E P L U S B A C K L I G H T C O N T R O LThe Cimarron LED family of luminaires are manufactured with industry leading optics to distribute light where it is specifically needed for area/site, pedestrian, parking lot and pathway applications. Cimarron LED luminaires deliver the following advantages over traditional lighting sources:
❚ Energy-effi ciency – lower operating costs
❚ Superior light level uniformity – improved visual acuity
❚ Improved pole and fi xture spacing – reduces installation costs
❚ Long source life – reduces maintenance costs
❚ Near maintenance free operation
❚ Enhanced control options for increased energy savings and customized lighting
ECL1PSE Backlight ControlFor those LED projects that require minimal light behind the pole, Spaulding Lighting has a solution – ECL1PSE Backlight Control. This unique system, designed specifi cally for LED lighting, will reduce the light spill behind the pole.
❚ Reduce light 85% behind the pole – industry leading performance
❚ No change to fi xture appearance or EPA
❚ Achieves impressive Backlight-Uplight-Glare (BUG) rating
❚ Neighbor-friendly lighting
❚ 2012 IES Progress Report Award winner
Type IV with Backlight Control Type IV without Backlight Control
Spaulding Lighting’s most popular
LED area/site lighter is now available
in two sizes. Built for superior LED
performance and packed with
features, the original Cimarron CL1
and the smaller CL1S pedestrian
scale luminaires provide a perfect
balance of design, form, function and
energy-effi ciency.
Spaulding LED CL1S is designed for pedestrian scale applications such as municipal, parks and recreation, school and healthcare campuses. Typical mounting heights are from 12-20ft.
Spaulding LED CL1 is designed for area/site lighting applications including parking, auto dealer-ships, retail and large parking areas. Typical mounting heights are from 18-40ft.
O P T I C A L C O N F I G U R AT I O N S
4 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 5
• 10-18 ft mounting heights• 3,500 lumens• 97 LPW effi ciency
• 12-18 ft mounting heights• 6,800 lumens• 97 LPW effi ciency
• 15-20 ft mounting heights• 11,000 lumens• 101 LPW effi ciency
Spaulding Lighting’s Cimarron LED CL1S pedestrian scale
luminaire is ideally suited for mounting heights up to 20ft
and is available in 54 optical confi gurations.
Unique DesignIntegral arm is part of
the Cimarron LED CL1S sleek
design. Coupled with the easy to
install adapter plate make this
luminaire a win-win for ease of
installation and servicing.
High Brightness LED TechnologyDesign fl exibility is optimized with 16, 32 and 48 high
brightness LED light engine confi gurations in IES Type
II, III, IV and V distributions with factory rotatable optics
available for Type II, III and IV distributions
Quick-Mount InstallationThe Cimarron CL1S installation features:
Quick-mount plate attaches to pole with two 3/4” bolts
4 - slot hex 1/4” captured screws secure luminaire door to top
Safety-latch holds luminaire door to prevent “free swing” door
Two stage hinge mechanism built into integral arm
Quick-connect wiring for a simplifi ed, hassle-free installation
For more information on the Cimarron LED CL1S use your smart phone to scan this code
PEDESTRIAN SCALE ARCHITECTURAL LUMINAIRE
16
32
48Control ReadyThe Cimarron LED CL1S uses less than 50% of the energy
of an equivalent HID at full brightness. Additional
energy-saving options include:
• wiHUBB in-fi xture wireless control module (antenna shown)
• Continuous Dimming – lowers energy consumption and light output from 100% to 10% with a 0-10V input (dimmable drivers standard)
• Sensor control option for 30%, 50% or 70% light output and energy savings for off peak activity hours
1 2 3
4 5
1
2
4
5
3
1
O P T I C A L C O N F I G U R AT I O N S
DIE-CAST ARCHITECTURAL LUMINAIRE
6 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 7
• 12-18 ft mounting heights • Single light engine• 7,000 lumens• 101 LPW effi ciency
• 18-25 ft mounting heights• Two light engines • 13,000 lumens• 95 LPW effi ciency
• Up to 40 ft mounting heights• Three light engines • 27,000 lumens• 98 LPW effi ciency
Spaulding’s most popular area site lighting fi xture delivers energy effi ciency,
safety and security. Ready to meet today’s outdoor site lighting needs – Cimarron
LED features high brightness LEDs, providing superior optical performance while
reducing energy consumption and lowering maintenance costs. Cimarron LED –
a perfect balance of design, form, function and effi ciency.
Unique DesignKeeping the same sleek profi le and aesthetic
lines as the HID generation, the Cimarron LED
incorporates a unique vertically-fi nned die-cast
housing that optimizes heat transfer to keep
the fi xture cool and maximize component life.
Choose from traditional straight, architectural
upswept die-cast aluminum arm designs or
optional mast fi tter. The arm is shipped installed
to the fi xture for ease of installation. Fixture
installation and supply wire connections are
made through the wiring access door located in
the arm, so there is no need to open the fi xture
during installation.
Maintenance Free - Vandal ResistantThe Cimarron LED will perform virtually maintenance-free. In
addition to the unique housing designed to reduce unwanted
collection of debris, the fi xture is designed to IP65 and providing
long life – there is no need to touch it for many years. Addition-
ally, Hubbell Lighting’s durable Lektrocote® TGIC thermoset
polyester powder paint fi nish assures long life and maintenance-
free service. Optional vandal resistant guard provides additional
protection when necessary.
High brightness LED technologyDesign fl exibility is optimized with 72 high brightness
LED light engine confi gurations in IES Type II, III, IV and
V distributions. Ideal for mounting heights from 12 ft
to 40 ft.
Control ReadyThe Cimarron LED uses less than 50% of the energy of
an equivalent HID at full brightness. Additional
energy-saving options include:
• wiHUBB in-fi xture wireless control module
• Bi-Level Control – 2 circuits allow for half of the LEDs to be turned off during off -peak hours
• Continuous Dimming – lower energy consumption and light output from 100% to 10% with a 0-10V input
• Sensor control option for 30%, 50% or 70% light output and energy savings for off peak activity hours
For more information on the Cimarron LED use your smart phone to scan this code
ORDERING INFORMATION
Series CCT Distribution DriveCurrent
ColorVoltage OptionsNumber of LEDs
Mounting
SERIESCL1S Cimarron LED Pedestrian Scale MOUNTINGA 4” Straight arm attached to housing complete with quick-mount plate
NUMBER OF LEDS 16L 16 High brightness LEDs32L 32 High brightness LEDs48L 48 High brightness LEDs
VOLTAGEU3 Universal 120V-277V, 50/60 Hz11 120V21 208V31 240V41 277V5 480V, 60 HzF 347V, 60 HzE4 220V, 50 Hz CCT3K 3000K, 80 CRI4K 4200K, 70 CRI5K 5100K, 67 CRIAM Amber available for “Turtle friendly” applications (pending, consult factory)
DISTRIBUTION2 Type II3 Type III4 Type IV5M Type V Medium5S Type V Short5W Type V Wide2L Type II Rotated 90˚ left3L Type III Rotated 90˚ left4L Type IV Rotated 90˚ left2R Type II Rotated 90˚ right3R Type III Rotated 90˚ right4R Type IV Rotated 90˚ right(see page 9 for assistance in selecting rotated optics) DRIVE CURRENT Leave blank for 700mA (standard) COLORDB Dark Bronze BL Black WH White GR Gray PS Platinum Silver RD Red (premium color)FG Forest Green (premium color)CC Custom Color (premium color)
OPTIONSBC5 Backlight controlCD2,7 Continuous dimmingF(X)3,4 Fusing (replace X with voltage: 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V)RPA3 3” Round pole adapterRPA4 4” Round pole adapterTB Terminal blockWB Wall bracketWHB6 White LED bezel CONTROL OPTIONSSC0 Motion control, no light output/ On-Off controlSC30 Motion control, dimmed to 30% light outputSC50 Motion control, dimmed to 50% light outputSC70 Motion control, dimmed to 70% light outputPR(X) NEMA Photo cell receptacle (replace X with voltage: U=120-277, 5=480, 6 =347)WIH2,8 In fixture wireless control module (consult factory)1 Select only when using voltage specific options F, WIH2 CD & WIH cannot be combined3 Fuse option not available with U voltage4 Select F3 fusing option for 220V5 Not recommended for Type 5S, 5M or 5W6 Order to match larger Cimarron CL1 with white bezels7 Dimming leads accessible for connection to third party dimming systems8 Only available with 120V or 277V input
ORDERING EXAMPLE
CL1S - A - 48L U - 5K - 3 - - DB - RPA3
SURGE PROTECTIONTo protect your investment, the Cimarron LED area lighter is protected from electrical surges up to 10KA
LISTINGS AND RATINGS• Listed to UL1598 for use in wet locations• DesignLights Consortium qualified• IP65• -30˚C to 40˚C Ambient temperature rating
8 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
FIXTURE DIMENSIONS
A B C D E F G H EPA Weight
12" 305mm
16.312"414mm
4"102mm
4.5"114mm
3"76mm
20.312"515mm
4.13"105mm
5.625"143mm
.45 ft2
.14 m2
19 lbs.8.62 kg
LEKTROCOTE® FINISH PROCESSLektrocote® is a proprietary process where the thermosetting, acid-
functional polyester powder resin is electrostatically applied only after
a thorough cleaning process. Luminaires receive a five-step wash
with both acid and alkaline-based liquid cleaners followed by the
deposit of a thin layer of proprietary compound to promote maxi-
mum corrosion-resistance and paint adhesion. Finally, the decorative
finish coat is applied.
Lektrocote® meets or exceeds the following standards:
ASTM B-117 1000 hour salt spray test
ASTM B-2247 1000 hour humidity test
ASTM D-2794 Impact test resistant to 160 inch pounds
ASTM D-522 Flexibility test
AAMA 603 Blister/adhesion test
COLOR SELECTIONS• 5 standard (Bronze, Black, White, Gray, Platinum Silver)
• 2 premium (Red, Forest Green) and Custom Colors (consult factory) are available
Note: • Actual colors may vary due to printing process
• All colors are textured except Platinum Silver and Red
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 9
CIMARRON ACCESSORIES Catalog # Description CL1S-RPA3-XX1 Round pole adapter for (31⁄4 - 33⁄4”)CL1S-RPA4-XX1 Round pole adapter for (37⁄8 - 41⁄2”)WB-CR-XX Wall bracket
ACCESSORIES
ADDITIONAL ACCESSORIES Catalog # DescriptionPTL-1 Photocontrol - twist-lock cell (120V) PTL-8 Photocontrol - twist-lock cell (120-277V) PTL-5 Photocontrol - twist-lock cell (480V) PTL-6 Photocontrol - twist-lock cell (347V) PSC Shorting cap - twist-lock 1 Replace XX with color choice, eg.: DB for Dark Bronze
TENON TOP POLE BRACKET ACCESSORIES (ORDER SEPARATELY) Catalog # Description EPA WEIGHTSETA-XX1 4” Square pole top tenon adapter 0.4 ft2 20 lbs. 2 3/8” OD slipfitter for max. four fixtures (90°) 0.04 m2 9 kgs.
RETA-XX1 4” Round pole top tenon adapter. 2 3/8” OD 0.2 ft2 20lbs. slipfitter for max. four fixtures (90°) 0.02 m2 9 kgs. TETA-XX1 Three sided pole top tenon adapter 0.2 ft2 20lbs. 2 3/8” OD slipfitter for max. three fixtures 0.02 m2 9 kgs. (120°)
SETA-XX TETA-XXRETA-XX
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
4" 4" 5.5"
9.5" 9.5" 9.5"
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
A
B B
C
EED D
A
C
LUMEN TABLELIGHT INPUT WATTS DELIVERED LUMENS
Engine 120V-277V 347V-480V Type 2 Type 3 Type 4 Type 5M Type 5S Type 5W16L-5K 39w 3053 3075 3113 3731 3457 3166
32L-5K 76w 6527 6574 6654 7327 7391 6704
48L-5K 111w 9864 9935 10056 11073 11169 10132
16L-4K 39w 3077 3099 3136 3454 3484 3160
32L-4K 76w 6042 6085 6159 6782 6841 6206
48L-4K 111w 9131 9593 9309 10250 10339 9379
16L-3K 39w 2438 2456 2486 2737 2761 2725
32L-3K 76w 4788 4823 4881 5375 5422 4918
48L-3K 111w 7236 7288 7377 8123 8193 9662
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
G
F
H
5.6254.130
20.312
5.625
16.312
3.000
4.500
12.000
16.3124.000
3.000
3.000
4.000 16.312
4.130
12.000
4.500
12.000
G
E
FIXTURE MOUNTING Square & Round
CAST ADAPTER
CAST ARMFIXTURE
POLE COVER POLE COVER
POLE TOP
.875
Ø .875 HOLE
2.25
3.5
Ø .563 2 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
CAST ADAPTER
CAST ARMFIXTURE
POLE COVER POLE COVER
POLE TOP
.875
Ø .875 HOLE
2.25
3.5
Ø .563 2 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
CAST ADAPTER
CAST ARMFIXTURE
POLE COVER POLE COVER
POLE TOP
.875
Ø .875 HOLE
2.25
3.5
Ø .563 2 HOLES
ROUND POLE
SQUARE POLE
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
QUICK-MOUNT PLATE
QUICK-MOUNTPLATE
SET SCREW
.579
2.625
4.9624.962
.875
MOUNTINGBOLTS
3.5
FIXTURE MOUNTING Factory Rotated Optics
2L Type II rotated 90˚ left3L Type III rotated 90˚ left4L Type IV rotated 90˚ left
2R Type II rotated 90˚ right3R Type III rotated 90˚ right4R Type IV rotated 90˚ right
For proper light distribution and performance, rotated optics must be mounted as referenced in illustration. Consult instruction sheet included when mounting.
PENDINGLED Product Partner
LUMEN TABLELIGHT INPUT WATTS DELIVERED LUMENS
Engine 120V-277V 347V-480V Type 2 Type 3 Type 4 Type 5M Type 5S Type 5W30L-5K 70 87 6384 6164 6641 7108 6999 6619
60L-5K 140 157 13300 12842 13125 13185 13675 12954
90L-5K 210 227 19684 19006 19202 20592 19610 18973
90L-5K-105 336 363 26974 25351 26548 25793 27445 25195
30L-4K 70 87 6089 6109 6104 6417 6439 6046
60L-4K 140 157 11583 11468 12036 12038 12581 11807
90L-4K 210 227 17143 16973 17648 18521 20220 17394
90L-4K-105 336 363 23896 23912 24199 24583 25357 23128
30L-3K 70 87 4606 4668 4686 4858 4902 4601
60L-3K 140 157 9013 9175 9216 9409 9461 8844
90L-3K 210 227 13360 13601 13575 13923 14004 13902
90L-3K-105 336 363 17645 17612 17469 17950 18271 17330
COVER
CAST ADAPTER
CAST ADAPTER
THREADED ROD GASKET
FLAT WASHER
SCREW COVER
LOCKWASHER HEX NUT
RETAINER WASHER
ARM
CAST ARM FIXTURE
TO HOUSING (3-HOLE PATTERN END)
SQUARE POLE COVER
POLE COVER POLE COVER
POLE TOP
.875
Ø .875 HOLE
2.25
3.5
Ø .563 2 HOLES
ROUND POLE
ROUND POLE
SQUARE POLE
SQUARE & ROUND POLES UPSWEPT ARM MOUNTSQUARE & ROUND POLES
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
NUT PLATE
SQUARE POLE
ORDERING INFORMATION
Series CCT Distribution DriveCurrent
ColorVoltage OptionsNumber of LEDs
Mounting
LEKTROCOTE® FINISH PROCESSLektrocote® is a proprietary process where the thermosetting, acid-
functional polyester powder resin is electrostatically applied only after
a thorough cleaning process. Luminaires receive a five-step wash
with both acid and alkaline-based liquid cleaners followed by the
deposit of a thin layer of proprietary compound to promote maxi-
mum corrosion-resistance and paint adhesion. Finally, the decorative
finish coat is applied.
Lektrocote® meets or exceeds the following standards:
ASTM B-117 1000 hour salt spray test
ASTM B-2247 1000 hour humidity test
ASTM D-2794 Impact test resistant to 160 inch pounds
ASTM D-522 Flexibility test
AAMA 603 Blister/adhesion test
COLOR SELECTIONS• 5 standard (Bronze, Black, White, Gray, Platinum Silver)
• 2 premium (Red, Forest Green) and Custom Colors (consult factory) are available
Note: • Actual colors may vary due to printing process
• All colors are textured except Platinum Silver and Red
ORDERING EXAMPLE
CL1 - A - 90L U - 5K - 3 - 105 - DB - WIH
SURGE PROTECTIONTo protect your investment, the Cimarron LED area lighter is protected from electrical surges up to 10KA
LISTINGS AND RATINGS• Listed to UL1598 for use in wet locations• IP65• -30˚C to 40˚C Ambient temperature rating• DesignLights Consortium qualified
CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S – 11 10 – CIMARRON D I E - C A S T A R C H I T E C T U R A L L U M I N A I R E S
FIXTURE DIMENSIONS
A B C D E F G EPA Weight
6 3/4" 171mm
21 3/4"552mm
16"406mm
6 5/8"168mm
6 5/16"160mm
5 5/8"143mm
6 1/8"155mm
1.3 ft2
.12m2
45 lbs.20.4 kg
Upswept Arm
Straight Arm
A
A
B
B C
D
E
F
G
CIMARRON ACCESSORIES Catalog # Description CR-RPA3-XX1 Round pole adapter for straight arm (31⁄4 - 33⁄4”)CR-RPA4-XX1 Round pole adapter for straight arm (37⁄8 - 41⁄2”)CR-RPA5-XX1 Round pole adapter for straight arm (5”)CR-RPA6-XX1 Round pole adapter for straight arm (6”)CRD-RPA2-XX1 Round pole adapter for upswept arm (23⁄4 - 31⁄8”)CRD-RPA3-XX1 Round pole adapter for upswept arm (31⁄4 - 33⁄4”)CRD-RPA4-XX1 Round pole adapter for upswept arm (37⁄8 - 41⁄2”)CRD-RPA5-XX1 Round pole adapter for upswept arm (5”)CRD-RPA6-XX1 Round pole adapter for upswept arm (6”)WB-CR-XX1 Wall bracketTPLB-XX1 Twin parallel luminaire bracketMAF-CL-XX2 Horizontal mast arm fitter for 2 3/8” OD arm. Mounts to standard 6” arm (ordered with fixture)
ACCESSORIES
ADDITIONAL ACCESSORIES Catalog # DescriptionPTL-1 Photocontrol - twist-lock cell (120V) PTL-8 Photocontrol - twist-lock cell (120-277V) PTL-5 Photocontrol - twist-lock cell (480V) PTL-6 Photocontrol - twist-lock cell (347V) PSC Shorting cap - twist-lock
MOUNTING ACCESSORIES Catalog # Description EPA WEIGHTARM-CL-K-TA-XX1 Adjustable mounting arm for single – 5 lbs. fixture (2-3/8 tenon) 2.3 kgs.ARM-CL-TK-TA-XX1 Adjustable mounting arm for two – 7 lbs. fixtures at 180˚ (2-3/8 tenon) 3.2 kgs.ARM-CL-K-S-XX1 10” adjustable arm .5 (.05) 5.75 (2.6)1 Replace XX with color choice, eg.: DB for Dark Bronze2 Fixture must include standard 6” straight arm
TENON TOP POLE BRACKET ACCESSORIES (ORDER SEPARATELY) Catalog # Description EPA WEIGHTSETA-XX1 4” Square pole top tenon adapter 0.4 ft2 20 lbs. 2 3/8” OD slipfitter for max. four fixtures (90°) 0.04 m2 9 kgs.
RETA-XX1 4” Round pole top tenon adapter. 2 3/8” OD 0.2 ft2 20lbs. slipfitter for max. four fixtures (90°) 0.02 m2 9 kgs. TETA-XX1 Three sided pole top tenon adapter 0.2 ft2 20lbs. 2 3/8” OD slipfitter for max. three fixtures 0.02 m2 9 kgs. (120°)
SETA-XX TETA-XXRETA-XX
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
SETA 4” RETA 4”TETA 4
9.5 9.5
4" 4" 5.5"
9.5" 9.5" 9.5"
COVER
CAST ADAPTER
CAST ADAPTER
THREADED ROD GASKET
FLAT WASHER
SCREW COVER
LOCKWASHER HEX NUT
RETAINER WASHER
ARM
CAST ARM FIXTURE
TO HOUSING (3-HOLE PATTERN END)
SQUARE POLE COVER
POLE COVER POLE COVER
POLE TOP
.875
Ø .875 HOLE
2.25
3.5
Ø .563 2 HOLES
ROUND POLE
ROUND POLE
SQUARE POLE
SQUARE & ROUND POLES UPSWEPT ARM MOUNTSQUARE & ROUND POLES
#2 DRILL PATTERN FOR POLES
NUT PLATE
NUT PLATE
NUT PLATE
SQUARE POLE
FIXTURE MOUNTING Square & Round
MAF – HORIZONTAL MAST ARM FITTER
LED Product Partner
MAL-KF-X
MAL-TK-X
SERIESCL1 Cimarron LED MOUNTINGA Arm mount construction (6” straight rigid arm ships attached & acceptable for 90° configurations) AD Decorative arm mount construction (6” decorative upswept arm acceptable for 90° configurations) MAF Mast arm fitter for mounting to standard 2 3/8” mast arm bracket, includes 6” straight arm (Can also be ordered as an accessory)
NUMBER OF LEDS 90L1 90 High brightness LEDs60L1 60 High brightness LEDs30L 30 High brightness LEDs
VOLTAGEU3 Universal 120V-277V, 50/60 Hz51 480V, 60 HzF1 347V, 60 HzE4 220V, 50 Hz CCT3K 3000K, 80 CRI4K 4000K, 70 CRI5K 5000K, 67 CRIAM Amber available for “Turtle friendly” applications (consult factory)
DISTRIBUTION2 Type II3 Type III4 Type IV5M Type V Medium5S Type V Short5W Type V Wide DRIVE CURRENT Leave blank for 700mA (standard)105 1050 mA (use with 90L – higher lumen output) COLORDB Dark Bronze BL Black WH White GR Gray PS Platinum Silver RD Red (premium color)FG Forest Green (premium color)CC Custom Color (premium color) OPTIONSBC6 Backlight controlBL1,2,5 Bi-level controlCD2 Continuous dimming
OPTIONS WB Wall bracketRPA3 3” Round pole adapterRPA4 4” Round pole adapterRPA5 5” Round pole adapterRPA6 6” Round pole adapterF(X)3,4 Fusing (replace X with voltage: 1-120V, 2-208V, 3-240V, 4-277V, 5-480V, 6-347V)VG Vandal guardSSB Stainless Steel LED Bezel CONTROL OPTIONSSC0 Motion control, no light output/ On-Off controlSC30 Motion control, dimmed to 30% light outputSC50 Motion control, dimmed to 50% light outputSC70 Motion control, dimmed to 70% light outputPRU5 NEMA photocell receptacle - 120-277VPR55 NEMA photocell receptacle - 480VPR65 NEMA photocell receptacle - 347VWIH7 In fixture wireless control module (consult factory)1 BL option for 90L and 60L and 120-277V only2 BL & CD cannot be combined3 Fuse option not available with universal voltage4 Select F3 fusing option for 220V5 Photocell receptacle not available with BL option6 Recommended for Type II, III and IV only7 Available with 120V, 277V, 347V and 480V