lighting high bay lighting...high performance hb50 is the only high bay ˚xture with integrated sine...
TRANSCRIPT
HB50 INDUCTIONLIGHTING
REV: Nov 2018
PROJECT TYPE
27 ½” Tall, 29 1/2” Diameter65 (Generator), 53 (Housing)400W208 - 480VacHook (Supplied) 1/2” Hole for PendantAluminum
Integrated Solid State, Sine WaveFiltration
DimensionsIP RatingWattagesVoltageMounting SystemHousingLens
Generator
10 Year Limited Warranty* All highbays come equipped with 6 foot safety cables.
10
SPECIFICATIONS
27 ½”
29 ½”
DIMENSIONSDESCRIPTION
>
>>>>>>
technology to dissipate surges and elminate transient voltages.
Smart electronics maintain optimal light output.High visual acuity; very little shadowing.Built for hot, damp, dirty environments.Integrated universal input driver 208-480 volt.
1 (603) 437-2787 | www.endurance-lighting.com
ORDER
N - None1 - L8-20P2 - L16-20P3 - L22-20P4 - L16-30P5 - L7-20P
0 - Black6 - Blue9 - WhiteA - NaturalAluminum
Chromate4 - Yellow
0 = No Re�ector1 = Re�ector
A = 6ftB = 12ft
HB50CABLE REFLECTOR PAINT COLOR PLUGPRODUCT
HEAVY INDUSTRYHIGH BAY LIGHTING
high performance HB50 is the only high bay �xture withintegrated sine wave electrical environments. The HB50 is built to survive challengingapplications.
The HB50 is equipped with computer generated optics tooptimize lumen output. acuity without glare and shadowing. The HB50 is designed forvisual comfort in the workspace.
LENS
AL- Acrylic LensNL- No Lens
8 E Industrial Way, Unit 4, Salem, NH 03079 (603 437-2787 [email protected] endurance-lighting.comEndurance Lighting© 2019
SOLID STATE GENERATOR SPECS
Input VoltagePower Factor
THDMinimum Input VoltageMaximum Input Voltage
Minimum Input FrequencyMaximum Input Frequency
Inrush CurrentMinimum Output Frequency
Nominal Output FrequencyMaximum Output Frequency
RoHS 5 ComplianceProtection - No Load
Protection - Load ShortProtection - Lamp Removed
208 - 480Vac Universal (UNV),> .96< 10%195 (Volts AC)525 (Volts AC)47 (Hertz)63 (Hertz)< 25 (Amperes)210 (KiloHertz)240 (KiloHertz)270 (KiloHertz)YesYesYesYes
1 Total load equals the maximum wattage used by both the lamp and the generator2 3
INITIAL LUMENS LAMP (LM/W) CRI HID REPLACEMENTWATTAGES
>8536,00070,560400 W >80 875-1,000W420 W 34,000
Cold Temperature StartMax Ambient Temperature
Isolation Resistance - Hot StateIsolation Resistance - Cold State
Isolation VoltageCooling
(Ta) -40 (Standard)(Ta) 70C< 200 Megaohms500 Megaohms2,000 Vac (S 10ma) 10sNatural Convection
Harmonic CurrentElectromagnetic Emission
ESDElectromagnetic Compatibility Immunity
Product StadardsApprovals
ANSI C82.11,IEC(EN)61000-3-2, GB17625 FCCCFR part18/EN55015/CISPR15/GB17743IEC 61000-4-2 Level3IEC(EN)61347-1/EC(EN)61347-2-3UL935/CAN.CSA C22.2UL, CE, FCC
CONTINUED
LAMP SPECIFICATIONS
Rated Lamp Life100,000 hrs.
High quality phosphor coating for superior lumen maintenance
instant restrict, solid amalgam, and stable color over long life
Excellent vibration and shock resistance with unlimited switching
LAMP FEATURES
Kelvin4,000 k
Lumen MaintenanceMinimum 70% @ 80,000 hrs.
* The below chart compares general depreciation trends
Actual depreciation may vary and is dependent upon a number of environmental factors, the manufacturer and the application in which the luminaire is used.
80k hrs.
70k hrs.
50k hrs.
60k hrs.
40k hrs.
10k hrs.
20k hrs.
0 hrs.
90k hrs.
100k hrs.
50%
60%
70%
80%
90%
100%
MH FL HPS LED INDUCTION
* This photometric chart shows the characteristic lighting
POLAR CURVE - 400WVertical and horizontal planes through the 11,541 Cd. maximum intensity point
HB50 INDUCTIONLIGHTING
1 (603) 437-2787 | www.endurance-lighting.com
HEAVY INDUSTRYHIGH BAY LIGHTING
8 E Industrial Way, Unit 4, Salem, NH 03079 (603 437-2787 [email protected] endurance-lighting.comEndurance Lighting© 2019