checkm8 advantage trafficking instructions v2.0

7/30/2019 Checkm8 Advantage Trafficking Instructions v2.0

http://slidepdf.com/reader/full/checkm8-advantage-trafficking-instructions-v20 1/37

1

CHECKM8 ADVANTAGE - TRAFFICKING INSTRUCTIONS

ContentsCHECKM8 ADVANTAGE - TRAFFICKING INSTRUCTIONS.........................................................................1

Contents...................................................................................................................................................................1

Log in to Advantage:...............................................................................................................................................2Check to see if “Customer” (same as “Advertiser” in DFP) exists........................................................................3

How to create a NEW INSERTION ORDER:........................................................................................................4

How to create a NEW CAMPAIGN .......................................................................................................................6Welcome ads/Interstitials - Images........................................................................................................................10

Welcome ads/Interstitials – Flash .........................................................................................................................16

STEP 1...................................................................................................................................................................16Welcome ads/Interstitials – Flash, with backup image provided..........................................................................21

STEP 2...................................................................................................................................................................21

Rich Media Interstitials..........................................................................................................................................24

Assets received: 3rd Party Ad Tag.........................................................................................................................24Clickable Skins......................................................................................................................................................29

Assets received: jpeg/gif, click thru URL, impression tracker (if applicable).......................................................29

Impression (Cache Busting) and Click Macros.....................................................................................................35Targeting Specific pages........................................................................................................................................36

of 37



2

Log in to Advantage: https://advantage2.checkm8.com/AdminServer/admin.jsp

Username: kyu @ elle

Password: kyu

You will be taken to a start page:

Start Page

The start page consists of three main panes, all of which allow users to view importantinformation from different modules on a single screen.

of 37

https://advantage2.checkm8.com/AdminServer/admin.jsp

https://advantage2.checkm8.com/AdminServer/admin.jsp



3

Check to see if “Customer” (same as “Advertiser” in DFP)exists.

1. Top toolbar click Operations to open the Operations module.

2. Search for Advertiser in the Search text field on the left pane of the screen.

3. If Customer doesn’t exist, create a new one

4. Click on New and select New Customer

5. Enter the name of the new advertiser and hit Save at the bottom right of the page.

of 37



4

How to create a NEW INSERTION ORDER:

1. Click New > New IO

of 37



5

2. IO Name field, enter the name for the IO. Naming convention is: PR-Advertiser Name (example: PR-Louis_Vitton)

3. Start Date and End Date ranges Start Date & End Date can be found in DFP or trafficking sheet

4. Click the Advertiser field to open the list of advertisers and select correct one.

5. Leave everything else blank, click NEXT button to advance to “Budget” module

6. Total IO Budget field enter the budget for the campaign (check in DFP)

7. Click SAVE

of 37



6

How to create a NEW CAMPAIGN

1. Click New > New Campaign

2. Properties Section:

a. Name, enter the name for the campaign. Please follow below naming convention:

PR-WebSite-Ad_Type_AdvertiserName_Targeting(flight dates)_ImpressionGoal.

(Example: PR-ELLE-Interstitial-HM-Beauty-Fashion-Shopping(08-13-08-30)_130K)

b. Start Date and End Date drop-down boxes, enter the dates and times between which the campaign will run.

c. Priority dropdown:

i. Set HIGHEST for Welcome ads;

ii. Set STANDARD for Regular Interstitials;

iii. Set Economy for Remnant Interstitials.

d. Weight dropdown

i. Set 100 for Welcome Adsii. Set 50 or higher (less than 100) for regular Interstitials

iii. Set 50 or lower for remnant interstitials

e. Distribution dropdown:

i. For Welcome ads set ASAP

ii. For Interstitials ads set Even

3. Budget Section:

a. Pricing Model:

i. Set all Interstitials ads as CPM

ii. Set all Welcome Ads as CPD

b. Rate: enter CPM that is received from ASM.

c. Booked Impressions: enter the number based on what is received from ASM.

d. Budget: once Rate and Booked Impressions are entered, you will see field highlighted red and an icon

appear. Click icon and this will calculate budget.

of 37



7

e. Bonus Impressions:

i. Welcome ads enter 20%

ii. Interstitials enter 10%

4. Click Save and you will see “green check arrow appear”

5. Click Next at bottom of page to continue to the Targeting page.

of 37



8

Targeting Information - When you click Next in the General page, the Targeting page opens. It consists of four tabs:

Channels, Day Parts, User Profile, and GEO.

1. Channels tab

Elle (the whole site) or Section targeting e.g. Fashiona. Welcome Ad Select all channels (i.e. select main channel Elle)

b. Full Page Interstitial For ROS targeting – select all sub channels EXCEPT

Homepage.

2. Day Parts: IGNORE

3. User Profile Search Pull down (see image) Select “All”

a. Click “Browser” Check “Custom targeting” Uncheck all Safari versions.

b. Click “Operating System” Uncheck all Mobile and Tablets e.g. iPad, iPhone,

WinPhone7.

4. GEO: Check ALL Countries UNCHECK Canada

5. Click Save

6. Click Next in the Targeting page.

of 37



9

Advanced Capping Rules Set Frequency Cap 1 impressions per user within 1 day, click ADD and SAVE.

DOUBLE CHECK YOUR WORK

Please see below how to create Welcome Ad and twoversions of Full Page Interstitials

of 37



10

Welcome ads/Interstitials - Images

Assets received: jpeg/gif, click thru URL, impression tracker (if applicable)

1. Click New > New Ad A page opens with 4 tabs: Properties, Creative, Events and Simulation.

2. In the Properties tab

a. Name Enter the name for the new ad. Please use following Naming convention is: ELLE-AdvertiserName- AdType – Run Dates –Ad ID - Imp Amounts (Example: ELLE-Interstitial-Calvin_Klein-ROS-02.05_03.03-

Ad_ID-266927054-$6K)

b. Format Click inside the textfield Click on Format the select ad format (placement) type from the list

box.

i. Select “welcome_ad” or “interstitial” depending on the type of ad you are running

of 37



11

c. Weight Set to 100

3. Click Save

4. Click Creative tab to continue

5. In the Creative tab

a. Click Change Template

of 37



12

b. Then select Rich Media (for gifs and jpgs only)

of 37



13

c. Within Rich Media select template from list above:

i. Welcome Ad v4 Opaque Bg for Welcome Adsii. Interstitial v8 – Snippet – Opaque Bg for Interstitials (jpgs and gifs only)

6. Click Save

7. In the Creative URL box, click on the “Upload” bottom on the extreme right, and add the creative

o Upload 730x440 image provided by ASM

7. Click Save

8. Click the Arrow above the upload button.

9. Then add the creative’s dimensions – width and height, and Click URL

of 37



14

10. Click Events tab

If Impression Trackers are provided, enter it in the Impression Tracking Pixel column (remember to click on the

check box first

11. Click Save

of 37



15

Testing and Setting it live

1. After creating an ad you can test it to see that it behaves as expected.

2. In the campaign level Set Status to TEST/HOLD save and wait 2-3 minutes for the campaign to go thru to the ad

server.

3. Check the TEST checkbox. A cookie is saved on your machine enabling you to see this campaign as if it was live.

4. Open the page this campaign is suppose to display on and check to see if it is displaying as you expected it to. It is

recommended to click the ad to verify that the click function is redirecting properly.5. Return to the campaign and uncheck the checkbox.

Note that if you do not uncheck this option you will not be able to see live campaigns from this machine.

6. Set the campaign to status “Ready” and save it.

Congratulations! Allow 2-3 minutes to see your running campaign through AdVantage™.

Welcome Ad is complete. Please check over your work again.

of 37



16

Welcome ads/Interstitials – Flash

STEP 11. Click New > New Ad A page opens with 4 tabs: Properties, Creative, Events and Simulation.


a. Name Enter the name for the new ad. Please use following Naming convention is: ELLE-AdvertiserName-

AdType – Run Dates –Ad ID - Imp Amounts (Example: ELLE-Interstitial-Calvin_Klein-ROS-02.05_03.03-

Ad_ID-266927054-$6K)


box.

i. Select “welcome_ad” or “interstitial” depending on the type of ad you are running

of 37



17


3. Click Save



d. Click Change Template

of 37



18

e. Then select Rich Media

of 37



19

f. Within Rich Media select template from list above:

i. Welcome Ad v4 Opaque Bg for Welcome Adsii. Interstitial v8 – Snippet – Opaque Bg for Interstitials (jpgs and gifs only)

8. Click Save


o Upload 730x440 Flash file


of 37



20

11. Change the Media Type to Flash


13. Click on the Targeting tab

14. Then click on Flash Plug in

15. Click on Custom Targeting/Logging

16. Then select everything EXCEPT “Missing”

of 37



21

17. Click on Save (on the bottom right corner)

Welcome ads/Interstitials – Flash, with backup image

provided

STEP 218. Go back to the beginning of Step 1, follow it till Number 6.


o Upload 730x440 image provided by ASM

20. Click Save



23. Click Save

24. Click back on the Properties tab

25. Click on the Default Ad check box

of 37



22




server.


of 37



24

Rich Media Interstitials

Assets received: 3rd Party Ad Tag

Creative Guidelines: MUST have opaque background; Must have close button; Auto close within 12 secs.



of 37



25


AdType – Run Dates –Ad ID - Imp Amounts (Example: ELLE-Interstitial-Calvin_Klein-ROS-02.05_03.03-

Ad_ID-266927054-$6K)


box.

i. Select “interstitial”


28. Click Save29. Click Creative tab to continue

30. In the creative tab

a. Click Banners

of 37



26

b. Within Banners select HTML

c. Check Rich Media Check Box

of 37



27

6. Click Save

7. Click Third-Party tag radio box

8. Paste 3rd party tag

9. Add Click and Time Stamp macros by placing your cursor where it should go and pushing corresponding Click Macro

/ Time Stamp button

10. Click Upload look for Green check to appear next to Upload button

11. Click Simulation Tab.

o Enter site URL

o Click Simulate.




server.

of 37



28


4. Open the page this campaign is suppose to display on and check to see if it is displaying as you expected it to. It

is recommended to click the ad to verify that the click function is redirecting properly.

5. Return to the campaign and uncheck the checkbox.




of 37



29

Clickable Skins

Assets received: jpeg/gif, click thru URL, impression tracker (if applicable)




AdType – Run Dates –Ad ID - Imp Amounts (Example: ELLE-Skin-Calvin_Klein-ROS-02.05_03.03-Ad_ID-

266927054-$6K)

b. Format Click textfield select ad format (placement) type from the list box.

i. Expand Formats (CHECKM8) select Skins

of 37



30

c. Weight IGNORE

33. Click Save



a. Click Rich Media

of 37



31

b. Within Rich Media select Clickable Skin template from list

36. Click Save

37. in the Creative URL:

o Upload skin image provided by ASM

38. In the lower right hand corner click Edit in Studio a new page will open in the same tab

of 37



32

39. Click on click script

40. In the Start Function text field modify existing click URL with current skin URL that was provided by ASM

Ex: the script is: this.theAd.link = "http://servedby.flashtalking.com/click/13560;69968;50126;211;0/?&url=200432";

Your URL is : http://bs.serving-sys.com/BurstingPipe/adServer.bs?cn=tf&c=20&mc=click&pli=1786398&PluID=0&ord=

%n

After you update the script it will look like this:

of 37



33

this.theAd.link = " http://bs.serving-sys.com/BurstingPipe/adServer.bs?

cn=tf&c=20&mc=click&pli=1786398&PluID=0&ord={^}";

41. Click Update Ad make sure you see a green checkbox

42. Click Close button, not the X in the tab, you are now back to Creative View

43. Click SAVE

44. Click Events tab

of 37



34

45. Track Pixel Section

o Check “Impression Tracking Pixel”

o Paste Impression tracking Pixel if any in Tracking pixel space provided. Add {^} timestamp random number

generator macro at the end of an ad tag.

DFA Example: http://ad.doubleclick.net/ad/N5767.HACHETTEFILIPACCHI/B3743520.47;sz=1x1;ord={^}

Atlas Example: http://view.atdmt.com/nyc/view1234567/direct/01/{̂ }

46. Click SAVE

47. Click Simulation Tab.

o Enter site URL

o Click Simulate.




server.


of 37

http://view.atdmt.com/nyc/view1234567/direct/01/%7B%5E%7D





35

16. Open the page this campaign is suppose to display on and check to see if it is displaying as you expected it to. It is

recommended to click the ad to verify that the click function is redirecting properly.

17. Return to the campaign and uncheck the checkbox.




Welcome Ad is complete. Please check over your work again.

Impression (Cache Busting) and Click Macros

Impression macro: Always replace any [CACHE BUSTER] or [timestamp] in your creative code with: {^}

Click macro – Insert this macro to track clicks: {%c%}

of 37



36

Targeting Specific pages

In order to target specific pages in CheckM8,

1. Go to the campaign in question2. Click on the “Campaign” level

3. Click on the “Targeting” tab

4. Then click on the “User Profile” tab

5. Click in the “Search” dropdown and select “All”

6. Scroll down and select “Location”

of 37



37

7. In the “White List”, enter the URL of the page you want the ads run on,

8. Then click “Add”

9. Repeat process 7 for as many pages you want to add.

checkm8 advantage trafficking instructions v2.0

Documents