checklist tin roof integra 1/6 · stainless steel drilling screw with sealing disc and approval 25...
TRANSCRIPT
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
Checklist tin roof INTEGRA 1/6
2) Building site
Construction project
1) Sender
Company: Street/No.:
Name: Zip code/Town:
Phone: E-Mail:
Date:
Street/No. Wind zone
Zip code Snow load zone
Town Height above sea level m
Terrain category ILakes with at least 5 km free area in wind direction; Areas with negligible and without obstacles
Terrain category IIAgriculturally used area with bounding hedges, individual farm buildings, houses or trees
Terrain category IIISuburbs of citys or industrial and manufacturing areas; Forests
Terrain category IVUrban areas in which at least 15% of the surface is covered with buildings and their average height exceeds 15 m
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
Checklist tin roof INTEGRA 2/6
3) Information about the building
Roof form:
Gable end roof Single-pitch roof
Roofing: INTEGRA tin roof
Width a m Parapet height m
Length b m Eaves radius m
Ridge height h m Eaves inclination °
Inclined roof length l m
Roof inclination a °
Roof form
Open building Yes No
Exposed position Yes No
Internal pressure Yes No
l
h
ab
4) Roofing
Fiber cement corrugated sheeting
Height of profile of the Profile 5 (58 mm) corrugated sheeting HP
Profile 8 (36 mm)
Other
Dimensions between center lines D
HP
D
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
Checklist tin roof INTEGRA 3/6
Profiles steel sheeting / Sandwich panel
Material quality profiled sheeting Steel sheeting Aluminum sheeting
Panel thickness D (only sandwich panel) mm Upper chord width UW mm
Core thickness without raised bead CT mm Lower chord width LW mm
Height of profile mm Bridge angle a °
Dimensions between center lines CL mm Beading height BH mm
Manufacturer, if known
Name, if known
LW
BH
a
UW
CL
D
UW
CL
CT
If manufacturer and name are not known
Upper chord width mm
Lower chord width mm
Bridge angle °
Height of profile mm
Dimensions of the raised beads mm
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
Checklist tin roof INTEGRA 4/6
If it is known, please attach the module data sheet!
Module type
Module length mm Module width mm
Spacing of the module rows mm Module weight kg
Power W
6) Information about the PV module
Module alignment: Upright Traverse
Rail arrangement: Horizontally Vertically Two-ply
Module arrangement: Number of modules on top of each other
Number of modules next to each other
7) Information about the module assembly
Steel
Steel substructure thickness mm
Type
Wood
Purlin height mm
Purlin width mm
Dimension between center lines m
Ridge width mm
Panel color
5) Substructure
PurlinsWidth
Height
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
Checklist tin roof INTEGRA 5/6
8) Information about the tin
Amount m²
max. Length 12,5 m Longer than 12,5 m (up to 16,5 m for an additional charge)
Color coating RAL: 8012 reddish brown 7016 anthracite
With anti-condensation layer Without anti-condensation layer
9) Accessories
Stainless steel drilling screw with sealing disc and approval 25 mm length DIN 7504 form K hexagon head (stainless steel A2)
Amount
Calottes (23/30)Color:- Aluminum blank
- Coated acc. to RAL 8012 reddish brown
- Coated acc. to RAL 7016 anthracite
Profile filler (positive form)
1 piece = 911 mm
Profile filler (negative form)
1 piece = 911 mm
911 mm
911 mm
Amount
Amount in pcs.
Amount in pcs.
Revision status: Marketing_20140811_00Original: (W:)/Marketing/Printmedien/Checklisten
Jurchen Technology GmbHwww.jurchen-technology.com
powerful connections
INTEGRA-Clip
Cable fastening clip
- Lower part
- Upper part
ANSICHT4 ( 2 : 1 )
A-A ( 2 : 1 )
A
A
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
1 A3
Kabelklemme-Integra Unterteil
JT-0021-00.3.10.1Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name14.01.2013 s.raimondi
Allgemein-toleranz DIN ISO2768-m
Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Konkurrenzfirmen zugänglich gemacht werden
OberflächenDIN EN ISO 1302
M2:1Material: PA-6Art.-Nr.: 06004979
Checklist tin roof INTEGRA 6/6
TEILELISTEBESCHREIBUNGBAUTEILNUMMERANZAHLOBJEKT
Fa. DAFA TYP 3Zellkautschuk_40x20x1021 Oberteil 02-offen12
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
1 A3
Kabelklemme Integra Oberteilmit Zellkautschuk
JT-0021-00.2.02.0Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name11.06.2013 s.raimondi
Allgemein-toleranz DIN ISO2768-m
Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Konkurrenzfirmen zugänglich gemacht werden
OberflächenDIN EN ISO 1302
M2:1
Art.-Nr.: 06004980
1
1
2
The undersigned declare that, to the best of their knowledge and belief, the information made is correct.
Place, Date, Name Signature
ModificationsAccording to customer specifications, the following modifications had arisen:
Modifications, Date, Name Signature
Amount
Amount