chatsworth products inc. 2011 buyer's guide

2011 Buyer’s Guide

Standard Rack

CPI’s Standard Rack provides direct support for panelmount equipment, such as patch panels and networkingequipment and may be adapted with shelves to supportcomputer server and data storage equipment.

• Supports up to 1,000 lb of equipment• RMU are marked and numbered on

equipment mounting rails• EIA-310-D compliant #12-24 threaded

equipment-mounting holes on 3” deep equipmentmounting channels

• UL Listed as a communications accessory• Includes assembly hardware and 50 each

#12-24 mounting screws• Must be secured to building structure with

Installation Kit

Part Number Description, H x W x D

55053-703 Standard Rack, 84”H x 19”W x 45U, Black



66353-703 6”D Standard Rack, 84”H x 19”W x 45U, Black

40604-003 Installation Kit, Concrete Floor, Zinc

Other sizes and colors available.

Rack Systems

Velocity™ Standard Pack

The Velocity™ Standard Pack is an easy to use solution formanaging equipment and cabling at the cross-connect. Itincludes one CPI Standard Rack, a concrete floorinstallation kit and a single or double-sided Velocityvertical cable manager packaged in one single carton.

• Rack supports up to 1,000 lb of equipment• (4) variations with a single-sided or double-sided cable

manager in either 3.6”W or 6”W. Cable managers canbe mounted on either side of the rack

• Numbered rack-mount spaces on the standard rack areprinted on the equipment mounting channels

• Cable openings have rounded edges and align with rack-mount units providing installers with an easy wayof positioning equipment in planned spaces

• Cover snaps on and opens to right or left• Secure rack to building structure with Installation Kit


57011-703(1) Standard Rack, 45U x 19”EIA, UL, Black(1) Velocity Single-Sided Cable Manager, 3.6”W, Black(1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc

57012-703(1) Standard Rack, 45U x 19”EIA, UL, Black(1) Velocity Double-Sided Cable Manager, 3.6”W, Black(1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc

57013-703(1) Standard Rack, 45U x 19”EIA, UL, Black(1) Velocity Single-Sided Cable Manager, 6”W, Black(1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc

57014-703(1) Standard Rack, 45U x 19”EIA, UL, Black(1) Velocity Double-Sided Cable Manager, 6”W, Black(1) Rack Installation Kit for Concrete Floor, 1/2” Hardware, Zinc

www.chatsworth.comwww.accu-tech.com

19” Rack Shelves

Shelves for 2-post Rack Systems are designed to holdmiscellaneous equipment, test gears, and small peripheralequipment in a central location on 19”W racks, savingvaluable space. Made of strong, lightweight aluminum,shelves hold various load capacities and most are ULListed.


Grounding & Bonding

As part of a properly designed and installed IT infra-structure, CPI’s UL Listed Grounding and Bonding Productshelp protect today’s high-speed cabling systems bypreventing transient voltage from damaging sensitiveelectronic equipment. Select form CPI’s comprehensive lineof products promoting electrical safety throughout thenetwork.


40074-700 3U x 19”EIA x 14.8” Single-Sided, 50 Lb Load, UL Listed, Black

40108-719 4U x 19”EIA x 21.5” Double-Sided, 100 lb load, UL Listed, Black

11504-719 5U x 19”EIA x 25.8” Double-Sided, Extra Deep, 150 lb loadUL Listed, Black

11164-719 5U x 19”EIA x 19.8” Double-Sided, Heavy-Duty, 200 lb loadUL Listed, Black

11415-719 4U x 19”EIA x 17.5” Sliding Equipment Shelf, 100 lb load, Black

40605-005 Mounting Screws, #12-24, 50 Pack, Black


40167-001 Two-Mounting Hole Ground Terminal Block3/4”H x 1-1/2”W x 5/8” Hole Spacing, #14 AWG to 2/0

13266-012 Grounding Bar, 12”L x 2”W x 1/4” thick

40159-001 Ground Wire, No Lugs, #6 AWG, 100’L

40159-009 Ground Jumper, (1) Lug, #6 AWG, 9’L

40159-010 Equipment Ground Jumper Kit (2) Lugs, #6 AWG, 24”L

40161-072 Vertical Rack Busbar Kit, 72”L x 1/4” thick

10610-019 Horizontal Rack Busbar Kit for 19” Racks

40172-001 Rack Ground Bar Kit, 78”L x .05” thick

Other options available.

http://www.chatsworth.com/uploadedFiles/Files/55053_datasheet.pdf

http://www.chatsworth.com/uploadedFiles/Files/66353_cut.pdf

http://www.chatsworth.com/uploadedfiles/files/QRG_RACKS.PDF






http://www.chatsworth.com/uploadedfiles/files/57011_DATASHEET.PDF

http://www.chatsworth.com/Common/PageTemplates/PageMain.aspx?id=168

QuadraRack® ServerFrame &QuadraRack® 4-Post Frame

Designed specifically for rack-mount servers, theQuadraRack® Server Frame offers the strength andstability of a cabinet, but in an open mounting system.Manufactured from aluminum and steel, the C-shapedchannels with square holes and horizontal braces provideoptimal torsional strength. Load rating 1000 lb.

The QuadraRack® 4-Post Frame also offers the strength andstability of a cabinet in an open mounting system withunrestricted airflow and easy installation. Manufacturedfrom aluminum with #12-24 threaded equipment mountingchannels, the rack ships unassembled and has a loadrating of 2000 lb.

• 19” EIA width• EIA-310-D Standard Universal 5/8” -5/8” -1/2”

alternating hole pattern


15053-703 ServerFrame, 7’H x 19”W x 29”D, 45U, Black

50120-703 4-Post Frame, 7’H x 19”W x 29”D, 45U, Black




Rack Systems


Adjustable Rail QuadraRack® &Adjustable ServerRack Accessories

Fixed QuadraRack® Accessories

Adjustable Rail QuadraRack® &Adjustable Rail ServerRack

Provides a sturdy, feature-rich solution for supporting rack-mount network, computer server and data storage equip-ment in data centers, computer equipment rooms andother IT facilities. Both racks offer the strength and stabil-ity of an enclosure in an open four-post mounting systemthat provides easy access to equipment and cabling.

• Available in three heights and two depths• Adjustable Rail QuadraRack™ has threaded

mounting holes that speed installation of patch panels,fiber enclosures and network switches

• Adjustable Rail ServerRack has square-punched rails that permit mounting hardware changesto match specific equipment

• Each RMU is marked and numbered. Front rails can be mounted to allow RMU numbering to startat the top or bottom of rack

• Racks include a Top-Mount Cable WaterfallTray with adjustable radius drops to allow easy side-to-side routing of cords and cables

• The rear mounting rails adjusts in depth• UL Listed 60950• Each rack supports up to 2200 lb.


15252-703 Adjustable Rail QuadraRack, #12-24 Threaded Rails, Rack Depth 900 mm - 1050 mm, 45U, Black

15254-703 Adjustable Rail ServerRack, Square-Punched Rails, Rack Depth 900 mm - 1050 mm, 45U, Black



16351-719 Heavy-Duty Fixed Shelf, 19”W x 29”D, Solid, Supports up to 200 lb, Black

16350-719 Heavy-Duty Fixed Shelf, 19”W x 29”D, Vented, Supports up to 200 lb, Black

12700-719 Extra Heavy-Duty Sliding Shelf, 2U x 19”W x 26”D, Extends 24”, Supports up to 300 lb, Black

16358-719 Equipment Tie-Down Bracket, 3U x 19”W x 23”D, Black

35882-5A2 PowerWedge Controlled PDU, 250 Volts, 30 Amps, NEMA L6-30P Plug, 24 IEC60320 C-13 Receptacles

35883-5B2 PowerWedge Controlled PDU, 230 Volts, 32 Amps, IEC60309 (2P+E) Plug, 24 IEC60320 C-13 Receptacles



15285-702 Equipment Support Rail, Supports 200 lb, Black

15245-703 Shelf, Solid, 27.62”D, Supports 200 lb, Black

15255-703 Shelf, Vented, 27.62”D, Supports 200 lb, Black

15205-701 Cable Runway Mounting Bracket, Black

15286-003 Cable Guide Kit, 45U Racks, Black

15270-705 Solid Side Panel, Black

15330-701 Center Rail, 72”H, 38U, Square-Punched Rail, 1 Pair, Black

15335-701 Center Rail, 72”H, 38U, #12-24 Threaded Rail, 1 Pair, Black


http://www.chatsworth.com/Product_Docs/15053_DATASHEET.pdf

http://www.chatsworth.com/uploadedfiles/files/50120_DATASHEET.pdf

http://www.chatsworth.com/uploadedFiles/Files/16351_CUT.pdf

http://www.chatsworth.com/uploadedfiles/files/PDU_DATASHEET.pdf

http://www.chatsworth.com/uploadedfiles/files/35882_POWERWEDGE_CUT.pdf


http://www.chatsworth.com/uploadedfiles/files/15285_CUT.PDF



http://www.chatsworth.com/uploadedfiles/files/15205_CUT.pdf



http://www.chatsworth.com/uploadedfiles/files/1521X_DATASHEET.pdf

http://www.chatsworth.com/uploadedfiles/files/1521X_DATASHEET.pdf

Evolution® Vertical Cable Manager

Provides an engineered solution for managing high-density cabling applications onopen two-post and four-post CPI Rack Systems, delivering increased performanceto match the demands of data center applications.

• Improved T-shaped cable guides decrease deflection when loaded with cables; especially important when deploying Cat 6a cable

• Rounded edges on cable guides protect cables as they enter and exit the storagespace

• Door opens to the right or left • Rigid trough minimizes movement when installed on the end of a row of racks;

solid construction with full rectangular base supports large bundles of heavycables

• Openings in the back of the single-sided and middle of the double-sided managers allow cables to pass easily front to rear

• Fixed accessory panels on the single-sided and Movable Mid-Sections on the double-sided manager support various cable management accessories by dividinginterior space and managing cable slack

• Combination cable manager has rear cable rings with pin-open latches on back(no door/cover). Three large cable spools included with 10”, 12” & 15” widemanagers.

Available in 12”W & 15”W versions.

Cable Management


Evolution® Horizontal Cable Manager

• Contoured front door with snap-hinges and longitudinal center feature contrasting aluminum finish

• Three 2.12”W x 1.25”H (53 mm x 31 mm) edge-protected oval cable pass-through ports at therear of the cable manager

• Snap-on cover opens up or down

Evolution® Vertical Cable Management Accessories

Fiber Segregation Kit - Creates a seperate pathway for fiber cables and patchcords inside the cable managers.

Cable Lashing Bar Kit - Provides tie points for cables inside the cable managers.

Cable Divider Bar Kit - Provides tie points for cables and divides the interior ofthe cable manager to create multiple pathways for cables.

Solid Rear Panel Manager - Encloses the rear of the single-sidedcable manager.

Solid Mid Panel - Divides front and rear of the double-sided cable manager.

Solid Side Panel Manager - Covers the side of the double-sided cable managerlocated at the end of a row.

Other sizes and options available.


35511-703 7’H x 6”W x 13.2”D, g1 Single-Sided Manager, Black



35521-703 7’H x 6”W x 24.5”D, g2 Double-Sided Manager, Black



35571-703 7’H x 6”W x 20.2”D, g3 Combination Manager, Black




35441-702 1U x 19”EIA x 8.2”D, Black

35441-702 2U x 19”EIA x 8.2”D, Black

35441-703 3U x 19”EIA x 8.2”D, Black


35475-701 Fiber Segregation Kit, Black

35473-001 Cable Lashing Bar Kit, Black

35503-701 Cable Divider Bar Kit, Black

35501-702 Solid Rear Panel for 6”W g1 Manager, Black

35497-702 Solid Mid Panel for 6”W g2 Manager, Black

35502-702 Solid Side Panel for 7’H g2 Manager, Black

35506-701 Floor Bracket, Black


MCS Master Cabling Section

Use the MCS Master Cabling Section to organize largequantities of cable by providing frequent one rack-mountunit spacing of cable guides that align with rack spacing.

• SwitchGate Door/Cover is easily opened right or left • Double-Sided version has edge-protected pass through

ports and vertical slots for straps• MCS-EFX is a larger, higher capacity version with cable

openings sized to accomodate twice the capacity • 10”W MCS version and 10”W and 12”W MCS-EFX

include (4) Cable Distribution Spools• Mounting hardware and doors are included


30092-703 MCS, 84”H x 6”W x 8.08”D, Single-Sided, Black

30093-703 MCS, 84”H x 10”W x 8.08”D, Single-Sided, Black

30095-703 MCS, 84”H x 6”W x 16.2”D, Double-Sided, Black

30096-703 MCS, 84”H x 10”W x 16.2”D, Double-Sided, Black

40096-703 MCS-EFX, 84”H x 10”W x 21.2”D, Double-Sided, Black

40097-703 MCS-EFX, 84”H x 12”W x 21.2”D, Double-Sided, Black

Other sizes available.

Cable Management


CCS Combination Cabling Section

Provides a vertical cable pathway in between equipmentracks. Double-sided trough includes a closed front-sidepathway for patch cords and an open rear-side pathwayfor premise cables.

• Open cabling section in rear provides easy access and routes cable bundles feeding the back of patch panels

• SwitchGate Door/Cover is easily opened right or left• CCS-EFX cable openings are sized to fit 48 patch cords• Mounting hardware and doors included

Other sizes available.

Universal Horizontal Cable Manager

• Extra-wide and contoured cable guide fingers spaced 1.75” apart to separate cords

• Snap-on covers open 180˚ up or down

Velocity™ Cable Management

Velocity™ Cable Management is an economical cable management solution foreveryday use on open two-post and four-post CPI Rack Systems,

• Quick and easy tool-less snap together design takes approximately 3-5 minutes to unpack, assemble and install

• Compact packaging is easy to ship, requires less storage space, reduces wastes and make cartons easier to handle

• Larger cross-section on single-sided vertical managers provides more cable management space

• Openings on the side of the manager align with each rack-mount unit


30139-719 1U x 19”EIA x 4.9”D, Black

30130-719 2U x 19”EIA x 5.1”D, Black

30131-719 3U x 19”EIA x 5.1”D, Black


30161-703 CCS for 3”D Racks, 84”H x 3.65”W x 12.24”D, Black

30162-703 CCS for 3”D Racks, 84”H x 6”W x 12.24”D, Black

30164-703 CCS for 6”D Racks, 84”H x 3.65”W x 12.24”D, Black

30165-703 CCS for 6”D Racks, 84”H x 6”W x 12.24”D, Black

40098-703 CCS-EFX, 84”H x 3.65”W x 14.61”D, Black

40099-703 CCS-EFX, 84”H x 6”W x 14.61”D, BlackOther sizes available.


13901-703 Vertical, for 45U Rack, 80.5”H x 3.6”W x 9.7”D, Single-Sided, Black

13902-703 Vertical, for 45U Rack, 80.5”H x 6”W x 9.7”D, Single-Sided, Black



13911-703 Vertical, for 45U Rack, 80.5”H x 3.6”W x 16.4”D, Double-Sided, Black

13912-703 Vertical, for 45U Rack, 80.5”H x 6”W x 16.4”D, Double-Sided, Black



13930-701 Horizontal, 1U x 19”EIA x 5.9”D, Single-Sided, Black




http://www.chatsworth.com/uploadedFiles/Files/CPI_CATALOG_SECTION_5(1).pdf



Cable Runway and Tray


Part Number Description, H x W x D Key

11237-701 Floor Support Stand, 8-10”H A

11241-712 Floor Support Channel, 3-8”H, 12”W, with anchors B

10724-712 Inside Radius Bend, 1.5”H x 12”W x 12.5” Dia. C

10608-001 Vertical Wall Brackets, 1 Pair D

10642-001 End Caps, 1 Pair E

12101-701 Radius Drop, Side Stringer, 10.25”W F

12100-712 Radius Drop, Cross Member, 11”W alt F

11421-712 Wall Angle Support for 12”W Cable Runway G

11302-001 Junction Splice Kit (L or T connection) H

11746-712 Triangular Wall Bracket for 12”W Cable Runway I

11301-001 Butt-Splice Kit (end-to-end connection) J

10822-712 E-Bend, 1.5”H x 12”W x 27” Dia. K

11310-003 Threaded Ceiling Support Kit, 5/8 Rod L

10557-003 Beam Clamp, 5/8-11 Threaded Rod M

12362-712 Center Support Kit for 12”W Cable Runway N

10723-712 Outside Radius Bend, 1.5”H x 12”W x 12.5” Dia. O

11959-724 Corner Bracket, 25” x 25” P

10506-716 Elevation Kit for Cabinets, 4-6”H Q

10595-712 3”D Rack-to-Runway Mounting Plate R

10506-706 Elevation Kit for Racks, 4-6”H R

10684-701 Pipe Stand, 2” Dia., 7’H S

10250-712 Universal Cable Runway, 1.5”H x 12”W x 9’-11.5”L T

11309-001 Foot Kit U

Cable Runway

Use Cable Runway to create cable pathways between equipment racks/cabinets and the entry/exit points in telecommunication facilities. Support from the floor,wall, rack/cabinet or ceiling every 5’ of span. Various types of supports areavailable. Identify each component by matching the letter in the graphic to thecolumn (key) in parts list.

• Easy to cut and assemble to form pathways for network cables inequipment rooms

• Standard 10’L straight sections make planning easy• E-Bends, Radius Bends, Corner Brackets and Radius Drops form smooth turns

to maintain proper cable bends• Pathway components bolt together with simple splices• Support from wall, ceiling, floor and the tops of racks and cabinets• Excellent load-bearing capacity for network cables

Note: Other sizes and colorsavailable: contact your localAccu-Tech representative forpart numbers and information.

http://www.chatsworth.com/uploadedFiles/Files/qrg_cable_pathway.pdf

Cable Runway and Tray


Part Number Description, H x W x D Key

34811-520 OnTrac Wire Mesh Cable Tray, 2”H x 20”W x 10”L A



34738-501 Standard Splice Kit, Pack of 50 B

34739-501 Splice Bar Kit, Pack of 50 B

34728-501 Splice Washer and Bolt Kit, Pack of 50 B

34731-501 Edge Hanger, Pack of 50 C

34729-520 Center Support Bracket, 20”W D

34730-520 Trapeze Support Bracket, 20”W E

34735-520 Wall-Mount Angle, 20”W F

34733-520 Triangle Support Bracket, 20”W G

34734-520 L-Support Bracket, 20”W H

34740-501 90˚ Splice Bar Kit (one T or two 90˚ intersections) I

34737-501 Pedestal Clamp Bracket (on L-Support) J

34737-502 Pedestal Clamp Support Kit K

34736-583 Under Floor Support, 3”H x 8”W L

OnTrac® Wire Mesh Cable Tray System

Use OnTrac® Wire Mesh Cable Tray to create point-to-point pathways for networkcabling in data centers, network equipment rooms and office spaces.

• Standard 10’L U-shaped sections are available in three heights and eight widths• Pathway components bolt together with simple splices; cut and form tray to

create turns• Tray is UL Classified for suitability as an equipment grounding conductor• Excellent load bearing capacity and protection for network cables• Support from wall, ceiling, floor and the tops of racks and cabinets

Other sizes and colors available: Contact yourlocal Accu-Tech representative for part numbers and information.

Note: Zinc electroplate finish.

http://www.chatsworth.com/ontrac-wire-mesh-cable-tray

Standard Swing Gate Wall Rack

Provides wall-mounted support for rack mount telecommunications and network equipment with ease ofaccess to the rear of equipment, where premise space islimited. Add Cable Management Rings to provide a complete connection between the wall and rack-mountedequipment. 100 lb load but can be increased to 150 lb loadwith a Heavy-Duty Swing Gate Kit.

• 100 lb equipment load, open or closed• Pivots open to right or left, latches in closed position• UL Listed


11790-718 Swing Gate, 29”H x 19”W x 18”D, 13U, Black


11807-718 Swing Gate, 53.5”H x 19”W x 18”D, 27U, Black


11799-001 Cable Rings, Set of 6, Black

12795-701 Heavy Duty Swing Gate Kit, Black


EasySwing Wall-Mount Rack

Provides wall-mounted support in a cost-effective 19”WEIA swing-gate rack for mounting network, communica-tions and security equipment where space is limited.

• Supports 85 lb of equipment• Opens 180˚ to right or left• Locking latch pin scures gate in closed position• 19”EIA threaded equipment mounting rails• Ships flat, folds open to mount on wall


13602-718 EasySwing, 24.5”H x 19”W x 18”D, 11U, Black



Wall-Mount Racks & Cabinets



Fixed Wall-Mount Equipment Rack

Similar to the Standard Swing Gate Wall Rack but withfixed equipment mounting channels. Fixed Wall-MountEquipment Rack doubles the load bearing capacity to 200lb. Use to support heavier switches and equipment.

• Supports 200 lb of equipment• Supports single- and double-sided shelves• Ships unassembled with installtion hardware• Tapped with #12-24 roll-formed threads


11960-718 Fixed, 24.5”H x 19”W x 18”D, 13U, Black



11799-001 Cable Rings, Set of 6, Black


Universal Swing Gate Rack

This full-featured swing gate rack offers 150 lb loadhandling capacity, easy assembly and built-in cablemanagement capabilities.

• 35”, 20U usable mounting height• 12” or 18” usable depth• Dual locking latches keep gate securely closed• Built-in cable management with nine cable

pass-through ports • Made of strong, lightweight aluminum• Easy assembly • Supports 150 lb of equipment


11347-719 Universal, 35”H x 19”W x 12”D, 20U, Black

11348-719 Universal, 35”H x 19”W x 18”D, 20U, Black

Other colors available.

Wall Bracket with Cover

The Wall Bracket with Cover allows 2U or 4U of 19”WEIA rack-mount equipment to be securely wall-mountedinside or outside of the equipment room.

• Low profile design projects only 4” or 8” from the wall• Removable cover protects equipment• Open ends and vents along the sides provide

ventilation for equipment• Includes tapped #12-24 equipment mounting rails for

19”W EIA-310-D compliant rack-mount equipment,includes #12-24 equipment mounting screws

• Mounting rails adjust in depth in 1.5” increments; recess rails to cover cable connections on the front ofequipment; maximum usable depths - 19”, 17.5” or 16”

• Internal equipment space: 2U or 4U x 19”EA x 19”D• Supports 50 lb of equipment


84101-700 2U, 4”H x 20”W x 22”D, Black

84102-700 4U, 8”H x 20”W x 22”D, Black



http://www.chatsworth.com/uploadedFiles/Files/13602_datasheet.pdf



CUBE-iT PLUS®Cabinet System

A series of wall-mounted and floor-supported enclosures designed to secure networkor security equipment. The cabinets are copper and fiber ready and feature easy access to the front or rear of the cabinet.

Creates a secure wall-mounted storage location for network and security equipment.Provides easy access to front and rear of equipment.

• Cabinet and front door swing open to provide easy access to the front door and rear of equipment

• Door and rear panel lock and are keyed alike• Includes one pair of adjustable depth 19” EIA-310-D equipment mounting rails

with threaded #12-24 equipment mounting holes• Rear panel has pre-punched knockouts for 1/2”, 3/4”, 2-1/2” and 3” conduit,

cable tie points and locations for accessory brackets• Wall-mount cabinets support up to 200 lb of equipment and are UL Listed• Floor mount cabinets support up to 1000 lb

Wall-Mount Racks & Cabinets



11890-724 Wall Cabinet, 12U, 24”H x 24”W x 18”D, Black









13491-760 Wall/Floor Cabinet, 33U, 66”H x 27.3”W x 18”D, Black






Other colors and door styles available. Maximum depth of rack-mount equipment should be 6” less thancabinet depth to allow full access to the rear of the cabinet.

CUBE-iT PLUS Cabinet System and ThinLine II Cabinet Accessories

Part Number Description

12804-701 Fan Kit, 100 CFM, 115 VAC, 5’L Power Cord

12820-701 Power Strip, Non-Surge, 115 VAC/15A, NEMA 5-15P

12820-703 Power Strip, Surge-Protected, 115 VAC/15A, NEMA 5-15P

11837-701 Horizontal Wire Management Bar

12803-701 Universal Light Kit, 115 VAC, NEMA 5-15P plug

13485-760 Vertical Cable Manager for 60”H cabinets only

For ThinLine II Wall-Mount Cabinet

13051-001 Fan for 4U and 6U Cabinet, 65-120 CFM, 115 VAC

13051-002 Fan for 2U Cabinet, 36-49 CFM, 115 VAC

12934-001 Surge Suppressed Duplex Receptacle, 125 VAC, 15A

12955-719 Fiber Slack Manager Panel, Black

Other accessories available

ThinLine II Wall-Mount Cabinet

This space-saving wall cabinet safely secures 19” rack-mount network equipment with minimal intrusion intothe room making it perfect for tight areas or high-trafficplaces.

• Includes two pair of 19” EIA-310-D equipment mounting rails with threaded #12-24 equipmentmounting holes

• Position of mounting rails is adjustable• Removable top panel for direct access to equipment• Low profile design, only 12” from wall• Ships fully assembled with mounting hardware• Supports up to 100 lbs. of equipment




13050-712 Wall Cabinet, 4U, 26”H x 26”W x 8.5”D, Black

13050-722 Wall Cabinet, 4U, 36”H x 26”W x 8.5”D, Black



Other colors available. Order wall installation hardware separately.

12804-701 13501-001

Wall-mount Cabinet

Wall-mount, Floor mount Cabinet

http://www.chatsworth.com/uploadedFiles/Files/cubeit_faq.pdf



F-Series TeraFrame® Cabinet System

The F-Series TeraFrame® Cabinet System is infinitely configurable and can be personalized to meet specific data center needs. Designed to solve thermal issues in the data center and lessen the need forexpensive cooling equipment, the F-Series Cabinet System offers patent-pending advanced thermal contolwith no single point of failure, thus delivering a Tier 4 solution for high-density applications and protecting equipment. A variety of CPI Passive Cooling Solutions are available to achieve maximum cooling.

• Available in three widths, 12 heights and 17 depths, 612 total sizes• Choose top panels, side panels and doors to match your thermal management and security needs• Optional Vertical Exhaust Duct guides hot exhaust air from the top of the cabinet to the space above thedrop ceiling• Includes two pair of adjustable depth equipment mounting rails to provide front and rear support for19”EIA rack-mount equipment• UL Listed• Load Rating: 2,500 lb for 23.6”W; 2,000 lb for 27.6”W & 31.5”W cabinets

Cabinet Systems


1. HeightCabinet Frame

Uin mm in mm46.8 1189 46.6 1184 24 A67.8 1722 67.6 1717 36 B78.3 1989 78.1 1984 42 C80.0 2032 79.9 2029 43 D81.8 2078 81.6 2073 44 E83.5 2121 83.4 2118 45 F85.3 2167 85.1 2162 46 G87.0 2210 86.9 2207 47 H88.8 2256 88.6 2250 48 J90.5 2299 90.4 2296 49 K92.3 2344 92.1 2339 50 L94.0 2388 93.9 2385 51 M

4. Rail Style1 Square-Punched, 2 Pair2 Tapped, #12-24, 2 Pair

10. Side Panel Style0 None1 Solid, 1 each2 Solid, 2 each3 Vented, 1 each4 Vented, 2 each

8. ColorC BlackD Signature BlueE Glacier WhiteF Steel Gray

5. Front Door0 None1 Single, Perforated Metal2 Single, Solid Lexan®

3 Single, Solid Metal

F H W D - R FD RD L - C TP SP

9. Top Panel Style0 None2 Network, 4 Cable Openings4 Server, 2 Cable Openings

5Vertical Exhaust Duct System, 20”-34”H (508 mm-863 mm)

6Vertical Exhaust Duct System, 34”-60”H (863 mm-1523 mm)

7. Latches (Door)A Single-Point, Slam Latch, Keyed LockB Single-Point, Cam Latch, Keyed LockC Two-Point, Cam Latch, Keyed LockD Single-Point, Cam Latch, Combo LockE Two-Point, Cam Latch, Combo LockF Single-Point, Electronic Keypad LockK Single-Point, Slam Latch, Combo LockN None (use when NO DOORS selected)

6. Rear Door0 None1 Single, Solid Metal2 Single, Perforated Metal3 Double, Perforated Metal

3. DepthCabinet Rails Framein mm in mm in mm

35.3 897 28.6 726 31.5 800 A36.3 922 29.6 751 32.5 825 B37.3 947 30.6 776 33.5 850 C38.2 972 31.5 801 34.4 875 D39.2 997 32.5 826 35.4 900 E40.2 1022 33.5 851 36.4 925 F41.2 1047 34.5 876 37.4 950 G42.2 1072 35.5 901 38.4 975 H43.2 1097 36.5 926 39.4 1000 J44.2 1122 37.4 951 40.4 1025 K45.1 1147 38.4 976 41.3 1050 L46.1 1172 39.4 1001 42.3 1075 M47.1 1197 40.4 1026 43.3 1100 N48.1 1222 41.4 1051 44.3 1125 P49.1 1247 42.4 1076 45.3 1150 R50.1 1272 43.3 1101 46.3 1175 T51.0 1297 44.3 1126 47.2 1200 U

Note: Double door requires a two-point latch (C) or (E),see latches above.

Note: Use options 5 & 6 on 41.3”D (1050 mm) to 47.2”D (1200 mm) cabinets

2. WidthCabinet

EIAFrame

in mm in mm23.6 600 19” 23.6 600 127.6 700 19” 27.6 700 231.5 800 19” 31.5 800 3

Use the part number configurator below to create a custom TeraFrame. Choose the Height, Width, Depth, Rail Style, Front Door, Rear Door, Latch, Color, Top Panel Style, and Side Panel Style. Example part number: FF2J-112A-C22

Verti

cal E

xhau

st D

uct

http://www.chatsworth.com/Product_Docs/TERAFRAME_700MM_DATASHEET.pdf

Cabinet Systems


F-Series TeraFrame® HD Cabinet System

The F-Series TeraFrame® HD Cabinet System is designed for safe transportation of up to 3,000 lb of electronic equipment from a factory integration site direct to the customer’s datacenter. Every cabinetincludes two pairs of sliding adjustable mounting rails, heavy duty casters with roller bearings for superiorlong-term performance under load, a shock pallet and a re-usable cushioned carton for protection duringshipment.

• Available in 600 mm width, 3 heights and 2 depths• Provides front and rear support for 19”W EIA equipment and shelves with adjustable depth

mounting rails• Includes leveling feet, casters and grounding and bonding kit• Can be ordered with Server top panel or Vertical Exhaust Duct• Heavy-duty welded steel and bolted aluminum frame construction• Load Rating: 3,000 lb of equipment (static or dynamic)


FHD-C1M-113B-C42 82.5”H x 23.6”W x 42.3”D, 42U, Server Top Panel, Black

FHD-C1U-113B-C42 82.5”H x 23.6”W x 47.2”D, 42U, Server Top Panel, Black

FHD-C1U-111B-C52 82.5”H x 23.6”W x 47.2”D, 42U, with Vertical Exhaust Duct, Black

16280-C01 Unloading Ramp for safe removal of cabinet from shock pallet

16279-C01 Bolt Down Kit, to securely anchor cabinet

Note: Other sizes and colors available.

N-Series TeraFrame® Network Cabinet System

The N-Series TeraFrame® Network Cabinet provides a complete storage solution specifically designed to supporthigh-density, high performance modular network switches requiring side-to-side airflow.

• Available in 10 heights and 11 depths• Optional Network Switch Exhaust Duct, a Passive Cooling® Solution, guides hot exhaust air from the side of the

cabinet to the rear door• Offset doors and side panels provide easy access to equipment and extra interior space for managing cables• Includes two pair of equipment rails to provide front and rear support for 19”EIA rack-mount equipment• Cisco compatible for housing Catalyst 6500E and MDS 9500 Series of products• Juniper EX8208 and EX8216 Ethernet Switch compatible• Load Rating: 2,500 lb of equipment


NF0K-113C-C42 83.5”H x 31.5”W x 44.2”D, 45U, No Duct, Black

NF1K-113C-C42 83.5”H x 31.5”W x 44.2”D, 45U, Includes Duct, Black

NF2K-113C-C42 Recommended for Cisco® 6506, 6509, 6513 & 9509 Switches

NF3K-113C-C42 Recommended for Cisco® 9513 Switches

NF4M-113C-C42 Recommended for Juniper EX8208 or EX8216 Switches

Note: Other acessories available.

Network Switch ExhaustDuct guides hot exhaustair from side of network

switch to rear door ofcabinet.


34719-C05 Fiber Trunk Cable Manager, for 45U Cabinet, Black

34707-C05 Vertical Furcation Bracket, for 45U Cabinet, Black

34701-C05 Universal Accessory Rail, for 45U Cabinet, Black

CPI Fiber Management for the N-Series TeraFrame Cabinet

Note: Other sizes and colors available.

http://www.chatsworth.com/uploadedFiles/Files/teraframe_hd_datasheet.pdf

http://www.chatsworth.com/uploadedFiles/Files/TERAFRAME_N-SERIES_DATASHEET.pdf


GF-Series GlobalFrame™ Cabinet

The GF-Series GlobalFrame™ Cabinet System is an easy-to-use, cost-effective computerand network equipment storage solution with high load ratings and a wide variety of thermal, power and cable management accessories to ensure a complete solution for yourapplication.

• Available in three widths, three heights and four depths; 30 standard sizes• Available in two configurations to support front-to-rear of front-to top airflow• An optional Vertical Exhaust Duct guides air from the top of the cabinet to the space

above the drop ceiling• Includes two pairs of adjustable depth equipment rails to provide front and rear

support for 19”EIA rack-mount equipment• UL Listed • Supports up to 3,000 lb of equipment on leveling feet


GF-1A320 42U, 79.3”H x 23.6”W x 41.3”D, 3000 lb Capacity, Black


GF-1B320 42U, 79.3”H x 29.5”W x 41.3”D, 3000 lb Capacity, Black







GF-3B420 48U, 89.8”H x 29.5”W x 47.2”D, 3000 lb Capacity, BlackOther sizes and options available.

Cabinet Systems


M-Series MegaFrame® Cabinet

The M-Series MegaFrame® Cabinet System is a bolted aluminum cabinet that supports a vast array of potentialapplications. The cabinet is available in a variety of heights, widths and depths to meet the most stringent demands.This cabinet allows the user to select mounting rails to accommodate a variety of rack-mount equipment.

• Available in three heights, two widths and four depths• Rack-mount unit (U) marks simplify equipment installation• Avaliable with a choice of tapped #12-24, square-punched SUN® or IBM® rails• All vertical mounting rails are available in half lengths• Bolted construction, delivers fully or partially assembled• UL Listed• Load Rating: 2,000 lb of equipment


M1033-742 84.9”H x 27.3”W x 33.6”D, 45U x 19”EIA x 30”D, Black



Note: Cabinets listed have square-punched mounting rails, single-perforated front and rear doors, single-point latcheswith keyed locks, solid top panel with four cable pass-through ports and two solid side panels. Other styles, sizes andcolors available.

http://www.chatsworth.com/uploadedFiles/Files/GLOBALFRAME_QUICKSHIPvNA(1).pdf

http://www.chatsworth.com/Product_Docs/M-SERIES_cutsheet.PDF

Shelves for Cabinet Systems


Cabinet Systems


Power Distribution Units (PDUs) for Cabinet Systems

CPI’s Power Distribution Units (PDUs) simplify power distribution into racks andcabinets by providing real-time power monitoring to help track power usage acrossthe entire enterprise. The listed Controlled PDU models integrate with CPI’s Scalable Enterprise Management Application (SEMA) software to provide switchedoutlets for remote power cycling and optional by-outlet current monitoring.

Controlled PDUs include circuit breakers, current meters, digital displays, net-work connection, temperature and humidity sensor connection and by-outletmonitoring and control. SEMA-compatible.


35822-583Vertical, 70.5"H, for F-Series TeraFrame Cabinet, Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, 24 IEC C13 outlets and 4 IEC C19 outlets

35812-551Vertical, 70.5"H, for F-Series TeraFrame Cabinet, Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, 24 IEC C13 outlets

35822-5C3Vertical, 70.5"H, for GF-Series GlobalFrame Cabinet, Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, 24 IEC C13 outlets and 4 IEC C19 outlets

35812-5B1 Vertical, 70.5"H, for GF-Series GlobalFrame Cabinet, Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, 24 IEC C13 outlets

35941-132 Temperature & Humidity Sensor

Other power configurations available.


35991-411 Single-phase, 250 VAC, 30 A, NEMA L6-30P plug, NEMA L6-30R connector

35992-421 Dual-input, Single-phase, 250 VAC, 30 A, NEMA L6-30P plugs, NEMA L6-30R connectors

35993-404 Three-phase, 250 VAC, 30 A, NEMA L15-30P plug, L15-30R connector


13517-701 Rack-Mount Cable Shelf, 1U x 19”W, for cabinets equipped with Air Dam Kit to provide front-to-back airflow

11914-719 Sliding Shelf, 2U x 19”W x 32”D, Supports up to 160 lb, Black

11913-719 Sliding Vented Shelf, 2U x 19”W x 32”D,Supports up to 160 lb, Black

12610-719 Fixed Vented Shlef, 1U x 19”W x 20” to 36”D,Supports up to 100 lb, Black

13380-729 LCD Monitor and Shelf, 4-Post, 2U x 19”W,Includes 17” LCD Monitor

13480-719 Keyboard and Tray, 4-Post, 1U x 19”W,Includes Keyboard with Touch Pad

Thermal Accessories for Cabinet Systems -CPI Passive Cooling® Solutions


34370-C00 Vertical Exhaust Duct for F-Series TeraFrame, 20”-24”H

34370-C01 Vertical Exhaust Duct for F-Series TeraFrame, 34”-60”H

34570-C00 Airflow Director for F-Series TeraFrame Cabinets

34573-000 Rear Door Sealing Kit for F-Series TeraFrame Cabinets

34522-C05 Air Dam Kit for 45U F-Series TeraFrame Cabinets

35085-C00 Bottom Panel Kit, for 31.5”D frame, F-Series TeraFrame Cabinets

13571-002 KoldLok® Raised Floor Integral Grommet, 11”W x 1-5/8”H x 8-1/4”D, 10 Pack, Black

34620-C01 Network Switch Exhaust Duct Panel for N-Series TeraFrame Cabinet, 2U to 3U, Black

34537-000 Snap-In Filler Panels for Cabinets with square-punchedrails, 1U x 19”W, Black

25130-703 Bottom Panel Kit for GF-Series GlobalFrame Cabinet, 600 mm W

25150-701 Airflow Director for GF-Series GlobalFrame Cabinet, 600 mm W

25190-001 Cable Port Brush Kit for GF-Series GlobalFrame CabinetsOther options available.

PowerScope In-Line Meter

The PowerScope In-Line Meter lets you upgrade basic and metered PDUs with anin-line ammeter that features network-based current monitoring to track powerusage. Combine PowerScope with basic or metered PDUs, SEMA software andCenterLine or CenterBridge for real-time enterprise-wide IP-based power monitor-ing the entire enterprise. The PowerScope In-Line Meter includes digital displays on single-phase models, network connection, temperature and humiditysensor connection and network current monitoring. SEMA-compatible.

13571-002 35085-C00


http://www.chatsworth.com/uploadedFiles/Files/34370_duct_cut.pdf

http://www.chatsworth.com/uploadedfiles/files/PDU_DATASHEET.pdf

http://www.chatsworth.com/uploadedFiles/Files/35991_powerscope_DATASHEET.pdf

Enterprise Infrastructure Solutions


Scalable Enterprise Management Application (SEMA)

Featuring a graphical display with an intuitive web-based interface that shows map-, room- andrack-level views of your data centers, SEMA provides a single interface for access to rack-mount computers and switches and permits the storage of critical information about each device in a search-able, centralized database to track assets across the entire enterprise. SEMA software provides temperature, humidity and per outlet power monitoring with current-usage reporting and power cycling when used with SEMA-compatible, controlled CPI PDUs. The software permits you to associate CenterLine or CenterBridge and controllable PDUs with individual racks and devices so youcan measure power use by device. SEMA is required for operating CenterLines and CenterBridges.

• Provides enterprise-wide infrastructure management including KVM switching, asset management and power monitoring

• Use with CenterLine, CenterBridge, SEMA-compatible Monitored and Controlled PDUs and PowerScope In-Line Meter

• Intuitive web-based interface with map-, room- and rack-level view of data centers

• Provides browser-based access to computers and network switches attached to CenterLines and CenterBridges

• Stores critical information in a centralized database• Provides temperature, humidity and current monitoring• Provides room-level, per cabinet available RMU, current use and

temperature views to assist with planning

Contact CPI Tech Support for ordering assistance.


35900-102 CenterLine, includes 10 SIM cards, 1 RIM card, 1 LIM card

35900-001 SIM card (one KVM switch port)

35900-002 LIM card (one CenterView KVM Console connection)

35900-003 RIM card (one network user interface card)

35901-214 SIM Cable with video, PS/2, USB and serial connections, 4'L

35901-234 SIM Cable with video, USB and serial connections, 4'L

35901-224 SIM Cable with serial connection, 4'L

35901-112 LIM Cable (LIM card to CenterView), 12'L

CenterLine

CenterLine provides keyboard, video and mouse (KVM) switching for up to 42 devices; add additionalKVM ports as required. Used with the SEMA software, CenterLine provides enterprise-wide KVMswitching and asset management from a single web-based interface. CenterLine offers a verticalpanel with 42 positions for Server Interface Module (SIM) cards, as well as four user interface module card positions for Local Interface Module (LIM) cards and Remote Interface Module (RIM)cards.

• Scalable, 42-port keyboard, video and mouse (KVM) switch• Supports connections for up to 42 devices; add KVM ports (SIM cards) as required• Allows up to four users to simultaneously view different port connections; add one LIM or

RIM card per user• Integrates with CPI’s SEMA software to provide web-based computer access• Local access to connected computers from a separate CenterView KVM

Console using a LIM card

Scalable KVM

over IP switch

used with SEMA

software to

provide up to four

users access to up

to 42 devices

http://www.chatsworth.com/uploadedFiles/Files/KVM-IP_SEMA_APPLIC.pdf

http://www.chatsworth.com/uploadedFiles/Files/35900_CENTERLINE_DATASHEET.pdf

Enterprise Infrastructure Solutions


CenterBridge

CenterBridge is an eight-port keyboard, video and mouse (KVM) switch and controllable PDU that usesonly 1U of space to support up to eight devices. Combine CenterBridge with CPI’s SEMA software aspart of an enterprise KVM switching solution to provide enterprise switching, asset managementand power monitoring from a single web-based interface.

• Rack-mount 1U x 19”EIA x 21"D• Eight-port keyboard, video and mouse (KVM) switch and eight-outlet controlled PDU• Supports connections for up to eight devices using SIM cables• Integrates with CPI’s SEMA software to provide web-based computer access and

power monitoring• Local access to connected computers from a separate CenterView KVM Console


35920-001 CenterView KVM Console

CenterView KVM Console

CenterView KVM Console is a combination LCD flat panel monitor, keyboard and touch pad consolethat provides a single set of peripherals for accessing computer or data storage equipment. The CenterView KVM Console uses less rack-mount space than separate rack-mount LCD panels and keyboard trays, saving valuable rack-mount space for server, storage and switch equipment. Use CenterView with a CenterLine, CenterBridge or another KVM switch to access multiple devices.

• Rack-mount 1U x 19”EIA x 16"D • Combination LCD flat panel monitor, keyboard and touch pad• Folding laptop-style design uses only 1U of space• Stores in the closed position to protect the screen when not in use• Attaches directly to equipment or a KVM switch


35940-802 CenterBridge, includes 8 SIM cards, 1 RIM card, 1 LIM card

35901-214 SIM Cable with video, PS/2, USB and serial connections, 4'L

35901-234 SIM Cable with video, USB and serial connections, 4'L

35901-224 SIM Cable with serial connection, 4'L

35901-112 LIM Cable (LIM card to CenterView), 12'L

Contact your local Accu-Tech representative for part numbers and information.

CenterBridge combination KVM over IP

switch and Controlled PDUand

CenterView KVM Consoleshown installed in F-Series TeraFrame Cabinet

System

http://www.chatsworth.com/uploadedFiles/Files/35940_CENTERBRIDGE_DATASHEET.pdf

http://www.chatsworth.com/uploadedFiles/Files/35920_CENTERVIEW_DATASHEET.pdf

chatsworth products inc. 2011 buyer's guide

Documents