chapter 8. thermodynamics: the second and third law
DESCRIPTION
Chapter 8. THERMODYNAMICS: THE SECOND AND THIRD LAW. ENTROPY. 8.1 Spontaneous Change 8.2 Entropy and Disorder 8.3 Changes in Entropy 8.4 Entropy Changes Accompanying Changes in Physical State 8.5 A Molecular Interpretation of Entropy - PowerPoint PPT PresentationTRANSCRIPT
2013 General Chemistry I 1
Chapter 8. THERMODYNAMICS: THE SECOND AND THIRD LAW
2012 General Chemistry I
ENTROPY
8.1 Spontaneous Change8.2 Entropy and Disorder8.3 Changes in Entropy8.4 Entropy Changes Accompanying Changes in Physical State8.5 A Molecular Interpretation of Entropy8.6 The Equivalence of Statistical and Thermodynamic Entropies8.7 Standard Molar Entropies8.8 Standard Reaction Entropies
2013 General Chemistry I 2
ENTROPY (Sections 8.1-8.8)
- The 1st law of thermodynamics says if a reaction takes place, then the total energy of the universe remains unchanged. It cannot be used to predict the directionality of a process.
- The natural progression of a system and its surroundings (or “the universe”) is from order to disorder, from organized to random.
- A new thermodynamic state function is needed topredict both directionality and extent of disorder.
2013 General Chemistry I 3
Spontaneous change is a change that has a tendency to occur without needing to be driven by an external influence.
- Spontaneous changes need not be fast: e.g. C(diamond) C(graphite); H2(g) + 1/2O2(g) H2O(l)
8.1 Spontaneous Change8.1 Spontaneous Change
Heat flowMixing of gases
2013 General Chemistry I 4
8.2 Entropy and Disorder8.2 Entropy and Disorder
- Energy and matter tend to disperse in a disorderly fashion.
Entropy, S is defined as a measure of disorder.
The second law of thermodynamics:
unit: J·K-1
- Entropy is a state function; the change in entropy of a system is independent of the path between its initial and final states.
The entropy of an isolated system increases in any
spontaneous change.
At constant temperature
2013 General Chemistry I 5
Self-Test 8.1A
Calculate the change in entropy of a large block of icewhen 50. J of energy is removed from it as heat at 0 oCin the freezer.
Solution
S =50. J
273.15 K=
__ 0.18 J K-1
2013 General Chemistry I 6
8.3 Changes in Entropy8.3 Changes in Entropy
- Thermal disorder: arising from the thermal motion of the molecules- Positional disorder: related to the locations of the molecules
S for a process with changing temperature:
→
(CV if V is constant, CP if P is constant)
2013 General Chemistry I 7
S for a reversible, isothermal expansion of an ideal gas
S =qrev
T( wrev)
T
nRT ln(V2/V1)
T
= nR ln V2
V1
_=
S
Hence for the isothermal expansion of an ideal gas,
=
or = nR ln P1
P2
S
2013 General Chemistry I 8
Self-Test 8.2A
The temperature of 1.00 mol He(g) is increased from25.0 oC to 300. oC at constant volume. What is thechange in entropy of the helium? Assume idealbehavior and use Cv,m = 3/2R.
Solution
25.0 oC = 298 K; 300. oC = 573 K
S = nCv,m ln(T2/T1)
= (1.00 mol) x 3 x (8.3145 J mol-1 K-1)2
ln 573 K298 K
x
= +8.15 J K-1
2013 General Chemistry I 9
Self-Test 8.3A
Calculate the change in molar entropy of an ideal gaswhen it is compressed isothermally to one-third itsinitial volume.
Solution
S = nR ln(V2/V1)
= (1.00 mol) x (8.3145 J K-1 mol-1) x ln 0.33
= 9.13 J K-1 mol-1_
2013 General Chemistry I 10
Self-Test 8.4A
Calculate the change in entropy when the pressureof 1.50 mol Ne(g) is decreased isothermally from20.00 bar to 5.00 bar. Assume ideal behavior.
Solution
S = nR ln(P1/P2)
= (1.50 mol) x (8.3145 J K-1 mol-1) x ln20.00 bar
5.00 bar
= + 17.3 J K-1
2013 General Chemistry I 11
EXAMPLE 8.5 In an experiment, 1.00 mol Ar(g) was compressedsuddenly (and irreversibly) from 5.00 L to 1.00 L by driving in a piston.and in the process its temperature was increased from 20.0 oC to 25.2 oC.What is the change in entropy of the gas?
To solve this problem, we consider tworeversible stages between initial and final states. Then S(irrev) = S(rev 1) +S(rev 2).
2013 General Chemistry I 12
8.4 Entropy Changes Accompanying Changes 8.4 Entropy Changes Accompanying Changes in Physical Statein Physical State
- Phase transition: solid → liquid, Tf (fusion or melting point)liquid → solid, Tb (boiling point)
- At the transition temperature (such as Tb),
The temperature remains constant as heat is supplied.
The transfer of heat is reversible.
The heat supplied is equal to the enthalpy change due to the
constant pressure (at 1 atm).
Entropy of vaporization, Svap
qrev = Hvap
> 0 in all cases
2013 General Chemistry I 13
Some Standard entropies of vaporization at Tb
(Table 8.1)
- Standard entropy of vaporization, Svapo :
Svap at 1 bar
2013 General Chemistry I 14
Trouton’s rule: Svapo = ~85 J·K-1mol-1
There is approximately the same increase in positional disorder for most liquids when evaporating.
- Exceptions; water, methanol, ethanol, ··· due to extensive hydrogen bonding in liquid phases
- Standard entropy of fusion, Sfuso
> 0 in all cases
2013 General Chemistry I 15
Temperature dependence of Svapo
-To determine the entropy of vaporization of water at 25 oC(not at Tb), we can use an entropy change cycle:
Svap(25 oC) = S1(liq. heating; 25 oC Tb)+ Svap(Tb)+ S2(vap. condensing: Tb 25 oC)
Liquid (Tb = 100 oC) Vapor (Tb)
Liquid (25 oC) Vapor (25 oC)
S1 = nCp,m(liq.) ln S2 = nCp,m(vap.) ln
Svap(Tb) = Hvap/Tb
Svap(25 oC)o
373.15 K
298.15 K 373.15 K
298.15 K
2013 General Chemistry I 16
Calculate the standard entropy of vaporization of water at 85 oC, given
that its standard entropy of vaporization at 100 oC is 109.0 J·K-1·mol-1 and
the molar heat capacities at constant pressure of liquid water and water
vapor are 75.3 J·K-1·mol-1 and 33.6 J·K-1·mol-1, respectively, in this range.
297s
Exercise 8.43
Solution
2013 General Chemistry I 17
8.5 A Molecular Interpretation of Entropy8.5 A Molecular Interpretation of Entropy
The third law of thermodynamics
S → 0 as T → 0
Boltzmann formula
- statistical entropy: S = kB ln W kB = 1.381 × 10-23 J·K-1 = R/NA
- W : the number of microstates the number of ways that the atoms or molecules in the sample can be arranged and yet still give rise to the same total energy
- When we measure the bulk properties of a system, we are measuring an average taken over the many microstates (ensemble) that the system has occupied during the measurement.
2013 General Chemistry I 18
EXAMPLE 8.7
Calculate the entropy of a tiny solid made up of four diatomic molecules
of a compound such as carbon monoxide, CO, at T = 0 when (a) the four
molecules have formed a perfectly ordered crystal in which all molecules
are aligned with their C atoms on the left and (b) the four molecules lie
in random orientations, but parallel.
(a) 4 CO molecules perfectly ordered:
(b) 4 CO in random, but parallel:
(c) 1 mol CO in random, but parallel:
2013 General Chemistry I 19
- Residual entropy at T = 0, arising from positional disorder
4.6 J·K-1 for the entropy of 1 mol CO < 5.76 J·K-1
Nearly random arrangement due to a small electric dipole moment
- Solid HCl; S ~ 0 at T = 0 due to the bigger dipole momentleading strict head-to-tail arrangement
2013 General Chemistry I 20
EXAMPLE 8.8
The entropy of 1.00 mol FClO3(s) at T = 0 is 10.1 J·K-1. Interpret it.
4 orientations possible
nearly random arrangement
2013 General Chemistry I 21
8.6 The Equivalence of Statistical and 8.6 The Equivalence of Statistical and Thermodynamic EntropiesThermodynamic Entropies
Thermodynamic entropy
S = qrev/T
behavior of bulk matter
Statistical entropy
S = k ln W
behavior of molecules=
- Consider a one-dimensional box, for the statistical entropy,
• At T = 0, only the lowest energy level occupied → W = 1 and S = 0
• At T > 0, W > 1 and S > 0
• When the box length is increased at constant T, the molecules are distributed across more levels. → W and S increase.
2013 General Chemistry I 22
- W = constant × V
- For N molecules,
- The change when a sample expands isothermally from V1 to V2 is,
= nR lnV2
V1
- By raising the temperature,
The molecules have access to larger number ofenergy levels → W and S increase.
2013 General Chemistry I 23
- The equations used to calculate changes in the statistical entropy and the thermal entropy lead to the same result.
1. Both are state functions.
3. Both increase in a spontaneous change.
2 × no. of molecules = entropy changes from k ln W to 2k ln W
Number of microstates depends only on its current state.
2. Both are extensive (dependent on “extent”) properties.
4. Both increase with temperature.
In any irreversible change, the overall disorder increases→ no. of microstates increases.
When T increases, more microstates become accessible.
2013 General Chemistry I 24
If SO2F2 adopts a disordered arrangement in its crystal form, what
would its residual molar entropy be?
302s
Exercise 8.27
Solution
2013 General Chemistry I 25
8.29 Which substance in each of the following pairs has the
higher molar entropy at 298 K: (a) HBr(g) or HF(g); (b) NH3(g)
or Ne(g); (c) I2(s) or I2(l); (d) 1.0 mol Ar(g) at 1.00 atm or 1.0
mol Ar(g) at 2.00 atm?
302sExercise 8.29
Solution
2013 General Chemistry I 26
List the following substances in order of increasing molar
entropy at 298 K: H2O(l), H2O(g), H2O(s), C(s, diamond). Explain
your reasoning.
302sExercise 8.31
Solution
2013 General Chemistry I 27
Which substance in each of the following pairs would you expect to
have the higher standard molar entropy at 298 K? Explain your
reasoning: (a) Iodine vapor or bromine vapor;
(b) the two liquids cyclopentane and 1-pentene;
(c) ethene (ethylene) or an equivalent mass of polyethylene, a
substance formed by the polymerization of ethylene.
302sExercise 8.33
Solution
2013 General Chemistry I 28
Without performing any calculations, predict whether there is an
Increase or a decrease in entropy for each of the following
processes:
(a)Cl2(g) + H2O(l) → HCl(aq) + HClO(aq);
(b)Cu3(PO4)2(s) → 3 Cu2+(aq) + 2 PO43-(aq);
(c)SO2(g) + Br2(g) + 2 H2O(l) → H2SO4(aq) + 2 HBr(aq).
302sExercise 8.35
Solution
2013 General Chemistry I 29
8.7 Standard Molar Entropies8.7 Standard Molar Entropies
For heating at constant P,
CP and CP/T → 0as T → 0
Molar entropy, S(T), can be determined from measurement of Cp at different temperatures.
2013 General Chemistry I 30
Standard molar entropy, Smo is the molar entropy of the
pure substance at 1 bar.
2013 General Chemistry I 31
- Diamond (2.4 J·K-1) vs. lead (64.8 J·K-1):
rigid bonds vs. vibrational energy levels
- H2 (130.7 J·K-1) vs. N2 (191.6 J·K-1):
the greater the mass, the closer energy levels
light heavy
- CaCO3 (92.9 J·K-1) vs. CaO (39.8 J·K-1):
large, complex vs. smaller, simpler
- In general, Smo: gases >> liquids > solids
Related to freedom of movement and disordered state
Standard molar entropy, Smo :
2013 General Chemistry I 32
8.8 Standard Reaction Entropies8.8 Standard Reaction Entropies
Standard reaction entropy, So, is the difference
between the standard molar entropies of the products
and those of the reactants, taking into account their
stoichiometric coefficients.
2013 General Chemistry I 33
EXAMPLE 8.9 Calculate So for N2(g) + 3H2(g) → 2NH3(g) at 25 oC.
2013 General Chemistry I 34
307s
Use data in Table 8.3 or Appendix 2A to calculate the standard reaction
entropy for each of the following reactions at 25 C. Interpret the sign and
magnitude of the reaction entropy. (a) The formation of 1.00 mol H2O(l)
from the elements in their most stable state at 298 K. (b) The oxidation of
1.00 mol CO(g) to carbon dioxide. (c) The decomposition of 1.00 mol
calcite, CaCO3(s), to carbon dioxide gas and solid calcium oxide. (d) The
decomposition of potassium chlorate: 4 KClO3 (s) 3 KClO4 (s) + KCl (s)
Exercise 8.35
2013 General Chemistry I 35
307sSolutions
2013 General Chemistry I 36
307s
2013 General Chemistry I 37
Chapter 8. THERMODYNAMICS: THE SECOND AND THIRD LAW
2012 General Chemistry I
GLOBAL CHANGES IN ENTROPY8.9 The Surroundings8.10 The Overall Change in Entropy8.11 Equilibrium
GIBBS-FREE ENERGY
8.12 Focusing on the System8.13 Gibbs Free Energy of Reaction8.14 The Gibbs Free Energy and Nonexpansion Work8.15 The Effect of Temperature8.16 Impact on Biology: Gibbs Free Energy Changes in Biological Systems
2013 General Chemistry I 38
GLOBAL CHANGES IN ENTROPY(Sections 8.9-8.11)
8.9 The Surroundings8.9 The Surroundings
- The second law refers to an isolated system (system + surroundings = universe).
- Only if the total entropy change is positive will theprocess be spontaneous.
2013 General Chemistry I 39
Sometimes Ssurr can be difficult to compute, but in generalit can be obtained from the enthalpy change for the process(that is, of the system).
2013 General Chemistry I 40
Self-Test 8.14A
Calculate the entropy change of the surroundingswhen 1.00 mol H2O(l) vaporizes at 90 oC and 1 bar.Take the enthalpy of vaporization of water as +40.7kJ mol-1.
Solution
Ssurr = H/T
=
_
_ ( +40 700 J mol-1)
90 oC = 363 K
363 K
= _ 112 J K-1
2013 General Chemistry I 41
8.10 The Overall Change in Entropy8.10 The Overall Change in Entropy
- To use the entropy to
judge the direction of
spontaneous change, we
must consider the
change in the entropy of
the system plus the
entropy change in the
surroundings:
-Spontaneous exothermic
(H<0) reactions:
2013 General Chemistry I 42
EXAMPLE 8.11 Is the reaction spontaneous at 298 K?
2 Mg(s) + O2(g) → 2 MgO(s) So = -217 J·K-1 Ho = -1202 kJ
The reaction is spontaneous
2013 General Chemistry I 43
-Spontaneous endothermic (H>0) reactions:
There can still be an overall increase in entropyif the disorder of the system increases enough.
Summary
2013 General Chemistry I 44
- A process produces maximum work if it takes place reversibly.
Clausius inequality
S = > S
- For an isolated system (universe), q = 0
The entropy of an isolated system cannot decrease.
- For two given states of the system,ΔS is a state
function (path-independent) but ΔStot is not.
(See EXAMPLE 8.12)
2013 General Chemistry I 45
EXAMPLE 8.12
Calculate S, Ssurr, and Stot for (a) the isothermal, reversible expansion and (b) the isothermal, free expansion of 1.00 mol of ideal gas molecules from 8.00 L to 20.00 L at 292 K. Explain any differences between the two paths.
(a) Isothermal reversible expansion at 292 K
2013 General Chemistry I 46
(b) Isothermal free expansion 292 K
2013 General Chemistry I 47
312s
Initially a sample of ideal gas at 323 K occupies 1.67 L at 4.95 atm.
The gas is allowed to expand to 7.33 L by two pathways:
(a) isothermal, reversible expansion (b) isothermal, irreversible free
expansion.
Calculate ΔStot, ΔS, ΔSsurr for these pathways.
Exercise 8.49
2013 General Chemistry I 48
2013 General Chemistry I 49
8.11 Equilibrium8.11 Equilibrium
Dynamic equilibrium is one where there is no net tendency to change but microscopic forward and reverse processes occur at matching rates.
Thermal equilibrium: no net flow of energy as heat
Mechanical equilibrium: no tendency to expand or contract
Chemical equilibrium: no net change in composition
at thermodynamic equilibrium
2013 General Chemistry I 50
GIBBS FREE ENERGY(Sections 8.12-8.16)
8.12 Focusing on the System8.12 Focusing on the System
- at constant T and P
Gibbs free energy, G G = H - TS
- Change in Gibbs free energy
at constant T and P-
The direction of spontaneous change is the direction ofdecreasing Gibbs free energy.
2013 General Chemistry I 51
2013 General Chemistry I 52
Gsys < 0 Spontaneous, irreversible
Gsys = 0 Reversible
Gsys > 0 Nonspontaneous
at constant T and P
- the condition for equilibrium, Stot = 0, and
G = 0 at constant T and P
2013 General Chemistry I 53
2013 General Chemistry I 54
EXAMPLE 8.13
Calculate the change in molar Gibbs free energy, Gm, for the processH2O(s) → H2O(l) at 1 atm and (a) 10 oC; (b) 0 oC. Decide for eachtemperature whether melting is spontaneous or not. Treat Hfus andSfus as independent of temperature.
(a) At 10 oC,
= -0.22 kJ·mol-1 < 0; spontaneous melting
2013 General Chemistry I 55
(b) At 0 oC,
equilibrium (reversible)
2013 General Chemistry I 56
- G decreases as its T is raised at constant P.
G↓ = H – T↑S ; H and S vary little with T, S > 0
- Decreasing rate of Gm: vapor >> liquid > solid
Sm(vapor) >> Sm(liquid) > Sm(solid)
Variation of G with temperature: phasetransitions
In most cases (opposite), heatingleads to melting, then boiling.
2013 General Chemistry I 57
In some cases, at certain pressures,G for the liquid may never be lowerthan those of the other two phases.The liquid phase is unstable and thephase transition is solid to vapor (sublimation).
2013 General Chemistry I 58
8.13 Gibbs Free Energy of Reaction8.13 Gibbs Free Energy of Reaction
Gibbs free energy of reaction
Standard Gibbs free energy of reaction (standard state: pure form at 1 bar)
- Go is fixed for a given reaction and temperature.
- G depends on the composition of the reaction mixture and so it varies – and might even change sign as the reaction proceeds.
2013 General Chemistry I 59
Standard Gibbs free energy of formation, Gfo , is the
standard Gibbs free energy of reaction per mole for the formation of a compound from its elements in their most stable form.
- For the most stable forms of elements, Gfo = 0
E.g. Gfo(I2, s) = 0; Gf
o(I2, g) > 0
Examples of most stable forms of elements(Table 8.6)
2013 General Chemistry I 60
Some Standard Gibbs free Energies of Formation at25 oC (kJ mol-1) (Table 8.7)
2013 General Chemistry I 61
EXAMPLE 8.14
Calculate the standard Gibbs free energy of formation of HI(g) at 25 oCfrom its standard molar entropy and standard enthalpy of formation.
2013 General Chemistry I 62
- Thermodynamically stable compound;
- Thermodynamically unstable compound;
• Stable and unstable: thermodynamic tendency to
decompose into its elements• Labile, nonlabile, and inert: the rate at which a
thermodynamic tendency to react is realized
but nonlabile or even inert
- Another solution for standard Gibbs free energies of reaction:
Thermodynamic stability and reactivity
2013 General Chemistry I 63
EXAMPLE 8.15
Calculate the standard Gibbs free energy of the reaction
4 NH3(g) + 5 O2(g) → 4 NO(g) + 6 H2O(g)
and decide whether the reaction is spontaneous under standardconditions at 25 oC.
The reaction isspontaneous
2013 General Chemistry I 64
8.14 The Gibbs Free Energy and Nonexpansion 8.14 The Gibbs Free Energy and Nonexpansion WorkWork
- The Gibbs free energy is a measure of the energy free to do nonexpansion work.
2013 General Chemistry I 65
E.g. Bioenergetics of glucose oxidation
- The maximum nonexpansion work obtainable from 1 mol of glucose is +2879 kJ at 1 bar.
- 180 g of glucose can be used to build 170 (= 2879/17) mole of peptide links.
In practice, only about 10 moles of peptide links can be built.
- If we know the change in Gibbs free energy of a process taking place at constant T and P, then we immediately know how much nonexpansion work it can do.
2013 General Chemistry I 66
8.15 The Effect of Temperature8.15 The Effect of Temperature
- The values of Ho and So do not change much with temperature.
- However, Go does depend much on temperature.
Go = Ho - TSo
1) For an exothermic reaction (Ho<0) with So<0 (disorder decrease L-R),
Go<0 at low Tbut it may become >0 at high T.
2013 General Chemistry I 67
3) For an endothermic reaction (Ho>0) with So<0,
Go>0 at all Tand the reaction is never spontaneous.
2) For an endothermic reaction (Ho>0) with So>0 (disorder increase L-R),
Go>0 at low Tbut it may become <0 at high T.
2013 General Chemistry I 68
4) For an exothermic reaction (Ho<0) with So>0,
Go<0 at all Tand the reaction is always spontaneous.
The Gibbs free energy increases with T for reactions with a negative So and decreases with T for reactions with a positive So.
2013 General Chemistry I 69
EXAMPLE 8.16
Estimate T at which it is thermodynamically possible for carbon toreduce iron(III) oxide to iron under standard conditions by theendothermic reaction, 2Fe2O3(s) + 3C(s) 4Fe(s) + 3CO2(g)
, above 565 oC
2013 General Chemistry I 70
8.16 Impact on Biology: Gibbs Free Energy 8.16 Impact on Biology: Gibbs Free Energy Changes in Biological SystemsChanges in Biological Systems
- A reaction that produces a lot of entropy can drive another nonspontaneous reaction forward.
- A process may be driven uphill in Gibbs free energy by another reaction that rolls downhill.
2013 General Chemistry I 71
Hydrolysis of adenosine triphosphate (ATP) to adenosine
diphosphate (ADP): the reaction used for driving
nonspontaneous biochemical reactions
- The nonspontaneous reaction restoring of ATP from ADP is driven by the food we eat.
2013 General Chemistry I 72
The End!
2013 General Chemistry I 73
Thank you for listening to this lecture, Thank you for listening to this lecture,
and please continue to and please continue to General General
Chemistry IIChemistry II
to know a variety of Green World!to know a variety of Green World!