APPROVEDBSEN 1329 / 1401 / BS 5255BSEN 1452-2 / EN1519

CERT GMBH

15

and fittings

and fittings

and fittings and PEX pipes

SASO Certificate for PPR , PE , UPVC pipes and fittingsNSF Certificate for CPVC Pipes & FittingsKite MARK certificate for MUPVC Waste Pipes to BS 5255

و قطع

و قطع

ـمدعم شبكيا و أنابيب البولي ا إليثيلني ال(PEX)

(PEX)

ـمدعم شبكيا النابيب البولي ا يثيلني ال

البولي و ايثلني بروبلني، البولي البولي شهادة (SASO) النابيب و قطع فينيل كلوريد.

CPVC النابيب و قطع ال (NSF) شهادةافقة مع املتو البولي فينيل كلوريد شهادة اجلودة البريطانية (Kite MARK) النابيب

املو اصفة (BS5255) للصر ف الصحي.

This is to certify that the quality management system of: COSMOPLAST INDUSTRIAL COMPANY LLC Main Site: Plot No. 35H5, 36H5, H5 ICAD-1, P.O. Box 8593, Abu Dhabi, United Arab Emirates has been registered by Intertek as conforming to the requirements of:

ISO 9001:2015

The management system is applicable to:

Manufacture and Sale of Pipeline System Products covering: Polyvinyl Chloride (PVC) Pipes and Fittings, Polyethylene (PE) Pipes and Fittings, Cross linked Polyethylene (PEX) Pipes and Fittings, Poly Propylene (PP) Pipes and Fittings, Pre Insulated Pipes and Fittings.

1st Surveillance Audit Due: From 09 July 2018 to 09 August 2018

Certificate Number: QMS 180302 - 01

Initial Certification Date: 04 June 2003

Date of Certification Decision: 09 March 2018

Issuing Date: 09 March 2018

Valid Until: 26 May 2021

Calin Moldovean President Business Assurance Intertek Certification Limited, 10A Victory Park, Victory Road, Derby DE24 8ZF Intertek Certification Limited is a UKAS accredited body under schedule of Accreditation No. 014

In the issuance of this certificate, Intertek assumes no liability to any party other than to the Client, and then only in accordance with the agreed upon Certification Agreement. This certificate’s validity is subject to the organization maintaining their system in accordance with Intertek’s requirements for systems certification. Validity may be confirmed via email at certificate.validation@intertek.com or by scanning the code to the right with a smartphone. The certificate remains the property of Intertek, to whom it must be returned upon request.

6

Cosmoplast drip irrigation pipe is made of a black, bimodal linerar low- density polythylene, with an optimum balance between flexibility and strength. It has a high average molecular weight giving good toughness and impact restistance even at low temperatures. This type of low-density polythylene is recommended for irrigation systems where flexibility and coil-ability is of importance. The company also supplies drip pipes made to customer specific standards. PE pipes of sizes ranging from 16mm up to 1200mm and uPVC pipes from 20mm up to 1200mm are also available supplied by Cosmoplast for irrigation applications. Landscape and lown edging is also manufactures as a part of the irrigation systems supplied by Cosmoplast.

أنابيب الري بالتنقيط كوزموبالست مصنوعة من البولي إثيلني منخفض الكثافة اخلطي منخفض الكثافة، مع التوازن األمثلويغ اجلزيئي عالية بني فلكبيليتي و سترنغث لديها متوسط حرارة درجات في حتى تأثير ومقاومة توغنيس جيدة تعطي الكثافة منخفض ايثيلني البولي من النوع منخفضة.هذا .يوصى ألنظمة الري حيث املرونة ولفائف القدرة هي ذات أهمية

Cosmoplast offers comprehensive solutions forthis through its extensive range of casings and

Ver

sion

2 –

Issu

e 4

– A

pril

2018