ccnav3.3 306
TRANSCRIPT
-
8/6/2019 CCNAV3.3 306
1/24
1
CCNA Semester 3
Chapter 06Chap
ter 06
SPANNING TREESPANNING TREEPROTOCOLPROTOCOL
-
8/6/2019 CCNAV3.3 306
2/24
2
ObjectivesObjectives
Define redundancy and its importance innetworking
Describe the spanning tree in a redundant-
path switched network
-
8/6/2019 CCNAV3.3 306
3/24
3
Table of ContentTable of Content
1 Redundant topologies2 Spanning tree protocol
-
8/6/2019 CCNAV3.3 306
4/24
4
REDUNDANT TOPOLOGIESREDUNDANT TOPOLOGIES
-
8/6/2019 CCNAV3.3 306
5/24
5
Redundant switched topologiesRedundant switched topologies
Segment 1
Segment 2
Switch A Switch B
Router YServer/Host X
-
8/6/2019 CCNAV3.3 306
6/24
6
Broadcast stormsBroadcast storms
Segment 1
Segment 2
Switch A Switch B
Router YServer/Host X
-
8/6/2019 CCNAV3.3 306
7/247
Multiple frame transmissionsMultiple frame transmissions
-
8/6/2019 CCNAV3.3 306
8/248
Media access control database instabilityMedia access control database instability
-
8/6/2019 CCNAV3.3 306
9/249
SPANNING TREE PROTOCOLSPANNING TREE PROTOCOL
-
8/6/2019 CCNAV3.3 306
10/24
-
8/6/2019 CCNAV3.3 306
11/241
Spanning Tree ProtocolSpanning Tree Protocol
The ST Algorithm, implemented by the STP,
prevents loops by calculating a stablespanning-tree network topology.
Spanning-tree frames, called bridge protocoldata units (BPDUs), are sent and receivedby all switches in the network at regularintervals and are used to determine thespanning-tree topology.
-
8/6/2019 CCNAV3.3 306
12/241
Provides a loop-free redundant network topologyplacing certain ports in the blocking state.
Spanning-Tree ProtocolSpanning-Tree Protocol
-
8/6/2019 CCNAV3.3 306
13/241
One root bridge per network
One root port per nonroot bridge
One designated port per segment
Nondesignated ports are unused
Spanning-Tree Operation
-
8/6/2019 CCNAV3.3 306
14/241
Bpdu = Bridge Protocol Data Unit
(default = sent every two seconds)
Root bridge = Bridge with the lowest bridge ID
Bridge ID =
Spanning-Tree Protocol Root Bridge Selection
-
8/6/2019 CCNAV3.3 306
15/241
Spanning-tree transits each portthrough several different states:
Spanning-Tree Port StatesSpanning-Tree Port States
-
8/6/2019 CCNAV3.3 306
16/241
Spanning-Tree Port States (Cont.)
-
8/6/2019 CCNAV3.3 306
17/241
Spanning-Tree Path Cost
-
8/6/2019 CCNAV3.3 306
18/241
Spanning-Tree Example
-
8/6/2019 CCNAV3.3 306
19/241
Spanning-Tree RecalculationSpanning-Tree Recalculation
-
8/6/2019 CCNAV3.3 306
20/242
Spanning-Tree ConvergenceSpanning-Tree Convergence
Convergence occurs when all the switch andbridge ports have transitioned to either theforwarding or the blocking state.
When the network topology changes,switches and bridges must recompute theSpanning-Tree Protocol, which disrupts usertraffic.
-
8/6/2019 CCNAV3.3 306
21/24
2
Rapid Spanning-Tree ProtocolRapid Spanning-Tree Protocol
-
8/6/2019 CCNAV3.3 306
22/24
2
Rapid Transition to Forwarding
-
8/6/2019 CCNAV3.3 306
23/24
2
SummarySummary
The benefits and risks of a redundant topology
The role of spanning tree in a redundant-pathswitched network
-
8/6/2019 CCNAV3.3 306
24/24
Q&AQ&A