ccna 3 chapter 7 switch configuration

www.ciscopress.comCopyright 2003

CCNA 3 Chapter 7

Switch Configuration

By

Your Name


Objectives

• Starting the switch

• Configuring the switch


LAN Design Goals

• Functionality• Scalability • Adaptability

• Manageability


Physical Startup of Catalyst Switches

• Switches typically have no power switch to turn them on and off.

• They simply connect or disconnect from a power source.


Switch LED Indicators


Verifying Port LEDs During Switch POST


Connecting a Switch to a PC


Help in the CLI


The show Command


Configuring the Switch


Verifying the Catalyst Switch Default Configuration

• show running-config

• show interface

• show vlan

• show flash

• show version


Switch Configuration

• To overwrite any existing configuration, follow these steps:

1. Remove any existing VLAN information by deleting the VLAN database file. vlan.dat from the Flash memory directory.

2. Erase the backup configuration file startup-config.

3. Reload the switch.


Configuring the Catalyst Switch


Managing the MAC Address Table

Switches learn the MAC addresses of PCs or workstations that are connected to their switch ports by examining the source address of frames that are received on that port.


Configuring Static MAC Addresses


Configuring Port Security


Adds, Moves, and Changes


Managing Switch Operation

• An administrator should document and maintain the operational configuration files for networking devices.

• The most recent running-configuration file should be backed up on a server or disk.

• The Cisco IOS Software should also be backed up to a local server. The Cisco IOS Software can then be reloaded to Flash memory if needed.


Passwords

• For security and management purposes, passwords must be set on the console and vty lines.

• An enable password and an enable secret password must also be set.

ccna 3 chapter 7 switch configuration

Documents