catia - parametric - centrale nanteschablat/emaro/catia_parametric.pdf · parameters. 18: rename...
TRANSCRIPT
CATIA - PARAMETRIC
1: Open a new file2: Insert a new body
3: Rename this body: third button on the name
4: Sketch a new profil in the plan yz
5: Add some Symmetry constraintsSelect the two lines first then the symmetry axis
Draw the profile of the beam
6: Create all the dimensionnal constraints
7: Edit the cotation and enter the correct values
8: Exit the sketcher
9: Extrude the profile
10: Choose a length
11: Select a profile
Extrude the profile
12: Create a edge fillet with constant radius
13: Enter a value
14: Select the edges
Create the edge fillet
15: Select the iconF(x)
16: Choose a lengthtype parameter
17: Create a new parameter
Create the parameters
18: Rename the parameter b
19: Enter its value
20: Select “Apply” to confirm the parameter creation
21: Do the same for the other parameters: h, e1, e2 and r
22: Validate with OK
Vizualise the variables in the Design Tree
23: Select Tools + Options
24: Select Part Infrastructure
25: Select Display
26 : Tick optionParameters
27: Select Tools + Options
28: Select Parameters and Measure
29: Tick optionWith value
Vizualise the variables in the Design Tree with the value
Associate each variable with their corresponding parameter
30: Double click on Sketch.1
31: Choose a cotation and validate the option
Edit Formula
32: Establish an equality relation between the height of the beam and the variable h
33: Symbole f(x) and “grey colour” indicate that the height parameter is driven by the h variable
Creation of a family of beam
34: Select the icon Design table
35: Select the option
A dialog box appears
36: Select the parameters
37: Insert with the arrows
38: Confirm the creation name and format
The parameters table has been created
39: Edit the table
The parameters table is open with the editor and we can add some new values in rows
Modifications are imported into CATIA
40: Close
Parameters table has been modified
41: Confirm with OK
42: Select Option + tools
Display the relation in the Design tree
43: Select Part Infrastructure
44: Tick optionRelations
Change the parameters
44: Double click onDesign Table
45: SelectApply to vizualize the result
46: Confirm with OK