catalogue 2012-2013

C o n t e n t s
1. Housings - Server, Patch and Co-location racks (VARICON) 3
2. Housings - LANRack (VARICON) 69

3. Housings - Wall enclosures (VARICON) 81

4. Cooling (VARICONDITION) 95

5. Monitoring (VARICONTROL) 99

6. Power distribution (VARICONPOWER) 107

service fore

RICONH O U S I N G S O L U T I O N S

V ®

VARICON-M

line with adv

structured ca

VARICON-LA

FLEXIB

most.

anced design. The Varicon-M

talogue and digital tools.

NRACK

VARICON-WALL ENCLOSURES

for full access and ease of use.

LE HOUSING SOLUTIONS

Minkels searches together with you

for the best solution for your

CATALOGUE 2012-2013H

ou

sin

gs

- Se

rver

, Pat

ch a

nd

Co

-lo

cati

on

rac

ks (

VA

RIC

ON

)

Pre

-ass

em

ble

d

Co

mp

on

en

ts

Ca

ble

ma

na

ge

me

nt

Air

flo

w o

pti

ma

lisa

tio

n r

ack

Acc

ess

ori

es

Housings - Server, Patch and Co-location racks (VARICON)

4

1
Pre-assembled
Server racks 600mm wide

The universal server racks can be delivered within 24 hours, if

ordered before 11.00 a.m. A distinction is made between stand-alone

racks and co-location racks. Removeable side panels are supplied with

the stand-alone racks. Instead of side panels, linking sets are supplied

with the co-location racks.

SpecificationsAvailable in RAL colours 9011 (black) and 7047 (grey).

Fitted with 80%-perforated front and rear doors.

The doors are right-hung and fitted with a two-point Fix-easy swivel

handle with an EK-333 cylinder lock.

There are three recesses in the top of the cabinet which are fitted with

two protective plates and a cable bushing brush set.

The cabinet is fitted with four universal 19-inch profiles. These profiles

are fitted 80 mm from the front of the cabinet and at 740 mm intervals

as standard.

The racks are supplied with 20 cage nuts and 20 decorative screws.

The racks are fully grounded.

The load-bearing capacity of the racks with a width of 600 mm is 1000

kg.

ApplicationCompact server cabinet with a high load-bearing capacity on a small

surface area.

Width: 600mm

Depth: 1000mm

Unit Height

U mm Colour Door front and rear side Description Part. no.

41 2000 RAL 7047 80% perforated Stand-alone incl. side panels VME206010S

41 2000 RAL 7047 80% perforated Baying type incl. baying kit VME206010C

41 2000 RAL 9011 80% perforated Stand-alone incl. side panels VME206010SB

41 2000 RAL 9011 80% perforated Baying type incl. baying kit VME206010CB

46 2200 RAL 7047 80% perforated Stand-alone incl. side panels VME226010S

46 2200 RAL 7047 80% perforated Baying type incl. baying kit VME226010C

46 2200 RAL 9011 80% perforated Stand-alone incl. side panels VME226010SB

46 2200 RAL 9011 80% perforated Baying type incl. baying kit VME226010CB

5


Patch and server racks 800mm wide

The universal server cabinets can be delivered within 24 hours, if

ordered before 11.00 a.m. A distinction is made between stand-alone

cabinets and co-location cabinets. Removeable side panels are supplied

with the stand-alone cabinets. Instead of side panels, linking sets are

supplied with the co-location cabinets.

SpecificationsAvailable in RAL colours 9011 (black) and 7047 (grey).

Cabinets which are 1000 mm deep or more are fitted with 80%-

perforated front and rear doors.

Cabinets which are 800 mm deep are fitted with a clear glass front door

and a false rear door.

The doors are right-hung and fitted with a two-point Fix-easy swivel

handle with an EK-333 cylinder lock.

There are three or four recesses in the top of the cabinet which are

fitted with two or three protective plates and a cable bushing brush set.

The cabinets are fitted with four universal 19-inch profiles. These

profiles are fitted 80 mm from the front of the cabinet and at 740 mm

intervals as standard. In the case of the 800 mm-deep cabinets, the

profiles nearest to the back are mounted at 87.5 mm.

The cabinets are supplied with 20 cage nuts and 20 decorative screws.

The cabinets are fully grounded.

The load-bearing capacity of the 800 mm-wide cabinets is 850 kg.

Accessory packs are available for these patch and server racks.

ApplicationThe 800 mm-wide cabinets are very well suited for use with patching,

network and server equipment.

Width: 800mm

Unit Height Depth

U mm mm Colour

Door front and

rear side Description Part. no.

25 1300 800 RAL 7047 Clear glass - metal Stand-alone incl. side panels

VME138080S


VME138080SB

25 1300 1000 RAL 7047 80% perforated Stand-alone incl. side panels

VME138010S


VME138010SB


VME208080S

41 2000 800 RAL 7047 Clear glass - metal Baying type incl. baying kit

VME208080C


VME208080SB

Minkels catalogue United Kingdom, English. Subject to change without notice. Contact our Sales Department for additional information.

6

1


VME208080CB


VME208010S

41 2000 1000 RAL 7047 80% perforated Baying type incl. baying kit

VME208010C


VME208010SB


VME208010CB


VME208012S


VME208012C


VME208012SB


VME208012CB


VME228080S


VME228080C


VME228080SB


VME228080CB


VME228010S


VME228010C


VME228010SB


VME228010CB


VME228012S


VME228012C


VME228012SB


VME228012CB

Unit Height Depth

U mm mm Colour

Door front and

rear side Description Part. no.

7


What’s in the box: Products including mounting materials

Express accessory packs

The accessory packs have been put together specifically for guiding

network cables in 800 mm wide patch and server racks. Packs have been

put together based on the amount of cabling and its type (copper /

glass). A distinction is made between the "Basic" and "Plus" packs. The

"Plus" packs also provide for the feeding of active network equipment.

The packs are not mounted on the racks at the factory.

"Copper Basic" accessory packsThe following products are included in this pack: 4 (25U) or 6 (41/46U)

shunting couplings (85 mm wide x 165 mm deep), 1 x 200 mm cable tray,

20 pieces of Velcro and 100 M5 cage nuts with decorative screws.

"Copper Plus" accessory packsThe following products are included in this pack: 8 (25U) or 12 (41/46U)

shunting couplings (85 mm wide x 165 mm deep), 2 x 300 mm cable

trays, 40 pieces of Velcro, 100 M5 cage nuts with decorative screws, 1

cable bushing brush set for in the top of the cabinet and 1 horizontal 19-

inch power strip with 7 BS 1363 connections.

"Fibre Basic" accessory packsThe following products are included in this pack: 2 cable guide profiles

(whole height of the rack) with 10 cable guides, 1 x 200 mm cable tray,

20 pieces of Velcro and 100 M5 cage nuts with decorative screws.

"Fibre Plus" accessory packsThe following products are included in this pack: 2 cable guide profiles

(whole height of the rack) with 10 cable guides, 2 x 300 mm cable trays,

40 pieces of Velcro, 100 M5 cage nuts with decorative screws, 1 cable

bushing brush set for in the top of the cabinet and 1 horizontal 19-inch

power strip with 7 BS 1363 connections.

Unit Height

Description U mm Part. no.

"Copper Basic" accessory package 25 1300 VMA0104



"Copper Plus" accessory package 25 1300 VMA0134



"Fibre Basic" accessory package 25 1300 VMA0204



"Fibre Plus" accessory package 25 1300 VMA0234




8

1
Co-Location cabinets
Minkels compartmented co-location cabinets are an ideal means of

housing several end-clients in the same cabinet, while ensuring they are

safely segregated. You have the choice of 2 or 4-compartment cabinets.

Minkels co-location cabinets also comprise two compartments (2x 2U)

for the datacenter owner, in which monitoring solutions and

powerstrips, etc., can be installed.

Each compartment in the 4-compartment cabinet is 10 U, while in the 2-

compartment cabinet each is 20 U. The compartments are completely

segregated by means of a fixed platform, while each has its own

shielded data & power cable duct. In the event that the datacenter

owner no longer requires segregated compartments, then the co-

location cabinet can be converted into a cabinet without compartments.

The co-location cabinet can also be converted from a 2-compartment to

a 4-compartment cabinet and vice versa.

Furthermore, the 80% perforated doors ensure that your equipment

receives an ample supply of cooling air.

The cabinet with a width of 600mm has a loadbearing capacity of 1000

kg and that of the 800mm cabinet is 850 kg.

There are three or four slots in the top of the co-location cabinet, in

which you can fit various insert modules.

Side panels are not supplied as standard, as the co-location cabinets are

very often linked together. Side panels can naturally be ordered

separately for a stand-alone cabinet or one to be placed at the end of a

row.

The co-location cabinet is supplied as standard without a swivel handle

grip. Various locking systems are available and can be ordered

separately .

Unit Height Width Depth

U mm mm mm Colour Description Part. no.

46 2200 600 1000 RAL 7047 2 sections (2x20U) MCL20226010
















9

Housings - Server, Patch and Co-location racks (VARICON)Construction

V
ARICON-M Minkels catalogue United Kingdom, English. Subject to change without notice. Contact our Sales Department for additional information.

10

1
Components
Frames

The variable construction (frame-plus concept) guaranties a high

stability and strength. The fully earthed frame makes it possible to build

a cabinet for both the active as passive network solutions. The frame as

standard comes with a base height of 25 mm. The option of a 100 mm

base will raise the cabinet by a further 75 mm higher than stated in the

table.

Width mm Width mm

Frame height Frame heigth Depth 600 800

U mm mm Colour Part. no. Part. no.

12 700 600 RAL 7047 VMF076060 -

12 700 800 RAL 7047 VMF076080 -

16 900 600 RAL 7047 VMF096060 -

16 900 800 RAL 7047 VMF096080 -

21 1100 600 RAL 7047 VMF116060 -

21 1100 800 RAL 7047 VMF116080 -

25 1300 600 RAL 7047 VMF136060 VMF138060

25 1300 800 RAL 7047 VMF136080 VMF138080

25 1300 800 RAL 9011 - VMF138080B

25 1300 900 RAL 7047 VMF136090 VMF138090

25 1300 1000 RAL 7047 VMF1360100 VMF1380100

25 1300 1000 RAL 9011 - VMF1380100B

37 1800 600 RAL 7047 VMF186060 VMF188060

37 1800 800 RAL 7047 VMF186080 VMF188080

41 2000 600 RAL 7047 VMF206060 VMF208060

41 2000 800 RAL 7047 VMF206080 VMF208080

41 2000 800 RAL 9011 - VMF208080B

41 2000 900 RAL 7047 VMF206090 VMF208090

41 2000 1000 RAL 7047 VMF2060100 VMF2080100

41 2000 1000 RAL 9011 VMF2060100B VMF2080100B

41 2000 1200 RAL 7047 VMF2060120 VMF2080120

Frame material: Aluminum

Finishing frame: Powder coated

11


What’s in the box: 1 frame

41 2000 1200 RAL 9011 VMF2060120B VMF2080120B

46 2200 600 RAL 7047 VMF226060 VMF228060

46 2200 800 RAL 7047 VMF226080 VMF228080

46 2200 800 RAL 9011 - VMF228080B

46 2200 900 RAL 7047 VMF226090 VMF228090

46 2200 1000 RAL 7047 VMF2260100 VMF2280100

46 2200 1000 RAL 9011 VMF2260100B VMF2280100B

46 2200 1200 RAL 7047 VMF2260120 VMF2280120

46 2200 1200 RAL 9011 VMF2260120B VMF2280120B

Adjustable base legs

Four adjustable base legs are supplied for leveling the cabinet. The

maximum weight stated in the table is for one set.

What’s in the box: 4 adjustable feet incl. mounting material

Extended base legs

If more space for ventilation or cable entry is required, base legs can be

selected. Base legs are supplied with adjustable feet and can be used

with plinths. Quantity is 4. The cabinet will be 75mm higher than the

standard frame.

What’s in the box: 4 base legs, mounted, incl. mounting material

Width mm Width mm

Frame height Frame heigth Depth 600 800

U mm mm Colour Part. no. Part. no.

Material: Plastic

Height Maximum weight Thread length

mm kg mm Part. no.

25 1000 60 MSM1001

Finishing: Galvanised

Colour: Sendzimir

Material: Sheet metal

Thickness: 2.0 mm

Height Maximum weight

mm kg Part. no.

100 850 MSM2001


12

1

What’s in the box: 4 castors incl. mounting material

Castors

If the cabinet is equipped with castors it is very easy to move the cabinet

from one location to the other. A set of castors is available with or

without brakes. The maximum weight illustrated is per set.

Type Part. no.

4 castors without brakes MSM3001

2 castors with brakes, 2 castors without brakes MSM3002

Plinths 25mm front/rear

Plinths are available in a perforated or blank version. Ventilated front/

rear plinth with a height of 25 mm create an optimal airflow in the

cabinet. Plinths are secured to the base by means of a ’click’-system and

cover the adjustable feet.

What’s in the box: 1 plinth

Constuction height: 100 mm

Maximum weight: 400 kg

Housing material: Steel

Wheel material: Plastic

Width

mm type Colour Part. no.

600 Blank RAL 7047 MSM1101

600 Blank RAL 9011 MSM1101B

600 Perforated RAL 7047 MSM1102

600 Perforated RAL 9011 MSM1102B





13


Plinths 25mm side

Blank plinths to cover the base legs and to support the side panel. They

are secured to the base with screws.

What’s in the box: 1 plinth incl. fasteners

Plinths 100mm front/rear

Plinths are available in a perforated and blank version. The ventilated

plinth is used to create an optimal airflow in the cabinet. To prevent

dust, an optional filter set can be used. The filter set also fits the 100mm

side plinths. Plinths are secured to the base legs with screws.


Depth

mm Colour Part. no.

600 RAL 7047 MSM1103

800 RAL 7047 MSM1203

800 RAL 9011 MSM1203B

900 RAL 7047 MSM1303

1000 RAL 7047 MSM1403

1000 RAL 9011 MSM1403B

1200 RAL 7047 MSM1503

1200 RAL 9011 MSM1503B

Width






600 Filterset MSM2301





800 Filterset MSM2302


14

1

Side plinths 100mm

Plinths to cover the base legs and to support the side panel. They are

secured to the base with screws.


Plinths front/rear (in combination with castors)

Plinths can be used in combination with castors and are secured to the

base by means of a so-called ’click-system’.

What’s in the box: 1 plinth

Depth

















type: Blank

Width

mm Part. no.

600 MSM3101

800 MSM3201

15


Side plinths (in combination with castors)

Plinths can be used in combination with castors and are secured to the

base by using screws.

What’s in the box: 1 plinth incl. mounting material

Floor fixing set

The floor fixing set will secure the frame to several floor types. If a

computer floor is being used, we recommend a direct attachment to a

lower floor, this is possible by using a length of stud. The stud is not

included in this set.

What’s in the box: 2 Z-profiles with integrated nuts, incl. mounting material

Depth

mm Part. no.

600 MSM3103

800 MSM3203

900 MSM3303

1000 MSM3403

Sockle height

mm Part. no.

25 MSM4100


16

1

What’s in the box: 1 bottom plate incl. mounting material

Base plates

Base plates are available in blank versions or with three cut outs. The cut

outs are modular and will accept cable entry brush, ventilation plate,

blank plate or ventilation unit. With the 800mm width cabinets it is

possible to use a blank plate or cable entry brush at the right and left of

the bottom plate.

Depth

Bottom plate width mm Cut-out # cut-outs Colour Part. no.

600/800 600 Cut-outs 3 RAL 7047 MBM0100

600/800 600 Blank 0 RAL 7047 MBM0110

600/800 800 Cut-outs 3 RAL 7047 MBM0101

600/800 800 Cut-outs 3 RAL 9011 MBM0101B

600/800 800 Blank 0 RAL 7047 MBM0111

600/800 900 Cut-outs 3 RAL 7047 MBM0102

600/800 900 Blank 0 RAL 7047 MBM0112

600/800 1000 Cut-outs 3 RAL 7047 MBM0103

600/800 1000 Cut-outs 3 RAL 9011 MBM0103B

600/800 1000 Blank 0 RAL 7047 MBM0113

600/800 1200 Cut-outs 3 RAL 7047 MBM0104

600/800 1200 Cut-outs 3 RAL 9011 MBM0104B

600/800 1200 Blank 0 RAL 7047 MBM0114

Thickness: 1.5 mm

Cut-out depth: 122 mm

Cut-out width: 405 mm

17


What’s in the box: The blank, brush and cable pull relief are delivered as single pieces. The stiffener profiles are delivered per 2 incl. mounting material

Base plates left / right, (800 mm width)

In the 800mm version there is a base plate and room for options as

shown in the table below.

Depth

type Location mm Colour Part. no.

Blank Left/right 600 RAL 7047 MBM0120


Blank Left/right 800 RAL 9011 MBM0121B






Brush Left/right 600 Black MBM0130





Stiffener profile Left/right 600 RAL 7047 MBM0040





Location: Left/right


18

1

What’s in the box: 1 top incl. mounting material

Top blank

The top features 3 or 4 cut-outs which can be fitted with various inserts

for cable-entry and/or ventilation. Cut outs are spread from front to rear

in the 600mm wide tops, or from left to right in 800mm wide tops.

This type has no ventilation slots. A top with ventilation slots are

available on request.

Width Depth cut out

mm mm pcs Colour Part. no.

600 600 3 RAL 7047 MRF0017

600 800 3 RAL 7047 MRF0018

600 900 3 RAL 7047 MRF0025

600 1000 3 RAL 7047 MRF0027

600 1000 3 RAL 9011 MRF0027B

600 1200 3 RAL 7047 MRF0030

600 1200 3 RAL 9011 MRF0030B

800 600 3 RAL 7047 MRF0119

800 800 3 RAL 7047 MRF0120

800 800 3 RAL 9011 MRF0120B

800 900 4 RAL 7047 MRF0026

800 1000 4 RAL 7047 MRF0028

800 1000 4 RAL 9011 MRF0028B

800 1200 4 RAL 7047 MRF0029

800 1200 4 RAL 9011 MRF0029B

Material: Steel

Finishing: Powder coated

Description: blank

19


What’s in the box: single pieces incl. mounting material (if needed)

What’s in the box: 1 thermostat, cable included, 1 mounting bracket, self-adhesive

Insert modules

Depending on the situation, you can choose optional modules for base

or top cut-outs.

Description Technical data Part. no.

? Flow under normal load conditions 310 m³/h MCS1007

? Flow under normal load conditions 310 m³/h MCS1007B

Cover plate RAL 7047 153 x 427 mm MBM1001

Cover plate RAL 9011 153 x 427 mm MBM1001B

Ventilation plate 58% perforated RAL 7047 Perorated surface 300 cm² MBM1008

Ventilation plate 58% perforated RAL 9011 Perorated surface 300 cm² MBM1008B

Set of cable entry brushes max opening 153 x 427 mm MBM1003

Fan unit including 2 fans and wiring RAL 7047 230VAC - 320m³/h - 48dB - 44Watt MBM1007

Fan unit including 2 fans and wiring RAL 9011 230VAC - 320m³/h - 48dB - 44Watt MBM1007B

Thermostat

The thermostat measures the heat in the cabinet continuously and

switches the fan unit MBM1004(B) on and off to maintain the desired

temperature.

Material Colour Technical data Part. no.

Plastic White 0-60°C, max 6A/250 VAC MCC0300


20

1

What’s in the box: 1 thermostate, cable included

What’s in the box: 1 door, hinges included (up to and including 25 HE are 2 hinges necessary, over 25 HE are 3 hinges necessary) incl. mounting material

Thermostat

The thermostat can be used together with the following fans:

Triple fan unit MCS1007(B)

Double fan unit TRI.VE.00.02

MWE roof panel with built-in double fan unit MWEFP-425-UK, MWEFP-

525-UK and MWEFP-625-UK.

The thermostat ensures that the fan is turned on at the temperature

setting you select.

Material Colour Technical data Part. no.

Plastic Grey 0-60°C, max 6A/250 VAC MWETF02

Solid doors

Solid steel door, hinged right.

A lock for the swivel handle is ordered separately.Hinges are included.

Width mm Width mm

Unit 600 800

U Colour Part. no. Part. no.

12 RAL 7047 MFD0001

16 RAL 7047 MFD0002

21 RAL 7047 MFD0003

25 RAL 7047 MFD0004 MFD0104

37 RAL 7047 MFD0005 MFD0105

41 RAL 7047 MFD0006 MFD0106

41 RAL 9011 MFD0006B MFD0106B

46 RAL 7047 MFD0007 MFD0107

46 RAL 9011 MFD0007B MFD0107B



21



Doors 80% ventilated

The sheet metal door has a perforation surface of 80%. This perforation

rate guarantees an optimal air flow. The 600mm wide door has a

perforation width of ± 450mm. The 800mm wide door has a perforation

width of ± 585mm. Doors are hinged right as standard.

A lock for the swivel handle is ordered separately. Hinges are included.

Width mm Width mm

Unit 600 800


25 RAL 7047 MFD7104

25 RAL 9011 MFD7104B

41 RAL 7047 MFD7006 MFD7106

41 RAL 9011 MFD7006B MFD7106B

46 RAL 7047 MFD7007 MFD7107

46 RAL 9011 MFD7007B MFD7107B




22

1


Glazed doors (grey tinted)

Steel frame with grey tinted safety glass panel. The strip covers the 19-

inch profiles. Doors are hinged right as standard.


Width mm Width mm

Unit 600 800


12 RAL 7047 MFD2001

16 RAL 7047 MFD2002

21 RAL 7047 MFD2003

25 RAL 7047 MFD2004 MFD2104

37 RAL 7047 MFD2005 MFD2105

41 RAL 7047 MFD2006 MFD2106

46 RAL 7047 MFD2007 MFD2107



23



Glazed doors (clear)

Steel frame with clear safety glass panel. Doors are hinged right as

standard.


Width mm Width mm

Unit 600 800


12 RAL 7047 MFD1001

16 RAL 7047 MFD1002

21 RAL 7047 MFD1003

25 RAL 7047 MFD1004 MFD1104

37 RAL 7047 MFD1005 MFD1105

41 RAL 7047 MFD1006 MFD1106

41 RAL 9011 MFD1006B MFD1106B

46 RAL 7047 MFD1007 MFD1107

46 RAL 9011 MFD1007B MFD1107B




24

1

What’s in the box: 1 door, consists of a left and right turning part, 6 hinges, incl. mounting material

Glazed doors ventilated (grey tinted)

Steel frame with perforation and grey tinted safety glass panel. The strip

covers the 19-inch profiles. Doors are hinged right as standard.



Double doors blank

Two-leaf steel plate door, blank type. The double door provides easy

access to the cabinet, with a minimum turning circl e. In that way the

room in the cabinet is maximised.


Width mm Width mm

Unit 600 800


41 RAL 7047 MDD0006 MDD0106

46 RAL 7047 MDD0007 MDD0107



Colour: RAL 7047

Width mm

Unit 800

U Colour Part. no.

25 RAL 7047 MFD4114

41 RAL 7047 MFD4116

46 RAL 7047 MFD4117



Colour: RAL 7047

25



Double doors 80% ventilated

Two-leaf steel plate door, 80% ventilated to create airflow to or from

your equipment. The double door provides easy access to the cabinet,

with a minimum turning circle.


Width mm Width mm

Unit 600 800


41 RAL 7047 MDD7006 MDD7106

41 RAL 9011 MDD7006B MDD7106B

46 RAL 7047 MDD7007 MDD7107

46 RAL 9011 MDD7007B MDD7107B




26

1


Double doors glass (grey tinted)

Two-leaf steel glass door, the glass is grey tinted. The double glass door

provides easy access to the cabinet, with a minimum opening radius, it

enlarges the amount of space and enables optimal use of your computer

room or patch room.


Width mm Width mm

Unit 600 800


41 RAL 7047 MDD1016 MDD1116

46 RAL 7047 MDD1017 MDD1117

Rear panels

Square 6 locks enable the panels to be removed quickly. The rear panel

is manufactured blank to assist venting through the top panel.

What’s in the box: 1 panel, 2 locks square 6mm (12-25HE), 4 locks square 6mm (37-46HE)



Colour: RAL 7047



Colour: RAL 7047

Width mm Width mm

Unit 600 800

U Part. no. Part. no.

12 MRP0001 -

16 MRP0002 -

21 MRP0003 -

25 MRP0004 MRP0104

37 MRP0005 MRP0105

41 MRP0006 MRP0106

46 MRP0007 MRP0107

27


Optional seals

The optional rubber door seals can be used at the left or right side. It

provides an optimal climate in your cabinet, reduces sound and reduces

the amount of dust in the cabinet.

What’s in the box: 1 rubber sealing, self-adhesive

Extension kit

With this extension kit you can increase your cabinet depth by multiples

of 100mm. This kit is easy to mount and the cabinet becomes 100mm

wider. The kit can be mounted to the front or rear. Existing doors can be

fitted to the extension kit itself. In this manner your Varicon-M cabinet is

future proof. 19-inch profiles can be placed in the extension kit. The

standard base will fit into the extension kit.

The extension kit in the colour RAL 9011 is available at request.

What’s in the box: 1 extension kit incl. mounting material and mounting instructions

Material: Rubber

Colour: Black

Unit

U Part. no.

12 MFR0001

16 MFR0002

21 MFR0003

25 MFR0004

37 MFR0005

41 MFR0006

46 MFR0007


Frame height Width

U mm Colour Part. no.

41 600 RAL 7047 VMF206010

41 800 RAL 7047 VMF208010

46 600 RAL 7047 VMF226010

46 800 RAL 7047 VMF228010


28

1

What’s in the box: single pieces incl. mounting material

Locking systems

Locking system for front and rear doors. Different types are available. In

the picture you’ll see from left to right the following locks: cylinder,

swivel handle and swivel handle with combination lock. When ordering

the swivel handle, note that the lock should be ordered separately.

(Except the swivel handle with combination lock).

Unique cylinder locks are available for combination locks. Price and

delivery period are at request.

Door Door

Single door Double door

Lock type # locking points Unit Part. no. Part. no.

Swivel handle Fix Easy 2-points 12 and 16 MLK0501

Swivel handle Fix Easy 2-points 21 and 25 MLK0502

Swivel handle Fix Easy 2-points 37, 41 and 46 MLK0503

Swivel handle Fix Easy 2-points 41 MLK1306

Swivel handle Fix Easy 2-points 46 MLK1307

Cylinder Fix Easy 2-points 12 and 16 MLK0521

Cylinder Fix Easy 2-points 21 and 25 MLK0522

Cylinder Fix Easy 2-points 37, 41 and 46 MLK0523

Swivel handle Fix Easy with combination lock

2-points 12 and 16 MLK0531


2-points 21 and 25 MLK0532


2-points 37, 41 and 46 MLK0533


2-points 41 MLK1326


2-points 46 MLK1327

29


What’s in the box: 1 panel, 2 locks, square 6mm (12-25HE), 4 locks square 6mm (37-46HE)

Cylinders for swivel handles

Cylinder choice for swivel handle grip.

What’s in the box: 1 lock, 2 keys (if needed), incl. mounting material

Side panels

Side panels are manufactured blank. Square 6 locks ensure that the side

panel can be removed quickly. A side plinth is necessary when mounting

a side panel.

Depth mm Depth mm Depth mm Depth mm Depth mm

Unit 600 800 900 1000 1200

U Colour Part. no. Part. no. Part. no. Part. no. Part. no.

12 RAL 7047 MSP0001 MSP0101

16 RAL 7047 MSP0002 MSP0102

21 RAL 7047 MSP0003 MSP0103

25 RAL 7047 MSP0004 MSP0104 MSP0204 MSP0304

25 RAL 9011 MSP0104B MSP0304B

37 RAL 7047 MSP0005 MSP0105

41 RAL 7047 MSP0006 MSP0106 MSP0206 MSP0306 MSP0406

41 RAL 9011 MSP0106B MSP0306B MSP0406B

46 RAL 7047 MSP0007 MSP0107 MSP0207 MSP0307 MSP0407

46 RAL 9011 MSP0107B MSP0307B MSP0407B

Description Part. no.

Blank MLK9001

Cylinder lock - EK-333 MLK9003

Wilka cylinder MLK9004


30

1

Cylinder lock

The cylinder lock replaces the square lock. The cylinder lock gives extra

security to the side panels. When the cabinet is 37 HE or higher, use four

cylinder locks, when the cabinet is lower two.

What’s in the box: 1 cylinder and 2 keys

Internal locking mechanism

Side panels can only be locked and unlocked from the inside with this

internal locking mechanism, it prevents unauthorised access to the

cabinet. When the cabinet is 37 U or higher use two locks, when lower

use one.

What’s in the box: 1 internal locking mechanism incl. mounting material


simple cylinder lock MSP0199

Depth

mm Location Part. no.

600 Left MSA0001

600 Right MSA0002

800 Left MSA0101

800 Right MSA0102

900 Left MSA0201

900 Right MSA0202

1000 Left MSA0301

1000 Right MSA0302

31


19-inch profiles

The 19-inch profiles are supplied with a hole configuration at the front

and side to enable mounting equipment and accessoiries. The

aluminium extrusion garuantees a high strength. Another advantage for

mounting from the inside of the cabinet is quick change and easy

adjustment.

What’s in the box: 2 19-inch profiles and 4 brackets incl. mounting material

Metric profiles

For mounting metric equipment and/or accessoiries you can choose

metric profiles which have to be mounted on mounting depth posts (at

least 4). Metric profiles are provided with punched holes.

What’s in the box: 2 profiles incl. mounting material

Material: Aluminum

Finishing: Chromatized

Unit

U Description Part. no.

12 Flat profiles MPR0601







Material: Steel


Unit (Metric)

ME Part. no.

21 MPR1001

29 MPR1002

37 MPR1003

45 MPR1004

65 MPR1005

73 MPR1006

81 MPR1007


32

1

Number strips

The number strip is used to indicate the heights.

What’s in the box: 1 number strip

Support spacer 100mm

Spacer for mounting metric profiles in a 800mm wide cabinet. The

number of support spacers depends on the number of mounting depth

posts.

What’s in the box: 1 support spacer incl.mounting material

Depth posts t/b 800mm (w)

Set of 2 or 4 depth posts to help assembly and adjustment of the 19-inch

profiles. The depth posts are mounted on the top and bottom window.

Depth posts are suitable for large servers.

Depth

Location mm Description Part. no.

Depth 600 4 Depth posts MPR0160


Description

Part. no.

Number strip for 19-inch profile 46U

MPR0060

Number strip for metric profile 81ME

MPR0061



Width

mm Part. no.

100 MPR0050

Location: Depth



33


What’s in the box: 2 or 4 depth posts incl. mounting material

What’s in the box: 2 profiles incl. 2 top mounting brackets and mounting material









Top mounting brackets incl. 19-inch profiles

A set of 2 19-inch profiles and 2 top mounting brackets. The top

mounting brackets guarantee optimal cable entry from the top. The set

is suitable for cabinets 800mm wide. When ordering this set, you should

also order a set of two deep posts for the lower frame.

Material 19-inch profiles: Aluminium

Finishing 19-inch profiles: Chrome plated

Material top mounting brackets: Steel

Finishing top mounting brackets: Blue passivated

Height

mm Description Part. no.

- Set with 4 top mounting brackets MPR0900





Depth



34

1

Depth posts for divided 19-inch - 800 (w)

Set of 4 depth posts to support the 19-inch profiles in 800mm wide

cabinets. Because of their design and bearing ability (450 kilo) they are

suitable to support the 19-inch profiles.

What’s in the box: 4 depth posts side-mounted, 4 support spacers left, 4 support spacers right, incl. mounting material

Depth posts for divided 19-inch - 600 (w)

Set of 4 depth posts to help the 19-inch profiles to split a 600mm

cabinet. Maximum load bearing with this solution is 450 kg.

What’s in the box: 4 depth posts incl. mounting material




Depth


Left/right 600 4 depth posts MPR1170








Depth






35


Stability posts 19-inch

The stability posts are secured to the 19-inch profiles, they provide

added strength and support when heavy equipment is to be used. As a

rule the stability posts are mounted in the middle of the cabinet (in

height direction).

What’s in the box: 2 x stability posts, 4 brackets, incl. mounting material. The 800mm stability posts are delivered with 4 support spacers

Adjustable pull relief

Variable strip to mount between the first and last 19-inch profiles. The

strip stabilises and prevents the 19-inch profiles opening out.

What’s in the box: Set of 2, incl. mounting material to mount between the two 19-inch profiles



Width mm Width mm

Depth 600 800

mm Part. no. Part. no.

600 MPR0180 MPR1180

800 MPR0181 MPR1181

900 MPR0182 MPR1182

1000 MPR0183 MPR1183

1200 MPR0184 MPR1184



Construction depth Part. no.

650 - 800 MPR0251


36

1

Mounting depth posts

Mounting depth posts can be used to mount metric profiles and/or

accessories. For metric profiles, at least 4 posts and 4 support spacers

(MPR0050) are necessary.

What’s in the box: 1 mounting depth post incl. mounting material

Mounting width posts

By mounting a width post between the mounting depth posts, a

horizontal connection can be created for example for cable guidance.

What’s in the box: 1 mounting width post incl. mounting material



Depth

mm Part. no.

600 MPR0150

800 MPR0151

900 MPR0152

1000 MPR0153

1200 MPR0154



Width

mm Part. no.

600 MPR0100

800 MPR0101

37


Cable management

Cable ducts

The cable ducts are available in two versions: A narrow cable duct on the

rear of the cabinet and a broad one across the middle of the cabinet.

The narrow cable duct is fitted to the cabinet’s rear cable entry, which

can be used to feed through limited numbers of cables, with which to

connect the servers for instance.

The broad cable duct is fitted to the cabinet’s middle cable entry, which

means that it can be used to feed through large numbers of cables to

the left and/or right of the cabinet, as required in patch cabinets. The

broad cable duct is also equipped with a partition, which enables the

segregation of fibre optic and copper cables from one another. The

position of the partition is adjustable.

In the case of particularly large cabinets, the two systems - one narrow

and one broad duct - can be combined to effectively create a three

compartment unit. This enables the adequate segregation of fibre optic,

copper and power cables from one another.

The cable ducts are fitted with waterfalls to create the appropriate bend

radius for the cables. This facilitates the process of feeding the cables in

smoothly, while also holding them close to the sides of the cabinet, so

that the equipment remains easily accessible.

The cable ducts are available in the colours RAL 7047 and RAL 9011.

Capacity

mm Width (cabinet) Colour Position on the top Description Part. no.

200 600mm RAL 7047 Rear Narrow cable duct with dual cable entry

MCM0300


MCM0300B


MCM0301


MCM0301B

200 600mm RAL 7047 - Partition cable duct small MCM0410

200 600mm RAL 9011 - Partition cable duct small MCM0410B

200 800mm RAL 7047 - Partition cable duct small MCM0412

200 800mm RAL 9011 - Partition cable duct small MCM0412B

600 600mm RAL 7047 Middle Broad cable duct with adjustable partition and dual cable entry

MCM0302

Material: Steel


Height: 120 mm

Depth narrow cable tray: 200 mm

Depth broad cable tray: 600 mm


38

1

What’s in the box: 1 narrow cable duct incl. mounting material or 1 broad cable duct incl. mounting material and partition

What’s in the box: incl. mounting material


MCM0302B


MCM0303


MCM0303B

Lids and end plates for cable ducts

The cable ducts can also be fitted with lids. These are attached directly

to the cable ducts. The lids provide added protection, while also

preventing the intrusion of dust.

The ends of a row of cable ducts can be sealed off by fitting end plates.

The lids and end plates are already cut to size, and are available in the

colours RAL 7047 and RAL 9011.

Capacity

mm Width (cabinet) Colour Position on the top Part. no.

200 600mm RAL 7047 Rear MCM0310

200 600mm RAL 9011 Rear MCM0310B

200 800mm RAL 7047 Rear MCM0311

200 800mm RAL 9011 Rear MCM0311B

200 600 en 800mm RAL 7047 Rear MCM0320

200 600 en 800mm RAL 9011 Rear MCM0320B

600 600mm RAL 7047 Middle MCM0312

600 600mm RAL 9011 Middle MCM0312B

600 800mm RAL 7047 Middle MCM0313

600 800mm RAL 9011 Middle MCM0313B

600 600 en 800mm RAL 7047 Middle MCM0321

600 600 en 800mm RAL 9011 Middle MCM0321B

Capacity

mm Width (cabinet) Colour Position on the top Description Part. no.

Material: Steel




39


What’s in the box: 1 narrow cable duct incl. mounting material or 1 broad cable duct incl. mounting material and partition


Cable duct for VariCondition-H2O and VariCondition-DX

If Varicondition-H2O and Varicondition-DX are integrated between a

row of cabinets (in-row cooling), then the cable ducts can be laid over

the tops of the cooling units. The cable ducts are available in two

versions: a narrow cable duct and a broad one. The cable ducts are

available in RAL colours 7047 and 9011.

Width

mm Colour Description Part. no.

200 RAL 7047 Narrow cable duct (200 mm) for VariCondition-H2O and VariCondition-DX MCM0316

200 RAL 9011 Narrow cable duct (200 mm) for VariCondition-H2O and VariCondition-DX MCM0316B

600 RAL 7047 Broad cable duct for VariCondition-H2O and VariCondition-DX with adjustable partition and dual cable entry

MCM0317

600 RAL 9011 Broad cable duct for VariCondition-H2O and VariCondition-DX with adjustable partition and dual cable entry

MCM0317B

Lids for cable ducts for VariCondition-H2O and -DX

Lids are available for the cable ducts for Varicondition-H2O and

Varicondition-DX. The lids are directly attached to the cable ducts,

providing added protection and shielding the cables from dust.

Width

mm Colour Part. no.

200 RAL 7047 MCM0318

200 RAL 9011 MCM0318B

600 RAL 7047 MCM0319

600 RAL 9011 MCM0319B

Material: Steel


Height: 120 mm



Material: Steel





40

1

What’s in the box: cover with mounting materials

Cable bridges

Cable bridges can be use for traversing hot or cold aisles. The cable

bridge is compatible with both narrow and broad cable ducts, and can

also be used in combination with a Cold Corridor. Cable bridges are

available in three sizes for traversing aisles measuring between 990 mm

and 1750 mm, between 1235 mm and 2000 mm and between 2000 mm

and 3700 mm (from cable duct to cable duct). The cable bridges are

fitted with a telescopic system so that they can be adjusted to bridge the

distance between one cable duct and another without needing to be

sawn to size. The cable bridges can be installed at various distances

along the aisle. Cable bridges can be used for reducing the number of

branches from the main source, or for achieving interconnectivity within

the Cold Corridor, for instance. Several bridges may used, depending on

the required capacity, or to segregate different cables. The cable bridges

are available in the RAL colours 7047 and 9011.

Colour Part. no.

RAL 7047 990 mm to 1750 mm MCM0306

RAL 7047 1235 mm to 2000 mm MCM0307

RAL 7047 2000 mm to 3700 mm MCM0308

RAL 9011 990 mm to 1750 mm MCM0306B

RAL 9011 1235 mm to 2000 mm MCM0307B

RAL 9011 2000 mm to 3700 mm MCM0308B

Material: Steel


Height: 120 mm

Capacity: 150 mm

41



What’s in the box: Mounting bracket, cable guides including fixing materials

Lids for cable bridges

The cable bridges can be fitted with covers. The covers are directly

attached to the cable bridges, providing added protection and shielding

the cables from dust. The covers can overlap each other. This allows

several covers to be used, ensuring that the cable bridge is adequately

protected. The covers are available in the RAL colours 7047 and 9011.

length

Colour mm Part. no.

RAL 7047 1030 MCM0323

RAL 7047 1700 MCM0322

RAL 9011 1030 MCM0323B

RAL 9011 1700 MCM0322B

Mounting bracket including cable guides

These cable guides are ideal for swift and efficient cabling. A cable

guide is 87mm long, and can be detached without the use of tools.

Cabling per 1U is also available. The bend radius is highly suitable for

fiber optics. There is space for 24 cables per 1 U.Flame class: UL94-V0Halogen-free

Description Material Colour Part. no.

6U mounting bracket for 19-inch profile incl. 6 cable guides Polyamide RAL 5015 MCM2001








20 Cable guides (ordered separately) Polyamide RAL 5015 MCM2009

Material: Steel


Capacity: 150 mm


42

1

What’s in the box: 2U mounting plate including cleats and fixing materials

What’s in the box: 4 x 1U mounting brackets and 4 x cable cleats with mounting materials

Cable cleats

The cable cleats ensure optimum cabling efficiency. Cable cleats are 75

mm long. The cable cleats can be clicked onto each other (length of 2

units: 150 mm / length of 3 units: 225 mm). The maximum bearing

capacity of three cable cleats mounted on top of each other is 15 kg if

the weight is distributed evenly. The 60 mm radius is particularly suitable

for glass fibre cables.

Flame class: UL94-V0

Description Material Colour Part. no.

2 cleats including 2U mounting plate RAL 7047 Polyamide RAL 5015 MCM2010

2 cleats including 2U mounting plate RAL 9011 Polyamide RAL 5015 MCM2010B

1 cleat (can be ordered separately) Polyamide RAL 5015 MCM2011

Mounting bracket (4x) for the cable cleat + 4x cable cleat

The cable cleats are used to make cabling as efficient as possible.

Positioning the cable cleats alongside the 19-inch profile allows the

cables to be guided in an optimum fashion. The mounting brackets can

be attached to the 19-inch profile at any height.


Mounting bracket (4x) for the cable cleat + 4x cable cleat MCM2020

Material: Steel


Unit: 1 U

43


Shunting eye

The shunting eye for front mounting vertical 35 x 64 mm (w x d) is used

for cable management and can be mounted on 19-inch profiles.


Shunting eye

The shunting eye for front mounting 1HE 30 x 86 mm (w x d) is used for

cable management and can be mounted on 19-inch profiles.


Shunting eye

The shunting eye for front mounting 1,5HE 52 x 86 mm (w x d) is used



Width: 35 mm

Depth: 64 mm


vertical - 1 piece MCM0001

vertical - 100 pieces MCM1001

Width: 30 mm

Depth: 86 mm


1 U - 1 piece MCM0002

1 U - 100 pieces MCM1002

Width: 52 mm

Depth: 86 mm


1.5 U - 1 piece MCM0003

1.5 U - 100 pieces MCM1003


44

1

Shunting eye

The shunting eye is used for cable management. The shunting eye can

be mounted on the 19-inch profiles as well as on the height posts of the

frame.


Shunting eye, side mounted

The shunting eye for side mounting 19-inch - 110 x 154mm (w x d) is

used for cable management and can be mounted on 19-inch profiles.




be mounted on the height posts of the frame.


Width: 84 mm

Depth: 86 mm




Width: 110 mm

Depth: 154 mm


mounting on 19-inch - 1 piece MCM0007

mounting on 19-inch - 100 pieces MCM1007

Width: 85 mm

Depth: 165 mm


mounting on frame post - 1 piece MCM0008

mounting on frame post - 100 pieces MCM1008

45




be mounted on the height posts of the frame.


Cable guidance fiber optics

Cable guidance with a controlled bend radius and a cable pull relief

which meets the requirements of fiber optics. The cable guidance is RAL

7047 coloured.

What’s in the box: 1 cable guidance fiber optics incl. mounting material

Width: 130 mm

Depth: 120 mm


mounting on frame post - 1 piece MCM0009

mounting on frame post - 100 pieces MCM1009

Width

Description mm Part. no.

Left 86 MCM0023

Right 86 MCM0024


46

1

Cable trays, sinked

The cable tray creates various possibilities for vertical cable management

in the cabinet. Cables can be attached to the cable tray over the full

height of the cabinet. Cable tray is mounted on the top and bottom

frame.

What’s in the box: 1 cable tray incl. mounting material

Cable trunks

The cable trunk is made from grey PVC and can be mounted to the

depth posts. Trunk contains lid and break-out options on the side for

flexible cable management.

What’s in the box: 1 cable trunk incl. mounting material



Unit Width

U mm Part. no.

25 200 MCM0124

25 300 MCM0134

41 200 MCM0126

41 300 MCM0136

46 200 MCM0127

46 300 MCM0137

Material: PVC

Colour: Grey

Height Width Depth

mm mm mm Part. no.

2000 44 45 MCM0050

2000 86 65 MCM0051

2000 107 65 MCM0052

2000 200 65 MCM0053

47


What’s in the box: MCM0100: bundle of 100 pieces, FDH0420: 25 metres velcro, double-sided roll

Shunting comb with 4 teeth

The shunting comb allows easy routing of cables.

What’s in the box: 1 shunting comb incl. mounting material

Velcro tapes

Velcro tapes to bundle cables and for fitting cables on various cable

trays quickly and securely.


Velcro tape 100 pieces MCM0100

25 metres velcro, double-sided roll FDH0420

Cable ties

Cable ties to bundle cables and for fitting cables on various cable trays

quickly and securely. Quantity 100.

What’s in the box: 100 pieces



Description Colour Part. no.

with 4 rings, 2 x 1/2 HE x 70 mm RAL 7047 MCM0011

with 4 rings, 2 x 1/2 HE x 70 mm RAL 9011 MCM0011B

Width length

mm mm Part. no.

3 100 MCM0101

5 360 MCM0102


48

1
Cable overlength cassette
Cable overlength cassette for easy and effective cable management.

What’s in the box: 1 cable overlength cassette incl. mounting material


Colour: RAL 9011

Unit: 2 U

Unit

Material Colour U Part. no.

Sheet metal RAL 9011 2 MCM1111

49


Air flow optimalisation rack

What’s in the box: 1 front panel incl. plastic fasteners

Minkels Fix Easy front panel

When developing the front panel, emphasis was put on quick and easy

installation, which now takes no time at all. Special plastic fasteners

ensure the front panel is fixed between the 19-inch profiles, no tools

required!

The front panels are available in RAL 7047 and RAL 9011.

Unit

U Description Colour Part. no.

1 1 Front panel RAL 7047 MFE0101

1 1 Front panel RAL 9011 MFE0101B









Material: Steel

Thickness: 1.0 mm

19-inch: Yes



50

1

What’s in the box: 4 or 6 front panels incl. plastic fasteners

Minkels Fix Easy front panels (set of 4 or 6)




required!


The set contains 4 or 6 front panels including plastic fasteners.

Unit

U Description Colour Part. no.

1 Set of 6 front panels RAL 7047 MFE0111

1 Set of 6 front panels RAL 9011 MFE0111B







Material: Steel

Thickness: 1.0 mm

19-inch: Yes


51


What’s in the box: The mix contains different front panels incl. plastic fasteners

Minkels Fix Easy front panels (mix)




required!


The mix contains:

24 panels 1U = 24U

24 panels 2U = 48U

24 panels 3U = 72U

16 panels 6U = 96U

In total 240 U


Mix of frontpanels (240 U in total) RAL 7047 MFE1120

Mix of frontpanels (240 U in total) RAL 9011 MFE1120B

Plastic front panel

The plastic front panel serves to seal off the 19-inch area so that it is

airtight. The front panel have been specially designed to make

installation easy and to form an airtight 19-inch seal. The front panel is

easy to mount between the 19-inch profiles. No materials are needed

for securing the front panel. Air tight accessories enable energy savings

by preventing air leakage.

What’s in the box: 25 1U plastic front panels incl. mounting material

The plastic front panel is available from 1 September 2012

Material: Steel

19-inch: Yes


Material: ABS (UL94-V0)

Colour: RAL 9005


Plastic front panel MFE1105


52

1

What’s in the box: One set contains 2 side skirts and 1 top skirt incl. mounting material

Side skirts

The side skirts are mounted in 800mm wide cabinets next to the 19-inch

profiles. They prevent the cold air from leaking along the 19-inch

profiles. Each side skirt contains 3 x 2 HE 19-inch cut outs. The cover

plates are not included and have to be ordered separately, for example

the Minkels Fix Easy front panel MFE0102. Rubber cable grommets are

placed at the top and bottom of each side skirt.

Unit

U Colour Description Part. no.

41 RAL 7047 Suitable for 800mm wide cabinets MCS0006

41 RAL 9011 Suitable for 800mm wide cabinets MCS0006B

46 RAL 7047 Suitable for 800mm wide cabinets MCS0007

46 RAL 9011 Suitable for 800mm wide cabinets MCS0007B

Side skirt side panels

The side skirt side panels are used in combination with the side skirts

and prevent cold air from leaking to the side of the cabinet. The panels

are mounted perpendicular to the side skirts.

What’s in the box: One set contains 2 side skirt side panels incl. mounting material

Description: Suitable for 800mm wide cabinets

Depth: 300 mm

Unit Depth

U mm Colour Part. no.

41 300 RAL 7047 MCS0016

41 300 RAL 9011 MCS0016B

46 300 RAL 7047 MCS0017

46 300 RAL 9011 MCS0017B

53


What’s in the box: 1 heat baffle incl. mounting material

Side skirt seal kit

The side skirt seal kit is used to seal the gap between the side skirts in

case of bayed cabinets. This will prevent cold air from leaking to the

back side of the cabinet.

The side skirt seal kit is available in 46 U. In case you would like to use

the kit in smaller cabinets, please note that it is possible to cut the kit to

the right size.

The side skirt seal kit exists of fire retardant foam (UL94).

What’s in the box: 1 vertical seal strip, 1 horizontal seal strip

Heat baffle

The heat baffle is used to guide the incoming cold air, which enters from

the raised floor, to the front of the cabinet. Therefore, all cold air will be

used to cool the equipment and can not leak away. The heat baffle is

adjustable in height between 3 and 6 U.

Technical data Description Colour Part. no.

Scalable between 1 - 16 kW Adjustable between 3 - 6 U RAL 7047 MCS2001

Scalable between 1 - 16 kW Adjustable between 3 - 6 U RAL 9011 MCS2001B

Unit

U Material Colour Part. no.

46 Rubber Grey MCS0011


54

1

What’s in the box: 1 air intake valve, 1 set base plates with 4 cable entry brushes incl.mounting material

Air intake valves

The mechanical adjustable air intake valves are used to let the air flow

into the cabinet from the raised floor. The flow surface is dimensioned

specifically to ensure that the air velocity remains low, even for high air

volumes. Therefore, all the air will be used to cool the equipment. The

bottom plate is included in this set.

Width Depth

Description mm mm Colour Part. no.

Incl. base plate 1000mm 450 450 RAL 7047 MCS3003

Incl. base plate 1000mm 450 450 RAL 9011 MCS3003B

Incl. base plate 1200mm 450 450 RAL 7047 MCS3004

Incl. base plate 1200mm 450 450 RAL 9011 MCS3004B

Cable entry plates mounted in the side skirts

These cable entry plates are mounted 19-inch in the side skirts and are

used for air tight cable entry. The accessories that incorporate foam are

extra air tight.

Air tight accessories enable energy savings by preventing air leakage.


Unit


2 RAL 7047 Cable entry plate MCS5002

2 RAL 7047 Cable entry foam MCS5004

2 RAL 7047 1U Cable entry foam1U Front panel

MCS5005

2 RAL 9011 Cable entry plate MCS5002B

2 RAL 9011 Cable entry foam MCS5004B

2 RAL 9011 1U Cable entry foam1U Front panel

MCS5005B

55


Cable entry plates between the 19-inch profiles

These cable entry plates are suitable for feeding through cables. The

cable entry plates are mounted between the 19-inch profiles. The

accessories that incorporate foam are extra air tight.

Air tight accessories enable energy savings by preventing air leakage.


Unit


1 RAL 7047 Cable entry foam MCS5006

1 RAL 9011 Cable entry foam MCS5006B

2 RAL 7047 Cable entry plate MCS5002

2 RAL 9011 Cable entry plate MCS5002B


56

1
Accessories
How to choose the right shelf for a rack?

Does the rack have No Only full-size shelves can be used.

FULL-SIZE SHELVES

For example:

FOUR-POINT SHELVES

For example:

Yes

Will the shelf be

supported by four

No

Yes

57


What’s in the box: 1 shelf, 2 guiding rails, 4 fixation clips

What’s in the box: 1 shelf, 2 mounting rails, incl. mounting material

Minkels Fix Easy shelves

This shelf has a variable depth, so installation no longer depends on the

distance between the 19"-profiles. When developing the shelf, emphasis

was put on quick and easy installation, which now takes no time at all.

Special plastic clips ensure the shelf is fixed on the 19"-profiles, no tools

required!

An extra set of 4 fixation clips is available, part. no is MFE0020.

Weight capacity is based on a maximum rail extension of 150 mm.

Shelves with a depth of 650 mm or more will also be available in black

RAL 9011.

Depth Maximum weight

mm Construction depth kg Useable space Colour Part. no.

White MFE0020

250 250 - 400 50 447 x 250 RAL 7047 MFE0001

350 350 - 500 50 447 x 350 RAL 7047 MFE0002

500 500 - 650 50 447 x 500 RAL 7047 MFE0003

500 500 - 650 50 447 x 500 RAL 9011 MFE0003B

650 650 - 800 40 447 x 650 RAL 7047 MFE0004

650 650 - 800 40 447 x 650 RAL 9011 MFE0004B

Variable shelves

Variable shelf, which means the depth of the shelf does not have to be

equal to the distance between the 19-inch profiles. The shelf is attached

to the 19-inch profiles. The maximum weight is valid in case of equal

weight distribution.

Depth Maximum weight

mm Construction depth kg Useable space Part. no.

250 250 - 400 50 447 x 250 MPL0010

350 250 - 500 50 447 X 350 MPL0011

500 400 - 650 50 447 X 500 MPL0012

700 600 - 850 40 447 x 700 MPL0013

Construction space: 12 mm

Material: Steel


Colour: RAL 7047


58

1

What’s in the box: 1 shelf, 2 mounting rails, incl. mounting material

What’s in the box: 1 telescopic shelf incl. mounting rails and mounting material

Variable shelves 19-inch 100Kg

Maximum perforated variable shelf, with a maximum weight of 100 kilo.

Variable means the depth of the shelf does not have to be equal to the

distance between the first and last 19-inch profiles. The shelf is attached

to the 19-inch profiles. The maximum weight is valid in case of equal

weight distribution.

Depth

mm Construction depth Useable space Colour Part. no.

700 600 - 850 447 x 700 RAL 7047 MPL0014

700 600 - 850 447 x 700 RAL 9011 MPL0014B

800 700 - 950 447 x 800 RAL 7047 MPL0015

800 700 - 950 447 x 800 RAL 9011 MPL0015B

Variable telescopic shelves

A perforated shelf mounted on telescopic rails slides out smoothly,

which makes it easy to use. The shelf is attached to the 19-inch profiles.

The maximum weight is valid in case of equal weight distribution.

Depth Maximum weight Retractable lenght

mm Construction depth kg Useable space mm Part. no.

350 350 - 550 75 415 x 350 350 MPL0111

500 400 - 700 75 415 x 500 500 MPL0112

700 600 - 900 50 415 x 700 700 MPL0113



Material: Steel



Material: Steel


Colour: RAL 7047

59


What’s in the box: 1 cantilever shelf incl. mounting material

What’s in the box: 1 keyboard shelf 19-inch incl. telescopic rail and mounting material

Cantilever shelves

Semi floating perforated shelf of 2 U that can be mounted on the 19

inch profiles. The maximum weight is valid in case of equal weight

distribution.

Depth Unit

mm U Description Colour Part. no.

250 2 Half floating 2 U RAL 7047 MPL0311

350 2 Half floating 2 U RAL 9011 MPL0312B

350 2 Half floating 2 U RAL 7047 MPL0312

Keyboard shelves 19-inch

Telescopic keyboard shelf is fitted between the 19-inch profiles and can

be moved into any required position. Any commercial keyboard can be

placed on the keyboard shelf. The maximum weight is valid in case of

equal weight distribution.

Depth Retractable lenght

mm Construction depth mm Colour Part. no.

500 400 - 700 400 RAL 7047 MPK0001

700 600 - 900 750 RAL 7047 MPK0002

700 600 - 900 750 RAL 9011 MPK0002B


Material: Steel




Material: Steel


Useable space: 415 x 500


60

1

What’s in the box: 1 shelf, 4 mounting brackets, incl. mounting material

Full size shelves

Perforated full size shelf which optimally uses the width and depth of

the cabinet. Attached to the height posts or mounting posts. The

maximum weight is valid in case of equal weight distribution.

Width Depth

mm mm Useable space Part. no.

600 600 530 x 500 MPL0411

600 800 530 x 700 MPL0412

800 600 730 x 500 MPL0511

800 800 730 x 700 MPL0512

Cable guide for telescopic shelf

Plastic cable guiding of synthetic material for telescopic shelves to avoid

damage to the cables during the movement of the shelf.

What’s in the box: 1 cable guide for telescopic shelf, 1 height post bracket, 1 depth post bracket, 1 corner bracket


Description: fixed mounted

Material: Steel


Colour: RAL 7047

Retractable lenght

mm Part. no.

700 MPA0003

61


What’s in the box: When you order 100 cage nuts you also receive a cage nut mounting tool

Stiffener rib for full size shelves

Reinforces the full size shelf and prevents bending of the full size

shelves. The stiffener rib can be added at a later stage if desired.

What’s in the box: 1 stiffener rib incl. mounting material

Cage nuts

Caged nuts for mounting applications. They can be mounted in the

holes in the front and back of the 19 inch profiles.

Diameter Description Part. no.

M5 Cage nuts M5 - (20 pieces) MFM0001




Description: shelf depth

Depth

mm Part. no.

500 MPA0010

700 MPA0011

Material: Steel



62

1

Decorative screws with washer

The decorative screws with cross head and black plastic ring can be used

with cage nuts for mounting at the front and side of the 19-inch

profiles.

Diameter Description Part. no.

M5 X 16 Decorative screws with washer (black) M5 - (20 pieces) MFM0010




Third hand

The "third hand" is a nifty tool to support heavy or large equipment

during assembly. The "third hand" is temporarily mounted on the 19-

inch profiles. By using this tool, the equipment is properly supported.

What’s in the box: 1 set contains 2 clamps


Mounting tool MFE0050

63


Baying kit

The baying kit is used to connect two cabinets. Different combinations

of internal baying bushes and external baying plates are available. The

external baying plate can be mounted outside at the height profiles and

is invisible when the door is closed. At least 2 connection points should

be used in front and back. From 41 HE we advise 3 sets at the front and

3 sets at the back.

What’s in the box: The sets MFM0050 and MFM0054 contain 1 baying bush and 1 baying plate incl. mounting materials. The set MFM0051 and MFM0052 contain 1 baying plate incl. mounting materials. The set MFM0053 contains 1 internal baying bush incl. mounting material

Mounting brackets universal (set of 4)

The universal mounting-brackets can, among other things, be used to

mount accessories.

What’s in the box: 4 brackets incl. mounting material

Potential equalising rail

The potential equalising rail is 200mm long, has 1 wire terminal of 25-

29mm² and 10 wire terminals of 2,5-25mm² of galvanised sinked steel.

The potential equalising rail can be mounted on the depth posts as well

as the below window.

What’s in the box: 1 rail incl. mounting materials

Diameter: M4


Set for internal and external baying RAL 7047 MFM0050

Set for internal and external baying RAL 9011 MFM0054

Baying set external RAL 7047 MFM0051

Baying kit external RAL 9011 MFM0052

Baying kit internal Blue MFM0053

Finishing Part. no.

Galvanised MCE0410

length

mm Part. no.

200 MER0003


64

1

Earth rails copper

The grounding strip (20x5mm) is made from copper and can be fitted to

the mounting depth posts, 19-inch profiles and frames vertically.

What’s in the box: 1 rail, 1 wrist band earth point, 1 earthing cable, incl. mounting material and mounting manual

Earthing cables (set)

Set of grounding cables, constisting of 6 grounding cables: 3 x 200mm

and 3 x 400mm, supplied with a M-5 lug on both ends for mounting to

pre-determined grounding points in the cabinet.

What’s in the box: 3 earthing cables 200mm, 3 earthing cables 400mm, incl. mounting material

Document holder

The document holder allows documents to be stored in a variety of

places in the cabinet. The document holder can easily be mounted by

using double sided tape.

What’s in the box: 1 document holder, self-adhesive

Material: Copper

Finishing: None

Part. no.

41 MER0106

46 MER0107

Material Colour Part. no.

Copper Yellow/green MER0001

Material: Polystyrol

Colour: Grey

Part. no.

MDH0001

65


What’s in the box: 1 TFT monitor drawer system incl. mounting material

Lighting set

The lighting set can be mounted 19-inch as well as on the bottom or top

of the frame, without loss of rack space.

What’s in the box: 1 lighting set with cable, 1 mounting bracket, incl. mounting material

Door switch for lighting set

Door switch for lighting set. Switch can be mounted on the bottom or

top frame as well as the height post.

What’s in the box: 1 door switch with cable, 1 mounting bracket, incl. mounting material

TFT monitor drawer system 19-inch

Integrated monitor-keyboard-mouse drawer system for easy and fast

installation in server racks. High quality hinges ensure secure positioning

of the monitor. Smooth-gliding ball bearing telescoping slides with

cable arm. Monitor: 17-inch TFT LCD brilliant display, resolution 1280 x

1024 SXGA, 16.7 mio. colours, on screen menu, PS2 interface for

keyboard and touchpad, CE and FCC certified. USB interface in

frontpanel. Integrated power supply. The colour of the drawer is RAL

9005. The front panels are RAL 9007.

Unit

U Description Keyboard Part. no.

1 incl. front USB port US layout qwerty MTD0001


19-inch - 600 x 30mm - 14 Watt - 230VAC CE - ENEC - TÜV MLS0002

Part. no.

MLS0005

Unit: 1 U


66

1

What’s in the box: 8U mounting plate with mounting materials

Mounting air closure plate

The mounting air closure plate makes it possible for a TFT screen (max.

17 inch) to be mounted in a 19-inch area of a cabinet. Suspension is

made possible using a square slot measuring 4 x 75 mm and 4 x 100 mm.

The mounting air closure plate provides airtight partitioning. The

screen’s cables are fed towards the back of the plate. Air tight

accessories enable energy savings by preventing air leakage.

Unit


8 19-inch mounting air closure plate for max. 17-inch’ TFT monitor MPM0001

Corner guide rails

Variable corner guide rails with variable fixing that uses only 1U

mounting space. Variable fixing means the depth of the corner guide

rail does not have to be equal to the depth between the 19-inch

profiles. The edge is 40mm which supports network equipment.

What’s in the box: 1 corner guide rail left and 1 corner guide rail right incl. mounting material

Material: Steel


Unit: 8 U

Colour: RAL 9011




Construction depth Part. no.

300 - 450 MPR0311

450 - 750 MPR0312

740 - 1050 MPR0313

67


Wall mounting

A set of brackets to attach your Varicon-M cabinet to the wall, the

brackets support the top and bottom of the frame. Suitable for cabinets

higher than 21 U or 37 ME. Template included.

What’s in the box: 2 brackets incl. mounting material for the cabinet

Width

mm Part. no.

MRW0001



ou

sin

gs

- LA

NR

ack

(VA

RIC

ON

)

Pre

-ass

em

ble

d

Co

mp

on

en

ts

Ca

ble

ma

na

ge

me

nt

Air

flo

w o

pti

ma

lisa

tio

n

Acc

ess

ori

es

Housings - LANRack (VARICON)

70

2
Pre-assembled
Rack - stand alone

The stand alone rack is 800 mm wide, 800 mm deep and 42 HE high. The

rack exists of a steel basic frame with leveling feet. Demountable side

panels are included. The base & roof have two cut-outs. The rack is

provided with four universal 19-inch profiles. The front door contains

clear glass, hinges right and is provided with a swivel handle Fix Easy

with blind stop. The back door is blind.

Width Depth Unit

mm mm U Description Part. no.

800 800 2000 Stand-alone MLR2111

Baying rack

The baying rack is 800 mm wide, 800 mm deep and 42 HE high. The rack

exists of a steel basic frame with leveling feet. Side panels and baying

kits are not included but can be ordered separately (side panel

MLR3411, baying kit MLR4201). The rack is provided with four universal

19-inch profiles. The base & roof have two cut-outs. The front door

contains clear glass, hinges right and is provided with a swivel handle Fix

Easy with blind stop. The back door is blind.

Width Depth Unit


800 800 2000 Baying rack MLR1111

71


Open frame

The steel basic frame is provided with four 19-inch profiles and will be

delivered with leveling feet. The frame is 542 mm wide, 740 mm deep

and 42 HE high. The compact frame can easily be moved through each

door.

Width Depth Unit


542 740 2000 Open frame MLR0111


72

2Front and rear

V

VERSATILE SOLUTION

EASE OF USE

ARICON-LANRACK

73


Components

Blind door

Steel door without perforation. The door will be delivered with

mounting brackets, hinges and a swivel handle Fix Easy with blind stop.

What’s in the box: 1 door with hinges, mounting brackets and a swivel handle Fix Easy

Door glass clear

Steel frame with clear safety glass panel. The door will be delivered with

mounting brackets, hinges and a swivel handle Fix Easy with blind stop.

What’s in the box: 1 door with hinges, mounting brackets and a swivel handle Fix Easy

Width mm

Unit 800

U Colour Part. no.

42 RAL 7047 MLR3211

Width mm

Unit 800

U Colour Part. no.

42 RAL 7047 MLR3311


74

2

What’s in the box: 1 top incl. mounting material

Side panel

The blind side panels are fast and easily removable by means of a square

6 lock. A mounting bracket is included.

What’s in the box: 1 panel with square 6 lock and a mounting bracket.

Top

Top with four press-out recesses. The top can be used in combination

with cable feed-through and ventilation.

Width Depth cut out

mm mm pcs Colour Part. no.

800 800 4 RAL 7047 MLR3112

Depth mm

Unit 800

U Colour Part. no.

42 RAL 7047 MLR3411

Material: Steel


75


Cable management

Shunting eye




Shunting eye




Shunting eye

The shunting eye for front mounting 1,5HE 52 x 86 mm (w x d) is used



Width: 35 mm

Depth: 64 mm



vertical - 100 pieces MCM1001

Width: 30 mm

Depth: 86 mm




Width: 52 mm

Depth: 86 mm


1.5 U - 1 piece MCM0003

1.5 U - 100 pieces MCM1003


76

2


The shunting eye for side mounting 19-inch - 110 x 154mm (w x d) is

used for cable management and can be mounted on 19-inch profiles.


Cable tray

Cable trays are used for vertical cable management. The cable tray can

be mounted easily to the vertical frame post.

What’s in the box: 1 cable tray incl. mouning material

Cable entry brush

Brush for cable entry. The brush will be assembled between the plate/

roof and the side panel.

What’s in the box: 1 cable entry brush incl. mounting material

Width: 110 mm

Depth: 154 mm


mounting on 19-inch - 1 piece MCM0007

mounting on 19-inch - 100 pieces MCM1007



Unit Width

U mm Part. no.

42 300 MLR4301


Cable entry brush 800mm deep MLR4501

77



Cable entry brush

Brush for cable entry. The brush can be mounted in the base plate or

roof.


Set of cable entry brushes max opening 153 x 427 mm MBM1003


78

2
Air flow optimalisation
What’s in the box: 1 fan unit incl. mounting material

Fan unit incl. 2 fans and wiring

This fan unit is provided with two fans. The fan unit should be fixed in

the base/roof plate.

Description Technical data Colour Part. no.

Fan unit including 2 fans and wiring RAL 9011 230VAC - 320m³/h - 48dB - 44Watt RAL 9011 MBM1007B

79


Accessories

What’s in the box: Baying kit MLR4201 contains 4 baying plates. Baying kit MLR4202 contains 4 strips. Baying kit MLR4203 contains 2 baying plates. All baying kits will be delivered incl. mounting material

Baying kit

Baying kits are needed to bay racks.


MLR4201 is suitable for baying racks (MLR1111) MLR4201

MLR4202 is suitable for baying open frames (MLR0111) MLR4202

MLR4203 is suitable for baying to Varicon-M racks MLR4203

Earthing cables (set)

Earthing cables are used for grounding doors and panels.

What’s in the box: 4 earthing cables 200 mm incl. mounting material

Material Colour Part. no.

Copper Yellow/green MLR4401


80

2

Cover plate

Plate to cover up the bottom or top of the cabinet. The cover plate can

be mounted in the base plate or roof.

What’s in the box: 1 cover plate incl. mounting material

Corner guide rail

The corner guide rail supports your network equipment.

What’s in the box: Set of 2 corner guide rails, incl. mounting material


Cover plate RAL 9011 153 x 427 mm MBM1001B

Depth

mm Material Finishing Part. no.

300 Sheet metal Galvanised MLR4101


ou

sin

gs

- W

all e

ncl

osu

res

(VA

RIC

ON

)

Pre

-ass

em

ble

d

Co

mp

on

en

ts

Ca

ble

ma

na

ge

me

nt

Air

flo

w o

pti

ma

lisa

tio

n

Acc

ess

ori

es

Housings - Wall enclosures (VARICON)

82

3
Pre-assembled
What’s in the box: 1 back panel, 4 depth posts, 2 cable entry plates, 2 19´´ profiles, 2 top and bottom plates, 2 side panels, 1 glass door and 1 assembly set

MWE enclosure

The basic frame is built-up of a wall-mounting plate with integrated

cable strain, four depth profiles, two cable-entry plates (base and top)

and a set of 19-inch profiles. The assembly consists of two equal top and

base panels with ventilation slots to the rear, two equal side panels and

a safety glass door with a EK-333 cylinder lock with grip.

Unit Height Width Depth Weight

U mm mm mm Construction depth kg Part. no.

6 342 600 425 0 - 370 14 MWE06425G

6 342 600 525 0 - 470 16 MWE06525G

9 476 600 525 0 - 470 19 MWE09525G

9 476 600 625 0 - 570 21 MWE09625G

12 609 600 525 0 - 470 22 MWE12525G

12 609 600 625 0 - 570 24 MWE12625G

15 742 600 525 0 - 470 25 MWE15525G

15 742 600 625 0 - 570 28 MWE15625G

21 1009 600 625 0 - 570 34 MWE21625G

Colour: RAL 7047

Description: Glass door



83


What’s in the box: complete mounted enclosure with 2 keys

What’s in the box: complete mounted enclosure with 2 keys EK333

Duopac enclosure

The Duopac is built with one set of 19-inch profiles, mounted in the

front part of the enclosure. The enclosure has rubber-damping feet to

provide stabile and scratch-free standing. The top is ventilated. The

quick fit snap locking on the side panels allows easy removal and fitting.

Mounting material for wall fastening is not included.


U mm mm mm kg Part. no.

3 207 530 450 11 DUO.034515

6 343 530 450 14 DUO.064515

9 516 530 450 17 DUO.094515

Tripac wall enclosure

The Tripac is approved to IP Sealing Specification. The Tripac is provided

with a set of 19-inch profiles, and two mounting profiles on the wall

mounting plate. The cable can enter from either the top or bottom of

the enclosure. A cylinder lock secures the front door. Inside the centre

segment the lock can be opened.


U mm mm mm kg Part. no.

9 478 600 500 26 TRI.095015

15 744 600 500 34 TRI.155015

21 1011 600 500 43 TRI.215015

Colour: RAL 7047

Description: Door with grey tinted safety glass


Colour: RAL 7047


Description: Glass door grey tinted


84

3

V

Base

ARICON-WALL ENCLOSURES

85


Components

Ventilated metal doors

The ventilated metal door ensures that the MWE enclosure is visually

partitioned off. The door should be earthed using the earth cable

supplied.

What’s in the box: 1 sheet metal door, 1 earthing cable, incl. mounting material

Glazed doors

Glass panel door with clear glass for the MWE enclosure.

What’s in the box: 1 glazed door incl. mounting material

Width: 600 mm



Colour: RAL 7047

Width

Unit 600 mm

U Part. no.

6 MWEMD06

9 MWEMD09

12 MWEMD12

15 MWEMD15

21 MWEMD21

Width: 600 mm

Unit

U Part. no.

6 MWEGD06

9 MWEGD09

12 MWEGD12

15 MWEGD15


86

3

What’s in the box: 4 adjustable base legs, incl. mounting material

Top plate with fan unit

A fan unit can replace the blanc plates in the top of the enclosure to

assist cooling.

What’s in the box: 1 plate with 2 fan-units, incl. mounting material

Adjustable base legs

Adjustable base legs for uneven surfaces.

Height Maximum weight Thread length

mm kg mm Part. no.

25 1000 60 MSM1001

Depth

mm Part. no.

425 MWEFP-425-UK

525 MWEFP-525-UK

625 MWEFP-625-UK

Material: Plastic

87


Cable management

Shunting eye



What’s in the box: 1 shunting eye incl. mounting material

Shunting eye




Shunting eye

This cable ring is fitted to the side of the 19-inch profile of your MWE

wall enclosure. Because of the specific shape it will fit right in the space

between the side and your 19-inch profile. For vertical cable

management.


Width: 35 mm

Depth: 64 mm



Width: 30 mm

Depth: 86 mm



Width: 25 mm

Depth: 111 mm


Vertical side mounting MWECM01


88

3

What’s in the box: MCM0100: bundle of 100 pieces, FDH0420: 25 metres velcro, double-sided roll

Cable entry brush

For dust-free separate cable entry, instead of cable entry plates at the

bottom and/or top. Suitable for the MWE enclosure.


Shunting comb with 4 teeth

The shunting comb allows easy routing of cables.

What’s in the box: 1 shunting comb incl. mounting material

Velcro tapes

Velcro tapes to bundle cables and for fitting cables on various cable

trays quickly and securely.


Velcro tape 100 pieces MCM0100

25 metres velcro, double-sided roll FDH0420

Description Material Part. no.

Entry opening 360 mm Nylon MWECB01




with 4 rings, 2 x 1/2 HE x 70 mm RAL 7047 MCM0011

with 4 rings, 2 x 1/2 HE x 70 mm RAL 9011 MCM0011B

89


Air flow optimalisation

What’s in the box: 1 thermostate, cable included

What’s in the box: 1 fan unit incl. mounting material

Thermostat

The thermostat can be used together with the following fans:

Triple fan unit MCS1004(B)

Double fan unit TRI.VE.00.02

MWE roof panel with built-in double fan unit MWEFP425, MWEFP525

and MWEFP625

The thermostat ensures that the fan is turned on at the temperature

setting you select.


Thermostat MWETF02

Fan unit

This fan unit can be mounted in your Tripac wall enclosure.

Optional, with the thermostat MWETF01 you can switch this fan unit

automatically.


Fan unit 230VAC / 50 Hz - 110mA - 23 dB - 12 Watt TRI.VE.00.02


90

3
Accessories
19-inch profiles

Profiles are used for the assembly of 19-inch components. They are

adjustable in depth per 50 mm. It is possible to adjust the entire 19-inch

compartment in depth without moving the equipment. Profiles are

provided with a pitch of ½ U, to assemble accessories at the side.


19-inch profiles

Extra profiles can be ordered, among other things for the installation of

a server or a shelf. One set consists of two profiles.




Unit


6 Flat profiles MWEPR06






Unit


3 Flat profiles DUO.PR.03.00



91


What’s in the box: 1 shelve incl. mounting material

19-inch profiles

Extra profiles can be ordered, among other things for the installation of

a server or a shelf. One set consists of two profiles.


Shelves

Several perforated shelves are available for safe equipment installation.

The shelves are attached to the 19-inch profiles. The cantilever types will

be mounted at the front (standard) profiles only. The variable shelves

have to be attached at the rear side on 19-inch profiles as well. An

additional set of 19-inch profiles are required for the variable shelves.

Depth Construction space Maximum weight

mm Construction depth mm kg Description Part. no.

250 ? 89 12 Half floating 2 U MPL0311

250 250 - 400 12 50 Variable MPL0010

350 ? 89 12 Half floating 2 U MPL0312

350 250 - 500 12 50 Variable MPL0011

350 350 - 550 55 75 Variable telescopic MPL0111


Unit


9 Flat profiles TRI.PR.09.00






Colour: RAL 7047


92

3

What’s in the box: 1 corner guide rail left, 1 corner guide rail right, incl. mounting material

Corner guide rails

The corner guide rail (set of 2) supports heavy 19-inch equipment. They

are assembled at the side of the 19-inch profiles, and take up no rack

space.

Unit Maximum weight

U kg Description Part. no.

1 50 Corner guide rail MWECS01

Mounting material

The screws are designed for the use in your MWE wall enclosure. The kit

quantity is for one enclosure.

The plastic click fasteners can be used to assemble a power strip against

the rear side. For this you need four fasteners.

Caged nuts for mounting applications. They can be mounted in the

holes in the front and back of the 19-inch profiles.

Material Description Part. no.

Plastic Click fasteners for power strip mounting MWETN01

Plastic Decorative screws with washer (black) M5 - (20 pieces) MFM0010

Plastic Decorative screws with washer (black) M6 - (20 pieces) MFM0012

Steel Plate screws - (22 pieces) MWEXS01

Steel Cage nuts M5 - (20 pieces) MFM0001

Steel Cage nuts M6 - (20 pieces) MFM0003


Colour: Sendzimir

93


What’s in the box: single pieces incl. mounting material

Insert module

It is possible to use the following insert modules in your Duopac or

Tripac enclosure. Please note if modules are used, the enclosure will not

conform to IP Sealing Specification.


Cable entry brushes (set) Max. entry opening 360 x 50mm TRI.KA.00.01

Ventilation plate TRI.VP.00.01


CATALOGUE 2012-2013C

oo

ling

(V

AR

ICO

ND

ITIO

N)

Co

oli

ng

so

luti

on

s

Cooling (VARICONDITION)

96

4
Cooling solutions

97

Cooling (VARICONDITION)


98

4 M O N I T O R I N G S O L U T I O N S

RICONTROLV ®

Minkels offers a wide range of data centre monitoring solutions

under the brand name Varicontrol®: These vary from simple

power or environment monitoring solutions to fully integrated

data centre monitoring systems and software.

Please contact our specia

free of any further

obligation.

INTELLIGENT DATA CENTRE MONITORING SOLUTIONS

Energy monitoring

Power monitoring /

switching

Video monitoring

Access control

Environmental control

CATALOGUE 2012-2013M

on

ito

rin

g (

VA

RIC

ON

TRO

L)

Va

riC

on

tro

l-L

Va

riC

on

tro

l-S

Monitoring (VARICONTROL)

100

5
VariControl-L

01


1

VariControl-S


102

5

What’s in the box: incl. mounting material. Delivery time to be advised

Controllers

Varicontrol-S is able to monitor the direct environment within your

cabinet, it can even monitor a complete room.

Description

Sensor

ports

Dry-contact

ports

Camera

ports

Extension

ports Part. no.

VariControl-S controller with 2 sensor ports (inc. 1 temperature sensor)

2 MRM0001

VariControl-S controller with 4 sensor ports

4 MRM0003

VariControl-S controller with 8 sensor ports

8 MRM0010

VariControl-S Pro controller with 8 sensor ports and 4 extension ports

8 4 MRM0010LS

VariControl-S Pro controller with 8 sensor ports, 4 USB camera ports and 2 extension ports

8 4 2 MRM0011L

VariControl-S controller with 8 sensor ports and 20 dry contact ports

8 20 MRM0020

VariControl-S Pro controller with 8 sensor ports, 20 dry contact ports and 4 extension ports

8 20 4 MRM0020LS

VariControl-S controller with 8 sensor ports and 60 dry contact ports

8 60 MRM0030

VariControl-S Pro controller with 8 sensor ports, 60 dry contact ports and 4 extension ports

8 60 4 MRM0030LS

VariControl-S extension controller with 16 dry contact ports - The extension controller only works when used with a controller with extension ports

16 MRM0040

VariControl-S extension controller with 8 sensor ports - only works when used with a controller with extension ports

8 MRM0041

GPRS modemfor text message alerts (only with Pro controller)

MRM0042

03


1


Environmental sensors

Environmental sensors measure the environment of the IT equipment

and are connected to the VariControl-S controllers.


VariControl-S temperature sensor with a fixed cable (1 m) MRM0101

VariControl-S temperature sensor with a fixed cable (2.5 m) MRM0102

VariControl-S temperature sensor MRM0118

VariControl-S temperature sensor (daisy chain to a maximum of 8 sensors) - only works when used with a controller with extension ports

MRM0122

VariControl-S humidity and temperature sensor MRM0117

VariControl-S air flow sensor MRM0109


104

5


Security sensors

The security sensors monitor access to the data centre or the alarm

status of the equipment.


VariControl-S dry contact sensor with a fixed cable (5 m) MRM0113

VariControl-S dry contact sensor with 8 ports (only in combination with the Pro controller) MRM0124

VariControl-S magnetic door switch MRM0128

VariControl-S motion detector MRM0110

VariControl-S smoke alarm MRM0111

VariControl-S siren & flashing light MRM0119

VariControl-S universal camera (USB) MRM0130

VariControl-S dome camera with pan/tilt controls (USB) MRM0131

VariControl-S water leak detector with a fixed cable (4.5 m) MRM0105

VariControl-S water leak detector with a fixed cable (33 m) MRM0125

VariControl-S water leak detection loop (3.3 m) MRM0127

VariControl-S water leak detection loop extension (3.3 m). MRM0126

05


1


Other sensors

These sensors can be used for various applications, such as for turning

fan units on and off, or for integrating external sensors.


VariControl-S AC volt detector MRM0112

VariControl-S sensor controlled relay MRM0114

VariControl-S 4-20mA signal converter MRM0116


106

5 ®P O W E R D I S T R I B U T I O N S O L U T I O N S

RICONPOWERV

The Minkels VariconPower product line contains

a full range of data centre current distribution

solutions including:

Basic rack PDUs

Metered (local) rack PDUs

Monitored (remote) rack PDUs

Monitored & switched (remote) rack PDUs

If required, Minkels can supply VariconPower rack

PDUs which are precisely tailored to the customer’s

wishes and requirements. Options include 16A or

32A, single-phase or three-phase, and PDUs with or

without outlet switching.

The rack PDUs can also be supplied as a fully

integrated, pre-assembled solution in combination

with other Minkels data centre and server room

solutions.

Please contact us to receive advice tailored to your

needs. We will be happy to help.

RACK POWER DISTRIBUTION UNITS

Minkels has launched a new group of products under the name VariconPower®.

VariconPower represents a full range of rack PDUs, or Power Distribution Units, for server

racks. In adding the VariconPower product group with modules for server room power

solutions for server rooms and data centres.

CATALOGUE 2012-2013Po

wer

dis

trib

uti

on

(V

AR

ICO

NPO

WER

)

Ba

sic

Ra

ck P

DU

-

Va

rico

n-M

Ra

ck

Me

tere

d R

ack

PD

U

Mo

nit

ore

d (

Re

mo

te)

an

d M

on

ito

red

& S

wit

che

d R

ack

PD

U

Power distribution (VARICONPOWER)

108

6
Basic Rack PDU - Varicon-M Rack
What’s in the box: 1 power strip, 2 mounting sets, cable length 3m.

What’s in the box: 1 power strip, 2 mounting sets, cable length 3m

Power strips aluminium IEC-320 - 1 Phase, up to 16A

The IEC-320 power strip has C13 output connectors (optional 10 ampere

fused). 3 Meter cable length with C14 or CEE form (230V-16A) connector

is included.

Outlets Input connector Rack position Technical details Part. no.

C13 (8) C14 19-inch (1U) and vertical 1x fine fuse (max. 10A) MPS5004

C13 (12) CEE 19-inch (1U) and vertical MPS5014

C13 (12) C14 Vertical 1x fine fuse (max. 10A) MPS5002

C13 (16) C14 Vertical 1x fine fuse (max. 10A) MPS5003

C13 (18) CEE Vertical MPS5013

C13 (18), C19 (4) CEE Vertical MPS5015

Power strips aluminium BS 1363 - 1 Phase, up to 16A

The power strips are made of aluminum and meet the BS 1363

specifications.

The power strips are approved for 16 ampere.


BS 1363 (7) BS 1363 19-inch (1U) MPS4003

BS 1363 (13) BS 1363 Vertical MPS4001

09


1



Power strips aluminium - 1 Phase, up to 32A

The compact aluminium IEC-320 power strips are fitted with C13 and

C19 output connectors and are supplied with a 3-metre cable with a CEE

single-phase 32 amp connector. The power strips are available in

different versions.


C13 (8) CEE Vertical 2x MCB (16A per branch) MPS7001

C13 (8), C19 (4) CEE Vertical 2x MCB (16A per branch) MPS7002

C13 (24) CEE Vertical 2x MCB (16A per branch) MPS7003




three-phase 16 amp connector. The power strips are available in

different versions.


C13 (18), C19 (6) CEE Vertical MPS8001

C13 (12) CEE Vertical MPS8002


110

6





three-phase 32 amp connector. The power strips are available in

different versions.


C13 (18), C19 (6) CEE Vertical 6x MCB (2 per phase, 16A per branch) MPS9001

Mounting set for aluminium power strip

Mounting set for vertical installation of the power strip on the 19-inch

profiles.

What’s in the box: 1 mounting set incl. mounting material

Mounting set for aluminium power strip

These mounting sets are developed to mount power strips in situations

where there is minimum space available. With the MPS0095 it is possible

to mount 1 power strip and with the MPS0096 it is possible to mount 2

power strips behind the height posts of the bayed cabinet.

What’s in the box: 1 mounting set consists of 2 brackets to mount the power strip incl. mounting material


Mounting set for mounting one aluminium power strip.

MPS0097

Mounting set for mounting two aluminium power strips next to each other.

MPS0099


Mounting set for 1 aluminium power strip MPS0095

Mounting set for 2 aluminium power strips MPS0096

11


1

What’s in the box: 1 power strip incl. 19-inch mounting set excl. cables

Modular power strip

The Minkels modular power strips are specially designed for effective

power distribution in your rack. The power is distributed in the rack via

different modules. A module is a power strip of 19-inch width and 1U

high. This size makes it possible to mount the module on different

positions in your cabinet. The modules are interconnected with GST18

connectors. This flat connector has a maximum capacity of 16Amp and is

secured mechanically. Special input modules make it possible to build a

system with 32Amp or 3phase 16Amp.

Herewith you can flexibly distribute more power in your rack. These

input modules divide the power between more phases of 16Amp. Each

phase of 16Amp can be connected to extra modules via GST18

connectors. Besides readable ampere meters several modules can be

read over IP. This allows you to monitor your rack without being present

physically. With a web browser and a secured connection you can be

informed on the current status of a power strip. Further it is possible to

switch an outlet over IP. The modules can be mounted at 19-inch profiles

and in the 19-inch positions of the side skirts. It is also possible to mount

the modules vertically in the cabinet with special mounting brackets.

The different modules can be connected fast and easily to each other.

The modular system allows you to make changes to the power

distribution of your cabinet without interrupting the power supply.


GST18 (6), C19 (3) CEE (3F, 16A) 19-inch (1U) MPS6007

GST18 (4), C19 (2) CEE (1F, 32A) 19-inch (1U) Ampère meter MPS6009

GST18 (4), C19 (4) GST18 19-inch (1U) MPS6010

GST18 (1), C13 (12) GST18 19-inch (1U) MPS6011

GST18 (1), C13 (6) GST18 19-inch (1U) Monitored & switched per outlet

MPS6016

GST18 (4), C19 (3) GST18 19-inch (1U) Monitored MPS6017

SNMP communications agent for monitored PDU’s

MPS6022


112

6

What’s in the box: 1 Cable

Cables

The modules are connected with each other with GST18 connectors. The

flat connector has a maximum capacity of 16amp and is secured

mechanically. The modular system has 2 type input cables to feed the

system with a SCHUKO-, UTE- or a 16 amp single phase CEE-form

connector.


Connecting cable SCHUKO/UTE -> GST 18/3, length 3m MPS6001

Cable CEE 1 ph 16AMP 3m 1,5 mm^2 GST18 out MPS6003

Cable GST18 in 0,5m 1,5mm^2 GST18 out MPS6004

Connecting cable GST 18/3, length 2m, 2,5 mm^2 MPS6005

Connecting cable GST 18/3, length 3m, 2,5 mm^2 MPS6006

13


1

Metered Rack PDU


Metered Rack PDU

The Metered PDU is a product version that has all the options of a Basic

PDU. On top of that it has a display built in, with which it is possible to

read out live the inlet current of a server rack. This product version

doesn’t have the full range of intelligent functionalities. For example, a

Metered PDU will provide a snapshot and not an overview over time.

Also, it is not possible with this version to have remote access and

proactively manage the PDU.

Metered PDU’s however could be part of a first step in the creation of

(energy) efficiency awareness within an organization and the need for

an energy efficient server room design. As with the other product

versions customization is always an option.

Outlets

Input

connector

Rack

position Technical details Part. no.

C13 (18), C19 (4) CEE Vertical Single-phase, 16 amp - Ampère meter MPS5115

C13 (18), C19 (4) CEE Vertical Single-phase, 32 amp - 2x MCB (16A per branch), Ampère meter

MPS7102

C13 (18), C19 (6) CEE Vertical Three-phase, 16 amp - Ampère meter MPS8101

C13 (18), C19 (6) CEE Vertical Three-phase, 32 amp - 6x MCB (2 per phase, 16A per branch), Ampère meter

MPS9101


114

6
Monitored (Remote) and Monitored & Switched Rack PDU

CATALOGUE 2012-2013

Ind

ex

Index

Index by keyword

Description Article no. Page

A

B

Accessory package copper basic, 1300mm/25U/45ME VMA0104 7Accessory package copper basic, 2000mm/41U/73ME VMA0106 7Accessory package copper basic, 2200mm/46U/81ME VMA0107 7Accessory package copper plus, 1300mm/25U/45ME VMA0134 7Accessory package copper plus, 2000mm/41U/73ME VMA0136 7Accessory package copper plus, 2200mm/46U/81ME VMA0137 7Accessory package fiber basic, 1300mm/25U/45ME VMA0204 7Accessory package fiber basic, 2000mm/41U/73ME VMA0206 7Accessory package fiber basic, 2200mm/46U/81ME VMA0207 7Accessory package fiber plus, 1300mm/25U/45ME VMA0234 7Accessory package fiber plus, 2000mm/41U/73ME VMA0236 7Accessory package fiber plus, 2200mm/46U/81ME VMA0237 7Air intake valve 450 x 450mm - incl bottom plate set 1000mm RAL 7047 MCS3003 54Air intake valve 450 x 450mm - incl bottom plate set 1000mm RAL 9011 MCS3003B 54Air intake valve 450 x 450mm - incl bottom plate set 1200mm RAL 7047 MCS3004 54Air intake valve 450 x 450mm - incl bottom plate set 1200mm RAL 9011 MCS3004B 54

Base legs, adjustable, set of 4 MSM1001 11, 86Base legs, extended, set of 4 - 100mm (h) MSM2001 11Base plate middle blank - 1000mm (d) RAL 7047 MBM0113 16Base plate middle blank - 1200mm (d) RAL 7047 MBM0114 16Base plate middle blank - 600mm (d) RAL 7047 MBM0110 16Base plate middle blank - 800mm (d) RAL 7047 MBM0111 16Base plate middle blank - 900mm (d) RAL 7047 MBM0112 16Base plate middle with 3 cut-outs - 1000mm (d) RAL 7047 MBM0103 16Base plate middle with 3 cut-outs - 1000mm (d) RAL 9011 MBM0103B 16Base plate middle with 3 cut-outs - 1200mm (d) RAL 7047 MBM0104 16Base plate middle with 3 cut-outs - 1200mm (d) RAL 9011 MBM0104B 16Base plate middle with 3 cut-outs - 600mm (d) RAL 7047 MBM0100 16Base plate middle with 3 cut-outs - 800mm (d) RAL 7047 MBM0101 16Base plate middle with 3 cut-outs - 800mm (d) RAL 9011 MBM0101B 16Base plate middle with 3 cut-outs - 900mm (d) RAL 7047 MBM0102 16Baying kit MLR external, LANRack-LANRack baying MLR4201 79Baying kit MLR external, LANRack-Varicon M baying MLR4203 79Baying kit MLR external, open frame-open frame baying MLR4202 79Baying set RAL 7047 MFM0050 63Baying set RAL 9011 MFM0054 63Baying set external RAL 7047 MFM0051 63Baying set external RAL 9011 MFM0052 63Baying set internal MFM0053 63Blank part for base plate - 1000mm (d) RAL 7047 MBM0123 17Blank part for base plate - 1000mm (d) RAL 9011 MBM0123B 17Blank part for base plate - 1200mm (d) RAL 7047 MBM0124 17Blank part for base plate - 1200mm (d) RAL 9011 MBM0124B 17Blank part for base plate - 600mm (d) RAL 7047 MBM0120 17Blank part for base plate - 800mm (d) RAL 7047 MBM0121 17Blank part for base plate - 800mm (d) RAL 9011 MBM0121B 17Blank part for base plate - 800mm (d) RAL 9011 MFE0003B 57Blank part for base plate - 900mm (d) RAL 7047 MBM0122 17Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 7047 MCM0302 37Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 9011 MCM0302B 37Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 7047 MCM0317 39Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 9011 MCM0317B 39Broad cable duct (800 mm) with partition for 800 mm wide cabinet, RAL 7047 MCM0303 37Broad cable duct (800 mm) with partition for 800 mm wide cabinet, RAL 9011 MCM0303B 37Brushes for base plate - 1000mm (d) MBM0133 17Brushes for base plate - 1200mm (d) MBM0134 17Brushes for base plate - 600mm (d) MBM0130 17Brushes for base plate - 800mm (d) MBM0131 17Brushes for base plate - 900mm (d) MBM0132 17

Index


CCabinet, co-location 2 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 MCL20226010 8Cabinet, co-location 2 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 MCL21226010 8Cabinet, co-location 2 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 7047 MCL20226012 8Cabinet, co-location 2 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 9011 MCL21226012 8Cabinet, co-location 2 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 MCL20228010 8Cabinet, co-location 2 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 MCL21228010 8Cabinet, co-location 2 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 MCL20228012 8Cabinet, co-location 2 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 MCL21228012 8Cabinet, co-location 4 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 MCL40226010 8Cabinet, co-location 4 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 MCL41226010 8Cabinet, co-location 4 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 7047 MCL40226012 8Cabinet, co-location 4 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 9011 MCL41226012 8Cabinet, co-location 4 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 MCL40228010 8Cabinet, co-location 4 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 MCL41228010 8Cabinet, co-location 4 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 MCL40228012 8Cabinet, co-location 4 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 MCL41228012 8Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 7047 VME206010C 4Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 7047 VME206010S 4Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 9011 VME206010CB 4Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 9011 VME206010SB 4Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 VME226010C 4Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 VME226010S 4Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 VME226010CB 4Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 VME226010SB 4Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 7047 VME138010S 5Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 7047 VME138080S 5Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 9011 VME138010SB 5Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 7047 VME208010C 5Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 7047 VME208010S 5Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 9011 VME208010CB 5Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 9011 VME208010SB 5Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 VME228010C 5Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 VME228010S 5Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 VME228010CB 5Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 VME228010SB 5Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 7047 VME208012S 5Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 9011 VME208012CB 5Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 9011 VME208012SB 5Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 VME228012C 5Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 VME228012S 5Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 VME228012CB 5Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 VME228012SB 5Cabinet, server, pre-ass. - 800 x 800 x 1300mm/25U (w x d x h) RAL 9011 VME138080SB 5Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 VME208012C 5Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 VME208080C 5Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 VME208080S 5Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 9011 VME208080CB 5Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 9011 VME208080SB 5Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 7047 VME228080C 5Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 7047 VME228080S 5Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 9011 VME228080CB 5Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 9011 VME228080SB 5Cable bundle straps (100 pieces) - 2,5 x 100mm (w x l) MCM0101 47Cable bundle straps (100 pieces) - 2,5 x 360mm (w x l) MCM0102 47Cable cleat, diameter 60mm x 75mm MCM2011 42Cable entry brush MBM1003 19, 77Cable entry brush for base plate - 800mm MLR4501 76Cable entry brushes for Duopac and Tripac TRI.KA.00.01 93Cable entry foam - 19-inch x 1U RAL 7047 MCS5006 55Cable entry foam - 19-inch x 1U RAL 9011 MCS5006B 55Cable entry foam - 19-inch x 2U RAL 7047 MCS5004 54Cable entry foam - 19-inch x 2U RAL 9011 MCS5004B 54



D

Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 7047 MCS5005 54Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 9011 MCS5005B 54Cable entry plate - 19-inch x 1,5mm x 2U (l x d x h) RAL 7047 MCS5002 54, 55Cable entry plate - 19-inch x 1,5mm x 2U (l x d x h) RAL 9011 MCS5002B 54, 55Cable guide 38x, 41U mounting profile MCM2003 41Cable guide 43x, 46U mounting profile MCM2005 41Cable guide 76x, 41U mounting profile MCM2004 41Cable guide 86x, 46U mounting profile MCM2006 41Cable guide with controlled bend radius left MCM0023 45Cable guide with controlled bend radius right MCM0024 45Cable guides 10x and mounting bracket 25U MCM2014 41Cable guides 10x and mounting bracket 41U MCM2016 41Cable guides 10x and mounting bracket 46U MCM2017 41Cable guides 20x MCM2009 41Cable guides 6x and mounting bracket 6U MCM2001 41Cable tray sendzimir MLR - 300mm x 42HE MLR4301 76Cable tray sinked - 200mm x 25U (w x h) MCM0124 46Cable tray sinked - 200mm x 41U (w x h) MCM0126 46Cable tray sinked - 200mm x 46U (w x h) MCM0127 46Cable tray sinked - 300mm x 25U/45ME (w x h) MCM0134 46Cable tray sinked - 300mm x 41U (w x h) MCM0136 46Cable tray sinked - 300mm x 46U (w x h) MCM0137 46Cable trunk - 107 x 65 x 2000mm (w x d x h) MCM0052 46Cable trunk - 200 x 65 x 2000mm (w x d x h) MCM0053 46Cable trunk - 44 x 45 x 2000mm (w x d x h) MCM0050 46Cable trunk - 86 x 65 x 2000mm (w x d x h) MCM0051 46Cable overlength cassette - 19" MCM1111 48Cage nut M5 - (100 pieces) MFM0002 61Cage nut M5 - (20 pieces) MFM0001 61, 92Cage nut M6 - (100 pieces) MFM0004 61Cage nut M6 - (20 pieces) MFM0003 61, 92Castors, set of 2 castors with brakes and 2 castors without brakes MSM3002 12Castors, set of 4 castors without brakes MSM3001 12Cleats including 2U mounting plate RAL 7047 MCM2010 42Cleats including 2U mounting plate RAL 9011 MCM2010B 42Click fasteners for power strip mounting MWETN01 92Connecting cable CEE 1ph 16a GST 18/3, length 3m MPS6003 112Connecting cable GST 18/3, length 0,5m, 1,5 mm2 MPS6004 112Connecting cable GST 18/3, length 2m, 2,5 mm2 MPS6005 112Connecting cable GST 18/3, length 3m, 2,5 mm2 MPS6006 112Connecting cable SCHUKO/UTE -> GST 18/3, length 3m MPS6001 112Corner guide rails 1U (set) - build-in 300 - 450mm MPR0311 66Corner guide rails 1U (set) - build-in 450 - 750mm MPR0312 66Corner guide rails 1U (set) - build-in 740 - 1050mm MPR0313 66Corner guide rails MLR 1 HE, 2 pieces - 300mm MLR4101 80Cover plate RAL 7047 MBM1001 19Cover plate RAL 9011 MBM1001B 19, 80Cylinder lock MSP0199 30Cylinder, 2-points Fix Easy lock MLK0521 28Cylinder, 2-points Fix Easy lock MLK0522 28Cylinder, 2-points Fix Easy lock MLK0523 28

Depth post for divided 19-inch - 600 x 1000mm (w x d) MPR0173 34Depth post for divided 19-inch - 600 x 600mm (w x d) MPR0170 34Depth post for divided 19-inch - 600 x 800mm (w x d) MPR0171 34Depth post for divided 19-inch - 600 x 900mm (w x d) MPR0172 34Depth post for divided 19-inch - 800 x 1000mm (w x d) MPR1173 34Depth post for divided 19-inch - 800 x 1200mm (w x d) MPR1174 34Depth post for divided 19-inch - 800 x 600mm (w x d) MPR1170 34Depth post for divided 19-inch - 800 x 800mm (w x d) MPR1171 34Depth post for divided 19-inch - 800 x 900mm (w x d) MPR1172 34Depth post frame for 19-inch profiles (2x) (2x) - 1200mm (d) MPR0194 32

Index

Description Article no. PageDepth post frame for 19-inch profiles (2x) - 1000mm (d) MPR0193 32Depth post frame for 19-inch profiles (2x) - 600mm (d) MPR0190 32Depth post frame for 19-inch profiles (2x) - 800mm (d) MPR0191 32Depth post frame for 19-inch profiles (2x) - 900mm (d) MPR0192 32Depth post frame for 19-inch profiles - 1000mm (d) MPR0163 32Depth post frame for 19-inch profiles - 1200mm (d) MPR0164 32Depth post frame for 19-inch profiles - 600mm (d) MPR0160 32Depth post frame for 19-inch profiles - 800mm (d) MPR0161 32Depth post frame for 19-inch profiles - 900mm (d) MPR0162 32Document holder, A4-size, installation space 30mm MDH0001 64Door MLR, single, blind - 800 x 42HE (w x h) MLR3211 73Door MLR, single, glass - 800 x 42HE (w x h) MLR3311 73Door seal, rubber - 12U/21ME MFR0001 27Door seal, rubber - 16U/29ME MFR0002 27Door seal, rubber - 21U/37ME MFR0003 27Door seal, rubber - 25U/45ME MFR0004 27Door seal, rubber - 37U/65ME MFR0005 27Door seal, rubber - 41U/73ME MFR0006 27Door seal, rubber - 46U/81ME MFR0007 27Door switch MLS0005 65Door, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 7047 MFD7006 21Door, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 9011 MFD7006B 21Door, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 7047 MFD7007 21Door, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 9011 MFD7007B 21Door, 80% ventilated - 800mm x 25U/45ME (w x h) RAL 7047 MFD7104 21Door, 80% ventilated - 800mm x 25U/45ME (w x h) RAL 9011 MFD7104B 21Door, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 7047 MFD7106 21Door, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 9011 MFD7106B 21Door, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 7047 MFD7107 21Door, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 9011 MFD7107B 21Door, blank - 600mm x 12U/21ME (w x h) RAL 7047 MFD0001 20Door, blank - 600mm x 16U/29ME (w x h) RAL 7047 MFD0002 20Door, blank - 600mm x 21U/37ME (w x h) RAL 7047 MFD0003 20Door, blank - 600mm x 25U/45ME (w x h) RAL 7047 MFD0004 20Door, blank - 600mm x 37U/65ME (w x h) RAL 7047 MFD0005 20Door, blank - 600mm x 41U/73ME (w x h) RAL 7047 MFD0006 20Door, blank - 600mm x 41U/73ME (w x h) RAL 9011 MFD0006B 20Door, blank - 600mm x 46U/81ME (w x h) RAL 7047 MFD0007 20Door, blank - 600mm x 46U/81ME (w x h) RAL 9011 MFD0007B 20Door, blank - 800mm x 25U/45ME (w x h) RAL 7047 MFD0104 20Door, blank - 800mm x 37U/65ME (w x h) RAL 7047 MFD0105 20Door, blank - 800mm x 41U/73ME (w x h) RAL 7047 MFD0106 20Door, blank - 800mm x 41U/73ME (w x h) RAL 9011 MFD0106B 20Door, blank - 800mm x 46U/81ME (w x h) RAL 7047 MFD0107 20Door, blank - 800mm x 46U/81ME (w x h) RAL 9011 MFD0107B 20Door, double, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 7047 MDD7006 25Door, double, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 9011 MDD7006B 25Door, double, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 7047 MDD7007 25Door, double, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 9011 MDD7007B 25Door, double, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 7047 MDD7106 25Door, double, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 9011 MDD7106B 25Door, double, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 7047 MDD7107 25Door, double, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 9011 MDD7107B 25Door, double, blank - 600mm x 41U/73ME (w x h) RAL 7047 MDD0006 24Door, double, blank - 600mm x 46U/81ME (w x h) RAL 7047 MDD0007 24Door, double, blank - 800mm x 41U/73ME (w x h) RAL 7047 MDD0106 24Door, double, blank - 800mm x 46U/81ME (w x h) RAL 7047 MDD0107 24Door, double, glass grey tinted - 600mm x 41U/73ME (w x h) RAL 7047 MDD1016 26Door, double, glass grey tinted - 600mm x 46U/81ME (w x h) RAL 7047 MDD1017 26Door, double, glass grey tinted - 800mm x 41U/73ME (w x h) RAL 7047 MDD1116 26Door, double, glass grey tinted - 800mm x 46U/81ME (w x h) RAL 7047 MDD1117 26Door, glass clear - 600mm x 12U/21ME (w x h) RAL 7047 MFD1001 23Door, glass clear - 600mm x 16U/29ME (w x h) RAL 7047 MFD1002 23Door, glass clear - 600mm x 21U/37ME (w x h) RAL 7047 MFD1003 23



E

F

Door, glass clear - 600mm x 25U/45ME (w x h) RAL 7047 MFD1004 23Door, glass clear - 600mm x 37U/65ME (w x h) RAL 7047 MFD1005 23Door, glass clear - 600mm x 41U/73ME (w x h) RAL 7047 MFD1006 23Door, glass clear - 600mm x 41U/73ME (w x h) RAL 9011 MFD1006B 23Door, glass clear - 600mm x 46U/81ME (w x h) RAL 7047 MFD1007 23Door, glass clear - 600mm x 46U/81ME (w x h) RAL 9011 MFD1007B 23Door, glass clear - 800mm x 25U/45ME (w x h) RAL 7047 MFD1104 23Door, glass clear - 800mm x 37U/65ME (w x h) RAL 7047 MFD1105 23Door, glass clear - 800mm x 41U/73ME (w x h) RAL 7047 MFD1106 23Door, glass clear - 800mm x 41U/73ME (w x h) RAL 9011 MFD1106B 23Door, glass clear - 800mm x 46U/81ME (w x h) RAL 7047 MFD1107 23Door, glass clear - 800mm x 46U/81ME (w x h) RAL 9011 MFD1107B 23Door, glass grey tinted - 600mm x 12U/21ME (w x h) RAL 7047 MFD2001 22Door, glass grey tinted - 600mm x 16U/29ME (w x h) RAL 7047 MFD2002 22Door, glass grey tinted - 600mm x 21U/37ME (w x h) RAL 7047 MFD2003 22Door, glass grey tinted - 600mm x 25U/45ME (w x h) RAL 7047 MFD2004 22Door, glass grey tinted - 600mm x 37U/65ME (w x h) RAL 7047 MFD2005 22Door, glass grey tinted - 600mm x 41U/73ME (w x h) RAL 7047 MFD2006 22Door, glass grey tinted - 600mm x 46U/81ME (w x h) RAL 7047 MFD2007 22Door, glass grey tinted - 800mm x 25U/45ME (w x h) RAL 7047 MFD2104 22Door, glass grey tinted - 800mm x 37U/65ME (w x h) RAL 7047 MFD2105 22Door, glass grey tinted - 800mm x 41U/73ME (w x h) RAL 7047 MFD2106 22Door, glass grey tinted - 800mm x 46U/81ME (w x h) RAL 7047 MFD2107 22Door, glass grey tinted, ventilated - 800mm x 25U/45ME (w x h) RAL 7047 MFD4114 24Door, glass grey tinted, ventilated - 800mm x 41U/73ME (w x h) RAL 7047 MFD4116 24Door, glass grey tinted, ventilated - 800mm x 46U/81ME (w x h) RAL 7047 MFD4117 24Duopac, 19-inch profiles, set of 2 - 3U (h) DUO.PR.03.00 90Duopac, 19-inch profiles, set of 2 - 6U (h) DUO.PR.06.00 90Duopac, 19-inch profiles, set of 2 - 9U (h) DUO.PR.09.00 90Duopac, enclosure - 530 x 450 x 207mm/3U (w x d x h) DUO.034515 83Duopac, enclosure - 530 x 450 x 343mm/6U (w x d x h) DUO.064515 83Duopac, enclosure - 530 x 450 x 516mm/9U (w x d x h) DUO.094515 83

Earthing, cable set Varicon-LAN-Rack MLR4401 79Earthing, earthing cables - 3x 200mm and 3x 400mm MER0001 64Earthing, earthrail copper - 20 x 5 x 1800mm/73ME (w x d x h) MER0106 64Earthing, earthrail copper - 20 x 5 x 2000mm/81ME (w x d x h) MER0107 64Earthing, potential equalising rail MER0003 63End plate for broad cable duct RAL 7047 MCM0321 38End plate for broad cable duct RAL 9011 MCM0321B 38End plate for narrow cable duct RAL 7047 MCM0320 38End plate for narrow cable duct RAL 9011 MCM0320B 38Extension kit, 100mm, for frame 41U/73MU - 600mm (w) RAL 7047 VMF206010 27Extension kit, 100mm, for frame 41U/73MU - 800mm (w) RAL 7047 VMF208010 27Extension kit, 100mm, for frame 46U/81MU - 600mm (w) RAL 7047 VMF226010 27Extension kit, 100mm, for frame 46U/81MU - 800mm (w) RAL 7047 VMF228010 27

Filter set for plinths - 600mm (w) MSM2301 13Filter set for plinths - 800mm (w) MSM2302 13Flat profiles, 19-inch, set of 2 - 12U/21ME (h) MPR0601 31Flat profiles, 19-inch, set of 2 - 16U/29ME (h) MPR0602 31Flat profiles, 19-inch, set of 2 - 21U/37ME (h) MPR0603 31Flat profiles, 19-inch, set of 2 - 25U/45ME (h) MPR0604 31Flat profiles, 19-inch, set of 2 - 25U/45ME (h) with angle brackets on top MPR0704 33Flat profiles, 19-inch, set of 2 - 37U/65ME (h) MPR0605 31Flat profiles, 19-inch, set of 2 - 37U/65ME (h) with angle brackets on top MPR0705 33Flat profiles, 19-inch, set of 2 - 41U/73ME (h) MPR0606 31Flat profiles, 19-inch, set of 2 - 41U/73ME (h) with angle brackets on top MPR0706 33Flat profiles, 19-inch, set of 2 - 46U/81ME (h) MPR0607 31Flat profiles, 19-inch, set of 2 - 46U/81ME (h) with angle brackets on top MPR0707 33Floor fixation set- 1 point MSM4100 15

Index

Description Article no. PageFrame - 600 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF1360100 10Frame - 600 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF2060100 10Frame - 600 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 9011 VMF2060100B 10Frame - 600 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF2260100 10Frame - 600 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 9011 VMF2260100B 10Frame - 600 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF2060120 10Frame - 600 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 9011 VMF2060120B 10Frame - 600 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF2260120 10Frame - 600 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 9011 VMF2260120B 10Frame - 600 x 600 x 1100mm/21U/37ME (w x d x h) RAL 7047 VMF116060 10Frame - 600 x 600 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF136060 10Frame - 600 x 600 x 1800mm/37U/65ME (w x d x h) RAL 7047 VMF186060 10Frame - 600 x 600 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF206060 10Frame - 600 x 600 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF226060 10Frame - 600 x 600 x 700mm/12U/21ME (w x d x h) RAL 7047 VMF076060 10Frame - 600 x 600 x 900mm/16U/29ME (w x d x h) RAL 7047 VMF096060 10Frame - 600 x 800 x 1100mm/21U/37ME (w x d x h) RAL 7047 VMF116080 10Frame - 600 x 800 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF136080 10Frame - 600 x 800 x 1800mm/37U/65ME (w x d x h) RAL 7047 VMF186080 10Frame - 600 x 800 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF206080 10Frame - 600 x 800 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF226080 10Frame - 600 x 800 x 700mm/12U/21ME (w x d x h) RAL 7047 VMF076080 10Frame - 600 x 800 x 900mm/16U/29ME (w x d x h) RAL 7047 VMF096080 10Frame - 600 x 900 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF136090 10Frame - 600 x 900 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF206090 10Frame - 600 x 900 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF226090 10Frame - 800 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF1380100 10Frame - 800 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 9011 VMF1380100B 10Frame - 800 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF2080100 10Frame - 800 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 9011 VMF2080100B 10Frame - 800 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF2280100 10Frame - 800 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 9011 VMF2280100B 10Frame - 800 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF2080120 10Frame - 800 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 9011 VMF2080120B 10Frame - 800 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF2280120 10Frame - 800 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 9011 VMF2280120B 10Frame - 800 x 600 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF138060 10Frame - 800 x 600 x 1800mm/37U/65ME (w x d x h) RAL 7047 VMF188060 10Frame - 800 x 600 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF208060 10Frame - 800 x 600 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF228060 10Frame - 800 x 800 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF138080 10Frame - 800 x 800 x 1300mm/25U/45ME (w x d x h) RAL 9011 VMF138080B 10Frame - 800 x 800 x 1800mm/37U/65ME (w x d x h) RAL 7047 VMF188080 10Frame - 800 x 800 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF208080 10Frame - 800 x 800 x 2000mm/41U/73ME (w x d x h) RAL 9011 VMF208080B 10Frame - 800 x 800 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF228080 10Frame - 800 x 800 x 2200mm/46U/81ME (w x d x h) RAL 9011 VMF228080B 10Frame - 800 x 900 x 1300mm/25U/45ME (w x d x h) RAL 7047 VMF138090 10Frame - 800 x 900 x 2000mm/41U/73ME (w x d x h) RAL 7047 VMF208090 10Frame - 800 x 900 x 2200mm/46U/81ME (w x d x h) RAL 7047 VMF228090 10Front panel, MFE - 19-inch x 1mm x 1U (w x d x h) RAL 7047 MFE0101 49Front panel, MFE - 19-inch x 1mm x 1U (w x d x h) RAL 9011 MFE0101B 49Front panel, MFE - 19-inch x 1mm x 2U (w x d x h) RAL 7047 MFE0102 49Front panel, MFE - 19-inch x 1mm x 2U (w x d x h) RAL 9011 MFE0102B 49Front panel, MFE - 19-inch x 1mm x 3U (w x d x h) RAL 7047 MFE0103 49Front panel, MFE - 19-inch x 1mm x 3U (w x d x h) RAL 9011 MFE0103B 49Front panel, MFE - 19-inch x 1mm x 6U (w x d x h) RAL 7047 MFE0104 49Front panel, MFE - 19-inch x 1mm x 6U (w x d x h) RAL 9011 MFE0104B 49Front panel, MFE - 19-inch x 1mm x 9U (w x d x h) RAL 7047 MFE0105 49Front panel, MFE - 19-inch x 1mm x 9U (w x d x h) RAL 9011 MFE0105B 49Front panel, MFE - set of 4x MFE0104 RAL 7047 MFE0114 50Front panel, MFE - set of 4x MFE0104B RAL 9011 MFE0114B 50Front panel, MFE - set of 6x MFE0101 RAL 7047 MFE0111 50Front panel, MFE - set of 6x MFE0101B RAL 9011 MFE0111B 50



H

L

M

Front panel, MFE - set of 6x MFE0102 RAL 7047 MFE0112 50Front panel, MFE - set of 6x MFE0102B RAL 9011 MFE0112B 50Front panel, MFE - set of 6x MFE0103 RAL 7047 MFE0113 50Front panel, MFE - set of 6x MFE0103B RAL 9011 MFE0113B 50

Heat baffle RAL 7047 MCS2001 53Heat baffle RAL 9011 MCS2001B 53

Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 7047 MCM0312 38Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 9011 MCM0312B 38Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 7047 MCM0313 38Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 9011 MCM0313B 38Lid for broad cable duct (600 mm) for Varicondition H2O/DX, RAL 7047 MCM0319 39Lid for broad cable duct (600 mm) for Varicondition H2O/DX, RAL 9011 MCM0319B 39Lid for cable bridge (150mm wide) 150-1030mm, RAL 7047 MCM0323 41Lid for cable bridge (150mm wide) 150-1030mm, RAL 9011 MCM0323B 41Lid for cable bridge (150mm wide) 150-1700mm, RAL 7047 MCM0322 41Lid for cable bridge (150mm wide) 150-1700mm, RAL 9011 MCM0322B 41Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 MCM0310 38Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 MCM0310B 38Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 MCM0311 38Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 MCM0311B 38Lid for narrow cable duct (200 mm) for Varicondition H2O/DX, RAL 7047 MCM0318 39Lid for narrow cable duct (200 mm) for Varicondition H2O/DX, RAL 9011 MCM0318B 39Lock, blind stop for swivel handle MLK9001 29Lock, for swivel handle, EK-333 MLK9003 29Lock, wilka lock for swivel handle MLK9004 29Locking mechanism internal left - 1000mm (d) MSA0301 30Locking mechanism internal left - 600mm (d) MSA0001 30Locking mechanism internal left - 800mm (d) MSA0101 30Locking mechanism internal left - 900mm (d) MSA0201 30Locking mechanism internal right - 1000mm (d) MSA0302 30Locking mechanism internal right - 600mm (d) MSA0002 30Locking mechanism internal right - 800mm (d) MSA0102 30Locking mechanism internal right - 900mm (d) MSA0202 30

MWE, 19-inch profiles, set of 2 - 12U (h) MWEPR12 90MWE, 19-inch profiles, set of 2 - 15U (h) MWEPR15 90MWE, 19-inch profiles, set of 2 - 21U (h) MWEPR21 90MWE, 19-inch profiles, set of 2 - 6U (h) MWEPR06 90MWE, 19-inch profiles, set of 2 - 9U (h) MWEPR09 90MWE, cable entry brush MWECB01 88MWE, cable ring 19-inch mounted MWECM01 87MWE, corner guide rails, set of 2 - 1U (h) MWECS01 92MWE, door, metal, powder coated - 12U (h) MWEMD12 85MWE, door, metal, powder coated - 15U (h) MWEMD15 85MWE, door, metal, powder coated - 21U (h) MWEMD21 85MWE, door, metal, powder coated - 6U (h) MWEMD06 85MWE, door, metal, powder coated - 9U (h) MWEMD09 85MWE, wall enclosure - 600 x 425 x 342mm/6HE (w x d x h) MWE06425G 82MWE, wall enclosure - 600 x 525 x 342mm/6HE (w x d x h) MWE06525G 82MWE, wall enclosure - 600 x 525 x 476mm/9HE (w x d x h) MWE09525G 82MWE, wall enclosure - 600 x 525 x 609mm/12HE (w x d x h) MWE12525G 82MWE, wall enclosure - 600 x 525 x 742mm/15HE (w x d x h) MWE15525G 82MWE, wall enclosure - 600 x 625 x 1009mm/21HE (w x d x h) MWE21625G 82MWE, wall enclosure - 600 x 625 x 476mm/9HE (w x d x h) MWE09625G 82MWE, wall enclosure - 600 x 625 x 609mm/12HE (w x d x h) MWE12625G 82MWE, wall enclosure - 600 x 625 x 742mm/15HE (w x d x h) MWE15625G 82Minkels 1U front panel, plastic RAL9005, 25 pieces MFE1105 51

Index


N

P

Mix of frontpanels, 240 U in total RAL 7047 MFE1120 51Mix of frontpanels, 240 U in total RAL 9011 MFE1120B 51Modulaire PDU 4*GST-18F + 3*C19 metered MPS6017 111Modulaire PDU 6*C13 metered and switchable per socket + GST-18F MPS6016 111Mounting- air closure plate 19” for max. 17’’ TFT monitor, RAL 9011, 8U MPM0001 66Mounting bracket (4x) for the cable cleat + 4x cable cleat MCM2020 42Mounting depth post - 1000mm (d) MPR0153 36Mounting depth post - 1200mm (d) MPR0154 36Mounting depth post - 600mm (d) MPR0150 36Mounting depth post - 800mm (d) MPR0151 36Mounting depth post - 900mm (d) MPR0152 36Mounting material, plate screws, 22 pieces MWEXS01 92Mounting set for two power strips besides each other MPS0099 110Mounting width post - 600mm (w) MPR0100 36Mounting width post - 800mm (w) MPR0101 36Mounting-brackets universal (set of 4) MCE0410 63

Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 MCM0300 37Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 MCM0300B 37Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 MCM0301 37Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 MCM0301B 37Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 7047 MCM0316 39Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 9011 MCM0316B 39

Partition cable duct small (200mm) for 600mm wide cabinet, RAL 7047 MCM0410 37Partition cable duct small (200mm) for 600mm wide cabinet, RAL 9011 MCM0410B 37Partition cable duct small (200mm) for 800mm wide cabinet, RAL 7047 MCM0412 37Partition cable duct small (200mm) for 800mm wide cabinet, RAL 9011 MCM0412B 37Plinth 100mm front/rear, blank - 600mm (w) RAL 7047 MSM2101 13Plinth 100mm front/rear, blank - 600mm (w) RAL 9011 MSM2101B 13Plinth 100mm front/rear, blank - 800mm (w) RAL 7047 MSM2201 13Plinth 100mm front/rear, blank - 800mm (w) RAL 9011 MSM2201B 13Plinth 100mm front/rear, perforated - 600mm (w) RAL 7047 MSM2102 13Plinth 100mm front/rear, perforated - 600mm (w) RAL 9011 MSM2102B 13Plinth 100mm front/rear, perforated - 800mm (w) RAL 7047 MSM2202 13Plinth 100mm front/rear, perforated - 800mm (w) RAL 9011 MSM2202B 13Plinth 100mm side, blank - 1000mm (d) MSM2503 14Plinth 100mm side, blank - 1000mm (d) RAL 9011 MSM2503B 14Plinth 100mm side, blank - 1200mm (d) RAL 7047 MSM2603 14Plinth 100mm side, blank - 1200mm (d) RAL 9011 MSM2603B 14Plinth 100mm side, blank - 600mm (d) RAL 7047 MSM2103 14Plinth 100mm side, blank - 800mm (d) RAL 7047 MSM2203 14Plinth 100mm side, blank - 800mm (d) RAL 9011 MSM2203B 14Plinth 100mm side, blank - 900mm (d) MSM2403 14Plinth 100mm side, perforated - 1000mm (d) RAL 7047 MSM2504 14Plinth 100mm side, perforated - 1000mm (d) RAL 9011 MSM2504B 14Plinth 100mm side, perforated - 1200mm (d) RAL 7047 MSM2604 14Plinth 100mm side, perforated - 1200mm (d) RAL 9011 MSM2604B 14Plinth 100mm side, perforated - 600mm (d) RAL 7047 MSM2104 14Plinth 100mm side, perforated - 800mm (d) RAL 7047 MSM2204 14Plinth 100mm side, perforated - 800mm (d) RAL 9011 MSM2204B 14Plinth 25mm front/rear, blank - 600mm (w) RAL 7047 MSM1101 12Plinth 25mm front/rear, blank - 600mm (w) RAL 9011 MSM1101B 12Plinth 25mm front/rear, blank - 800mm (w) AG2RAL 9011 MSM1201B 12Plinth 25mm front/rear, blank - 800mm (w) RAL 7047 MSM1201 12Plinth 25mm front/rear, perforated - 600mm (w) RAL 7047 MSM1102 12Plinth 25mm front/rear, perforated - 600mm (w) RAL 9011 MSM1102B 12Plinth 25mm front/rear, perforated - 800mm (w) RAL 7047 MSM1202 12Plinth 25mm front/rear, perforated - 800mm (w) RAL 9011 MSM1202B 12Plinth 25mm side, blank - 1000mm (d) RAL 7047 MSM1403 13Plinth 25mm side, blank - 1000mm (d) RAL 9011 MSM1403B 13



R

Plinth 25mm side, blank - 1200mm (d) RAL 7047 MSM1503 13Plinth 25mm side, blank - 1200mm (d) RAL 9011 MSM1503B 13Plinth 25mm side, blank - 600mm (d) RAL 7047 MSM1103 13Plinth 25mm side, blank - 800mm (d) RAL 7047 MSM1203 13Plinth 25mm side, blank - 800mm (d) RAL 9011 MSM1203B 13Plinth 25mm side, blank - 900mm (d) RAL 7047 MSM1303 13Plinth front/rear (in combination with castors) - 600mm (w) RAL 7047 MSM3101 14Plinth front/rear (in combination with castors) - 800mm (w) RAL 7047 MSM3201 14Plinth side (in combination with castors) - 1000mm (d) RAL 7047 MSM3403 15Plinth side (in combination with castors) - 600mm (d) RAL 7047 MSM3103 15Plinth side (in combination with castors) - 800mm (d) RAL 7047 MSM3203 15Plinth side (in combination with castors) - 900mm (d) RAL 7047 MSM3303 15Power strip 12*C13 + GST-18 M en F MPS6011 111Power strip 4*GST-18F + 4*C19 MPS6010 111Power strip 8*SCHUKO + GST-18 M en F MPS6012 111Power strip CEE-form 16A 3ph 3*(2*GST-18F + 1*C19) MPS6007 111Power strip CEE-form 32A 1ph 2*(GST-18F + C19 +fuse+ampmeter) MPS6009 111Power strip PDU 8* UTE + GST-18 M en F MPS6013 111Power strip alu, IEC-320 with CEE-form input, 19-inch mounting, 12-sockets MPS5014 108Power strip alu, IEC-320 with CEE-form input, 19-inch mounting, 18-sockets MPS5013 108Power strip aluminium Mounting set compact double MPS0096 110Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19 MPS5015 108Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19, current meter MPS5115 113Power strip aluminium, 1-phase, 32A, 18xC13 and 4xC19 MPS7002 109Power strip aluminium, 1-phase, 32A, 18xC13 and 4xC19, current meter MPS7102 113Power strip aluminium, 1-phase, 32A, 24xC13 MPS7003 109Power strip aluminium, 1-phase, 32A, 8xC13 MPS7001 109Power strip aluminium, 3-phase, 16A, 12xC13 MPS8002 109Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19 MPS8001 109Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19, current meter MPS8101 113Power strip aluminium, 3-phase, 32A, 18xC13 and 6xC19 MPS9001 110Power strip aluminium, 3-phase, 32A, 18xC13 and 6xC19, current meter MPS9101 113Power strip aluminium, IEC-320, 12-head MPS5002 108Power strip aluminium, IEC-320, 16-head MPS5003 108Power strip aluminium, mounting set MPS0097 110Power strip aluminium, mounting set compact MPS0095 110Profiles, metric, set of 2 - 21ME (h) MPR1001 31Profiles, metric, set of 2 - 29ME (h) MPR1002 31Profiles, metric, set of 2 - 37ME (h) MPR1003 31Profiles, metric, set of 2 - 45ME (h) MPR1004 31Profiles, metric, set of 2 - 65ME (h) MPR1005 31Profiles, metric, set of 2 - 73ME (h) MPR1006 31Profiles, metric, set of 2 - 81ME (h) MPR1007 31Profiles, number strip for 19-inch profile 46U (h) MPR0060 32Profiles, number strip for metric profile 81ME (h) MPR0061 32Pull relief, adjustable MPR0251 35

Rack, MLR - base frame, 542 x 740 x 2000mm 42HE (b x d x h) MLR0111 71Rack, MLR - baying rack, 800 x 800 x 2000mm 42HE (b x d x h) MLR1111 70Rack, MLR - stand alone rack, 800 x 800 x 2000mm 42HE (b x d x h) MLR2111 70Rear panel - 600mm x 12U/21ME (w x h) RAL 7047 MRP0001 26Rear panel - 600mm x 16U/29ME (w x h) RAL 7047 MRP0002 26Rear panel - 600mm x 21U/37ME (w x h) RAL 7047 MRP0003 26Rear panel - 600mm x 25U/45ME (w x h) RAL 7047 MRP0004 26Rear panel - 600mm x 37U/65ME (w x h) RAL 7047 MRP0005 26Rear panel - 600mm x 41U/73ME (w x h) RAL 7047 MRP0006 26Rear panel - 600mm x 46U/81ME (w x h) RAL 7047 MRP0007 26Rear panel - 800mm x 25U/45ME (w x h) RAL 7047 MRP0104 26Rear panel - 800mm x 37U/65ME (w x h) RAL 7047 MRP0105 26Rear panel - 800mm x 41U/73ME (w x h) RAL 7047 MRP0106 26Rear panel - 800mm x 46U/81ME (w x h) RAL 7047 MRP0107 26

Index


SSNMP communications agent for power- (2x) and environmental monitoring (4x) MPS6022 111Screws, decorative, with washer (black) M5 - (100 pieces) MFM0011 62Screws, decorative, with washer (black) M5 - (20 pieces) MFM0010 62, 92Screws, decorative, with washer (black) M6 - (100 pieces) MFM0013 62Screws, decorative, with washer (black) M6 - (20 pieces) MFM0012 62, 92Shelf, MFE - 19-inch x 250 x 18,5mm (w x d x h) RAL 7047 MFE0001 57Shelf, MFE - 19-inch x 350 x 18,5mm (w x d x h) RAL 7047 MFE0002 57Shelf, MFE - 19-inch x 500 x 18,5mm (w x d x h) RAL 7047 MFE0003 57Shelf, MFE - 19-inch x 650 x 18,5mm (w x d x h) RAL 7047 MFE0004 57Shelf, MFE - 19-inch x 650 x 18,5mm (w x d x h) RAL 9011 MFE0004B 57Shelf, MFE - fixing clips, set of 4 pieces MFE0020 57Shelf, cable guide for telescopic shelf MPA0003 60Shelf, cantilever - 19-inch x 250mm x 2U (w x d x h) RAL 7047 MPL0311 59, 91Shelf, cantilever - 19-inch x 350mm x 2U (w x d x h) RAL 7047 MPL0312 59, 91Shelf, cantilever - 19-inch x 350mm x 2U (w x d x h) RAL 9011 MPL0312B 59Shelf, full size fixed - 600 x 600mm (w x d) RAL 7047 MPL0411 60Shelf, full size fixed - 600 x 800mm (w x d) RAL 7047 MPL0412 60Shelf, full size fixed - 800 x 600mm (w x d) RAL 7047 MPL0511 60Shelf, full size fixed - 800 x 800mm (w x d) RAL 7047 MPL0512 60Shelf, stiffener rib for full size shelves - 500mm (d) MPA0010 61Shelf, stiffener rib for full size shelves - 700mm (d) MPA0011 61Shelf, telescopic - 19-inch x 350 x 55mm (w x d x h) RAL 7047 MPL0111 58, 91Shelf, telescopic - 19-inch x 500 x 55mm (w x d x h) RAL 7047 MPL0112 58Shelf, telescopic - 19-inch x 700 x 55mm (w x d x h) RAL 7047 MPL0113 58Shelf, telescopic keyboard - build-in 400 - 700mm RAL 7047 MPK0001 59Shelf, telescopic keyboard - build-in 600 - 900mm RAL 7047 MPK0002 59Shelf, telescopic keyboard - build-in 600 - 900mm RAL 9011 MPK0002B 59Shelf, variable - 19-inch x 250 x 12mm (w x d x h) RAL 7047 MPL0010 57, 91Shelf, variable - 19-inch x 350 x 12mm (w x d x h) RAL 7047 MPL0011 57, 91Shelf, variable - 19-inch x 500 x 12mm (w x d x h) RAL 7047 MPL0012 57Shelf, variable - 19-inch x 700 x 12mm (w x d x h) RAL 7047 MPL0013 57Shelf, variable 100kg - 19-inch x 700 x 25mm (w x d x h) RAL 7047 MPL0014 58Shelf, variable 100kg - 19-inch x 700 x 25mm (w x d x h) RAL 9011 MPL0014B 58Shelf, variable 100kg - 19-inch x 800 x 25mm (w x d x h) RAL 7047 MPL0015 58Shelf, variable 100kg - 19-inch x 800 x 25mm (w x d x h) RAL 9011 MPL0015B 58Shunting comb with 4 teeth, 19-inch RAL 7047 MCM0011 47, 88Shunting comb with 4 teeth, 19-inch RAL 9011 MCM0011B 47, 88Shunting eye front mounting 1,5U - 52 x 86mm (w x d) MCM1003 43, 75Shunting eye front mounting 1U - 30 x 86mm (w x d) MCM1002 43, 75Shunting eye front mounting 2U - 84 x 86mm (w x d) MCM1004 44Shunting eye front mounting vertical - 35 x 64mm (w x d) MCM1001 43, 75Shunting eye side mounting, 19-inch - 110 x 154mm (w x d) MCM1007 44, 76Shunting eye, side, height post - 130 x 120mm (w x d) MCM1008 44Shunting eye, side, height post - 85 x 165mm (w x d) MCM1009 45Shunting eye front mounting 1,5U - 52 x 86mm (w x d) MCM0003 43, 75Shunting eye front mounting 1U - 30 x 86mm (w x d) MCM0002 43, 75,

87Shunting eye front mounting 2U - 84 x 86mm (w x d) MCM0004 44Shunting eye front mounting vertical - 35 x 64mm (w x d) MCM0001 43, 75,

87Shunting eye side mounting, 19-inch - 110 x 154mm (w x d) MCM0007 44, 76Shunting eye, side, height post - 130 x 120mm (w x d) MCM0009 45Shunting eye, side, height post - 85 x 165mm (w x d) MCM0008 44Side panel - 1000mm x 25U/45ME (d x h) RAL 7047 MSP0304 29Side panel - 1000mm x 25U/45ME (d x h) RAL 9011 MSP0304B 29Side panel - 1000mm x 41U/73ME (d x h) RAL 7047 MSP0306 29Side panel - 1000mm x 41U/73ME (d x h) RAL 9011 MSP0306B 29Side panel - 1000mm x 46U/81ME (d x h) RAL 7047 MSP0307 29Side panel - 1000mm x 46U/81ME (d x h) RAL 9011 MSP0307B 29Side panel - 1200mm x 41U/73ME (d x h) RAL 7047 MSP0406 29Side panel - 1200mm x 41U/73ME (d x h) RAL 9011 MSP0406B 29Side panel - 1200mm x 46U/81ME (d x h) RAL 7047 MSP0407 29



T

Side panel - 1200mm x 46U/81ME (d x h) RAL 9011 MSP0407B 29Side panel - 600mm x 12U/21ME (d x h) RAL 7047 MSP0001 29Side panel - 600mm x 16U/29ME (d x h) RAL 7047 MSP0002 29Side panel - 600mm x 21U/37ME (d x h) RAL 7047 MSP0003 29Side panel - 600mm x 25U/45ME (d x h) RAL 7047 MSP0004 29Side panel - 600mm x 37U/65ME (d x h) RAL 7047 MSP0005 29Side panel - 600mm x 41U/73ME (d x h) RAL 7047 MSP0006 29Side panel - 600mm x 46U/81ME (d x h) RAL 7047 MSP0007 29Side panel - 800mm x 12U/21ME (d x h) RAL 7047 MSP0101 29Side panel - 800mm x 16U/29ME (d x h) RAL 7047 MSP0102 29Side panel - 800mm x 21U/37ME (d x h) RAL 7047 MSP0103 29Side panel - 800mm x 25U/45ME (d x h) RAL 7047 MSP0104 29Side panel - 800mm x 25U/45ME (d x h) RAL 9011 MSP0104B 29Side panel - 800mm x 37U/65ME (d x h) RAL 7047 MSP0105 29Side panel - 800mm x 41U/73ME (d x h) RAL 7047 MSP0106 29Side panel - 800mm x 41U/73ME (d x h) RAL 9011 MSP0106B 29Side panel - 800mm x 46U/81ME (d x h) RAL 7047 MSP0107 29Side panel - 800mm x 46U/81ME (d x h) RAL 9011 MSP0107B 29Side panel - 900mm x 25U/45ME (d x h) RAL 7047 MSP0204 29Side panel - 900mm x 41U/73ME (d x h) RAL 7047 MSP0206 29Side panel - 900mm x 46U/81ME (d x h) RAL 7047 MSP0207 29Side panel MLR, 800mm x 42HE (d x h) MLR3411 74Side skirt seal kit - rubber -UL94 MCS0011 53Side skirt side panels - for 41U cabinets RAL 7047 MCS0016 52Side skirt side panels - for 41U cabinets RAL 9011 MCS0016B 52Side skirt side panels - for 46U cabinets RAL 7047 MCS0017 52Side skirt side panels - for 46U cabinets RAL 9011 MCS0017B 52Side skirts, 19-inch - for 41U x 800mm cabinets RAL 7047 MCS0006 52Side skirts, 19-inch - for 41U x 800mm cabinets RAL 9011 MCS0006B 52Side skirts, 19-inch - for 41U x 800mm cabinets RAL 9011 MCS0007B 52Side skirts, 19-inch - for 46U x 800mm cabinets RAL 7047 MCS0007 52Stability posts 19-inch - 600 x 1000mm (w x d) MPR0183 35Stability posts 19-inch - 600 x 1200mm (w x d) MPR0184 35Stability posts 19-inch - 600 x 600mm (w x d) MPR0180 35Stability posts 19-inch - 600 x 800mm (w x d) MPR0181 35Stability posts 19-inch - 600 x 900mm (w x d) MPR0182 35Stability posts 19-inch - 800 x 1000mm (w x d) MPR1183 35Stability posts 19-inch - 800 x 1200mm (w x d) MPR1184 35Stability posts 19-inch - 800 x 600mm (w x d) MPR1180 35Stability posts 19-inch - 800 x 800mm (w x d) MPR1181 35Stability posts 19-inch - 800 x 900mm (w x d) MPR1182 35Stiffener profile for base plate - 1000mm RAL 7047 MBM0043 17Stiffener profile for base plate - 1200mm MBM0044 17Stiffener profile for base plate - 600mm RAL 7047 MBM0040 17Stiffener profile for base plate - 800mm RAL 7047 MBM0041 17Stiffener profile for base plate - 900mm RAL 7047 MBM0042 17Support spacer 100mm MPR0050 32Swivel handle, 2-points Fix Easy lock MLK0501 28Swivel handle, 2-points Fix Easy lock MLK0502 28Swivel handle, 2-points Fix Easy lock MLK0503 28Swivel handle, 2-points Fix Easy lock, double door MLK1306 28Swivel handle, 2-points Fix Easy lock, double door MLK1307 28Swivel handle, 2-points Fix Easy lock, with combination lock MLK0531 28Swivel handle, 2-points Fix Easy lock, with combination lock MLK0532 28Swivel handle, 2-points Fix Easy lock, with combination lock MLK0533 28Swivel handle, 2-points Fix Easy lock, with combination lock, double door MLK1326 28Swivel handle, 2-points Fix Easy lock, with combination lock, double door MLK1327 28

TFT drawer 19-inch - incl. front USB port US layout MTD0001 65Telescopic cable bridge 1235-2000mm (150 mm width), RAL 7047 MCM0307 40Telescopic cable bridge 1235-2000mm (150 mm width), RAL 9011 MCM0307B 40Telescopic cable bridge 2000-3700mm (150 mm width), RAL 7047 MCM0308 40

Index


V

Telescopic cable bridge 2000-3700mm (150 mm width), RAL 9011 MCM0308B 40Telescopic cable bridge 990-1750mm (150 mm width), RAL 7047 MCM0306 40Telescopic cable bridge 990-1750mm (150 mm width), RAL 9011 MCM0306B 40Thermostat MWETF02 20, 89Thermostat MCC0300 19Third hand, MFE - assembly tool MFE0050 62Top mounting brackets 19-inch Set of 4 pieces MPR0900 33Top, 4 cut-outs, MLR - 800 x 800mm MLR3112 74Top, blank, 3 cut-outs F/R - 600 x 1000mm (w x d) RAL 7047 MRF0027 18Top, blank, 3 cut-outs F/R - 600 x 1000mm (w x d) RAL 9011 MRF0027B 18Top, blank, 3 cut-outs F/R - 600 x 1200mm (w x d) RAL 7047 MRF0030 18Top, blank, 3 cut-outs F/R - 600 x 1200mm (w x d) RAL 9011 MRF0030B 18Top, blank, 3 cut-outs F/R - 600 x 600mm (w x d) RAL 7047 MRF0017 18Top, blank, 3 cut-outs F/R - 600 x 800mm (w x d) RAL 7047 MRF0018 18Top, blank, 3 cut-outs F/R - 600 x 900mm (w x d) RAL 7047 MRF0025 18Top, blank, 3 cut-outs L/R - 800 x 600mm (w x d) RAL 7047 MRF0119 18Top, blank, 3 cut-outs L/R - 800 x 800mm (w x d) RAL 7047 MRF0120 18Top, blank, 3 cut-outs L/R - 800 x 800mm (w x d) RAL 9011 MRF0120B 18Top, blank, 4 cut-outs L/R - 800 x 1000mm (w x d) RAL 7047 MRF0028 18Top, blank, 4 cut-outs L/R - 800 x 1000mm (w x d) RAL 9011 MRF0028B 18Top, blank, 4 cut-outs L/R - 800 x 1200mm (w x d) RAL 7047 MRF0029 18Top, blank, 4 cut-outs L/R - 800 x 1200mm (w x d) RAL 9011 MRF0029B 18Top, blank, 4 cut-outs L/R - 800 x 900mm (w x d) RAL 7047 MRF0026 18Tripac, 19-inch profiles, set of 2 - 15U (h) TRI.PR.15.00 91Tripac, 19-inch profiles, set of 2 - 21U (h) TRI.PR.21.00 91Tripac, 19-inch profiles, set of 2 - 21U (h) TRI.VP.00.01 93Tripac, 19-inch profiles, set of 2 - 9U (h) TRI.PR.09.00 91Tripac, fan unit with IEC connection TRI.VE.00.02 89Tripac, wall enclosure - 600 x 500 x 1011mm/21HE (w x d x h) TRI.215015 83Tripac, wall enclosure - 600 x 500 x 478mm/9HE (w x d x h) TRI.095015 83Tripac, wall enclosure - 600 x 500 x 744mm/15HE (w x d x h) TRI.155015 83

VariControl-S 4-20mA converter MRM0116 105VariControl-S AC-voltage detector MRM0112 105VariControl-S GPRS modemfor text message alerts (only with Pro controller) MRM0042 102VariControl-S Pro controller with 8 sensor-, 20 dry-contact- and 4 extensionport MRM0020LS 102VariControl-S Pro controller with 8 sensor-, 60 dry-contact- and 4 extensionport MRM0030LS 102VariControl-S airflow sensor MRM0109 103VariControl-S controller with 2 sensorports (incl. 1 temperature sensor) MRM0001 102VariControl-S controller with 4 sensorports MRM0003 102VariControl-S controller with 8 sensor-, 20 dry-contact ports MRM0020 102VariControl-S controller with 8 sensor-, 60 dry-contact ports MRM0030 102VariControl-S controller with 8 sensorports MRM0010 102VariControl-S dry-contact sensor with 8 ports (only with Pro controller) MRM0124 104VariControl-S dry-contact sensor with fixed cable (5 m.) MRM0113 104VariControl-S humidity and temperature sensor MRM0117 103VariControl-S magnetic door switch MRM0128 104VariControl-S motion detector (PIR) MRM0110 104VariControl-S Pro controller with 8 sensor ports and 4 extension ports MRM0010LS 102VariControl-S Pro controller with 8 sensor ports, 4 USB camera ports, 2 extension ports MRM0011L 100VariControl-S rope water leakage detector (3.3 m.) MRM0127 104VariControl-S rope water leakage detector extension (3.3 m.) MRM0126 104VariControl-S sensor controlled relay MRM0114 105VariControl-S siren & strobe light MRM0119 104VariControl-S smoke detector MRM0111 104VariControl-S temperature sensor MRM0118 103VariControl-S temperature sensor (daisy chainable till 8 sensors) MRM0122 103VariControl-S temperature sensor with fixed cable (1 m.) MRM0101 103VariControl-S temperature sensor with fixed cable (2.5 m.) MRM0102 103VariControl-S water leakage detector with fixed cable (33 m.) MRM0125 104VariControl-S water leakage detector with fixed cable (4.5 m.) MRM0105 104Varicontrol-S extension controller with 16 dry-contact ports MRM0040 102



W

Varicontrol-S extension controller with 8 sensorports MRM0041 102VariControl-S universal camera (USB) MRM0130 102VariControl-S dome camera with pan/tilt controls (USB) MRM0131 102Velcro tapes (100 pieces) MCM0100 47, 88Velcro, roll - length 25m / width 16mm FDH0420 47, 88Ventilation plate 58% perforated RAL 7047 MBM1008 19Ventilation plate 58% perforated RAL 9011 MBM1008B 19

Wall mounting - 600mm (w) MRW0001 67

Index

Index by article number


D

F

M

DUO.034515 Duopac, enclosure - 530 x 450 x 207mm/3U (w x d x h) 83DUO.064515 Duopac, enclosure - 530 x 450 x 343mm/6U (w x d x h) 83DUO.094515 Duopac, enclosure - 530 x 450 x 516mm/9U (w x d x h) 83DUO.PR.03.00 Duopac, 19-inch profiles, set of 2 - 3U (h) 90DUO.PR.06.00 Duopac, 19-inch profiles, set of 2 - 6U (h) 90DUO.PR.09.00 Duopac, 19-inch profiles, set of 2 - 9U (h) 90

FDH0420 Velcro, roll - length 25m / width 16mm 47, 88

MBM0040 Stiffener profile for base plate - 600mm RAL 7047 17MBM0041 Stiffener profile for base plate - 800mm RAL 7047 17MBM0042 Stiffener profile for base plate - 900mm RAL 7047 17MBM0043 Stiffener profile for base plate - 1000mm RAL 7047 17MBM0044 Stiffener profile for base plate - 1200mm 17MBM0100 Base plate middle with 3 cut-outs - 600mm (d) RAL 7047 16MBM0101 Base plate middle with 3 cut-outs - 800mm (d) RAL 7047 16MBM0101B Base plate middle with 3 cut-outs - 800mm (d) RAL 9011 16MBM0102 Base plate middle with 3 cut-outs - 900mm (d) RAL 7047 16MBM0103 Base plate middle with 3 cut-outs - 1000mm (d) RAL 7047 16MBM0103B Base plate middle with 3 cut-outs - 1000mm (d) RAL 9011 16MBM0104 Base plate middle with 3 cut-outs - 1200mm (d) RAL 7047 16MBM0104B Base plate middle with 3 cut-outs - 1200mm (d) RAL 9011 16MBM0110 Base plate middle blank - 600mm (d) RAL 7047 16MBM0111 Base plate middle blank - 800mm (d) RAL 7047 16MBM0112 Base plate middle blank - 900mm (d) RAL 7047 16MBM0113 Base plate middle blank - 1000mm (d) RAL 7047 16MBM0114 Base plate middle blank - 1200mm (d) RAL 7047 16MBM0120 Blank part for base plate - 600mm (d) RAL 7047 17MBM0121 Blank part for base plate - 800mm (d) RAL 7047 17MBM0121B Blank part for base plate - 800mm (d) RAL 9011 17MBM0122 Blank part for base plate - 900mm (d) RAL 7047 17MBM0123 Blank part for base plate - 1000mm (d) RAL 7047 17MBM0123B Blank part for base plate - 1000mm (d) RAL 9011 17MBM0124 Blank part for base plate - 1200mm (d) RAL 7047 17MBM0124B Blank part for base plate - 1200mm (d) RAL 9011 17MBM0130 Brushes for base plate - 600mm (d) 17MBM0131 Brushes for base plate - 800mm (d) 17MBM0132 Brushes for base plate - 900mm (d) 17MBM0133 Brushes for base plate - 1000mm (d) 17MBM0134 Brushes for base plate - 1200mm (d) 17MBM1001 Cover plate RAL 7047 19MBM1001B Cover plate RAL 9011 19, 80MBM1003 Cable entry brush 19, 77MBM1008 Ventilation plate 58% perforated RAL 7047 19MBM1008B Ventilation plate 58% perforated RAL 9011 19MCC0300 Thermostat 19MCE0410 Mounting-brackets universal (set of 4) 63MCL20226010 Cabinet, co-location 2 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 8MCL20226012 Cabinet, co-location 2 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 7047 8MCL20228010 Cabinet, co-location 2 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 8MCL20228012 Cabinet, co-location 2 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 8MCL21226010 Cabinet, co-location 2 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 8MCL21226012 Cabinet, co-location 2 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 9011 8MCL21228010 Cabinet, co-location 2 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 8MCL21228012 Cabinet, co-location 2 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 8MCL40226010 Cabinet, co-location 4 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 8MCL40226012 Cabinet, co-location 4 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 7047 8MCL40228010 Cabinet, co-location 4 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 8


Description Article no. PageMCL40228012 Cabinet, co-location 4 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 8MCL41226010 Cabinet, co-location 4 sect. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 8MCL41226012 Cabinet, co-location 4 sect. - 600 x 1200 x 2200mm/46U (w x d x h) RAL 9011 8MCL41228010 Cabinet, co-location 4 sect. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 8MCL41228012 Cabinet, co-location 4 sect. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 8MCM0001 Shunting eye front mounting vertical - 35 x 64mm (w x d) 43, 75,

87MCM0002 Shunting eye front mounting 1U - 30 x 86mm (w x d) 43, 75,

87MCM0003 Shunting eye front mounting 1,5U - 52 x 86mm (w x d) 43, 75MCM0004 Shunting eye front mounting 2U - 84 x 86mm (w x d) 44MCM0007 Shunting eye side mounting, 19-inch - 110 x 154mm (w x d) 44, 76MCM0008 Shunting eye, side, height post - 85 x 165mm (w x d) 44MCM0009 Shunting eye, side, height post - 130 x 120mm (w x d) 45MCM0011 Shunting comb with 4 teeth, 19-inch RAL 7047 47, 88MCM0011B Shunting comb with 4 teeth, 19-inch RAL 9011 47, 88MCM0023 Cable guide with controlled bend radius left 45MCM0024 Cable guide with controlled bend radius right 45MCM0050 Cable trunk - 44 x 45 x 2000mm (w x d x h) 46MCM0051 Cable trunk - 86 x 65 x 2000mm (w x d x h) 46MCM0052 Cable trunk - 107 x 65 x 2000mm (w x d x h) 46MCM0053 Cable trunk - 200 x 65 x 2000mm (w x d x h) 46MCM0100 Velcro tapes (100 pieces) 47, 88MCM0101 Cable bundle straps (100 pieces) - 2,5 x 100mm (w x l) 47MCM0102 Cable bundle straps (100 pieces) - 2,5 x 360mm (w x l) 47MCM0124 Cable tray sinked - 200mm x 25U (w x h) 46MCM0126 Cable tray sinked - 200mm x 41U (w x h) 46MCM0127 Cable tray sinked - 200mm x 46U (w x h) 46MCM0134 Cable tray sinked - 300mm x 25U/45ME (w x h) 46MCM0136 Cable tray sinked - 300mm x 41U (w x h) 46MCM0137 Cable tray sinked - 300mm x 46U (w x h) 46MCM0300 Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 37MCM0300B Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 37MCM0301 Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 37MCM0301B Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 37MCM0302 Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 7047 37MCM0302B Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 9011 37MCM0303 Broad cable duct (800 mm) with partition for 800 mm wide cabinet, RAL 7047 37MCM0303B Broad cable duct (800 mm) with partition for 800 mm wide cabinet, RAL 9011 37MCM0306 Telescopic cable bridge 990-1750mm (150 mm width), RAL 7047 40MCM0306B Telescopic cable bridge 990-1750mm (150 mm width), RAL 9011 40MCM0307 Telescopic cable bridge 1235-2000mm (150 mm width), RAL 7047 40MCM0307B Telescopic cable bridge 1235-2000mm (150 mm width), RAL 9011 40MCM0308 Telescopic cable bridge 2000-3700mm (150 mm width), RAL 7047 40MCM0308B Telescopic cable bridge 2000-3700mm (150 mm width), RAL 9011 40MCM0310 Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 38MCM0310B Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 38MCM0311 Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 38MCM0311B Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 38MCM0312 Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 7047 38MCM0312B Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 9011 38MCM0313 Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 7047 38MCM0313B Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 9011 38MCM0316 Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 7047 39MCM0316B Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 9011 39MCM0317 Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 7047 39MCM0317B Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 9011 39MCM0318 Lid for narrow cable duct (200 mm) for Varicondition H2O/DX, RAL 7047 39MCM0318B Lid for narrow cable duct (200 mm) for Varicondition H2O/DX, RAL 9011 39MCM0319 Lid for broad cable duct (600 mm) for Varicondition H2O/DX, RAL 7047 39MCM0319B Lid for broad cable duct (600 mm) for Varicondition H2O/DX, RAL 9011 39MCM0320 End plate for narrow cable duct RAL 7047 38MCM0320B End plate for narrow cable duct RAL 9011 38MCM0321 End plate for broad cable duct RAL 7047 38

Index

Description Article no. PageMCM0321B End plate for broad cable duct RAL 9011 38MCM0322 Lid for cable bridge (150mm wide) 150-1700mm, RAL 7047 41MCM0322B Lid for cable bridge (150mm wide) 150-1700mm, RAL 9011 41MCM0323 Lid for cable bridge (150mm wide) 150-1030mm, RAL 7047 41MCM0323B Lid for cable bridge (150mm wide) 150-1030mm, RAL 9011 41MCM0410 Partition cable duct small (200mm) for 600mm wide cabinet, RAL 7047 37MCM0410B Partition cable duct small (200mm) for 600mm wide cabinet, RAL 9011 37MCM0412 Partition cable duct small (200mm) for 800mm wide cabinet, RAL 7047 37MCM0412B Partition cable duct small (200mm) for 800mm wide cabinet, RAL 9011 37MCM1001 Shunting eye front mounting vertical - 35 x 64mm (w x d) 43, 75MCM1002 Shunting eye front mounting 1U - 30 x 86mm (w x d) 43, 75MCM1003 Shunting eye front mounting 1,5U - 52 x 86mm (w x d) 43, 75MCM1004 Shunting eye front mounting 2U - 84 x 86mm (w x d) 44MCM1007 Shunting eye side mounting, 19-inch - 110 x 154mm (w x d) 44, 76MCM1008 Shunting eye, side, height post - 130 x 120mm (w x d) 44MCM1009 Shunting eye, side, height post - 85 x 165mm (w x d) 45MCM1111 Cable overlength cassette - 19" 48MCM2001 Cable guides 6x and mounting bracket 6U 41MCM2003 Cable guide 38x, 41U mounting profile 41MCM2004 Cable guide 76x, 41U mounting profile 41MCM2005 Cable guide 43x, 46U mounting profile 41MCM2006 Cable guide 86x, 46U mounting profile 41MCM2009 Cable guides 20x 41MCM2010 Cleats including 2U mounting plate RAL 7047 42MCM2010B Cleats including 2U mounting plate RAL 9011 42MCM2011 Cable cleat, diameter 60mm x 75mm 42MCM2014 Cable guides 10x and mounting bracket 25U 41MCM2016 Cable guides 10x and mounting bracket 41U 41MCM2017 Cable guides 10x and mounting bracket 46U 41MCM2020 Mounting bracket (4x) for the cable cleat + 4x cable cleat 42MCS0006 Side skirts, 19-inch - for 41U x 800mm cabinets RAL 7047 52MCS0006B Side skirts, 19-inch - for 41U x 800mm cabinets RAL 9011 52MCS0007 Side skirts, 19-inch - for 46U x 800mm cabinets RAL 7047 52MCS0007B Side skirts, 19-inch - for 41U x 800mm cabinets RAL 9011 52MCS0011 Side skirt seal kit - rubber -UL94 53MCS0016 Side skirt side panels - for 41U cabinets RAL 7047 52MCS0016B Side skirt side panels - for 41U cabinets RAL 9011 52MCS0017 Side skirt side panels - for 46U cabinets RAL 7047 52MCS0017B Side skirt side panels - for 46U cabinets RAL 9011 52MCS2001 Heat baffle RAL 7047 53MCS2001B Heat baffle RAL 9011 53MCS3003 Air intake valve 450 x 450mm - incl bottom plate set 1000mm RAL 7047 54MCS3003B Air intake valve 450 x 450mm - incl bottom plate set 1000mm RAL 9011 54MCS3004 Air intake valve 450 x 450mm - incl bottom plate set 1200mm RAL 7047 54MCS3004B Air intake valve 450 x 450mm - incl bottom plate set 1200mm RAL 9011 54MCS5002 Cable entry plate - 19-inch x 1,5mm x 2U (l x d x h) RAL 7047 54, 55MCS5002B Cable entry plate - 19-inch x 1,5mm x 2U (l x d x h) RAL 9011 54, 55MCS5004 Cable entry foam - 19-inch x 2U RAL 7047 54MCS5004B Cable entry foam - 19-inch x 2U RAL 9011 54MCS5005 Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 7047 54MCS5005B Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 9011 54MCS5006 Cable entry foam - 19-inch x 1U RAL 7047 55MCS5006B Cable entry foam - 19-inch x 1U RAL 9011 55MDD0006 Door, double, blank - 600mm x 41U/73ME (w x h) RAL 7047 24MDD0007 Door, double, blank - 600mm x 46U/81ME (w x h) RAL 7047 24MDD0106 Door, double, blank - 800mm x 41U/73ME (w x h) RAL 7047 24MDD0107 Door, double, blank - 800mm x 46U/81ME (w x h) RAL 7047 24MDD1016 Door, double, glass grey tinted - 600mm x 41U/73ME (w x h) RAL 7047 26MDD1017 Door, double, glass grey tinted - 600mm x 46U/81ME (w x h) RAL 7047 26MDD1116 Door, double, glass grey tinted - 800mm x 41U/73ME (w x h) RAL 7047 26MDD1117 Door, double, glass grey tinted - 800mm x 46U/81ME (w x h) RAL 7047 26MDD7006 Door, double, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 7047 25MDD7006B Door, double, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 9011 25MDD7007 Door, double, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 7047 25


Description Article no. PageMDD7007B Door, double, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 9011 25MDD7106 Door, double, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 7047 25MDD7106B Door, double, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 9011 25MDD7107 Door, double, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 7047 25MDD7107B Door, double, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 9011 25MDH0001 Document holder, A4-size, installation space 30mm 64MER0001 Earthing, earthing cables - 3x 200mm and 3x 400mm 64MER0003 Earthing, potential equalising rail 63MER0106 Earthing, earthrail copper - 20 x 5 x 1800mm/73ME (w x d x h) 64MER0107 Earthing, earthrail copper - 20 x 5 x 2000mm/81ME (w x d x h) 64MFD0001 Door, blank - 600mm x 12U/21ME (w x h) RAL 7047 20MFD0002 Door, blank - 600mm x 16U/29ME (w x h) RAL 7047 20MFD0003 Door, blank - 600mm x 21U/37ME (w x h) RAL 7047 20MFD0004 Door, blank - 600mm x 25U/45ME (w x h) RAL 7047 20MFD0005 Door, blank - 600mm x 37U/65ME (w x h) RAL 7047 20MFD0006 Door, blank - 600mm x 41U/73ME (w x h) RAL 7047 20MFD0006B Door, blank - 600mm x 41U/73ME (w x h) RAL 9011 20MFD0007 Door, blank - 600mm x 46U/81ME (w x h) RAL 7047 20MFD0007B Door, blank - 600mm x 46U/81ME (w x h) RAL 9011 20MFD0104 Door, blank - 800mm x 25U/45ME (w x h) RAL 7047 20MFD0105 Door, blank - 800mm x 37U/65ME (w x h) RAL 7047 20MFD0106 Door, blank - 800mm x 41U/73ME (w x h) RAL 7047 20MFD0106B Door, blank - 800mm x 41U/73ME (w x h) RAL 9011 20MFD0107 Door, blank - 800mm x 46U/81ME (w x h) RAL 7047 20MFD0107B Door, blank - 800mm x 46U/81ME (w x h) RAL 9011 20MFD1001 Door, glass clear - 600mm x 12U/21ME (w x h) RAL 7047 23MFD1002 Door, glass clear - 600mm x 16U/29ME (w x h) RAL 7047 23MFD1003 Door, glass clear - 600mm x 21U/37ME (w x h) RAL 7047 23MFD1004 Door, glass clear - 600mm x 25U/45ME (w x h) RAL 7047 23MFD1005 Door, glass clear - 600mm x 37U/65ME (w x h) RAL 7047 23MFD1006 Door, glass clear - 600mm x 41U/73ME (w x h) RAL 7047 23MFD1006B Door, glass clear - 600mm x 41U/73ME (w x h) RAL 9011 23MFD1007 Door, glass clear - 600mm x 46U/81ME (w x h) RAL 7047 23MFD1007B Door, glass clear - 600mm x 46U/81ME (w x h) RAL 9011 23MFD1104 Door, glass clear - 800mm x 25U/45ME (w x h) RAL 7047 23MFD1105 Door, glass clear - 800mm x 37U/65ME (w x h) RAL 7047 23MFD1106 Door, glass clear - 800mm x 41U/73ME (w x h) RAL 7047 23MFD1106B Door, glass clear - 800mm x 41U/73ME (w x h) RAL 9011 23MFD1107 Door, glass clear - 800mm x 46U/81ME (w x h) RAL 7047 23MFD1107B Door, glass clear - 800mm x 46U/81ME (w x h) RAL 9011 23MFD2001 Door, glass grey tinted - 600mm x 12U/21ME (w x h) RAL 7047 22MFD2002 Door, glass grey tinted - 600mm x 16U/29ME (w x h) RAL 7047 22MFD2003 Door, glass grey tinted - 600mm x 21U/37ME (w x h) RAL 7047 22MFD2004 Door, glass grey tinted - 600mm x 25U/45ME (w x h) RAL 7047 22MFD2005 Door, glass grey tinted - 600mm x 37U/65ME (w x h) RAL 7047 22MFD2006 Door, glass grey tinted - 600mm x 41U/73ME (w x h) RAL 7047 22MFD2007 Door, glass grey tinted - 600mm x 46U/81ME (w x h) RAL 7047 22MFD2104 Door, glass grey tinted - 800mm x 25U/45ME (w x h) RAL 7047 22MFD2105 Door, glass grey tinted - 800mm x 37U/65ME (w x h) RAL 7047 22MFD2106 Door, glass grey tinted - 800mm x 41U/73ME (w x h) RAL 7047 22MFD2107 Door, glass grey tinted - 800mm x 46U/81ME (w x h) RAL 7047 22MFD4114 Door, glass grey tinted, ventilated - 800mm x 25U/45ME (w x h) RAL 7047 24MFD4116 Door, glass grey tinted, ventilated - 800mm x 41U/73ME (w x h) RAL 7047 24MFD4117 Door, glass grey tinted, ventilated - 800mm x 46U/81ME (w x h) RAL 7047 24MFD7006 Door, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 7047 21MFD7006B Door, 80% ventilated - 600mm x 41U/73ME (w x h) RAL 9011 21MFD7007 Door, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 7047 21MFD7007B Door, 80% ventilated - 600mm x 46U/81ME (w x h) RAL 9011 21MFD7104 Door, 80% ventilated - 800mm x 25U/45ME (w x h) RAL 7047 21MFD7104B Door, 80% ventilated - 800mm x 25U/45ME (w x h) RAL 9011 21MFD7106 Door, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 7047 21MFD7106B Door, 80% ventilated - 800mm x 41U/73ME (w x h) RAL 9011 21MFD7107 Door, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 7047 21MFD7107B Door, 80% ventilated - 800mm x 46U/81ME (w x h) RAL 9011 21

Index

Description Article no. PageMFE0001 Shelf, MFE - 19-inch x 250 x 18,5mm (w x d x h) RAL 7047 57MFE0002 Shelf, MFE - 19-inch x 350 x 18,5mm (w x d x h) RAL 7047 57MFE0003 Shelf, MFE - 19-inch x 500 x 18,5mm (w x d x h) RAL 7047 57MFE0003B Blank part for base plate - 800mm (d) RAL 9011 57MFE0004 Shelf, MFE - 19-inch x 650 x 18,5mm (w x d x h) RAL 7047 57MFE0004B Shelf, MFE - 19-inch x 650 x 18,5mm (w x d x h) RAL 9011 57MFE0020 Shelf, MFE - fixing clips, set of 4 pieces 57MFE0050 Third hand, MFE - assembly tool 62MFE0101 Front panel, MFE - 19-inch x 1mm x 1U (w x d x h) RAL 7047 49MFE0101B Front panel, MFE - 19-inch x 1mm x 1U (w x d x h) RAL 9011 49MFE0102 Front panel, MFE - 19-inch x 1mm x 2U (w x d x h) RAL 7047 49MFE0102B Front panel, MFE - 19-inch x 1mm x 2U (w x d x h) RAL 9011 49MFE0103 Front panel, MFE - 19-inch x 1mm x 3U (w x d x h) RAL 7047 49MFE0103B Front panel, MFE - 19-inch x 1mm x 3U (w x d x h) RAL 9011 49MFE0104 Front panel, MFE - 19-inch x 1mm x 6U (w x d x h) RAL 7047 49MFE0104B Front panel, MFE - 19-inch x 1mm x 6U (w x d x h) RAL 9011 49MFE0105 Front panel, MFE - 19-inch x 1mm x 9U (w x d x h) RAL 7047 49MFE0105B Front panel, MFE - 19-inch x 1mm x 9U (w x d x h) RAL 9011 49MFE0111 Front panel, MFE - set of 6x MFE0101 RAL 7047 50MFE0111B Front panel, MFE - set of 6x MFE0101B RAL 9011 50MFE0112 Front panel, MFE - set of 6x MFE0102 RAL 7047 50MFE0112B Front panel, MFE - set of 6x MFE0102B RAL 9011 50MFE0113 Front panel, MFE - set of 6x MFE0103 RAL 7047 50MFE0113B Front panel, MFE - set of 6x MFE0103B RAL 9011 50MFE0114 Front panel, MFE - set of 4x MFE0104 RAL 7047 50MFE0114B Front panel, MFE - set of 4x MFE0104B RAL 9011 50MFE1105 Minkels 1U front panel, plastic RAL9005, 25 pieces 51MFE1120 Mix of frontpanels, 240 U in total RAL 7047 51MFE1120B Mix of frontpanels, 240 U in total RAL 9011 51MFM0001 Cage nut M5 - (20 pieces) 61, 92MFM0002 Cage nut M5 - (100 pieces) 61MFM0003 Cage nut M6 - (20 pieces) 61, 92MFM0004 Cage nut M6 - (100 pieces) 61MFM0010 Screws, decorative, with washer (black) M5 - (20 pieces) 62, 92MFM0011 Screws, decorative, with washer (black) M5 - (100 pieces) 62MFM0012 Screws, decorative, with washer (black) M6 - (20 pieces) 62, 92MFM0013 Screws, decorative, with washer (black) M6 - (100 pieces) 62MFM0050 Baying set RAL 7047 63MFM0051 Baying set external RAL 7047 63MFM0052 Baying set external RAL 9011 63MFM0053 Baying set internal 63MFM0054 Baying set RAL 9011 63MFR0001 Door seal, rubber - 12U/21ME 27MFR0002 Door seal, rubber - 16U/29ME 27MFR0003 Door seal, rubber - 21U/37ME 27MFR0004 Door seal, rubber - 25U/45ME 27MFR0005 Door seal, rubber - 37U/65ME 27MFR0006 Door seal, rubber - 41U/73ME 27MFR0007 Door seal, rubber - 46U/81ME 27MLK0501 Swivel handle, 2-points Fix Easy lock 28MLK0502 Swivel handle, 2-points Fix Easy lock 28MLK0503 Swivel handle, 2-points Fix Easy lock 28MLK0521 Cylinder, 2-points Fix Easy lock 28MLK0522 Cylinder, 2-points Fix Easy lock 28MLK0523 Cylinder, 2-points Fix Easy lock 28MLK0531 Swivel handle, 2-points Fix Easy lock, with combination lock 28MLK0532 Swivel handle, 2-points Fix Easy lock, with combination lock 28MLK0533 Swivel handle, 2-points Fix Easy lock, with combination lock 28MLK1306 Swivel handle, 2-points Fix Easy lock, double door 28MLK1307 Swivel handle, 2-points Fix Easy lock, double door 28MLK1326 Swivel handle, 2-points Fix Easy lock, with combination lock, double door 28MLK1327 Swivel handle, 2-points Fix Easy lock, with combination lock, double door 28MLK9001 Lock, blind stop for swivel handle 29MLK9003 Lock, for swivel handle, EK-333 29


Description Article no. PageMLK9004 Lock, wilka lock for swivel handle 29MLR0111 Rack, MLR - base frame, 542 x 740 x 2000mm 42HE (b x d x h) 71MLR1111 Rack, MLR - baying rack, 800 x 800 x 2000mm 42HE (b x d x h) 70MLR2111 Rack, MLR - stand alone rack, 800 x 800 x 2000mm 42HE (b x d x h) 70MLR3112 Top, 4 cut-outs, MLR - 800 x 800mm 74MLR3211 Door MLR, single, blind - 800 x 42HE (w x h) 73MLR3311 Door MLR, single, glass - 800 x 42HE (w x h) 73MLR3411 Side panel MLR, 800mm x 42HE (d x h) 74MLR4101 Corner guide rails MLR 1 HE, 2 pieces - 300mm 80MLR4201 Baying kit MLR external, LANRack-LANRack baying 79MLR4202 Baying kit MLR external, open frame-open frame baying 79MLR4203 Baying kit MLR external, LANRack-Varicon M baying 79MLR4301 Cable tray sendzimir MLR - 300mm x 42HE 76MLR4401 Earthing, cable set Varicon-LAN-Rack 79MLR4501 Cable entry brush for base plate - 800mm 76MLS0005 Door switch 65MPA0003 Shelf, cable guide for telescopic shelf 60MPA0010 Shelf, stiffener rib for full size shelves - 500mm (d) 61MPA0011 Shelf, stiffener rib for full size shelves - 700mm (d) 61MPK0001 Shelf, telescopic keyboard - build-in 400 - 700mm RAL 7047 59MPK0002 Shelf, telescopic keyboard - build-in 600 - 900mm RAL 7047 59MPK0002B Shelf, telescopic keyboard - build-in 600 - 900mm RAL 9011 59MPL0010 Shelf, variable - 19-inch x 250 x 12mm (w x d x h) RAL 7047 57, 91MPL0011 Shelf, variable - 19-inch x 350 x 12mm (w x d x h) RAL 7047 57, 91MPL0012 Shelf, variable - 19-inch x 500 x 12mm (w x d x h) RAL 7047 57MPL0013 Shelf, variable - 19-inch x 700 x 12mm (w x d x h) RAL 7047 57MPL0014 Shelf, variable 100kg - 19-inch x 700 x 25mm (w x d x h) RAL 7047 58MPL0014B Shelf, variable 100kg - 19-inch x 700 x 25mm (w x d x h) RAL 9011 58MPL0015 Shelf, variable 100kg - 19-inch x 800 x 25mm (w x d x h) RAL 7047 58MPL0015B Shelf, variable 100kg - 19-inch x 800 x 25mm (w x d x h) RAL 9011 58MPL0111 Shelf, telescopic - 19-inch x 350 x 55mm (w x d x h) RAL 7047 58, 91MPL0112 Shelf, telescopic - 19-inch x 500 x 55mm (w x d x h) RAL 7047 58MPL0113 Shelf, telescopic - 19-inch x 700 x 55mm (w x d x h) RAL 7047 58MPL0311 Shelf, cantilever - 19-inch x 250mm x 2U (w x d x h) RAL 7047 59, 91MPL0312 Shelf, cantilever - 19-inch x 350mm x 2U (w x d x h) RAL 7047 59, 91MPL0312B Shelf, cantilever - 19-inch x 350mm x 2U (w x d x h) RAL 9011 59MPL0411 Shelf, full size fixed - 600 x 600mm (w x d) RAL 7047 60MPL0412 Shelf, full size fixed - 600 x 800mm (w x d) RAL 7047 60MPL0511 Shelf, full size fixed - 800 x 600mm (w x d) RAL 7047 60MPL0512 Shelf, full size fixed - 800 x 800mm (w x d) RAL 7047 60MPM0001 Mounting- air closure plate 19” for max. 17’’ TFT monitor, RAL 9011, 8U 66MPR0050 Support spacer 100mm 32MPR0060 Profiles, number strip for 19-inch profile 46U (h) 32MPR0061 Profiles, number strip for metric profile 81ME (h) 32MPR0100 Mounting width post - 600mm (w) 36MPR0101 Mounting width post - 800mm (w) 36MPR0150 Mounting depth post - 600mm (d) 36MPR0151 Mounting depth post - 800mm (d) 36MPR0152 Mounting depth post - 900mm (d) 36MPR0153 Mounting depth post - 1000mm (d) 36MPR0154 Mounting depth post - 1200mm (d) 36MPR0160 Depth post frame for 19-inch profiles - 600mm (d) 32MPR0161 Depth post frame for 19-inch profiles - 800mm (d) 32MPR0162 Depth post frame for 19-inch profiles - 900mm (d) 32MPR0163 Depth post frame for 19-inch profiles - 1000mm (d) 32MPR0164 Depth post frame for 19-inch profiles - 1200mm (d) 32MPR0170 Depth post for divided 19-inch - 600 x 600mm (w x d) 34MPR0171 Depth post for divided 19-inch - 600 x 800mm (w x d) 34MPR0172 Depth post for divided 19-inch - 600 x 900mm (w x d) 34MPR0173 Depth post for divided 19-inch - 600 x 1000mm (w x d) 34MPR0180 Stability posts 19-inch - 600 x 600mm (w x d) 35MPR0181 Stability posts 19-inch - 600 x 800mm (w x d) 35MPR0182 Stability posts 19-inch - 600 x 900mm (w x d) 35MPR0183 Stability posts 19-inch - 600 x 1000mm (w x d) 35

Index

Description Article no. PageMPR0184 Stability posts 19-inch - 600 x 1200mm (w x d) 35MPR0190 Depth post frame for 19-inch profiles (2x) - 600mm (d) 32MPR0191 Depth post frame for 19-inch profiles (2x) - 800mm (d) 32MPR0192 Depth post frame for 19-inch profiles (2x) - 900mm (d) 32MPR0193 Depth post frame for 19-inch profiles (2x) - 1000mm (d) 32MPR0194 Depth post frame for 19-inch profiles (2x) (2x) - 1200mm (d) 32MPR0251 Pull relief, adjustable 35MPR0311 Corner guide rails 1U (set) - build-in 300 - 450mm 66MPR0312 Corner guide rails 1U (set) - build-in 450 - 750mm 66MPR0313 Corner guide rails 1U (set) - build-in 740 - 1050mm 66MPR0601 Flat profiles, 19-inch, set of 2 - 12U/21ME (h) 31MPR0602 Flat profiles, 19-inch, set of 2 - 16U/29ME (h) 31MPR0603 Flat profiles, 19-inch, set of 2 - 21U/37ME (h) 31MPR0604 Flat profiles, 19-inch, set of 2 - 25U/45ME (h) 31MPR0605 Flat profiles, 19-inch, set of 2 - 37U/65ME (h) 31MPR0606 Flat profiles, 19-inch, set of 2 - 41U/73ME (h) 31MPR0607 Flat profiles, 19-inch, set of 2 - 46U/81ME (h) 31MPR0704 Flat profiles, 19-inch, set of 2 - 25U/45ME (h) with angle brackets on top 33MPR0705 Flat profiles, 19-inch, set of 2 - 37U/65ME (h) with angle brackets on top 33MPR0706 Flat profiles, 19-inch, set of 2 - 41U/73ME (h) with angle brackets on top 33MPR0707 Flat profiles, 19-inch, set of 2 - 46U/81ME (h) with angle brackets on top 33MPR0900 Top mounting brackets 19-inch Set of 4 pieces 33MPR1001 Profiles, metric, set of 2 - 21ME (h) 31MPR1002 Profiles, metric, set of 2 - 29ME (h) 31MPR1003 Profiles, metric, set of 2 - 37ME (h) 31MPR1004 Profiles, metric, set of 2 - 45ME (h) 31MPR1005 Profiles, metric, set of 2 - 65ME (h) 31MPR1006 Profiles, metric, set of 2 - 73ME (h) 31MPR1007 Profiles, metric, set of 2 - 81ME (h) 31MPR1170 Depth post for divided 19-inch - 800 x 600mm (w x d) 34MPR1171 Depth post for divided 19-inch - 800 x 800mm (w x d) 34MPR1172 Depth post for divided 19-inch - 800 x 900mm (w x d) 34MPR1173 Depth post for divided 19-inch - 800 x 1000mm (w x d) 34MPR1174 Depth post for divided 19-inch - 800 x 1200mm (w x d) 34MPR1180 Stability posts 19-inch - 800 x 600mm (w x d) 35MPR1181 Stability posts 19-inch - 800 x 800mm (w x d) 35MPR1182 Stability posts 19-inch - 800 x 900mm (w x d) 35MPR1183 Stability posts 19-inch - 800 x 1000mm (w x d) 35MPR1184 Stability posts 19-inch - 800 x 1200mm (w x d) 35MPS0095 Power strip aluminium, mounting set compact 110MPS0096 Power strip aluminium Mounting set compact double 110MPS0097 Power strip aluminium, mounting set 110MPS0099 Mounting set for two power strips besides each other 110MPS5002 Power strip aluminium, IEC-320, 12-head 108MPS5003 Power strip aluminium, IEC-320, 16-head 108MPS5013 Power strip alu, IEC-320 with CEE-form input, 19-inch mounting, 18-sockets 108MPS5014 Power strip alu, IEC-320 with CEE-form input, 19-inch mounting, 12-sockets 108MPS5015 Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19 108MPS5115 Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19, current meter 113MPS6001 Connecting cable SCHUKO/UTE -> GST 18/3, length 3m 112MPS6003 Connecting cable CEE 1ph 16a GST 18/3, length 3m 112MPS6004 Connecting cable GST 18/3, length 0,5m, 1,5 mm2 112MPS6005 Connecting cable GST 18/3, length 2m, 2,5 mm2 112MPS6006 Connecting cable GST 18/3, length 3m, 2,5 mm2 112MPS6007 Power strip CEE-form 16A 3ph 3*(2*GST-18F + 1*C19) 111MPS6009 Power strip CEE-form 32A 1ph 2*(GST-18F + C19 +fuse+ampmeter) 111MPS6010 Power strip 4*GST-18F + 4*C19 111MPS6011 Power strip 12*C13 + GST-18 M en F 111MPS6012 Power strip 8*SCHUKO + GST-18 M en F 111MPS6013 Power strip PDU 8* UTE + GST-18 M en F 111MPS6016 Modulaire PDU 6*C13 metered and switchable per socket + GST-18F 111MPS6017 Modulaire PDU 4*GST-18F + 3*C19 metered 111MPS6022 SNMP communications agent for power- (2x) and environmental monitoring (4x) 111MPS7001 Power strip aluminium, 1-phase, 32A, 8xC13 109


Description Article no. PageMPS7002 Power strip aluminium, 1-phase, 32A, 18xC13 and 4xC19 109MPS7003 Power strip aluminium, 1-phase, 32A, 24xC13 109MPS7102 Power strip aluminium, 1-phase, 32A, 18xC13 and 4xC19, current meter 113MPS8001 Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19 109MPS8002 Power strip aluminium, 3-phase, 16A, 12xC13 109MPS8101 Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19, current meter 113MPS9001 Power strip aluminium, 3-phase, 32A, 18xC13 and 6xC19 110MPS9101 Power strip aluminium, 3-phase, 32A, 18xC13 and 6xC19, current meter 113MRF0017 Top, blank, 3 cut-outs F/R - 600 x 600mm (w x d) RAL 7047 18MRF0018 Top, blank, 3 cut-outs F/R - 600 x 800mm (w x d) RAL 7047 18MRF0025 Top, blank, 3 cut-outs F/R - 600 x 900mm (w x d) RAL 7047 18MRF0026 Top, blank, 4 cut-outs L/R - 800 x 900mm (w x d) RAL 7047 18MRF0027 Top, blank, 3 cut-outs F/R - 600 x 1000mm (w x d) RAL 7047 18MRF0027B Top, blank, 3 cut-outs F/R - 600 x 1000mm (w x d) RAL 9011 18MRF0028 Top, blank, 4 cut-outs L/R - 800 x 1000mm (w x d) RAL 7047 18MRF0028B Top, blank, 4 cut-outs L/R - 800 x 1000mm (w x d) RAL 9011 18MRF0029 Top, blank, 4 cut-outs L/R - 800 x 1200mm (w x d) RAL 7047 18MRF0029B Top, blank, 4 cut-outs L/R - 800 x 1200mm (w x d) RAL 9011 18MRF0030 Top, blank, 3 cut-outs F/R - 600 x 1200mm (w x d) RAL 7047 18MRF0030B Top, blank, 3 cut-outs F/R - 600 x 1200mm (w x d) RAL 9011 18MRF0119 Top, blank, 3 cut-outs L/R - 800 x 600mm (w x d) RAL 7047 18MRF0120 Top, blank, 3 cut-outs L/R - 800 x 800mm (w x d) RAL 7047 18MRF0120B Top, blank, 3 cut-outs L/R - 800 x 800mm (w x d) RAL 9011 18MRM0001 VariControl-S controller with 2 sensorports (incl. 1 temperature sensor) 102MRM0003 VariControl-S controller with 4 sensorports 102MRM0010 VariControl-S controller with 8 sensorports 102MRM0010LS VariControl-S Pro controller with 8 sensor ports and 4 extension ports 102MRM0011L VariControl-S Pro controller with 8 sensor ports, 4 USB camera ports, 2 extension ports 100MRM0020 VariControl-S controller with 8 sensor-, 20 dry-contact ports 102MRM0020LS VariControl-S Pro controller with 8 sensor-, 20 dry-contact- and 4 extensionport 102MRM0030 VariControl-S controller with 8 sensor-, 60 dry-contact ports 102MRM0030LS VariControl-S Pro controller with 8 sensor-, 60 dry-contact- and 4 extensionport 102MRM0040 Varicontrol-S extension controller with 16 dry-contact ports 102MRM0041 Varicontrol-S extension controller with 8 sensorports 102MRM0042 VariControl-S GPRS modemfor text message alerts (only with Pro controller) 102MRM0101 VariControl-S temperature sensor with fixed cable (1 m.) 103MRM0102 VariControl-S temperature sensor with fixed cable (2.5 m.) 103MRM0105 VariControl-S water leakage detector with fixed cable (4.5 m.) 104MRM0109 VariControl-S airflow sensor 103MRM0110 VariControl-S motion detector (PIR) 104MRM0111 VariControl-S smoke detector 104MRM0112 VariControl-S AC-voltage detector 105MRM0113 VariControl-S dry-contact sensor with fixed cable (5 m.) 104MRM0114 VariControl-S sensor controlled relay 105MRM0116 VariControl-S 4-20mA converter 105MRM0117 VariControl-S humidity and temperature sensor 103MRM0118 VariControl-S temperature sensor 103MRM0119 VariControl-S siren & strobe light 104MRM0122 VariControl-S temperature sensor (daisy chainable till 8 sensors) 103MRM0124 VariControl-S dry-contact sensor with 8 ports (only with Pro controller) 104MRM0125 VariControl-S water leakage detector with fixed cable (33 m.) 104MRM0126 VariControl-S rope water leakage detector extension (3.3 m.) 104MRM0127 VariControl-S rope water leakage detector (3.3 m.) 104MRM0128 VariControl-S magnetic door switch 104MRM0130 VariControl-S universal camera (USB) 102MRM0131 VariControl-S dome camera with pan/tilt controls (USB) 102MRP0001 Rear panel - 600mm x 12U/21ME (w x h) RAL 7047 26MRP0002 Rear panel - 600mm x 16U/29ME (w x h) RAL 7047 26MRP0003 Rear panel - 600mm x 21U/37ME (w x h) RAL 7047 26MRP0004 Rear panel - 600mm x 25U/45ME (w x h) RAL 7047 26MRP0005 Rear panel - 600mm x 37U/65ME (w x h) RAL 7047 26MRP0006 Rear panel - 600mm x 41U/73ME (w x h) RAL 7047 26MRP0007 Rear panel - 600mm x 46U/81ME (w x h) RAL 7047 26MRP0104 Rear panel - 800mm x 25U/45ME (w x h) RAL 7047 26

Index

Description Article no. PageMRP0105 Rear panel - 800mm x 37U/65ME (w x h) RAL 7047 26MRP0106 Rear panel - 800mm x 41U/73ME (w x h) RAL 7047 26MRP0107 Rear panel - 800mm x 46U/81ME (w x h) RAL 7047 26MRW0001 Wall mounting - 600mm (w) 67MSA0001 Locking mechanism internal left - 600mm (d) 30MSA0002 Locking mechanism internal right - 600mm (d) 30MSA0101 Locking mechanism internal left - 800mm (d) 30MSA0102 Locking mechanism internal right - 800mm (d) 30MSA0201 Locking mechanism internal left - 900mm (d) 30MSA0202 Locking mechanism internal right - 900mm (d) 30MSA0301 Locking mechanism internal left - 1000mm (d) 30MSA0302 Locking mechanism internal right - 1000mm (d) 30MSM1001 Base legs, adjustable, set of 4 11, 86MSM1101 Plinth 25mm front/rear, blank - 600mm (w) RAL 7047 12MSM1101B Plinth 25mm front/rear, blank - 600mm (w) RAL 9011 12MSM1102 Plinth 25mm front/rear, perforated - 600mm (w) RAL 7047 12MSM1102B Plinth 25mm front/rear, perforated - 600mm (w) RAL 9011 12MSM1103 Plinth 25mm side, blank - 600mm (d) RAL 7047 13MSM1201 Plinth 25mm front/rear, blank - 800mm (w) RAL 7047 12MSM1201B Plinth 25mm front/rear, blank - 800mm (w) AG2RAL 9011 12MSM1202 Plinth 25mm front/rear, perforated - 800mm (w) RAL 7047 12MSM1202B Plinth 25mm front/rear, perforated - 800mm (w) RAL 9011 12MSM1203 Plinth 25mm side, blank - 800mm (d) RAL 7047 13MSM1203B Plinth 25mm side, blank - 800mm (d) RAL 9011 13MSM1303 Plinth 25mm side, blank - 900mm (d) RAL 7047 13MSM1403 Plinth 25mm side, blank - 1000mm (d) RAL 7047 13MSM1403B Plinth 25mm side, blank - 1000mm (d) RAL 9011 13MSM1503 Plinth 25mm side, blank - 1200mm (d) RAL 7047 13MSM1503B Plinth 25mm side, blank - 1200mm (d) RAL 9011 13MSM2001 Base legs, extended, set of 4 - 100mm (h) 11MSM2101 Plinth 100mm front/rear, blank - 600mm (w) RAL 7047 13MSM2101B Plinth 100mm front/rear, blank - 600mm (w) RAL 9011 13MSM2102 Plinth 100mm front/rear, perforated - 600mm (w) RAL 7047 13MSM2102B Plinth 100mm front/rear, perforated - 600mm (w) RAL 9011 13MSM2103 Plinth 100mm side, blank - 600mm (d) RAL 7047 14MSM2104 Plinth 100mm side, perforated - 600mm (d) RAL 7047 14MSM2201 Plinth 100mm front/rear, blank - 800mm (w) RAL 7047 13MSM2201B Plinth 100mm front/rear, blank - 800mm (w) RAL 9011 13MSM2202 Plinth 100mm front/rear, perforated - 800mm (w) RAL 7047 13MSM2202B Plinth 100mm front/rear, perforated - 800mm (w) RAL 9011 13MSM2203 Plinth 100mm side, blank - 800mm (d) RAL 7047 14MSM2203B Plinth 100mm side, blank - 800mm (d) RAL 9011 14MSM2204 Plinth 100mm side, perforated - 800mm (d) RAL 7047 14MSM2204B Plinth 100mm side, perforated - 800mm (d) RAL 9011 14MSM2301 Filter set for plinths - 600mm (w) 13MSM2302 Filter set for plinths - 800mm (w) 13MSM2403 Plinth 100mm side, blank - 900mm (d) 14MSM2503 Plinth 100mm side, blank - 1000mm (d) 14MSM2503B Plinth 100mm side, blank - 1000mm (d) RAL 9011 14MSM2504 Plinth 100mm side, perforated - 1000mm (d) RAL 7047 14MSM2504B Plinth 100mm side, perforated - 1000mm (d) RAL 9011 14MSM2603 Plinth 100mm side, blank - 1200mm (d) RAL 7047 14MSM2603B Plinth 100mm side, blank - 1200mm (d) RAL 9011 14MSM2604 Plinth 100mm side, perforated - 1200mm (d) RAL 7047 14MSM2604B Plinth 100mm side, perforated - 1200mm (d) RAL 9011 14MSM3001 Castors, set of 4 castors without brakes 12MSM3002 Castors, set of 2 castors with brakes and 2 castors without brakes 12MSM3101 Plinth front/rear (in combination with castors) - 600mm (w) RAL 7047 14MSM3103 Plinth side (in combination with castors) - 600mm (d) RAL 7047 15MSM3201 Plinth front/rear (in combination with castors) - 800mm (w) RAL 7047 14MSM3203 Plinth side (in combination with castors) - 800mm (d) RAL 7047 15MSM3303 Plinth side (in combination with castors) - 900mm (d) RAL 7047 15MSM3403 Plinth side (in combination with castors) - 1000mm (d) RAL 7047 15MSM4100 Floor fixation set- 1 point 15



T

MSP0001 Side panel - 600mm x 12U/21ME (d x h) RAL 7047 29MSP0002 Side panel - 600mm x 16U/29ME (d x h) RAL 7047 29MSP0003 Side panel - 600mm x 21U/37ME (d x h) RAL 7047 29MSP0004 Side panel - 600mm x 25U/45ME (d x h) RAL 7047 29MSP0005 Side panel - 600mm x 37U/65ME (d x h) RAL 7047 29MSP0006 Side panel - 600mm x 41U/73ME (d x h) RAL 7047 29MSP0007 Side panel - 600mm x 46U/81ME (d x h) RAL 7047 29MSP0101 Side panel - 800mm x 12U/21ME (d x h) RAL 7047 29MSP0102 Side panel - 800mm x 16U/29ME (d x h) RAL 7047 29MSP0103 Side panel - 800mm x 21U/37ME (d x h) RAL 7047 29MSP0104 Side panel - 800mm x 25U/45ME (d x h) RAL 7047 29MSP0104B Side panel - 800mm x 25U/45ME (d x h) RAL 9011 29MSP0105 Side panel - 800mm x 37U/65ME (d x h) RAL 7047 29MSP0106 Side panel - 800mm x 41U/73ME (d x h) RAL 7047 29MSP0106B Side panel - 800mm x 41U/73ME (d x h) RAL 9011 29MSP0107 Side panel - 800mm x 46U/81ME (d x h) RAL 7047 29MSP0107B Side panel - 800mm x 46U/81ME (d x h) RAL 9011 29MSP0199 Cylinder lock 30MSP0204 Side panel - 900mm x 25U/45ME (d x h) RAL 7047 29MSP0206 Side panel - 900mm x 41U/73ME (d x h) RAL 7047 29MSP0207 Side panel - 900mm x 46U/81ME (d x h) RAL 7047 29MSP0304 Side panel - 1000mm x 25U/45ME (d x h) RAL 7047 29MSP0304B Side panel - 1000mm x 25U/45ME (d x h) RAL 9011 29MSP0306 Side panel - 1000mm x 41U/73ME (d x h) RAL 7047 29MSP0306B Side panel - 1000mm x 41U/73ME (d x h) RAL 9011 29MSP0307 Side panel - 1000mm x 46U/81ME (d x h) RAL 7047 29MSP0307B Side panel - 1000mm x 46U/81ME (d x h) RAL 9011 29MSP0406 Side panel - 1200mm x 41U/73ME (d x h) RAL 7047 29MSP0406B Side panel - 1200mm x 41U/73ME (d x h) RAL 9011 29MSP0407 Side panel - 1200mm x 46U/81ME (d x h) RAL 7047 29MSP0407B Side panel - 1200mm x 46U/81ME (d x h) RAL 9011 29MTD0001 TFT drawer 19-inch - incl. front USB port US layout 65MWE06425G MWE, wall enclosure - 600 x 425 x 342mm/6HE (w x d x h) 82MWE06525G MWE, wall enclosure - 600 x 525 x 342mm/6HE (w x d x h) 82MWE09525G MWE, wall enclosure - 600 x 525 x 476mm/9HE (w x d x h) 82MWE09625G MWE, wall enclosure - 600 x 625 x 476mm/9HE (w x d x h) 82MWE12525G MWE, wall enclosure - 600 x 525 x 609mm/12HE (w x d x h) 82MWE12625G MWE, wall enclosure - 600 x 625 x 609mm/12HE (w x d x h) 82MWE15525G MWE, wall enclosure - 600 x 525 x 742mm/15HE (w x d x h) 82MWE15625G MWE, wall enclosure - 600 x 625 x 742mm/15HE (w x d x h) 82MWE21625G MWE, wall enclosure - 600 x 625 x 1009mm/21HE (w x d x h) 82MWECB01 MWE, cable entry brush 88MWECM01 MWE, cable ring 19-inch mounted 87MWECS01 MWE, corner guide rails, set of 2 - 1U (h) 92MWEMD06 MWE, door, metal, powder coated - 6U (h) 85MWEMD09 MWE, door, metal, powder coated - 9U (h) 85MWEMD12 MWE, door, metal, powder coated - 12U (h) 85MWEMD15 MWE, door, metal, powder coated - 15U (h) 85MWEMD21 MWE, door, metal, powder coated - 21U (h) 85MWEPR06 MWE, 19-inch profiles, set of 2 - 6U (h) 90MWEPR09 MWE, 19-inch profiles, set of 2 - 9U (h) 90MWEPR12 MWE, 19-inch profiles, set of 2 - 12U (h) 90MWEPR15 MWE, 19-inch profiles, set of 2 - 15U (h) 90MWEPR21 MWE, 19-inch profiles, set of 2 - 21U (h) 90MWETF02 Thermostat 20, 89MWETN01 Click fasteners for power strip mounting 92MWEXS01 Mounting material, plate screws, 22 pieces 92

TRI.095015 Tripac, wall enclosure - 600 x 500 x 478mm/9HE (w x d x h) 83TRI.155015 Tripac, wall enclosure - 600 x 500 x 744mm/15HE (w x d x h) 83TRI.215015 Tripac, wall enclosure - 600 x 500 x 1011mm/21HE (w x d x h) 83TRI.KA.00.01 Cable entry brushes for Duopac and Tripac 93

Index


V

TRI.PR.09.00 Tripac, 19-inch profiles, set of 2 - 9U (h) 91TRI.PR.15.00 Tripac, 19-inch profiles, set of 2 - 15U (h) 91TRI.PR.21.00 Tripac, 19-inch profiles, set of 2 - 21U (h) 91TRI.VE.00.02 Tripac, fan unit with IEC connection 89TRI.VP.00.01 Tripac, 19-inch profiles, set of 2 - 21U (h) 93

VMA0104 Accessory package copper basic, 1300mm/25U/45ME 7VMA0106 Accessory package copper basic, 2000mm/41U/73ME 7VMA0107 Accessory package copper basic, 2200mm/46U/81ME 7VMA0134 Accessory package copper plus, 1300mm/25U/45ME 7VMA0136 Accessory package copper plus, 2000mm/41U/73ME 7VMA0137 Accessory package copper plus, 2200mm/46U/81ME 7VMA0204 Accessory package fiber basic, 1300mm/25U/45ME 7VMA0206 Accessory package fiber basic, 2000mm/41U/73ME 7VMA0207 Accessory package fiber basic, 2200mm/46U/81ME 7VMA0234 Accessory package fiber plus, 1300mm/25U/45ME 7VMA0236 Accessory package fiber plus, 2000mm/41U/73ME 7VMA0237 Accessory package fiber plus, 2200mm/46U/81ME 7VME138010S Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 7047 5VME138010SB Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 9011 5VME138080S Cabinet, server, pre-ass. - 800 x 1000 x 1300mm/25U (w x d x h) RAL 7047 5VME138080SB Cabinet, server, pre-ass. - 800 x 800 x 1300mm/25U (w x d x h) RAL 9011 5VME206010C Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 7047 4VME206010CB Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 9011 4VME206010S Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 7047 4VME206010SB Cabinet, server, pre-ass. - 600 x 1000 x 2000mm/41U (w x d x h) RAL 9011 4VME208010C Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 7047 5VME208010CB Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 9011 5VME208010S Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 7047 5VME208010SB Cabinet, server, pre-ass. - 800 x 1000 x 2000mm/41U (w x d x h) RAL 9011 5VME208012C Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 5VME208012CB Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 9011 5VME208012S Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 7047 5VME208012SB Cabinet, server, pre-ass. - 800 x 1200 x 2000mm/41U (w x d x h) RAL 9011 5VME208080C Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 5VME208080CB Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 9011 5VME208080S Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 7047 5VME208080SB Cabinet, server, pre-ass. - 800 x 800 x 2000mm/41U (w x d x h) RAL 9011 5VME226010C Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 4VME226010CB Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 4VME226010S Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 7047 4VME226010SB Cabinet, server, pre-ass. - 600 x 1000 x 2200mm/46U (w x d x h) RAL 9011 4VME228010C Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 5VME228010CB Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 5VME228010S Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 7047 5VME228010SB Cabinet, server, pre-ass. - 800 x 1000 x 2200mm/46U (w x d x h) RAL 9011 5VME228012C Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 5VME228012CB Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 5VME228012S Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 7047 5VME228012SB Cabinet, server, pre-ass. - 800 x 1200 x 2200mm/46U (w x d x h) RAL 9011 5VME228080C Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 7047 5VME228080CB Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 9011 5VME228080S Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 7047 5VME228080SB Cabinet, server, pre-ass. - 800 x 800 x 2200mm/46U (w x d x h) RAL 9011 5VMF076060 Frame - 600 x 600 x 700mm/12U/21ME (w x d x h) RAL 7047 10VMF076080 Frame - 600 x 800 x 700mm/12U/21ME (w x d x h) RAL 7047 10VMF096060 Frame - 600 x 600 x 900mm/16U/29ME (w x d x h) RAL 7047 10VMF096080 Frame - 600 x 800 x 900mm/16U/29ME (w x d x h) RAL 7047 10VMF116060 Frame - 600 x 600 x 1100mm/21U/37ME (w x d x h) RAL 7047 10VMF116080 Frame - 600 x 800 x 1100mm/21U/37ME (w x d x h) RAL 7047 10VMF1360100 Frame - 600 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF136060 Frame - 600 x 600 x 1300mm/25U/45ME (w x d x h) RAL 7047 10


Description Article no. PageVMF136080 Frame - 600 x 800 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF136090 Frame - 600 x 900 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF1380100 Frame - 800 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF1380100B Frame - 800 x 1000 x 1300mm/25U/45ME (w x d x h) RAL 9011 10VMF138060 Frame - 800 x 600 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF138080 Frame - 800 x 800 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF138080B Frame - 800 x 800 x 1300mm/25U/45ME (w x d x h) RAL 9011 10VMF138090 Frame - 800 x 900 x 1300mm/25U/45ME (w x d x h) RAL 7047 10VMF186060 Frame - 600 x 600 x 1800mm/37U/65ME (w x d x h) RAL 7047 10VMF186080 Frame - 600 x 800 x 1800mm/37U/65ME (w x d x h) RAL 7047 10VMF188060 Frame - 800 x 600 x 1800mm/37U/65ME (w x d x h) RAL 7047 10VMF188080 Frame - 800 x 800 x 1800mm/37U/65ME (w x d x h) RAL 7047 10VMF206010 Extension kit, 100mm, for frame 41U/73MU - 600mm (w) RAL 7047 27VMF2060100 Frame - 600 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF2060100B Frame - 600 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 9011 10VMF2060120 Frame - 600 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF2060120B Frame - 600 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 9011 10VMF206060 Frame - 600 x 600 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF206080 Frame - 600 x 800 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF206090 Frame - 600 x 900 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF208010 Extension kit, 100mm, for frame 41U/73MU - 800mm (w) RAL 7047 27VMF2080100 Frame - 800 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF2080100B Frame - 800 x 1000 x 2000mm/41U/73ME (w x d x h) RAL 9011 10VMF2080120 Frame - 800 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF2080120B Frame - 800 x 1200 x 2000mm/41U/73ME (w x d x h) RAL 9011 10VMF208060 Frame - 800 x 600 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF208080 Frame - 800 x 800 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF208080B Frame - 800 x 800 x 2000mm/41U/73ME (w x d x h) RAL 9011 10VMF208090 Frame - 800 x 900 x 2000mm/41U/73ME (w x d x h) RAL 7047 10VMF226010 Extension kit, 100mm, for frame 46U/81MU - 600mm (w) RAL 7047 27VMF2260100 Frame - 600 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF2260100B Frame - 600 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 9011 10VMF2260120 Frame - 600 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF2260120B Frame - 600 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 9011 10VMF226060 Frame - 600 x 600 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF226080 Frame - 600 x 800 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF226090 Frame - 600 x 900 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF228010 Extension kit, 100mm, for frame 46U/81MU - 800mm (w) RAL 7047 27VMF2280100 Frame - 800 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF2280100B Frame - 800 x 1000 x 2200mm/46U/81ME (w x d x h) RAL 9011 10VMF2280120 Frame - 800 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF2280120B Frame - 800 x 1200 x 2200mm/46U/81ME (w x d x h) RAL 9011 10VMF228060 Frame - 800 x 600 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF228080 Frame - 800 x 800 x 2200mm/46U/81ME (w x d x h) RAL 7047 10VMF228080B Frame - 800 x 800 x 2200mm/46U/81ME (w x d x h) RAL 9011 10VMF228090 Frame - 800 x 900 x 2200mm/46U/81ME (w x d x h) RAL 7047 10

catalogue 2012-2013

Documents

standalone racks

location racks varicon

perforated baying type

widethe universal server

ral colours

baying kit vme206010c41

baying kit vme206010cb46

baying kit vme226010c46