catalogo completo da apollo 2011

7/29/2019 Catalogo Completo Da Apollo 2011

1/144

Fire detectionequipment

Product Ca

t al ogue2011


2/144

Apollo Fire Detectors Ltd. has specialised in the design and manuacture

o high quality ire detection products since 1980. In that time, the

company has broadened its capability rom a straightorward ocus on

conventional ire detectors to include the manuacture o sophisticated

analogue addressable detectors and interaces or monitoring and

controlling equipment in ire protection systems.

Apollo applies the most modern production techniques and has invested

in sophisticated manuacturing equipment to ensure consistent high

quality products and ast response to customer requirements. Through

planned expansion, Apollo has reached a leading position in the marketor proessional ire detectors and exports over hal o its production

to countries around the world. In 2007, Apollo unveiled a new brand

identity, urther cementing its position as a world class ire solutions

provider.

Based in Havant, Hampshire, Apollo operates rom one site. All

departments - Research and Development, Sales and Marketing,

Manuacturing and Finance are located here.

Apollo is a Halma company. Halma is a holding company or over 40

subsidiaries worldwide, all engaged in specialist engineering activities.

* The Product Lietime Guarantee is subject to terms and conditions. For urther inormation,please reer to our current General Conditions o Sale.

Why Choose Apollo? Largest independent smoke detector

manuacturer in the world

Certified to all key international approvals

Product Lifetime Guarantee*

The best people work for Apollo

Trustworthy, integrity & supportive

Localised customer service worldwide

Ex stock delivery

100% reliability, 100% tested

Open, digital protocol

Forwards and backwards product compatibility

World Class Fire Solutions

Apollo - The Partner o Choice


3/144

Inormation in this catalogue is given in good aith, but Apollo Fire Detectors cannotbe held responsible or any omissions or errors. The company reserves the right tochange speciications o products at any time without prior notice.

Contents

10Analogue AddessableDiscovery, XP95

41Wireless TechnologyXPander

46Flush Mounted TechnologyPlateau

84Manual Call Points

107ULXP95A, Series 65A, Discovery UL

123Test Equipment and Maintenance

25ConventionalOrbis, Series 65

59Audio Visual SignallingSounders, Beacons, Sounder Beacons,Sounder Beacon Bases

91MarineDiscovery, Orbis

49Specialist DetectorsFlame, Beam & Duct Detectors

87Mounting Accessories

35Two-Wire TechnologyAlarmSense

77InteracesIsolated, Mini, DIN-Rail

100Intrinsically SaeXP95, Orbis

How do Detectors Work? ..........4

New Products ............................6

Additional Services ....................8

Approvals ..............................126

Index .....................................133

By Appointment toHer Majesty The Queen

Manuacturers o Fire Detection& Alarm Products

Apollo Fire Detectors LimitedHampshire


4/144

How Do They Work?

4

How do Detectors Work?

Optical (photo-electric) smoke detector

Optical smoke detectors incorporate a pulsing infra-red LED

located in a chamber within the housing o the detector. The

chamber is designed to exclude light rom any external source.

At an angle to the LED is a photo-diode which normally does

not register the column of light emitted by the LED. In the

event o smoke rom a ire entering the chamber, the light

pulse from the LED will be scattered and hence registered bythe photo-diode. I the photo-diode sees smoke on the two

ollowing pulses, the detector changes into alarm state and the

indicator LED lights up. The detector housing is identical to

that of the ionisation detector but has an indicator LED which

is clear in quiescent state but produces red light in alarm.

Optical smoke detectors respond particularly well to

slow-burning (smouldering) fires. They are widely used

for life protection.

Multisensor detector

A multisensor detector is basically an optical smoke detector -

so it will respond well to smouldering ires. The addition o a

heat sensing element allows the multisensor to give a response

to ast burning (laming) ires which is comparable to that o

an ionisation detector.

Multisensor detectors are general purpose detectors

which respond well to a wide range of fires.

Ionisation smoke detector

The sensing part o the detector consists o two chambers - anopen, outer chamber and a semi-sealed reerence chamber

within. Mounted in the reerence chamber is a low activity

radioactive oil o Americium 241 which enables current to

low between the inner and outer chambers when the detector

is powered up. As smoke enters the detector, particles

become attached to the ions, causing a reduction in current

low in the outer chamber and hence an increase in voltage

measured at the junction between the two chambers. The

voltage increase is monitored by the electronic circuitry which

triggers the detector into the alarm state at a preset threshold.

An externally visible red LED lights up when the detector

changes to alarm state.Ionisation smoke detectors are good specialist detectors

which respond well to fast-burning (flaming) fires and are

now used to overcome specialist problems.

Integrating ionisation smoke detector

This type o detector works on the same principles as the

ionisation smoke detector, but has modiied signal processing

circuitry which allows an alarm threshold to be present or up

to 20 seconds without initiating an alarm.

This type o detector is suitable or use in areas where

transient high levels o smoke may be expected.

Photo-diode

Infra-red LED

Thermistorexposed to air

Multisensor detector

+

Apollo Fire Detectors Limited 2001/JDR

+

+

+

++

+ +

+

+

+

++

+ +

In clean air With smoke0 volts

Sensing chamber

Sensingelectrodes

Referencechamber

Radioactivefoil

10 volts onfoil holder

Negatively charged ion

Positively charged ion

Smoke particle

+

Ionisation smoke chamber

Apollo Fire Detectors Limited 1997/RHD/JDR

In clean air With smoke

Photo-diode

Infra-red LED

Optical smoke chamber

Light beamDiffused light beam

Smoke particle

Apollo Fire Detectors 1997/RHD


5/144

How Do They Work?

5

Integrating effect in analogue addressable systems

In XP95 systems, the integrating eect can be mimicked in

both ionisation and optical smoke detectors by adjusting the

control equipment sotware to cause an appropriate delay.

Discovery smoke detectors should be set to Mode Two or

Mode Four to achieve this eect.

Carbon Monoxide (CO) detector

Carbon Monoxide (CO) is a poisonous gas produced by

combustion and a CO fire detector is used to indicate theoutbreak of a fire by sensing the level of CO in the air. The

detector has an electrochemical cell which senses CO, but

not smoke or other combustion products. The cells do not

require much power, so the detector can be made electrically

compatible with ordinary smoke and heat detectors. Apollo

manufacturers a CO detector as part of the Discovery range.

CO detectors are particularly good at detecting deep-

seated, smouldering fires.

Heat detector

Most conventional heat detectors operate by using a matchedpair of thermistors to sense heat. One thermistor is exposed

to the ambient temperature, the other is sealed. In normal

conditions the two thermistors register similar temperatures,

but, on the development o a ire, the temperature recorded

by the exposed thermistor will increase rapidly, resulting in an

imbalance o the thermistors, causing the detector to change

into alarm state. Rate-o-rise detectors are designed to detect

a ire as the temperature increases, but they also have a ixed

upper limit at which the detector will go into alarm i the

rate o temperature increase has been too slow to trigger the

detector earlier.

The Series 65 and AlarmSense CS (static response) heat

detectors have only one thermistor. They change to the alarm

state at a preset temperature.

Externally, the heat detectors are distinguishable from the

smoke detectors by having wide openings to the surrounding

atmosphere to allow good movement o air around the

external thermistor.

A heat detector may be more appropriate than a smoke

detector where the environment is dirty or smoky under

normal conditions. It must be recognised, however, that

any heat detector will respond only when a fire is wellestablished and generating a high heat output.

Intelligent reflective beam detector

Intelligent relective beam detectors comprise a single unit

which houses a transmitter, a receiver and the control

electronics. When a ire develops, smoke particles obstruct

the beam o light and, once a pre-set threshold has been

exceeded, the detector will go into alarm.

Beam detectors are designed to protect large

open spaces such as atria, museums, churches and

warehouses.

Flame detector

A lame detector is designed to detect either ultraviolet (UV)

or inra-red (IR) radiation emitted by a ire. The XP95 Dual IR

lame detector is sensitive to low-requency, lickering inra-red

radiation. This means that the detector can operate even i the

lens is contaminated by a layer o oil, dust, water vapour or ice.

Flame detectors are effective in protecting areas where

flaming fires may be expected.

Normal Conditions Rate-of-rise response Fixed temperature response

Thermistorpartiallysealed fromsurroundingair

Thermistorexposed to air

Fire detected on fastincrease of ambient

temperature

Fire detected onslowincrease of ambient

temperature

Note: Analogue addressable heat detectors use only a single thermistor

Dual thermistor heat detection

Apollo Fire Detectors Limited 1997/RHD/JDR


6/144

New Products

6

Apollo prides itself on being a leader

in product innovation. Providing fire

solutions that meet the demands of our

customers is the main pillar of Apollos

product development programme. We are

constantly working with our customers todevelop new products to meet their needs.

A further commitment to Apollos customer

focus has seen the Marketing team be

strengthened by the introduction of three

new product management roles. These

dedicated personnel will be responsible for

the future direction of the portfolio as well

as the internal management of the ranges.

A prime responsibility of the new roles is

continuation of customer focused product

development within Apollo and continuing

to be the Partner of Choice.

If you have any comments or suggestions

on any new or existing products, feel free

to email [email protected]

NewProducts


7/1447

New Products

7

New products or 2011Plateau

Plateau is a major advance in ire detector

design, providing eective detection withminimum intrusion. The Plateau smoke

detector, when installed, is a very slim

device. It is ideal or use in installations

where it is impractical or undesirable to

use a standard smoke detector. For more

inormation, please see page 47.

XPander updates

XPander, Apollos range o wireless

ire detectors, has been upgraded with

new sotware or its Loop Interace. This

increases the number o devices each

interace can support rom 15 up to 31. In

addition, an Input/Output unit has been

added to the range which can be used

or controlling ire doors, ire dampers,

smoke vents and other ire engineering

applications. For more inormation, please

see page 41.

AlarmSense AV

The two-wire AlarmSense range has been

enhanced with the introduction o threeopen-area signalling devices. New or

2011 are the Open-Area Sounder, Open-

Area Beacon and Open-Area Sounder

Beacon. Originally designed to meet

the requirements o Houses in Multiple

Occupation (HMOs), AlarmSense is

suitable or use in small to medium

applications. AlarmSense devices are

designed to be connected to the same pair

o supply wires, which reduces cabling

costs and installation time. For more


Base mounted flame detectors Marine

and Standard

The Apollo range o base mounted lame

detectors have been designed to provide

rapid detection o all types o lames. There

is a choice o detection methods to guard

against unwanted alse alarms. For more


Discovery Open-Area Sounder Beacon

The Discovery Open-Area Sounder Beacon

makes ull use o the Discovery protocol andhas been designed or use in indoor open

areas and outdoors. Tones can be used or

other purposes in addition to the warning o

ire, ideal or schools and there is a sot start

option, ideal or hospitals and nursing homes.

For more inormation, please see page 66.

Discovery Marine Sounder Beacon Base

Apollos Discovery Marine Sounder Beacon

Base has been approved or use in marine

applications. The device makes ull use o the

Discovery protocol and when the ire system

is being commissioned a magnetic wand

can be used to adjust and test each sounder

locally. For more inormation, please see

page 95.

Marine approved DIN-rails

New or 2011 are a range o our marine

approved DIN-rail interaces Marine DIN-

rail 8 Ampere Sounder Controller, Marine

DIN-rail Dual Isolator, Marine DIN-rail

Switch Monitor Plus and Marine DIN-railZone Monitor. The interaces are compatible

with Apollo XP95 and Discovery protocols

and have ABS and MED approval. For more


UL approved AV products

Apollo now oers a range o UL listed loop

powered Audio Visual signaling devices.

Open Area and Base version products are

oered in both the XP95 and Discovery

ranges. These products do not require a

separate power source to unction and

thereore provide a cost eective solution

with added eatures and intelligence or audio

visual notiication installations. The Discovery

devices incorporate extra eatures, such as

panel controlled volume and tone settings.

The Sounder Beacon bases are available in

two types, with yellow or red flashing LEDs.

Coming soon Voice Sounder

Discovery CO/Heat Multisensor detector UL listed pull station

Marine Isolating Base


8/144

Additional Services

8

Servicing and Disposal

Apollo oers a Service acility or Apollo detectors and ancillary products,

such as interaces and manual call points. This means that older models

o Apollo detectors can be serviced (subject to them being within their

recommended working lie).

The ollowing services are oered:

Detectors can be cleaned and recalibrated so that they work within the

same limits as newly manuactured detectors.

Manual call points and XP95 interfaces can be cleaned and tested to

ensure that they are still unctioning within manuacturing limits.

Equipment which is found to be beyond economical repair (BER) or is

older than its recommended working lie can be disposed o - a small

charge is made or this service to cover the cost o investigation and

disposal.

Loop Calculator

The Apollo Loop Calculator is a ree computer programme

used to establish the viability o a design. It enables engineers to

calculate the total loop loading in a proposed Discovery or XP95

ire detection system by inputting relevant variables, or example

control equipment, loop devices and cable length and type. Parameters

are included or Apollo protocol compatible panels. Please see the Apollo

website or more details

www.apollo-fire.co.uk/loop-calc

Product Lifetime Guarantee

We guarantee all our products in accordance with our

recommended working lie o the product, which or detectors

we would recommend 10 years (for CO detectors, 5 years),

giving you the assurance o the quality and reliability o both our

products and our service. The Product Lietime Guarantee is subject to terms

and conditions. For urther inormation, please reer to our current General

Conditions o Sale.

Additional

Services


9/144

Additional Services

9

SimSystem

SimSystem (29600-164) is a tool or simulating loops o detectors and interaces

in order to demonstrate a system and prove the design without having to

connect actual products to a control panel. SimSystem consists o a sotware

programme which eatures an intuitive graphical display and an interace which

runs up to our loops. A maximum o two interaces can be connected, thus

allowing a system o up to eight loops to be simulated.

Training

Apollo oers a series o ree one-day training courses or its customers. The

courses cover the ollowing modules:

Module 1: Detection Principles & Device Selection

Module 1.1: Carbon Monoxide Fire Detection

Module 2: Conventional Detector Operation

Module 2.1: AlarmSense

Module 2.2: Orbis

Module 3: Analogue Addressable Principles

Module 3.1: XP95

Module 3.2: Discovery

Module 3.3: XPlorer

Module 3.4: AV Alarm Devices

Module 3.5: XPander

Module 4: Intrinsically Safe Equipment

Module 5: Service, Test & Maintenance

In addition to the standard training courses, Apollo can oer tailor-made

courses i required. The majority o courses are held at Apollos head oice, but

on-site training is also available.

You can ind out more about Apollos training days and book your place byvisiting www.apollo-fire.co.uk/training

CPD Seminars

Apollo now oers training seminars that will count towards your Continuing

Proessional Development. These ree sessions on ire industry-related topics allow

you to stay up to date.

False Alarm Reduction in Automatic Fire Detection Systems - the

Manufacturers Contribution

Independent Certification /EU Construction Products Directive for Fire Products

To ind out more email [email protected] or visit www.apollo-ire.co.uk


10/14410

Apollo oers two ranges o analogue addressable

systems - Discovery and XP95. Discovery is

Apollos high-speciication range and oers the

ollowing advantages over XP95:

Five operating modes, each EN54 approved

to provide the widest possible ire detection

solution

Automatic drit compensation where the

detector automatically compensates or the

build up o contamination, maintaining a

stable alarm threshold

Access to a more advanced range o eatures

in Discovery audio visual equipment

There are two types o analogue addressable

system those with distributed intelligence andthose with centralised intelligence.

In systems with distributed intelligence the

detectors incorporate processors which can

determine whether alarm levels o smoke or heat

exist and can initiate action accordingly.

Detectors in systems with centralised intelligence

monitor the air around them or smoke or heat

and transmit the data to the control panel on

interrogation. The processor in the panel compares

the values with stored values and determines

whether a pre-alarm or alarm should be signalled.

The advantages o distributed intelligence are local

adaptation to environment and reduction o traic

on the supply and data wires. The advantage o

centralised intelligence is the ability to upgrade a

system very quickly and easily by upgrading the

control panel.

Analogue

AddressableFire Detection


11/144

Analogue Addressable Fire Detection : Discovery

11

Discovery is a range o high-speciication, analogue

addressable ire detectors. Discovery detectors oer reliable

detection and alse alarm management by a combination

of EN54 approved operating modes and sophisticated

algorithms. Discovery has a distributed intelligence system

where decisions are made in the detector head as well as atthe control panel. Drit compensation is also incorporated

into the detector, allowing it to adapt to dirty or dusty

environments, which reduces alse alarms.

Each detector in the Discovery range can operate in one of five response modes,

which can be selected rom the control panel or hand held programmer. The

response characteristics have been careully set so that the detectors comply with the

requirements of the relevant part of EN54 in all response modes. Mode One will give

a higher sensitivity to ire than Mode Five.

Designed or use in medium to large applications with speciic system requirements,

Discovery gives you total reassurance in installations where adaptability to changing

conditions and protection against unwanted alarms is paramount.

Discoveryanalogue addressable re detection

Key features of Discovery include:

Five EN54 approved operating modes

Automatic drift compensation to ensureconstant sensitivity

Advanced feature for audio visualdevices

Rejection of transient signals

Flashing LED option

Four bytes of non-volatile memory foruser data

Alarm flag for fast alarm reporting

Conventional alarm facility during controlpanel processor fault

360 visibility in alarm

Compatible with XP95 systems

Insect Resistant

For UL listed Discovery devices

please turn to page 108


12/144


12

Discovery Optical Smoke Detector

The Discovery Optical Smoke Detector worksusing the light scatter principle and is ideal or applications

where slow-burning or smouldering ires are likely.

Responds well to slow-burning,smouldering ires

Well suited or bedrooms and escape routes

Unaffected by wind or atmospheric

pressure Remote test feature58000-600 Discovery Optical Smoke Detector

Discovery Multisensor Detector

The Discovery Multisensor Detector comprises opticalsmoke and thermistor temperature sensors who give both

a combined signal as well as a separate heat signal orimproved alse alarm management.

Ideal for a wide range of applications

Enhanced false alarm management

Well suited for environments such ashotel bedrooms

Unaffected by wind or atmosphericpressure

Well suited for sensitive environments Heat only, optical only options

Remote test feature

58000-700 Discovery Multisensor Detector

Please check the Apollo website on a regular basis or up-to-date approvals inormation.

Discovery Carbon Monoxide Detector

The Discovery Carbon Monoxide (CO) Detector is good at

detecting deep-seated fires. Please note that CO detectorsdo not detect smoke particles or heat and are not universal

replacements or smoke detectors.

Enhanced detection capability

Ideal for smouldering fires

Less susceptible to false alarms causedby steam than smoke alarms

Five response modes

Remote test feature58000-300 Discovery Carbon Monoxide Detector

Discovery Ionisation Smoke Detector

The Discovery Ionisation Smoke Detector uses

a low activity radioactive oil to detect ires by irradiatingthe air in the smoke chambers and causing a current low.

I smoke enters the chamber, the current low is reduced

leading to an alarm.

Responds well to ast-burning, lamingires

Designed to operate in a variety ofenvironments

Remote test feature

58000-500 Discovery Ionisation Smoke Detector


13/144


13


Discovery Heat Detector

The Discovery Heat Detector, distinguishable by the lowairlow resistant case, uses a single thermistor to sense the

air temperature around the detector.

Ideal in environments that are dirty orsmoky under normal conditions

Well suited for warehouses, loadingbays and car parks


Remote test feature

58000-400 Discovery Heat Detector

Intelligent Deep Base

The Intelligent Deep Base is a mounting base or Discoveryproducts which has an increased depth which allows or

cables to be inserted into the side o the product.

Enables surface wiring

45681-209 Intelligent Deep Base

Intelligent Mounting Base

All detectors in the Discovery range it the IntelligentMounting Base. The Mounting Base is a low insertion orce

base with stainless steel contacts or the detector terminals.XPERT cards are supplied with all bases.

XPERT addressing

One way fit

Locking feature to preventunauthorised removal

45681-210 Intelligent Mounting Base

Isolating BaseThe Isolating Base senses and detects short-circuit aults onDiscovery loops and spurs.

The equivalent of up to 20 smokedetectors may be installed betweenisolating bases

High brightness LED45681-284 Isolating Base

Isolator

The Isolator is placed at intervals on the loop and ensures

that, in the case o a short-circuit, only the section betweenthe isolators will be aected. When the short-circuit is

removed, the isolators automatically restore power and datato the isolated section.

Detects wiring short circuits

Minimises disruption from short-circuits

Automatic de-isolation on short-circuit removal

The equivalent of up to 20 smokedetectors may be installed betweenisolators

55000-720 Isolator

*Uses 45681-211 Isolator Base


14/144


14

Product Name Part Number Page No.

MOUNTING ACCESSORIES 87

Backplate 45681-233 88

Base Cover 45681-380 88

Conduit Box 45681-204 83

Sounder Ceiling Plate 45681-311 88

Module Base 38531-822 88

Deckhead Mounting Box 45681-217 89

Deckhead Mounting Box Kit 45681-218 89

Metal Deckhead Mounting Box PG16 29600-131 89

Ancillary devices available for the Discovery range:


Isolator Base

The Isolator Base is unique and designed to only accept theIsolator 55000-720.

Only accepts 55000-720 isolators

45681-211 Isolator Base

Intelligent Heater Base

The Intelligent Heater Base is designed to be used in coldclimates where environmental conditions could result in

either icing or condensation aecting the operation odetectors. It is recommended that the heater base be used

in conjunction with either a Waterproo Base Cover orDeckhead Mounting Box to minimise moisture ingress.

Raises the ambient temperature of adetector chamber by approximately10C

Limits the risks or potential for losseso unctionality o detectors installedin these conditions.

45681-219 Intelligent Heater Base45681-519 Waterproo Base Cover

45681-217 Deckhead Mounting Box

Intelligent Low Power Relay Base

The Low Power Relay Base incorporates a low power relay

to control ield equipment. Gives a set of voltage free contacts

controlled by the remote output o adetector

Draws negligible current

Capable of switching up to 30V at 1A45681-242 Intelligent Low Power Relay Base

MiniDisc Remote Indicator

The MiniDisc Remote Indicator is a light-weight, compactred LED indicator for use in fire protection systems.

Can be used across the entire Apollorange

Small and discrete

Anti-tamper screw to protect againstunauthorised removal

53832-070 MiniDisc Remote Indicator


15/144


15


Metal Deckhead Mounting Box M20 29600-139 89

Deckhead Adaptor PG16-M20 27249-005 89

Detector Ceiling Tile Mounting Box 45681-309 89

Sounder Ceiling Tile Mounting Box 45681-310 89Beacon Enclosure 29600-318 89

DIN-Rail Interface Enclosure (4 units) 29600-239 89


1.5mm Hexagonal Driver 29600-095 90

MANUAL CALL POINTS 84

Discovery Manual Call Point Red (Surace) 58100-910 85

Discovery Manual Call Point with Isolator Red (Surace) 58100-908 85

Discovery Manual Call Point White 58100-926 85

Discovery Manual Call Point Yellow 58100-927 85

Discovery Manual Call Point Blue 58100-928 85

Discovery Manual Call Point Green 58100-929 85

Transparent Hinged Cover 26729-152 86

Weatherproo Manual Call Point Red 58100-950 85

Weatherproo Manual Call Point Red with Isolator 58100-951 85

Waterproo Manual Call Point Yellow with Isolator 58100-953 85

STANDARD INTERFACES 78

Input/Output Unit 55000-847 79

Three Channel Input/Output Unit 55000-588 79

Output Unit 55000-849 79

Sounder Control Unit 55000-852 79

Switch Monitor 55000-843 79

Switch Monitor Plus 55000-841 80

Zone Monitor 55000-845 80

MINI INTERFACES 83

Mini Switch Monitor 55000-760 83

DIN-RAIL INTERFACES 81

DIN-Rail Sounder Controller (5 Amperes) 55000-182 82

DIN-Rail Input/Output Unit 55000-803 82

DIN-Rail Output Unit 55000-804 82

DIN-Rail Switch Monitor 55000-822 82

DIN-Rail Switch Monitor Plus 55000-821 83

DIN-Rail Zone Monitor with Isolator 55000-812 83

DIN-Rail Dual Isolator 55000-802 83

DIN-Rail Mains I/O 55000-797 82

AUDIO VISUAL SIGNALLING 59

Discovery Sounder Beacon Base 45681-393 74

Intelligent Open-Area Sounder Red 55000-001 61

Intelligent Open-Area Sounder White 55000-002 61

100dB (A) Open-Area Sounder Red 55000-278 61

100dB (A) Open-Area Sounder White 55000-279 61

100dB (A) Open-Area Weatherproof Sounder Red 55000-274 61

100dB (A) Open-Area Weatherproof Sounder White 55000-275 61

Integrated Base Sounder 45681-278 70Integrated Base Sounder with Isolator 45681-277 69


16/14416


16


Integrated Base Sounder Slow Whoop 45681-291 70

Integrated Base Sounder Slow Whoop with Isolator 45681-290 69

Integrated Base Sounder DIN-Tone with Isolator 45681-300 69

White Cap 45681-292 69Red Cap 45681-293 69

Ancillary Base Sounder 45681-276 69

Intelligent Open-Area Beacon Red Lens 55000-009 64

Intelligent Open-Area Beacon Clear Lens 55000-010 64

Loop-Powered Beacon Red 55000-877 64

Loop-Powered Beacon Amber 55000-879 64

Loop-Powered Beacon Clear Lens/Red Flash 55000-878 64

Beacon Enclosure 29600-318 89

Loop-Powered Beacon Base with Isolator 45681-333 72

Loop-Powered Beacon Base with Standard Flash 45681-335 72

Loop-Powered Beacon Base with Australian Flash 45681-337 72

Intelligent Open-Area Sounder Beacon Red Lens 55000-005 66

Intelligent Open-Area Sounder Beacon Clear Lens 55000-006 66

Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-293 66

Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-294 66

Multi-Tone Open-Area Sounder Beacon Red 55000-291 67

Multi-Tone Open-Area Sounder Beacon White 55000-292 67

Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-298 66

Weatherproof Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-299 66

Weatherproof Multi-Tone Open-Area Sounder Beacon Red 55000-296 67

Weatherproof Multi-Tone Open-Area Sounder Beacon White 55000-297 67

Sounder Beacon Base with Isolator 45681-330 74

Sounder Beacon Base 45681-331 74

Sounder Beacon Base with Australian Tone 45681-336 74

Sounder Beacon Base with Isolator DIN-Tone 45681-334 74

Sounder Beacon Base with NZ Tone 45681-338 74

Sounder Beacon Base Slow Whoop with Isolator 45681-332 74

Magnetic Wand 29650-001 76

Discovery Sounder Beacon (open areas) 58000-005 66

Discovery Sounder Beacon (open areas) 58000-007 66


17/14417

Analogue Addressable Fire Detection : XP95

17

The XP95 range o analogue addressable ire detectors is

advanced in design, improved in perormance and has

unique eatures that beneit the installer and end user.

The range eatures smoke detectors (optical and ionisation), standard and high

temperature heat detectors and a multisensor. Beam detectors, lame detectors,

manual call points, audio visual signalling devices, interace units and isolators

complete the range. XP95 has a central intelligence system where all the decisions

are made by the control panel.

Apollo has always used an open, digital protocol since 1986 and has ensured

backward compatibility when developing new products. An open protocol allows

reedom o choice or the ire system speciier, installer and end user. A system using a

digital protocol is also much less susceptible to corruption than an analogue protocol

and is thereore oten preerred in a system which is lie critical. XP95 is suitable or

medium to large applications with simple installation requirements.

XP95analogue addressable ire detection

Key features of XP95 include:

Alarm Flag for fast alarm reporting

Alarm Address for fast location of

alarm

XPERT card addressing

Electronics-free base

Easy installation

Elegant design

Insect Resistant


18/144


18

XP95 Ionisation Smoke Detector

The XP95 Ionisation Smoke Detector uses a low activityradioactive oil to detect ires by irradiating the air in the

smoke chambers and causing a current low. I smokeenters the chamber, the current low is reduced leading to

an alarm.

Responds well to fast-burning, flamingires


Minimal effects from temperature,humidity, atmospheric pressure

Well protected againstelectromagnetic intererence over awide requency range

55000-500 XP95 Ionisation Smoke Detector

55000-560 XP95 Ionisation Smoke Detector (Black)55000-520 XP95 Ionisation Smoke Detector (VdS)

XP95 Heat Detector

The XP95 Heat Detector monitors temperature by using

a single thermistor which provides a count outputproportional to the external air temperature. The XP95

range eatures two heat detectors, standard and hightemperature. The standard heat detector is classiied asan A2S device and will report an alarm at 55C. The high

temperature detector, classiied as a CS device, will reportan alarm at 90C.

Ideal in environments that are dirty orsmoky under normal conditions

Well suited for warehouses, loadingbays and car parks


55000-400 XP95 Heat Detector A2S55000-420 XP95 Heat Detector A2S (VdS)

55000-401 XP95 Heat Detector CS

XP95 Optical Smoke Detector

The XP95 Optical Smoke Detector works using the lightscatter principle and is ideal or applications where slow-

burning or smouldering ires are likely.


Well suited for bedrooms and escaperoutes

Unaffected by wind or atmosphericpressure55000-600 XP95 Optical Smoke Detector55000-660 XP95 Optical Smoke Detector (Black)

55000-620 XP95 Optical Smoke Detector (VdS)

XP95 Multisensor Detector

The XP95 Multisensor Detector contains an optical smoke

sensor and a thermistor temperature sensor whose outputsare combined to give the inal analogue value.

Sensitive to a wide range of fires

Well suited for environments such ashotel bedrooms

Unaffected by wind or atmosphericpressure55000-885 XP95 Multisensor Detector

Intelligent Mounting Base

All detectors in the XP95 range it the Intelligent MountingBase. The Mounting Base is a low insertion orce base with

stainless steel contacts for the detector terminals. XPERTcards are supplied with all bases.

XPERT addressing

One way fit of detector

Locking eature to preventunauthorised removal

45681-210 Intelligent Mounting Base

45681-361 Intelligent Mounting Base (Black)



19/144


19

Isolating Base

The new style Isolating Base senses and detects short-circuitaults on XP95 loops and spurs.

The equivalent of up to 20 smokedetectors may be installed betweenisolating bases

High brightness LED45681-284 Isolating Base

Isolator

The Isolator is placed at intervals on the loop and ensures

that, in the case o a short-circuit, only the section betweenthe isolators will be aected. When the short-circuit isremoved, the isolators automatically restore power and data

to the isolated section.

Detects wiring short circuits usingpatented technology

Minimises disruption from short-circuits

Automatic de-isolation on short-circuit removal

The equivalent of up to 20 smokedetectors may be installed betweenisolators

55000-720 Isolator*Uses 45681-211 Isolator Base

Isolator Base

The Isolator Base is unique and designed to only accept the

Isolator 55000-720. Only accepts isolators

45681-211 Isolator Base

Intelligent Low Power Relay Base

The Low Power Relay Base incorporates a low power relayto control ield equipment.

Gives a set of voltage free contactscontrolled by the remote output o adetector

Draws negligible current

Capable of switching up to 30V at 1A45681-242 Intelligent Low Power Relay Base

Intelligent Deep BaseThe Intelligent Deep Base is a mounting base or XP95products which has an increased depth which allows orcables to be inserted into the side o the product.


45681-209 Intelligent Deep Base



20/144


20

Ancillary devices available for the XP95 range:




Base Cover 45681-380 88Conduit Box 45681-204 88






Deckhead Adaptor PG16-M20 27249-005 89


Sounder Ceiling Tile Mounting Box 45681-310 89




Series 90 to XP95 Base Adaptor 45681-238 90


MANUAL CALL POINTS 84

XP95 Manual Call Point Red (Surace) 55100-905 85

XP95 Manual Call Point with Isolator Red (Surace) 55100-908 85

Weatherproo Manual Call Point Red 58100-950 85

Weatherproo Manual Call Point Red with Isolator 58100-951 85

Waterproo Manual Call Point Yellow with Isolator 58100-953 85

Transparent Hinged Cover 26729-152 86

Intelligent Heater Base

The Intelligent Heater Base is designed to be used in coldclimates where environmental conditions could result in

either icing or condensation aecting the operation odetectors. It is recommended that the heater base be used



Limits the risk of potential for losso unctionality caused to detectors

installed in these conditions.

45681-219 Intelligent Heater Base

45681-519 Waterproo Base Cover45681-217 Deckhead Mounting Box




Small and discrete





21/144


21


STANDARD INTERFACES 78

Input/Output Unit 55000-847 79

Three Channel Input/Output Unit 55000-588 79

Output Unit 55000-849 79

Sounder Control Unit 55000-852 79

Switch Monitor 55000-843 79

Switch Monitor Plus 55000-841 80

Zone Monitor 55000-845 80

MINI INTERFACES 83

Mini Switch Monitor 55000-760 83

DIN-RAIL INTERFACES 81

DIN-Rail Mains Input/Output Unit 55000-797 82

DIN-Rail Sounder Controller (5 Amperes) 55000-182 82

DIN-Rail Input/Output Unit 55000-803 82

DIN-Rail Output Unit 55000-804 82

DIN-Rail Switch Monitor 55000-822 82

DIN-Rail Switch Monitor Plus 55000-821 83

DIN-Rail Zone Monitor with Isolator 55000-812 83

DIN-Rail Dual Isolator 55000-802 83


Intelligent Open-Area Sounder Red 55000-001 61

Intelligent Open-Area Sounder White 55000-002 61

Intelligent 100dB (A) Open-Area Sounder Red 55000-278 61

Intelligent 100dB (A) Open-Area Sounder White 55000-279 61

Intelligent 100dB (A) Open-Area Sounder Slow Whoop White 55000-277 69Integrated Base Sounder 45681-278 70

Integrated Base Sounder with Isolator 45681-277 69

Integrated Base Sounder Slow Whoop 45681-291 70

Integrated Base Sounder Slow Whoop with Isolator 45681-290 69

Integrated Base Sounder DIN-Tone with Isolator 45681-300 69

White Cap 45681-292 69

Red Cap 45681-293 69

Ancillary Base Sounder 45681-276 69

Intelligent Open-Area Beacon Red Lens 55000-009 64

Intelligent Open-Area Beacon Clear Lens 55000-010 64

Loop-Powered Beacon Red 55000-877 64Loop-Powered Beacon Amber 55000-879 64

Loop-Powered Beacon Clear Lens/Red Flash 55000-878 64


Loop-Powered Beacon Base with Isolator 45681-333 72

Loop-Powered Beacon Base with Standard Flash 45681-335 72

Loop-Powered Beacon Base with Australian Flash 45681-337 72

Intelligent Open-Area Sounder Beacon Red Lens 55000-005 66

Intelligent Open-Area Sounder Beacon Clear Lens 55000-006 66

Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-293 66

Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-294 66

Multi-Tone Open-Area Sounder Beacon Red 55000-291 67


22/14422


22


Multi-Tone Open-Area Sounder Beacon White 55000-292 67

Weatherproof Multi-Tone Open-Area Sounder Beacon Red with Isolator 55000-298 66

Weatherproof Multi-Tone Open-Area Sounder Beacon White with Isolator 55000-299 66

Weatherproof Multi-Tone Open-Area Sounder Beacon Red 55000-296 67

Weatherproof Multi-Tone Open-Area Sounder Beacon White 55000-297 67

Sounder Beacon Base with Isolator 45681-330 74

Sounder Beacon Base 45681-331 74

Sounder Beacon Base with Australian Tone 45681-336 74

Sounder Beacon Base with Isolator DIN-Tone 45681-334 74

Sounder Beacon Base with NZ Tone 45681-338 74

Sounder Beacon Base Slow Whoop with Isolator 45681-332 74


23/14423

Analogue Addressable Fire Detection : XPERT Cards

23

Apollos Analogue Addressable ranges use patented

XPERT cards. A unique XPERT card provides simple,

user riendly and accurate identiication o detector

location where a coded card, inserted into the base,

is read by any detector once plugged in. All theelectronic components are in the detector but the

location inormation is held in the base which saves

time and increases accuracy during commissioning.

XPERT cardsanalogue addressable re detection


24/144

Analogue Addressable Fire Detection : XPERT Cards

24

Blank XPERT Card

A universal address card supplied with all bases. Using a

coding guide, pips are removed to set the address o theinserted detector.

Simplifies and speeds up installationand commissioning

Uses patented, proven technology

Address remains the same, no matter

how oten detectors are replaced Flexibility to create any address

38531-771 Blank XPERT Card

Pre-Addressed XPERT Cards

Pre-addressed XPERT cards are supplied with pips alreadyremoved.

Saves time and increases accuracyduring commissioning


Address remains the same, no matterhow oten detectors are replaced

45682-127 Pre-Addressed XPERT Cards 1-126

XPander XPERT Cards

Address card supplied with all bases. Using a coding guide,

pips are removed to set the address o the inserted device. Simplifies and speeds up installation

and commissioning


Address remains the same, no matterhow oten detectors are replaced

Flexibility to create any address

29600-413 XPander Blank XPERT Card (White)

29600-399 XPander Blank XPERT Card (Red)

XPander XPERT cards are not interchangeable with those used with XP95 and Discovery.



25/144

In conventional systems detectors

are wired as a circuit or zone. They

signal re conditions to a control

panel by changing rom a high to

low impedance. The panel detects

this impedance change by current

monitoring and identies the zone.

Individual detectors cannot be

identied.

ConventionalFire Detection


26/144

Conventional Fire Detection : Orbis

26

Orbis is a range of conventional detectors which has been

developed with sophisticated technology previously only

found in analogue addressable detectors. Orbis is a range

with modern styling and incorporates a mounting base

which saves installation time.

The range consists o optical smoke and multisensor detectors, seven grades o heat

detector and a range o bases.

Orbisconventional re detection

Each type of detector is available in two

versions:

Standard

Flashing LED

Key features of Orbis:

Wide operating voltage of 8.5 - 33 VDC

Wide operating and storage temperature

-40C to +70C

Electrically compatible with Series 60 and

Series 65 360 visibility of LEDs

Patented FasTest which reduces the time

taken to test detectors

StartUp for fast commissioning

Automatic drift compensation with

DirtAlert warning

SensAlert which uses a flashing LED to

indicate that the detector is not operating

correctly

Algorithms for transient rejection

Attractive and compact design


27/144


27


Does not have VdS approval

Orbis Optical Smoke Detector

The Orbis Optical Smoke Detector works using the wellestablished light scatter principle, however, the sensing

technology is radically dierent in design rom previousoptical detectors and signiicantly reduces alse alarms.


Performs well in black and whitesmoke

Extra confirmation of smoke beforealarm signal is given

Reduced incidence of false alarms

Sensing chamber keeps out dust andother airborne contaminants

Operates over a broad range ofvoltages at extremes o temperature

ORB-OP-12001-APO Orbis Optical Smoke Detector

ORB-OP-12003-APO Orbis Optical Smoke Detector

with flashing LED

Orbis Multisensor Detector

The Orbis Multisensor detector benefits from

the same alse alarm reduction technology asthe optical detector.

Responds well to fast-burning, flaming

ires Reduced incidence of false alarms

Increased reliability of detection

Sensing chamber keeps out dust andother airborne contaminants

Operates over a broad range ofvoltages at extremes o temperature

ORB-OH-13001-APO Orbis Multisensor Detector

ORB-OH-13003-APO Orbis Multisensor Detectorwith flashing LED

Orbis Heat Detector

The Orbis Heat Detector monitors temperature by using

a single thermistor which provides a voltage outputproportional to the external air temperature. There areseven classes of heat detector in the Orbis range designedto suit a wide variety o operating conditions.

Can be used for applications where

smoke detectors are unsuitable Ideal in environments that are dirty or

smoky under normal conditions

Reduced incidence of false alarms

Increased reliability of detection

Orbis Heat Detector

Rate-o-Rise, MAT 50CORB-HT-11001-APO A1R - Standard

ORB-HT-11013-APO A1R - with flashing LED

Static, MAT 50CORB-HT-11166-APO A1S - Standard

ORB-HT-11167-APO A1S with flashing LED ORB-HT-11002-APO A2S - Standard

ORB-HT-11014-APO A2S - with flashing LED

Rate-o-Rise, MAT 65CORB-HT-11003-APO BR - Standard

ORB-HT-11015-APO BR - with flashing LED Static, MAT 65C

ORB-HT-11004-APO BS - Standard

ORB-HT-11016-APO BS - with flashing LED Rate-o-Rise, MAT 80C

ORB-HT-11005-APO CR - StandardORB-HT-11017-APO CR - with flashing LED

Static, MAT 80C

ORB-HT-11006-APO CS - StandardORB-HT-11018-APO CS - with flashing LED

MAT (Maximum Application Temperature)

USE A1S or A2S

Choosing a heat detector


28/144


28


Orbis LX Base

The Orbis LX Base has two slots for fixing screws at aspacing o 51mm to 69mm. Detectors it into the base one

way only and require clockwise rotation without orce to beplugged in.

One way fit

Detector locking mechanism

ORB-MB-00012-APO Orbis LX Base

TimeSaver Base

The TimeSaver Base is a design that provides installerswith an open working area with ixing holes shaped to

allow a ast mounting procedure.

Grouped terminals to make wiringeasy

Two fixing centres

LED alignment mark

Cable stripping guide


ORB-MB-00001-APO TimeSaver Base

ORB-MB-00002-APO TimeSaver Base LX (simpliied) version

TimeSaver Diode Base

The TimeSaver Diode Base has the same design as thestandard TimeSaver Base with the addition o a diode. Itis used in systems which house active EOL monitoring for

head removal.


Two fixing centres

LED alignment mark


Continuity link for voltage testing ofzone wiring prior to commissioning


Other devices continue to workduring unauthorised removal odetectors

ORB-DB-00003-APO TimeSaver Diode Base

TimeSaver Relay Base

The TimeSaver Relay Base incorporates a single-polevoltage-ree change-over contact or switching external

equipment. When the detector changes to the alarm state,the relay is energised, causing the contact to change state.The contact will remain in this condition until the detector

is reset.


Two fixing centres

LED alignment mark


Continuity link for voltage testing ofzone wiring prior to commissioning


Capable of switching up to 30V at 1A

ORB-RB-10004-APO TimeSaver Relay Base

Sav-Wire Base

The Sav-Wire Base is designed to allow Orbis detectors tobe used in Sav-Wire detection and alarm systems.

Grouped terminals to make wiring easy

Two fixing centres

LED alignment mark



Can be used in Sav-Wiresystems

ORB-SW-10005-APO Sav-Wire Base


29/144


29

Ancillary devices available for the Orbis range:







Deckhead Mounting Box Accessory Kit 45681-218 89






Series 65 to Orbis Base Adaptor ORB-BA-10008-APO 90


Orbis Heater Base

The Orbis Heater base is designed to be used in cold

climates where environmental conditions could result ineither icing or condensation aecting the operation odetectors. It is recommended that the heater base be used



Limits the risk or potential for loss ofunctionality to detectors installed inthese conditions.

ORB-HB-00020-APO Orbis Heater Base45681-519 Waterproo Base Cover

45681-217 Deckhead Mounting Box

TimeSaver Deep Base

The TimeSaver Deep Base is a mounting base for Orbisproducts which has an increased depth which allows or

cables to be inserted into theside o the product.


ORB-MB-00019-APO TimeSaver Deep Base


The MiniDisc Remote Indicator is a light-weight, compact

red LED indicator for use in fire protection systems. Can be used across the entire Apollo

range

Small and discrete




30/144

Conventional Fire Detection : Series 65

30

Series 65 incorporates well-proven sensing technologies

together with advances in materials and electronics.

Developed rom the highly successul Series 60 range o

detectors, Series 65 includes a chip (integrated circuit) based

on that used in XP95 analogue addressable detectors.

Having a wide operating voltage o 9-33V, the Series 65 detectors can be integratedinto security systems, when used with a relay base. The range consists o ionisation,

integrating ionisation and optical smoke detectors, our grades o heat detector and a

range o bases.

Series 65conventional ire detection

Each type of detector is available in

three versions:

Standard

Flashing LED

Flashing LED and magnet operated

test switch

Key features of Series 65:

Wide operating voltage of 933 VDC

Wide operating and storagetemperature of -20C to +60C

Can be used on security systems

Electrically and mechanicallycompatible with Series 60

Proven detection performance


31/144


31


* Does not have CPD or VdS approval

Does not have VdS approval

Series 65 Ionisation Smoke Detector

The Series 65 Ionisation Smoke Detector uses a low activityradioactive oil to detect ires by irradiating the air in the

smoke chamber and causing a current low. I smoke entersthe chamber, the current low is reduced leading to analarm.

Responds well to fast burning, flamingires


Wide operating voltage

Flashing LED and magnet operatedtest switch option55000-217 Series 65 Ionisation Smoke Detector

55000-216 Series 65 Ionisation Smoke Detector with flashing LED 55000-215 Series 65 Ionisation Smoke Detector

with flashing LED and magnetic test switch

55000-208 Series 65 Ionisation Smoke Detector(French)*

Series 65 Integrating Ionisation Smoke Detector

Ionisation detectors use a low activity radioactive oil to

detect ires by irradiating the air in the smoke chamber andcausing a current low. I smoke enters the chamber, thecurrent low is reduced leading to an alarm. Circuitry in

the integrating Ionisation Smoke Detector protects againsttransient levels o smoke above the normal threshold or upto 20 seconds.

Responds well to fast burning, flamingires

Designed to operate in environmentswhere transient levels o smoke maybe expected


Flashing LED and magnet operatedtest switch option

55000-220 Series 65 Integrating Ionisation Smoke

Detector55000-219 Series 65 Integrating Ionisation Smoke

Detector with flashing LED

55000-218 Series 65 Integrating Ionisation Smoke Detector with flashing LED and magnetic

test switch

Series 65 Optical Smoke Detector

The Series 65 Optical Smoke Detector incorporates apulsing LED located within the housing of the detector.

The external detector moulding is identical to that o theionisation detector but has an indicator LED which is clear

in quiescent state but produces red light in alarm.





Flashing LED and magnet operatedtest switch option

55000-317 Series 65 Optical Smoke Detector

55000-316 Series 65 Optical Smoke Detectorwith flashing LED

55000-315 Series 65 Optical Smoke Detector withflashing LED and magnetic test switch

55000-308 Series 65 Optical Smoke Detector (French)*


32/144


32


Series 65 Heat Detector

The Series 65 Heat Detector monitors temperature by usinga dual thermistor network which provides a voltage output

proportional to the external air temperature. There are 12heat detectors in the Series 65 range designed to suit a wide

variety o operating conditions.

Can be used for applications wheresmoke detectors are unsuitable

Ideal environments that are dirty orsmoky under normal conditions

Wide operating voltage Flashing LED and magnet operated

test switch optionSeries 65 Heat Detector

Rate-o-Rise, MAT 50C, MSRT 65C

55000-122 A1R - Standard55000-121 A1R - flashing LED 55000-120 A1R - flashing LED and magnetic test

Rate o Rise, MAT 65C, MSRT 85C55000-127 BR - Standard

55000-126 BR - flashing LED

55000-125 BR - flashing LED and magnetic test Rate-o-Rise, MAT 80C, MSRT 100C

55000-132 CR - Standard55000-131 CR - flashing LED

55000-130 CR - flashing LED and magnetic test Static, MAT 80C, MSRT 100C55000-137 CS - Standard

55000-136 CS - flashing LED 55000-135 CS - flashing LED and magnetic test

MAT (Maximum Application Temperature)

MSRT (Maximum Static Response Temperature)

Series 65 Standard Base

The Series 65 Standard Base has been designed to enabledetectors to be itted without the need o orce particularly

useul when itting to suspended ceilings. All Series

65 bases have a one way only it. They can be lockedinto place by a grub screw using a 1.5mm hexagonal

screwdriver - part number 29600-095.


One way fit

Easy to wire

Contains an earth connector

Contains no electrical parts

45681-200 Series 65 Standard Base

Series 65 Diode Base

The Series 65 Diode Base is designed or use with

conventional systems that have manual call points anddetector bases on the same circuit. The base is itted witha schottky diode on the L1 IN and L1 OUT wiring

terminals. This base can only be used with compatiblecontrol equipment.


One way fit

Easy to wire


Continues to work duringunauthorised removal o detectors

45681-201 Series 65 Diode Base


33/144


33


Series 65 Sav-Wire Base

The Series 65 Sav-Wire Base is designed to allow Series65 detectors to be used in Sav-Wire detection and alarm

systems.


One way fit

Easy to wire


45681-206 Series 65 Sav-Wire Base

Series 65 Auxiliary Relay Base

The Series 65 Auxiliary Relay Base provides two sets o

volt-ree changeover contacts to acilitate the switching o aremote LED or other auxiliary device.


One way fit

Easy to wire

Contains an earth connector45681-246 Series 65 Auxiliary Relay Base

Series 65 End-of-Line Relay Base

The Series 65 End-of-Line (EOL) Relay Base is intended foruse with 4-wire circuits and eatures two sets o changeovercontacts and a power supervision relay.

Detector locking mechanism One way fit

Easy to wire

Contains an earth connector45681-247 Series 65 End-of-Line Relay Base 12V

45681-248 Series 65 End-of-Line Relay Base 24V

Series 65 12V Relay Base

The Series 65 12V Relay Base is designed or use in bothire and security systems. For ire systems a jumper on the

PCB is itted to a latching position. For security systemsthe jumper is moved to another position so that the base is

non-latching.


One way fit

Easy to wire

Contains an earth connector Can be used in fire and security

systems45681-508 Series 65 12V Relay Base

Series 65 Standard Relay Base

The Series 65 Standard Relay Base provides one set o volt-ree, changeover (orm C) contacts that change state when

the detector signals an alarm.


One way fit

Easy to wire

Contains an earth connector45681-245 Series 65 Standard Relay Base


34/144


34

Ancillary devices available for the Series 65 range:




Series 65 Base Cover 45681-370 88

Conduit Box 45681-204 88Module Base 38531-822 88






Series 65 Sounder Base 45681-512 69

Series 65 Sounder Base with diode 45681-513 69




Small and discrete

Anti-tamper screw to protect against

unauthorised removal



35/144

Two-wireTechnology

In conventional systems, detectors

are hard wired into a circuit or zone.

They signal a re condition to a

control panel by changing rom a

high to low impedance. The panel

detects this impedance change by

current monitoring and identies the

zone. Individual detectors cannot be

identied. In two-wire conventional

systems, re detection and alarm

products are connected to the

same pair o supply wires, makinginstallation quicker, less expensive

and more fexible than traditional our-

wire systems. Two-wire systems are

particularly well suited or small to

medium sized buildings.


36/144

Two-wire Technology : AlarmSense

36

Two-wire AlarmSense has been developed to make the

design and installation o a re detection and alarm system

easier and more economic or small to medium sized

buildings. The range also allows an existing system to be

extended or modied i necessary. This fexibility makes

AlarmSense an excellent choice for use in HMOs.

The two-wire AlarmSense range incorporates a number o technologically advanced

eatures such as patented RemovAlert which alerts the control panel i a detector has

been removed without authorisation.

The entire AlarmSense range has been designed to enable compliance with BS5839-1

and BS5839-6 in addition to EN54 standards. AlarmSense is also compliant with the

Construction Products Directive (CPD).

AlarmSensetwo-wire technology

Key features of AlarmSense include:

Patented RemovAlert head

removal monitoring

Local and general alarm switching Reduced wiring costs

Quick and simple installation

False alarm reduction with non-

priority signalling

Flexible system design

Detectors and call point alarms

identifiable separately


37/144


37

AlarmSense Optical Smoke Detector

The AlarmSense Optical Smoke Detector works using thelight scatter principle. The detector changes to alarm state

at a pre-set threshold o smoke penetration into the sensingchamber.



360 visibility of LEDs Reduces false alarms

Quick and simple installation55000-390 AlarmSense Optical Smoke Detector

AlarmSense Heat Detector

There are two heat detectors in the AlarmSense range

designed to suit a wide variety o operating conditions. A

static heat detector (CS) which responds only when a ixedtemperature has been reached and a rate-o-rise detector(A1R) which has a ixed upper limit, but in addition,measures the rate o increase in temperature.

Can be used for applications wheresmoke detectors are unsuitable


CS detectors are ideal for use inenvironments with rapid temperatureluctuations such asboiler rooms

Reduction of false alarms

360 visibility of LEDs


55000-190 AlarmSense Heat Detector A1R

55000-193 AlarmSense Heat Detector CS

AlarmSense Integrating Optical Smoke Detector

The AlarmSense Integrating Optical Smoke Detector worksusing the light scatter principle. The detector changes to

alarm state at a pre-set threshold o smoke penetration intothe sensing chamber. The detector also has the ability tomonitor and discard transient sources o smoke.



360 visibility of LEDs

Quick and simple installation Designed to operate in environments

where transient levels o smoke maybe expected

Reduces false alarms

20 second delay

55000-391 AlarmSense Integrating Optical Smoke Detector

AlarmSense BaseAlarmSense detectors can only be mounted into theAlarmSense Base. The base is used or installing detectorsthat do not require an integral sounder or sounder beacon.

Detects the removal of a detectorhead and reports a ault

Continues to work duringunauthorised removal odetectors

Quick and simple installation45681-244 AlarmSense Base



38/144


38


AlarmSense Alarm Relay

The AlarmSense Alarm Relay enables devices such asbeacons, pillow/bed alarms and radio vibrating or paging

devices to be connected to the ire detection system. Thisallows the system to comply with the requirements o the

DDA.

Ensures DDA compliance

55000-835 AlarmSense Alarm Relay

AlarmSense Manual Call Point

The AlarmSense Manual Call Point is compliant withEN54:11. It is different from other conventional call points

in that it can be detected as an operated call point ratherthan a detector that has changed to the alarm state.

Gives immediate response

Unique identification signalling

Resettable element

55100-894 AlarmSense Manual Call Point (Surace)


The MiniDisc Remote Indicator is a light-weight, compact

red LED indicator for use in fire protection systems. Can be used across the entire Apollo

range

Small and discrete



AlarmSense Sounder Base

The AlarmSense Sounder Base can only be used withAlarmSense detectors. It is itted with electronic circuitryto monitor the presence o detectors and signals any

unauthorised removal o detector heads. It is supplied witha high or low volume setting and red or white caps areavailable or stand-alone installation.




Provides audible signal and detectionat one point

High and low volume ranges45681-510 AlarmSense Sounder Base

45681-295 Red Cap45681-294 White Cap

AlarmSense Sounder Beacon Base

The AlarmSense Sounder Beacon Base is designed to be

used with AlarmSense detectors only. It is supplied witha high or low volume setting and red or white caps are

available or stand-alone installation.

Sounder range between 70dB(A) and87dB(A)



Quick and simple installation45681-509 AlarmSense Sounder Beacon Base

45681-295 Red Cap45681-294 White Cap


39/144


39


AlarmSense Open-Area Sounder Beacon

The AlarmSense Open-Area Sounder Beacon is designed foruse in open areas.

AlarmSense priority/non priority signalrecognition

Head removal signalling

Single Apollo tone - synchronised

with AlarmSense sounder, sounderbeacon bases

Synchronised flashing red LED onsounder beacons and beacons

Polarity insensitive

55000-017 AlarmSense Open-Area Sounder Beacon

AlarmSense Open-Area Sounder

The AlarmSense Open-Area Sounder has been designed for

use in open areas. AlarmSense priority/non priority signal

recognition


Single Apollo tone - synchronised withAlarmSense sounder, sounder beaconbases

Polarity insensitive

55000-018 AlarmSense Open-Area Sounder

AlarmSense Open-Area Beacon

The AlarmSense Open-Area Beacon has been developed foruse in situations where there is a risk that sounders will not

be heard. It is weatherproo and can be used outside.

AlarmSense priority/non priority signalrecognition


Synchronised flashing LEDs

Polarity insensitive55000-035 AlarmSense Open-Area Beacon


40/144


40

Ancillary devices available for the AlarmSense range:









Deckhead Adaptor PG16 - M20 27249-005 89




Apollo makes ordering AlarmSense products for a project easy with a

selection of detector/sounder base or detector/sounder beacon basepackages.

Sounder Base Combination Part Number

AlarmSense Optical Smoke Detector with Sounder Base 55000-392

AlarmSense Integrating Optical Smoke Detector with Sounder Base 55000-393

AlarmSense A1R Heat Detector with Sounder Base 55000-196

AlarmSense CS Heat Detector with Sounder Base 55000-197

Sounder Beacon Base Combination Part Number

AlarmSense Optical Smoke Detector with Sounder Beacon Base 55000-394

AlarmSense Integrating Optical Smoke Detector with Sounder Beacon Base 55000-395

AlarmSense A1R Heat Detector with Sounder Beacon Base 55000-198

AlarmSense CS Heat Detector with Sounder Beacon Base 55000-199


41/144

Traditionally, re detection systems in

industrial and commercial applications

have used hard wired installations.

These systems are generally installed

at the time o construction or

reurbishment, making the laying

o cables less o an issue. Certain

applications do not lend themselves

to this approach, such as occupied

buildings, heritage sites, palaces,

annexes etc. - this is where wireless

systems provide the ideal solution.

WirelessTechnology


42/144

Wireless Technology : XPander

42

XPanderwireless technologyXPander is a system in which individual detectors, call points

and alarm devices and interaces communicate with the

XP95 loop by radio signals. An interace is connected to the

loop in the same way as any other interace, such as an input/

output unit.

Every XPander device is assigned an address and this address is recognised by

the control panel in the same way as the address o any other device connected

directly to the loop wiring. The XPander range benefits from the patented XPERT

technology that is also used in Discovery and XP95. See page 23 or more details.

XPander can be incorporated into ire detection systems in stately homes

and architecturally sensitive buildings where the use o ire cables is either

impractical or undesirable.

Key features of XPander include:

Easy to install

XPERT card addressing

Self-monitoring

Proven technology

No special control panel needed

868MHz radio channels

Up to 31 devices per interface

Up to 5 interfaces per loop

All detectors within the XPander range are

sold with mounting bases.

Please ensure that you have attended an

approved XPander training course prior topurchasing products rom the XPander range.

A site survey tool must be included in the irst

order o XPander products as a site survey

must be carried out prior to installation.


43/144


43


XPander Optical Smoke Detector and Mounting Base

The XPander Optical Smoke Detector works on the lightscatter principle and is ideal or applications where slow-

burning or smouldering ires are likely.

Wireless

Performs well in black and whitesmoke

Bi-directional radio communications

XPERT card addressing system 5 year battery life using standard AA

alkaline batteries

XPA-CB-12034-APO XPander Optical Smoke Detectorand Mounting Base

XPander Multisensor Detector and Mounting Base

The XPander Multisensor Detector contains an opticalsmoke sensor and a thermistor temperature sensor whose

outputs are combined to give the inal analogue value.

Wireless

Multisensor technology reduces falsealarms

Increased sensitivity to flaming fires

XPERT card addressing system

5 year battery life using standard AAalkaline batteries

XPA-CB-13032-APO XPander Multisensor Detector and

Mounting Base

XPander Heat Detector and Mounting Base

There are two heat detectors in the XPander range designedto suit a wide variety o operating conditions. A static heat

detector (CS) which responds only when a ixed temperaturehas been reached and a rate-o-rise detector (A1R) whichhas a ixed upper limit, but in addition, measures the rate o

increase in temperature.

Wireless

Can be used in applications wheresmoke detectors are unsuitable


CS detectors are ideal for use inenvironments with rapid temperatureluctuations such as boiler rooms

Bi-directional (monitored) radio platform

5 year battery life using standard AAalkaline batteries

XPander Heat Detector and Mounting Base

XPA-CB-11170-APO Rate-o-Rise (A1R) 57degrees

XPA-CB-11171-APO Static (CS) 90 degrees

XPander Input/Output Unit

The XPander Input/Output Unit is a radio based interface andoers two monitored input circuits and two relay outputs. It

can be used or controlling ire doors, ire dampers, smokevents and other ire engineering applications.

Wireless

Monitored switch circuit

Voltage free contacts Capable of switching up to 30V at 1A

5 year battery life using standard AAalkaline batteriesXPA-IN-14011-APO XPander Input/Output Single Unit

XPA-IN-14012-APO XPander Input/Output Dual UnitA mains relay module (XPA-IN-14013-APO) is also available


44/144


44


XPander Loop Interface

The XPander Loop Interace can monitor up to 31 XPanderdevices and report each devices status to an intelligent

control panel.

Upgraded to connect up to 31XPander devices to an XP95 loop

Translates radio signals from XPanderdetectors to the control panel

Built in loop isolator Loop-poweredXPA-IN-14007-APO XPander Interace Unit

XPander Manual Call Point

The XPander Manual Call Point is compliant with EN54:11.

It is wireless and is powered by two independent packs o 3AA alkaline batteries with a typical ive year lie.

Wireless

XPERT addressing

Resettable element

Fast response reports an alarm inunder one second

LED to indicate operation

XPA-MC-14006-APO XPander Manual Call Point

XPander Sounder Beacon and Sounder Base

The XPander Sounder Beacon and Sounder Base is wireless

and designed to be used with XPander detectors andmanual call points.

Wireless

Bi-directional (monitored) radioplatorm

Choice of 32 selectable tones

Audible self-test available

Output is between 92dB(A) and106dB(A) at 1m - dependent on tonesetting

XPA-CB-14003-APO XPander Red Sounder Beacon and Red Sounder Base

XPA-CB-14004-APO XPander Amber Sounder Beacon and White Sounder BaseXPA-CB-14005-APO XPander Clear Sounder Beacon and

White Sounder Base

XPander Sounder and Sounder Base

The XPander Sounder and Sounder Base is wireless anddesigned to be used with XPander detectors and manual

call points.

Wireless

Bi-directional (monitored) radio platform

Choice of 32 selectable tones

Audible self-test available

Output is between 92 and 106db(A)at 1m - dependent on tone setting

XPA-CB-14001-APO XPander Sounder and Sounder Base RedXPA-CB-14002-APO XPander Sounder and Sounder Base

White

XPander Survey Tool

The XPander Survey Tool is used at the site survey stage

to ascertain i a site is suitable or an XPander installation.A site survey must be carried out beore XPander can be

installed.

Indicates the suitability of proposeddevice location

XPA-TE-14010-APO XPander Survey Tool


45/144


45

There are four aerials available to complement the XPander range:

XPander Aerial (XPA-AE-14008-APO) which is used to strengthen the radio signals sent betweenthe XPander Interace Unit and XPander devices.

XPander Directional Aerial (XPA-AE-14009-APO) which is used to pick up radio signals rom

outbuildings and annexes. XPander Weather Resistant Vertically Aerial (XPA-AE-14014-APO) which includes 3 metres o

co-ax, surge protector and attenuator. For external use (IP68).

XPander Weather Resistant Directional Aerial (XPA-AE-14015-APO) which includes 3 metres oco-ax, surge protector and attenuator. For external use. (IP54).


46/14446

Flush MountedTechnology


47/144

Flush Mounted Technology : Plateau

47

PlateauThe level-headed detectorPlateau is a major advance in ire detector design, providing

eective detection with minimum intrusion. The Plateau

smoke detector, when installed, is a very slim device. It

is ideal or use in installations where it is impractical or

undesirable to use a standard smoke detector. This might

be or aesthetic reasons, where an architect speciiesunobtrusive ire detection, or it might be or reasons o saety,

where a standard ire detector might be viewed as a hazard,

or example in a prison cell.

Plateau is designed for installation in:

Prestige offices

Listed buildings

Designer boutiques

High-class hotels

Museums

Exclusive residences


48/144

Flush Mounted Technology : Plateau

48


Plateau Optical Smoke Detector Flush Mounted

Plateau has been designed or discrete unobtrusive smokedetection and is ideal or prestigious oices and high class

hotels. It operates on the light scatter principle where a lightbeam is transmitted through the cover plate. In the event

o any smoke being in close proximity to the detector, thelight is relected back into the receiver which will changethe alarm state ater conirmation o smoke. Plateau comes

complete with backbox with internal retaining laps andsupporting ring.

Unobtrusive design

Self-checking

Effective detection with minimumintrusion

Aesthetically pleasing

55000-050 Plateau Optical Detector Flush Mounted

Plateau Optical Smoke Detector Vandal Resistant

Plateau operates on the light scatter principle but the lightbeam is transmitted through the cover plate where it isscattered by any smoke that is close to it. The light that

is scattered is registered by the receiver in the detectorwhich will change to the alarm state ater conirmation

o the presence o smoke. The vandal resistant versionincorporates a stainless steel plate or use in custodialinstitutions or where a high degree o protection is required.

Stainless steel plate

Unobtrusive design

Self-checking

Effective detection with minimumintrusion

55000-051 Plateau Optical Smoke Detector Vandal

Resistant


49/144

In addition to standard detectors,

Apollo oers a range o specialist

detectors suitable or a wide variety o

applications.

Specialist

Detectors


50/14450

Specialist Detectors :Flame Detectors

50

Flame Detector

catalogo completo da apollo 2011

Documents