cat204 ing ted edited
TRANSCRIPT
HIGH-PRESSURE KITSHOCHDRUCKANLAGEN
Fireco has always been on the cutting edge in the developmentof High pressure kits with membrane and piston pumps. Firecohas sold more than 10.000 motor pumps and high-pressure kitsin 90 countries all over the world. Constant research, development
and know how due to many years of experience and competition allow Fireco to offer 120different models to satisfy our customers.
Fireco annually produces more than 800 units for its customers and works in collaboration withmost Worldwide constructors to develop customized solutions.
This puts Fireco in a leadership position in the marketplace. There have been attempts by othercompanies to copy the Fireco design but there is no way to copy the many years of experience,product quality and innovation that make Fireco the leader in this field.
Fireco hat immer eine führende Leitung gehabt in der Produktion von Hochdruckanlagen mitMembran- und Kolben Pumpen. Dank andauernder Forschung, Entwicklung, Know-how, Erfahrungdas von der Gegenüberstellung zur Konkurrenz stammt und mehr als 10.000 gelieferteHochdruckanlagen in 90 verschiedenen Ländern, kann Fireco 120 verschiedene Modelle aufdem internationalen Markt anbieten, mit vielfältigen Varianten, die jedes Bedürfnis des Kundenbefriedigen.
Fireco stellt diese Geräte serienmäßig und industriell her, mit einer Produktionsfähigkeit bis 800Stück pro Jahr. Auch Dank Vereinbarungen mit den größten Herstellern weltweit von FeuerwehrFahrzeugen, denen Fireco spezielle Geräte liefert.
Dies hat zu einer Leadership des Markts gebracht, auch mit der Nachfolge von einigen Kopienimprovisierter Hersteller. Jedes Produkt kann leicht kopiert werden, aber Fireco Produkteunterscheiden sich von den Anderen wegen der jahrelangen Erfahrung, Anzahl der hergestelltenProdukte, andauernde Innovationen und ein gutes Preis - Qualität Verhältnis. Diese Eigenschaftenbestätigen das wirkliche Know-how von Fireco in diesem Sektor.
4
THE ADVANTAGES OF HIGH PRESSURE
VORTEILE DES HOCHDRUCKS
Over the years, new pump technologies have been developed that use less water volume to achieve the same extinguishingcapacity. This minor flow rate when combined with the high pressure of membrane and piston pumps and the possibilityto combine them with small capacity tanks have resulted in the development of high pressure kits. High pressure pumpspermit an increase of the cooling capacity of water by creating a greater surface area and thermal absorption of thewater droplets. The great extinguishing power of the water is the result of its vaporization and expansion, which allowit to absorb great quantities of heat. The water becomes steam by applying heat of 573 Kcal (2395 Kjoule). A waterjet subdivided into small droplets in comparison to a full water jet absorbs more heat and transforms more quickly intosteam due to the increased surface area. The expansion rate of the water as it turns to steam increases the extinguishingcapacity of the water. 1 litre of water produces about 1700 litres of steam at a temperature of 100°C. As the temperatureis increased, the quantity of steam increases as well. In fact, at 260°C, 1 litre water becomes approximately 2400 litresof vapour and approximately 4200 litres at 650°C. The vapour extinguishes the fire by suffocation. The water dividedinto smaller parts occupies the space around the fire and displaced the oxygen that the fire needs for combustion. Thecondensed vapour helps knock down the gases, smoke and particles of combustion in closed rooms. A motor pumpoperating at 100, 150 and 170 bars produces a water mist 3 times larger than one produced by a motor pump at 40bars. The result is that with the same water volume, the piston motor pump doubles the extinguishing capacity andensures more security for the operator due the length of the water jet, direct or nebulized, is increased. With a directjet at 100 bar, it’s also possible to crumble incandescent cinders, to make operations of land reclamation and, mostimportant, to double the extinguishing capabilities at great height differences.A motor group can be equipped with a premixer, which mixes different types of foam additives, in order to deal firesthat need this kind of extinguishing. In order to use better the High pressure Kit, the Fireco mixing system allows theuse of various types of liquids (antifreeze, detergents, anticryptogamics etc.) allowing the kits can be used for variousapplications.
CONFIGURATIONWASSERSTRAHL
DESCRIPTIONBESCHREIBUNG
VALUEWERT
40 BAR40 BAR
100 BAR100 BAR
Full jetDirekt
Nebulized jetNebel
Cooling of the structure at distanceAbkühlung der entfernten Struktur
Circumscription of pine needle fires(perforation breaking of the combustible class A)
Abgrenzung von Kiefernadeln Brand (Durchlöcherungund Zerbrechung des Brennstoffs Klasse A)
Suffocation by the produced vapour and coolingunder the combustion temperature
Erstickung durch den Dampf dass von derErkelterung unter der Brenntemperatur entsteht
JetWurf
= 15 m = 20 m
Kinetic energyKinetische Energie 0,3 kJ/s 1,2 kJ/s
Ø dropØ Tropfen > 1 mm 250÷400 μ m
Specific surface of thermicexchange
Fläche des thermischenAustausches
1,5 m2/liter1,5 m2/Liter
3,75 m2/liter3,75 m2/Liter
Im Laufe der Jahre wurden neue Technologien erfunden wobei das Feuer mit weniger Wasser gelöscht werden kannund mit dem Vorteil immer leichtere und kleinere Anlagen zu haben. Weniger Wasser Volumen, die Membran- oderKolben Hochdruck Pumpen und die Möglichkeit diese mit kleineren Tanken zu vereinigen, hat zur Herstellung von denHoch Druck Anlagen gebracht. Durch die Vergrößerung der thermischen Ausgleichsfläche der Wassertropfen, erhöhtsich die Abkühlungskapazität. Die große Löschungsfähigkeit des Wassers ist von dem Effekt der Verdampfung gegeben,die viel Hitze aufnehmen kann. Das Wasser braucht eine Hitze von 573 Kcal (2395 Kjoule) um Dampf zu werden. Mehrerekleinere Tropfen löschen besser das Feuer als ein kompakter Wasserstrahl, und verwandelt sich leichter in Dampf weilmehr freie Fläche an die Hitze kommt. In Nebel verwandelt, breitet sich das Wasser aus und erhöht die Löschungsfähigkeit.1 Liter Wasser erzeugt zirka 1700 Liter Dampf mit einer Temperatur von 100°C. Die Menge vergrößert sich mit derErhöhung der Temperatur, denn bei 260°C erzeugt 1 Liter Wasser 2400 Liter Dampf, und bei 650°C zirka 4200 Liter.Der Dampf löscht das Feuer durch Erstickung. In kleineren Tropfen aufgeteilt nimmt das Wasser den Raum um das Feuerein, und entzieht dem Feuer den nötigen Sauerstoff. Der Dampf kann auch Teil der Gase und Rauche der Verbrennungin geschlossenen Räumen entfernen. Die Kolben Motorpumpen 100, 150 und 170 bar stellen eine Dampfwand her, die3 Mal größer ist als die von einer Motorpumpe mit 40 bar. Das Resultat ist, dass mit gleichem Verbrauch, die KolbenMotorpumpen die Löschungsfähigkeit verdoppeln und sicherer für den Benutzer sind, weil die direkten Wasserstrahlenund der Dampf sich erhöhen. Mit direktem Wasserstrahl bei 100 bar ist es auch möglich kleinere brennende Holzscheitenzu zerstückeln. Auch kann man tiefe Urbarmachung durchführen und, sehr wichtig, kann man die Löschung von Feuermit großen Höhenunterschieden verdoppeln.Alle Motorpumpen können mit einem Schaum Vormischer ausgestattet werden, der verschiedene Schäume mischt umunterschiedliche Brände löschen zu können. Außerdem kann man mit dem Vormischungssystem von Fireco seit einigenJahren auch unterschiedliche Flüssigkeiten benutzen (Frostschutzmittel, Reinigungsmittel, Pflanzenschutzmittel usw.),dies erlaubt mit der gleichen Ausstattung mehrere Anwendungen zu haben.
5
CONFORMITY, GUARANTY AND CERTIFICATIONS
KONFORMITÄT, GARANTIE UND BESCHEINIGUNGEN
ISO 9001.2000
AQAP 110NATO
CE CONFORMITYCE - KONFORMITÄT
USE AND MAINTENANCEINSTRUCTIONS
GEBRAUCHS- UNDINSTANDHALTUNGS-
ANWEISUNGEN
SPARE PARTS EXPLODED VIEWSEXPLOSIONSZEICHUNGEN MIT ERSATZTEILE
GUARANTY CERTIFICATIONSGARANTIE
The professionalism and experienceof the world leader in this industry
Die Professionalität und die totale Garantie desweltweiten Marktführers der Produktion in diesem Sektor
6
TANKS IN PRFV, KEVLAR/CARBONIUM AND INOX,“CUBE”, “L” OR “T” SHAPED
TANKE IN GLASFASER PRFV/KARBONIUM,“L” , “T” UND “WÜRFEL” FÖRMIG
PRFV TANKMONOLITHIC“L” SHAPEDFROM 350 TO 800LT.
TANK INGLASFASER PRFVMONOLITHISCH“L“ FÖRMIG VON350 BIS 800 LT.
PRFV TANK WITH LOW BARYCENTRE FROM 1250 TO 2500 LT.TANK IN GLASFASER PRFV MIT TIEFEN BARYZENTRUM VON 1250 BIS 2500 LT.
PRFV TANKMONOLITHIC “L”SHAPED WITHKEVLAR/CARBONIUMREINFORCEMENTSFROM 400 TO 600 LT.
TANK IN GLASFASERPRFV MONOLITHISCH“L“ FÖRMIG VON 400BIS 600 LT.
PRFV TANKMONOLITHIC “T”SHAPED WITHKEVLAR/CARBONIUMREINFORCEMENTSFROM 400 TO 600 LT.
TANK INGLASFASER PRFVMONOLITHISCH “T“FÖRMIG VON 400 BIS600 LT.
7
HIGH PRESSURE KITS AND TANKS IN PRFV CUBE SHAPED
TANKE UND HOCHDRUCK ANLAGEN IN PRFV WÜRFELFÖRMIG
HIGH PRESSURE KITS AND TANKS IN PRFV SPECIAL QUAD
TANKE UND HOCHDRUCK ANLAGEN IN PRFV SPEZIAL FÜR QUAD
HIGH PRESSURE KITS AND TANKS IN PRFV “L” SHAPED
TANKE UND HOCHDRUCK ANLAGEN IN PRFV “L“ FÖRMIG
HIGH PRESSURE KITS AND TANKS IN PRFV “T” SHAPED
TANKE UND HOCHDRUCK ANLAGEN IN PRFV “T“ FÖRMIG
8
SPECIAL ONE-PIECE TANKS IN PRFV (FIBREGLASS) FOR FIRE FIGHTING KITS
WASSERTANKE IN GLASFASER (PRFV) FÜR FEUERWEHR HOCHDRUCKANLAGEN
There was a revolution in the design of high pressure kit tanks when, in 1997, the Fireco staff carefullyexamined the problems with current tank designs. They came to the conclusion that the fundamental targetsto reach were:
1• LIGHT WEIGHT: the Fireco kits with PRFV Tanks are 50% lighter than those made from differentmaterials (stainless steel) and permit a lighter load on the vehicle or allow an increase of thewater capacity of the tank without increasing the overall weight on the vehicle.2• RESISTANCE: the combination of fibreglass and resins makes the tank more rigid and resistantwhen compared to other tank materials while at the same time making the tank easier to repair(the same material technology is used for racing vehicles, regatta boats and airplanes).3• PRODUCT/PRICE: PRFV tanks have lower manufacturing costs and this positively influences theprice of the final product.4• MONOLITHIC TANK5• SELF EXTINGUISHING TANKS
Thanks to new manufacturing techniques of PRFV, it is possible to develop new products with innovative form andstructure, making it MONOLITHIC (one piece only). This innovation has in fact eliminated the problem of the limitedmechanical resistance to lateral and centrifugal forces of tanks not produced with this method.The ‘’old’’ manufacturing technique consists of the construction of 2 half-shells whose perimeters are glued togetherafterwards. This construction method can result in problems due to the continuous vibration generated by a vehicle drivenon uneven ground or by the simple vibration caused by the use of the kit. This often causes cracking of the 2 parts alongthe seam. This new manufacturing technique permits the construction of a tank in one operation with homogenous andcontinuous veining on all sides. The bottom is prepared with veining of with 50 mm high density reinforced polyurethane.In a few hours the body of the tank can be placed in it and be stratified with fibreglass on the outside, inside and on thewhole perimeter (which, after the polarization, becomes one complete piece). This assembly method has permitted theelimination of the heavy steel frame that was used to reinforce the juncture of the 2 half-shells.The resins used are of the F.R. type, anti-flame, according to the norms.
- DIN 53438 Part 3 - Classification F 1/37 m/m- FIAT 50433 - Classification non flammable- FIAT 50433/01 - Classification non primable by flame
Fireco guaranties PRFV tanks for 5 years.
Im Bereich der Hochdruckanlagen gab es eine Revolution im Jahr 1997 als die technischen Mitarbeitern von Fireco (einigevon Ihnen haben die ersten Hochdruckgeräten vor 20 Jahren entwickelt und hergestellt) nach aufmerksamer Beobachtungder Einsatzprobleme, zum Schluss kamen, dass die folgende Ziele zu erreichen waren:
1• MAXIMALE LEICHTIGKEIT: die Fireco Wasserbehälter in Glasfaser sind durchschnittlich um 50%leichter als die in anderen Materialen (Edelstahl) und dank dieser Eigenschaft hat man eingeringeres Gewicht auf dem Fahrzeug; und die Möglichkeit die Wasservolumen bei gleichemGewicht zu erhöhen.2• WIEDERSTANDSFÄHIGKEIT: die Vereinigung von Glasfasern und Harz mit den neuestenTechnologien gibt eine höhere Solidität und Widerstandsfähigkeit im Gegensatz zu anderenMaterialen und die Geräte sind auch einfacher zu reparieren (die gleiche Technologie wird fürRennwagen, Regatte Boote und Flugzeuge verwendet).3• PREIS/QUALITÄT: die Behälter in Glasfaser sind preiswerter zu produzieren, was sich natürlichauf dem Preis des End-Produkts wiedergibt.4• MONOLITISCHE TANKE5• NICHT BRENNBARE WASSERBEHÄLTER
Dank der neuen Bearbeitungstechnologien des Glasfaser (PRFV) ist es möglich ein Produkt mit radikal neuer Form undStruktur herzustellen, das monolithisch ist (eine einzige Einheit). Diese Neuigkeit beseitigt die geringe mechanischeWiderstandsfähigkeit, gegen quere und zentripetale Stoße, dass ein großer Nachteil der anderen Tanke ist. Denn in der“alten“ Bearbeitungsmethode besteht der Tank aus zwei Halbschalen deren Umfang später durch Klebung vereinigt wird.Dieses System ist aber Stößen oder Vibrationen nicht widerstandsfähig und kann sich in zwei Teile trennen. Die neueBearbeitungstechnologie stellt hingegen einen Tank in einer einzigen Form her, mit homogenen und fortsetzenden Rippenauf der ganzen Höhe der Seiten. Der Boden wird gleichzeitig hergestellt, mit Rippen von 50mm, mit sehr dichtemPolyurethan verstärkt, und wird dann im Tank einmontiert. Der Tank wird innerhalb und außerhalb mit Glasfaser überzogen.Diese Bearbeitung erlaubt den Eisen Rahmen zu entfernen, der im alten System für die Einheit der zwei Teilen diente,und so in Gewicht zu gewinnen.Die eingesetzten Harze sind des F.R. Typs, nicht brennbar, laut Norm:
- DIN 53438 Teil 3 - Klassifikation F 1/37 m/m- FIAT 50433 - Klassifikation nicht Brennbar- FIAT 50433/01 - Klassifikation nicht mit Flamme entzündbar
Fireco gibt 5 Jahre Garantie auf die PRFV Wasserbehälter
9
FIRECO’S CONTINUOUS INNOVATION
ANDAUERNDE INNOVATION DER FIRECO PRODUKTE
The annual quantity of kits produced by Fireco allows our company to offer a wide range of them. The productsare the result of continuous innovation (“T” shaped tanks, mixing system, automatic accelerator for membraneand piston pumps, automatic turn off by empty tank), international patented inventions and cooperationwith professional end users.The regulations bind every manufacturer of high pressure kits to provide also:
- CE Conformity certificate and guarantee certificate
- Use and maintenance instructions
- Catalogue/Spare parts exploded views
FIRECO is one of the few companies that respects these regulations and guaranties theinterchangeability of components as required by the ISO 9001-20001 regulations and theavailability of the spare parts for 10 years.FIRECO is a leader in the production of tanks made from reinforced polyester resins withadvanced fibres (KEVLAR-CARBON FIBRE) due to 15 years experience in this field andexclusive collaboration with one of the market leaders.
Die jährliche Quantität von hergestellten Hochdruckanlagen, erlaubt Firecoimmer eine größere Auswahl anzubieten. Dank der fortsetzenden Innovation(”T“ förmige Tanke, Vormischungsanlagen, automatischer Beschleunigungder Pumpen mit Kolben und Membranen, automatische Ausschaltung desMotors bei leerem Tank) haben wir immer neue Technologien, einige auchinternational patentiert. Dies ist das Resultat jahrelanger Erfahrung aufdem weltweiten Markt mit den Kunden, die, wie in allen Sektoren, daswirkliche professionelle Vermögen sind.Laut der geltenden Gesetze müssen alle Hochdruckanlagen Herstellerfolgendes liefern:
- CE Konformitätszertifikat und Garantiezertifikat
- Gebrauchs- und Instandhaltungs- Anweisungen
- Katalog/Explosionszeichnungen
FIRECO ist eine der wenigen Firmen die alle Gesetze respektiert, dieauswechselbare Teile über die Zeit liefert, die ISO 9001-20001 Rechtsvorschreibenrespektiert und die Ersatzteile für 10 Jahre lang liefert. FIRECO ist seit Jahrenführend in der Herstellung von Tanken mit Polyester Harz, verstärkt mittechnologisch fortschrittlichen Fiber (KEVLAR-Fiber in Kohlenstoff) dank der15jährigen Erfahrung in diesem Sektor und der exklusiven Mitarbeit mit einerLeader Firma.
Motor pump 42 litres at 100 bars with foam proportioning system. This new system allows mixing of foamand filming agents with proportioning of 0.1÷6%, independent of the circuit load. It is possible to use theproportioning system with every length, also 200m, and type of hose. In the new systems, the foam entersdirectly into the pump. This prevents the proportioning system from suffering from the dynamic influencesof pressure from the system load and to operate normally when the pump is running (Only for specificmodels. Please look at page 27).
Die Motorpumpe mit 42 Liter, 100 bar hat ein System für proportionierten Schaum. Das neue System erlaubtSchaummittel und Filmmittel zu vermischen mit einer Proportion von 0.1÷6%, unabhängig von der Belastungdes Kreises. Man kann demnach die Mischung mit jeder Rohrlänge, auch 200m lang, und Rohrtyp benutzen.Das Herz des neuen Systems hat einen direkten Eingang des Schaums in die Pumpe. Dank dieser Eigenschaftist die Proportion nicht von der Dynamik des Flusses beeinflusst und kann regelmäßig arbeiten wenn diePumpe in Betrieb ist. (Für die einzelnen Motorpumpen Modelle bitte auf Seite 27 nachschlagen).
10
PATENT PENDING: MOTOR PUMP FHP100 SYSTEM DELUXE MODEL
PATENT PENDING: MOTORPUMPE FHP100 ® SYSTEM DELUXE
Thanks to the new proportioning foam system, the pump FHP100 permits use of the kit for a other applications thatare usually performed by the municipalities or civil services: cleaning of streets, public spaces’ equipment, traffic signs,pelmets, guardrails, fountains, illuminations, tunnels and for the general land reclamation. It is possible to use anti-cryptograms, powders, foam agents etc. This versatility is a distinguishing characteristic of the Fireco High pressurekits when compared to the competitors’ products.
Mit der Motor Pumpe FHP100 mit Schaum Mischung kann die Hochdruckanlagen nicht nur für Feuer, sondern auchfür andere Zwecke und in anderen Sektoren benutzen werden, die sehr wichtig für die Gemeinden und für denZivilschutz sind, wie z.B. Reinigung der Straßen, städtischen Ausstattung, Straßenschilder, Müllcontainers, Leitplanken,Straßenbeleuchtung, Tunnel usw. und für die generelle Urbarmachung, dadurch dass man Anticryptogamische Stoffe,Pulver, Schaummittel, etc. benutzen kann. Diese Vielseitigkeit kennzeichnet die Hochdruck Anlagen von Fireco nochmehr im Gegensatz zur Konkurrenz. Der Kunde kann dass Produkt für mehrere Zwecke und in mehreren Sektoreneinsetzten.
UNIVERSAL UTILIZATION OF THE MOTOR PUMP FHP100
UNIVERSELLER GEBRAUCH DER MOTOR PUMPE FHP100
CONFIGURATIONWASSERSTRAHL
DESCRIPTIONBESCHREIBUNG
VALUEWERT
100 BAR100 BAR
Full jetDirekt
Nebulized jetNebel
Structure cooling at distanceKühlung der Struktur in Entfernung
Circumscription of pine needle fires (perforation breaking of the fuel class A)Abgrenzung von Kiefer Nadeln Brand
(Durchlöcherung Zerbrechung des Brennstoffs Klasse A)
Suffocation by steam generated andcooling below the combustion temperature
Erstickung durch den Dampf von der Kühlung unter derEinschaltungstemperatur des brennenden Materials
RangeWurf
= 20 m
Kinetic energyKinetische Energie 1,2 kJ/s
Ø dropØ Tropfen 250÷400 μ m
Specific surface ofthermic exchange
Fläche des thermischenAustausches
3,75 m2/liter3,75 m2/Liter
Foam with mediumexpansion
SchaummittelAusbreitung
AvailableLieferbar
Enginecharacteristics
MotorEigenschaften
404 cc9,9 Kw/13HP @3600rpm
Gasoline/Benzin310 g/kWh
7,0 l
Foam with lowexpansion
Schaum geringeAusbreitung
AvailableLieferbar
42 l/min100 bar
31450 rpm
8,2 kW
PumpscharacteristicsPistons 42/100
Eigenschaftender Kolben
Pumpe 42/100
Separation of the fuel from the combustibleTrennung des Brennstoffs vom Feuer
Displacement/HubraumMaximum Power/Max. Stärke
Fuel /BrennstofftypFuel Consumption/Verbrauch
Fuel Tank Capacity/Tank
SuffocationErstickung
Capacity/FähigkeitMaximum pressure/Max. Druck
N° of pistons/Kolben AnzahlN° of turns /Drehungs- Anzahl
Absorbed power/Aufgenommene Stärke
11
GENERAL INDEXGenerelles VerzeichnisPUMPS AND ENGINES COMBINED WITH HIGH PRESSURE KITSPUMPEN UND MOTORE FÜR HOCHDRUCK ANLAGEN
- Specific technical description of the pump models Spezifische technische Angaben der Pumpen Modelle- Specific technical description of the petrol engine models Spezifische technische Angaben der Benzin Motor Modelle- Specific technical description of the diesel engine models Spezifische technische Angaben der Diesel Motor Modelle
PAG.
12
13
14
KITS WITH TANKS IN FIBREGLASS PRFVHOCHDRUCKANLAGEN MIT GLASFASER TANK (PRFV)
- Code identification of the high pressure kits Artikelnummern der Hochdruck Anlagen- Preparation of the tanks in fibreglass PRFV Vorstellung der Tanke in Glasfaser- High pressure kits with PRFV tanks “L” shaped Hochdruckanlagen mit “L” förmigen Glasfaser Tank- High pressure kits with PRFV tanks “ cube” shaped Hochdruckanlagen mit “Würfel” förmigen Glasfaser Tank- High pressure kits with PRFV tanks special for quad “cube” shaped Hochdruckanlagen mit speziellen “Würfel” förmigen Tank für Quad Motorrad- High pressure kits with PRFV tanks “T” shaped Hochdruckanlagen mit “T” förmigen Glasfaser Tank
PAG.
15
15
16
17 & 18
19
20
KITS WITH TANKS IN FIBERGLAS KEVLAR/CARBONHOCHDRUCKANLAGEN MIT KEVLAR/KARBONIUM TANKE
- High pressure kits in fibreglass KEVLAR/CARBON Vorstellung der Kevlar/Karbonium Tanke- High pressure kits with tanks “L” shaped in Kevlar/Carbon Hochdruckanlagen mit “L” förmigen Kevlar/Karbonium Tank
PAG.
21
22
MOTOR PUMP GROUPSMOTORPUMPEN GRUPPEN
- Presentation of the preparation and models of pump groups standard Vorstellung der Motorpumpen Gruppen Standard- Technical description of the motor pump group SPECIAL 42 Lt./min 100 bar Technische Angaben der speziellen Motorpumpen 42 Lt./1’ bei 100 bar
PAG.
26
27
KITS WITH TANKS IN STAINLESS STEELHOCHDRUCKANLAGEN MIT EDELSTAHL TANK
- Preparation of the high pressure kits with tanks in stainless steel Vorstellung der Hochdruckanlagen mit Edelstahl Tank- High pressure kits with tanks “ L” and “cube” shaped in stainless steel Hochdruckanlagen mit “L” und “Würfel” förmigen Edelstahl Tank- High pressure kits with tanks “T” shaped in stainless steel Hochdruckanlagen mit “T” förmigen Edelstahl Tank
PAG.
23
24
25
ACCESSORIES FOR KITS AND MOTOR PUMP GROUPSZUBEHÖR FÜR HOCHDRUCKANLAGEN UND MOTORPUMPEN GRUPPEN
- Accessories for kits and motor pump groups Zubehör für Hochdruckanlagen und Motorpumpen Gruppen
HIGH PRESSURE HOSE CHARACTERISTICSEIGENSCHAFTEN DER HOCH DRUCK ROHRLEITUNGEN
PAG.
28 - 32
33
12
PUMP MODELS
PUMPEN VORSTELLUNG
Pumps with 3 diaphragms half-hydraulic.Aluminum body parts in contact with liquidare anodized. Additional outlet with tap.Incorporated control board.
Pumpen mit 3 Membranen halbhydraulisch,mit Aluminium Körper und eloxierten Teile(welche im Kontakt mit Flüssigkeiten kommen).Zusätzlicher Hahnausgang. EingebauteBedienung.
MODELMODELL
CAPACITYLEISTUNG
MAX PRESSUREMAX. DRUCK
WEIGHTGEWICHT
50/40
MAX. RPMMAX. UMDREHUNGEN
55 Lt./min. 40 bar 550 13 Kg
70/40 71 Lt./min. 40 bar 550 20 Kg
BAR RPM 550Lt/1’
0
20
30
40
55
53
51
50
BAR RPM 550Lt/1’
0
20
30
40
70,7
69,5
68,8
67,8
Pumps with 3 or 4 diaphragms half-hydraulic.Aluminum body parts in contact with liquid areanodized. 1 or 2 additional outlets with tap.Incorporated control board.
Pumpen mit 3 und 4 Membranen halbhydraulisch,mit Aluminium Körper und eloxierten Teile (welcheim Kontakt mit Flüssigkeiten kommen). 1 oder 2zusätzliche Hahnausgänge. Eingebaute Bedienung.
MODELMODELL
CAPACITYLEISTUNG
MAX PRESSUREMAX. DRUCK
WEIGHTGEWICHT
80/40
MAX. RPMMAX. UMDREHUNGEN
81 L/min. 40 bar 550 20 Kg
100/50 105 L/min. 50 bar 550 22 Kg
Pumps with 3 diaphragms half-hydraulic, with air space and parts incontact with liquid anodized. Complete with reducer for the cylindricalshaft 1”. Incorporated control board.
Pumpe mit 3 Membranen, halbhydraulisch, mit Luftkammer und eloxiertenTeile (welche im Kontakt mit Flüssigkeiten kommen). Komplett mitÜbergang auf 1” Rohr. Eingebaute Bedienung.
MODELMODELL
CAPACITYLEISTUNG
MAX PRESSUREMAX. DRUCK
WEIGHTGEWICHT
135/20
MAX. RPMMAX. UMDREHUNGEN
132 Lt./min. 20 bar 550 14 Kg
Pumps with 3 diaphragms in ceramic,with connecting rod – crank system,hydraulic seal on the piston with doublegasket and self recovery of the losses,male shaft Ø24 mm.
Pumpe mit 3 Kolben in Keramik, mitPleuelstange-Kurbel System,hydraulische Dichtungen auf demKolben mit doppelter Dichtung undautomatischen Ausgleich bei Verlust,männlicher Anschluss Ø24mm.
Attention: The pumps’ capacities have to be considered in exit before the delivery manifold
A.B. Die Leistungen der Pumpen sind in Ausgang vor dem Sammelanschluss zu verstehen.
50/40 70/40
BAR RPM 1750Lt/1’
0
60
120
170
36
35,7
35,3
35
BAR RPM 1750Lt/1’
0
50
100
150
43,5
42,9
42,7
42,3
BAR RPM 1450Lt/1’
0
35
70
100
43,5
43
42,8
42,7
42/100 42/150 37/170
BAR RPM 550Lt/1’
0
30
40
50
105,6
104,3
103
101
100/50
BAR RPM 550Lt/1’
0
20
30
40
81
74,2
72,6
70,80
80/40
MODELMODELL
CAPACITYLEISTUNG
MAX PRESSUREMAX. DRUCK
WEIGHTGEWICHT
42/100
MAX. RPMMAX. UMDREHUNGEN
42 Lt./min. 100 bar 1450 16 Kg
42/150 42 Lt./min. 150 bar 1450 16 Kg
37/150 37 Lt./min. 170 bar 1000 16 Kg
BAR RPM 550Lt/1’
0
10
15
20
131,7
127
126,5
126
135/20
13
PETROL ENGINE MODELS
BENZIN MOTORE
EH 41 B 9,9 kW - 13,5 HP 404 cm3 7 Lt. 1,2 Lt.
EH 65 B 16,4 kW - 22 HP 653 cm3 / 1,55 Lt.
31 Kg
44 Kg
MODELMODELL
CAPACITYKRAFT
CYLINDERZYLINDER
OIL CAP.ÖL INHALT
TANK CAPACITYTANK INHALT
WEIGHTGEWICHT
ROBIN/SUBARU engines model EH features a cylinder inclinedat a 35° angle which results in a reduction of the engine’sheight, making it more compact. High efficiency and resistance– reduction of the camshaft from 2 to 1 with lower weight,higher efficiency and less noise - manufactured for highperformance due to a reliable structure of sleeves in ironcylinders, double air cleaner and ball bearings of greatdimensions positioned on both sides of the crankshaft –superior oil control and less consumption due to an excellentsystem, an over dimensioned breather pipe, to a valves’ vapoursealing system and to a high cooling capacity – reliable startingat first strike due to a new electronic ignition and to amechanical decompression systems that reduces the towcapacity of the recoils. Certified CARB/EPA. Every model iscomplete with electric start, alternator for battery recharge and emergency manual start.
Die ROBIN/SUBARU Motore EH sind schräg gebaut mit einem Zylinder Winkel von 35°. Der Vorteil ist dass man dieMotorhöhe reduzieren kann und der Motor deshalb kompakter ist. Hohe Leistungen und Widerstandsfähigkeit. DieVerteilerwelle wurde von 2 zu 1 verkleinert und ist leichter, leistungsfähiger und leiser. Große Leistungsfähigkeit dankeiner zuverlässigen Struktur von Muffen mit Stahlzylindern, doppelter Luftreiniger und größere Kugellager auf denKurbelwellenseiten. Verbesserte Ölkontrolle und weniger Verbrauch dank eines hervorragenden Systems, einesgrößeren Ablass, einer Vorrichtung für die Dampfhaltung der Ventile und einer hohen Verkelterungsfähigkeit. SichereAbfahrt auf Anhieb dank einer neuen elektronischen Injektion und eines mechanischen Dekompressionssystem, dassdie Rückschläge reduzieren. CARB/EPA Bescheinigungen. Alle Modelle komplett mit elektrischen Start,Wechselstromgenerator für Batterie Ladung und manueller Start für Notfall.
BRIGGS & STRATTON VANGUARD engines with overheadvalves, DURA-BORE liner for better wear resistance, doubleball bearings, DUAL-CLEAN air filter with pleated paper andsponge pre-filter, mechanical decompression ofdecompression, OIL-GUARD automatic stopping system toconsiderably reduce the risk of damage to the motor dueto insufficient lubrication, electronic ignition withMAGNETRON that does not need maintenance. Every modelis complete with electric start, alternator for battery rechargeand emergency manual start.
BRIGGS & STRATTON VANGUARD Motore haben Ventile inder Vorderseite, Buchse in DURA-BORE für einen besserenWiderstand gegen Abnutzung, doppeltes Kugellager, LuftfilterDUAL-CLEAN mit gefälteltem Blatt und Pro-Filter in Schwamm, mechanischer Dekompressor für die Dekompression,Anhaltssystem OIL-GUARD das das Risiko von Schaden an den Motor, wegen ungenügender Schmierung, beschränktund elektrische Anzündung mit MAGNETRON, die keine Arbeitskraft benötigt. Alle Modelle komplett mit elektrischenStart, Wechselstromgenerator für Batterie Ladung und manueller Start für Notfall.
* ROBIN/SUBARU petrol engines also available on demand* Auf Anfrage sind auch ROBIN/SUBARU Motore Benzin erhältlich
OHV 9 HP 6,5 kW - 9 HP 296 cm3 7,9 Lt. 1,4 Lt.
OHV 13 HP 9,7 kW - 13 HP 391 cm3 7,9 Lt. 1,5 Lt.
27,3 Kg
33,2 Kg
OHV 18 HP 13,4 kW - 18 HP 570 cm3 8,5 Lt. 1,7 Lt. 33,3 Kg
MODELMODELL
CAPACITYKRAFT
CYLINDERZYLINDER
OIL CAP.ÖL INHALT
TANK CAPACITYTANK INHALT
WEIGHTGEWICHT
RUGGERINI LOMBARDINI diesel engines, model RY mono cylindrical 4 times air cooled,conical drive on the shaft, counter clockwise rotation, direct ignition, forced lubricationof the pumps with lobes, centrifugal speed counterweight , internal oil filter with totaltransition, oil discharge blow-by with security device, automatic addition of fuel for ignition,automatic combustible drainage, couple calibrator, automatic decompression, basementin die casted aluminium with barrel in integral cast iron, head in aluminium alloy, integralfeet and hydraulic tappet. Motors standard equipped with: ignition with self winding andautomatic decompression. Fuel tank, fuel filter, air dry filter, muffler silencer with protection,accelerator and stop with direct control, electric start and alternator for battery recharge.
Die RUGGERINI LOMBARDINI Diesel Motore RY haben einen Zylinder mit 4 Takten Luftgekühlt,einen konischen Wellenanschluss, Drehung dem Uhrzeigersinns entgegen, direkte Injektion,gezwungene Pumpenschmierung, Regulation der Schleuderkraft, innerer Ölfilter mit totalem
Durchgang, Rückströmung des Ölablass mit Sicherheitsvorrichtung, automatischer Nachtrag von Brennstoff für das Starten,automatische Leerung des Brennstoffs, Ausgleich der Kraft, automatische Dekompression, Druckguss Aluminium Basis mitRohr in vollständigen Gusseisen, Vorderseite in Aluminium Legierung, volle Füße und hydraulische Stößel. Die Motore sindStandard mit folgendem ausgestattet: Start mit Selbsteinwicklung und automatische Dekompression, Brennstoff Tank,Brennstoff Filter, trocken Luftfilter, Schallgedämpfter Auspufftopf mit Beschützung, Gaspedal und Stopp mit direkterSteuerung. Alle Modelle komplett mit elektrischen Start, Wechselstromgenerator für Batterie Ladung und manueller Startfür Notfall.
RUGGERINI LOMBARDINI diesel engines, model MD bi-cylindrical 4 times air cooled, directignition, forced air cooling with flywheel ventilator, feeding with mechanical fuel pump,oil filter with total web transition (with external cartridge for MD 191), automatic additionof mechanic fuel, couple calibrator, speed regulator at centrifugal masses, load bearingbasement tunnel shaped in die cast aluminium, electric ignition, counter clockwise rotation,independent heads in aluminium alloy and independent cylinders in reboring cast iron.Engines standard equipped with: electrical ignitions with engine and alternator 12V, blackpainting for the plate parts, accelerator board at distance, oil bath air filter with prefilter, oil pressure switch, web filter (external for MD 191), manifold muffler, fixing feet,shaft drive, little board, feeding pump, counter clockwise rotation power take off, automaticmechanical addition and oil radiator (only for MD 191).
Die RUGGERINI LOMBARDINI Diesel Motore MD haben zwei Zylinder mit 4 Takten Luftgekühlt, direkte Injektion,gezwungene Kühlung mit Schwungrad für Ventilation, Speisung mit mechanischer Brennstoffpumpe, Ölfilter mit totalenDurchgang im Netz (mit äußerer Patrone für MD 191), automatischer mechanischer Nachtrag von Brennstoff, Ausgleichder Kraft, Schleuderkraftregulation, Tunnelförmige Tragebasis in Druckguss Aluminium, elektrischer Antrieb, Drehungdem Uhrzeigersinn entgegen, selbständige Vorderteile in Aluminium Legierung und selbständige Zylinder in Gusseisen.Die Motore sind Standard mit folgendem ausgestattet: elektrischer Anlass mit kleinem Motor und Wechselstromgenerator12V, schwarze Lackierung für Blechteile, Gaspedalfernsteuerung, Luftfilter in Öl gebadet mit Staub Filter, Öl Druckwächter,Netzfilter (außen für MD 191), Auspufftopf Krümmer, Fixierungsfüße, einen konischen Wellenanschluss, kleine Schalttafel,Speisungspumpe, Drehung dem Uhrzeigersinn entgegen, automatischer mechanischer Nachtrag von Brennstoff undÖlkühler (nur für MD 191).
HATZ diesel engines, model B mono-cylindrical 4 times air cooled – reduced vibrations with the innovative systemat counter rotating shafts – easy ignition with automatic decompression – easy ignition also by low temperaturesalso at -10°C with self winding – swinging discharge gases at norm CARB and EPA TIER II – combustion system sealedin order to avoid the exit of the fuel by turned over engine – basement decompression with patented system thatavoids the emission of oil vapours into the environment or into the aspiration circuit – function inclination withangle 35° in every direction – noise reduction – reduced fuel consumption – immediate motor stop with directdevice on the injection pump – extraordinary sturdy and durable – low reparation and maintenance costs.
Die HATZ Diesel Motore B haben einen Zylinder mit 4 Takten Luftgekühlt, haben weniger Vibrationen dank desinnovativen Systems von Gegenrollenden Maste, leichteren Anlass mit automatischer Dekompression, leichten Startauch im Winter mit Selbsteinwicklung, auch bei -10 °C, verstellbarer Gasablass. Sind den amerikanischen GesetzenCARB und EPA TIER II entsprechend. Die Motore haben versiegelte Brennstoffanlagen um Verluste von Brennstoffauch bei umgestürzten Motor zu vermeiden, Dekompression der Basis mit patentiertem System, dass Ablasse vonÖldämpfe in die Umwelt und im Ansaugkreis verhindert, schräge Benutzung mit 35° Winkel in jede Richtung,Verringerung der Geräusche, sehr geringer Brennstoffverbrauch, direkter Anhalt des Motors durch direkter Wirkungauf die Injektionspumpe, sehr stabil und dauerhaft, geringe Reparatur- und Instandhaltungskosten.
1B30 5,4 kW - 7,3 HP cm3 5 Lt. 1,1 Lt. 35 Kg
MODELMODELL
CAPACITYKRAFT
CYLINDERZYLINDER
OIL CAP.ÖL INHALT
TANK CAPACITYTANK INHALT
WEIGHTGEWICHT
MODELMODELL
CAPACITYKRAFT
CYLINDERZYLINDER
OIL CAP.ÖL INHALT
RY 103
TANK CAPACITYTANK INHALT
7,3 kW - 10 HP 401 cm3 5 Lt. 1,5 Lt.
RY 110 8,1 kW - 11 HP 442 cm3 5 Lt. 1,5 Lt.
WEIGHTGEWICHT
45 Kg
45 Kg
RY 125 8,8 kW - 12 HP 505 cm3 5 Lt. 1,5 Lt. 48 Kg
MD 151 12 kW - 16,3 HP 654 cm3 4 Lt. 1,8 Lt.
MD 191 14 kW - 19 HP 851 cm3 4 Lt. 1,8 Lt.
60 Kg
63 Kg
MODELMODELL
CAPACITYKRAFT
CYLINDERZYLINDER
OIL CAP.ÖL INHALT
TANK CAPACITYTANK INHALT
WEIGHTGEWICHT
14
DIESEL ENGINE MODELS
DIESEL MOTORE
Example for a High pressure kit with 400lt tank PRFV “L” shaped with petrol motor pump 50 litres 40 bar: EP.040L01BBeispiel für die Bestellung einer Hochdruck Anlage mit Tank 400 l “L“ förmig in PRFV mit Motorpumpengruppe Benzin 50 l/ 40 bar: EP.040L01B
Example for fire fighting pump group petrol 50 litres 40 bar: 01BBeispiel für Feuerwehr Pumpengruppe Benzin 50Lt/40 bar: 01B
Available in the versions of 100, 150, 200, 350, 400, 500, 600, 800, 1000, 1250, 1500, 2000, 2500, 3000 and 3500 Lt.;“cube”, “L”, “T” shaped and special for Quad. It is possible to combine them with the motor groups : 50, 70, 80 and 100Lt/min. at 40 and 50 Bar – 135 Lt./min. at 20 bar - 42 Lt/min. at 100 and 150 Bar with petrol engines standard of 9, 13 and18 HP and diesel motors of 10, 11, 12, 15 and 19 HP.The kits are complete with: n° 1 gun with switch for full or nebulizedjet with a capacity of 40 Lt./min. – steel hose reel 50 m tube PVC for diaphragms pumps and tube R1 metallic core for pistonpumps - filter with interchangeable cartridge positioned on the aspiration line – down adjustable overflow pipe – three wayvalve Ø 45 with brass UNI 804 connector for priming external to the tank or filling from a tank truck or from a fire hydrant– level at communicating vessels - manhole Ø 330 for internal inspection – manual accelerator – stating and stop – secondaryconnection already installed and complete with quick coupling – feeding valve of the principal hose reel and secondary delivery– connection, disconnection and pressure regulation lever – pressure regulation valve – pressure visualizing manometer –spiraled aspiration reel 6 m with brass UNI 25 bottom valve – lower draining valve – various junctions for connection withthe pump group – Use and maintenance instructions.
Erhältlich in den Versionen mit 100, 150, 200, 350, 400, 500, 600, 800, 1000, 1250, 1500, 2000, 2500, 3000 und 3500Lt, “L“, “T“ und “Würfel“ förmig und speziell für Quad Motorrad.Man kann diese mit Pumpengruppen mit 50, 70, 80 und 100 Lt/Min. bei 40 und 50 Bar – 135 Lt./Min. bei 20 bar - 42 Lt./Min.bei 100 und 150 Bar gebrauchen und mit Benzinmotoren Standard 9, 13 und 18 PS und Dieselmotoren 10, 11, 12, 15 und19 PS.Anlagen komplett mit: einer Pistole für Voll und Nebel Strahl mit 40Lt./Min. Leistung – Stahlschlauch mit 50m Rohr in PVCfür Membranpumpen und Rohr R1 mit metallischer Kern für Kolbenpumpen - Filter mit auswechselbarer Patrone auf derAnsauglinie – Überlauf Rohr nach Unten verstellbar – drei Weg Ventil Ø 45 mit Nippel in Messing UNI 804 für Füllung außerhalbdes Tankes oder Füllung von Tankwagen oder Hydrant – Wasserspiegel mit kommunizierenden Röhren - Mannloch Ø 330für Innenkontrolle – manuelles Gaspedal – Schlüssel für Anlassen und Anhalten – zweiter Auslass schon vorgesehen undkomplett mit schnellen Verbindungsstücken – Speisungsventil für den Hauptschlauch und zweiten Auslass – Hebel fürEinrückung, Ausrückung und Druckregelung – Ventil für Druckregelung – Manometer für Druckanzeige – 6Mt. Spiralrohr fürAnsaugung mit Bodenventil in Messing UNI 25 – Ventil für untere Dränierung - mehrere Verbindungsnippeln mit derPumpengruppe – Gebrauchs- und Verhaltungsanweisungen.
15
DATA FOR PLACING AN ORDER FOR A HIGH PRESSURE KIT
BESTELLUNGSDATEN FÜR HOCH DRUCK ANLAGEN
#TANK CAPACITY
TANK INHALT
010 100 Lt.
015 150 Lt.
020 200 Lt.
035 350 Lt.
040 400 Lt.
045 450 Lt.
050 500 Lt.
055 550 Lt.
060 600 Lt.
080 800 Lt.
100 1000 Lt.
125 1250 Lt.
150 1500 Lt.
200 2000 Lt.
250 2500 Lt.
E P 040 L 01 B
#TANK MATERIALTANK MATERIAL
P Prfv
K Kevlar
I Aisi 304 L
A Aisi 316 L
#TANK SHAPETANK FORM
L L
T T
C Cubo
Q Quad
#FEEDING
BRENNSTOFF
B..hp Petrol/Benzin
D..hp Diesel/Diesel
ENGINE / MOTOR
# l/min bar
01 050 040
02 070 040
03 080 040
04 100 050
05 135 020
50 042 100
51 042 150
52 034 170
53 042 100 Deluxe
PUMP / PUMPE
FIRECO ESK KITS IN PRFV STANDARD
ESK GERÄTE IN GLASFASER PRFV FIRECO STANDARD
Diaphragms pumps (from 01 to 05) and pistonpumps (from 50 to 52) are available with bothpetrol and diesel engines (except of the special
model Deluxe 53, only available with petrol engine)
Die Membranpumpen (von 01 zu 05) undKolbenpumpen (von 50 zu 52) sind erhältlich mit
Benzin oder Diesel Motore (Modell Deluxe 53ausgeschlossen, nur mit Benzin Motor erhältlich)
16
HIGH PRESSURE KITS ESK PRFV “L” SHAPED
HOCHDRUCK ANLAGEN ESK PRFV “L” FÖRMIG
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A. : not available / N.E. : nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
PRFV Tanks/PRFV Tanke Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
PPrfv
LShapeForm
035040050060080
03500400050006000800E
MTP
50
51
52
53
080138010701080170138010701080205138010701080195138010701080208138010701080204138010701080217138010701080205
06013801070860141
13801070860176
13801070860166
13801070860179
13801070860175
13801070860188
13801070860176
05013801070860141
13801070860176
13801070860166
13801070860179
13801070860175
13801070860188
13801070860176
040103010101020121
103010601020156
103010101020146
103010601020159
103010101020155
103010601020168
1030900
1020156
03511701010860118
1170800860153
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
080138010701080155138010701080186138010701080173138010701080193138010701080175138010701080214138010701080217138010701080231138010701080180138010701080204
06013801070860126138010708601571380107086014413801070860164138010708601461380107086018513801070860188138010708602021380107086015113801070860175
05013801070860126138010708601571380107086014413801070860164138010708601461380107086018513801070860188138010708602021380107086015113801070860175
0401030960
1020106
1030960
1020137
1030960
1020124
1030960
1020144
1030960
1020127
1030960
1020165
103010601020168
103010601020182
103010101020131
103010101020155
035117096086010311709608601341170960860121117096086014111709608601231170960860162
1170101086012811701010860152
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
17
HIGH PRESSURE KITS ESK PRFV “CUBE” SHAPED
HOCH DRUCK ANLAGEN ESK PRFV “WÜRFEL” FÖRMIG
PRFV Tanks/PRFV Tanke Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
PPrfv
CShapeForm
010020060100125150200250
01000200060010001250150020002500
E
MTP
01
02
03
04
05
06019259607951101965960795141192596079512819659607951481925960795131196596079516919251060795172196510107951861925101079513519651010795159
0201170102057095
1210102057012611701020570113121010205701331170102057011512101020570
15411701060570157121010205701711170102057012012101020570144
010117096057089
1210960570120117096057010712109605701271170960570110121096057014811701060570152121010105701651170101057011412101010570138
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
25034101900700317345019007003483410190070033534501900700355341019007003373450190070037634101900700379345019007003933410190070034234501900700366
20029101900700277
29501900700308
29101900700295
29501900700315
29101900700297
29501900700336
29101900700339
29501900700353
29101900700302
29501900700326
15024601720700237250017207002682460172070025525001720700275246017207002572500172070029624601720700299250017207003132460172070026225001720700286
12522101720700214225017207002462210172070023222501720700252221017207002352250172070027322101720700277225017207002902210172070023922501720700263
10019501195860177199011958602081950119586019519901195860215195011958601981990119586023619501195860240199011958602531950119586020219901195860226
18
HIGH PRESSURE KITS ESK PRFV “CUBE” SHAPED
HOCH DRUCK ANLAGEN ESK PRFV “WÜRFEL” FÖRMIG
MTP
50
51
52
53
06019651010795125
19651060795160
19651010795150
19651060795163
19651010795159
19651060795172
1885890795160
02012101020570110121010605701451210102057013512101060570148121010205701441210106057015711301020570145
0101210101057010412101060570139121010105701291210106057014212101010570138121010605701511130800570139
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D12 hp
B19 hp
25034501900700332
34501900700367
34501900700357
34501900700370
34501900700366
34501900700379
33701900700367
20029501900700292
29501900700327
29501900700317
29501900700330
29501900700326
29501900700339
28701900700327
15025001720700252
25001720700287
25001720700277
25001720700290
25001720700286
25001720700299
24201720700287
12522501720700230
22501720700265
22501720700255
22501720700268
22501720700264
22501720700277
21701720700264
10019901195860192199011958602271990119586021719901195860230199011958602261990119586023919101195860227
*ATTENTION: The max. capacities of the motor pump groups are intended to be separated and individually on the pump outlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzeln und getrennt in Ausgang vor dem Sammelanschluss zu verstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
*High pressure kits are also available with tank capacities of 3000 and 3500 lt.*Auf Anfrage sind auch Geräte mit Tanken von 3000 und 3500 L erhältlich
19
HIGH PRESSURE KITS ESK PRFV SPECIAL FOR QUAD “CUBE” SHAPED
HOCH DRUCK PUMPEN ESK PRFV SPEZIELL FÜR QUAD MOTORRAD “WÜRFEL” FÖRMIG
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
PRFV Tanks/PRFV Tanke Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
PPrfv
QShapeForm
010015020
E
MTP
50
51
52
53
020850
1010838112
8501000838147
0158501010753107
8501000753142
0108501010683102
8501000683137
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
02085010008059685010009031288501000838115850100090313585010008381178501000893156
85010108051228501010903146
01585010007209185010008181238501000753110850100081813085010007531128501000808151
85010107201178501010818141
01085010006508685010007481188501000683105850100074812585010006831078501000738146
85010106501128501010748136
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
010001500200
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
20
HIGH PRESSURE KITS ESK PRFV “T” SHAPED
HOCHDRUCK ANLAGEN ESK PRFV “T” FÖRMIG
PRFV Tanks/PRFV Tanke Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
PPrfv
TShapeForm
035040045050055060
350 Lt.400 Lt.450 Lt.500 Lt.550 Lt.600 Lt.
E
MTP
50
51
52
53
06016951350600152
16951350600187
16951350600177
16951350600190
16951350600186
16951350600199
16151350600187
05516101350600148
16101350600183
16101350600173
16101350600186
16101350600182
16101350600195
15301350600183
04514401350600138
14401350600173
14401350600163
14401350600176
14401350600172
14401350600185
13601350600173
04013551350600134
13551350600169
13551350600159
13551350600172
13551350600168
13551350600181
12751350600169
03512701350600129127013506001641270135060015412701350600167127013506001631270135060017611901350600164
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
05515701350600133161013506001641570135060015116101350600171157013506001531610135060019215701350600195161013506002091570135060015816101350600182
05014851350600128152513506001591485135060014615251350600166148513506001481525135060018714851350600190152513506002041485135060015315251350600177
04514001350600123144013506001541400135060014114401350600161140013506001431440135060018214001350600185144013506001991400135060014814401350600172
04013151350600119135513506001501315135060013713551350600157131513506001391355135060017813151350600181135513506001951315135060014413551350600168
03512301350600114127013506001451230135060013212701350600152123013506001341270135060017312301350600176127013506001901230135060013912701350600163
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
06016551350600137169513506001681655135060015516951350600175165513506001571695135060019616551350600199169513506002131655135060016216951350600186
05015251350600143
15251350600178
15251350600168
15251350600181
15251350600177
15251350600190
14451350600178
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
21
FIRECO PRFV TANKS REINFORCED WITH KEVLAR-CARBON
TANKE IN PRFV (GLASFASER) FIRECO VERSTÄRKT IN KEVLAR-KARBONIUM
PRFV tank chassis Kevlar/Carbonreinforced, self - supporting
PRFV Tank Struktur inKevlar/Karbonium verstärkt
As a result of the continuous research and development and of the experience from thousands of kits sold all over theworld, the PRFV tanks are now available in Kevlar/Carbon. This new system results in kits that have a higher resistanceover time and are self-supporting. They are also lighter because there is no need for a steel frame.The differences between this new system and the STANDARD PRFV are:
- Available only with 350, 400, 500 and 600 Lt.- The tank has a reinforcing structure in Carbon and Kevlar fibre with 4 threads in stainless steel on the tank that permit the mounting of the HP motor pump groups up to 150kg. The Kevlar-Carbon structure functions as a doubletransversal bulkhead inside the tank.- The tank base is 40mm in height and is shaped to allow the lifting and transportation of the tank with a fork truck; furthermore to reinforce the one-piece structure, there is an inner base reinforcing plate with adhesive andbi-component polyurethane structure.
Kits come complete with: 1 gun with switch for full or nebulized jet with capacity of 40 Lt./min. – steel hose reel 50m tube PVC for diaphragms pumps and tube R1 metallic core for piston pumps - filter with an interchangeable cartridgeon the aspiration line – downward adjustable overflow pipe – three way valve Ø 45 with brass UNI 804 connector forexternal priming or filling from a tank truck or from a fire hydrant – level at communicating vessels - manhole Ø 330for internal inspection – manual accelerator – starting and stopping – second connection already installed and completewith quick coupling – feeding valve of the principal hose reel and second connection – connection, disconnection andpressure regulation lever – pressure regulation valve – pressure visualizing manometer – spiraled aspiration reel 6 m withbrass UNI 25 bottom valve – lower draining valve – various junctions for connection with the pump group – Use andmaintenance instructions
Die Wassertanke in PRFV, dank der fortsetzenden Forschung und Entwicklung und dank der Erfahrung der tausendverkauften Geräte überall auf der Welt, sind nun auch in der innovativen Version in Kevlar-Karbonium erhältlich. Diesesind widerstandskräftiger in der Zeit und sind gleichzeitig selbsthaltend (und deswegen viel leichter, weil der EisenRahmen nicht benötigt wird).Im Vergleich zu den Tanken in PRFV STANDARD sind diese:
- Erhältlich nur mit einem Inhalt von 350, 400, 500 und 600 Lt.- Der Tank hat eine Verstärkungsstruktur in Kevlar und Karbonium Fiber, mit 4 Zapfen in Edelstahl die aus dem Tankhervorragen für Montage von Hochdruck Motorpumpengruppen bis 150 kg. Die Kevlar-Karbonium Struktur dient auch als doppelte quere Schottwand im Tankinneren.- Der Tankboden liegt im Inneren für 40 mm in Höhe auf einen Umfangssockel und ist geformt um den Tank mit den Gabelstapler zu transportieren;um die Einheit zu verstärken ist eine innere Verstärkungsplatte als Boden vorhanden, mit polyurethaner Struktur aus zwei Komponenten.
Anlage komplett mit: einer Pistole für Voll und NebelStrahl mit 40Lt./Min. Leistung – Stahlschlauch mit 50mRohr in PVC für Membranpumpen und Rohr R1 mitmetallischer Kern für Kolbenpumpen - Filter mitauswechselbarer Patrone auf der Ansauglinie – ÜberlaufRohr nach Unten verstellbar – Ventil mit drei WegenØ 45 mit Nippel in Messing UNI 804 für Füllungaußerhalb des Tankes oder Füllung von Tankwagen oderHydrant – Wasserspiegel mit kommunizierenden Rohren- Mannloch Ø 330 für Innenkontrolle – manuellesGaspedal – Schlüssel für Anlassen und Anhalten –zweiter Auslass schon vorgesehen und komplett mitschnellen Verbindungsstücken – Speisungsventil für denHauptschlauch und zweiter Auslass – Hebel fürEinrückung, Ausrückung und Druckregelung – Ventilfür Druckregelung – Manometer für Druckanzeige –6Mt. Spiralrohr für Ansaugung mit Bodenventil inMessing UNI 25 – Ventil für untere Dränierung – mehrereVerbindungsnippeln mit der Pumpengruppe –Gebrauchs- und Verha l tungsanweisungen.
22
HIGH PRESSURE KITS KEVLAR “L” SHAPED
HOCHDRUCK ANLAGE ESK KEVLAR “L” FÖRMIG
PRFV tanks Kevlar-CarbonTanke in PRFV Kevlar-Karbonium
Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
KKevlar
LShapeForm
035040050060
350 Lt.400 Lt.500 Lt.600 Lt.E
MTP
50
51
52
53
05013801070860140
13801070860175
13801070860165
13801070860178
13801070860174
13801070860187
13801070860175
04010301010102012210301060102015710301010102014710301060102016010301010102015610301060102016910309001020157
03511701010860117
1170800860152
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
06013801070860125138010708601561380107086014313801070860163138010708601451380107086018413801070860187138010708602011380107086015013801070860174
05013801070860125138010708601561380107086014313801070860163138010708601451380107086018413801070860187138010708602011380107086015013801070860174
04010309601020107103096010201381030960102012510309601020145103096010201271030960102016610309601020169103010601020183103010101020132103010101020156
035117096086010211709608601331170960860120117096086014011709608601221170960860161
1170101086012711701010860151
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
06013801070860140
13801070860175
13801070860165
13801070860178
13801070860174
13801070860187
13801070860175
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
23
FIRECO STAINLESS STEEL TANKS
TANKE AUS EDELSTAHL FIRECO
The stainless steel tanks AISI 304 (availablealso in stainless steel AISI 316 for aliments)stiffen, “L” or “T” shaped, have a plating of2 mm thickness, reinforced with particular ribsfixed on the inner side of the structural points,complete with breakwater bulkheads in orderto make the structure more rigid and to permiteasy and safe transport. Available in theversions of 350, 400, 450, 500, 550, 600 and1000 Lt (cube shaped).It is possible to combine with pump groupsof: 50, 70, 80 and 100 Lt/min. at 40 and 50Bar – 135 Lt./min. at 20 bar - 42 Lt/min. at 100and 150 Bar with petrol engines standardfrom 9, 13 and 18 HP and diesel engines of10, 11, 12, 15 and 19 HP. Kits complete with:n° 1 gun with switch for full or nebulized jetwith capacity 40 Lt./min. – steel hose reel 50m tube PVC for diaphragms pumps and tubeR1 metallic core for piston pumps - filter withinterchangeable cartridge on the aspirationline – down adjustable overflow pipe – threeway valve Ø 45 with brass UNI 804 connectorfor external priming or filling from a tanktruck or from a fire hydrant – level atcommunicating vessels - manhole Ø 330 forinternal inspection – manual accelerator –starting and stopping – second deliveryalready installed and complete with quickcoupling – feeding valve of the principal hosereel and second delivery – connection,disconnection and pressure regulation lever– pressure regulation valve – pressurevisualizing manometer – spiraled aspirationreel 6 m with brass UNI 25 bottom valve –lower draining valve – various junctions forconnection with the pump group – Use andmaintenance instructions.
Die Edelstahl Tanke AISI 304 (erhältlich auch in den speziellen Versionen in Edelstahl AISI 316für Nahrungsmittel) versteift, mit “L” oder “T” Form, haben eine 2mm Wandstärke, verstärkt mitspezialen Rippen die im Inneren an die strukturellen Punkten fixiert sind, und sind komplett mitWellenbrecher für eine Struktursolidität und für einen leichten und sicheren Transport. Erhältlichmit einem Inhalt von 350, 400, 450, 500, 550, 600, und 1000 Lt (Würfelförmig).Man kann dazu Motorpumpen von 50, 70, 80 und 100 Lt/Min. - 40 und 50 Bar – 135 Lt./Min. - 20bar - 42 Lt/Min. - 100 und 150 Bar koppeln mit Benzinmotoren Standard von 9, 13 und 18 PS undDieselmotoren von 10, 11, 12, 15 und 19 PS. Anlage komplett mit: einer Pistole für Voll und NebelStrahl mit 40Lt./Min. Leistung – Stahlschlauch mit 50m Rohr in PVC für Membranpumpen undRohr R1 mit metallischer Kern für Kolbenpumpen - Filter mit auswechselbarer Patrone auf derAnsauglinie – Überlauf Rohr nach Unten verstellbar – drei Weg Ventil Ø 45 mit Nippel in MessingUNI 804 für Füllung außerhalb des Tankes oder Füllung von Tankwagen oder Hydrant – Wasserspiegelmit kommunizierenden Rohren - Mannloch Ø 330 für Innenkontrolle – manuelles Gaspedal –Schlüssel für Anlassung und Anhalten – zweiter Auslass schon vorgesehen und komplett mitschnellen Kupplungen – Einspeisungsventil für den Hauptschlauch und zweiter Auslass – Hebelfür Einrückung, Ausrückung und Druckregelung – Ventil für Druckregelung – Manometer fürDruckanzeige – 6Mt. Spiralrohr für Ansaugung mit Bodenventil in Messing UNI 25 – Ventil füruntere Dränierung – mehrere Verbindungsnippeln mit der Pumpengruppe – Gebrauchs- undVerhaltungsanweisungen.
24
HIGH PRESSURE KITS ESK INOX “L” AND “CUBE” SHAPED
HOCHDRUCK ANLAGE ESK INOX “L” UND “WÜRFEL” FÖRMIG
MTP
50
51
52
53
10015501400900213
15501400900248
15501400900238
15501400900251
15501400900247
15501400900260
14701400900248
060122510101020209
122510601020244
122510101020234
122510601020247
122510101020243
122510601020256
1225800
1020244
050109510101020198
109510601020233
109510101020223
109510601020236
109510101020232
109510601020245
1095800
1020233
040965
10101020187965
10601020222965
10101020212965
10601020225965
10101020221965
10601020234965800
1020222
03596510108001709651060800205
965800800205
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
10015101400900198155014009002291510140090021615501400900236151014009002191550140090025715101400900261155014009002741510140090022315501400900247
060122596010201941225960102022512259601020212122596010202321225960102021512259601020253122510601020257122510101020270122510101020219122510101020243
050109596010201831095960102021410959601020201109596010202211095960102020410959601020242109510601020246109510601020259109510101020208109510101020232
04096596010201729659601020203965960102019096596010202109659601020193965960102023196510601020235965106010202489651010102019796510101020221
035965960800155965960800186965960800173965960800193965960800176965960800214
96510108001809651010800204
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
Motor pump*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
IStainless steel
Edelstahl
304Lstandard
AStainless steel
Edelstahl
316Loptional
LShapeForm
035040050060
100
350 Lt.400 Lt.500 Lt.600 Lt.
1000 Lt.
E
Stainless steel tanks Aisi 304L- 316LEdelstahl Tanke Aisi 304L- 316L
CShapeForm
The dimensions and weights refer only to tanks “L”shaped, except of tanks 1000 Lt that are available onlyfor tanks “cube” shaped.
Die in der Tabelle angegeben Dimensionen und Gewichtebetreffen sich nur auf die Hochdruck Anlagen mit “L”förmigen Tank, außer Tanke 1000 l, die nur “Würfel”förmig erhältlich sind.
*ATTENTION: The max. capacities of the motor pump groups are intended to be separated and individually on the pump outlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzeln und getrennt in Ausgang vor dem Sammelanschluss zu verstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
TShapeForm
035040045050055060
350 Lt.400 Lt.450 Lt.500 Lt.550 Lt.600 Lt.
E
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A.: not available / N.E.: nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
25
HIGH PRESSURE KITS ESK STAINLESS STEEL “T” SHAPED
HOCHDRUCK ANLAGE ESK INOX “T” FÖRMIG
MTP
50
51
52
53
06015501450570206
15501450570241
15501450570231
15501450570244
15501450570240
15501450570253
14701450570241
05515001450570196
15001450570231
15001450570221
15001450570234
15001450570230
15001450570243
14201450570231
04514001450570183140014505702181400145057020814001450570221140014505702171400145057023013201450570218
04014401450503177144014505582121440145053520214401450558215144014505352111440145055822413601450503212
0351340145050316913401450558204
12601450503204
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
B13 hp
MTP
01
02
03
04
05
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
05014501450570189
14501450570224
14501450570214
14501450570227
14501450570223
14501450570236
13701450570224
Motor pump*/Motorpumpe*Stainless steel tanks Aisi 304L- 316LEdelstahl Tanke Aisi 304L- 316L
05514601450570181150014505702121460145057019915001450570219146014505702021500145057024014601450570244150014505702571460145057020615001450570230
05014101450570174145014505702051410145057019214501450570212141014505701951450145057023314101450570237145014505702501410145057019914501450570223
04513601450570168140014505701991360145057018614001450570206136014505701891400145057022713601450570231140014505702441360145057019314001450570217
04014001450480162
14401450568193
14001450503180
14401450568200
14001450503183
14401450558221
14001450535225
14401450558238
14001450480187
14401450568211
035130014504801541340145056818513001450503172134014505681921300145050317513401450558213
1300145048017913401450568203
06015101450570191155014505702221510145057020915001450570229151014505702121550145057025015101450570254155014505702671510145057021615501450570240
IStainless steel
Edelstahl
304Lstandard
AStainless steel
Edelstahl
316Loptional
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
N.A.N.E.
26
FIRECO’S MOTOR PUMP GROUPS
MOTORPUMPEN FIRECO
The high pressure motor pumps can be combined with or without a tank. Available in the versions of 50, 70,80 and 100 Lt/min. at 40 and 50 Bar – 135 Lt./min. at 20 bar - 42 Lt/min. at 100 and 150 Bar with petrol engines9, 13 and 18 HP and diesel engines 10, 11, 12, 15 and 19 HP. Standard they are without hose reel, with highpressure tube and high pressure gun. The width has to be increased of 29mm in case of coupling with a fixedsteel hose reel complete with 50m hose.
Die Hochdruckmotorpumpen kann man mit einem Tank gekoppelt oder Autonom benutzen. Erhältlich inden Versionen von 50, 70, 80 und 100 Lt/Min. bei 40 und 50 Bar – 135 Lt./Min. bei 20 bar - 42 Lt/Min. bei 100und 150 Bar mit Benzinmotoren von 9, 13 und 18 PS und Dieselmotoren von 10, 11, 12, 15 und 19 PS. In derStandard Version werden diese ohne Hochdruckschlauch und ohne Hochdruckpistole geliefert. Die BreiteL2 ist um 290mm größer wenn mit fixer Spule mit 50mt Schlauch gekoppelt.
*ATTENTION: The max. capacities of the motor pump groupsare intended to be separated and individually on the pumpoutlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzelnund getrennt in Ausgang vor dem Sammelanschluss zuverstehen.
NOTES/LEGENDEN.A. : not available / N.E. : nicht erhältlichDimensions / Dimensionen L1, L2 e h : mmWeight / Gewicht: Kg
Motor pump groups*/Motorpumpe*
010203040550515253
B..hpPetrolBenzin
050070080100135042042034042
040040040050020100150170
100 Deluxe
D..hpDieselDiesel
MTP
50
51
52
Dim.
58072050381
580770558116580720535106580770558119580720535115580770558128
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B13 hp
D15 hp
B18 hp
D19 hp
B18 hp
D19 hp
MTP
01
02
03
04
05
Dim.
54067047066
58067056897
54067050384
580670568104
54067050387
58067055811354077053512958077055814254072047091
580720568115
L1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hpL1
L2
hp
Alim.
B9 hp
D10 hp
B13 hp
D11 hp
B13 hp
D12 hp
B18 hp
D19 hp
B9 hp
D10 hp
27
PATENTED FOAM MIXING SYSTEM
PATENTIERTES SCHAUMVORMISCHUNGSSYSTEM
53B-1
53B-2
53B-3
53B-4
MODELMODELL
PUMP*PUMPE*
MOTOR ENGINEMOTOR BENZIN
FHP SYSTEMFHP SYSTEM
DIMENSIONSDIMENSIONEN
HOSE 50M R1 10x17SCHLAUCH 50M R1 10x17
DRY WEIGHTLEER GEWICHT
42 Lt./min. a 100 barDELUXE
Brigss & Stratton13 HP
WITHOUTOHNE
WITHOUTOHNE 116 Kg 500 x 800 x 503h mm
42 Lt./min. a 100 barDELUXE
Brigss & Stratton13 HP
WITHMIT
WITHOUTOHNE 148 Kg 500 x 800 x 840h mm
42 Lt./min. a 100 barDELUXE
Brigss & Stratton13 HP
WITHOUTOHNE
WITHMIT 116 Kg 500 x 800 x 503h mm
42 Lt./min. a 100 barDELUXE
Brigss & Stratton13 HP
WITHMIT
WITHMIT 148 Kg 500 x 800 x 840h mm
*ATTENTION: The max. capacities of the motor pump groups areintended to be separated and individually on the pump outlet
*A.B. Die max. Leistungen der Pumpen Gruppen sind einzeln undgetrennt in Ausgang vor dem Sammelanschluss zu verstehen.
HIGH PRESSURE PISTON MOTOR PUMP 42 LT./1’ 100 BAR DELUXEHOCHDRUCK MOTORPUMPE MIT KOLBEN 42 L /1’ 100 BAR DELUXE
This group, available only with the petrol engine, has been designed tobe a more compact version, adapted for mounting inside the fire fightingvehicle. It allows installation of high pressure on vehicles that are notequipped with it. The fairing of the motor pump and of the controlboard has greatly improved the appearance. The motor pump can becombined with the patented Fireco foam system. Available with fixedhose, without hose, and with or without a PRFV tank.
Diese Motorpumpe, nur in Benzin, wurde speziell als eine kompakteVersion entwickelt, geeignet für die Montage in Fahrzeuginnerenund erlaubt Hochdruck auch auf Fahrzeugen die nicht damit vorsehensind, zu benutzen. Das Gehäuse der Motorpumpe und der Schalttafelhaben das Aussehen sehr verbessert. Die Motorpumpe kann mit dempatentierten Schaumvormischer von Fireco ausgestattet werden.Erhältlich in den Versionen mit festen Schlauch, ohne Schlauch, mitoder ohne Glasfaser Tank.
28
AC.00.001
AC.00.002
AC.00.003
AC.00.004
AC.00.005
AC.00.006
AC.05.001
AC.05.002
AC.05.003
AC.05.004
AC.10.001
AC.10.002
ACCESSORIES FOR FIRECO PRFV STANDARD HIGH PRESSURE KITS, PRFVKEVLAR-CARBON, STAINLESS STEEL AND PUMP GROUPS
ZUBEHÖRE FÜR HOCHDRUCK ANLAGEN PRFV STANDARD, PRFVKEVLAR-KARBONIUM, EDELSTAHL UND MOTORPUMPEN GRUPPEN
EACH HIGH PRESSURE KIT CAN BE EQUIPPED WITH:ALLE HOCHDRUCK ANLAGEN KÖNNEN MIT DEN FOLGENDEN ZUBEHÖREN AUSGESTATTET WERDEN:
High pressure water gun with quick coupling
Hochdruck Pistole Wasser mit schnell Kupplung
High pressure water gun 200 BAR nozzle M15 x 1 Ø1,5 mm
Hochdruck Pistole Wasser 200 BAR Düse M15 x 1 Ø1,5 mm
High pressure water/foam gun with quick coupling up to 200 bar
Hochdruck Pistole Wasser/Schaum mit schnell Kupplung bis 200 bar
High pressure water/foam gun with quick coupling up to 200 barcomplete with distributor for medium expansion with patented FHPsystem
Hochdruck Pistole Wasser/Schaum mit schnell Kupplung bis 200 barspeziell komplett mit Diffuser - mittel Ausbreitung für patentiertesFHP System
Distributor for HIGH expansion with patented FHP system
Diffuser - hohe Ausbreitung für patentiertes FHP System
Brush with long handle for cleaning kit
Bürste mit langem Griff für Reinigung
Adjustable foam proportioner for kits, complete with 1 water/foam nozzle for
membrane and piston pumps
Schaumvormischer regulierbar für Geräte mit einer Wasser/Schaum Pistole für
Membran- und Kolbenpumpen
Patented FHP system for correct mixing. Includes 200m tube with different Ø complete with water/foamgun NEW
Patentiertes System FHP für korrekte Mischung auch mit Rohr 200m mit verschiedenen Ø komplett mitPistole Wasser/Schaum NEU
Special structure for kits with foam agent tank on the structure
type Roma
Halter für Schaummittelkanister auf der gleichen Anlage - Typ Roma
Foam agents tank capacity from 30 Lt. to 50 Lt. max internal to the standard tank for all capacities (deduct
the foam agent tank capacity from the total standard tank capacity)
Schaummittel Tank mit einem Inhalt von 30 Lt. bis 50 Lt. Max., im inneren des Standard Tankes für alle
Leistungen (Der Inhalt des Standard Tanks mindert mit den Inhalt des Schaummitteltanks)
Aspiration kit complete with 6 m spiralled tube for aspiration Ø25 with base valve UNI25
Ansauge Ausstattung mit 6 m Ansaugspiralrohr Ø25 mit Bodenventil UNI25
Aspiration kit complete with 6 m spiralled tube for aspiration Ø45 with base valve UNI45
Ansauge Ausstattung mit 6 m Ansaugspiralrohr Ø45 mit Bodenventil UNI45
29
Ejector/quick emptying system of the basements with tubes 10m
for MEMBRANE PUMPS 50/40 and 70/40
Ejektor/rapides System für Keller Leerung mit Schläuche 10 m für
Kolben Pumpen 50/40 und 70/40
Ejector/quick emptying system of the basements with tubes 10 m
for MEMBRANE PUMPS 80/40, 100/50 and 135/20
Ejektor/rapides System für Keller Leerung mit Schläuche 10 m für
Kolben Pumpen 80/40, 100/50 und 135/20
Ejector/quick emptying system of the basements with tubes 10 m
for PISTON PUMPS
Ejektor/rapides System für Keller Leerung mit Schläuche
10 m mit Kolben Pumpen
Extra price for 100 m tube in PVC instead of 50 m on principalhose reelZusatzpreis für 100 m PVC Schlauch in Stelle von den 50 m Schlauch
Extra price for additional meter of tube PVC 10 x 17 on hose
reel 50/100 m fix/transportable
Zusatzpreis für jedes Meter mehr Rohr PVC 10 x 17 auf
festen/transportierbaren Schlauch 50/100 m
Extra price for additional meter of tube PVC 13 x 21 on hose
reel 50/100 m fix/transportable
Zusatzpreis für jedes Meter mehr Rohr PVC 13 x 21 auf
festen/transportierbaren Schlauch 50/100 m
Extra price for additional meter of tube 13 x 21 on
fixed/transportable hose reel instead of standard PVC 10x17
Schlauchvariante PVC 13x21 auf Spule anstatt des Schlauchs
in PVC 10x17
Extra price for tube R1 metallic core 10x17 on fix hose reel instead
of standard PVC 10x 17
Schlauchvariante R1 metallischen Kern 10x17 auf Spule anstatt des
Schlauchs in PVC 10x17
Extra price for additional meter of tube R1 metallic core 10 x 17 on
hose reel 50/100 m fix/transportable
Zusatzpreis für jedes Meter mehr Rohr R1 metallischer Kern 10 x 17
auf festen/transportierbaren Schlauch 50/100 m
Extra price for additional meter of tube R1 metallic core 13 x 20 on
hose reel 50/100 m fix/transportable
Zusatzpreis für jedes Meter mehr Rohr R1 metallischer Kern 13 x 20
auf festen/transportierbaren Schlauch 50/100 m
Extra price for every m more tube R1 metallic core 13 x 20 onfix/transportable hose reel instead of standard PVC 10x 17Zusatzpreis für jedes Meter mehr Rohr R1 metallischer Kern 13 x 20auf festen/transportierbaren Schlauch anstatt des Schlauchs in PVC10x17
Hose reel structure in steel/plastic with horizontal development, fixings and handle WITHOUT TUBE
Spule in Stahl/Plastik Horizontale Entwicklung mit Anschlüsse und Kurbel ohne Schlauch
Hose reel structure in steel with VERTICAL development, fixings and handle WITHOUT TUBE
Spule in Stahl vertikale Entwicklung mit Anschlüsse und Kurbel ohne Schlauch
Hose reel structure in ALLUMINIUM with fixings and handle for lodging 50m WITHOUT TUBE
Spule in Stahl mit Anschlüsse und Kurbel für 50 m Schlauch (Schlauch nicht einbegriffen)
AC.10.003
AC.10.004
AC.10.005
AC.15.001
AC.15.002
AC.15.003
AC.15.004
AC.15.010
AC.15.011
AC.15.012
AC.15.013
AC.20.001
AC.20.002
AC.20.003
30
Hose reel structure in ALLUMINIUM with fixings and handle for lodging 100m WITHOUT TUBE
Spule in Stahl mit Anschlüsse und Kurbel für 100 m Schlauch (Schlauch nicht einbegriffen)
Transportable hose reel ABS 50 m tube PVC 10x17 with quick couplings for 2nd user
Tragbare Spule mit Schlauch ABS 50 Mt. Schlauch PVC 10x17 mit schnellen Anschlüssen für zweiten Benutzer
Transportable hose reel ABS 50 m tube R1 metallic core 10x17 with quick couplings for 2nd userTragbare Spule mit Schlauch ABS 50 Mt. Schlauch R1 metallischen Kern 10x17 mit schnell Kupplung fürzweiten Benutzer
Transportable steel hose reel 50 m tube PVC 10x17 with quickcouplings for 2nd userTragbare Edelstahl Spule mit Schlauch 50 Mt. Schlauch PVC 10x17mit schnell Kupplung zweiten Benutzer
Transportable steel hose reel 50 m tube R1 metallic core 10x17 withquick couplings for 2nd userTragbare Edelstahl Spule mit Schlauch 50 Mt. Schlauch R1metallischen Kern 10x17 mit schnell Kupplung für zweiten Benutzer
Transportable steel hose reel 100 m tube PVC 10x17 with quickcouplings for 2nd userTragbare Edelstahl Spule mit Schlauch 100 Mt. Schlauch PVC 10x17mit schnell Kupplung für zweiten Benutzer
Transportable steel hose reel 100 m tube R1 metallic core 10x17with quick couplings for 2nd userTragbar Edelstahl Spule mit Schlauch 100 Mt. Schlauch R1metallischen Kern 10x17 mit schnell Kupplung für zweiten Benutzer
Transportable aluminium hose reel 50 m tube PVC 10x17 withquick couplings for 2nd userTragbare Aluminium Spule für 50 Mt. PVC 10x17 mit schnellKupplung für zweiten Benutzer
Transportable aluminium hose reel 50 m tube R1 metallic core10x17 with quick couplings for 2nd userTragbare Aluminium Spule 50 Mt. Schlauch R1 metallischen Kern10x17 mit schnell Kupplung für zweiten Benutzer
Transportable aluminium hose reel 100 m tube PVC 10x17 withquick couplings for 2nd userTragbare Aluminium Spule 100 Mt. PVC 10x17 mit schnellKupplung für zweiten Benutzer
Transportable aluminium hose reel 100 m tube R1 metallic core10x17 with quick couplings for 2nd userTragbare Aluminium Spule 100 Mt. R1 metallischen Kern mitschnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 50m tube PVC 10x17 withquick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 50 Mt. Schlauch PVC 10x17mit schnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 50mt tube R1 metalliccore 10x17 with quick couplings for 2nd use2° feste Stahl Spule auf Anlage mit Spule 50 Mt. Schlauch R1metallischen Kern 10x17 mit schnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 100m tube PVC 10x17with quick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 100 Mt. Schlauch PVC10x17 mit schnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 100m tube R1 metallic core10x17 with quick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 100 Mt. Schlauch R1metallischen Kern 10x17 mit schnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 50m tube PVC 10x17 withquick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 50 Mt. Schlauch PVC 10x17mit schnell Kupplung für zweiten Benutzer
2° steel hose reel fixed on the kit 50m tube R1 metallic core10x17 with quick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 50 Mt. Schlauch R1 metallischenKern 10x17 mit schnell Kupplung für zweiten Benutzer
2° aluminium hose reel fixed on the kit 100m tube PVC 10x17with quick couplings for 2nd user2° feste Aluminium Spule auf Anlage mit 100 Mt. SchlauchPVC 10x17 mit schnell Kupplung für zweiten Benutzer
2° aluminium hose reel fixed on the kit 100m tube R1 metalliccore 10x17 with quick couplings for 2nd user2° feste Stahl Spule auf Anlage mit 100 Mt. Schlauch R1metallischen Kern 10x17 mit schnell Kupplung für zweiten Benutzer
AC.20.004
AC.20.010
AC.20.011
AC.20.012
AC.20.013
AC.20.014
AC.20.015
AC.20.016
AC.20.017
AC.20.018
AC.20.019
AC.20.030
AC.20.031
AC.20.032
AC.20.033
AC.20.034
AC.20.035
AC.20.036
AC.20.037
31
Mounting of the hose reel structure ELECTRIC 52C 0,16 KW 12 V 40turns/min. in steel WITHOUT TUBE capacity 80 m Ø17 and 50 m Ø21Montage der elektrischen Spule 52C 0,16 kW 12 V 40Umdrehung/Min. in Stahl ohne Schlauch für 80 m Ø17 oder50 m Ø21 Schlauch
Mounting of the hose reel structure ELECTRIC 102C 0,16 KW12 V 40 turns /min. in steel WITHOUT TUBE capacity 150 mØ17 and 100 m Ø21Montage der elektrischen Spule 102C 0,16 kW 12 V 40Umdrehung/Min. in Stahl ohne Schlauch für 150 m Ø17 oder100 m Ø21 Schlauch
Mounting of the hose reel structure HYDRAULIC 52H 40 lt./min.180 bar in steel WITHOUT TUBE capacity 80 m Ø17 and 50 m Ø21Montage der hydraulischen Spule 52H 40 Lt./Min. 180 bar in Stahlohne Schlauch für 80 m Ø17 oder 50 m Ø21 Schlauch
Mounting of the hose reel structure HYDRAULIC 102H 40 lt./min.180 bar in steel WITHOUT TUBE capacity 150 m Ø17 and 100 m Ø21Montage der hydraulischen Spule 102H 40 Lt./Min. 180 bar in Stahlohne Schlauch für 150 m Ø17 oder 100 m Ø21 Schlauch
Complete control board for high pressure kits and pump groups
with MEMBRANE pumps
Komplette Bedienung für Anlagen und Membranen Motorpumpen
Complete control board for high pressure kits and pump groups
with PISTON pumps
Komplette Bedienung für Anlagen und Kolben Motorpumpen
Patented automatic accelerator on high pressure kits with
membranes NEW
Patentierter automatischer Beschleuniger auf Hochdruck
Pumpen mit Membranen NEU
Electrical level system for automatic turn off of the dry water tank engine for petrol motor pump groups
(without tank)
Elektrische Niveaumessung für automatische Motor Abschaltung bei leerem Tank für Benzin
Pumpengruppen (ohne Tank)
Electrical level system for automatic turn off of the dry water tank engine for diesel motor pump groups
(without tank)
Elektrische Niveaumessung für automatische Motor Abschaltung bei leerem Tank für Diesel
Pumpengruppen (ohne Tank)
Electrical level system for automatic turn off of the dry water tank engine for petrol motor pump groups
(with tank)
Elektrische Niveaumessung für automatische Motor Abschaltung bei leerem Tank für
Hoch Druck Anlagen Benzin (ohne Tank)
Electrical level system for automatic turn off of the dry water tank engine for diesel motor pump groups
(with tank)
Elektrische Niveaumessung für automatische Motor Abschaltung bei leerem Tank für
Hoch Druck Anlagen Diesel (ohne Tank)
Utility light 12V 55W
Spot 12V 55W
Utility light 12V 55W complete with telescopic bar
Spot 12V 55W komplett mit Teleskop Stange
AC.20.038
AC.20.039
AC.20.040
AC.20.041
AC.25.001
AC.25.002
AC.25.003
AC.25.004
AC.25.005
AC.25.006
AC.25.007
AC.25.008
AC.25.009
32
Kit tank in stainless steel AISI 316 L instead of standard stainless steel AISI 304
Hoch Druck Anlage Tank in Edelstahl AISI 316 “L” förmig anstatt Standard Edelstahl AISI 304
Motor pump group frame structure removable from the fire fighting kit
Motorpumpen auf Rahmen voN Anlage trennbar
Guides in metal or stainless steel for the gliding of the 400lt kits
Leitungen in Metall oder Edelstahl für Gleitung der Anlagen 400 Lt.
Guides in metal or stainless steel for the gliding of the 600lt kits
Leitungen in Metall oder Edelstahl für Gleitung der Anlagen 600 Lt.
Guides in metal or stainless steel for the gliding of the 800lt kits
Leitungen in Metall oder Edelstahl für Gleitung der Anlagen 800 Lt.
Sledge complete with bearings and quick unlocking for gliding
of the kit 400 Lt. (until ending of the stock)
Schlitten komplett mit Luftpolster und schneller Freigabe für
Leitung der Anlagen 400 Lt.
N° 4 big metal feet adjustable and sliding for gliding of the
kits 1500, 2000 and 2500 Lt.
4 regulierbar und ausfahrbar Stabilisationsfüße auf Anlage
mit 1500, 2000 und 2500 Liter
Equalizer complete with 4 ropes with spring catches
for vertical gliding
Schwinghebel mit 4 Seile mit Schnappring für
vertikalen Transport
FIRECO structure for heliborne max. 750 Kg
FIRECO Struktur für Hubschrauber Transport Max 750 Kg
FIRECO structure for heliborne max. 1250 Kg
FIRECO Struktur für Hubschrauber Transport Max1250 Kg
FIRECO structure for heliborne max. 1750 Kg
FIRECO Struktur für Hubschrauber Transport Max1750 Kg
FIRECO structure for heliborne max. 3500 Kg
FIRECO Struktur für Hubschrauber Transport Max 3500 Kg
Platform trailer max. capacity 600 Kg (PTT 750 Kg)test IGMCTC extraAnhänger mit Plattform max. Tragfähigkeit600 Kg (PTT 750 Kg) Prüfung IGMCTC extra
Platform trailer appendix max. capacity 500 Kg (PTT 600 Kg)without testAnhänger mit Plattform max. Tragfähigkeit500 Kg (PTT 600 Kg) ohne Prüfung
Platform trailer max. capacity 810 Kg (PTT 1000 Kg)test IGMCTC extraAnhänger mit Plattform max. Tragfähigkeit810 Kg (PTT 1000 Kg) Prüfung IGMCTC extra
Platform trailer max. capacity 1210 Kg (PTT 1400 Kg)test IGMCTC extraAnhänger mit Plattform max. Tragfähigkeit1210 Kg (PTT 1400 Kg) Prüfung IGMCTC extra
AC.25.020
AC.30.001
AC.30.002
AC.30.003
AC.30.004
AC.30.005
AC.30.006
AC.30.007
AC.35.001
AC.35.002
AC.35.003
AC.35.004
AC.35.005
AC.35.006
AC.35.007
AC.35.008
33
HIGH PRESSURE PIPELINES CHARACTERISTICS
EIGENSCHAFTEN DER HOCHDRUCK ROHRLEITUNGEN
HIGH PRESSURE PIPELINES PVCHOCHDRUCK ROHRLEITUNG IN PVC
The high pressure pipes are composed of: internal hose (underlay) sleek in blackPVC, reinforced with high resistant polyester fibres, external covering sleek in blackPVC, sleek surface. Working temperatures -5°C/+60°C.
Hochdruck Rohrleitungen bestehend aus: inneres Rohr (untere Schicht) glatt inschwarzen PVC, Verstärkung mit Einführungen von sehr Widerstandfähigen PolyesterFibern, äußere Abdeckung in schwarzen und glatten PVC, glatte Oberfläche.Arbeitstemperaturen -5°C/+60°C.
PVC 10x17 3/8”
PVC 13x21 1/2”
Nominale Ønominal Ø
(inch)
Internal Øinnen Ø(mm)
External Øaußen Ø
(mm)
Working pressureArbeitsdruck
(bar)
Burst pressureExplosionsdruck
(bar)
WeightGewicht
Kg/m
10
13
17
21
100
100
240
240
0,287
0,385
High pressure pipes composed of: underlay in synthetic rubber, oil resistant, reinforcewith steel plait with high load and black covering in oil and atmospheric conditionsresistant rubber. Working temperatures -40°C/+100°C with peaks of +125°C.
Hochdruck Leitung bestehend aus: untere Schicht in Kunstkautschuk, den Ölenwiderstandsfähig, verstärk mit Hochladungs- Stahlflechte und schwarzer Abdeckungin Gummi, widerstandsfähig gegen Öle und Wetterlagen. Arbeitstemperaturen -40°C/+100°C mit Spitzen von +125°C.
R1 10x17 3/8”
R1 13x21 1/2”
Nominale Ønominal Ø
(inch)
Internal Øinnen Ø(mm)
External Øaußen Ø
(mm)
WeightGewicht
Kg/m
9,5
12,8
15,1
18,2
180
160
130
180
0,350
0,450
Reinforce ØVerstärkung Ø
(mm)
Workingpressure
Arbeitsdruck (bar)
17,1
20,2
Burstpressure
Explosionsdruck(bar)
Min. radiumcurving
Rayon min.courbure
(mm)
720
640
HIGH PRESSURE PIPELINES USE DIRECTIONSGEBRAUCHSANLEITUNGEN FÜR HOCHDRUCK LEITUNGEN
PVC 10x17 • • x
PVC 13x21 o o + x
R1 10x17 o o •
R1 13x20 o o o
High pressare pipelinescharacteristics
Eigenschaften HochdruckLeitungen
Membrane pumpsMembranenpumpe
50-40, 70-40
Membrane pumpsMembranenpumpe
80-40, 100-50, 135-20
Piston pumpsKolbenpumpe
Legend/Legende
• standard/serienmäßig o optional/optional x not available/nicht vorgesehen + recommended/empfohlen
HIGH PRESSURE PIPES R1 METALLIC COREHOCHDRUCK LEITUNGEN R1 MIT METALLISCHER KERN
34
The regulations bind every constructor of high pressure kits to provide also:- CE CONFORMITY CERTIFICATE AND GUARANTEE CERTIFICATE- USE AND MAINTENANCE INSTRUCTIONS- CATALOGUE/SPARE PARTS EXPLODED VIEWSFIRECO is one of the few companies that respects these regulations and guaranties the interchangeability of thepieces, in the respect of the regulation ISO 9001-20001, and the availability of the spare parts for 10 years.
Laut der geltenden Gesetze müssen alle Hochdruckanlagen Hersteller folgendes liefern:- CE KONFORMITÄTSZERTIFIKAT UND GARANTIEZERTIFIKAT- GEBRAUCHS- UND INSTANDHALTUNGS- ANWEISUNGEN- KATALOG/EXPLOSIONSZEICHNUNGENFIRECO ist eine der wenigen Firmen die alle Gesetze respektiert, die auswechselbare Teile über die Zeit liefert,die ISO 9001-20001 Rechtsvorschreiben respektiert und die Ersatzteile für 10 Jahre lang liefert.
HIGH PRESSURE KITS AND MOTORPUMP GROUPS EXPLODED VIEWS
EXPLOSIONSZETCHNUNGEN DER HOCH DRUCK ANLAGEN UND MOTORPUMPEN GRUPPEN
NOTE GENERALI / GENERELLE HINWEISE
ADVERTISMENTSFireco has the right to modify and vary the products without giving notice, in order to improve the products. On demandsome of the products are available out of standard. Eventual changes due to different producing lots can not be cause ofcomplaining. Any total or partial reproduction of our photos, mark, drawing, table, general information or every other contentis strictly forbidden and will be pursued.
GUARANTYThe quality of our products is highly guarantied. Defective products will be replaced or repaired in guaranty; normal usage,incorrect use and intentional misuse are not covered by guaranty.
GENERAL DIRECTIONSAny total or partial reproduction is strictly forbidden.Fireco has the right to modify and vary the products without giving notice, in order to improve its products.Fireco can exclude some of its products form the productions or market without giving notice.The references to laws and regulations are in no way contractual obligations.Dimensions and weights are approximate and non-bindingThe directions, prohibitions and instructions present in this catalogue and concerning the security of the user are onlycounsels and aren’t in any way to be intended as laws or regulations.The measurements, weights and capacities of the products are only indicative and can be varied without giving notice.The present catalogue overrules every pervious one.
WARNUNGENDie Firma Fireco, mit dem stetigen Bestreben nach Verbesserung, behält sich vor, ohne Ankündigung an ihrenProdukten Änderungen vorzunehmen. Auf Nachfrage sind sämtliche Produkte auch außer Standard Versionerhältlich. Eventuelle Änderungen zwischen verschiedenen Warenposten werden nicht als Reklamationsgrundgesehen. Jede Reproduktion, weder ganz noch teilweise, mit jedem Mittel, von Photografien, Markenzeichen,Zeichnung, Tabelle, generelle Information oder andere Inhalt, ist streng verboten und wird gerichtlich verfolgt.
GARANTIEUnsere Produkte haben ein garantiertes Qualitätsniveau; defekte Produkte werden kostenlos ersetzt oderrepariert. Die Garantie schließt Probleme wegen normaler Abnutzung, oder inkorrekter Benutzung oderÄnderungen nicht ein.
GENERELLE HINWEISEJede Reproduktion, weder ganz noch teilweise, ist streng verboten.Die Firma Fireco, mit dem stetigen Bestreben nach Verbesserung, behält sich vor, ohne Ankündigung oderÄnderung an schon verkauften Produkte, an ihren Produkten Änderungen vorzunehmen.Die Firma Fireco behält sich vor ohne Ankündigung Produkte von diesel Katalog von der Herstellung oder vomMarkt abzuschaffen.Die angegeben Gesetze sind auf keiner weise Kontrakt Verpflichtung.Die Photografien könnten die realen Dimensionen der Produkte nicht korrekt wiedergebenDie angegeben Hinweisungen und Verbote für die Sicherheit der Benutzer sind nur Ratschläge und sind inkeinem Falle geltende Gesetze.Die Werte der Dimensionen, Gewichte und Leistungen sind nut hinweisend und können ohne Ankündigunggeändert werden.Diesel Katalog ersetzt und entwertet jeden Vorgehenden.