Case StudyAdelaide Entertainment Centre

LocationPhilips Lighting

Adelaide, South AustraliaLED Lighting

“We needed a tough and reliable solution that wouldn’t fail in the heat, and the ColorGraze Powercore delivered.”

Andre Tammes, Lighting Design Partnership Founding Director

Fast Facts

Industry Sector Exterior

Fixtures ColorGraze Powercore

Control Light System Manager

Electrical Installer Jones & Jones Electrical

Engineering Consultant Aurecon

Lighting Design Lighting Design Partnership

Photo Credit James Field Photography, www.jame.com.au

ColorGraze Powercore was the only LED product that could be addressed in small enough increments to provide the necessary level of visual detail required by the design.

Architecturally stunning, the recently upgraded Adelaide Entertainment Centre features an iconic 59.1 ft (18 m) high domed entry structure known as the Orb. This semi-enclosed structure is largely made up of a geodesic grid of 140 ethylene tetrafluoroethylene (ETFE) “pillows.” To give the Centre a commanding nighttime identity, international lighting design firm Lighting Design Partnership (LDP) conceptualized a breathtaking LED lighting installation for the Orb.

To create the installation’s sophisticated lighting effects, each ETFE pillow is fitted with runs of ColorGraze Powercore linear LED lighting fixtures from Philips Color Kinetics. The LED fixtures are arranged in two rows of three on opposite sides of each pillow, and are controlled using a Light System Manager LED lighting controller via an installation-wide Ethernet data network. Over 800 LED lighting fixtures are deployed throughout the Orb, for a total of over 3,500 individually controllable light addresses. The lighting system delivers a programmable selection of breathtaking colors, patterns, and animations.

A number of LED suppliers were invited to showcase their technology for the project, but only LED lighting solutions from Philips Color

Kinetics could meet the project criteria. Andre Tammes, LDP Founding Director, commented on his choice of ColorGraze Powercore: “The addressability was one of the key reasons for selecting the fixtures. It was the only LED product that allowed us to drill down to relatively small increments to provide the necessary levels of visual detail we required.” Each fixture is made up of multiple 1 ft (305 mm) addressable segments, which permits fine control of color-changing effects and pre-programmed lighting sequences. The fixtures’ addressability was particularly important from a programming perspective. “It wasn’t simply a case of duplicating programming for one pillow to the next,” said Tammes. “No two ETFE pillows are the same shape, so the dimensions of each pillow had to be taken into account when programming to achieve the desired lighting effect.”

“The robustness of the product and its ability to operate at high temperatures were key features which also contributed to its selection,” Tammes remarked. “During summer in Adelaide, temperatures can soar, and as a result it gets extremely hot up in the canopy of the Orb. Here, we needed a tough and reliable solution that wouldn’t fail in the heat, and the ColorGraze Powercore delivered.”

Philips Color Kinetics3 Burlington Woods DriveBurlington, Massachusetts 01803 USATel 888.385.5742Tel 617.423.9999Fax 617.423.9998www.philipscolorkinetics.com

Copyright © 2011 Philips Solid-State Lighting Solutions, Inc. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, ColorGraze, ColorPlay, ColorReach, iW Reach, eW Reach, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United States and / or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. Due to continuous improvements and innovations, specifications may change without notice. Photography: James Field Photography, www.jame.com.au BRO-000065-06 R00 07-11

From an installation standpoint, reliability was also a key consideration. Working at heights of up to 59.1 ft (18 m), Jones & Jones Electrical had to use cherry-pickers to install over 3,280.8 ft (1,000 m) of fixtures and cabling. “It was essential that a dependable LED system that would not require significant maintenance or upgrade was chosen — especially given the hard-to-access location of the LED fixtures,” said David Jones, Managing Director. “The maintenance requirements of the ColorGraze Powercore fixtures are negligible. It’s a real ‘fit-and-forget’ lighting solution.”

Staff can configure the LED lighting system to automatically run any combination of 60-plus pre-programmed lighting sequences and designs. Additional lighting sequences can be developed and customized for individual events and exhibitions. “Lighting sequences are really only limited by the imagination,” said Tammes. The Orb has certainly put Adelaide on the “lighting map” and is sure to serve as an inspiration for future projects across the globe.