capabilities - pandp.co.nzpandp.co.nz/pandpoil/docs/pp595.pdfprocess simulation bowtie analysis...
TRANSCRIPT
CAPABILITIES
PLANT & PLATFORM CONSULTANTS LTD NEW PLYMOUTH, NEW ZEALAND
Doc No: PP595/Rev 19
CONTENTS COMPANY PROFILE
COMPANY CONTACTS
Project Management:
Process / Safety & Risk Engineering:
Piping / Mechanical Engineering:
Pipeline Engineering:
Compression Engineering
Instrumentation / Electrical and Engineering:
Civil/Structural Engineering:
Procurement Management:
Quality Management:
Document Management:
Safety Case Preparation and Risk Mitigation:
API 653 Tank Inspection- HSWA Certification:
Bulk Storage Tank Design:
Asset Integrity:
Coal Seam Gas:
Water and Waste Water Handling:
Specialist Capability Chart:
Company Quality Certificate:
Impac Prequal Certificate:
Doc No: PP595/Rev 19
COMPANY CONTACT Office: Plant & Platform Consultants 141 Devon Street West, New Plymouth 4310, New Zealand Ph + 64 6 759 2199 Fx + 64 6 759 1139 Email [email protected] www.pandp.co.nz Contacts: Steve Blackman (Managing Director) DDI +64 6 759 5803 Mobile +64 027 481 2575 Email [email protected]
Ian Webster (Service Delivery Manager) DDI +64 6 759 5856 Mobile +64 027 241 3944 Email [email protected]
Eric van Duin (Technical Manager) DDI +64 6 759 5847 Mobile +64 027 555 8803 Email [email protected]
Doc No: PP595/Rev 19
COMPANY PROFILE
Plant & Platform Consultants Ltd (P&P) was established in 1986 to provide engineering services in the Petrochemical, Oil/Gas, Mining, Power and Fabrication Industries. In more recent times it has expanded its capabilities in Safety Management and Document Management with particular emphasis on effective risk management.
P&P as a long term provider of engineering services to companies in the energy and resources sectors has accumulated considerable knowledge of the configuration, operation and design of production systems, plants and facilities. This wealth of knowledge and experience is available to the benefit of P&P’s clients, ensuring that the client not only gets “the thing done right”, but also gets “the right thing done!”
P&P has significant history and experience in conceptual and feasibility studies, planning, budget preparation, front end engineering design, detailed engineering design, construction management, commissioning supervision and is recognised as one of New Zealand’s leading providers of these services.
P&P's personnel consist of internationally experienced professional engineers, design and technical support personnel recognized through holding appropriate certification and professional organization memberships.
The company is responsive to client needs and prides itself in being able to work innovatively alongside clients, as well as its readiness and flexibility to achieve tight schedules and provision of solutions which are “fit-for-purpose”.
P&P currently undertakes projects in New Zealand, Australia and the Pacific Islands and has previously worked in the Middle East.
The work has ranged across transmission pipelines, related oil and gas facilities, mining and materials handling, material processing, bulk storage installations and facilities. P&P also has specialist capability in Safety Management, including risk assessment and mitigation processes, inspection, Cathodic Protection and associated corrosion prevention areas. In addition, the company offers document management and procurement services to many clients.
P&P operates under an ISO 9001 accredited quality management system.
Plant & Platform Consultants Ltd
PR
OC
ES
S /
SA
FE
TY
AN
D R
ISK
EN
GIN
EE
RIN
G
Process Engineering is the cornerstone of professional services provided to the petroleum sector by P&P. The team has steadily grown in experience and size in response to the demand for high quality front-end design and value solutions to engineering challenges. The culture of excellence surrounding the process discipline inspires the team to consistently exceed expectations on projects from very small to multi-million dollars. The Process Group’s capability includes turn-key plant design, configuration, safety analysis and efficiency optimisation. The Process Group consistently adds value through their involvement in the following aspects of project development:
Concept/Feasibility studies, FEED and detailed design
HAZOP, HAZID, HAZAN and other Safety Management studies
Plant and equipment design and alterations
Process simulation
BOWTIE analysis
Quantative and Qualitative Risk Assessment
Safety Cases and Process Safeguarding
Troubleshooting and operational support
P&P Process personnel are motivated by the clients’ demand for value. As a result, the company has developed an enviable track record for satisfying the most demanding of challenges. The ability to think “outside the square” is a core strength.
AT A GLANCE: IN DEPTH:
Depth and breadth of technical knowledge with international experience
Client focussed professionals
Collaborative attitude across engineering disciplines to ensure optimum output delivery
Responsive to project challenges
Plant & Platform Consultants Ltd
With mechanical engineering having been one of the foundations of P&P’s services since its inception, it is through this discipline it established its reputation in the Oil & Gas sector. The team comprises innovative mechanical engineers and designers with proven experience in the petrochemical, oil & gas and electricity generation industries. P&P is very proud of its heritage and continues to excel in this field locally and internationally, utilising proprietary and in-house specialist software for projects involving:
Pipe stressing and analysis
3D plant modelling, stressing and FEA of vessels, plate structures and modules, draughting using AutoCAD, AutoPlant, PV Elite for pressure vessels, Intergraph Tank for tanks and other leading software
Intelligent pigging inspection
Pressure vessel design and “fitness-for-purpose” assessment
Pressure piping Design Verification for hazard level C & D
Fatigue assessment and reliability engineering of facilities
Conveyor and other materials handling plant and equipment
P&P mechanical personnel have a spectrum of industry capabilities and are leaders in their field.
AT A GLANCE: IN DEPTH:
Specific capability for oil & gas, energy, pipeline, materials handling and related industries
High quality outputs with Industry endorsed software
Teams dedicated to “everything mechanical”
Collaborative problem solving in conjunction with wider discipline groups
PIP
ING
/ M
EC
HA
NIC
AL
EN
GIN
EE
RIN
G
Plant & Platform Consultants Ltd
The successful engineering and project management of pipeline developments is a specialist area in which P&P built an enviable reputation. Irrespective of project scope or complexity, the challenge to design and install pipelines of any size, material or application drives the P&P pipeline professionals to quality outputs.
The company is proud of its reputation as onshore transmission pipeline experts and has extensive experience in the design and installation of pipeline facilities including compressor stations, metering, pig launchers, pig receivers for intelligent pigging and regulation facilities. Pipeline projects completed include multi-phase gathering lines, gas and liquid pipelines. These have been constructed from carbon steel, composites and HDPE materials. Pipelines have been completed in the Coal Seam Gas, conventional Oil & Gas and Geothermal industries. P&P has qualified staff who can undertake the following:
Pipeline Safety Management Studies
Pipeline Design: AS2885, ANSI B31.1, B31.4, B31.8, AS4130
Integrity Assurance & Intelligent Pigging Programming
Applications Include Well-stream, Geothermal, LPG, Hydrocarbon
Condensate, Potable Water, Produced Water, Steam Condensate, Brines, Bitumen
The P&P team are pipeline specialists who can be relied upon to deliver effective results, efficiently.
AT A GLANCE: IN DEPTH:
Sound technical understanding of international codes and best practice
Client focussed professionals
Collective knowledge across many industries and disciplines
Proven investigation and problem solving ability
PIP
EL
INE
EN
GIN
EE
RIN
G
Plant & Platform Consultants Ltd
P&P has undertaken concept and detailed, design and construction supervision of compression facilities for applications including transmission pipelines, gas reinjection, export gas compression and field reservoir boosting. We have successfully engineered and project managed, Reciprocating, Rotary Screw, Centrifugal and Rotary Vane compressor installations for Gas & Air in a range of sizes. Compression project experience includes:
Investigation and Performance optimisation
Restaging for Alternative Duty
Specification and Integration into Existing Facilities
Green Fields, Specification and Station Design
Fuel Gas Conditioning Systems
The P&P team are specialists who can be relied upon to deliver effective results, efficiently.
AT A GLANCE: IN DEPTH:
Sound technical understanding of international codes and best practice
Proven investigation and problem solving ability
Client focussed professionals
Collaborated problem solving in conjunction with wider discipline groups
CO
MP
RE
SS
ION
EN
GIN
EE
RIN
G
Plant & Platform Consultants Ltd
Irrespective of the application, if the situation utilises electrical power, instrumentation, communication or control systems, the P&P team of I&E engineers have the experience and capability to provide an effective solution. The team has completed successful projects in the areas of:
Process plant instrumentation, control and safeguarding systems
Hazardous area installations
Power supplies and distribution (AC & DC)
Wellsite development
Gas delivery points including metering and pressure reduction systems
On-site power generation
SIL Analysis
P&P provides clients with confidence that problems will be quickly and efficiently resolved by the I&E team, from understanding of the client’s requirements to expert analysis, through to careful design and equipment selection to ensure the best solution is adopted. In line with the fundamental principles and strategic intent of the company, I&E personnel “consistently provide excellent service” and have a comprehensive track record in “responding to client needs”.
AT A GLANCE: IN DEPTH:
Ability to work across disciplines
Wide range of industry experience
Expertise in key areas
Experienced in diverse range of projects
Client value focussed
INS
TR
UM
EN
TA
TIO
N /
EL
EC
TR
ICA
L E
NG
INE
ER
ING
Plant & Platform Consultants Ltd
A significant cross section of skills and experience resides in the Civil/Structural engineering group at P&P. The team incorporates NZ Chartered and Queensland Registered, professional engineers and delivers value in a range of areas including site development, foundation systems, structures, seismic design for equipment and structures in the oil & gas industry. An extensive suite of specialist analysis software underpins the technical expertise in areas of:
Design and verification of foundations, structures and supports
Finite Element Analysis of tanks, silos, hoppers, plate elements using STAAD.Pro V8i software
Conveyor analysis and design
Pipe support analysis and design
ProSteel 3D modelling of structures utilising STAAD.Pro outputs
Diversity in skills is the strength of the Civil/Structural team, who are committed to providing appropriate solutions. The technically diverse team draws its experience from a spectrum of industries and has accumulated engineering knowledge and experience both gained locally and internationally. P&P’s extensive track record is the result of working alongside its clients for the best possible outcome.
AT A GLANCE: IN DEPTH:
Multi-skilled Chartered Professional engineering personnel
Focussed team with experience in projects of varying size and complexity
Critical thinking and output focussed
Supported by leading
software suites
CIV
IL / S
TR
UC
TU
RA
L E
NG
INE
ER
ING
Plant & Platform Consultants Ltd
Efficient materials and equipment procurement is the lifeblood of a successful project. The procurement team has spent many years honing the necessary skills to ensure this essential element of project execution is highly efficient. With increasing demand on supply logistics around the globe, P&P personnel face and meet the constant challenges to deliver goods and materials on-time and to budget for the project. A well-developed, in-house software package ensures accurate scheduling and reporting. It also supports regular communication, to ensure interested parties are kept appraised of progress with supply of critical items. P&P is proud of its reputation for management of expediting, inspection, approval and administration of contracts for supply on behalf of its clients. P&P offers a range of procurement services that can be tailored to suit client requirements, using suppliers from an extensive database developed over many years. Recommended suppliers have been carefully identified to ensure confidence of supply in order that delivery schedules are achieved. P&P view this service as pivotal to successful project delivery.
AT A GLANCE: IN DEPTH:
Significant experience in procurement and expediting of goods and services
Extensive network of industry contacts to ensure value-for-money when purchasing
Team focus on “thinking like the client”
PR
OC
UR
EM
EN
T M
AN
AG
EM
EN
T
Plant & Platform Consultants Ltd
A strong focus on quality processes within P&P’s ISO 9001 accredited management system is in place. This focus incorporates health and safety, the environment, and privacy across all engineering disciplines.
These elements are vital to ensure the project environment, personnel working on it, and in addition to those who may need to operate or maintain an asset, are protected.
P&P has a strong customer focus and works hard to exceed expectations.
The four main stages of the Quality Process are:
Plan Agree the objectives and establish processes necessary to deliver results in accordance with customer requirements and the organisational policies
Implement Implement the processes
Evaluate Monitor and measure processes and projects against policies, objectives and requirements for the project and report the results
Improve Continually improve performance, quality processes and take appropriate actions.
AT A GLANCE: IN DEPTH:
Certified to ISO9001 (Version 2008)
Original certification obtained 28 February 1996
Documented policies for:
a) Health, Safety and the Environment
b) Privacy
c) Software Installation
d) Quality
e) Drug & Alcohol
QU
AL
ITY
MA
NA
GE
ME
NT
Plant & Platform Consultants Ltd
A key element of a successful project is the effectiveness of its document management system. P&P offers a full document management service that relieves clients of the day-to-day task of tracking and reporting on document status. The management of revisions to drawings and other files is undertaken by dedicated staff utilising client database systems or the power of the “Meridian” document management software. Use is also made of a Virtual Private Network (VPN) to provide clients with seamless access to their information and to retrieve documents managed by P&P. All documents are secure with access available at all times to approved users. In accordance with established quality processes, all data is backed up routinely, ensuring security of client information. P&P has dedicated personnel with many years of experience, able to efficiently handle the logistics of electronic and hard-copy document flow into and out of the office, as well as to ensure all revisions are up-to-date. Services can be tailored to suit specific requirements of clients. Whether it is selected project documents or full suites of operational data, P&P management systems are able to assist clients 24/7.
AT A GLANCE: IN DEPTH:
Significant experience in the use of Meridian software
Attention to the detail and management of critical documents
Extensive track record of management of documents on behalf of clients
Tailored management packages
DO
CU
ME
NT
MA
NA
GE
ME
NT
Plant & Platform Consultants Ltd
Recent changes to the Health and Safety in Employment (Petroleum Exploration and Extraction) Regulations seek to ensure that health and safety regulation of petroleum exploration and extraction activities ( both onshore and offshore) are more consistent with best practice in the industry, these changes included;.
A safety case regime for onshore and offshore installations
Major accident prevention policy
Goal setting regulations to cover activities over the full life cycle of wells
A well examination scheme
Notification and reporting of dangerous occurrences The objective of these changes is to strengthen the management of hazards having the potential to cause multiple fatalities (a major accident). This includes a reduction in the likelihood of an uncontrolled release of oil and gas and ensures the client has sufficient data to have certainty that they are taking all practicable steps to protect themselves and others from preventable incidents.
Plant & Platform has the capability and expertise to assist your business in meeting and exceeding your obligations and to ensure compliance with these updated regulations. In conjunction with CGE Risk, P&P is also able to offer Bowtie (XP) analysis capability to further enhance control of risks and threats to your business. Bowtie analysis is the best tool to visualise and communicate your risk management. A basic Safety Case utilising the Bowtie XP Software solution is available now for review and discussion.
AT A GLANCE: IN DEPTH:
Risk Management Solutions
Risk Analysis
Safety Management Studies
Hazop Studies
LOPA
SIL Analysis
SA
FE
TY
CA
SE
PR
EP
AR
AT
ION
AN
D R
ISK
MIT
IGA
TIO
N E
XP
ER
TIS
E
© Plant & Platform Consultants Ltd
With any infrastructure there is a necessity to protect the integrity of the asset. P&P has in-house capability to undertake detailed inspections and certification of your storage assets. We can inspect and issue Certificates of Compliance in accordance with industry standards and regulations. Irrespective of location, we have the solution for your business. In conjunction with our extensive Mechanical, I&E, Civil Structural and Process engineering design capability, P&P has an API 653 inspector / certifier available and an approved Worksafe compliance certifier who can cover any HSWA inspections and queries associated with Class 2.1.1A, 3.1, 6 and 8 Hazardous Substances and bulk storage tanks. In addition, P&P is now licensed to undertake Design Verification from Hazard Levels E to C for pressure piping. This capability allows the ability to offer you a “one-stop-shop” approach to storage vessels, piping and other areas of plant infrastructure. P&P has professional engineers that are IPENZ, IChemE and RPEQ certified with onshore and offshore experience around Australasia and the Pacific.
Conducting root cause analysis of storage tank failures
Performing hazardous waste storage tank integrity assessments
Developing storage tank inspection and repair specifications
AT A GLANCE: IN DEPTH:
Tank and bulk storage condition rating and HSWA assessment
RPEQ and IPENZ Chartered engineers
Inspections of aboveground
storage tanks to API 653
AP
I653 A
BO
VE
GR
OU
ND
ST
OR
AG
E T
AN
K I
NS
PE
CT
ION
,
CE
RT
IFIC
AT
ION
& H
SW
A C
OM
PL
IAN
CE
CE
RT
IFIC
AT
ION
Plant & Platform Consultants Ltd
The API 650 standard has been developed collaboratively to enable the petroleum industry to design Bulk Storage Tanks (BSTs) to recognised industry standards for use with the storage of petroleum, petroleum by-products and other combustible or flammable liquids commonly handled and stored. API 650 incorporates material selection, design elements and fabrication, erection and testing methods for vertical, cylindrical, aboveground, closed and open-top welded steel storage tanks. P&P has been involved with the design and inspection of BSTs, Fire Protection Systems and Load-out gantries for many years. As well as being a leading designer of BSTs, P&P has the capability to complete API 653 Inspection and Certification for Aboveground Storage Tanks and has become a leader in this area
P&P has also designed BSTs to other recognised industry standards such as AS1692.
Design of new storage tanks in New Zealand, Australia, Papua New Guinea and the South Pacific
Conducting root cause analysis of storage tank failures
Performing hazardous waste storage tank integrity assessments
Developing storage tank inspection and repair specifications
AT A GLANCE: IN DEPTH:
Tank and bulk storage design expertise
RPEQ and IPENZ Chartered engineers
BU
LK
ST
OR
AG
E T
AN
K D
ES
IGN
Plant & Platform Consultants Ltd
P&P has specialist Cathodic Protection (CP) and Corrosion Engineering capability and is a member of the ACA. Selected engineers have undertaken specialist training in CP and Corrosion Engineering. This enhances P&P’s ability to offer more integrated services to clients by allowing focussed consideration of corrosion mitigation at the design phase of a project. P&P is well placed to offer support and advice to clients with existing infrastructure during the life cycle of an asset.
P&P personnel recently attained API 653 Inspection Certification for Aboveground Storage Tanks. Backed with a unique qualification, P&P is positioned to undertake storage tank integrity evaluations, inspections and certification. P&P has undertaken design and inspection of storage tanks for many years and is able to provide HSWA Compliance Certification. Capabilities include the following:
Inspections of aboveground storage tanks to API 653
Conducting root cause analysis of failed storage tanks
Performing hazardous waste storage tank integrity assessments
Specifying coating and linings for storage tank corrosion protection
Developing storage tank inspection and repair specifications
Design of new storage tanks
Tank and bulk storage condition rating and HSWA assessment
AT A GLANCE: IN DEPTH:
Specific capability for oil and gas, energy, pipeline, materials handling and related industries
High quality outputs with Industry endorsed software
RPEQ and IPENZ Chartered engineers
Direct industry experience in
many countries
AS
SE
T I
NT
EG
RIT
Y
Plant & Platform Consultants Ltd
P&P has undertaken a number of Coal Seam Gas projects. Works carried out include facilities design for new and existing fields, as well as project and construction management. These projects have included detailed design of drilling pads, well site civil works and roading design as well as gathering networks for multiple wells within single well site locations and the design and construction of skid packages, and compression facilities. Both permanent and skid or trailer mounted packages have been delivered, and at times work has been carried out within live plant operations. Whether it be development of new fields, boosting existing field gathering capabilities with modifications to HDPE or carbon steel pipe work, or upgrading process capability P&P have the resources and expertise to assist.
AT A GLANCE: IN DEPTH:
Engineering design related to well sites and gathering systems
RPEQ and IPENZ Chartered engineers
Direct industry experience in construction management
Optimisation of existing infrastructure to meet changing production profiles
CO
AL
SE
AM
GA
S
Plant & Platform Consultants Ltd
P&P has undertaken many water treatment projects, including filtration, dosing facilities and electrolytic treatment. A number of P&P personnel have brought direct water treatment experience from across many industries to Plant & Platform. The types of projects include the design of systems to separate foam from water, utilities water design utilising carbon beds and air stripping, reverse osmosis and water treatment plant operational experience. In conjunction with in-house capability, P&P has developed professional relationships with specialist water treatment companies. These specialist skills may be engaged at any stage of a project, regardless of size and/or complexity.
Potable water supply systems
Produced water management
Blackwater systems for wellsites
Bulk storage tanks for refined product and water systems
Firefighting water distribution and applicable appliances
Geothermal, gathering, re-injection systems
AT A GLANCE: IN DEPTH:
Water Supply Systems
Water Treatment Systems
Disposal Systems
WA
TE
R A
ND
WA
ST
E W
AT
ER
HA
ND
LIN
G
Plant & Platform Specialist Capability PO Box 660, New Plymouth 4310
141 Devon Street West, New Plymouth Ph: +64 6 759 2199
NEW ZEALAND www.pandp.co.nz
© Plant & Platform PP599 Rev. 26
JURISDICTIONAL RECOGNITION
COMPLIANCE & INSPECTION SERVICES
CIVIL/STRUCTURAL ENGINEERING
BULK STORAGE TANK FOUNDATION DESIGN
(API 650)
STRUCTURAL VERIFICATION
SAFETY ENGINEERING
HAZOP Leader
LOPA “BOWTIE” RISK ANALYSIS
HAZARDOUS AREA CLASSIFICATION
SAFETY CASE & RISK ASSESSMENTS
HIPPS Design
OTHER SPECIALIST SERVICES
ASSET RELIABILITY MANAGEMENT
FIRE FIGHTING SYSTEM DESIGN
PROCUREMENT, EXPEDITING & MATERIAL
INSPECTION SERVICES
PE PIPELINE GATHERING SYSTEMS
CAPEX Estimating
DOCUMENT MANAGEMENT
CONSTRUCTION SUPERVISION & COMMISSIONING ASSISTANCE
INSTRUMENT & ELECTRICAL ENGINEERING
CUSTODY TRANSFER METERING
COMPRESSOR CONTROL SYSTEMS
PIPELINE ELECTRICAL
INTERFERENCE
PIPELINE & PLANT CONTROLS
POWER STATION GAS SUPPLY SYSTEMS
GAS ANALYSIS SYSTEMS
SIL STUDIES
SURGE ANALYSIS
SAFETY MANAGEMENT
STUDIES
MODELLING CONSEQUENCE – DYNAMIC - NETWORK
Functional Safety Engineering (TUV Certified)
RPEQ Registration
CPEng Registration
IChemE Registration
ROTATING EQUIPMENT
IMechE Registration
IChemE Registration
MECHANICAL ENGINEERING
PRESSURE VESSEL DESIGN
BULK STORAGE TANK DESIGN
INTELLIGENT PIGGING PROGRAMS
API 579 FITNESS-FOR-
SERVICE ASSESSMENTS
PECPR DESIGN VERIFICATION
(LEVELS C, D & E)
HSWA Compliance Certification
API 653 Inspection Certification
SEISMIC ANALYSIS & ASSESSMENT
HAZARDOUS AREA ASSESSMENTS
SAFETY INTEGRITY SYSTEMS
PROCESS ENGINEERING PIPELINE ENGINEERING
PIPELINE DESIGN
PIPELINE FRACTURE CONTROL
DEFECTS & PIPELINE ASSESSMENT
PIPELINE REMAINING LIFE ASSESSMENT
Doc No: PP595/Rev 17
THIS IS TO CERTIFY THAT
Plant & Platform Consultants LimitedHas been assessed for contractor pre-qualification
valid from 31 Jul 2018 - 31 Jul 2020
Engineering (Professional Services)
Category 3
www.prequal.co.nz | [email protected] 0800 773 782
PREQUAL CERTIFICATE