cantilever steel gates
DESCRIPTION
Cantilever Steel GatesTRANSCRIPT
12
G a t e s
The Leda-Vannaclip Group is one of the largest producers of high security industrial gates in Australia.
We manufacture a broad range of gates with varying degrees of security and performance levels. Standard models range from the medium security swing gates to high security cantilever gates. All models may be completely integrated with other Leda-Vannaclip perimeter security equipment like bollards, tyre spikes, road blockers and boom gates to enhance security levels.
Gates are effective access control devices. When used in conjunction with high security bollards, gates contribute towards reducing the impact of attacks where both vehicles and insurgents are used together to breach perimeter defences.
Leda-Vannaclip’s policy of continuous improvement is reflected in our research and development of new gate designs and materials technology. The Track Sliding Crash Gate was successfully tested using SAP 2000 (Version 9) software.
“The analysis showed that a 7 tonne vehicle travelling at 80 km/h and striking the gate at a height of 0.7 metres is safe in that only limited plastic hinges are formed and the maximum deformation of 14mm would have allowed the gate to continue to function without repair” John Deaker, CEANET Pty Ltd
As most gates typically require some degree of customisation, Leda-Vannaclip is able to design custom-made product to suit any application. This applies to modifications to the existing range or new products to suit your particular requirements.
Track Sliding Crash Gate
P R O D U C T R A N G E
Track Sliding
Cantilever
Overhead Sliding
Swing
Applications
• Industrial areas
• Airports and shipping ports
• Military complexes
• Power plants
• Private car parks
• Distribution depots
• Waste facilities
13
G a t e s
Standard Drive System Features• Drive motor is 3-phase brake motor, 0.55kW,
to 1.0kW 100% duty cycle with adjustable opening and closing speeds. Limit and/or proximity switches are used for position sensing.
• Features a manual override system in the event of a power failure.
• Controlled via a purpose-built control board, or optionally by a PLC.
• Flexible control boards and PLC units are used, allowing linkages to a range of peripheral applications like safety inputs, alarms, strobe lights etc.; depending on client requirements.
• Standard system may be interfaced with most types of access control systems.
• High speed retracting ability; achieving up to 1 metre per second gate speed.
Electrified
Palisade IP
Chain link IC
Securamesh ILlarge
Securamesh IAanti-climb
Vertical upright bars IV (standard infill)
Infill
Crimped picket TC
Flat picket TF
Looped picket TL
Palisade TP
Razor wire TR
Barbed wire TB
Top Extensions
Safety Features
Induction loops SLBW
Infra-red IRBEAMScurtain beams
Audio warning ALM
Strobe light STROBE
Electric EY
O P T I O N S R A N G E
Intrinsically safe ISAFEoptions
��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
14
G a t e s
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
CGS 3.0 2.1 TN none (std) IV vertical upright bar (std) EN none (std)
4.0 TC crimped picket IA welded mesh, anti-climb EY electrified
5.0 TF flat picket IL welded mesh, large
TL looped picket IC chain link mesh
TP palisade IP palisade
TR razor wire
TB barbed wire
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
C A N T I L E V E R C R A S H GAT E
TRACK SLIDING AVAILABLE
���������������������������������������
���������� �������������������������������� ��������������������������������������������������������� ���������������������������� �������������������� �������������������������������������������������������������������� ����������������������� ������������������������� �������������������
15
G a t e sT R A C K S L I D I N G
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
TMS 3.0 1.8 TN none (std) IV vertical upright bar (std) EN none (std)
4.0 2.1 (std) TC crimped picket IA welded mesh, anti-climb EY electrified
5.0 2.4 TF flat picket IL welded mesh, large
6.0 TL looped picket IC chain link mesh
7.0 TP palisade IP palisade
8.0 TR razor wire
9.0 TB barbed wire
10.0
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
Customised Sliding GatesContact Leda-Vannaclip for more information on Overhead, Bi-slide and Tri -slide Gates
���������������������������������������
���������������������������������������
16
G a t e sR A K E D T R A C K S L I D I N G
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
TMR 3.0 1.8 TN none (std) IV vertical upright bar (std) EN none (std)
4.0 2.1 (std) TC crimped picket IA welded mesh, anti-climb EY electrified
5.0 2.4 TF flat picket IL welded mesh, large
6.0 TL looped picket IC chain link mesh
7.0 TP palisade IP palisade
8.0 TR razor wire
9.0 TB barbed wire
10.0
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
���������������������������������������
���������������������������������������
17
G a t e s
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
CLS 3.0 1.8 TN none (std) IV vertical upright bar (std) EN none (std)
4.0 2.1 (std) TC crimped picket IA welded mesh, anti-climb EY electrified
5.0 2.4 TF flat picket IL welded mesh, large
6.0 TL looped picket IC chain link mesh
7.0 TP palisade IP palisade
8.0 TR razor wire
9.0 TB barbed wire
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
C A N T I L E V E R
18
G a t e s
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
SWS 1.0 1.8 TN none (std) IV vertical upright bar (std) EN none (std)
2.0 2.1 (std) TC crimped picket IA welded mesh, anti-climb EY electrified
3.0 2.4 TF flat picket IL welded mesh, large
4.0 TL looped picket IC chain link mesh
5.0 TP palisade IP palisade
6.0 TR razor wire
7.0 TB barbed wire
8.0
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
S I N G L E S W I N G
19
G a t e s
Product Code Generation Type Clear Opening 1 Gate Height Top Section Infill Electrified m m (optional) (optional) (optional)
SWD 6.0 1.8 TN none (std) IV vertical upright bar (std) EN none (std)
8.0 2.1 (std) TC crimped picket IA welded mesh, anti-climb EY electrified
10.0 2.4 TF flat picket IL welded mesh, large
12.0 TL looped picket IC chain link mesh
14.0 TP palisade IP palisade
16.0 TR razor wire
TB barbed wire
Mandatory 2 Mandatory 2 Mandatory 2 Optional 2 Optional 2 Optional 2
1. Clear Opening refers to the width of the passage in which the gate assembly is manufactured to suit.2. All Mandatory and Optional Entries are merely proposing typical configurations commonly ordered. Should departure from typical
configurations be required, please contact your nearest Leda-Vannaclip Sales Office.
D O U B L E S W I N G