calorimeters design issues and simulation needs
DESCRIPTION
Calorimeters Design Issues and Simulation Needs . C.Woody Physics Department Brookhaven National Lab. EIC Simulation Workshop Oct 9, 2012. Design Issues for a Calorimeter System for an EIC Detector. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/1.jpg)
Calorimeters Design Issues and Simulation Needs
C.Woody
Physics DepartmentBrookhaven National Lab
EIC Simulation Workshop
Oct 9, 2012
![Page 2: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/2.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 2
Design Issues for a Calorimeter System for an EIC Detector
• Must cover the phase space and kinematic range necessary to carry out the suite of physics measurements at EIC
• The requirements are different in different regions of phase space
• Must work in conjunction with the tracking system of the EIC detector to provide the necessary energy/momentum resolution to carry out the physics measurements
• The calorimeters must cope with the backgrounds produced by the machine and surrounding materials, and must survive the radiation environment
• The detectors must work in the presence of a strong magnetic field
![Page 3: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/3.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 3
EIC Detector – Conceptual Design Central Detector Forward/Backward Detectors
• Large acceptance: -5 < h < 5• Asymmetric• Nearly 4p tracking and EMCAL coverage• HCAL coverage in central region and hadron direction • Good PID • Vertex resolution (< 5 mm)
• Electron is scatted over large range of angles (up to ~165˚)
• Low Q2 → low momentum (~ few GeV)• Requires low mass, high precision
tracking
EM
EM
EMEM
EM
HAD
HAD
HAD
![Page 4: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/4.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 4
Momentum and Angle ResolutionFrom the sPHENIX MIE Proposal (T.Hemmick)
electron direction
proton direction
5 x 100 5 x 250
Measurement of FL(x,Q2)Assumption: To measure yield to 1% requires 20%
uncertainty due to bin shifts
![Page 5: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/5.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 5
Kinematic Coverage and Resolution - DISFrom the sPHENIX MIE Proposal (S.Bazilevsky)
h<-1 |h| < 1
e ep
pg
g
Energy resolution is especially important at low y
Defines “reach” in y (→ higher x)
h<-1 |h| < 1 Ee vs hNote: Cutting out low momentum electrons (E<1 GeV) does not loose much in x and Q2
![Page 6: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/6.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 6
Kinematic Coverage and Resolution - DVCS
h<-1h>1 |h| < 1Eg vs h
From the sPHENIX MIE Proposal (S.Bazilevsky)
DVCS photon is mainly in central region and fairly low energy
![Page 7: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/7.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 7
Energy Resolution vs Tracking ResolutionS.Bazilevsky, FSU PHENIX Collaboration Meeting
EMC = Track a=5% E ~ 2.7 GeVa=10% E ~ 4.2 GeVa=20% E ~ 7 GeV
Tracking: p/p = 0.01p + 0.01
EMCal: E/E = a/sqrt(E) 0.02
= Track, if Track < EMC
= EMC, if EMC < Track
Tracking only
a=10% a=20%
Resolution on x and Q2 (5 x 250)
![Page 8: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/8.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 8
HCAL Outer
HCAL InnerEMCAL
Solenoid
VTX
Coverage ± 1.1 in h and 2p in f
![Page 9: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/9.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 9
sPHENIX CalorimetersTungsten-Scintillating Fiber
“Optical Accordion” EM Calorimeter
Scintillating Tile WLS Fiber HCAL
SiPM+ Mixer
![Page 10: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/10.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 10
sPHENIX Calorimeter Simulations (GEANT4)
resolution = (14.0 0.2)%/E
10 GeV electron shower 10 GeV pion shower
![Page 11: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/11.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 11
STAR Forward Calorimeter
C.Woody, sPHENIX Review - EMCAL, 10/5/12 11
Spacal/SpacordionTungsten Powder/Epoxy/SciFi
Results from beam test at Fermilab (Jan 2012)
O.Tsai, H.Huang (UCLA)
![Page 12: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/12.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 12
STAR Forward Calorimeter Simulations O.Tsai (UCLA)
![Page 13: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/13.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 13
PWO Crystal Calorimeter for PANDAEndcap3864 crystals
R. Novotny, CALOR12
11360 PWO-II crystals200 mm long
Barrel
15 GeV Positrons
![Page 14: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/14.jpg)
C.Woody, EIC Simulation Workshop, 10/9/12 14
P.Adzic et.al., JINST Vol.5 (2010) P03010
Radiation dose after 500 fb-1 (~ 10 yrs)
CMS Crystals
Radiation Effects on Detectors
JLAB SiPMsY.Qiang et.al, arXiv:1207.3743v2,17 July 2012
![Page 15: Calorimeters Design Issues and Simulation Needs](https://reader036.vdocuments.site/reader036/viewer/2022062501/568163c9550346895dd50388/html5/thumbnails/15.jpg)
15
Needs for Monte Carlo Simulation(not an all inclusive list…)
• Further refinements are needed on the calorimeter requirements for energy resolution, segmentation, etc over the required kinematic range.
This needs to be integrated with the requirements on the tracking system for momentum resolution, vertex capabilities, etc over the same kinematic range.
The calorimeters and tracking detectors should be considered as a combined system when looking at these requirements. • Improve simulation models of some of the proposed detector designs (e.g., include
realistic geometry of absorber and active material, effects of light collection, dead material, etc). This is important to study the non-uniformities that may exist in the proposed designs and could lead to important systematic effects.
• Improved simulations of machine backgrounds that generate backgrounds in the various detectors (particularly soft electrons, gammas and neutrons)
• Compute radiation levels and neutron fluences over the solid angle subtended by the various detectors. This needs to include a realistic model of the IR design and the overall detector itself.
• ….C.Woody, EIC Simulation Workshop, 10/9/12