calibration & measurement kit catalog j6...2 calibration & measurement kit introduction...

CALIBRATION & MEASUREMENT KIT

Yes, we do provide calibration and measuring kit, please go

ahead.

2CALIBRATION & MEASUREMENT KIT

INTRODUCTION

Welcome to our 2020 - 2021 edition of Product Catalog. We would like

to thank you for your continue support and encouragement. Throughout this challenging time, we have grown and transform our business to be more efficient and effective. This will enable us to offer better service and more competitive pricing to our customers.

Our new edition of catalog comes with a easy reference features where we categorized the products into different usage categories, i.e. Advanced Material, Renewable Energy, Bio-Process, Gauge Calibration, Membrane Technology, 3D scanner and others. This will facilitate the users to quickly access to the equipment specification required, and options available to them in term of measuring range or equipment complexity.

In our new catalog, we have also added the equipment to do research in renewable energy like solar cell, fuel cell, flow cell, lithium ion batteries, and membrane technologies. In synergy with our advanced material equipment, we have also added the equipment for material characterization especially in the area of rare earth research and magnetic properties. In line with the manufacturing industry footsteps, the equipment on 3D scanning and 3D printing also have been added in to expand the tools in the research and development for industry 4.0.

To our current customers, we believed our partnership will be strengthen for the years to come. The new catalog will also create new opportunities to build new relationship with new customers.

Lastly, I would like to thanks our staffs for their dedication and sacrifice in supporting the management for a brighter future.

Patrick TanDirectorKGC (Group of Companies)

Contents

Teslameter 4

Magnetizer 5

Permagraph 6

Fluxmeter 6

Magnetic Field Scanner 7

DC Electronic Load 7

Temperature Calibrators 8

Blackbody Calibration Source 9

Temperature Calibrators Bath/Dry Block 10

Hydraulic Pressure Calibrator 11

Pressure Calibrator Hand Pump 12

Hydraulic Dead Weight Tester 14

Flow Meter Calibration System 16

Customized Calibration Test Bench 18

Teslameterby Magnet-Physik, GermanyThe magnetic field strength is measured by Hall Sensors. The latest development is a USB hall probe which is directly connected to a PC and operated via user-friendly software.

• Range: 20 mT to 2 T• Resolution: 0.01 mT• Units: Tesla, Gauss, Ampere per Meter,

Ampere per Centimeter, Oersted• Frequency: AC, 20 Hz - 10 kHz (true rms)

FH 52• Range: 30 μT to 30 T• Resolution: Depending on probe type• Units: Tesla, Gauss, Ampere/Meter • Frequency: DC, 30 Hz - 20 kHz

FH 55• Range: 30 μT to 30 T• Resolution: Depending on probe type• Units: Tesla, Gauss, Ampere/Meter • Frequency: AC, 20 Hz - 20 kHz (true rms)

FH 54

FH 55FH 54

FH 52

Accessories

The FH 52 is a handheld measuring instrument for measuring the magnetic field strength H and the magnetic flux density or induction B. It is used together with exchangeable transverse or axial Hall probes.Apart from the possibility of measuring static (DC) or alternating (AC) fields, the FH 52 offers many functions, e.g. selectable units, manual or automatic range selection, maximum and minimum value storage and adjustable limit values. The relative function allows the difference to a set value to be displayed.

The FH 54 is a handheld measuring instrument for measuring the magnetic field strength H in Ampere per Meter (A/m) and the magnetic flux density or induction B in Tesla (T) or Gauss (G).Particular features of the FH 54 are high accuracy, easy handling and a multitude of functions.Apart from the possibility of measuring static (DC) or alternating (AC) fields, the FH 54 offers many functions, e.g. manual or automatic range selection, maximum and minimum value storage and adjustable limit values. The relative functioncan be used to show the difference to a set value or to measure small changes in a large magnetic field.

The magnetic field strength meter FH 55 is a compact precision instrument that measures the magnetic flux density (induction) B and the magnetic field strength H in Gauss, Tesla or Ampere/Meter. The instrument is supplied with a zero field chamber and an operation manual in English language.

Many different Hall probes are available, for example probes with especially small active areas for measurements of the size of a dot, or probes with a high degree of sensitivity or with a built-in sensor for correction of temperature dependency. The latter also allows display of the temperature. You can findfurther information in the probe data sheet.


Magnetizerby Magnet-Physik, Germany

All basic functions are controlled continuously by the PLC. The voltage at the capacitors is monitored by the PLC and additionally by a separate circuit. Magnetizing fixtures are

equipped with thermocouples that allow monitoring of the fixture temperature.

• Energy up to 2,800 Ws• Impulse currents up to 60,000 A• Short-circuit protection is realized by an

SCR-circuit• Short cycle times• NC up to 25,000 A• HC up to 60,000 A

U Series

• 2,000 Volt max. Voltage• 10000 Ws Energy • 25,000 A max current• Medium sized rotors with rare earth

magnets• Productions of high magnetic fields in

axial coils

K Series• 3000 V max voltage• Energy up to 500000 Ws• Impulse current up to 60,000 A• Suited for a wide scope of applications in

the laboratory and in production• Up to 10 mechanically selectable outputs

can be built into an X-Series magnetizer

X-Series• 3000 V maximum voltage• Energy up to 5000 Ws• Impulse current up to 60,000 A• Highly efficient charging units can achieve

very short cycle times• An integrated measuring unit monitors the

temperature of the connected magnetizing fixture

M Series

K Series

U Series

M Series

X-Series

5KGC

Fluxm

eterP

ermag

raph

The PERMAGRAPH® is the world-wide known standard equipment for the measurement of magnetic characteristics of permanent magnets in research, development, quality control and production.

The PERMAGRAPH® C is an automatic computer controlled precision version of this measuring instrument. Equipped with two Electronic Fluxmeters EF 5 and the high performance software package PERMA, it facilitates quick and reliable measurements.

The system design conforms to the standards IEC 60404-5, ASTM A977/A977M and DIN IEC 60404-5 (replacement for DIN 50470, DIN EN 10332). The temperature upgrade conforms to IEC 61807TR and DIN IEC 68/190/CDV.

EF 5

EF 14

• Resolution: 10-4 / 10-5 /10-6 /10-7 Vs

• Upper range limits: ±225.0 mVs, ±99.99 mVs, ±9.999 mVs, ±999.9 µVs

• Max input voltage: 40 V• Input resistance, R

i= 100 kΩ

EF 14 Measuring Coils for Fluxmeters• FS Series• PKS Point Coil• DFS Thin Film Coil

• Resolution: 10-4 / 10-5 /10-6 /10-7 Vs

• Upper range limits: ±225.0 mVs, ±99.99 mVs, ±9.999 mVs, ±999.9 µVs

• Max input voltage: 60 V• Input resistance, R

i= 0 Ω, 10

kΩ

EF 5


DC

Ele

ctro

nic

Loa

dM

agn

etic

Fie

ldSc

ann

er

7KGC

• The magnetization of encoders with magnetic tracks requires a validation of results.

• The Magnetic Field Mapping Systems allows fast, high resolution mapping of magnetic field around a permanent magnet. The map of the magnetic field can be presented in the form of color coded 2D or 3D isometric visual display on a a PC Screen, as a table of numerical values of the magnetic field etc. The fully integrated Hall probe measures all three components of mangetic field (Bx, By, Bz) simultaneously at virtually same point

• The mapping system is controled by an easy-to-use-software. Scanning profiles are fully customizable

MAGNETIC FIELD SCANNER

• Incorporating high-performance chips, the M97XX series delivers high speed and high accuracy with a resolution of 0.1 mV and 0.01 mA (basic accuracy is 0.03% and basic current rise speed is 2.5 A/μs).

• M97XX series have wide application from production lines for cell phone chargers, cell phone batteries, electronic vehicle batteries, switching power supplies, linear power supplies, and LED drivers, to research institute, automotive electronic, aeronautic and astronautic, maritime, solar celland fuel cell etc.test and measurement applications.

DC ELECTRIC LOAD

TemperatureCalibrators9V Alkaline Battery, Operation Manual, Test Leads, and Traceable Calibration Certificate are included

• Capability to measure & simulate DC voltage, DC current, resistance, thermocouples, & RTDs

• In/Out data memory: 20 values can be stored manually

• RS-232 computer interface is provided

MFC 40

• Compact, light weight unit with holster• Selectable temperature output readings

(in °C / °F)• Measurement & simulation of

thermocouple types R, S, B, E, K, J, T, & N and voltage -1 V simulation, 100 mV measurement

Nagman 02

• Capability to measure & simulate DC voltage, DC current & frequency

• Capability to perform Continuity Test & provide Loop Supply (24 V) for Transmitters

Nagman 15+• Compact, light weight unit with holster• Capability to measure & simulate voltage &

current readings• Capability to provide loop supply (24V) for

transmitters

Nagman 05+

• Compact, light weight unit with holster• Selectable temperature output readings

(in °C/°F)• Measurement & Simulation of RTD types:

PT100 = -200 to 850°C Cu50 = -50 to 150°C

• Resistance: 400 Ω

Nagman 03

• Capability to measure & simulate DC voltage, DC current, frequency, resistance, thermocouples, & RTDs

• Capability to perform Switch Test & Continuity Test

Nagman 25• Capability to measure & simulate DC

voltage, resistance, thermocouple, & RTD

Thermocouple types : R, S, B, E, K, J, T, N, L & URTD Types : PT100, Pt200, Pt500, Pt1000, Cu10 & Cu50Resistances : 500 Ω & 5 KΩ in Measurement Mode; 400 Ω & 4 KΩ in Simulation ModeDC Voltages : 50 mV & 500 mV in Measurement Mode; 100 mV & 1000 mV in Simulation Mode

Nagman 14+


BlackbodyCalibration Source

Specifically Designed to for Infrared Thermometer Temperature Sensor Calibration that emits thermal energy whose intensity follows Planck’s Law of radiation

• Medium temperature black body calibration source - table top model

• Range: 120°C above Ambient to 600°C• Accuracy: Within 0.5% F.S. (Min. 1°C)• Emissivity: 0.98• Aperture Dia 25 mm• Stability: ±0.5°C• Resolution: 0.1°C• Temperature control: Auto-tune PID

BBSM• High temperature black body calibration

source - table top model• Range: 500°C to 1200°C• Accuracy: Within 0.5% F.S. (Min. 1°C)• Emissivity: 0.98• Aperture Dia 25 mm• Stability: ±1.5°C• Resolution: 1°C• Temperature control: Auto-tune PID

BBSH• Dual chamber black body calibration

source - table top model• Chamber 1 Range: 50°C to 300°C

Chamber 2: Range: 250°C to 600°C• Accuracy: Within 0.5% F.S. (Min. 1°C)• Emissivity: 0.98• Aperture Dia 25 mm• Stability: ±0.5°C• Resolution: 0.1°C• Temperature control: Auto-tune PID

BBSD

• Low temperature black body calibration source - table top model

• Range: 10°C above Ambient to 350°C• Accuracy: Within 0.5% F.S. (Min. 1°C)• Emissivity: 0.98• Aperture Dia 25 mm• Stability: ±0.5°C• Resolution: 0.1°C• Temperature control: Auto-tune PID

BBSL

9KGC

What is a Blackbody Calibration Source?

A blackbody calibration source is a tool for checking the calibration of an infrared temperature sensor. It consists of a heated (or cooled) target object whose temperature is precisely known, and is the basis for accurate calibration of infrared pyrometers.

A blackbody is an ideal radiator i.e. it emits thermal (visible and infrared) energy whose intensity at a given wavelength and temperature follows Planck’s Law of radiation. It completely absorbs and emits all radiation (it is extremely non-reflective) and has an emissivity value of 1.

Because there no material exists that could make a true perfect blackbody, in practice a blackbody calibration source always has a slightly lower emissivity than 1, however by careful design it is possible to get very close.

The emissivity setting of the sensor should be adjusted to match the emissivity of the blackbody, and the sensor should be mounted close enough that the measured spot diameter is no larger than half the aperture diameter.

TemperatureCalibrator Bath/Dry BlockIdeal for quick / fast Site Calibration of RTDs / TCs / Bi-Metal Thermometers, Temperature Switches / Indicators etc. in Industrial & Marine Applications

• Range : 50°C to 650°C• Resolution : 0.01°C• Accuracy : ±0.4°C• Stability : ±0.04°C• Measurement Capability for TC, RTD, mV /

mA / V & Resistance Signals• Touch Membrane Keypad• Switch Test Contact Measurement• Multi-hole Thermowell Inserts

Metcal 650• Range : 50°C to 650°C• Resolution : 0.1°C• Accuracy : ±0.6°C• Stability : ±0.05°C• Measurement Capability for TC, RTD, mV /

mA / V & Resistance Signals• Touch Membrane Keypad• Switch Test Contact Measurement• Interchangeable Thermowell Inserts,

Single / Multi-hole

MTC 650• Range : 10°C above Ambient to 350°C• Resolution : 0.1°C• Accuracy : ±1°C• Stability : ±0.3°C/±0.4°C• Rugged Field Use & for Calibration at Site• Auto-tune PID Control• Switch Test Contact Measurement• Interchangeable Thermowell Inserts,

Single / Multi-hole

350-H / 350-H2

• Range : -40°C from Ambient to 123°C• Resolution : 0.1°C• Accuracy : ±0.3°C• Stability : ±0.05°C• Measurement Capability for RTD, mA &

Resistance Signals• Touch Membrane Keypad• Switch Test Contact Measurement• Interchangeable Single hole Thermowell

Inserts

MTC40• Range : 300°C to 1200°C• Resolution : 1°C• Accuracy : Better than ±3°C• Stability : Better than ±0.5°C (below 600°C)• Cost effective High Temperature Source• Multi-hole/Interchangeable (Thermowell)

Inserts to suit• Auto-tune PID Control• Forced Air Cooling provision

1200 HN• Range : 50°C to 600°C• Resolution : 1°C• Accuracy : ±0.1% F.S. / ±0.15% F.S.• Stability : ±0.5°C• Calibration at Site, Fast & Reliable• PD Temperature Control• Analog Output• Interchangeable Thermowell Inserts,

Single / Multi-hole

ETC 600 / ETC 600-2

• Range : 50°C to 350°C• Resolution : 0.1°C• Accuracy : ±0.4°C• Stability : ±0.05°C• Measurement Capability for TC, RTD, mV /

mA / V & Resistance Signals• Touch Membrane Keypad• Switch Test Contact Measurement• Interchangeable Thermowell Inserts,

Single / Multi-hole

MTC 350• Micro Oil Bath• Range : 20°C above Ambient to 250°C• Resolution : 0.1°C• Accuracy : ±0.6°C• Stability : ±0.1°C• Auto-tune PID Controller• Stirrer to ensure Temperature uniformity• (Oil) Spill proof Transport Lid

MOB 250• Range : 20°C above Ambient to 650°C• Resolution : 0.1°C• Accuracy : ±1.5°C• Stability : ±0.5°C / ±0.6°C• Rugged Field Use & for Calibration at Site• Auto-tune PID Control• Improved Accuracy, Resolution & Stability• Interchangeable Thermowell Inserts,

Single / Multi-hole

650-H / 650-H2

• Range : -10°C to 120°C• Resolution : 0.01°C• Accuracy : ±0.2°C• Stability : ±0.02°C• Measurement Capability for TC, RTD, mV /

mA / V & Resistance Signals• Touch Membrane Keypad• Switch Test Contact Measurement• Multi-hole Thermowell Inserts

Metcal 40

Model Metcal 40Models 350-H / 350-H2

Models ETC 600 / ETC 600-2

Model 1200 HN Model MOB 250


• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar• Accuracy : ±0.05% FS• Automatic Temperature Compensation (0 to 50°C)• Resolution : Minimum 5 digits• Selectable Engineering Pressure Units• DC Current Measurement : 50 mA (Active Loop) & 25 mA (Passive

Loop)• Switch Test capability & Zero Offset facility• Pressure Transducer – all Media compatible with SS316

MPC-P-B

• Range : -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar• Accuracy : ±0.025% FS• Automatic Temperature Compensation (0 to 50°C)• Resolution : Minimum 5 digits• DC Current Measurement : 50 mA (Active Loop) & 25 mA (Passive

Loop)• Switch Test capability & Zero Offset facility• Pressure Transducer – all Media compatible with SS316

MPC-P-B+

• Ranges : 0 to 70 / 100 / 200 / 400 / 600 / 700 Bar• Accuracy : ±0.02% F.S.• Automatic Temperature Compensation (0 to 50°C)• DC Current Measurement : 50 mA (Active Loop) & 25 mA (Passive

Loop)• Switch Test capability & Zero Offset facility• Audio & Visual Alarms for Over Pressure• Pressure Transducer – all Media compatible with SS316• Matching External Hydraulic Hand Pump

MPC-H-B+• Ranges : 0 to 70 / 100 / 200 / 400 / 600 / 700 Bar• Accuracy : ±0.05% FS• Automatic Temperature Compensation (0 to 50°C)• DC Current Measurement : 50 mA (Active Loop) & 25 mA (Passive

Loop)• Switch Test capability & Zero Offset facility• Audio & Visual Alarms for Over Pressure• Pressure Transducer – all Media compatible with SS316• Matching External Hydraulic Hand Pump

MPC-H-B

Por

tab

le H

ydra

ulic

Pre

ssu

re C

alib

rato

rB

ench

top

Pn

eum

atic

Pre

ssu

re C

alib

rato

r• Ranges : 0 to 200 / 400 Bar• Accuracy : ±0.05% F.S.• Automatic Temperature Compensation (0

to 50°C)• DC Current Measurement : 50 mA (Active)

& 25 mA (Passive)• Rechargeable Battery with ‘Low Battery’

indication• Built-in Priming Pump & Fine Adjustment

Vernier assembly

PPC-H• Dual Ranges : -0.85 Bar Vacuum to 20 Bar

(Pneumatic) & 0 to 400 Bar (Hydraulic)• Accuracy : ±0.05% F.S.• Automatic Temperature Compensation (0



indication• Digital Pressure Indicator with 2 integral /

built-in Pumps & Fine Adjustment Vernier

PPC-D

• Ranges : 0 to 200 / 400 Bar• Accuracy : ±0.025% F.S.• Automatic Temperature Compensation (0



indication• Built-in Priming Pump & Fine Adjustment

Vernier assembly

PPC-H+• Ranges : ±2000 / ±5000 / ±8000 / ±10000

mmH2O• Accuracy : ±0.075% F.S.• Automatic Temperature Compensation (0

to 50°C)• Pressure Unit : mmH2O (mmWC)• DC Current Measurement : 50 mA (Active)

& 25 mA (Passive)• Built-in Pump & Fine Adjustment Vernier

Assembly

PPC-PL• Dual Ranges : -0.85 Bar Vacuum to 20 Bar

(Pneumatic) & 0 to 400 Bar (Hydraulic)• Accuracy : ±0.025% F.S.• Automatic Temperature Compensation (0

to 50°C)• Unique Combo 2-in-1 Space Saver• DC Current Measurement : 50 mA (Active)

& 25 mA (Passive)• Digital Pressure Indicator with 2 integral

/ built-in Pumps with Fine Adjustment Vernier

PPC-D+

PPC-HPPC-DPPC-PL

11KGC

Hydraulic Pressure CalibratorEquipped with Nickel Based Super Alloy Tube & Flanges30 Segments PID Temperature Control with Auto-tune FunctionHigh Purity Alumina Fiber Insulation

• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60 bar

• Accuracy : ±0.1% F.S.• 2 Line Alpha Numeric Display• Touch Membrane Keypad• Selectable Engineering Pressure Units• DC Current Measurement : 0 to 25 mA

(Active)

MPCE-P• Ranges : 0 to 70 / 100 / 200 / 350 / 600 /

700 Bar• Selectable Engineering Pressure Units• Switch Test capability & Zero Offset facility• Audio & Visual Alarms for Over Pressure• Pressure Transducer – all Media

compatible with SS316

MPC-H• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60

bar• Accuracy : ±0.05% F.S.• Automatic Temperature Compensation (0

to 50°C)• Pressure Transducer – all Media

compatible with SS316

MPC-P

• Ranges : 0 to 70 / 100 / 200 / 350 / 600 / 700 Bar

• Accuracy : ±0.1% F.S.• 2 Line Alpha Numeric Display• Touch Membrane Keypad• Selectable Engineering Pressure Units• DC Current Measurement : 0 to 25 mA

(Active)

MPCE-H• Ranges : 0 to 70 / 100 / 200 / 350 / 600 /

700 Bar• Accuracy : ±0.025% F.S.• DC Current Measurement : 50 mA (Active)

& 25 mA (Passive)• Switch Test capability & Zero Offset facility

MPC-H+• Ranges : -0.85 to 2 / 10 / 20 / 35 / 40 / 60

bar• Accuracy : ±0.025% F.S.• Automatic Temperature Compensation (0


& 25 mA (Passive)• Switch Test capability & Zero Offset facility

MCP-P+


Pressure CalibratorHand Pumps

Ideal tool for checking & Calibration of Digital / Analog Pressure Gauges / Indicators, Pressure Transmitters / Transducers &

Hydrostatic Pressure Testing etc.

• Combined Vacuum & Low Pressure Pump with Pressure / Vacuum Changeover option

• Generation (Range) of : Pressure Upto 2 Bar; Vacuum Upto 0.9 Bar

• High Resolution / Sensitivity of around 0.05 mBar (0.5 mmWC)

• Very Low Leakage rate

PHP 2• Ranges : Upto 350 bar• Fine Adjustment Vernier with Open /

Close Release Valve for small incremental Pressure readings

• Medium : Oil (optional : Water)• Oil Reservoir Material : Transparent Acrylic

HHP 350• Generation pressure up to 35 bar• Fine Adjustment Vernier to realize upto 1

mBar Resolution / Sensitivity• Very Low Leakage rate• Flexible Nylon Hose (1 Meter) with Swivel

Adaptor to connect devices under test• Test Connection Port : 1/4”(F) BSP; Gauge /

Indicator Connection Port : 3/8” (F) BSP

PHP 35

• Generation pressure up to 10 bar• Fine Adjustment Vernier to realize upto 1




PHP 10• Ranges : Upto 700 Bar • Fine Adjustment Vernier with Open /


• Oil Reservoir Material : Transparent Acrylic• Reservoir Capacity : 100 cc

HHP 700• Generation pressure up to 40 bar• Fine Adjustment Vernier to realize upto 1




PHP 40

• Generation pressure up to 25 bar• Fine Adjustment Vernier to realize upto 1




PHP 25• Ranges : Upto 1,000 Bar • Fine Adjustment Vernier with Open /


• Oil Reservoir Material : Transparent Acrylic• Reservoir Capacity : 100 cc

HHP 1000• Combined Vacuum & Pressure Pump with

Pressure / Vacuum Changeover option• Generation (Range) of : Pressure upto 60

bar; Vacuum upto 0.9 Bar• Fine Adjustment Vernier to realize upto 1

mBar Resolution / Sensitivity• Very Low Leakage rate

PHP 60

• Ranges : Upto 200 bar• Fine Adjustment Vernier with Open /


• Medium : Oil (optional : Water)• Oil Reservoir Material : Transparent Acrylic

HHP 200

13KGC

PHP 2

PHP 10 / 25 / 35 / 40

PHP 60HHP 700 / 1000

HHP 200 / 350

Hydraulic DeadWeight TesterEquipped with Nickel Based Super Alloy Tube & Flanges30 Segments PID Temperature Control with Auto-tune FunctionHigh Purity Alumina Fiber Insulation

• Ranges : Upto 700 Bar• Accuracy : ±0.1% of Reading• Single / Dual Piston• Oil operated• Engineering Units : Bar / Kg/Cm2 / PSI.

(Kpa & Mpa also available).• Adjustable Foot & Spirit Level

H3000 SERIES• Ranges : Upto 700 Bar• Accuracy : ±0.0% of Reading• Hardened Special Steel Piston & &

Matching CylinderAdjustable Foot & Spirit Level

• Traceable to ISO/IEC 17025:2005 Accredited Calibration Lab

H6000 PORTABLE• Ranges : Upto 700 Bar• Accuracy : ±0.015% of Reading• Single / Dual Piston• Oil operated• Engineering Units : Bar / Kg/Cm2 / PSI• Adjustable Foot & Spirit Level• Calibrated to Standard Gravity

H6900 SERIES

• Ranges : Upto 700 Bar• Accuracy : ±0.05% of Reading• Single / Dual Piston• Oil operated• Engineering Units : Bar / Kg/Cm2 / PSI• Adjustable Foot & Spirit Level• Calibrated to Standard Gravity

H6000 SERIES• Ranges : 0.5 to 1 / 2 / 10 / 20 / 35 Bar• Accuracy : ±0.05% of Reading• Single Piston type• Non-Magnetic Stainless Steel Weight Sets• Air / Gas operated• Pressure generation direct via Priming

Pump & Ram Screw

P8000 SERIES• Ranges : Upto 700 Bar• Accuracy : ±0.015%/0.01% of Reading• Single / Dual Piston• Oil operated• Engineering Units : Bar / Kg/Cm2 / PSI• Adjustable Foot & Spirit Level• Calibrated to Standard Gravity

H6900N SERIES

• Ranges : Upto 700 Bar• Accuracy : ±0.025% of Reading• Single / Dual Piston• Oil operated• Engineering Units : Bar / Kg/Cm2 / PSI• Adjustable Foot & Spirit Level• Calibrated to Standard Gravity

H6600 SERIES• Ranges : 0.5 to 1 / 2 / 10 / 20 / 35 Bar• Accuracy : ±0.025% of Reading• Single Piston type• Non-Magnetic Stainless Steel Weight Sets• Air / Gas operated• Pressure generation direct via Priming

Pump & Ram Screw

P8600 SERIES• Ranges : Upto 700 Bar• Accuracy : ±0.1% of Reading• Hardened Special Steel Piston & &

Matching CylinderAdjustable Foot & Spirit Level

• Traceable to ISO/IEC 17025:2005 Accredited Calibration Lab

H3000 PORTABLE


• Type: Screw Pump• Range:700 / 1,000 / 1,400 bar• Priming Pump for initial pressures & Screw

RAM Pump for high pressures Priming Pump for initial pressures & Screw

• Medium: Oil

GCH–SP• Ranges : Upto 700 Bar• Accuracy : ±0.1% / ±0.05% of Reading\• Single Piston• Engineering Units : Bar / Kg/Cm2 / PSI• Accuracies Traceable to International

Standards• Fixed in a Sturdy Mobile Case for use in

Field Calibration

H3000/H6000

Vac

uu

m/P

ress

ure

Wei

gh

t Te

ster

Pn

eum

atic

Dea

dW

eig

ht

Test

erSc

rew

Pu

mp

Com

par

ison

Tes

ter

• Type: Screw Pump• Range: 250 bar• Priming Pump for initial pressures & Screw

RAM Pump for high pressures Priming Pump for initial pressures & Screw

• Medium: Oil

GCL-SP & GCH

KGC

• Ranges : -0.85bar to 1bar• Accuracy : ±0.05% of Reading• Hardened Special Steel Piston and Matching Cylinder• Non-Magnetic Stainless Steel Weight & Aluminium

Weights for Low/Initial Ranges Sets• 1/2” BSP (F) Swivel Test Port Connection• Accuracies Traceable to International Standards

P8000-SP-1/2 SERIES

• Ranges upto 700 Bar• Accuracy ±0.1% of Reading• Single or Dual Piston

H3000 SERIES (HYDRAULIC)

• Ranges upto 700 Bar• Accuracy ±0.05% of Reading• Single or Dual Piston

H6000 SERIES(Hydraulic)

Flow M

eterC

alibration

System

Flocal Series:

• This Process Flow Meter Calibration System (Automatic / Semi-automatic / Manual) is designed for Calibrating the “Accuracy of Measurements” of varieties of Flow Meters (Coriolis Mass, Electromagnetic, Ultrasonic, Venturi, Orifice Plate, Turbine Flow Meters etc.) typically in sizes from DN 15 to DN 300 through Gravimetric / Volumetric Method. (Calibration through Comparison Methods also are achievable) .

• The System’s Pump House accommodates an array of pumps from Very Low (1 m3/hr) to Very High (600 m3/hr x 2 Nos.) Flow Volume, with Frequency Converters (VFD’s) which control the complete water circulation between the Storage Reservoir & Collection Tanks. or lithium

• System’s Test Bed has Multiple (Three/Four) Test Lines to accommodate/mount ‘Units Under Test’ (UUT). Each Test Line is fitted with a Calibrated & Certified ‘Electromagnetic’ Flow Meter which serves as Flow Setting Device (Masters). One or more of Flow Meters (UUT’s) (Depending on the Sizes & Types of Flow Meters) can be Mounted & 3 or 4 Stainless Steel Tanks of Nominal Volumes from 150 Litres up to 12000 Litres are Mounted on Matching Weighing Scales/Load Cells. Pressure Measurement devices are installed at both Upstream/Downstream of the test line to measure the Inlet/Outlet Pressure of Water. Temperature Sensors with Transmitters are fitted in Each Collection/Weighing Tanks to measure the Temperature of Water collected.

• The speciality of the system is its Open Type Flow Diverter System that enables Diversion of Flow into Collection Tanks or to Water Reservoir per Flying Start/Stop Operation, without disturbing the Flow Rate. Precise Flow Control is achieved through employing VFD’s (Connected to Pumps/PLCs) & Electrically Operated Flow Control Valves. Very huge Underground Water Reservoir, with a capacity of 30,000/50,000 serves as uninterrupted Water source for performing flow Calibration through recycling.

• System’s Control Panel is designed in such a way to perform multiple tasks & to mount the Weighing Indicators & Multiple Control Switches/Knobs etc. Control Console is also equipped with a Mounted PC with preloaded Software - to handle/operate the process and Display the parameters like Flow Rate/Total Volume, Temperature & Pressure readings. Control Console is equipped with precise PLC system to take care of the Automation Process of the System & is loaded with In-house designed “Flocal” Software which generates Calibration Report.

Flow Meter measures the rate of Flow of Fluid which passes through it. Flow Meters are used in wide variety of Applications where Accurate Flow Measurements are critical in various Sectors like Energy, Power, Refineries, Utilities, Water Management, Aerospace, Pharmaceutical Industry etc.

In Critical Applications like these, it’s important toCalibrate the Flow Meters to enable make reliableMeasurements. Regular Calibrations assure you that the Flow Meter’s Measurements are as accurate as their specifications.

Even the most rugged Flow Meters can fall out of Calibration with performance degradation over time -even corrosion or dirt within the media that flows through can shift the Accuracy of the Flow Meters.

Nagman FLOCAL is designed with advanced features to derive the best Accuracy Levels of Calibration - by Comparison, Volumeteric & Gravimetric Methods - to suit the Accuracy Level of Meters under Test - including Turbine / Electromagnetic / Orifice / Vortex / Coriolis Mass / Ultrasonic / Rotameter / Positive Displacement Flow Meters - through both Manual & Automatic modes in accordance with ISO 4185 Standard or equivalent Standards.

Nagman’s FLOCAL is a complete Robust & Reliable System which is easy to maintain and to handle for long run without any trouble.


Flow

Met

erC

alib

rati

on S

yste

m

17KGC

GRAVIMETRIC METHOD

COMPARISON METHOD

• Available in automatic mode or manual mode• Meter size: DN 6 to DN 150• Units can be calibrated at one time: 1 or 2• Test Lines: 2 (Line 1 for DN 6 to DN 40; Line 2 for DN 50 to

DN 150)• Flow rate: Min 10 lpm, max 420 m3/hr• Calibrated accuracy: ±0.2%

FMCS 06150 SERIES

Gravimetric Calibration can be performed up to 6,000 Liters volume on the basis of 1 minute (60 Seconds) campaign (i.e. Flow rate 6000 LPM). For volume higher than 6,000 Liters (for e.g. flow rates higher than 6,000 liters / minute) Gravimetric Calibration Campaign time will be varied according to the set flow rate.

TROLLEY MOUNTED SKID MOUNTED

Compact Mobile Flow Meter Calibration Solution is for those who are limited for space and who need to move the system from site to side for on-the-spot calibration through Comparison Method with a Pre-calibrated Master Flow Meter

• DN 6 upto DN 50/80 (Maximum Flow 1500 LPM) System comes in 2 Types - Skid Mounted

• DN 6 upto DN 100 (Maximum Flow 2500 LPM) System is housed in a Mobile Skid on Wheels Which can be Lifted & Placed in a Truck Chasis for Mobility & or Stationed at a chosen Site Location

• Reference Masters :Electro-Magnetic Flow Meter with Calibrated Accuracy ±0.2%

• Enhanced Accuracy : Coriolis Mass Flow Meters with ±0.1% Accuracy can be used as Masters

• Method of calibration: Comparison Method

• System of operation: Manual• Calibration media: Water• One unit will be calibrated at one time• Flow control through VFD connected to

the pumps and manual flow throttle valves• Test bench is made of powder coated

mild steel. All wet parts shall be made of SS304

Cu

stomized

Calib

ration

Test Ben

ch

18

Nagman’s Calibration Systems – Test Benches, Workstations, Bench-tops & Mobile Units offer ultimate Flexibility through Custom Configuration / Preferences enabling Incorporation/Integration of World’s best – Furniture / Utility Modules / Calibration Standards and Test & Measuring Instruments.

Nagman also offer Cost Effective / Economy / Budget Solution Calibration Test Benches / Workstations / Mobile Units / Bench-tops – a Complete & Comprehensive range, integrating / interfacing Nagman’s own time tested, proven Temperature / Pressure / Multifunction Calibrator modules, Power Supplies & other Utilities etc.

With the wide choice & combination of Modules offered by Nagman, complete Calibration Systems for Dedicated / Single Parameter (Temperature / Pressure / Electrical & Electronics) or for Multiparameter – any combination of parameters can be Designed, Configured & “Built-up” to suit Customer’s requirement.

Test Bench Designs include Elevated / Table-top Device Panels (Single / Dual Deck) with Movable Under-Bench Cabinets / Cupboards / Trolleys etc.

Hi-tech Next Generation “Multi-Flex” Range of Test Benches offer space saving / multi-purpose “Push-Pull” (Electrically operated) Pop-in/Pop-out Device panels & Mounted Under-bench Trolleys.

Nagman also can offer only Bench-tops for Mounting on Customer Table / Furniture.

Nagman offer – for Remote / Distributed Field / Site Calibration work Compact Mobile Units – combination of Modules & Utilities mounted in a sturdy Trolley case.

Nagman can offer these Test Benches / Bench-tops – one or more – mounted in a Van or Container to serve as “Mobile Calibration Lab” for Site / Field Calibration assignments.

Calibration Accuracies (of Instrument Modules) are Traceable to International Standards & duly verified (where possible) (before integration) & Certified by Nagman’s NABL (equivalent to UKAS) Accredited – per ISO 17025:2005 – “Centre for Calibration”.

Nagman offer these Systems – optionally – with their powerful & unique Calibration Management Software – Calman Plus – interfacing / integrating the various Modules & enabling perform Calibration Routines Semi-automatically / Automatically. Advanced Version of CMS for uplinking to customer SAP System also available.

More than 1500 Systems are proving their mettle in industries & Projects Worldwide, through continued good performance.

Configurations

Eco-Frame :

Basic / Economy Version – High quality / Heavy Duty (& Powder coated) 40 mm square tube fabricated 4 or 5 legged Frame construction

“C” Frame :

Trendy, Ergonomic / ‘C’ Frame Design

Multi-Flex :

Electrically actuated ‘Pop-up’ Bench-tops & Space Saving Device Panels & ‘Push-Pull’ Under Bench Trolleys.

Bench-tops & Device Panels :

Bench-tops are designed to be mounted either on top of the Workbench, or in an Elevated position, with perforated sheet panel at the bottom (to accommodate tools, components storage boxes etc.).

Under Bench Cabinets :

Under Bench Cabinets (with 3 or 4 drawers of various heights), constructed in wood / steel, are provided with drawer guides and runners for smooth opening & closing. Cabinets are provided with central locking facility & castor wheels.

CALIBRATION & MEASUREMENT KIT

Cu

stom

ized

Cal

ibra

tion

Te

st B

ench

19KGC

COMMON CHOICE OF MODULES & UTILITIESTO BE MOUNTED ON DEVICE PANEL

calibration & measurement kit catalog j6...2 calibration & measurement kit introduction...

Documents