cadex electronics c8000 advanced battery testing system
TRANSCRIPT
Cadex C8000 Battery Test System
4 independent digital drivers for maximum flexibility 1.2 – 36V, 10A charge and discharge per channel 100W per channel on charge; 80W on discharge
Large test range, high power in compact housing
No need to buy modules for low and high power
Stability. Neighboring channels do not interfere
Digital Advantage
Algorithm includes multiple safety redundancies. Identifies faulty battery and terminates service.
Separate Battery and I/O Ports
The Battery Port accommodates basic tests The I/O Port assists in advanced tests
Building a laboratory system
The C8000 forms a command center to operate thermal chamber, external load bank, heating element, pressure gauge, cell monitoring, safety circuits, alarms and more.
Load Capture
Captures load signatures; uses simulated load as discharge protocol to check battery runtime
Setup of Load Capture Unit (LCU)
Takes load signatures of up to 100A Digitizes information for replay in the C8000 Maximum sample rate 500 microseconds (2kHz)
Dual Power Port Cable (DPPC)
The Dual Power Port Cable allows parallel connection to double the current to 20A (discharge only)
External load bank enables loads of up to 2,400W and 48V (one channel only)
Drives specified environmental chambers
Reads registers of SMBus batteries, identifies battery anomalies
Lifecycle test Load test
Simulates GSM, CDMA, etc. 50s intervals; minimum setting 500s
Provides battery stress test and stores data in PC-BatteryLab™
Monitoring individual cells
Four floating analog inputs enable voltage check of up to 5 cells; 4 direct and one by voltage extraction
Battery interface made easy
The Adapter Unit provides simple interfaceOver 1500 Custom Battery Adapters in stockBattery Adapters are programmed for a battery type
Adapter Unit Custom Battery Adapters
Markets
Colleges, universities, research centers Manufacturers, testing labs
Colleges, Universities, Research centers Testing labs Manufacturing