bizhub press c8000 specification & installation … minolta bizhub press c8000 specification...

Konica Minolta bizhub PRESS C8000Specification & Installation Guide

1

05/2011

bizhub PRESS C8000 Main Body SpecificationsType Console

Printing process 8 beam laser system with Quad PC drum tandem electrostatic process

Photoconductor OPC

Developing system Dry, dual-component reverse magnetic brush developing

Transfer method Belt

Fusing method Double (1st fusing inside the main body and 2nd fusing performed by Dual Fusing Unit EF-101)

Printing resolution True 1200 x 1200 dpi and 600 x 600 dpi resolution with 8 bit per color processing. Equivalent to offset printing of 3600 x 1200 dpi.

Gradation/Color 8 bits per channel, (C,M,Y,K) or 256 shades per color.

Copy paper (main body trays)

Fine/Plain/Color Specific: 17 lb. Bond to 110 lb. Cover, (64 g/m2 to 300 g/m2) Coated Paper: Laser and Offset Gloss and Laser and Offset Matte, 22 lb. Bond to 110 Cover, (81 g/m2 to 300 g/m2) Coated paper is available with the following condition: •Feedingasinglesheetfromamain body tray Tab paper (with orientation specified, simplex only) Labels and OHP transparencies are unavailable. Reverse delivery: 17 lb. Bond to 110 lb. Cover, (64 g/m2 to 300 g/m2) Duplex delivery: 17 lb. Bond to 110 lb. Cover, (64 g/m2 to 300 g/m2)

Copy paper (PF-704/705)

Fine/Plain/Color Specific: 17 lb. Bond to 140 lb. Cover, (64 g/m2 to 350 g/m2) Coated Paper: Laser and Offset Gloss and Laser and Offset Matte, 22 lb. Bond to 110 Cover*, (81 g/m2 to 300 g/m2)* Optional Trays 6 and 9 Simplex only Labels and OHP transparencies are unavailable. Reverse delivery: 17 lb. to 80 lb. Bond (64 g/m2 to 300 g/m2) Duplex delivery: 17 lb. to 80 lb. Bond (64 g/m2 to 300 g/m2)

Memory 512 MB x 6 (DRAM) + 160 GB x 6 SATA (HDD optional) HDD is required with Paper Feeder Unit (with scanner) PF-705 installed.

Original type Sheets, books (open spreads), three-dimensional objects

Original size Standard: Max. 11" x 17"L (A3L) Custom: 11.93" x 17.24" (303 mm x 438 mm) (for the original glass only)

Paper size (trays 1 to 3)

Standard: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L, SRA3L, A3L, B4L, A4P, SRA4P, B5L/P, A5L Custom: Max. 13" x 19.2" (330 mm x 487 mm) to min. 5.51" x 7.17" (140 mm x 182 mm) To select K sizes or Foolscap, or to switch JIS/ISO (JIS selected as default), please contact your service representative. The following standard sizes can be switched for detection. SRA3L, A4L, and A5L instead of 13" x 19.2"L, 8.5" x 11"L, and 5.5" x 8.5"L, SRA4L, 8" x 13"L, 8.12" x 13.2"L, or 8.5" x 13"L instead of 8.5" x 14"L, 9" x 11"P instead of 8.5" x 11"P

Paper edge deletion area

Leading and trailing edges: 4 mm or less Right and left edges: 3 mm or less Trailing edge of 53 lb. Bond (200 g/m2) or more: 6 mm or less

Paper tray capacity Main body trays 1 to 3: 500 sheets each (21 lb. Bond)

Warm-up time 6.5 minutes or less (20°C, 50% RH, 230 V)

Power requirements Rated voltage: AC 208 to 240 V Rated current: 24 A Rated frequency: 60 Hz

Power consumption 5,760 W Option configuration: same as above

Weight Main body: 990 lb. (450 kg) 2nd Fusing Unit EF-101: 210.5 lb. (95.5 kg)

Dimensions Main body: 35.4"(W)*1 x 37.4"(D)*2 x 51.9"(H)*3 (900 (W) x 950 (D) x 1,319 (H) mm) 2nd Fusing Unit EF-101: 19.7"(W) x 37.4"(D) x 40.2"(H) (500 (W) x 771 (D) x 1,020 (H) mm) Main body + 2nd Fusing Unit EF-101 + Paper Feeder Unit PF-704 + Relay Unit RU-508 + Large Capacity Stacker LS-505 + Perfect Binder PB-503 + Image Controller IC-306: 195.8"(W) x 37.4"(D)*2 x 51.9"(H)*3 (4,974 (W) x 950 (D) x 1,319 (H) mm) *1: Including control panel, exit tray, work table *2: Including rear duct *3: Including control panel

Operating temperature

10°C (50°F) to 30°C (86°F)

Humidity 10 to 80% RH

Duty Cycle

Up to 500,000 maximum monthly Letter/A4 impressions copy/print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on a continual basis.

2


Environmental RequirementsTemperature 50°F to 86°F (operating)

Humidity 10% to 80% (operating)

Engine Noise Printing: Copying: Standby:

55 db 57 db 39 db

Ozone Emission

Monochrome: Color:

1.5 mg/h or less 3.0 mg/h or less

Fusing Range 356˚ F (180˚ C)

Electrical RequirementsLine options Dedicated NEMA Diagram for L6-30R

Voltage 208-240V/60 Hz

Amperage 24 A or less

NEMA Part No. L6-30R

Cord Length 6 ft.

3

Space Requirements


RU-508 + EF-101 + bizhub PRESS C8000 + PF-705 + DF-522 + PF-704

RU-508 + EF-101 + bizhub PRESS C8000 + PF-704 + PF-704

inches (mm) inches (mm)

inches (mm)

inches (mm)

RU-508 + EF-101 + bizhub PRESS C8000 + PF-704 SD-506 + RU-508 + EF-101 + bizhub PRESS C8000 + PF-705 (+DF-622)

68.9"(1750)

64.94"(1649.5)

47.56"(1208)

40.16"(1020)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996)

39.12"(996) 3.94"

(100)

3.94"(100)

153.5"(3899)

153.5"(3899)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996)

39.12"(996)

68.9"(1750)

64.94"(1649.5)

47.56"(1208)

40.16"(1020)

68.9"(1750)

64.94"(1649.5)

40.16"(1020)

37.4"(950)

37.4"(950)

30.16"(766)

30.16"(766)

37.4"(900) 7.87"

(200) 7.87"(200)

7.87"(200) 82.68"

(2100) 83.31"(2116)

68.9"(1750)

64.94"(1649.5)

47.54"(1207.6)

40.16"(1020)

4

Space Requirements continued


RU-506 + GP-501 + RU-508 + EF-101 + bizhub PRESS C8000 + PF-705 + DF-522 + PF-704

RU-506 + GP-501 + RU-508 + EF-101 + bizhub PRESS C8000 + PF-704 + PF-704

RU-506 + GP-501 + RU-508 + EF-101 + bizhub PRESS C8000 + PF-705 + DF-522

68.9"(1750)

64.94"(1649.5)

47.56"(1208)

40.16"(1020)

68.9"(1750)

64.94"(1649.5)

47.56"(1208)

40.16"(1020)

68.9"(1750)

64.94"(1649.5)

47.54"(1207.6)

40.16"(1020)

3.94"(100) 179.29"

(4554)

140.08"(3558)

179.29"(4554)

16.14"(410)

12.01"(305)

13.78"(350)

12.01"(305)

13.78"(350)

12.01"(305)

13.78"(350)

19.57"(497)

35.43"(900)

39.12"(996)

39.12"(996)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996)

39.12"(996)

inches (mm)

inches (mm)

inches (mm)

3.94"(100)

3.94"(100)

5

Space Requirements


RU-506 + GP-501 + RU-508 + EF-101 + bizhub PRESS C8000 + PF-704

RU-506 + GP-501 + RU-508 + EF-101 + bizhub PRESS C8000

68.9"(1750)

64.94"(1649.5)

40.16"(1020)

68.9"(1750)

64.94"(1649.5)

47.54"(1207.6)

40.16"(1020)

109.70" (2786.3)

12.01"(305)

13.78"(350)

16.14"(410)

19.57"(497)

35.43"(900)

140.08"(3558)

12.01"(305)

13.78"(350)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996) 3.94"

(100)

3.94"(100) 8.83" (224.3)

inches (mm)

inches (mm)

6



RU-508 + EF-101 + bizhub PRESS C8000 + PF-705 + DF-522

RU-508 + EF-101 + bizhub PRESS C8000 + PF-704

RU-508 + EF-101 + bizhub PRESS C8000

inches (mm)

inches (mm)

inches (mm)

68.9"(1750)

64.94"(1649.5)

47.56"(1208)

40.16"(1020)

35.43"(900)

39.12"(996)

68.9"(1750)

64.94"(1649.5)

47.54"(1207.6)

40.16"(1020)

68.9"(1750)

64.94"(1649.5)

40.16"(1020)

16.14"(410)

19.57"(497)

35.43"(900)

39.12"(996)

16.14"(410)

19.57"(497)

35.43"(900) 16.14"(410)

3.94"(100)

3.94"(100)

3.94"(100)

114.3"(2903)

114.3"(2903)

83.91"(2131.3) 8.83"(224.3)

19.57"(497)

7

Space Requirements


Total width (except Image Controller IC-306)188.31"(4783): FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)188.31"(4783): FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)149.09"(3787): FD-503 + (RU-508 + EF-101 + Main body + PF-705)149.09"(3787): FD-503 + (RU-508 + EF-101 + Main body + PF-704)118.71"(3015.3): FD-503 + (RU-508 + EF-101 + Main body)214.09"(5438): FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)214.09"(5438): FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)174.88"(4442): FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)174.88"(4442): FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)144.5"(3670.3): FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)188.35"(4784): LS-505 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)188.35"(4784): LS-505 + (RU-508 + EF-101 + Main body + PF-704 x 2)149.13"(3788): LS-505 + (RU-508 + EF-101 + Main body + PF-705)149.13"(3788): LS-505 + (RU-508 + EF-101 + Main body + PF-704)118.75"(3016.3): LS-505 + (RU-508 + EF-101 + Main body)

68.9"(1750)

40.16"(1020)

68.9"(1750)

40.16"(1020)

48.46"(1231)

3.94"(100)

10.51"(267) 4.61"

(117)

15.75"(400)

30.91"(785) 3.94"

(100)

inches (mm)

inches (mm)

8



Total width (except Image Controller IC-306)219.25"(5569): LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)219.25"(5569): LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704 x 2)180.04"(4573): LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705)180.04"(4573): LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704)149.66"(3801.3): LS-505 x 2 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)193.46"(4914): FS-521 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)193.46"(4914): FS-521 + (RU-508 + EF-101 + Main body + PF-704 x 2)154.25"(3918): FS-521 + (RU-508 + EF-101 + Main body + PF-705)154.25"(3918): FS-521 + (RU-508 + EF-101 + Main body + PF-704)123.87"(3146.3): FS-521 + (RU-508 + EF-101 + Main body)219.25"(5569): FS-521 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)219.25"(5569): FS-521 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)180.04"(4573): FS-521 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)180.04"(4573): FS-521 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)149.66"(3801.3): FS-521 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

68.9"(1750)

40.16"(1020)

3.94"(100)

3.94"(100)

4.61"(117)

10"(254)

21.42"(544)

30.91"(785)

30.91"(785)

9

Space Requirements


Total width (except Image Controller IC-306)203.5"(5169): SD-506 + (RU-508 + EF-101 + Main body + PF-704 x 2)164.29"(4173): SD-506 + (RU-508 + EF-101 + Main body + PF-705)164.29"(4173): SD-506 + (RU-508 + EF-101 + Main body + PF-704)159.7"(4056.3): SD-506 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)210.98"(5359): PB-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)210.98"(5359): PB-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)171.77"(4363): PB-503 + (RU-508 + EF-101 + Main body + PF-705)171.77"(4363): PB-503 + (RU-508 + EF-101 + Main body + PF-704)141.39"(3591.3): PB-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)204.09"(5184): LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)204.09"(5184): LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)164.88"(4188): LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)164.88"(4188): LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)134.5"(3416.3): LS-505 + FD-503 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

68.9"(1750)

40.16"(1020)

68.9"(1750)

40.16"(1020)

48.15"(1223)

3.94"(100)

3.94"(100)

3.94"(100)

30.91"(785)

15.75"(400)

53.54"(1360)

46.06"(1170)

10



Total width (except Image Controller IC-306)219.25"(5569): SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)219.25"(5569): SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)180.04"(4573): SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)180.04"(4573): SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)121.31"(3801.3): SD-506 + FD-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)209.21"(5314): FS-521 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)209.21"(5314): FS-521 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)170"(4318): FS-521 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)170"(4318): FS-521 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)139.62"(3546.3): FS-521 + FD-503 + (RU-508 + EF-101 + Main body)235"(5969): FS-521 + FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)235"(5969): FS-521 + FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)195.79"(4973): FS-521 + FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)195.79"(4973): FS-521 + FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)165.41"(4201.3): FS-521 + FD-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)250.16"(6354): SD-506 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)250.16"(6354): SD-506 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)210.94"(5358): SD-506 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)210.94"(5358): SD-506 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)180.56"(4586.3): SD-506 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

3.94"(100)

46.06"(1170)

15.75"(400)

68.9"(1750)

40.16"(1020)

3.94"(100)

15.75"(400)

68.9"(1750)

40.16"(1020)

15.75"(400)

21.42"(544)

3.94"(100) 4.61"

(117)

10"(254)

30.91"(785)

46.06"(1170)

11

Space Requirements


Total width (except Image Controller IC-306)240.11"(6099): FS-521 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)240.11"(6099): FS-521 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)200.91"(5103): FS-521 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)200.91"(5103): FS-521 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)170.52"(4331.3): FS-521 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)257.64"(6544): PB-503 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)257.64"(6544): PB-503 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)218.43"(5548): PB-503 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)218.43"(5548): PB-503 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)188.04"(4776.3): PB-503 + LS-505 + FD-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)255.28"(6484): FS-521 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)255.28"(6484): FS-521 + SD-506 + FD-503 +

68.9"(1750)

40.16"(1020)

15.75"(400)

21.42"(544)

3.94"(100) 4.61"

(117)

10"(254)

30.91"(785)

68.9"(1750)

40.16"(1020)

15.75"(400)

21.42"(544)

3.94"(100) 4.61"

(117)

10"(254)

30.91"(785)

(RU-508 + EF-101 + Main body + PF-704 x 2)215.2"(5488): FS-521 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)215.2"(5488): FS-521 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)185.68"(4716.3): FS-521 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

48.15"(1223)

68.9"(1750)

40.16"(1020)

15.75"(400)

21.42"(544)

3.94"(100) 4.61"

(117)

3.94"(100)

10"(254)

30.91"(785)

15.75"(400)

30.91"(785)

68.9"(1750)

40.16"(1020)

15.75"(400)

21.42"(544)

3.94"(100) 4.61"

(117)

10"(254)

40.06"(1170)

53.54"(1360)

12



Total width (except Image Controller IC-306)272.8"(6929): PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)272.8"(6929): PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)233.58"(5933): PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)233.58"(5933): PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)203.2"(5161.3): PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)308.82"(7844): FS-521 + PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)308.82"(7844): FS-521 + PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)269.61"(6848): FS-521 + PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)269.61"(6848): FS-521 + PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)239.22"(6076.3): FS-521 + PB-503 + SD-506 + FD-503 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)235"(5969): LS-505 x 2 + FD-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)235"(5969): LS-505 x 2 + FD-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)195.79"(4973): LS-505 x 2 + FD-503 + (RU-508 + EF-101 + Main body + PF-705)195.79"(4973): LS-505 x 2 + FD-503 + (RU-508 + EF-101 + Main body + PF-704)165.41"(4201.3): LS-505 x 2 + FD-503 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

inches (mm)

48.15"(1223)

68.9"(1750)

40.16"(1020)

3.94"(100)

15.75"(400)

40.06"(1170)

53.54"(1360)

68.9"(1750)

40.16"(1020)

21.42"(544)

3.94"(100) 4.61"

(117)

68.9"(1750)

40.16"(1020)

3.94"(100)

15.75"(400)

15.75"(400)

40.06"(1170)

53.54"(1360)

10"(254)

30.91"(785)

30.91"(785)

13

Space Requirements


Total width (except Image Controller IC-306)241.89"(6144): PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)241.89"(6144): PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-704 x 2)202.68"(5148): PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-705)202.68"(5148): PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-704)172.3"(4376.3): PB-503 + LS-505 + (RU-508 + EF-101 + Main body)267.68"(6799): PB-503 + LS-505 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)267.68"(6799): PB-503 + LS-505 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)228.46"(5803): PB-503 + LS-505 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)228.46"(5803): PB-503 + LS-505 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)198.08"(5031.3): PB-503 + LS-505 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)270.43"(6869): FS-521 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)270.43"(6869): FS-521 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-704 x 2)231.22"(5873): FS-521 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-705)231.22"(5873): FS-521 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-704)200.84"(5101.3): FS-521 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

48.15"(1223)

68.9"(1750)

40.16"(1020)

3.94"(100)

68.9"(1750)

40.16"(1020)

53.54"(1360)

30.91"(785)

40.06"(1170)

21.42"(544)

10"(254)

30.91"(785)

3.94"(100) 4.61"

(117)

14



Total width (except Image Controller IC-306)287.95"(7314): PB-503 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)287.95"(7314): PB-503 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-704 x 2)248.74"(6318): PB-503 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-705)248.74"(6318): PB-503 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body + PF-704)218.36"(5546.3): PB-503 + SD-506 + LS-505 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)277.91"(7059): FS-521 + PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)277.91"(7059): FS-521 + PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-704 x 2)283.7"(6063): FS-521 + PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-705)283.7"(6063): FS-521 + PB-503 + LS-505 + (RU-508 + EF-101 + Main body + PF-704)208.32"(5291.3): FS-521 + PB-503 + LS-505 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)265.31"(6739): SD-506 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)265.31"(6739): SD-506 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704 x 2)226.1"(5743): SD-506 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705)226.1"(5743): SD-506 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704)195.72"(4971.3): SD-506 + LS-505 x 2 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

inches (mm)

48.15"(1223)

68.9"(1750)

40.16"(1020)

3.94"(100)

53.54"(1360)

53.54"(1360)

30.91"(785)

40.06"(1170)

68.9"(1750)

40.16"(1020)

21.42"(544)

10"(254)

30.91"(785)

3.94"(100) 4.61"

(117)

68.9"(1750)

40.16"(1020)

3.94"(100)

30.91"(785)

30.91"(785)

40.06"(1170)

15

Space Requirements


Total width (except Image Controller IC-306)255.28"(6484): FS-521 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)255.28"(6484): FS-521 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704 x 2)216.06"(5488): FS-521 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705)216.06"(5488): FS-521 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704)185.68"(4716.3): FS-521 + LS-505 x 2 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)272.8"(6929): PB-503 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)272.8"(6929): PB-503 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704 x 2)233.58"(5933): PB-503 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-705)233.58"(5933): PB-503 + LS-505 x 2 + (RU-508 + EF-101 + Main body + PF-704)203.2"(5161.3): PB-503 + LS-505 x 2 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

21.42"(544)

10"(254)

30.91"(785)

30.91"(785)

30.91"(785)

30.91"(785)

3.94"(100) 4.61"

(117)

48.15"(1223)

68.9"(1750)

40.16"(1020)

3.94"(100)

53.54"(1360)

16



Total width (except Image Controller IC-306)239.53"(6084): FS-521 + SD-506 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)239.53"(6084): FS-521 + SD-506 + (RU-508 + EF-101 + Main body + PF-704 x 2)200.31"(5088): FS-521 + SD-506 + (RU-508 + EF-101 + Main body + PF-705)200.31"(5088): FS-521 + SD-506 + (RU-508 + EF-101 + Main body + PF-704)169.93"(4316.3): FS-521 + SD-506 + (RU-508 + EF-101 + Main body)265.31"(6739): FS-521 + SD-506 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)265.31"(6739): FS-521 + SD-506 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)226.1"(5743): FS-521 + SD-506 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)226.1"(5743): FS-521 + SD-506 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)195.72"(4971.3): FS-521 + SD-506 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)257.05"(6529): PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)257.05"(6529): PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-704 x 2)217.83"(5533): PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-705)217.83"(5533): PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-704)187.45"(4761.3): PB-503 + SD-506 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

21.42"(544)

10"(254)

3.94"(100) 4.61"

(117)

46.06"(1170)

46.06"(1170)

68.9"(1750)

40.16"(1020)

48.15"(1223)

3.94"(100)

53.54"(1360)

17

Space Requirements


Total width (except Image Controller IC-306)293.07"(7444): FS-521 + PB-503 + SD-506 +

) :

(RU-508 + EF-101 + Main body + PF-705 + PF-704)293.07"(7444): FS-521 + PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-704 x 2)253.86"(6448): FS-521 + PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-705)253.86"(6448): FS-521 + PB-503 + SD-506 + (RU-508 + EF-101 + Main body + PF-704)223.48"(5676.3): FS-521 + PB-503 + SD-506 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)247.0"(6274): FS-521 + PB-503 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)247.0"(6274): FS-521 + PB-503 + (RU-508 + EF-101 + Main body + PF-704 x 2)207.8"(5278): FS-521 + PB-503 + (RU-508 + EF-101 + Main body + PF-705)207.8"(5278): FS-521 + PB-503 + (RU-508 + EF-101 + Main body + PF-704)177.41"(4506.3): FS-521 + PB-503 + (RU-508 + EF-101 + Main body)272.8"(6929): FS-521 + PB-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705 + PF-704)272.8"(6929): FS-521 + PB-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704 x 2)233.58"(5933): FS-521 + PB-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-705)233.58"(5933): FS-521 + PB-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body + PF-704)203.2"(5161.3): FS-521 + PB-503 + (RU-506 + GP-501 + RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

68.9"(1750)

40.16"(1020)

21.42"(544)

10"(254)

3.94"(100) 4.61"

(117)

46.06"(1170)

53.54"(1360)

68.9"(1750)

40.16"(1020)

21.42"(544)

10"(254)

3.94"(100) 4.61"

(117)

53.54"(1360)

18



Total width (except Image Controller IC-306)188.56"(4789.5): FS-612 + PI-502 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)188.56"(4789.5): FS-612 + PI-502 + (RU-508 + EF-101 + Main body + PF-704 x 2)148.35"(3793.5): FS-612 + PI-502 + (RU-508 + EF-101 + Main body + PF-705)148.35"(3793.5): FS-612 + PI-502 + (RU-508 + EF-101 + Main body + PF-704)118.97"(3021.8): FS-612 + PI-502 + (RU-508 + EF-101 + Main body)

Total width (except Image Controller IC-306)188.56"(4789.5): FS-612 + (RU-508 + EF-101 + Main body + PF-705 + PF-704)188.56"(4789.5): FS-612 + (RU-508 + EF-101 + Main body + PF-704 x 2)148.35"(3793.5): FS-612 + (RU-508 + EF-101 + Main body + PF-705)148.35"(3793.5): FS-612 + (RU-508 + EF-101 + Main body + PF-704)118.97"(3021.8): FS-612 + (RU-508 + EF-101 + Main body)

inches (mm)

inches (mm)

68.9"(1750)

38.98"(990)

68.9"(1750)

38.98"(990)

44.49"(1130)

3.94"(100) 4.57"

(116)

16.7" (424)9.86" (250.5)

3.94"(100) 4.57"

(116)

16.7" (424)9.86" (250.5)

19

Component Considerations


2nd Fusing Unit EF-101

Type External finish fusing device

Function • Evenouttheglossysurfaceofcoatedpaper. • Enablesfusingonbothsidesinonepassbyadoptingtheupper/ lower belt fusing system. • Feedingthinpaperisavailablebysettingabypassthatexcludes

the 2nd fusing unit.

Paper weight 2nd fusing line: 37 lb. Bond or more (Plain), 28 lb. Bond or more (Coated) Bypass line: less than 37 lb. Bond (Plain), less than 28 lb. Bond (Coated)

Paper size Conforms to that of main body.

Paper type Conforms to that of main body.

Printing speed 80 ppm: 36 lb. Bond or less 70 ppm: 37 to 80 lb. Bond 40 ppm: 81 lb. or more Printing speed is common to Plain and Coated paper, A4/Letter or smaller.

Warm-up time 6.5 minutes or less (20°C, 50% RH, 230 V)

Dimensions 19.6" (W) x 30.5" (D) x 40.1" (H); (497 (W) x 774 (D) x 1,019 (H) mm)

Weight Approx. 210.5 lbs. (95.5 kg)

Power requirements Rated voltage: AC 208 to 240 V Rated current: 16 A Rated frequency: 60 Hz NEMA: 6-20R

Power consumption 2,970 W

Relay Unit RU-508

Type Relay unit with paper-cooling and curl adjustment functions

Mechanical curl adjustment Adjust paper curl by letting it through a zigzag path, then deliver paper accelerating it according to the basic line speed determined for finishing operation.

Humidifying curl adjustment Humidify paper using Humidifier HM-101 (option), then deliver paper accelerating it according to the basic line speed determined for finishing operation.

Straight delivery Deliver paper accelerating it according to the basic line speed determined for finishing operation, without making mechanical or humidifying curl adjustment.

Reverse delivery Reverse and deliver paper accelerating it according to the basic line speed determined for finishing operation.

Color density adjustment Measure the color density of the density patch printed on paper, in order to use it as the data for image stabilization adjustment.

Conveyance speed 80 sheets/min. (8.5" x 11"P, A4P)

Paper size 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5L/P, B6L, A6L, Foolscap, a9" x 11"P, Custom, Tab Paper Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.74" x 5.47" (95 mm x 139 mm)

FS-521 SD-506 LS-505 RU-508 EF-101 PRESS C8000

IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

20

Component Considerations continued


Relay Unit RU-508 continued

Paper type Recommended for main body

Paper weight 17 to 93 lb. Bond (64 g/m2 to 350 g/m2) 17 to 80 lb. Bond (64 g/m2 to 300 g/m2) in reverse delivery

Dimensions 16.1"(W) x 28.9"(D) x 40.2"(H); (410 (W) x 735 (D) x 1,020 (H) mm)

Weight Approx. 176.4 lbs. (80 kg)

Power requirements AC 120V 3.6A; NEMA: 5-20R

Power source See ‘Power Source’ section for additional detailed image.

Humidifier HM-101

Type Paper humidifying kit

Function Humidify paper on both front and back sides uniformly to make a curl adjustment.

Processing speed 80 sheets/min.

Humidifier tank capacity 20 liters (equivalent of approx. 100,000 prints)

Paper size Conforms to that of Relay Unit RU-508

Paper type Recommended for main body (except Coated)

Paper weight 17 to 93 lb Bond (64 g/m2 to 350 g/m2)

Dimensions Humidifying section: 13.3"(W) x 25.4"(D) x 9.7"(H); (339 (W) x 646 (D) x 246(H) mm)

Weight Approx. 22 lbs. (10 kg)

Power source 24 V DC inlet (internal)

Paper Feeder Unit PF-704

Function Feed paper into main body

Configuration 3 paper trays

Paper tray capacity 1,390 sheets (21 lb. Bond) x 2 + 1,850 sheets (21 lb. Bond) x1

Paper size (1st unit) Standard: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4P, A4P, B5L/P, A5P, B6L, A6L The following standard sizes can be switched for detection. A5L and A4 instead of 5.5" x 8.5"L and 8.5" x 11"L, SRA4L, 8" x 13"L, 8.12" x 13.2"L, 8.25" x 13"L, or 8.5" x 13"L instead of 8.5" x 14"L, 9" x 11"P instead of 8.5" x 11"P Custom: Max. 13" x 19.2" (330 mm x 487 mm) to min. 3.94" x 5.51" (100 mm x 140 mm)

Paper size (2nd unit) Standard: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4P, A4P, B5L/P, A5P The following standard sizes can be switched for detection. A5L and A4 instead of 5.5" x 8.5"L and 8.5" x 11"L, SRA4L, 8" x 13"L, 8.12" x 13.2"L, 8.25" x 13"L, or 8.5" x 13"L instead of 8.5" x 14"L, 9" x 11"P instead of 8.5" x 11"P

continued


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

21



Paper Feeder Unit PF-704 continued

Paper type Plain, Fine, Coat, Color

Paper weight 17 to 93 lb. Bond (64 g/m2 to 350 g/m2)



Power source/ DC: 5 V, 12 V, –12 V (24 V supplied from DC inside the PF) requirements AC1 (supplied from main body, for heater): 180 to 264 V (50/60 Hz)

AC2 (supplied from outlet, for HT and DC): 120 V ± 10% (50/60 Hz) NEMA: 5-20R; See ‘Power Source’ section for additional detailed image.

Power consumption DC: 70 W or less; AC: 580 W or less

Paper Feeder Unit PF-705*

Function Feed paper into main body

Configuration 3 paper trays

Paper size Standard: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L*1, A4P, SRA4P, B5L/P, A5P, B6L, A6L The following standard sizes can be switched for detection. A5L and A4 instead of 5.5" x 8.5"L and 8.5" x 11"L, SRA4L, 8" x 13"L, 8.12" x 13.2"L, 8.25" x 13"L, or 8.5" x 13"L instead of 8.5" x 14"L, 9" x 11"P instead of 8.5" x 11"P Custom: Max. 13" x 19.2" (330 mm x 487 mm) to min., 3.94" x 5.51" (100 mm x 140 mm)

Paper type Plain, Fine, Coat, Color


Paper tray capacity 1,390 sheets (21 lb Bond) x 2 + 1,850 sheets (21 lb Bond) x 1



Power source/ DC: 5 V, 12 V, –12 V (24 V supplied from internal DC) requirements AC1 (supplied from main body, for heater): 180 to 264 V (50/60 Hz)

AC2 (supplied from outlet, for HT and DC): 120 V ± 10% (50/60 Hz) NEMA: 5-20R; See ‘Power Source’ section for additional detailed image.

Power consumption DC: 270 W or less; AC: 580 W or less

*Requires HD-514 and PH-101 for copying and scanning.

Dehumidifier Heater HT-506

Function Dehumidifier of fan heater type

Dimensions Dehumidifier fan unit + supply/exhaust air duct: 11.5"(W) x 13.2"(D) x 6.9"(H), (293 (W) x 336 (D) x 176 (H) mm) Power supply unit: 8.3"(W) x 4.2"(D) x 3.0"(H), (212 (W) x 106 (D) x 77 (H) mm)


Power source/requirements DC: 24 V, 5V; AC: 180 to 264 V (50/60Hz); NEMA: 5-20R; See ‘Power Source’ section for additional detailed image.

Power consumption DC: 6 W or less; AC: 384 W or less (per unit)


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

22



Finisher FS-521

Type Staple-cut type stapling equipment

Delivery modes Straight mode Deliver non-offset sets to the primary (main) tray. Shift mode Offset each set upon exit to the primary (main) tray. Secondary (sub) tray mode Deliver non-offset sets to the secondary (sub) tray. Staple mode Deliver stapled sets to the primary (main) tray. Subset staple mode Deliver stapled sets or single sheet to the primary (main) tray.

Available sizes Large sizes: 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, A3L, in primary (main) tray B4L, Foolscap, SRA3L, SRA4L/P, Custom (Max. 12.76" x 18.11" (straight/offset delivery) (324 mm x 460 mm))

Small sizes: 8.5" x 11"L/P, A4L/P, B5L/P, 9" x 11"P Extra-small sizes: 5.5" x 8.5"L/P, A5L/P, B6L Others: Custom (Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 5.83" x 5.47" (148 mm x 139mm)), Tab Paper (only with the tab side ahead in output direction) Straight delivery only: 13" x 19.2"L, 5.5" x 8.5"L, B6L, Custom (Max. 13" x 19.2" (331 mm x 483 mm) to min. 5.04" x 5.47" (128 mm x 139 mm))

Available weight 17 to 93 lb. Bond (64 g/m2 to 350 g/m2) in primary (main) tray (straight/offset delivery)

Available sizes in primary 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L, (main) tray (Staple) A3L, B4L, A4L/P, SRA4L/P, B5P, A5P, Foolscap, 9" x 11"P,

Custom, Tab Paper (only with the tab side ahead in output direction) Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 7.99" x 5.47" (203 mm x 139 mm)

Available weight in primary 17 to 65 lb. Bond (64 g/m2 to 244 g/m2) (main) tray (Staple)

Available sizes in 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, secondary (sub) tray 5.5" x 8.5"L/P, SRA3L, A3L, B4L*1, A4L/P, SRA4L/P,

B5L/P*1, A5L/P, B6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.94" x 5.24" (100 mm x 133*2 mm) *1: B4 and B5 are JIS standard sizes. If ISO standard sizes are desired, please contact your service representative. *2: Only when FS-521 is installed as the sole option. It will be v5.47" (139 mm) when any other option is installed.

Available weight in 17 to 65 lb. Bond (64 g/m2 to 244 g/m2) secondary (sub) tray

Dimensions 21.42"(W)* x 28.46"(D) x 40.16"(H); (544 (W)* x 723 (D) x 1,020 (H) mm) * Width including primary (main) tray: 31.42 inches/ 36.02 inches (with the edge pulled out)


Power source 24/5 VDC (supplied from Relay Unit RU-508, or from Perfect Binder PB-503 when connected) See ‘Power Source’ section for additional detailed image.

Power consumption 110 VA


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

23



Folding Unit FD-503

Function Punch, multi-folding, post inserting of single sheet

Number of punch holes 2 or 3

Hole diameter 2 holes: 0.256" ± 0.020" (6.5mm± 0.5 mm) 3 holes: 0.315" ± 0.020" (8.0mm± 0.5 mm)

Hole pitch 2 holes: 2.756" ± 0.020" (70mm± 0.5mm) 3 holes: 4.252" ± 0.020" (108mm± 0.5 mm)

Hole vertical position 2 holes: 0.413" ± 0.157" (10.5 mm ± 4 mm) 3 holes: 0.374" ± 0.157" (9.5 mm ± 4 mm)

Paper Weight in Punch Mode 17 to 57 lb Bond (64 g/m2 to 216 g/m2)

Available Sizes 2 holes: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in Punch Mode 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L, A4L/P, B5L/P,

A5L/P, Foolscap, 9" x 11"P, Tab paper 3 holes: 12" x 18"L, 11" x 17"L, 8.5" x 11"P, SRA3L, A3L, B4L, SRA4L, A4P, B5P, 9" x 11"P, Tab paper

Fold type Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold, Double Parallel, Gate

Paper weight in Fold mode Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold: 17 to 35 lb Bond (64 g/m2 to 130 g/m2) Double Parallel, Gate: 17 to 24 lb Bond (64 g/m2 to 91 g/m2)

Available Sizes in Fold Mode 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, Custom Max. 12.01" x 18.03" (305 mm x 458 mm) to min. 8.27" x 10.98" (210 mm x 279 mm)

Straight Delivery Deliver sheets output from the main body to the primary (main) tray or secondary (sub) tray.

Paper Weight 13 to 93 lb Bond (50 g/m2 to 350 g/m2) in Straight Delivery

Available Sizes 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in Straight Delivery 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P,

A5L/P, B6L, Foolscap, A6L, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. 3.94" x 5.51" (100 mm x 140 mm)

Paper Types in Post Inserter Plain, recycled, fine, special

Paper Weight in Post Inserter 13 to 80 lb Bond (50 g/m2 to 300 g/m2)

Available Sizes Standard (detectable sizes): 13" x 19.2"L, 12" x 18"L, 11" x 17"L, in Post Inserter 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5" P, SRA3L, A3L, B4L,

SRA4L/P, A4L/P, B5L/P, A5 P, Foolscap, Custom, Tab Paper Max. 13" x 19.2" (331 mm x 483 mm) to min. 7.17" x 10.98" (182 mm x 279 mm)

Stack Capacity 500 sheets (21 lb Bond) for each tray of PI Upper/Lower Tray

Dimensions 15.75"*(W) x 28.46"(D) x 48.46"(H)"; (400* (W) x 723 (D) x 1,231 (H) mm) * Width including primary (main) tray: 26.26"/ 30.87" (with the edge pulled out)


Power source 100 to 240 VAC; NEMA: 5-20R; See ‘Power Source’ section for additional detailed image.


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

24



Large Capacity Stacker LS-505

Type Grip conveyer type horizontal stacking equipment

Function Stacker tray Sort Deliver non-offset sets to the stacker tray. Secondary (sub) tray Deliver non-offset sets to the secondary (sub) tray. Stacker tray Offset Sort Offset sorted sets by 20 mm upon exit to the stacker tray.

Available sizes 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in primary (main) tray SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5P, A5P, Foolscap, (straight/offset delivery) 9" x 11"P, Custom (max. 13" x 19.2" (330 mm x 487 mm)

to min. 3.94" x 5.51" (100 mm x 140 mm)) Tab paper (1 to 15 tabs) (However, output sets cannot be offset when including tabbed sheets.)

Available weight 17 to 68 lb. Bond (64 g/m2 to 256 g/m2) in primary (main) tray (straight/offset delivery)

Available sizes 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in secondary (sub) tray 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L, A4L/P, B5L/P,

A5 L/P, B6L, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.74" x 5.47" (95 mm x 139 mm)

Available weight 17 to 93 lb. (64 g/m2 to 350 g/m2) in secondary (sub) tray




Power consumption 143 W or less

Saddle Stitcher SD-506

Type Multi folding, folding and stapling, trimming, straight delivery

Delivery modes Secondary (sub) tray delivery Deliver non-processed sheets to the secondary (sub) tray. Connective delivery Deliver non-processed sheets to another finishing equipment. Fold & Staple Output saddle-stitched sets. Fold & Staple with Trimming Output saddle-stitched and trimmed sets. Multi Half Fold Output a sheet or set of paper folded in half. Multi Half Fold with Trimming Output a sheet or set of paper half-folded and trimmed in the edge. Multi Tri-Fold Output a sheet or set of paper folded in three.

continued


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

25



Saddle Stitcher SD-506 continued

Multi folding Folding type Half fold, tri-fold Paper size Multi Half Fold: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3 L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Multi Tri-Fold: 8.5" x 11"L, A4L Paper weight 17 to 65 lb. Bond for half fold, 17 to 24 lb. Bond for tri-fold Number of sheets per folded set 5 sheets (17 to 22 lb. Bond) in half fold/tri-fold 3 sheets (23 to 24 lb. Bond) in tri-fold 3 sheets (23 to 34 lb. Bond), 2 sheets (35 to 65 lb. Bond) in half fold Stack capacity 30 sets for half fold 20 sets for tri-fold Provided with full-load detection function

Folding and stapling Paper size 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Paper weight 17 to 65 lb. Bond Binding pitch Variable (3.54" to 6.50" (90 to 165mm))

Trimming Paper size 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, SRA3L, A3L, B4L, SRA4L, A4L, B5L, Foolscap, Custom Max. 12.76" x 18.23" (324 mm x 463 mm) to min. 7.17" x 10.12" (182 mm x 257 mm) Paper weight 17 to 65 lb. Bond Trimming capacity 50 sheets (21 lb. Bond) x 2, or 49 sheets (21 lb. Bond) + 1 (53 lb. Bond) x 2

Straight delivery Paper size 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5 L/P, A5L/P, B6L, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. 3.94" x 5.51" (100 mm x 140 mm) Paper weight 17 to 93 lb. Bond



Power consumption 270 W


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

26



Perfect Binder PB-503

Type Console, hot-melt type perfect binder

Function Perfect binding Output perfect-bound books to the perfect binder tray. Secondary (sub) tray Deliver non-processed sheets to the secondary (sub) tray. Connective delivery Deliver non-processed sheets to another finishing equipment (Finisher FS-521).

Number of sheets per set 10 to 300 sheets, or within 30 mm thick 10 to 150 sheets, or within 15 mm thick for colored/matted paper Up to 4 sheets of z-folded insertions can be included in a set in duplex printing, up to 2 sheets in simplex printing.

Paper size Perfect binder tray Body: 8.5" x 11"L, 5.5" x 8.5"L/P, A4P, B5P, A5L/P; max. 12.09" x 8.70" (307 mm x 221 mm) to min. 5.47" x 8.23" (139 mm x 210 mm) Cover: max. 12.09" x 8.70" (307 mm x 221 mm) to min. 5.47" x 8.23" (139 mm x 210 mm) Secondary (sub) tray 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P, A5P, Foolscap, A6L, 9" x 11"P, Custom, Tab Paper (only with the tab side ahead in output direction) Max. 13" x 19.2" (330 mm x 487 mm) to min. 3.94" x 5.51" (100 mm x 140 mm)

Paper weight Perfect binder tray 17 to 28 lb Bond (64 g/m2 to 105 g/m2) for body 22 to 56 lb Bond (81 g/m2 to 210 g/m2) for cover Secondary (sub) tray 17 to 93 lb Bond (64 g/m2 to 350 g/m2)

Paper type Perfect binder tray Plain, Fine for body, Fine, Coat for cover Secondary (sub) tray All types available in main body

Stack capacity Cover tray 1,000 sheets (21 lb Bond)/ 500 sheets (57 lb Bond) Perfect binder tray 1 set of maximum thickness (approx. 1.18"/30mm) x 2 columns (approx. 6,600 sheets) The full-load detection function activated on perfect binder limits the capacity as follows in order to prevent the piled sets from collapsing. 10 to 30-sheet-bound set: 50 sets 31 to 150-sheet-bound set: 35 sets or until detected as full load 151 to 300-sheet-bound set: Until detected as full load Secondary (sub) tray 200 sheets (21 lb Bond) (with full-load detection function activated)

Warm-up time Approx. 20 minutes

Dimensions 53.5"(W) x 30.51"(D) x 48.15"(H); (1,360 (W) x 775 (D) x 1,223 (H) mm)


Power source AC120 V 60 Hz; NEMA: 5-20R; See ‘Power Source’ section for additional detailed image.

Power consumption 1,000 W max.


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

27



Finisher FS-612

Type Straight delivery, offset delivery, secondary (sub) tray delivery, Staple, Fold & Staple, Multi Half-Fold, Multi Tri-Fold, Punch (with Punch Kit PK-512 installed), using post inserter (with Post Inserter PI-502 installed)

Function Sort Output non-offset sets to the primary (main) tray. Offset Sort/Offset Group Offset each set upon exit to the primary (main) tray. Secondary (sub) tray Output non-offset sets to the secondary (sub) tray. Staple Output stapled sets to the primary (main) tray. Fold & Staple Output saddle-stitched and half-folded sets to the fold & staple mode tray. Half Fold Output half-folded paper to the fold & staple mode tray. Tri-Fold Output tri-folded paper to the fold & staple mode tray. Punch Output punched paper to the primary (main) tray or secondary (sub) tray. Post inserter Feed paper.

Stapling position 3 positions (1 staple at front/rear corner, 2 staples in center)

Available sizes in primary 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, (main) tray (Staple) A3L, B4L, SRA4L, A4L/P, B5L/P, A5P, Foolscap, 9" x 11"P,

Custom Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.47" (182 mm x 139 mm) Tab Paper (only with the tab side ahead in output direction)

Available sizes in primary 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, A3L, B4L, (main) tray (Fold & Staple) SRA4L, A4L, Custom

Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 8.27" x 10.98" (210 mm x 279 mm)

Available sizes in primary Half-Fold: 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L, A3L, (main) tray (Half Fold, B4L, SRA4L, A4L, Custom Tri-Fold) Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 8.27" x 10.98"

(210 mm x 279 mm) Tri-Fold: 8.5" x 11"L, A4L

Available sizes in primary 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, A3L, B4L, (main) tray (straight/ SRA4L, A4L/P, B5L/P, A5P, Foolscap, 9" x 11"P, Custom offset delivery) Max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.83"

(182 mm x 148 mm) Tab Paper (only with the tab side ahead in output direction) The following sizes are available only in straight delivery: 5.5" x 8.5"L/P, A5L/P, B6L Min. 5.04" x 5.47" (128 mm x 139 mm)

Available sizes 13" x 19.2"L, 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, in secondary (sub) tray 5.5" x 8.5"L/P, SRA3L, A3L, B4L, SRA4L/P, A4L/P, B5L/P,

A5L/P, B6L, A6L, Foolscap, 9 x 11P, Custom Max. 13" x 19.2" (331 mm x 488 mm) to min. 3.94" x 5.47" (100 mm x 139 mm) Tab Paper (only with the tab side ahead in output direction)


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

28



Finisher FS-612 continued

Available weight Staple, Fold & Staple, Half Fold, Tri-Fold: 17 to 28 lb Bond in primary (main) tray Straight delivery, offset delivery: 17 to 80 lb Bond

Available weight in secondary (sub) tray 17 to 93 lb Bond (50 g/m2 to 350 g/m2)

Dimensions 16.69"(W)* x 25.83"(D) x 38.98"(H), (424 (W)* x 656 (D) x 990 (H) mm) * Width including primary (main) tray: 26.56 inches/31.12 inches (with the edge pulled out)


Power source 24/5 VDC (supplied from Relay Unit RU-508) See ‘Power Source’ section for additional detailed image.

Post Inserter PI-502

Type Paper feeding equipment with separable torque limiter

Function Automatic Feed paper into the finisher on receiving a command from the main body. Manual Feed paper into the finisher on receiving a command manually sent from the control panel of the post inserter.

Paper sizes Upper tray 8.5" x 11"L/P, 5.5" x 8.5"P, A4L/P, B5L/P, A5P, Custom (max. 8.50" x 11.70" (216 mm x 297 mm) to min. 7.17" x 5.47" (182 mm x 139 mm)) Lower tray 12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P, 5.5" x 8.5"P, A3L, B4L, SRA4L, A4L/P, B5L/P, A5P, Foolscap, Custom (max. 12.36" x 18.03" (314 mm x 458 mm) to min. 7.17" x 5.47" (182 mm x 139 mm))

Paper type Plain, Fine, Color, Coated


Stack capacity 200 sheets (21 lb Bond) or within 30 mm thick for each of upper/lower tray

Dimensions 20.12"(W) x 24.41"(D) x 8.66"(H), (511 (W) x 620 (D) x 220 (H) mm)

Weight Approx. 23.1 lbs. (10.5 kg)

Power source 24/5 VDC (supplied from Relay Unit RU-508)

Power consumption 30 W or less


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

29



Multi Punch GP-501 (Die Set DS-501, DS-502, DS-503, DS-504, DS-505, and DS-506)

Speed Up to 80 sheets per minute

Punch Sheet Size 8.5" x 11"

Punch Edge 11

Paper Stock 20 lb. Bond to 80 lb. Cover, Letter/A4 and Letter/A4 Tab paper only.

Punch Capacity Single Sheet

Power Supply 115V, 60Hz, Single Phase; NEMA 5-20R

Electrical BTUs/Hour 1100BTU/HR; Watts 322W; Amps 2.8A

Safety TUV/GS, CE

Dimensions 12"(W) x 30.5"(D) x 40"(H); (305 (W) x 775 (D) x 1,020 (H) mm)


Shipping Weight Approx. 270 lbs. (123 kg)

Power source See ‘Power Source’ section for additional detailed image.

Relay Unit RU-506 (Required for GP-501 systems only)

Function Layering conveyance function: Layers two copied/printed sheets, then reverses and conveys them to the finishing options in simplex copying/printing. Reversing conveyance function: Reverses copied/printed sheets and conveys them to the finishing options in simplex copying/printing. Conveyance function: Provides straight delivery in duplex copying/printing.

Conveyance speed 80 sheets/min. (8.5" x 11"P/A4P)

Paper type Plain, Fine, Coat, Blank Insert, Book/News, Embossed •OHPtransparenciesandtracingpaperareunavailable.




Power source Supplied from Relay Unit RU-508; See ‘Power Source’ section for additional detailed image.


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501


IC-306

HD-514PH-101

PB-503

RU-508

HM-101

PF-705

HT-506

PF-704

HT-506

SD-506 FD-503 FS-612

PI-502

PK-512

RU-506 GP-501

30


IC-307 External Creo Image ControllerOperating System/Processor/Memory

Microsoft Windows XP Professional Edition Embedded/Intel i7-860 3.46 GHz, 8MB, Turbo Boost/5GB RAM (System: 2GB, Image: 3GB)

Hard Disk Drive/ DVD Drive

1.5TB (System and User: 500GB, Image: 1TB)/DVD R/W

Standard Hardware Keyboard, Mouse and 19" monitor Optional Hardware Creo Color Server product stand, X-Rite i1 Spectrophotometer, UK-103 USB Upgrade Kit

Software Support Adobe Acrobat® 9.0 Standard, Enfocus, PitStop Acrobat® Plug-in Lite Version 8

Networking Connectivity

Ethernet 1000BASE-T/100BASE-TX/ 10BASE-T, TCP/IP, IPv4/IPv6, NetBEUI, AppleShare (File Sharing), PAP (File Printing), NetBIOS, 802.1x Authentication,

Page Description Language

PS, EPS, PDF1.8 (CPSI 3017), TIFF, JPEG (excluding progressive JPEG and JPEG2000), IPDS (Transaction Power Kit only)

Hybrid Workflow PDF/X-1a, JDF1.3

Variable Data Handling

PPML 2.2, VPS (Creo Variable Print Specification 1.5)

Supported Print Standards

PDFL 9, ICC v4, Pantone GOE, FograCert, Adobe PDF Print Engine (APPE) 2, via a special software update

New Functions Destination Profiles to Spot Colors, Pantone GOE Library, Color Sets, Print Color Sets, Office Hot Folder Tool, Remote Site Manager, JDF 1.3 connectivity, Creo Color Server Job Ticket Software, Bi-directional Integration with Kodak Prinergy & Agfa Apogee, Easy VDP (Variable Data Printing) file Creator, Improved Perfect Binder Support Optional Power Kits Professional Power Kit, Process Power Kit, Imposition Power Kit, Transaction Power Kit

Power Supply 100-127VAC @ 50-60Hz, 2A @ 100-127VAC

Dimensions (WxHxD) 7.1" x 21.9" x 17.5"

IC-306 External Fiery Image ControllerOperating System/Processor/Memory

Windows XP Pro FES/Intel Core 2 Quad Q9400 2.66 GHz Processors/2GB RAM

Hard Disk Drive/ DVD Drive

160GB HDD/Internal DVD-RW Drive

Software Fiery System 9

Networking Connectivity

Simultaneous Auto switching Protocols, EtherTalk II, TCP/IP, Novell IPX iPrint, LDAP Support (Exchange, Novell, Domino, LDAPv3/RFC2251, Email address access and authentication User password validation), Certificate Management (SSL/TLS, X509 Standard), IP Sec Support, IPv6 Support

File Format Support Adobe Postscript® Level 1, 2, 3, Adobe PDF 1.5 to 1.7 (Acrobat® 6 to 9), PDF/X-1a, 3 and 4, Encapsulated PostScript (EPS), MS Office (DOC, XLS, PPT, PUB (via Hot Folders) Optional File Format Support JPEG, DCS 2.0, CT/LW, 1-bit TIFF, TIFF, TIFF/IT, PDF2Go SNMP Printing Support AppleTalk, Bonjour, SMB (peer-to-peer), LPD

Performance Features

Fiery Smart RIP, RIP-While-Print, RIP 1-While-Print 2, Fiery RIPChips™, EFI Video Interface Card, ECT Compression (for flexible compression ratios and visually lossless image quality)

Fiery Utilities Fiery Driver, Fiery Command WorkStation 5, Fiery WebTools™, Fiery Hot Folders, EFI Desktop SE Fiery Options Fiery SeeQuence Suite, Fiery SeeQuence Impose, Fiery SeeQuence Compose, Fiery Graphic Arts Package (Premium Edition), Fiery Graphic Arts Package, ES-1000 Spectrophotometer, Fiery Color Profiler Suite, Removable Hard Disk Drive, EFI Desktop Pro, Fiery Integrated Workstation: Fiery Stand, GUI Kit (19" display, keyboard, mouse), UK-102 USB Upgrade Kit Variable Data Handling Fiery FreeForm™, PPML v2.2 (PODi certified), Creo VPS Compatible, Optimized PostScript® and Optimized PDF

Power Supply 90-135VAC @ 47-63Hz, 6A @ 115VAC

Dimensions (WxHxD) 8.3" x 19.2" x 19"


31

IC-601 Konica Minolta Image Controller*System Version/Operating System

Konica Minolta 2.0/TimeSys Linux 6.1, NINJA 2.0

Processor/Memory/ Hard Disk Drive

Core 2 Duo 2.8GHz GHz Processor/4GB RAM/SATA: 500GB (250GB x 2), SSD: 2GB (Controller system stored)

Engine I/F Serial 768Kbps, C8000 Video Clock (Print): 76.068MHz

Power Supply 100 to 240V, 50/60Hz

Page Description Language/ PDF Support

Adobe Postscript® 3, CPSI 3019, TIFF, PCL5c/6*, XPS*/PDF v1.7, PDF/X-1a, PDF/X-3

Variable Data Handling

PPML2.1

Font Support Adobe Roman 136 fonts, PCL 81 fonts

OS Support (Software)

Windows 2000, Windows XP, Windows Vists, Windows 2003 Server: PS (PPD, Visual), Windows Server 2008 7: PS (PPD, Visual), XPS, Mac OS X 10.4-10.6: PDE (Visual)

Applications PageScope Direct Print, PageScope EMS Plug-in, PageScope Web Connection, PageScope Account Manager, PageScope NetCare Device Manager, Net Backup Tool, Font Management Utility, Print Status Notifier, Print Utility for UNIX, JobCentro (Job Control/Editing Utility), ColorCentro (Color Management Utility), Printgroove POD QUEUE

*Requires HD-514 and PH-101 for copying and scanning.

32

System Configuration/Power Source


LS + LS + FD + RU + EF + bizhub PRESS C8000 + PF-705FS + LS + RU + EF + bizhub PRESS C8000 + PF-705

LS + RU + EF + bizhub PRESS C8000 + PF-705 LS + LS + RU + EF + bizhub PRESS C8000 + PF-705

FS + LS + LS + RU + EF + bizhub PRESS C8000 + PF-705

FD + RU + EF + bizhub PRESS C8000 + PF-705 FS + FD + RU + EF + bizhub PRESS C8000 + PF-705

FS + RU + EF + bizhub PRESS C8000 + PF-705LS + FD + RU + EF + bizhub PRESS C8000 + PF-705

33



SD + RU + EF + bizhub PRESS C8000 + PF-705

SD + FD + RU + EF + bizhub PRESS C8000 + PF-705

SD + LS + RU + EF + bizhub PRESS C8000 + PF-705

FS + SD + RU + EF + bizhub PRESS C8000 + PF-705

FS + SD + FD + RU + EF + bizhub PRESS C8000 + PF-705

PB + RU + EF + bizhub PRESS C8000 + PF-705

SD + LS + FD + RU + EF + bizhub PRESS C8000 + PF-705

SD + LS + LS + RU + EF + bizhub PRESS C8000 + PF-705

34

System Configuration/Power Source continued


PB + LS + RU + EF + bizhub PRESS C8000 + PF-705

PB + FD + RU + EF + bizhub PRESS C8000 + PF-705

PB + LS + FD + RU + EF + bizhub PRESS C8000 + PF-705

PB + SD + FD + RU + EF + bizhub PRESS C8000 + PF-705

PB + LS + LS + RU + EF + bizhub PRESS C8000 + PF-705

FS + LS + FD + RU + EF + bizhub PRESS C8000 + PF-705

PB + SD + LS + RU + EF + bizhub PRESS C8000 + PF-705

PB + SD + RU + EF + bizhub PRESS C8000 + PF-705

35



FS + PB + RU + EF + bizhub PRESS C8000 + PF-705

FS + PB + FD + RU + EF + bizhub PRESS C8000 + PF-705

FS + SD + FD + RU + EF + bizhub PRESS C8000 + PF-705 FS + PB + SD + RU + EF + bizhub PRESS C8000 + PF-705

FS + PB + LS + RU + EF + bizhub PRESS C8000 + PF-705

FS-612 + RU + EF + bizhub PRESS C8000 + PF-705

36

System Configuration/Power Source continued


FS + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

FS + FD + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

FS + LS + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

FS + SD + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

FS + PB + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

PB + LS + RU-506 + GP-501 + RU-508 + EF + bizhub PRESS C8000 + PF-705

37


How to Build a bizhub PRESS C8000 Full Color Printer/Copier/Scanner (from start to finish)

FD-503

LS-505(+ LC-501)

SD-506

PB-503

FS-521

FD-503SD-506

FD-503PB-503

FD-503FS-521

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

bizhub PRESSC8000

EF-101RU-508

HT-506HT-506

HT-506

HD-514PH-101

HM-101

HT-506HT-506

HT-506

IC-601**IC-307*IC-306

1

How to Build a System for the bizhub PRESS C8000 Full Color Printer/Copier/Scanner (from start to finish)

05/2011

FD-503

LS-505(+ LC-501)

SD-506

PB-503

FS-521

FD-503SD-506

FD-503PB-503

FD-503FS-521

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

bizhub PRESSC8000

EF-101RU-508

HT-506HT-506

HT-506

HD-514PH-101

HM-101

HT-506HT-506

HT-506

IC-601IC-307IC-306

Chose one of the Finishing Configurations Below

Chose one of the Image Controllers above

Chose one of the Paper Feed Configurations Below

38


How to Build a bizhub PRESS C8000 Full Color Printer/Copier/Scanner (from start to finish) continued

2


05/2011

HT-506HT-506

HT-506

FD-503

FD-503LS-505(+ LC-501)

FD-503LS-505(+ LC-501)

SD-506

LS-505(+ LC-501)

PB-503

FD-503LS-505(+ LC-501)

FS-521

FD-503SD-506PB-503

FD-503SD-506FS-521

FD-503

FD-503

SD-506FS-521

PB-503FS-521

PB-503

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

RU-508

HT-506

HD-514PH-101

HM-101

HT-506HT-506

EF-101 bizhub PRESSC8000

IC-601IC-307IC-306




39



3


FD-503LS-505(+ LC-501)

LS-505(+ LC-501)

LS-505(+ LC-501)

SD-506

LS-505(+ LC-501)

PB-503

LS-505(+ LC-501)

FS-521

LS-505(+ LC-501)

SD-506PB-503

LS-505(+ LC-501)

SD-506FS-521

LS-505(+ LC-501)

PB-503

LS-505(+ LC-501)

LS-505

FS-521

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

EF-101RU-508

HT-506

HD-514PH-101

HM-101

HT-506HT-506

HT-506

HT-506

HT-506

bizhub PRESSC8000

IC-601IC-307IC-306




05/2011

40



4

05/2011



LS-505(+ LC-501)

LS-505(+ LC-501)

LS-505(+ LC-501)

LS-505(+ LC-501)

LS-505(+ LC-501)

LS-505(+ LC-501)

SD-506

PB-503

FS-521

SD-506

SD-506

FS-521

PB-503

SD-506PB-503FS-521

PB-503FS-521

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

RU-508

HT-506

HD-514PH-101

HM-101

HT-506HT-506

HT-506HT-506

HT-506


IC-601IC-307IC-306



41



5

05/2011


PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

FS-612

PI-502

PK-512

EF-101RU-508

HT-506HT-506

HT-506

HT-506

HD-514PH-101

HM-101

HT-506

HT-506

bizhub PRESSC8000

IC-601IC-307IC-306




42



6

FS-521

FD-503FS-521

LS-505(+ LC-501)

PB-503

LS-505(+ LC-501)

FS-521

SD-506FS-521

PB-503FS-521

PF-705

PF-705

PF-704

PF-704

PF-704

PF-704

GP-501

RU-508RU-506

HT-506HT-506

HT-506

HT-506

HD-514PH-101

HM-101

HT-506

HT-506


IC-601IC-307IC-306

05/2011






43

Accessory Options for bizhub PRESS C8000 Full Color Printer/Copier/Scanner


05/2011

Accessory Item Number DescrIptIoN Notes

Base Unit

bizhub PRESS C8000

A1RF011 Printer/Copier/Scanner Includes: (4) Drum, (4) Developer, Tray 1/2/3: 500 sheets each. 1,500 sheets max. 80 ppm color and B/W

PaPeR sUPPLY OPtiOns

PF-704 A1RGWY1 Paper Feed Unit 4,630 sheet capacity.

PF-705 A1RHWY1 Paper Feed Unit 4,630 sheet capacity with ADF. Requires HD-514 and PH-101.

OUtPUt OPtiOns

FS-521 A0GYWY1 100-Sheet Stapling Finisher Staples are custom cut for clean output regardless of set size.

FS-612 A1TVWY1 Booklet Finisher Up to 20-sheets (80 pages).

SD-506 A0H2WY1 Saddle Stitch Finisher Up to 50-sheets (200-pages) with face trim.

LS-505 A0H1W11 Large Capacity Stacker 5000-sheet capacity, includes roll-away cart.

LC-501 A1AYWY1 Extra Rollaway Cart for LS-505

RU-508 A1TTW11 Relay Unit Required on PRO configurations.

RU-506 A0GEWY1 Relay Unit for GP-501 Required with GP-501 GBC Inline Punch.

EF-101 A1RTW11 Second Fusing Unit Required on all C8000 bizhub PRESS units.

HD-514 A1RMWY1 Hard Disk Drive Required when choosing PF-705 for copying and scanning.

PH-101 A21CWY1 Preview Kit Required with PF-705 for copying and scanning.

HM-101 A1TUWY1 Paper Humidification Decurling Kit for RU-508

Decurls lightweight stock.

HT-506 A1RKWY1 Heater Conditioner for Paper Feed Units Conditions moist paper.

FD-503 A0H0W11 Multi Folder/Punch/Post Inserter 6 different folds and post insertions.

PB-503 A15XW11 Perfect Binder Up to 600-page perfect bound books.

PI-502 A04HWY1 Post Inserter for FS-612

PK-512 A04F0Y1 2/3-hole Punch Kit for FS-612

GP-501 A0N9W11 GBC Multi Punch 6 different inline GBC punching available.

DS-501 A0NAW11 3-hole Punch Die Optional die for GP-501.

DS-502 A0NCW11 19-hole Cerlox Punch Die Optional die for GP-501.

DS-503 A0NDW11 32-hole Wirebind Punch Die Optional die for GP-501.

DS-504 A0NEW11 21-hole Wirebind Punch Die Optional die for GP-501.

DS-505 A0NFW11 44-hole Color Coil Punch Die Optional die for GP-501.

DS-506 A0NGW11 11-hole Velobind Punch Die Optional die for GP-501.

COntROLLeR OPtiOns

IC-306 A21DWY1 External Fiery Image Controller External Fiery PRO Intel Core 2 Quad Q9400, 2.66 GHz RoHS, 2 GB Memory, 160 GB SATA HDD, Fiery System 9.

IC-307 A3E7WY1 External Creo Image Controller External Creo Core 2 Quad A9400 2.66 GHz, 2 GB memory, 250 GB x 3 HDD.

IC-601 A2130Y1 Embedded Konica Minolta Image Controller

Embedded Konica Minolta Core 2 Duo 2.8 GHz, 4 GB memory, 250 GB x 2 HDD. Requires HD-514 and PH-101.

UK-102 A37YWY1 USB Upgrade Dongle UK-102 required for IC-306.

UK-103 A3E8WY1 USB Upgrade Dongle UK-103 required for IC-307.

44



8

COnsUMaBLes*Accessory Item Number DescrIptIoN yIelD

TN615K A1DY130 Black Toner 91,000 @ 5% coverage

TN615Y A1DY230 Yellow Toner 60,000 @ 5% coverage

TN615M A1DY330 Magenta Toner 68,000 @ 5% coverage

TN615C A1DY430 Cyan Toner 75,000 @ 5% coverage

DV613K A1DY600 Black Developer 300,000

DV613Y A1DY700 Yellow Developer 300,000

DV613M A1DY800 Magenta Developer 300,000

DV613C A1DY900 Cyan Developer 300,000

DU-103 A22COY1 Drum Unit 300,000

Staples (for FS-521)

14YJ Staples for FS-521 5000 x 5

Staples (for FS-612)

4448121 Staples for FS-612 5000 x 3

Staples (for SD-506)

14YH Staples for SD-506 5000 x 3

GC-501 A0800Y0 PB-503 Glue Chips 300 Books*

* Yield based on 100 letter-sized sheets.

05/2011


bizhub press c8000 specification & installation … minolta bizhub press c8000 specification...

Documents