by franklin electric monodrive & xt constant pressure controller

By Franklin ElectricBy Franklin Electric

MonoDrive & XTMonoDrive & XT

Constant Pressure ControllerConstant Pressure Controller

The CP Water – MonoDrive is the newest technological The CP Water – MonoDrive is the newest technological

innovation in the constant pressure market.innovation in the constant pressure market.

The MonoDrive provides the flexibility to convert a single The MonoDrive provides the flexibility to convert a single phase conventional 3-wire pump system to a constant phase conventional 3-wire pump system to a constant pressure system with a simple replacement of a 230 volt pressure system with a simple replacement of a 230 volt control box.control box.

MonoDrive MonoDrive Constant Pressure Controller Constant Pressure Controller

For Single Phase PumpsFor Single Phase Pumps

Application DataApplication Data

MonoDriveMonoDrive

The CP Water – MonoDrive is designed for use in The CP Water – MonoDrive is designed for use in applications with a Franklin Electric 1/2, 3/4 or 1 Hp, applications with a Franklin Electric 1/2, 3/4 or 1 Hp, single phase, 3-wire pump – 230 volt single phase, 3-wire pump – 230 volt

MonoDrive XT 1½ and 2 HpMonoDrive XT 1½ and 2 Hp

It is ideal for applications that have a wide range of flow It is ideal for applications that have a wide range of flow demand with performance ranges of 1/2, to 2 Hp and demand with performance ranges of 1/2, to 2 Hp and want constant “city like” water pressure.want constant “city like” water pressure.



SpecificationsSpecifications

MonoDriveMonoDrive

Input (from power source)Input (from power source)● Allowable input voltage of conventional 230V motors?Allowable input voltage of conventional 230V motors?● 10% +/- 10% +/- 207V minimum - 253V maximum207V minimum - 253V maximum

MonoDrive allowable voltage MonoDrive allowable voltage 190V min – 260V max 1-phase190V min – 260V max 1-phase

● FrequencyFrequency 60/50 Hz60/50 Hz● Amps (RMS) Amps (RMS) 5.7A (1/2Hp), 8.7A (3/4Hp), 11A (1Hp)5.7A (1/2Hp), 8.7A (3/4Hp), 11A (1Hp)

Output (To Motor) – MonoDrive & XTOutput (To Motor) – MonoDrive & XT VoltageVoltage VariableVariable FrequencyFrequency Variable (30-60 Hz)Variable (30-60 Hz) Amps (RMS) Amps (RMS) 4.0A (1/2Hp), 6.6A (3/4Hp), 9.0A (1Hp)4.0A (1/2Hp), 6.6A (3/4Hp), 9.0A (1Hp)




Features & BenefitsFeatures & Benefits

MonoDriveMonoDrive

½ HP to 2 HP performance + Constant pressure with a ½ HP to 2 HP performance + Constant pressure with a wide range of settings (25 to 80 psi).wide range of settings (25 to 80 psi).

Easy installation – remove the 3-wire control box, install Easy installation – remove the 3-wire control box, install the Drive Assembly and pressure switch, adjust tank the Drive Assembly and pressure switch, adjust tank pressure – 70% of operating pressure. pressure – 70% of operating pressure.

Selectable HP rating via DIP switches.Selectable HP rating via DIP switches.


Works with a standard single phase 4” Franklin motor.Works with a standard single phase 4” Franklin motor. Any pump brandAny pump brand No need to pull the pump (3-wire – 230 volt)No need to pull the pump (3-wire – 230 volt)

Works with a small pressure tank or larger tanks already in Works with a small pressure tank or larger tanks already in place.place. Minimum tank volume: 2 gallons.Minimum tank volume: 2 gallons. No need to pull the pump.No need to pull the pump.


Excellent radio frequency interference shielding. Excellent radio frequency interference shielding.

Soft start means less motor stress and longer motor life.Soft start means less motor stress and longer motor life.


Built-in protection and diagnostics.Built-in protection and diagnostics. Surge protectionSurge protection Under loadUnder load Under voltageUnder voltage Locked pumpLocked pump Open CircuitOpen Circuit Short CircuitShort Circuit Overheated ControllerOverheated Controller


Smart Reset technology allows well recovery before Smart Reset technology allows well recovery before restarting the pump.restarting the pump.

UL recognized for U.S.A. and Canada.UL recognized for U.S.A. and Canada.


Factory default setting Monodrive 3/4 Hp pump and motor.Factory default setting Monodrive 3/4 Hp pump and motor.

XT 1 ½ Hp pump and motor.XT 1 ½ Hp pump and motor.

An excellent upgrade option for customers replacing a An excellent upgrade option for customers replacing a pressure tank, offer a MonoDrive and smaller tank as pressure tank, offer a MonoDrive and smaller tank as option.option.

Installation is as simple as a 3-wire control boxInstallation is as simple as a 3-wire control box

You can provide your customers all the advantages of an You can provide your customers all the advantages of an electronic constant pressure water system without pulling electronic constant pressure water system without pulling the pump!the pump!

Standard SystemStandard System

MonoDrive SystemMonoDrive System

$1,955.96$1,955.96

$2,192.06$2,192.06

by franklin electric monodrive & xt constant pressure controller

Documents