buszrem katalog eng
DESCRIPTION
ÂTRANSCRIPT
PRODUCTCATALOGUE
COBBLE BLOCKS TERRACE TILES
ICONS They will inform you in an easy and understandableway about the properties of our products.
Distinction – with this icon we mark the productswhich have exceptional appearance and qualities due to special production process, for instance,following the process of ageing, bead blasting etc.
Low water absorption means that the productsare so impenetrable and uniform that their absorbabilityratio is below 6 %.
Resistance to frost and low temperatures – our productsare resistant to low temperatures that are characteristicfor our climate zone.
Dimensional stability – means that the products conformto their dimensions, which allows fast and easy completionof paving projects.
The product is intended for pedestrian routes – this markingmeans they are ideally suited for pedestrian routes, however,because of their thickness and technical parametersthey should not be used where heavy traffic and high loadvehicles are expected.
The product designed for high loads – this symbol describesthe group of products which have elevated resistanceto high loads. It is recommended for paving streets,parking lots and squares where heavy vehicles drive.
High compression strength – our products are resistantto high unit pressures, they do not deform and maintaintheir original properties.
5-year guarantee– our products are covered by a 5-yearmanufacturer’s guarantee.
3-year guarantee– our products are covered by a 3-yearmanufacturer’s guarantee.
This symbol means that the cobble blocks are manufacturedin the Clean Surface System.
DEAR CUSTOMERS
In our catalogue there may be inconsistenciesin terms of colours of the presented productsin comparison with the originals. It is contingenton the technology of photography and printingand therefore we recommend that you visit our sales outlet.In our exhibition gardens presenters will show youthe original selection of colours and surfacestructures of our products.
CLEAN SURFACESYSTEM
The Clean Surface System is a modern technologywhich seals the blocks from inside already duringthe production stage. The surface is then much moreresistant to staining, dirt and growth of lichens.Due to this it is easier to keep it clean for manyyears to come.
Advantages of CSS:- increases resistance to penetration by liquids- makes cleaning easier- limits growth of moss and lichens- increases resistance to scratching
REFINED BLOCKS
OLD COBBLE BLOCKS
ECO PRODUCTS
INDUSTRIAL PRODUCTS
INDUSTRIAL PRODUCTS
SANTORINI WASHED/BLENDS
KRETA WASHED KRETA WASHED CHOCOLATE BLOCKS
MALTA WASHED
KRETA SMOOTH COFFEE INSPIRATIONS
KRETA SMOOTH COLOURS OF AUTUMN
MALTA SMOOTH COFFEE INSPIRATIONS
KRETA AGED COFFEE INSPIRATIONS
KRETA AGED COLOURS OF AUTUMN
MALTA AGED COFFEE INSPIRATIONS
ROMA AGED
BORDIR MILANO
10
162428
344044
50545862
70
RUSTICALPIAZZANOSTALITPALISADE PIAZZAPALISADE LUNAR
7682889092
EKOSTRADAOPEN-WORK TILESMEBA TILESPLANTERS VERDUROPOTS GRANDE AND PICCOLO
9496979899
HOLLANDBEHATONUNI-STONEUNI-DEKORCONCRETE BLOCKKERBSDITCH PROFILES
102103104105106107108
TRIANGLE DITCH LINERSEKO-BORD SLAT
111112
DECORATIVE TILES
ROCK BEAD BLASTED AUTUMN INSPIRATIONS
ROCK BEAD BLASTED ALONG THE WAY WITH DISTINCTION
ROCK BEAD BLASTEDROCK BEAD BLASTED SANDSTONE STRUCTURE
ROCK BEAD BLASTED SLATE STRUCTURE
BORDER ROCK
BLUES CURLING AUTUMN INSPIRATIONS
BLUES CURLING ALONG THE WAY WITH DISTINCTION
BLUES CURLING SLATE STRUCTURE
BLUES CURLING SANDSTONE STRUCTURE
ETNOSANDSTONEPOP SMOOTHPOP BEAD BLASTED
116120
122124128
130
132 134
136138
140142144146
DECORATIVE SYSTEM
SMALL ARCHITECTURE
TECHNICAL DATA
PINOSANDSTONE WET CAST
CORNER SYSTEM
TIPS AND GUIDANCEIMPREGNATESADDRESSES
148152
154
156158161
NEW
NEW
NEW
DESIGN SERVICE
Design for free!!!When choosing our products you may also useour professional design service. Our architects will visit youand on the basis of individual conversation and their ownobservations they will develop a design for the pavementthat will match the character of your property. The conceptwill then be sent to you via e-mail to make any changesso that ultimately the customer receives a “customizedproject”.
CALL THE ARCHITECTMOBILE: 600 301 380MOBILE: 600 301 382
AFTERBEFORE
AFTERBEFORE
54
COOPERATIONWITH DESIGNERS
- Crosshatching of flat and repetitive materials,- Blocks in CAD 2d for all product ranges,- Blocks 3d in SketchUp for all product ranges,- Jpeg textures for flat and repetitive materials,- Textures overlaid on surfaces in SketchUp and scaled,- Patterns of blocks arrangement in 2d,- Patterns of blocks arrangement in 3d.
Materials to download for architects and designers are on our website: www.buszrem.pl
VISUALIZATION AND WORKING VERSIONS OF THE DESIGNUsing SketchUp software
76
DISTINCTIONPRODUCTS
1. SANTORINI WASHED2. KRETA WASHED3. MALTA WASHED4. KRETA SMOOTH Coffee inspirations5. KRETA SMOOTH Colours of autumn6. MALTA SMOOTH Coffee inspirations7. KRETA AGED Coffee inspirations8. KRETA AGED Colours of autumn9. MALTA AGED Coffee inspirations10. ROMA AGED11. BORDIR MILANO
21 3
7 8
4 5
9 10
6
11
SantoriniW A S H E D B L O C K S
DISTINCTION PRODUCTS
Santorini is a product of the highest quality. This is a cobble block for customerswith the most refined aesthetic taste. It combines simplicity of the modern formwith a surface that looks like a rock fracture. At the same time it finds applicationboth in the modern and traditional architecture.
The washed Santorini "Rock Charm” is offered in two colours – light and dark granite.Such composition of colours gives a property an exclusive character whichis astonishing with its toned-down elegance.
Washed Santorini „Chocolate Blocks” combines three colours of chocolate – white,milky and bitter. Such composition of colours gives a property an exclusive, gentlecharacter. The aggregate used in the upper decorative layer is specially selectedand introduced from Italian Dolomites.
Santorini "Colours of Earth ", combines four colours - concha, sand, rubyand volcanic. When you select the first three colours, it will give your propertya warm and gentle character. The volcanic colour creates toned graphite-greycolours which can be in an interesting way combined with light elevationof modern architecture.
NEW
S1, S2, S3, S4, S5, S6, S7 packed together on the pallet, (S1, S2, S3 – 3 pcs./layer;S4, S5, S6, S7 – 2 pcs./layer)
COLOURS
1 Chocolate blocks: white2 Chocolate blocks: milky3 Chocolate blocks: bitter4 Rock charm: light granite5 Rock charm: dark granite 6 Colours of Earth: concha7 Colours of Earth: volcanic8 Colours of Earth: sand9 Colours of Earth: ruby
TECHNICAL DATA
1110
1 2
3 4
5 6
7 8
9
35
45
Blocktype
thicknessin cm
lengthin cm
widthin cm
Qty. of m2/pallet
approximatepallet
weight in kg
DISTINCTION PRODUCTS
SANTORINI WASHEDChocolate blocks: white
SANTORINI WASHEDChocolate blocks: milky
SANTORINI WASHEDChocolate blocks: bitter
SantoriniW A S H E D B L O C K S
SANTORINI WASHEDRock charm: light granite
SANTORINI WASHEDRock charm: dark granite
SantoriniW A S H E D B L O C K S
DISTINCTION PRODUCTS
1312
Santorini
DISTINCTION PRODUCTS
B L E N D S
SANTORINI BLENDSColours of Earth: concha
SANTORINI BLENDSColours of Earth: volcanic
SANTORINI BLENDSColours of Earth: sand
SANTORINI BLENDSColours of Earth: ruby
1514
DISTINCTION PRODUCTS
Washed Kreta blocks are a hit in the collection of distinction blocks. A specialtechnological process is used to reveal the distinction aggregate used in the upperlayer, due to which we obtain an extremely elegant surface. The laid pavementis similar to basalt although it is smooth and anti-slip.Washed Kreta is popular among persons of exquisite taste. It proves itself bothfor impressive mansions and elegant one-family houses. Five blocks of varioussizes assure freedom of composition and allow creating interesting and uniquepatterns. In order to diversify the composition of the pavement it is worthcombining the washed Kreta with washed Malta of bigger size and regular shape.The width of two Kreta blocks is equivalent to one width of Malta block.
W A S H E D B L O C K S
COLOURS
1 light grey2 graphite3 yellow4 brown
TECHNICAL DATA
1716
1 2
3 4
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
K1 K2 K3 K4 K5
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
KRETA WASHEDlight grey
KRETA WASHEDgraphite
W A S H E D B L O C K S
1918
KRETA WASHEDyellow
KRETA WASHEDbrown
W A S H E D B L O C K S
DISTINCTION PRODUCTS
2120
W A S H E D B L O C K S
DISTINCTION PRODUCTS
2322
DISTINCTION PRODUCTS
Kreta "Chocolate blocks " is new in the collection of distinction cobble blocks.The beautiful, washed surface of the block with a fine-grained structure is similarin appearance to natural stone. The system of five blocks making up the Kretapattern will assure the freedom of composition and allow creating interestingand unique pavement compositions.
Here we present three chocolate colours: white, milky and bitter. Such combinationof colours will give your property an exclusive, but also gentle character.The aggregate used in upper decorative layer was specially selected and introducedfrom Italian Dolomites.
NEWW A S H E D B L O C K S
1 Chocolate blocks: white2 Chocolate blocks: milky3 Chocolate blocks: bitter
2524
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
K1 K2 K3 K4 K5
1
2
3
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
COLOURS
TECHNICAL DATA
DISTINCTION PRODUCTS
KRETA WASHEDChocolate blocks: white
KRETA WASHEDChocolate blocks: milky
KRETA WASHEDChocolate blocks: bitter
W A S H E D B L O C K S
2726
Malta – is for those who like straight lines and geometric shapes. The pavementslaid from Malta are usually regular and toned down. However, it is easy to changea pavement’s character by combining Malta with small Kreta blocks. In this way,using other shapes or colours, it is possible to highlight the finishing of pathsor the lines along which we stroll most often. Next to the basic colours,the anthracite blend is also an attractive combination of greyness of graniteand blackness of basalt which attracts the attention of even the most demandingcustomers. The system of six chamferless blocks should be laid alternatively usingblocks from three different pallets.
DISTINCTION PRODUCTS
W A S H E D B L O C K S
COLOURS
1 light grey2 graphite3 yellow4 anthracite blend
TECHNICAL DATA
2928
1 2
3 4
All block formats are packed on one pallet; in one layer there are 4 pieces of every type.
M1 M2 M3 M4 M5 M6
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
W A S H E D B L O C K S
MALTA WASHED BLOCKSlight gray, yellow
MALTA WASHED BLOCKSgraphite, anthracite blend
3130
W A S H E D B L O C K S
DISTINCTION PRODUCTS
3332
This series includes Kreta Caramel – a block of light, pastel colours for thosewho like when colours softly and delicately combine and pervade each other.Kreta Latte – is a block of a darker colour of coffee and milk whose slightlysmoky colour perfectly melts into the autumn landscape of the environment.Kreta Mocca – is dark and intriguing like strong coffee. The blocks of this colourwill satisfy those who like firm colours and contrasts. It harmonizes wellwith a landscape, producing a fascinating effect. All colours are matchingand complement each other.Interesting effects can be obtained by combining Kreta and Malta of the samecolours. Additionally, we can build dimensional elements from borders Milanoor Rome, aged and in the shapes R2 and R3.
DISTINCTION PRODUCTS
S M O O T H B L O C K S
COLOURS
TECHNICAL DATA
3534
1
2
3
K1 K2 K3 K4 K5
1 Coffee inspirations: caramel2 Coffee inspirations: latte3 Coffee inspirations: mocca
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
KRETA SMOOTHCoffee inspirations: caramel
KRETA SMOOTHCoffee inspirations: latte
KRETA SMOOTHCoffee inspirations: mocca
S M O O T H B L O C K S
3736
DISTINCTION PRODUCTS
S M O O T H B L O C K S
3938
It is an ideal choice for those who like autumn scenery charming with warm lighton pigmented leaves. Such climate you can bring to your garden due to speciallyselected colours combined in two types of blocks: light and dark blends. Such coloursand the shape of the block itself add warmth and charm to garden compositions.
DISTINCTION PRODUCTS
S M O O T H B L O C K S
4140
1
2
K1 K2 K3 K4 K5
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
1 Colours of autumn: light blend2 Colours of autumn: dark blend
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
KRETA SMOOTHColours of autumn: light blend
KRETA SMOOTHColours of autumn: dark blend
S M O O T H B L O C K S
4342
Just like Kreta, it emanates a warmth of colours: Caramel, Latte and Mocca.Every one of them has a different character which is inspired by sweet caramel,coffee and milk and strong mocca coffee. The system of six chamferless blocks,due to their shapes, will prove better on larger surfaces. Interesting effects can beobtained by combining Malta and Kreta of the same colours. Additionally, we canbuild dimensional elements from Milano or Rome borders, aged and in shapesR2 and R3.
DISTINCTION PRODUCTS
S M O O T H B L O C K S
4544
All block formats are packed on one pallet; in one layer there are 4 pieces of every type.
M1 M2 M3 M4 M5 M6
1 Coffee inspirations: caramel2 Coffee inspirations: latte3 Coffee inspirations: mocca
1
2
3
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
MALTA SMOOTH Coffee inspirations: caramel
MALTA SMOOTH Coffee inspirations: latte
MALTA SMOOTH Coffee inspirations: mocca
DISTINCTION PRODUCTS
S M O O T H B L O C K S
4746
DISTINCTION PRODUCTS
S M O O T H B L O C K S
4948
Just as smooth Kreta, it charms with ideally harmonizing colours which introducethe climate of peace, relax and positive energy. When subject to the process of ageingthey gain a little rustic character and in this way they better melt in with the surroundinglandscape. Original compositions can be obtained by combining the aged Kretawith Malta. For building the three-dimensional elements it is worth using the agedborders Milano and Rome R2 and R3. All products are of the colours of „Coffee inspirations”which is great for obtaining consistency of an area under development.
DISTINCTION PRODUCTS
A G E D B L O C K S
5150
1
2
3
K1 K2 K3 K4 K5
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
1 Coffee inspirations: caramel2 Coffee inspirations: latte3 Coffee inspirations: mocca
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
KRETA AGED BLOCKSCoffee inspirations: caramel
KRETA AGED BLOCKSCoffee inspirations: latte
KRETA AGED BLOCKSCoffee inspirations: mocca
A G E D B L O C K S
5352
It is an ideal choice for those who like autumn scenery charming with warm lighton pigmented leaves. Such a climate you can introduce to your garden due to speciallyselected colours combined in two types of blocks: light and dark blends. Such coloursand the shape of the block itself add warmth and charm to garden compositionsand integrates the pavement into the surrounding landscape.
DISTINCTION PRODUCTS
A G E D B L O C K S
5554
1
2
K1 K2 K3 K4 K5
K1, K2, K3, K4, K5 – packed together on the pallet. (K1- 22 pcs./layer; K2 - 29 pcs./layer;K3 - 24 pcs./layer; K4 - 21 pcs./layer; K5 - 22 pcs./layer;)
1 Colours of autumn: light blend2 Colours of autumn: dark blend
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
KRETA AGED BLOCKSColours of autumn: light blend
KRETA AGED BLOCKSColours of autumn: dark blend
A G E D B L O C K S
5756
Just like Kreta, it emanates warmth of colours: Caramel, Latte and Mocca. Each of themhas a different character which is inspired by sweet caramel, coffee and milk and strongmocca coffee. The system of six blocks was additionally subject to an ageing processdue to which it better integrates into the surrounding landscape. Interesting effectscan be obtained by combining Malta and Kreta of the same colours. Additionallywe can build three-dimensional elements from Milano or aged Rome borders in shapesR2 and R3.
DISTINCTION PRODUCTS
A G E D B L O C K S
5958
All block formats are packed on one pallet; in one layer there are 4 pieces of every type.
M1 M2 M3 M4 M5 M6
1 Coffee inspirations: caramel2 Coffee inspirations: latte3 Coffee inspirations: mocca
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
1
2
3
MALTA AGED BLOCKSCoffee inspirations: caramel
MALTA AGED BLOCKSCoffee inspirations: latte
MALTA AGED BLOCKSCoffee inspirations: mocca
DISTINCTION PRODUCTS
A G E D B L O C K S
6160
Roma, just as the ancient city, has spirit. Subject to an ageing process it acquiresa specific character and by that it makes up a material that creates an excellentsetting for both classic and rustic architecture. Not infrequently, the architects,just for contrast, use this type of pavement in modern structures.An invaluable quality of Roma blocks is that they are “dyed in the cake” and,following this, they look equally good from all sides. This allows layingthe pavement and erecting spatial elements from it such as, for instance, low walls,stairs and fences, which contributes to the uniformity of the composition.The colours Caramel, Latte and Mocca in shapes R2 and R3 are especially dedicatedas supplementation of the Kreta and Malta block lines in ”Coffee inspirations”.Other colours are available in all dimensions, both in rectangular (R1, R2, R3)and trapezoidal shapes (R4, R5) due to which both geometrical and irregularpatterns can be made from them.
DISTINCTION PRODUCTS
A G E D B L O C K S
6362
R1 R2 R3 R4 R5
1 2
3 4
5 6
7
1 brown2 olive3 red4 graphite5 caramel6 latte7 mocca
The blocks R1, R2, R3, R4, R5 are available in colours: brown, olive, red, graphite; the blocksR2, R3 are available in colours of co�ee inspirations: caramel, mocca, latte.
R1, R2, R3 – packed separately on pallets. R4, R5 – packed together on the pallet. The chamferlessblock is not available in current sale – production on special order.
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
DISTINCTION PRODUCTS
ROMA AGED BLOCKSCoffee inspirations: caramel
ROMA AGED BLOCKSCoffee inspirations: latte
ROMA AGED BLOCKSCoffee inspirations: mocca
A G E D B L O C K S
ROMA AGED BLOCKSbrown
ROMA AGED BLOCKSolive
ROMA AGED BLOCKSred
ROMA AGED BLOCKSgraphite
6564
DISTINCTION PRODUCTS
A G E D B L O C K S
6766
DISTINCTION PRODUCTS
A G E D B L O C K S
6968
The border is primarily designed for building steps or as an element separatingthe decorative greenery from the pavement or lawn. Depending on the methodof laying, we can obtain two heights with either chamfered or rounded step edge.It is offered in aged and smooth versions and makes up a system which is consistentwith Kreta, Malta and Roma R2 and R3 in ”Coffee inspirations”.
DISTINCTION PRODUCTS
7170
1
2
3
1 Coffee inspirations: caramel (smooth and aged)2 Coffee inspirations: latte (smooth and aged)3 Coffee inspirations: mocca (smooth and aged)
On demand the following colours: grey, graphite, red in smooth and aged versionsare available.
COLOURS
TECHNICAL DATA
height in cm
lengthin cm
widthin cm pcs./m2 pcs./pallet
approximatepallet
weight in kg
DISTINCTION PRODUCTS
MILANO SMOOTHCoffee inspirations: mocca
MILANO SMOOTHCoffee inspirations: latte
MILANO SMOOTHCoffee inspirations: caramel
MILANO AGEDCoffee inspirations: mocca
MILANO AGEDCoffee inspirations: latte
MILANO AGEDCoffee inspirations: caramel
7372
OLD COBBLE BLOCKS
1. RUSTICAL2. PIAZZA3. NOSTALIT4. PALISADE PIAZZA5. PALISADE LUNAR
1
2
3
4
5
OLD COBBLE BLOCKS
Rustic blocks are ideal for paving yards, gardens and parks in a rustic style.Both the form and colours resemble cobbled lanes of old towns. Their additionalqualities are: irregular structure of edges and surface and variable colours whichincreases the natural effect.
7776
1 2
3 4
5 6
7 8
1 grey2 graphite3 red4 brown5 olive6 yellow7 light blend8 dark blend
A, B, C, D, E, - packed together on the pallet (A- 6 pcs./layer; B - 5 pcs./layer;C - 11 pcs./layer; D - 13 pcs./layer; E - 2 pcs./layer).
A B C D E
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
OLD COBBLE BLOCKS
RUSTICALgrey
RUSTICALgraphite
RUSTICALred
RUSTICALbrown
RUSTICALolive
RUSTICALyellow
RUSTICALlight blend
RUSTICALdark blend
7978
OLD COBBLE BLOCKS
8180
This block is ideal for paving yards, gardens and parks in old-town style.Its characteristic and toned-down colours resemble pavements in old Italiantowns and streets. Five different and specially-selected blocks assure freedomof composition and the shape of each block allows creating even the mostfanciful segments around wells, posts and trees.
OLD COBBLE BLOCKS
8382
1 2
3 4
5 6
7 8
P1 P2 P3 P4 P5
P1 packed separately on the pallets; P2, P3 – packed together on the pallet (P2 - 24 pcs./layer;P3 - 24 pcs./layer), P4, P5 – packed together on the pallet (P4 - 6 pcs./layer; P5 - 55 pcs./layer).
1 grey2 graphite3 red4 brown5 olive6 yellow7 light blend8 dark blend
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
PIAZZAgrey
PIAZZAgraphite
PIAZZAred
PIAZZAbrown
OLD COBBLE BLOCKS
PIAZZAyellow
PIAZZAolive
PIAZZAlight blend
PIAZZAdark blend
8584
OLD COBBLE BLOCKS
8786
Classics speak for themselves. The form resembles cobblestones of streetsand sidewalks in historic parts of old towns. This is an excellent and provenmaterial used near one-family houses, in avenues and city squares.
OLD COBBLE BLOCKS
8988
1 2
3 4
6
N1 N2 N3
1 grey2 graphite3 red4 brown5 olive
1300
COLOURS
TECHNICAL DATA
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
p a l i s a d e
It is a supplementation of Piazza and Nostalit. It finds application first of allin the building of stair steps. They can also be used as an element enclosing treesand decorative plants and also as a delimiter of cobble blocks.
OLD COBBLE BLOCKS
9190
1 2
3 4
65
1 grey2 graphite3 red4 brown5 olive6 yellow
GUIDELINES FOR PALISADE ERECTION
Palisade PIAZZA
42
COLOURS
TECHNICAL DATA
heightin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
Palisades should be embedded in the ground or in a concrete foundation.The depth of embedment in concrete should equal ¼ of the palisade height.After digging out the trench for embedding the foundation, put a layer of gravelor similar material at least 10 cm thick and compact it. Then put a layer of wetconcrete B15 and put in it the palisades one by one making them verticaland level. Finally, using the same concrete, pour it on the palisades from the frontand rear taking into account the gaps between them.
All types of filling the retaining walls should be made using frost-resistant material.Water should be drained by means of a filtration layer with drainage or throughgaps in the palisade. Failure to perform correct water drainage causes that, in winter,ice can damage the palisades.
LUNARp a l i s a d e
Lunar palisade is a very popular semi-circle finishing element. Due to its form,it gives the edges mild shapes of arches of any radius. This is an interesting settingboth for stairs, paths, flowerbeds and terraces.
OLD COBBLE BLOCKS
9392
1 2
3 4
65
Palisade LUNAR
1 grey2 graphite3 red4 brown5 olive6 yellow
Palisades should be embedded in the ground or in a concrete foundation.The depth of embedment in concrete should equal ¼ of the palisade height.After digging out the trench for embedding the foundation, put a layer of gravelor similar material at least 10 cm thick and compact it. Then put a layer of wetconcrete B15 and put in it the palisades one by one making them verticaland level. Finally, using the same concrete, pour it on the palisades from the frontand rear taking into account the gaps between them.
All types of filling the retaining walls should be made using frost-resistant material.Water should be drained by means of a filtration layer with drainage or throughgaps in the palisade. Failure to perform correct water drainage causes that, in winter,ice can damage the palisades.
GUIDELINES FOR PALISADE ERECTION
COLOURS
TECHNICAL DATA
heightin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
OLD COBBLE BLOCKSPATTERNS OF ARRANGEMENT
PIAZZAPattern of arrangement no 1 Pattern of arrangement no 2 Pattern of arrangement no 3 Pattern of arrangement no 4
Pattern of arrangement no 6 Pattern of arrangement no 7 Pattern of arrangement no 8 Pattern of arrangement no 9
Pattern of arrangement no 10 Pattern of arrangement no 11 Pattern of arrangement no 12
ECOLOGICAL PRODUCTS1. EKOSTRADA2. OPEN-WORK TILE3. MEBA TILE4. FLOWER POTS VERDURO, GRANDE I PICCOLO
1 2
3 4
ECOLOGICAL PRODUCTS
Ekostrada is an exceptional block combining the qualities of traditional and ecological blocksthrough which water flows to the ground through lateral outlets. The washed surface of the fine-grainedstructure gives it a distinction character. Due to its structure, it is ideally suited for the creationof "green vehicles" assuring drainage of water to the ground. They can also be used in parking lotsfor vehicles up to 3.5t weight, splash aprons around houses, garden paths, patios and courtyards.
washed blocks
EKOSTRADAlight grey
EKOSTRADAgraphite
EKOSTRADAyellow
EKOSTRADAbrown 9796
6,5
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
ECOLOGICAL PRODUCTS
The open work tile, due to its structure, is perfectly suited for hardening parkinglot surfaces, access roads, banks and escarpments. It combines perfectlywith the greenery of every garden giving it aesthetical look. Square internalspaces after their filling with grass, fine stones or bead, make the open-work tilean ideal solution for all those who seek ecological and durable solutions.
1 gray2 graphite3 red1 2 3
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
open workt i l e
ECOLOGICAL PRODUCTS
The open-work Meba tile, due to its structure, is perfectly suitedfor hardening parking lot surfaces, access roads, banks
and escarpments. It combines perfectly with the greeneryof every garden, giving it an aesthetical look.
9998
1 gray2 graphite3 red1 2 3
t i lethickness
in cmlengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
Concrete planters are perfectly suited for creating of so-called “flourishing” walls.They are bottomless, which allows rainwater to infiltrate to lower levels. The plantersare often used for building fences and strengthening banks and embankments. They arealso used as enclosures of retaining walls. They also find application during the creationof so-called “small” architectural objects around a house.They are manufactured in two sizes: mini and maxi.
1 grey2 graphite3 red4 brown1 2 3 4
ECOLOGICAL PRODUCTS
p l a n t e r s
planter heightin cm
lenghtin cm
widthin cm
Qty. of m2
/palletapproximate
palletweight in kg
101100
Concrete planters in a half-moon shape are perfectly suited for the creationof so-called “flourishing” walls. They can also be an interesting architectural
element helping in the organization of the garden space. They are bottomless,which allows rainwater to infiltrate to lower levels. The planters can be used
as enclosures of retaining walls. They are also used for building fencesand strengthening banks and embankments.
They are manufactured in two sizes: Piccolo and Grande.
1 grey2 graphite3 red4 brown1 2 3 4
ECOLOGICAL PRODUCTS
p l a n t e r s
plant pot heightin cm
lenghtin cm
widthin cm
Qty. of m2
/palletapproximate
palletweight in kg
ECOLOGICAL PRODUCTSPATTERNS OF ARRANGEMENT
Reinforcement of banks from Verduro planters should be made using the elements of the same type. The base serves as a foundationmade from concrete of class B20 (as per drawing). The elements should be embedded in layers and immediately filled with earth.Maximum reinforcing bank height using the Verduro Mini planters is 125 cm, and higher structures should be designed individuallytaking into account the pressure of earth masses. There is a possibility of multi-step reinforcement of the bank, however, in this case,the bank should be offset – see the drawing. During erection of the reinforcement, the level, the rectilinearity and arc radius of the laidout elements should be checked as well as the inclination of the performed reinforcement.
wall offset
GUIDELINES FOR ARRANGING VERDURO PLANTERS
foundation
INDUSTRIAL PRODUCTS
1 2
3 4
5 6
7 8
1. BEHATON2. HOLLAND3. UNISTONE4. UNIDEKOR5. CONCRETE BLOCK6. KERBS7. DITCH LININGS8. EKOBORD
This block has classic, rectangular shape. It is used for making all typesof pavements. This is manufactured in two thicknesses: 6 and 8 cm.It is designed for laying sidewalks, access roads, parking lots and alltype of storage yards. Due to its simple form, it allows making quietand uniform surfaces.
COLOURS
1 grey2 graphite3 red4 brown5 olive6 yellow
1
4
2
5
3
6
INDUSTRIAL PRODUCTS
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2/
palletapproximate
palletweight in kg
Chamferless
Chamferless
INDUSTRIAL PRODUCTS
COLOURS
1 grey2 graphite3 red4 brown5 olive6 yellow
1
4
2
5
3
6
Behaton block is one of most popular cobbleblocks due to its highmechanical strength, durability and variety of applications.It is especially recommended for paving sidewalks, squares,
parking lots and also large storage areas. The Behaton blocksare applied everywhere where the surface is exposed to high loads.
105104
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2
/palletapproximate
palletweight in kg
Chamferless
1
4
2
5
3
6
Uni-stone block has a multi-purpose application. It is designed for paving surfacesexposed to high loads in, among others, access roads, parking lots and storage yardsbut also sidewalks and paths. It is manufactured in two sizes: 6 and 8 cm.
COLOURS
1 grey2 graphite3 red4 brown5 olive6 yellow
INDUSTRIAL PRODUCTS
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2
/palletapproximate
palletweight in kg
1
4
2
5
3
6
It is a very popular block that makes possible the creation of both small and largeaesthetic pavements. Uni-dekor belongs to the family of industrial products
so it is perfectly suited for paving sidewalks, avenues, parking lots and playgrounds.
107106
INDUSTRIAL PRODUCTS
COLOURS
1 grey2 graphite3 red4 brown5 olive6 yellow
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2
/palletapproximate
palletweight in kg
Concrete blocks are intended for the erection of walls with joints made from normalor light mortars, for instance, structural walls in garages, cellars and undergroundrooms when the product is completely protected against water penetrationand weather conditions. The concrete blocks are also manufactured in a rustic versionwith a decorative rock fracture surface in three colours: grey, red and graphite.The decorative surface is on one plane of the block 120mm/380mm.
1 2 3 4
INDUSTRIAL PRODUCTS
CONCRETE BLOCK
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2
/palletapproximate
palletweight in kg
COLOURS
109108
Kerbs and borders are elements manufacturedfrom high-grade concrete. They find application as:
● limiters for sidewalks and roadways● small retaining and encompassing walls
● borders for trees, plant terraces and garden compost heaps● flights of stairs
Skew curb L and R – packed in sets on the pallet (skew L - 4 pcs./pallet; skew R - 4 pcs./pallet), R1 makesa circle of 1m radius, R3 – makes circle of 3 m radius, R5 – makes circle of 5m, R8 – makes circle of 8 m radius.
Colours: grey, graphite, red, brown and olive are available only for borders 6 cm thick. The borders 8 cm thickare available in colours: grey, graphite and red. Buffer and kerbs are manufactured only in red colour.
CONCRETE BLOCK COLOURS1 smooth grey, 2 rustic grey, 3 rustic graphite, 4 rustic red.
INDUSTRIAL PRODUCTS
kerbs
thicknessin cm
lengthin cm
widthin cm pcs./mtype pcs.
/palletapproximate
palletweight in kg
BORDERS
BUFFER
STRAIGHT
SLOPED
LEFTSKEW
RIGHTSKEW
HALF--PIECE
STRAIGHT
LIG
HT
KERB
HEA
VY
KER
BAR
CHED
EXT
ERNA
L CU
RB
Ditch lining is an element completing the offer designated for road building.Ditch linings allow draining excess of rainwater from streets, access roads,sidewalks paths, yards, parking lots etc.
ditch liningINDUSTRIAL PRODUCTS
thicknessin cm
lengthin cm
widthin cm pcs./m pcs.
/palletapproximate
palletweight in kg
to
Triangle ditch linings complete the offer of products intendedfor road building. They allow draining excess rainwater from
streets, access roads, sidewalks paths, yards, parking lots, etc.
111110
INDUSTRIAL PRODUCTS
ditch liningtriangle
Blocktype
thicknessin cm
lengthin cm
widthin cm pcs./m2 Qty. of m2
/palletapproximate
palletweight in kg
INDUSTRIAL PRODUCTS
Universal rim for separating different types of surfaces.
Application: - cobble blocks, - slabs, - granite blocks,
- gravel and ground surfaces, - lawns, shrubs, flowerbeds, - garden architecture.
Height of fixing anchor is 24.5 cm.All elements are made from plastic.
heightin cm
widthin cm
lenghtin cm pcs./m
ECOLOGICAL PRODUCTSPATTERN OF ARRANGEMENTS
ECOLOGICAL PRODUCTSPATTERN OF ARRANGEMENTS
113112
coverage: about 35 pcs./m2
The borders should be set so as to prevent lateral spreading or setting of the pavement made from cobble blocks or slabs. The cobbleblocks and slabs have tight dimensional tolerances therefore it is necessary to lay single rows of blocks or slabs before setting the bordersin order to determine the correct distinction between the borders limiting the width of the pavement.
Method of completion:1. Dig out a trench 20 cm deep and of width equal to the width of the spade and half fill it with the concrete with the consistency of wet earth and level its surface.2. Set the borders and align them. Using a rubber hammer drive in (and set) the borders at the required height, at the same keeping time the required inclination of the pavement. Places where the elements contact with each other should be covered with concrete along a length of about 30 cm.
Note:The individual pieces of border should not be joined with mortar as cracks can occur following thermal linear expansion of elements.Additionally, such a method of joining causes ugly-looking stripes at places of joints.
place of contact
border
lean concreteheight about 10 cm
trench about 30 cm highand 20 cm deep
natural groundor well-compactedmade ground
coverage: about 39 pcs./m2
coverage: about 50 pcs./m2 coverage: about 38 pcs./m2
TILESDECORATIVE SYSTEM SMALL ARCHITECTURE
1. ROCK BEAD BLASTED TILES2. BLUES CURLING TILES3. ETNO4. SANDSTONE DECORATIVE TILES5. POP SMOOTH/ BEAD BLASTED6. PINO DECORATIVE SYSTEM7. SANDSTONE WET CAST8. CORNER SMALL ARCHITECTURE
1
5
2 3 4
6 7 8
DECORATIVE TILES
The collection “Autumn Inspirations” is a proposal of bead blasted tilesin three colours of brown shades which can be combined in order to obtaina warm, harmonious pavement. They are recommended for building terraces,garden paths, promenades, city squares and public facilities.
bead blasted tiles
ROCK AUTUMN INSPIRATIONSlight beige 4B30
ROCK AUTUMN INSPIRATIONSbeige 4B01
ROCK AUTUMN INSPIRATIONSbrown 4B02
117116
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
DECORATIVE TILES
bead blasted tiles
119118
Distinction bead-blasted tiles are manufactured in two shades of grey with a mixtureof granite or marble in the upper layer which makes them all-purpose, timeless and beautiful.The use of distinction aggregates gives their surroundings the appearance elegance and luxury.This is a product of the highest class, resembling in appearance natural stone and is idealfor building squares, terraces and representative venues.
DECORATIVE TILES
bead blasted tiles
ROCKALONG THE WAY WITH DISTINCTIONmarble 4BCM1
ROCKALONG THE WAY WITH DISTINCTIONgranite 4BCG1
121120
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Rock tiles are manufactured from specially selected grades of aggregate which are addedto the upper layer which creates a high-class product which resembles natural stonein its appearance. They are recommended for building terraces, garden paths, promenades,green squares and city squares.
DECORATIVE TILES
bead blasted tiles
ROCK
yellow 4B07light grey 4B53
ROCK
honey 4B62pepper and salt 4B56
ROCK
red 4B63graphite 4B61
123122
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Marble and granite with a surface looking like a rock fracture appears extremely eleganton terraces and garden paths. Two tiles made from distinction granite aggregates combinein a sophisticated taste of classic pavements. They are an excellent supplementation of stonewalls and wooden pergolas. They are also great for home swimming pools and secludedsummerhouses. They harmonize especially well with washed blocks which are betterfor access roads to garages.
SANDSTONESTRUCTURE
DECORATIVE TILES
bead blasted tiles
ROCKSANDSTONE STRUCTUREmarble 4BCM1
ROCKSANDSTONE STRUCTUREgranite 4BCG1
125124
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
SANDSTONESTRUCTURE
DECORATIVE TILES
bead blasted tiles
127126
This tile is manufactured from specially-selected aggregates imported from ItalianDolomites. It has the structure of slate, which was also subject to bead blastingto reveal the natural colour of its distinction stone. With its colour, it adds graceto terraces and garden paths. It can successfully be used in alleys and city squares.
SLATESTRUCTURE
DECORATIVE TILES
bead blasted tiles
ROCKSLATE STRUCTURE4B05
129128
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Rock border is an element supplementing the terrace tiles. It is built from distinctionaggregates (marble, granite) which give it a uniform colour. It is also bead blasted,which makes it similar to the upper layer of terrace tiles. Terraces built usingthis product are extremely aesthetic and elegant.
ROCK BORDERS
DECORATIVE TILES
NEW
ROCK BORDERmarble
ROCK BORDERgranite
131130
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
The tiles owe their unique character to distinction Italian aggregates of which their upper layer is built.Due to a special technological process, the tile surface becomes pleasantly smooth. The structure becomesmore consistent and the colour of stone more accentuated. “Autumn inspirations” is a set of three colourswhich become a decoration, particularly for terraces and garden paths. They are easy to clean and anti-slip.They harmonize especially well with smooth and aged blocks in “Coffee inspirations” in paving accessroads to garages.
DECORATIVE TILES
CURLING TILES
BLUESAUTUMN INSPIRATIONSlight beige 4E30
BLUESAUTUMN INSPIRATIONSbeige 4E01
BLUESAUTUMN INSPIRATIONSbrown 4E02
133132
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
This tile resembles granite and marble stone tiles. The colour and look of the surface is closelyconnected with the selection of distinction aggregate that fills the upper layer of this product.Additionally, the curling process polishes the surface and accentuates the stone colours.It is mainly used on terraces and garden paths and also within urban spaces in squares, placesand shopping arcades. It perfectly harmonizes perfectly with elegant washed blocks.Such a combination of materials adds to the consistency of the created composition.
DECORATIVE TILES
CURLING TILES
BLUESALONG THE WAYWITH DISTINCTIONmarble 4ECM1
BLUESALONG THE WAYWITH DISTINCTIONgranite 4ECG1
135134
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
SLATESTRUCTURE
Never have terrace tiles had such a pleasant feeling. The upper layer of the structure of slateconsists exclusively of distinction Italian aggregates. After special processing, they havea smooth surface that resembles the stones from the streets of Mediterranean towns. The tilesare easy to clean and add grace and elegance. They are used on home-adjacent terraces,garden paths, alleys and city squares.
DECORATIVE TILES
CURLING TILES
BLUESSLATE STRUCTURE4E05
137136
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
SANDSTONESTRUCTURE
These are of types of tiles which are built almost entirely from marble and granite with the structureof natural rock fracture. They are subject to a special technological process which produces a consistentpolished surface of natural of natural fractured rock. Terraces and garden paths made from this materialmake good decoration of elegant mansions and one-family houses. The tiles are anti-slip and are easyto maintain. They harmonize especially well with washed blocks which are best for access roads to garages.
DECORATIVE TILES
CURLING TILES
BLUESSANDSTONE STRUCTUREmarble 4ECM1
BLUESSANDSTONE STRUCTUREgranite 4ECG1
139138
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Etno – the surface of this tile resembles, both in terms of colour and structure, natural travertine.Its warm and toned-down colours take on a slightly Mediterranean character. Terraces and pathsaround a house made from Etno tiles look spectacular.
d e c o r a t i v e t i l e s
DECORATIVE TILES
ETNOcreme 4C68
ETNOamber 4C69
141140
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Sandstone – the top texture of this tile truly shows the beauty of natural sandstonedue to which the tile harmonizes perfectly with the environment of every house.The sandstone tiles can be successfully used for building terraces, garden paths,elegant patios, courtyards or squares.
decorative tiles
DECORATIVE TILES
sandstone
SANDSTONEyellow 4C66
SANDSTONEbrown 4C67
143142
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Pop tiles confirm that beauty is hidden in simplicity. Large sizes and smooth surfacesallow composing consistent and functional pavements which are ideally suited for buildingall kinds of sidewalks, paths and promenades.
s m o o t h t i l e s
DECORATIVE TILES
POP SMOOTHgrey 1A01
POP SMOOTHred 1A02
POP SMOOTHgraphite 1A03
145144
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
Pop tiles are bead-blasted to produce interesting surface structures. They are ideally suitedfor building all kinds of sidewalks, yards, promenades and also squares and alleys around a house.
bead blasted tiles
DECORATIVE TILES
POP BEAD BLASTEDgrey 1B01
POP BEAD BLASTEDred 1B02
POP BEAD BLASTEDgraphite 1B03
147146
tiletype
thicknessin cm
lengthin cm
widthin cm pcs./m2 pcs./
palletapproximate
palletweight in kg
DECORATIVE SYSTEM
Pino is a decorative system that resembles a finished pine wood. It is created for thosewho require materials that are in line with the natural landscape. The system consistsof planks with three different lengths and two types of palisade. Additionally, there arefive sizes of pots available which make an interesting setting for flowers, decorativeshrubs and trees.
Please remember before filling the pot with earth to protect the walls using,for instance, a dimpled membrane so as to prevent low temperatures damagingthe pot. All components are available in two colours: light and dark. Terracesand garden paths built in the Pino system contribute to the creation of a dreamyclimate. Time spent in such garden is very pleasant.
D E C O R A T I V E S Y S T E M
PINODECORATIVE SYSTEMlight
PINODECORATIVE SYSTEMdark
149148
plankpalisade
small -
large
large
small Asmall B
medium Amedium B
pot
small
small
small
medium
large
large
large
medium
type dimensionsin mm pcs./pallet type dimensions
in mm pcs./pallet
stumpwith bark
stumpwithout bark
DECORATIVE SYSTEM
D E C O R A T I V E S Y S T E M
151150
Inspired by the beauty of natural stone, we created a product which truly represents the character of sandstone.Both colours and texture resemble the appearance of rock fracture. The tiles ideally combine and harmonize with thesurroundings of a house, creating a feeling of naturalness and freshness. What is important, when building the steps,both the colour and texture of sandstone are kept on the lateral surfaces of tiles. In the offer there is a system of fourtiles of different dimensions additionally enriched by three elements making up a circular system. They are availablein light and dark colours. These are the two brown-orange shades which are the most common colours of sandstone.
DECORATIVE TILES
sandstone
SANDSTONE WET CASTlight
SANDSTONE WET CASTdark
153152
An entire circle is packed on a pallet. It is also possibleto buy a half-circle. The circle diameter is about 230 cmwithout joints.
tiletype
thicknessin mm
thicknessin mm
lengthin cm
widthin cm
pcs./pallet(1 circle) pcs./m2element pcs./
palletapproximate
palletweight in kg
A new line of products – Corner System – includes elements of small urban architecture consistingof benches and pots which can be composed in different configurations. It is manufactured in twocolours: graphite and light grey. The external texture is made up of natural materials in the formof distinction aggregates which were bead-blasted. This line of products features eleganceand minimalistic simplicity. It is ideally suited for squares, promenades, gardens and in parksand sacral places.
SMALL ARCHITECTURE
CORNERlight grey 4B53
CORNERgraphite 4B61
155154
TECHNICAL DATA
TIPS AND GUIDANCE
Commonly accepted principles of laying cobbles and terrace tiles and information about bloomingand deviation from colours.
Before purchasing the cobble blocks, select their thickness depending on loads and tra�c volume. The concrete tiles and blocks of thickness from 40 to 60 mm should be laid in pedestrian courses, for instance, on sidewalks, garden alleys, terraces etc. To make access roads to a property, it is necessary to use cobble elements of a minimum thickness 60 mm and a correct base course adequate for the loads. If the tra�c of heavy vehicles is expected, then use the blocks of thickness 80 mm or more, remembering about the correct preparation of the substructure. Practically, the principles of colour or tile selection are equally important as their aesthetical qualities. Because of the above-mentioned reasons, it is advisable to order the paving project and its realization from a reputable company specializing in paving.
Pavement project
Before commencing with cobbling work, it is advisable to prepare the design of the pavement. Due to that it is possible to calculate actual demand for cobble blocks allowing some surplus for trimming. It is better to buy a little more material and its surplus may be used for making additional segments of pavement or possibly for replacement of damaged elements in the future. It should be remembered that between blocks of the same type there may be di�erent shades, which is quite normal. It is a natural product so sometimes another shade of sand used for production or di�erent weather conditions during curing may result in di�erent colours of blocks from di�erent production batches.
Ground
Before commencing with cobbling work, check the base ground. It is advisable to perform a geological survey especially in case of tra�c on the pavement to be constructed. The base ground should be uniform and of correct load-bearing capacity. It is also important to protect it against excessive wetness and freezing.
Bedding
In natural ground, perform necessary grading and dewatering lines. To this end, the level run of the sidewalk is shaped; bends are set out, as well as transition curves and junctions. Necessary tools depend on the scope of work. In the case of small area pavements, a straightedge and mason’s level should be enough. Large area pavements, however, require heavy road building machines to be used.
Base course
Depending on properties of the ground substructure and expected design loads of the pavement, the base course should be made which makes up the construction layer. Most often they are made from a mixture of sand and gravel with an aggregate fraction from 0 to 32mm which in some cases is stabilized, with a mixture of cement. In case of higher loads, substructures from lean concrete are used or from construction concrete. When pro�ling the substructure, remember to make a necessary gradient allowing drainage of rainwater. The construction layer is compacted to obtain appropriate stabilization. The base course should be so stable that the sand sub-crust cannot sink into it. All roughness of the construction layer in�uences the thickness of sand sub-crust and, in consequence, the roughness of the surface after compaction. Incorrectly selected loads and incorrectly completed base course have an adverse e�ect on aesthetical qualities and cause damage to the performed the pavement.
The base course should meet the following requirements:
- load capacity should be su�cient for highest admissible tra�c volume according to the requirements provided in the table below- the axis should be appropriately located within the plane and a correctly shaped surface will assure required dewatering of the pavement according to the project documentation- the base course should be bordered from all sides with curbs or borders or with other added pavement between which the abrasive layer from vibro-pressed pavers should be laid.
Sub-crust
The sub-crust, depending on type of loads, is made from sand, sand mixed with cement, gravel or key aggregate of particle size 2-4mm. The sub-crust layer is generally from 30 to 50 mm thick and its surface should be �ushed using straightedge. Level surface of the sub-crust should be left loose without compaction.
157156
Laying blocks and tiles
Before commencing with laying the pavement, check whether the delivered materials are conforming to the order. On the previously made sub-crust, lay thecobbling elements, observing the necessary distinction (joints) 3 - 5 mm between them. The spacers which are on some types of blocks or tiles are meant to facilitate the correct laying of pavement but they alone do not assure correct width of joints. Material should be laid so as to prevent shifting of laid rows on the sub-crust layer. In order to avoid di�erences in colour shades, mix products from at least 3 pallets. The laid pavement should be �lled in joints with sand of particle size 0-2 mm at about 2/3 height. Course-grained sand can suspend and cause non-uniform �lling of joints. Correct �lling is important in order to prevent shifting of tiles or blocks, which can result in shearing the edges of elements following mutual pressure. Before compacting, the sand used for joint �lling should be removed from the surface.
Compaction
The plate of the compactor should be even and clean and additionally protected by a �exible cover. The surface of tiles or blocks should be dry and clean without traces of sand used for �lling. Compaction should be carried out “smoothly” so as to avoid punctual compaction. After compaction has been �nished, replenish the �lling of the joints to full height with sand. Complete �lling of joints assures correct load bearing capacity of the performed pavement.
Guidelines
The pre-condition for good performance of the pavement is draining the rainwater. Therefore, it is recommended to make an inclination of the surface up to 2.5-4%. Axis of the pavement from cobble blocks cannot be o�set in relation to the designed axis by more than 2 cm. Deviations of height for the abrasive layer from the designed ordinate of height cannot exceed 2 cm. The block surface should be even, so as after applying the straightedge 4 m long in every direction, the deviations do not exceed 8 mm. Deviations from the width should not exceed 5 cm. Admissible deviation of height between the planes of adjacent elements (blocks) in the abrasive layer should not exceed 2 mm for elements of smooth surface and 5 mm for elements of machined surface, for instance, by bead blasting or ageing. The block pavement laid near technical facilities infrastructure (for instance, wells, hatches) should project 3-5 mm above these facilities and 3-10 mm above ditch linings.
Principles of laying chamferless blocks
1. Chamferless blocks should be laid strictly observing the principle of leaving joints at least 3-5 mm wide.2. The cobbler should see to that the joint dimension is kept.3. The factory - made spacers on blocks require maintaining the appropriate width of the joint that protects the edges against extreme loads and, following this, shearing the edges of blocks.4. Compaction using a vibrator should always be preceded with �lling the gaps with sand up to 2/3 of the block height.5. For compaction, use only a compactor with a plastic cover on the working plate.
The above-mentioned guidelines are in practical use in the cobbling industry; however, because of the great variety of di�erent tasks which a contractorand investor may encounter, they are only for instructive purposes.
Most often encountered faultsduring laying pavement
- poor base course,- incorrectly selected type of blocks,- too tightly laid blocks,- too thin layer of sub-crust under blocks,- incorrectly pro�led surface (too high or too small inclinations),- laying blocks without mixing them from a few pallets at the same time,- compacting using machine without protecting cover from plastics.
Blooming
On cobbling products may appear discolorations in the form of white tarnish. This results from manufacturing faults. Blooming appears following natural physical and chemical processes taking place in concrete. Calcium hydroxide produced during the hydration of concrete has a direct e�ect on blooming. A part of this calcium compound which is not permanently bound with other concrete ingredients gets to the surface as a result of water evaporation, making a white tarnish on the surface of blocks – calcium carbonate. With time, it becomes an easily-soluble bicarbonate. Following this chemical reaction and rain and abrasion of the surface, the blooming gets washed and disappears after some time. This process lasts from 1 to 3 years.
According to the applicable Polish Standards PN-EN 1339 and PN-EN 1338 – Requirements and test methods as per point 5.4.1 :” .... Possible blooming has no adverse e�ect on performance characteristics …(blocks, tiles)… and it is regarded as insigni�cant.
Point 5.4.3. – Colouration „.... Di�erences in colour uniformity …(blocks, tiles)…, which can be caused by unavoidable changes in the properties of raw materials or by change of curing conditions are regarded as insigni�cant”.It should be stressed that blooming is completely independent on a manufac-turer. Technological e�orts concentrate on limiting these phenomena.
Deviations from colour
Despite control of all factors in�uencing the quality of colours and using highest quality dyestu�, small deviations of colour on the element surface may appear. They are unavoidable because of natural �uctuations of colours in raw materials and they do not cause deterioration of product quality. Also, age of concrete has a signi�cant e�ect on changes in colours. It is connected with the natural stabilization of colour. To avoid di�erences in colour, the blocks should be laid by taking them from 3 di�erent pallets.
TECHNICAL DATA
IMPREGNATE BUSZREM
Impregnate for cobble blocksand terrace tiles
The impregnate is intended both for cobble blocks, tiles and other concrete pavements. It penetrates capillary pores without changing original colours and anti-slip properties of concrete. It is resistant to alkali and enables “breathing” of concrete. Products protected with the impregnate become much more resistant to dirt such as combustion deposits, clay, food stains (stains of ink, red wine, co�ee, ketchup, mustard mayonnaise). Liquids poured on the surface protected with the impregnate do not penetrate concrete structure provided they are quickly removed (depending on the kind of soiling, from a few hours to a few days).
Method of application:
Apply on surfaces at a temperature from +5°C to +30°C during rainless weather. The impregnated product should not soak water or contaminations from the substrate. The impregnated surface should be dry, clean, without blooming and other contaminations and coats. The undiluted product should be applied uniformly using a spray gun, brush or roll. Consumption depends on absorbability and is about 100 - 300 ml/m2. When tiles have already joints �lled with impermeable �lling, they should be impregnated after the joints have been �lled. If there is sand in joints or the joint is permeable, impregnation should be done before �lling the joints.
Storage:
Protect the product against freezing, high temperatures and direct sunlight. Keep at a temperature of 5°C - 25°C.
Information on safe handling:
Avoid contact with eyes. In case of contact, wash eyes immediately using copious amounts of running water. If the symptoms persist, consult a doctor.
TECHNICAL DATA
NOTES
159158
TECHNICAL DATA
NOTES
TECHNICAL DATA
NOTES
161160
TECHNICAL DATA
NOTES
COBBLE BLOCK PRODUCTION PLANT 13-214 UZDOWO, GRALEWOPHONES: 23 696 55 42 ext. 44PHONES: 23 696 55 45
SALES DEPARTMENTPHONES: 23 696 55 42 ext. 120,126
PREFABRICATION PLANT SOCHACZEW96-500 SOCHACZEWUL. INŻYNIERSKA 32PHONES/FAX: 46 863 16 27PHONES: 46 863 16 28
FACTORY WAREHOUSE NO 1WARSZAWA - REGUŁY05-816 MICHAŁOWICEUL. KRÓLEWSKA 24FAX: 22 723 29 59MOBILE: 696 488 860
FACTORY WAREHOUSE NO 205-070 SULEJÓWEKUL. TRAKT BRZESKI 148MOBILE: 600 301 376
FACTORY WAREHOUSE NO 3OLSZTYN10-454 OLSZTYNUL. LEONHARDA 5B
MOBILE: 600 301 343MOBILE: 600 301 384
FACTORY WAREHOUSE NO 9OLSZTYN10-699 OLSZTYNUL. JAROCKA 21MOBILE: 784 000 913
FACTORY WAREHOUSE NO 496-317 GUZÓWUL. ŁUBIEŃSKICH 4MOBILE: 600 301 360
FACTORY WAREHOUSE NO 526-613 RADOMUL. RAJEC PODUCHOWNY 89MOBILE: 600 301 379
FACTORY WAREHOUSE NO 6RZESZÓW35-007 KRASNE, KRASNE 16PHONES: 17 855 58 11
FACTORY WAREHOUSE NO 795-082 DOBROŃUL. WROCŁAWSKA 9CPHONES: 43 650 33 42MOBILE: 600 301 342
FACTORY WAREHOUSE NO 8GDAŃSK80-297 MISZEWKOUL. SŁONECZNA 4PHONES/FAX: 58 728 42 77MOBILE: 600 301 371
FACTORY WAREHOUSE NO 1087-100 TORUŃUL. MORWOWA 6PHONES: 56 648 41 34FAX: 56 648 06 32MOBILE: 600 470 608
FACTORY WAREHOUSE NO 1115-620 BIAŁYSTOKUL. ELEWATORSKA 29MOBILE: 600 301 340
FACTORY WAREHOUSE NO 1213-306 KURZĘTNIKUL. LIDZBARSKA 3PHONES: 56 472 74 45MOBILE: 662 257 958
FACTORY WAREHOUSE NO 1332-020 WIELICZKAUL. BOGUCKA 20UL. WIERZYNKA 7PHONES: 12 289 25 80MOBILE: 606 961 347MOBILE: 606 247 221
FACTORY WAREHOUSE NO 1439-300 MIELECUL. PIASKOWA 6UL. WITOSA 11UL. KORCZAKA 12PHONES: 12 289 25 80MOBILE: 696 099 866
FACTORY WAREHOUSE NO 1562-006 BOGUCIN K/POZNANIAUL. GNIEŹNIEŃSKA 187MOBILE: 796 003 003
www.buszrem.pl
163162
COMPANY’S HEAD OFFICE
PRODUCTION SITES
FACTORY SALE WAREHOUSES
ARE YOU INTERESTED IN COOPERATION? PLEASE FEEL FREE TO CONTACT US: 600 301 378
BUSZREM S.A.97-300 PIOTRKÓW TRYBUNALSKIUL. ŻWIRKI 9PHONES/FAX: 44 647 63 45E-MAIL: [email protected]
MARKETING:MOBILE: 692 401 010E-MAIL: [email protected]
ACCOUNTS:PHONES: 2369655 42 to 44, ext. 153LABORATORY:PHONES: 2369655 42 to 43, ext. 112
www.buszrem.pl
desig
n: d
2stu
dio,
ww
w.d
2stu
dio.
com
.pl,
phot
ogra
phy
Sław
omir
Brzo
zow
ski,
ww
w.sl
awek
brzo
zow
ski.p
l
Ask for our catalogues:
SBB System,catalogue of ready projects.
SBB System, description of technology.
SBB System,advantages of construction.