Business Closing Sale

UNIT 23, BAR LANE INDUSTRIAL ESTATE

NOTTINGHAM, NG6 0JA

Range of Steel Working Equipment Forklifts, Welders, Tools

New Steel, Sundries And Effects

On FRIDAY 16th DECEMBER 2016

At 10:30am

GENERAL NOTES Situation Bar Lane Industrial Estate lies close to the A610 on the outskirts of Nottingham and has excellent national road network access. From the M1 at Junction 26 pick up the A610 signposted towards Bullwell, Stapleford and Nottingham, at the first main roundabout take the 3rd exit onto the A610 and pass the Nuttall Inn on the right-hand side. At the main Cinderhill roundabout continue on the A610 towards Nottingham and Arnold and after 600 yards pass the KFC on the right and the Tesco’s Express on the left. At the next main lights turn left onto the B6004 for Arnold signposted Basford Hall College. Continue passed the fire station on the left and at the mini roundabout continue straight over (do not go left towards Arnold). Bar Lane lies 600 yards on the right with the entrance to the industrial estate up the lane on the left. ‘To the Sale’ and ‘Car Park’ signs will be erected on the morning of the sale. Please refer to the location map within the catalogue. Car Park - As sign posted on the sale day- purchasers please note there will be limited car parking on the sale site. Post Code – NG6 0JA Value Added Tax - The vendors are not registered for VAT and there will be no VAT payable on the auction bid price. Telephone Number(s) on Sale Day – 07973 673092 Mark Elliott 07973 982443 Peter Oven Cheques/Payments-Payment Is Required On Sale Day Intending Purchasers not known to the Auctioneers must produce, prior to bidding, an acceptable Banker’s reference. Under new regulations introduced by the Banks, such references are now only obtainable by the Bank’s customers themselves and have to be obtained by them direct from their Bank and forwarded to us. Unless an acceptable Banker’s Reference is produced Payment is Strictly Cash. Persons unknown to the Auctioneers and who pay by cheque will have their goods impounded until cheques have cleared. The Auctioneers reserve the right to refuse a bid off any potential unknown customer. All bidders should note that in many cases video security will be on site. Viewing and Inspection – Strictly on the morning of the sale. Conditions of Sale – Bagshaws usual farm sale conditions of sale shall apply at this sale, copies of which are available from the Town offices or the on site sale office-All Lots Are Sold As Seen-No Warranty. Cash – Under the money laundering regulations the auctioneers are unable to accept cash in sums greater than €15,000 (or its Sterling equivalent). Please contact the auctioneers to discuss methods of cash payment prior to the sale. Buyers Premium – No buyer’s premium will be payable at this sale. Special Removal Arrangements-Collection Items may be removed from Unit 23 up to 5pm on sale day and thereafter specifically on Tuesday 20th December between 9am and 4pm. Site Clearance Purchasers must note that the site must be cleared by 4pm on Tuesday 20th December and there will be no further access.

Auctioneers Main Office – Tel: 01889 562811 – Fax: 01889 563795 www.bagshaws.com

FOREWORD This genuine small sale of steel worker’s equipment and fabrication items arises as a result of the cessation of trading at Unit 23 after 15 years of business. Everything is for genuine sale and no VAT or buyer’s premium will be charged.

Health & Safety at Work Act 1974

It is expressly brought to the bidders attention that at the time of sale, items of plant, machinery and equipment may not necessarily comply with the requirements of the Health & Safety at Work Act 1974, and its’ associated regulations, governing the use of plant, machinery, and equipment at work. Whilst Bagshaws take all reasonable steps to ensure the integrity of sale items, or make bidders aware of any known defects, anyone purchasing an item must ensure it is safe, and complies with all relevant regulatory requirements, before it is used in a work environment.

Steel, Stock Items, Small Tools And Sundries Various Steel Trestles Set of Alloy Steps Aluminium Ladder Small Trolley Qnty Timber Various Acro Props Steel Workshop Bench c/w Record Vice Qnty Flat Steel And Steel Treadplate Various New Stainless Steel Tubing Qnty Galvanised Steel Tubing Qnty New Flat Steel (Up To 12Ft +) Qnty New Round Tubing Various Angle Iron Qnty New Long Steel Sections (Up To 12Ft+) Several Steel Workshop Shelf Units Lifting Chains Nuts And Bolts Workshop Screens Utility 12 Volt Trailer Winch Small Generator Spares/Repair 4000 Super Winch Lorry Hiab Unit Qnty New Gas Gauges Qnty New Hydraulic Fittings Water Pump c/w Honda Engine Various 110 Volt Cables Qnty Welding Sundries Pit Light Unit Personal Safety Harness Sets Manhole Escape Winch Kit Rolison 12 Ton Pipe Bender Andrews G260 Gas Fired Space Heater Raptor 355 110 Volt Cut Off Saw Various Taps And Dies Hand Powered Sheet Metal Guillotine Cutter Large Selection Of ‘G’ Clamps And Fabrications Clamps Several Saws Various New Pins And Nuts And Bolts Qnty New Cutting Discs Various Large Drills Wolf 110 Volt Drill Single Phase Jigsaw Ryobi Single Phase Saw Single Phase Bench Grinder Single Phase Twin Wheel Polishing Unit

Steel, Stock Items, Small Tools And Sundries Continued Single Phase Clarke Mini Workshop Hoist Submersible Pump Pressure Washer Manual Punching Unit Flowfit Unit Various Air Tools/Sprayer Guns (In Lots) Set Of Large Stilsons Mobile Single Phase Hydraulic Power Pack Unit Qnty Mig Spares, Cables, Guns And Sundries Portable Screen (New-Boxed) Milling Unit Dividing Head Steel Van Volt c/w Key Petrol Driven Mower JCB Pecker Unit Dulxter AB Pedestrian Pull Workshop Pallet Truck Gerni Single Phase 4102A Hot Washer Unit- (Diesel Fired) Compressor, Welders And Cutting Machines Magnum 3 Phase Workshop Compressor Stainless Steel Workers 110 Volt Electronic Wand Startrite H250A Auto 3 Phase Bandsaw Raptor 110 Volt Circular Cut Off Saw c/w Lightweight Bench Pedrazzoli/Super Brown 3 Phase Pedestal Mounted Cut Off Saw Oerlikon Citroarc F32 (Spares Only) Migatronic KT 320 Mig/Mag 400 (Spares Only) Oerlikon Citroarc M408 3 Phase Mig Welder Stel Mini Tig Up 161 H Mini Welder Murex Tradeswing 245 Welder Hypertherm Powermax 1250 G3 Series Plasma Cutter 3 Phase c/w Sundries Murex Tradescut 20 Air Plasma Cutter (Spares Only) PRS-76 3 Phase Linisher/Pipe Scolloper Multi-Function, On Pedestal Mounting GKN Lincoln FCR 650 VC 3 Phase Mig Welder Ser No 63113 GS Genset Unit (Parts Only) Mobile Welder/Genset c/w 12 Volt Start And Kubota 3 Cylinder Diesel Engine

In Situ Steel Fabricator Machines Boschert 3 Phase Steel Guillotine/Notcher Unit Foot Controller, 3mm Cutting Capacity Victoria V1 3 Phase Heavy Duty Milling Machine c/w Cabinet of Tooling And Parts Z0PF ZB 80/2 MG 3 Phase Multi Section Bender c/w Multi Place Rollers, Tooling And Foot Controller FICEP 34 U/W Heavy Duty Metal Working Punch 3 Phase, Size 60, Punch Up To 15mm c/w Extra Punches, Dies Etc. Pearson 8Ft 3 Phase Steel Guillotine Unit Back Stop Facility, 8Ft Bed Cut Up To 13mm Plate No 6250 Geka Hydracrop 70/A 3 Phase Multi Crop Machine 70 Ton Force c/w Controls Shape 35 CNC Punch Unit 3 Phase, Hyd Driven Combi Power Pack 15 Station CNC Punch, Producer II Controlling Computer

DOSS Based Computer Unit

Mebusa 90-30 Up Stroke Press Break 3 Phase, 65 Ton Capacity, Hurco Autobend SC Controller Infrared MK II Light Guards To Front Battery Powered Forklift Trucks Kelvin PF 0.7 Pedestrian Battery Driven Forklift June 2000, 700kg Lift, Power Driven 918 Hours Lansing Bagnall Battery Driven Forklift Power Driven, Ride On ROPS Frame Charger, 2 Sets Of Pallet Tines No FRER 54024 T L