building drawing. location plan shows roads, outlines of buildings and site boundaries. symbol shows...
TRANSCRIPT
Technology Technology Department Department
Gra
phic
G
raphic
C
om
munic
ati
on
Com
mu
nic
ati
on
Building Drawing
Location Plan Shows roads, outlines of buildings
and site boundaries. Symbol shows direction of North. Drawn to scale, usually 1:1250. The site which is outlined will be
shown in greater detail.
Location Plan
Site Plan (Block) Buildings are shown as outlined
and boundaries are marked. Scale and North are indicated Waste pipes, manholes and natural
structures (trees) are indicated Important dimensions are marked. The site is numbered.
Site Plan
Floor Plan Shows the positions of rooms,
doors, windows and wall construction.
Can show positions of fixtures Electrical Heating General fixtures (kitchen units etc.)
Floor Plan 1
Floor Plan 2
Floor Plan 3
Detail Drawings Provides detailed drawing showing: Design of foundations Floor joists Wall construction Roof construction Eave details
Detail Drawings
These can be sectional views and can contain
dimensions
Preferred Scales Location Plan 1:2500 or 1:1250 Site Plan 1:500 or 1:200 Floor Plan 1:200 or 1:100 or
1:50 Detail Drawing 1:20 or 1:10 or 1:5
Symbols used 1
MH
MHNorth
Tree (existing)
Tree (new)
Tree (to be removed)
Man Hole (Soil)
Man Hole (Surface)
Piping
Symbols used 2
Lamp/Light
Switch
Junction
Cross Over
Socket
Door
Window
Sawn Wood
Brickwork
Insulation
Concrete
Symbols used 3
Radiator
Shower
Sink
Wash Basin
Bath
Sink Top
Valve