btl shortwave al mazroui
TRANSCRIPT
BTL-6000 ShorTwave
A New GeNerAtioN iN ShortwAve DiAthermy teChNoLoGy
all rights reserved. although every care has been taken to provide accurate and up-to-date information, no responsibility can be accepted for any mistakes or misprints contained in this catalogue. The products and their specifications, as shown in this catalogue, may change without notice.
BTL-6000 ShorTwave 400 BTL-6000 ShorTwave 200
User-interface Colour 5.7“ touch-screen Colour 5.7“ touch-screen
inductive / Capacitive 1 or 2 channels inductive1 channel capacitive
1 or 2 channels inductive
Power 400w Pulse200w Continuous
200w Pulse100w Continuous
optional accessories
inductive Applicators 80mm140mm
80mm140mm
Capacitive Applicators 42mm85mm130mm
Soft-rubber Plate Applicator 12 x 18cm
BT
Ldia
ther
my_
CA
T_E
N2
01
ProveN TheraPY LaTeST TeChNoLoGY
Preset Protocols BtL encyclopaedia62 indications
BtL encyclopaedia62 indications
User Programmes 100 user-defined programmes 100 user-defined programmes
Pulse Frequency 50 – 1500hz 50 – 1500hz
Pulse Length 50 – 2000µs 50 – 2000µs
Sh
or
Tw
av
e D
iaT
he
rm
Y
the BtL-6000 Shortwave is a state-of-the-art device for high-frequency heat therapy.
the use of high-frequency energy for heat therapy has the advantage of a greater penetration depth in contrast with conventional methods, such as hot packs, baths, infrared light or even microwave treatment.
the heating effect of the electrodes for the inductive and capacitive methods of application is fundamentally different.
CaPaCiTive aPPLiCaTorS
with the capacitive field method, the body part being treated is located in the high-frequency electric field between two insulated electrodes. During the capacitive method of application, the transformation of energy into heat takes place mainly in the tissues with low blood circulation (e.g. fat layer and connective tissues). therefore, the greater part of the heat is generated in areas near the skin’s surface (upper-skin fat tissue). this, combined with the distance between applicator and skin, is important in the patient’s sensation of heat.
iNDUCTive aPPLiCaTorS
the inductive field method produces high-frequency electric currents within the body tissue by means of induction. these currents will increase as the electric conductivity of the corresponding tissue region, such as tissues with good blood circulation (e.g. muscle tissue and inner organs), increases.
FieLDS oF aPPLiCaTioN rehabilitation orthopaedics Neurology Sport medicine Dermatology (wounds, burns and scars) Gynaecology eNt internal medicine Urology
moST CommoN iNDiCaTioNS
TeChNoLoGY BTL-6000 ShorTwave
intuitive operation via the touch-screen
eaSY To STarT
Pre-set therapy protocols User-defined protocols Patient database in the unit encyclopaedia with applicator placement images
maXimaL Power & SaFeTYDue to the advanced automatic tuning system and patient safety-switch
Two DiFFereNT moDeLS:
BTL-6000 ShorTwave 400 For iNDUCtive AND CAPACitive APPLiCAtioNS
Power up to 400w for optimal application possibilities (200w continual)
one channel capacitive field one or two channels inductive field Colour touch-screen user-interface
BTL-6000 ShorTwave 200 For iNDUCtive APPLiCAtioNS
one or two channels inductive field Continuous and pulsed mode Colour touch-screen user-interface
Power up to 200w (100w continual)
FreeDom oF movemeNT
SiX JoiNTeD armS For aLL TreaTmeNT PoSiTioNS From achillodynia to migraine
eaSY aPPLiCaTor SwaPPiNG Click in place, no screwing required
FULLY aDJUSTaBLe 360° rotation in 2 joints