brosura-avantgarde_eng

INTRODUCTION

-3

0

3

6

9

12

0060040020

LukoiL AVANTGARDERESISTANCE RESERVE FOR SEVERE CONDITIONS

Property stability throughout the entire service life

Protection functions

1. Superior characteristics of raw materials (group III and group I base oils) ensure high performance level.2. Use of salicylates (modern multifunctional additives) in manufacturing technology ensures neutralizing and disper-sant properties by keeping impurities in suspension and pre-venting deposit build-up.3. High total base number (TBN) guarantees anti-oxidation protection. Oil alkalinity ensures neutralization of acidic compounds resulted during the engine run.4. Presence of multifunctional additive packages in the oil formulation ensures low wear. 5. Viscosity index improver, one of the additives used in the oil manufacture process, ensures a permanent lubrication level at both high and low temperatures.

1. Exclusive technology of salicylates (modern multifunctional additives) ensures detergent-dispersant properties by keeping impurities in suspension and preventing deposit build-up.2. Ensures optimal protection of all engine components against wear and corrosion.3. Compatibility with the materials of gaskets, mechanical seals and other technical rubber parts.

Mack T-12 test(shows the base number decrease throughout the service

life)(higher index is better)

Time, hrs

Extended test

Aci

d nu

mbe

r, m

g KO

H /

g

LUKOIL AVANTGARDE PROFESSIONAL 10W-40LUKOIL AVANTGARDE PROFESSIONAL 5W-30Competitor’s product 10W-40Competitor’s product 5W-30

0

10

20

30

40

50

60

70

80

90

0 25 50 75 100 125 150 175 200 225 250 275 300

Lead

, ppm

Mack T12 corrosion test(shows lead content in oil)

(lower value is better)

LUKOIL AVANTGARDE PROFESSIONAL 10W-40Competitor’s product 10W-40

0

5

10

15

20

25

30

35

40

45

50

Cle

an p

iston

poi

nts

Daimler OM441LA test(shows piston cleaning)

(higher index is better)

LukoiLAVANTGARDE

PRoFESSioNAL10W-40

Competitor’s product 10W-40

Since 2007 when LUKOIL LUBRICANTS Intl. launched the Lukoil Avantgarde motor oil line formulated in order

to ensure low maintenance costs for older commercial vehicles with engines subjected to less severe operating conditions,

LUKOIL LUBRICANTS EAST EUROPE has been constantly introduces and promotes modern lubricants that keep up with the

new requirements of high-tech engine manufacturers, and the latest European emission standards.

So, currently, LUKOIL AVANTAGRDE PROFESSIONAL motor oils of the LUKOIL AVANTGARDE line show

improved performance levels imposed by high thermo-mechanical impacts and the air pollution emission requirements.

The LUKOIL AVANTGARDE line covers the entire range of groups and specifications applicable to DIESEL engines

(light, medium and heavy), meeting the requirements of world’s leading manufacturers of commercial vehicles and complies

with API and ACEA performance standards.

The main technical advantages of using LUKOIL AVANTGARDE motor oils are: increased life and guaranteed

protection of the engine taking into account severe climatic and operating conditions in Europe and Asia.

Modern technologies of manufacturing these lubricants also offer economic benefits, such as: lower repair and

maintenance costs, longer life of the motor oil and compliance with environmental standards that become increasingly

stricter every year.

REQuiREMENT CoMPLiANCEACEA E9-08; Caterpillar CAT ECF-3, SAE 10W-30: ACEA E9-08, API CJ-4, M 3575, Volvo VDS-4, MB-Approval 228.31, Mack EO-O Premium Plus, Renault VI RLD-3SAE 15W-40: ACEA E9-08, CAT ECF-3.

LukoiL AVANTGARDE LukoiL AVANTGARDEPROFESSIONAL LA SAE 5W-40, 10W-30, 15W-40 API CJ-4 PROFESSIONAL LS SAE 5W-30, 10W-40 API CI-4

APPRoVALS & LiCENCES

APPLiCATioN

SAE 10W-30: Cummins CES 20081SAE 15W-40: Volvo VDS-4, Mack EO-O Premium Plus,Renault RLD-3, MB-Approval 228.31, Cummins CES 20081 API CJ-4 (SAE 15W-40).


API CI-4; MB-Approval 228.51; MAN M3477/M3271-1; Volvo VDS-3/CNG; Renault RLD/ RLD-2/ RGD;Mack EO-N/EO-M Plus; Deutz DQCIV-10LA

REQuiREMENT CoMPLiANCE

ACEA E4/E6/E7-08; JASO DH-2

LUKOIL AVANTGARDE PROFESSIONAL LA is recom-mended for lubrication of the latest generation Diesel en-gines that meet the Euro 3, Euro 4 and Euro 5 emission standards and fully comply with the requirements of ACEA E9-08 and those of the leading engine manufacturers.

APPLiCATioN

LUKOIL AVANTGARDE PROFESSIONAL LA is suitable for the latest generation Diesel engines that meet the Euro 3, Euro 4 and Euro 5 emission standards and fully comply with the requirements of the leading engine manufacturers.

LukoiL AVANTGARDE PRoFESSioNAL LA is a fully synthetic motor oil obtained from synthetic base oils and high performance additives. It is intended for use in modern high-speed Diesel engines of trucks and buses,including turbocharged ones, equipped with Dieselparticulate filters (DPF), exhaust gas recirculation (EGR)systems and NOx selective catalytic reduction systems(SCR NOx).

LukoiL AVANTGARDE PRoFESSioNAL LS is afully synthetic “Low SAPS” motor oil, with low sulphated ash, phosphorus and sulphur content.

It is intended for use in latest generation Diesel engines with severe operating conditions that use low sulphur Diesel fuel; it is recommended for lubrication of engines with or without Diesel particulate filters (DPF), with exhaust gas recirculation (EGR) systems and NOx selective catalytic reduction systems (SCR NOx).

ADVANTAGES ADVANTAGES

• Ensuresextendedoildrain intervalsdefinedby theengine manufacturer;• Protectionofemissioncontrolsystems;• Lowerexhaustemissions;• Preventsdepositbuild-upundersevereoperatingconditions (high temperatures);• Fueleconomy.

• Ensures extended oil drain intervals defined by theengine manufacturer;• Reliableprotectionagainstwearandcorrosion;• Lowermaintenanceandservicecosts;• Preventsdepositbuild-upundersevereoperatingcon-ditions (high temperatures);• Fueleconomy;• Lowerexhaustemissions

LUKOIL AVANTGARDEPROFESSIONAL LA



ACEA Limit

ACEA Limit

ACEA Limit

Three times increase of cam protection(test performed on Mercedes-Benz engine)

2.5-times cleaner pistons (test performed on Mercedes-Benz engine)

Two times lower motor oil consumption (test performed on Mercedes-Benz engine)

1601208040

0

40302010

0

1086420

155

17

9

50

41

5

LUKOIL AVANTGARDEPROFESSIONAL LS

ACEA Limit


1086420

9

4

The test measures cam wear level; the lower the indicator valuecompared to the limit imposed by ACEA, the better the oil behavior.

μm

Merit notes for clean pistons based on test performed onMercedes-Benz engine show impeccably clean pistons ifcompared to the minimum level as per ACEA E7 norm.

The oil consumption (kg/test) recorded on a Mercedes-Benzengine is at least 50% lower than the one set by ACEA E4/E6 norms for a standard oil of this performance level.

3 times less wear

2.5-times cleaner pistons


ACEA Limit

Two-times cleaner pistons (test performed on Mercedes-Benz engine)

40302010

0

17

372-times cleaner pistons

Merit notes for clean pistons based on test performed on a Mercedes-Benz engine show impeccably clean pistons if compared to the minimum level as per ACEA E7 norms.


ACEA Limit

2-times increase of cam protection(test performed on Mercedes-Benz engine)160

1208040

0

155*78

The oil ensures very good performance in terms of neutralization and dispersion of acidic compounds resulted during the engine run, passivizes oxidation reactions, protects metallic parts preventing their wear.

μm

de 2 times less wear

Exhaust camshaft average wear test results (μm) performed on a Mercedes-Benz engine show a 2-times increase of protection in comparison with maximum allowed average values under ACEA specifications.*according to ACEA E4/E6 = max. 140 (max. 155 for ACEA E7)

LUKOIL AVANTGARDEULTRA

API Limit

Viscosity increase, 40oC, %

9080706050

90

47

LUKOIL AVANTGARDE PROFESSIONAL LS is a very stable oil that maintains its properties under the most severe engine operating conditions.Based on the API CI-4, Sequence III-F engine tests, the test values show an exceptional stability for this oil (at least twice as stable as a standard oil of the same performance level).

μm

2 times lower!!!

LUKOIL AVANTGARDE PROFESSIONAL LA ensures a two times decrease in oil consumption as compared to the sameperformance level oils (ACEA E9).

LukoiL AVANTGARDEPROFESSIONAL SAE 5W-30 API CI-4, 10W-40 API CF

APPRoVALS & LiCENCES SAE 5W-30 APi Ci-4

APPRoVALS & LiCENCES SAE 10W-40 APi CF

SAE 5W-30 APi Ci-4 MEETS REQuiREMENTS

SAE 10W-40 APi CF MEETS REQuiREMENTS

API CI-4; MB-Approval 228.5; MAN M3277; MTUCategory 3; Volvo VDS-3; Renault RLD-2; Mack EO-N/EO-M Plus; DeutzDQC IV-10.

MB-Approval 228.5; MAN M3277; MTU Category 3; Volvo VDS-3; Renault RLD-2/RXD; Mack EO-N; Deutz DQC III-10; Scania LDF-3; MTU Category 3.

ACEA E4/E7-08; ZF TE-ML 04C

API CF; ACEA E4/E7; Cummins CES 20072; DAF Extended Drain; ZF TE-ML 04C.

APPLiCATioN

LUKOIL AVANTGARDE PROFESSIONAL is recommended for lubrication of the latest generation Diesel engines that meet the Euro 3, Euro 4 and Euro 5 emission standards and fully comply with the requirements of the leading engine manufacturers.

LukoiL AVANTGARDE PRoFESSioNAL is a fullysynthetic motor oil obtained from synthetic base oils and high performance additives. It is intended for use in the latest generation four-strokeDiesel engines with severe operating conditions (heavy trucks and buses) equipped with exhaust gas recirculation (EGR) systems and NOx selective catalytic reduction systems (SCR NOx) and without Diesel particulate filters (DPF).

ADVANTAGES

• Optimalprotectionagainstwearandcorrosion;• Ensures extended oil drain intervals defined by theengine manufacturer;• Preventsdepositbuild-upundersevereoperatingconditions (low/high temperatures);• Lowerexhaustemissions;.

LukoiL AVANTGARDEPROFESSIONAL M5 10W-40 API CI-4


MAN M3277; MTU Cat. 3.


ACEA E4-08; MB-Approval 228.5, Volvo VDS-3; Renault VI RLD-2; Mack EO-N.

APPLiCATioN

LUKOIL AVANTGARDE PROFESSIONAL M5 10W-40 is recommended for lubrication of Diesel engines that meet the Euro 3, Euro 4 and Euro 5 emission standards and fully comply with the requirements of MAN, Mercedes-Benz and MTU engine manufacturers.

LukoiL AVANTGARDE PRoFESSioNAL M5is a fully synthetic motor oil obtained from synthetic base oils and high performance additives. It is intended for use in Diesel engines without Dieselparticulate filters (DPF) with severe operating conditions and most engines equipped with exhaust gas recirculation (EGR) systems and NOx selective catalytic reduction systems (SCR NOx).

ADVANTAGES

• Optimalprotectionagainstwearandcorrosion;• Ensures extended oil drain intervals defined by theengine manufacturer;• Preventsdepositbuild-upundersevereoperatingconditions (low/high temperatures);• Lowerexhaustemissions;

LUKOIL AVANTGARDEPROFESSIONAL

ACEA Limit

Five times increase of cam protection(test performed on Mercedes-Benz engine)

1601208040

0

155

28

The oil ensures exceptional performance in terms of neutralizationand dispersion of acidic compounds resulted during the engine run,passivizes oxidation reactions, protects metallic parts preventing their wear.

Exhaust camshaft average wear test results (μm) performed on a Mercedes-Benz engine show a five times increase of protection in comparison with maximum allowed average values under ACEA specifications.

μm

5 times less wear


ACEA Limit

1.7 times cleaner pistons (test performed on Mercedes-Benz engine)

40302010

0

25

43,4

Merit notes for clean pistons based on test performed on a Mer-cedes-Benz engine show impeccably clean pistons if compared to the minimum level as per ACEA E7 norms.

1.7 times cleaner pistons


ACEA Limit


1086420

9

4

The oil consumption (kg/test) recorded on a Mercedes-Benz engine is at least 50% lower than the one set by ACEA norms for a standard oil of this performance level.

The oil consumption (g/hour) recorded on a Caterpillar engine is 30%lower than the one set by API CI-4 norms for a standard oil of this perfor-mance level.

LUKOIL AVANTGARDEPROFESSIONAL M5

API Limit

1.15-times cleaner engine(Cummins test)

9,08,58,07,57,0

7,8

9

The oil ensures neutralization and dispersion of acidic compounds resulted during the engine run, passivizes oxidation reactions, protects metallic parts and prevents clogging of lubrication system components.

Evaluation of sludge deposits according to API CI-4 requirements (test performed on Cummins M11-EGR engine) shows a low level of sludge deposits (about 15% lower than the limit defined by API CI-4 specification).

μm

15-time cleaner engine

LUKOIL AVANTGARDEPROFESSIONAL M5

API Limit

1.4-times lower motor oil consumption (test performed on Caterpillar engine)

13,1

9,2

15129630

LukoiL AVANTGARDEULTRA SAE 5W-40, 10W-40, 15W-40, 20W-50 API CI-4/SL



APPLiCATioN

API CI-4/SL; SAE 15W-40: MB-Approval228.3;Cummins CES 20078; MAN 3275-1;MTU Cat. 2; KA-MAZ;YaMZ; Renault Trucks RLD-2; Volvo VDS-3;Mack EO-N; Deutz DQC III-10.

ACEA E7-08, A3/B4-04;SAE 10W-40: Cummins CES 2007/2/6/7/8;MB-Approval 228.3, MAN 3275-1; Volvo VDS-3;Renault Trucks RLD-2/RLD; MTU Cat. 2; Mack EO-M Plus; CAT ECF-1-a/ECF-2; Global DHD-1;SAE 15W-40: Cummins CES 20071/2/6/7; Mack EO-M Plus; CAT ECF-1-a/ECF-2 ; ZF TE-ML 04 ,07C ;Global DHD-1.SAE 20W-50: MB-Approval 228.3; MAN M3275-1; MTU Cat.2.

LUKOIL AVANTGARDE ULTRA oils are recommended forlubrication of the latest generation Diesel engines that meet the Euro 3, Euro 4 and Euro 5 emission standards and fully comply with the requirements of the leading engine manufacturers.

LukoiL AVANTGARDE uLTRA line oils are synthetic (5W-40 and 10W-40) and mineral (15W-40 and 20W-50) motor oils suitable for year-round use.

LUKOIL AVANTGARDE ULTRA API CI-4/SL oils arerecommended for use in four-stroke Diesel engines withsevere operating conditions. They are intended for use inengines without Diesel particulate filters (DPF) and in most modern engines with exhaust gas recirculation (EGR)systems and NOx selective catalytic reduction systems (SCR NOx).

LukoiL AVANTGARDEEXTRA SAE 10W-40; 15W-40 API CH-4/CG-4/SJ



API CH-4/SJ (SAE 15W-40); KAMAZ;YaMZ;SAE 15W-40: Cummins CES20077; MAN M3275-1;MTU Cat. 2; Deutz DQCII-10; Volvo VDS-3;Renault VI RLD-2; Mack EO-N; MB-Approval 228.3

ACEA E7-08, A3/B4-04; Cummins CES 20071/2; VDS/VDS-2; Mack EO-M Plus; Caterpillar ECF-1-a (SAE 15W-40).

APPLiCATioN

LUKOIL AVANTGARDE EXTRA oils meet the Euro 3 emis-sion standards; they are recommended for a wide range ofmodern Diesel engines manufactured in Europe, U.S.A. and Japan that operate under various conditions, both on and off road, in accordance with the leading engine manufacturers’ recommendations.

LUKOIL AVANTGARDE EXTRA line oils are synthetic (SAE 10W-40) and mineral (SAE 15W-40) motor oilsrecommended for year-round use.These oils are intended for use in four-stroke turbocharged Diesel and gasoline engines of heavy trucks with severe operating conditions and Diesel engines of passenger cars, vans, commercial vehicles and light trucks.

ADVANTAGES

• Reliableprotectionagainstwearandcorrosion;• Ensures antioxidant and dispersant properties, thuspreventing deposit build-up under severe operatingconditions (high temperatures) and extending the engine life;• Fueleconomy;•Lowerexhaustemissions;


API Limit

Viscosity increase, 40oC, %

300250200150100

275

116

LUKOIL AVANTGARDE ULTRA is a very stable oil that maintains its properties under the most severe engine operating conditions.Based on the API CI-4, Sequence III-F engine tests, the test values show an exceptional stability for this oil (at least twice as stable as a standard oil of the same performance level).

μm

2.4 times lower!!!


ACEA Limit


40302010

0

1723

The oil ensures neutralization and dispersion of acidic compounds resulted during the engine run, passivizes oxidation reactions, protects metallic parts preventing their wear.Merit notes for clean pistons based on test performed on a Mercedes-Benz engine show impeccably clean pistons if compared to the minimum level as per ACEA E7 norms.

1.4-time cleaner pistons


API Limit

1.8-times lower motor oil consumption (test performed on Caterpillar engine)

15129630

13,1

7,4

The oil consumption (g/hour) recorded on a Caterpillar engine is half the value set by API CI-4 norms for a standard oil of this performance level.

LUKOIL AVANTGARDEEXTRA

ACEA Limit

1.3-times increase of cam protection(test performed on Mercedes-Benz engine)

1601208040

0

155119

The oil ensures neutralization and dispersion of acidic compounds resulted during the engine run, passivizes oxidation reactions andprotects metallic parts preventing their wear.

μm1.3 times less wear

Exhaust camshaft average wear test results (μm) performed on a Mercedes-Benz engine show a 1.3-times increase of protection in comparison with maximum allowed average values under ACEA specifications.


ACEA Limit


40302010

0

1730

1.7-times cleaner pistons

Merit notes for clean pistons based on test performed on aMercedes-Benz engine show impeccably clean pistons ifcompared to the minimum level as per ACEA E7 norms.


ACEA Limit

Three times lower motor oil consumption (test performed on Mercedes-Benz engine)

1086420

9

3

The oil consumption (kg/test) recorded on a Mercedes-Benz engine is at least 60% lower than the value set by ACEA norms for a standard oil of this performance level.

• Reliableprotectionagainstwearandcorrosion;• Easyenginestartatlowtemperatures;• Preventsdepositbuild-upundersevereoperatingconditions (high temperatures);• Fueleconomy;• Ensuresextendedoildrain intervalsdefinedby theengine manufacturer;• Lowermaintenanceandservicecosts;

ADVANTAGES

LukoiL AVANTGARDESAE 10W-40, 15W-40, 20W-50 API CF-4/SG


APPLiCATioN

KAMAZ (SAE 10W-40, SAE 15W-40)

LUKOIL AVANTGARDE API CF-4/SG oils are recommended for vehicle fleets with Diesel engines or mixed fleets of road vehicles with Diesel or gasoline engines.

Lukoil Avantgarde APi CF-4/SG line oils are synthetic (SAE 10W-40) and mineral (SAE 15W-40, SAE 20W-50) motor oils suitable or year-round use.

Lukoil Avantgarde API CF-4/SG oils are recommended for use in high-speed Diesel naturally aspirated or turbo-super-charged engines with severe operating conditions. They are intended for use in both four-stroke Diesel engines of trucks and passenger cars and gasoline engines without turbo-charger.

ADVANTAGES

• Preventsdepositbuild-upundersevereoperatingconditions (high/low temperatures);• Fueleconomy;• Lowermaintenanceandservicecosts;• Extendeddrainintervalsdefinedbytheenginemanufacturer.

LukoiL AVANTGARDEUSAGE GUIDE

Name

LUKOIL AVANTGARDEPROFESSIONAL LASAE 5W-40

LUKOIL AVANTGARDEPROFESSIONAL LSSAE 5W-30

LUKOIL AVANTGARDEPROFESSIONALSAE 5W-30

LUKOIL AVANTGARDEULTRASAE 5W-40

LUKOIL AVANTGARDEM5SAE 10W-40

LUKOIL AVANTGARDEEXTRASAE 10W-40

LUKOIL AVANTGARDESAE 10W-40




LUKOIL AVANTGARDEPROFESSIONAL LSSAE 10W-40

LUKOIL AVANTGARDEPROFESSIONALSAE 10W-40





LUKOIL AVANTGARDEPROFESSIONAL LASAE 15W-40

Fully synthetic

Synthetic

Synthetic

Synthetic

Mineral

Mineral /

/Mineral

Mineral

Synthetic

Mineral

Mineral

Mineral /

3,4,5

3,4,5

3,4,5

3,4,5

3,4,5

3,4

3

3,4,5

3,4

3

3,4,5

3,4,5

3,4,5

3,4,5

3,4

3

3,4,5

Base oilSevere operating

conditions\climate

Extended drain interval

Fuel economy

Euro class Engine type

TURBO

TURBO

EGR

TURBO

TURBO

EGR

EGR

TURBO

TURBO

DPF

DPF

SCR

EGR

EGR

SCR

SCR

SCR

SCR

EGR

EGR

Fully synthetic

Fully synthetic

Fully synthetic

Fully synthetic

Fully synthetic

LukoiL LuBRiCANTS EAST EuRoPE

11 – 15, Tipografilor str., S-Park, A2013714 Sector 1, Bucharest, Romania

office-lukoil-lubricants@romania.lukoil.comwww.lukoil-lubricants.ro

brosura-avantgarde_eng

Documents

lukoil avantgarde motor

lukoil lubricants east

competitors product

modern lubricants

oil formulation

high performance level

oil alkalinity

engine components