bringing component parts together - concentric … component parts together. ... (1000 lb. dynamic...
TRANSCRIPT
About Concentric InternationalConcentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products in agricultural, construction, general industry, lawn and garden, professional turf and utility equipment.
Founded in 1983 by John Ruan in Des Moines, Iowa, our staff includes salespeople, engineers, logistics specialists, and technicians, who specialize in our range of products. With our full-service warehouses, centrally located in Des Moines, products can be shipped efficiently to any destination.
Concentric International serves as a single-point-of-contact for our customers. We remove all the barriers and potential headaches from global sourcing. We often integrate fully into our customers’ manufacturing and supply networks, creating exceptional visibility and a seamless flow of products and parts. We also partner with customers to overcome their challenges, including continuous product improvement as well as new product engineering, design, development and production.
Concentric International512 Tuttle StreetDes Moines, Iowa 50309
Toll Free: 800.831.4145Phone: 515.283.3900Fax: 515.283.3901www.concentricintl.com
Copyright ©2015. All Rights Reserved1
INDEX
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM 2
INDEXLinear Actuators
Light DutyIndustrial Duty
ACCESSORIESRelaysVERSA Controls
Rocker SwitchesToggle Switches
5
6
77
8
9
99
Position Controllers
Extension CablesMounting Brackets
8
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM 4
Linear Actuators & Related Components
Concentric International’s GLIDEFORCE Linear Actuators are powerful and portable 12V and 24V driven linear motion. They are designed and manufactured to ISO 9001:2008 standards. This certification ensures a product that is ideal for a variety of diverse applications in the agricultural, automotive, construction, industrial, marine, power generation, racing, turf and utility vehicle segments. Comprehensive and versatile, our light duty and industrial duty series combine smooth operation w/ superior performance and reliable power. Custom design and rapid prototyping capabilities are available to tailor our products to virtually any OEM requirement. When it comes to load, speed, stroke and water resistance, we’ve got your unique application covered!
Transform your project with Concentric International’s linear actuators!
For more information about our OEM, wholesale, retail, or hobbyist line of EPG, please call at 800.831.4145 or email at [email protected].
Industrial Duty Light Duty
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM5
INDUSTRIAL SERIES LINEAR ACTUATORSOur Industrial Series linear actuators are offered in six stroke lengths from 4” to 24” (nominal), they come in two versions:
ACME screw (500 lb. dynamic load rating, 1000 lb. static) and ball screw (1000 lb. dynamic load rating, 3000 lb. static). All
ID series linear actuators can come standard with thermal overload protection, and a torque limiter for overload protection.
*Specs subject to change with the addition of potentiometer and/or limit switches.
BALLSCREW DRIVEPart# Nominal
StrokeActual Stroke
LACT4-1000BLACT6-1000BLACT8-1000BLACT12-1000BLACT18-1000BLACT24-1000B
4.00”6.00”8.00”
12.00”18.00”24.00”
3.31”5.31”7.32”11.34”17.99”24.02”
12.05”14.06”16.06”20.08”29.02”35.04”
15.35”19.37”23.39”31.42”47.01”59.06”
Retracted Extended
ACME DRIVEPart# Nominal
StrokeActual Stroke Retracted Extended
LACT4-500ALACT6-500ALACT8-500ALACT12-500ALACT18-500ALACT24-500A
4.00”6.00”8.00”12.0018.00”24.00”
4.01”6.02”8.03”12.04”18.07”24.09”
10.24”12.24”14.25”18.26”27.20”33.23”
14.25”18.26”22.28”30.03”45.28”57.32”
Retracted Extended
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM 6
LIGHT DUTY LINEAR ACTUATORSOur LD Series linear actuators are ideally suited for many industrial, agricultural, automotive and off-highway applications.
Offered in six stroke lengths from 2” - 12” (nominal), they have a 110 Lb dynamic load rating (with Std 20:1 gear ratio), and
a 500 Lb static load rating. All aluminum construction with metal drive gears ensure tremendous durability and reliability. All
LD Series linear actuators come standard with non-adjustable limit switches to safely stop the drive motor at each end of
stroke.
*Specs subject to change with the addition of potentiometer and/or limit switches.
ACME DRIVEPart# Nominal
StrokeActual Stroke
LACT2-110ALACT4-110ALACT6-110ALACT8-110ALACT10-110ALACT12-110A
2.00”4.00”6.00”8.00”10.00”12.00”
1.97”3.94”5.91”7.87”9.84”
11.81”
Retracted Extended
6.22”8.23”10.24”12.24”14.25”16.26”
8.19”12.17”16.14”20.12”24.09”28.07”
Retracted Extended
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM7
HIGH CURRENT RELAYSReversing polarity contactor. Ideal for controlling permanent magnet motors. Both output terminals rest at ground for dynamic braking in de-energized state. Will handle 100 AMP loads and a 25% duty rating. Splash resistant body with O-ring seals. Silver-plated contacts.
Relay-100-12V
Contact Type: DPDTMaximum Current: 100AInrush Current: 200AMaximum Switching Voltage: 12VLife Cycle: 10,000 CyclesDuty Cycle Percentage: 25%Maximum On Time: 15 MinutesThermal Operation: 145°CPull in Voltage: 10.3VDrop out Voltage: 6.0VCoil Resistance: 7.1 - 8.9 Ohms (before use)Contact Material Type: Silver AlloyMaximum Operation Time: 10ms or less at rated voltageRelease Time: 10ms or less at rated voltageMin. Operating Voltage and Current: 10.3V 5AInrush Current: 200A
Relay-100-24V
Contact Type: DPDTMaximum Current: 100AInrush Current: 200AMaximum Switching Voltage: 24VLife Cycle: 10,000 CyclesDuty Cycle Percentage: 25%Maximum On Time: 15 MinutesThermal Operation: 145°CPull in Voltage: 10.3VDrop out Voltage: 6.0VCoil Resistance: 7.1 - 8.9 Ohms (before use)Contact Material Type: Silver AlloyMaximum Operation Time: 10ms or less at rated voltageRelease Time: 10ms or less at rated voltageMin. Operating Voltage and Current: 10.3V 5A
VERSA CONTROLSVERSA2 features a simple way to control linear actuators with a DC motor power supply, all withina 150’ line-of-sight range and completely waterproof receiver. It features a simple two buttonoperation (with two keychain transmitters), one button for one polarity and the other button toreverse polarity.
VERSA7 features a 7 Channel wireless remote control receiver/transmitter combination. It can beoperated from 12 Volt DC power supply or battery. It only draws .15 amps, and the receiver has 14”antenna with a 100 foot range with a clear line of sight. It includes two keychain style 4-pushbuttontransmitters and full instructions with application examples.
VERSA2Power Supply: 12 VDCStandby Current: 7 mAOperating Current: 137 mALead Length: 13”Lead Wire Gauge:1 4 AWGRF Section: 433 Mhz SAWRange: 150’ [Unrestricted]Transmitter: 2 ButtonTransmitter Pairing: Up to 4Maximum Output Load: 40 AmpsOutput Voltage: 12 VDC [Polarity Reversing]Output Switching: Relay, Momentary ContactMounting Hole Size: 3/16”Mounting Hole Spacing: 3.50”Receiver Dimensions: 3 3/16” L x 2 3/4” W x 1 5/8” DIP Rating/Receiver: IP67 [Waterproof]IP Rating/Transmitter: Not Waterproof
VERSA7Power Supply: 12 VDCChannel 1-2 Output: RelayLead Length: VariableLead Wire Gauge: VariableRelay Contacts Rating: 30 Amp maxRelays: SPDT (common N.O. connection)Channels 3-7 Output: 500 m.a.Mounting: Two hole, 3-7/8” c/cTransmitter: 4 ButtonTransmitter Pairing: Up to 4Output Voltage: 12 VDC [Polarity Reversing]Output Switching: Relay, Momentary ContactMounting Hole Size: 3/32”Mounting Hole Spacing: 3-7/8”Receiver Dimensions: 4-1/8” x 4” x 1-1/4”IP Rating/Receiver: Not WaterproofIP Rating/Transmitter: Not Waterproof
VERSA2
VERSA7
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM 8
ROCKER SWITCHES
Relay-100-12VRelay-100-24VMaintained Contact-12VDC- 30 AMP
Momentary Contact-12VDC-30 AMP
Momentary Contact-12VDC-20 AMP
Product: SWT-ROC-4W
12 VDC, 30 amp, On-Off-On Rocker Switch comes with built-in jumper bars for polarity reversing. Simply connect power, ground, and two DC motor leads and the switch will reverse the motor direction. This heavy-duty switch mounts in a 0.83 x 1.48 inch hole and it has 1/4 quick connect terminals. Internal gasket keeps water & dust out of contacts.
Product: SWT-ROC-MOM-4W
12 VDC, 30 amp, On-Off-On Rocker Switch comes with built-in jumper bars for polarity reversing. Simply connect power, ground, and two DC motor leads and the switch will reverse the motor direction. This heavy-duty switch mounts in a 0.83 x 1.48 inch hole and it has 1/4 quick connect terminals. Internal gasket keeps water & dust out of contacts.
Product: SWT-ROC-MOM-5W
12 VDC, 20 amp, On-Off-On Rocker Switch is commonly used for power windows, power door locks, and other DC motor control applications. This is a polarity motor reversing 5 wire rocker switch and features a green LED incorporated for back lighting. The switch snaps into a panel cutout measuring .72” x 1.54”. Terminals are 0.25” quick connect terminals.
TOGGLE SWITCHES
Relay-100-12VMaintained Contact-12VDC- 30 AMP Momentary Contact-12VDC-30 AMP
Product: SWT-TOG-4W
12 VDC, 30 amp, On-Off-On Toggle Switch comes with built-in jumper bars for polarity reversing. Simply connect power, ground, and two DC motor leads and the switch will reverse the motor direction. This heavy duty switch mounts in a .48 diameter hole and it has 1/4 quick connect terminals. Internal gasket keeps water & dust out of contacts.
Product: SWT-TOG-MOM-4W
12 VDC, 30 amp, On-Off-On Toggle Switch comes with built-in jumper bars for polarity reversing. Simply connect power, ground, and two DC motor leads and the switch will reverse the motor direction. This heavy duty switch mounts in a .48 diameter hole and it has 1/4 quick connect terminals. Internal gasket keeps water & dust out of contacts.
ELECTRICAL PRODUCTS GROUP
For Complete Specifications And Specific Applications See WWW.CONCENTRICINTL.COM9
POSITION CONTROLLERThe Linear Actuator Controller unit features 3 user programmable presets that are easily accessed via the push-button display to precisely control one or two linear actuators.
The position is programmed by the main control unit and visually indicated by a flashing LED above the preset.
One Actuator-12VDC
Product Code: LA-CONTROLLERVoltage: 12VDCRecommended Fuse: 15 AmpProgrammable Positions: 3Remote Inputs: 3
Two Actuators-12VDC
Product Code: LA-DUAL-CONTROLVoltage: 12VDCRecommended Fuse: 15 AmpProgrammable Positions: 3Remote Inputs: 3
EXTENSION CABLE10 Foot linear actuator extension cable. This cable is designed to be used with the LD model linear actuators, and the linear actuator controllers, both single and dual units. The extension cable can be utilized to increase the mounting distance from the controllers, and the linear actuators.
10 foot
Product Code: LA-EXTHARNAWG: 20Conductors: 5
MOUNTING BRACKETS
Relay-100-12VIndustrial Duty Linear ActuatorsLight Duty Linear Actuators
Product Code: LA-IDBRACKET
Material: Aluminum Alloy 6061-T6. Includes hardware kit.
Linear Actuator Mounting Bracket For ID Actuators (2 needed per Linear Actuator)
These linear actuator mounting brackets are billet machined from solid aluminum to provide the greatest strength possible while remaining a great looking piece. The brackets are a satin finish, but can be polished to a bright shine.
Product Code: LA-LDBRACKET
Material: Aluminum Alloy 6061-T6. Includes hardware kit.
Linear Actuator Mounting Bracket For LD Actuators (2 needed per Linear Actuator)
These linear actuator mounting brackets are billet machined from solid aluminum to provide the greatest strength possible while remaining a great looking piece. The brackets are a satin finish, but can be polished to a bright shine.