brief profile sanjeev kadam - 2016

Brief Profile

of 10

Application for the Post of: -

DESIGN ENGINEER (CIVIL/STRUCTURAL

ENGG.)

Sanjiv Annappa Kadam

PRESENT ADDRESS: Block#1, Street#1,

Building#29, Abu Halifa, State of Kuwait

PHONE # 965-23714822/55209271/94132925

E-MAIL:

1) [email protected]

2) [email protected]

Profiles:

Over 20 years professional experiences in Civil / Structural/Architectural Engineering related to

Refineries & Petrochemicals plant, Oil and Gas industries, and Industrial & Commercial field.

During this period preformed detailed analysis and design of conventional low rise and high-rise on

shore and off shore reinforced cement concrete and structural steel structures. Involved in developing

feed , basic and detail working design and drawings, detail review, approval and monitor of EPC

contractor , Consultants engineering Design, drawings and documents, review of feasibility study

report, vendor document, sub-contractor drawings and designs related to civil/architectural, structural

engineering. Recommendation of appropriate and suitable solutions to resolve the civil, structural

engineering related field problems during project execution. Involved in approval cycles with EPC

contractor, consultant and client. Coordinating with consultants, contractors, sub-contractors and

other discipline engineer for the various issues pertaining to civil/architectural, structural engineering

design, and execution team of the project in the field. Guiding cad operators and construction

engineer.

Software:

STAAD PRO V8i SS6, MS Excel some in house made programs.

International Codes:

Reinforced Cement Concrete: ACI – 318, ACI 350-06, AWWA, IS456 2000

Structural Steel Structures: AISC ASD Ninth Edition, AISC LRFD, API 650, IS 800

Other Standards:

KNPC Engineering Standard, DEP Shell Standard, OSHA Standard for Scaffolding, UBC 97.

mailto:[email protected]

mailto:[email protected]

Brief Profile

of 10

Education:

M E Civil Structural

Engineering

Karnatak University,

Dharwar/ Gogte Institute of

Technology, Belgaum,

Karnataka, Republic of India

Feb 1996

B E Civil Engineering

-do-

July 1993

Career History:

OVERSEAS EMPLOYMENT:

Heavy Engineering Industries & Shipbuilding Co. (K.S.C) P.O.Box:21998 Safat 13080

State of KUWAIT. Tel 965 24835488

EPC & Oil Sector Secondment Employment Contracting Company.

Position: Currently working on Secondment Contract as a Civil Design Engineer,

With Kuwait National Petroleum Company (K.S.C), State of Kuwait.

A. Project Coordination (Group - F), Mina Al Abdullah Refinery, (June 2008

to Oct.2010), Kuwait National Petroleum Company (K.S.C), State of

Kuwait.

Project: Revamp Of Effluent Treatment Project (RETF).

B. Project Coordination (Group - G), Mina Shuaiba Refinery, (Oct.2010 to

Nov. 2012), Kuwait National Petroleum Company (K.S.C), State of

Kuwait.

Project:

i. Replacement/Installation of IRT Pipelines.

ii. Replacement of Old & Inadequate Flood Light Towers at Tankage &

Offsite Areas of Old Refinery –Mina Al Ahmadi Refinery.

iii. Additional Tanks & Loading Arms at Mina Al Ahmadi Depot

June 2008 till

date

Brief Profile

of 10

C. Construction & Site Preparation Group – Al-Zour Oil Refinery, (Nov

2012 - June 2015), Kuwait National Petroleum Company (K.S.C), State of

Kuwait.

Project :

i. WO#06 & 07 – Al-Zour Power Station Relocation of 1.50 Km

Security Wall & New Sub Station Bldgs.

ii. WO#61 – Demolition of 34” KOC pipeline.

iii. EPC#48: Ground Remediation & Site Preparation.

iv. EPC#46: Company Site Offices.

D. PDII - Project Coordination (Group - VI), Mina Al Abdullah Refinery,

(June 2015 to July 2016), Kuwait National Petroleum Company (K.S.C),

State of Kuwait.

Project :

i. Sulphur Handling Facilities Project – MAA

E. PDI - Project Coordination (Group - III), Mina Al Abdullah Refinery,

(July 2016 till date), Kuwait National Petroleum Company (K.S.C), State

of Kuwait.

Project :

i. Expansion & Revamping of Ahmadi Depot – LM

Job description:

Preformed detailed analysis and design of conventional low rise and high rise

Onshore and offshore reinforced cement concrete and structural steel structures.

Involved in developing feed doc/drg., basic and detail working design/drawing,

detail review and approval of EPC contractor / Consultant engineering Design,

drawings and documents, vendor document, sub-contractor drawings and designs,

material testing and evaluate result as per project Standards and specifications,

field/design change note related to civil/architectural/structural engineering.

Maintained and follow up of monthly, weekly and day-today progress to smash the

target schedule. Recommendation of appropriate and suitable solutions to resolve

the civil, structural engineering related field problems during project execution.

Involved in approval cycles with EPC contractor, consultant and client.

Coordinating with consultants, contractors, sub-contractors and other discipline

engineer for the various issues pertaining to civil/architectural, structural

engineering design, and execution team of the project in the field. Performed

detailed in house engineering work for permanent office building. Involved in

feasibility study of existing structure for its suitability for its modification, by

Brief Profile

of 10

recommending suitable field test and sample collected laboratory test, execution

strategy, and shutdown requirements. Assist in the review of Contractor’s Claims

for schedule extension and/or compensation to assure such claims are technically in

accordance with the terms of the Contract. Coordinate with Contract coordinator to

assure that the required technical submittals are obtained from contractors. Perform

verification of Contractor submittals for progress and milestones achievements

related to civil/architectural/structural engineering. Guiding cad operators and

construction engineer. Issuing of work permit for onshore and offshore

construction, carrying out site supervision, attending request for inspection on site

and yards, preparation of daily site report, measuring daily work progress,

coordination with engineers, supervisors, pmc, coordinator, consultants.

RCC Structures: RCC Cable trenches, Culverts, precast and cast in situ sleepers,

Duct banks, Pump foundation, Foundations for pre engineering building Like

temporary site office , permanent office , Street light poles, Flood light towers, car

Parking shelter, DG & Transformer foundation, Security Wall , Substation Bldg.

and Panel support foundation.

Process related structures like underground tanks, Ring beam foundation for

supporting Structural steel tanks, Clarifier, Bio treater basin, Sand Filter, Bio sludge

centrifuge building, Vessel foundation, Cooling tower.

Non-Process related building like substation, maintenance shelter with crane

facilities, Pump House, Operator shelter, Analyzer shelters, Satellite instrument

house, Control room, Loading gantry.

Structural Steel Structures: Equipment platforms, Panel Supporting frame, Mast

pole, Flood light towers, Pipe racks, Rain Water Gutter, Cable tray supporting

structure, Water tank placing frames, and Tank roof covers, GRP roof cover,

Temporary car parking shelter, Staircases, Street light poles, Access ladder with

cage and without cage, Chiller shed, Chemical dozing and Chemical storage shed

steel, road crossing bridge for process pipe lines, Equipment and Panel Shelter,

Scaffoldings.

Al-Meer Technical SERVICES Company WLL P.O.Box:9240 Ahmadi61003

State of KUWAIT. Tel 965 2398 6594

Civil Design Engineer, with an EPC Contractor.

Project: Modernization of Obsolete Instrumentation Project (MOIP – Phase I),

Kuwait National Petroleum Company (K.S.C),

At Mina Al Ahmadi Refinery, State of Kuwait.

Job description:

Preformed detail analysis and design of conventional low rise and high rise

On shore and off shore reinforced cement concrete and structural steel structures.

March 2006 –

May 2008

Brief Profile

of 10

Involved In developing basic and detail working drawing, review of vendor

document, sub contactor Drawings and designs. Recommendation of appropriate

and suitable solutions to resolve the Civil, structural engineering related field

problems during project execution .Involved in Approval cycles with consultants

and clients. Guiding cad operators and construction Engineer. Involved in

preparation of ITB documents/specifications, Basic Engineering Package, BOQ,

Site changes and as-built drawings and review of Technical Bid Evaluation,

Preparation of technical repair procedure and recommendation, related to

Civil/architectural, Structural engineering. Involved in approval cycles with

Consultants and clients. Visiting Batching Plants prior to approval as a Supplier.

Inspect and approve the concrete trial mix, rebar test, Slump test, cube crush test.

Coordinating and monitoring the Work permit for different Activities. Guiding cad

Operators and construction Engineer.

Conventional Structures:

RCC Structures: RCC Cable trenches, Duct banks, Foundations for pre engineering

building Like temporary site office, Street light poles, car-parking shelter, Satellite

instrument house, analyzer shelters, Panel support foundation, Control Rooms.

Structural Steel Structures: Off shore berth operator rooms, Equipment platforms,

Panel Supporting frame, Mast pole, Cable tray supporting structure, Water tank

placing frames, Street light poles, Temporary car parking shelter, Staircases, Access

ladder with cage and without cage.

Non-Conventional Structures:

Blast proof Control room is a low rise building is designed by ABS Consultants,

Houston’s,

Involved in mandatory studies such as Risk Assessment.They develop basic

engineering drawings and detail working drawing is prepared by an Engineering

Consultant Al Habishi, State of Kuwait.

Performed the role of coordination and review. Involved in approval cycles with

consultants And clients.

Al-Meer Industries Amghara State of KUWAIT

Structural Steel Fabrication Company

Structural Steel Structures: Street Light Poles (for KOC, KNPC, Equate and US

Brief Profile

of 10

Army), Mast Lighting Frame (for US Army), Scaffolding (for KOC, KNPC, Equate

and US Army),Mezzanine Floor (for US Army), Cable Tray, Galvanizing Plant

with Crane facilities (For Almeer Industries), Dust transport gallery (For Kuwait

Cement Company).

Specialist Oilfield Services KSC,

POB 25495, Safat 13115, State of Kuwait Tel 965 2398 3638

Design Engineer

Job description: Preformed detail analysis and design of conventional low rise and

High-rise on shore structural steel structures. Involved in developing basic and

detail Working drawing .Involved in approval cycles with consultants and clients.

Guiding Cad operators and construction engineer.

Structural Steel Structures: Equipment platforms, Walk ways, Cat ways, Staircases,

Access ladder with cage and without cage, Car parking shelter, Diesel fuel tank as

per API 650.

Clients: MEW, KOC, KNPC etc..,

June 2004 –

November

2005

HOME EMPLOYMENT:

Sterling Engineering Consultancy Services Private Limited,

Queens Mansion, Prescott Road Mumbai – 400 001,

Maharashtra, Republic of India

Design Engineer


High-rise on shore reinforced cement concrete and structural steel structures.

Involved in developing basic and detail working drawing. Involved in approval

Cycles with consultants and clients. Guiding Cad operators and construction

engineer.

RCC Structures: Residential, Commercial High rise building

(Basement + Ground + 35 Upper Floors), Underground structures such water tanks,

Multiplex, commercials building with RCC frame structure and PSC slab.

Structural Steel Structures: Factory Sheds with and without crane facilities.

April 2003 –

April 2004

Brief Profile

of 10

Dalal Mot MacDonald Engineering Consultancy Services Private Limited,

Thade Marg, Worli, Mumbai – 400 001, Maharashtra, Republic of India

Design Engineer (Civil)





engineer.

RCC Structures: Residential, Commercial High rise building, underground

structures Such water tanks, Culverts, Over Head Water tanks, Foundations for pre

engineering building, Security Shelter.


Aug 2002 –

March 2003

Intech Design (India) Private Limited,

A – 601, Bharav, Off Vera Desia Road, Andheri (West), Mumbai – 400 054

Maharashtra, Republic of India

Structural Design Engineer





engineer.

RCC Structures: Residential, Commercial High rise building, underground

structures

Such water tanks, Culverts, Foundations for pre engineering building, Security

Shelter.

Structural Steel Structures: Pipe Racks, Factory Sheds with and without crane

facilities.

Dec 2001 –

July 2002

Brief Profile

of 10

B. Mehtalia Consultants Private Limited,

807, Imperial Mahal, 3rd floor Khodadad Circle, Dadar T T, Mumbai – 400 014

Maharashtra, Republic Of India

Design Engineer





engineer.

RCC Structures: Residential, Commercial High rise building, Administration

building,

Underground structures such water tanks, Culverts, Security Shelter.

Structural Steel Structures: Pipe Racks, Factory Sheds with and without crane

facilities.

June 2000 –

Dec 2001

Vinay Behere Consulting Structural Engineer,

Plot No 9, Mrutunjay Nagar, Angol Road, Tilakwadi, Belgaum –590 006


Design Engineer




Cycles with clients. Guiding draughtsman’s and construction engineer.

RCC Structures: Residential, Commercial building, Underground structures such

water tanks.


Feb 1998 –

June 2000

Ashok Iron Works Limited Plant II,

Macche Industrial Estate, Belgaum –590 014


Engineer (Civil / Design)

Job description: Preformed detail analysis and design of conventional low rise

Jan 1997 –

Jan 1998

Brief Profile

of 10

On shore reinforced cement concrete and structural steel structures.

Involved in developing basic drawing. Involved in review and approval of basic

and Detail working drawing cycles with consultant. Guiding draughtsman’s and

construction engineer.

RCC Structures: Administration Building, Underground structures such water

tanks, culverts.

Structural Steel Structures: Storage Shed, Factory Sheds with and without crane

facilities.

Vinay Behere Consulting Structural Engineer,

Plot No 9, Mrutunjay Nagar, Angol Road, Tilakwadi, Belgaum –590 006


Design Engineer






water tanks.


Dec 1995 –

Jan 1997

R N Shetty Polytechnic,

Shivabasava Nagar, Belgaum –590 010

Karnataka, Republic Of India

Lecturer in Civil Engg Dept.

Job description: Handled subjects like Strength of Material,

Structural Analysis, Design of Reinforced Concrete Structures.

Aug 1995 –

Dec 1995

Innovative Design Engineer,

352/B, Nehru Road, Tilakwadi, Belgaum –590 006


Structural Engineer (Part Time)


On shore reinforced cement concrete and structural steel structures.

Jan 1995 –

June 1995

Brief Profile

of 10




water tanks.


Anand G Kulkarni Consulting Civil Engineer and Design Engineer

Kalpadhruva, Sraf Compound, Khanapur Road, Tilakwadi, Belgaum –590 006


Assistant Engineer


On shore reinforced cement concrete.

Involved in planning, drafting, estimation developing basic and detail

Working drawing. Involved in approval cycles with clients. Guiding draughtsman

and construction engineer.


water tanks.

May 1994 –

June 1995

Trinity Engineer & Consultants,

1049/B, Khanapur Road, Tilakwadi, Belgaum –590 006


Assistant Engineer


On shore reinforced cement concrete.

Involved in planning, drafting, estimation, labor billing, developing basic and

detail Working drawing. Involved in approval cycles with clients. Guiding

draughtsman And construction engineer.


water tanks.

Jan 1993 –

April 1994

brief profile sanjeev kadam - 2016

Documents