botary table for painting by reliable engineering services, thane
TRANSCRIPT
IMPROVING PRODUCTIVITY THROUGH CUSTOM BUILT MACHINES
92 B/6 Brindavan Society, Thane (W.) -- 400 601.
Mobile: +91 -- 8451818060 / 9987302154.
Email: [email protected]
RELIABLE ENGINEERING
SERVICES
*Engineering Consultants
*Design & Development of SPECIAL PURPOSE MACHINES
*Automation To Improve Productivity
*Jigs and Fixtures
*Hydraulic, Pneumatic & Ball Screw Operated Slide Units
*Precision Spindles
*Multi-Spindle Drilling, Tapping & Boring Units
*Rotary Tables
*Load Turning Device ( Crane Attachment)
*Rod Straightening Machine For Hardened Rods
*Unit Hydraulic Press
It is Multi-Spindle Rotary Index Table
Two Parts to be brazed can be held between center and
rotated along its axis
Loading – Pre Heating – Brazing – unloading can be done at
Separate Stations.
Low initial and maintenance cost
Reduces cycle time considerably
To be hanged to a Crane
With the help of sling or wire rope in the pulley work piece
can be rotated 360º without any jerk
Work piece can be stopped at any position
Capacity as per customer’s requirement (2,5,10 and 15 Tones)
Compact Design
Used on any Milling Machine
Designed and Manufactured as per customer requirement
Best Suited for Inner surface of Body
• Hardened Round Parts are rolled & Straightened within 0.1mm
• No Spring-back action
• Setting and Operation is very easy and can be performed by
unskilled operators
• Production rate is high; Around 5 pieces per Minute
• Two Spindle U drilling Machine
• Center distance can be adjusted easily
• Sturdy and robust Design to suit for U drilling of ø50mm Hole
• Special Purpose Drilling unit
• Used to Drill ø 22.5mm which is 22 mm from the Wall as
shown in picture
Drill ø 22.5mm
*Rugged Spindle with VFD
*Vertical Movement Of Spindle-Manually Adjustable
*Rapid & Feed movement of Spindle – Hydraulic
operated.
*Built in Hydraulic Power pack and Electrical
Control Panel
*Work station can be moved anywhere