boq food court

7/30/2019 BOQ Food Court

1/36

GENERAL SUMMARY

SECTIONSAMOUNT

(US$)

AMOUNT

(S$)

Carried from

Page

SECTION NO. 1 - PRELIMINARIES SR 1/3 -

SECTION NO. 2 - M&E INSTALLATIONS SR 2/2 -

SECTION NO. 3 - SEATINGS AREA SR 3/8 #REF!

SECTION NO. 4 - SUB TENANT KIOSKS AREA SR 4/6

SECTION NO. 5 - BACK OF HOUSE AND COMMON AREA SR 5/4

SECTION NO. 6 - PELMET AND COLUMNS SR 6/3

SECTION NO. 8 - SUPPLY OF LIGHT FIXTURES

SECTION NO. 9 - SUPPLY OF LOOSE FURNITURES SR 8/1 -

Note : Compulsory 10% VAT has not be included into the BOQ

TOTAL SUM CARRIED : #REF! -

Prepared by : Sebrina Tan, Kingsmen GS Page 1


2/36

167765240.xlsx.ms_office

Bill of Quantities

ITEM DESCRIPTION QTY UNIT RATE

Section NO. 1 PRELIMINARIES

GENERAL NOTES

A The Contractor shall refer to the "Preliminaries Specification" when

pricing this Schedule.

Note

B All variations and additional works shall not be adjusted for

Preliminaries and the Contractor shall make allowance in this

regard.

Note

PRELIMINARIES

1 Site Management, Site Survey, Supervision and Setting Out 1 Sum

2 Attendance on and Coordination with all Nominated and/or Direct/

Separate Contractors, Sub-Contractors and Suppliers

1 Sum

3 Insurance (CAR and Third Party Liability) 1 Sum

4 Hoarding - including all staged hoarding where necessary. 1 Sum

5 Dismantle of existing structures and removal of debris 1 Sum

6 Working Hours Limitation and Site Constraints 1 Sum

7 Permits, Fees and Charges (If applicable) 1 Sum

8 Safety equipment 1 Sum

9 Temporary Light, Power, Water and Facilities 1 Sum

10 Storage and Delivery for procurement items (If applicable) 1 Sum

11 Staging, scaffoldding, temporary railing 1 Sum

12 Site Security 1 Sum

13 Daily site cleaning during construction 1 Sum

14 Finished floor protection 1 Sum

15 Final Cleaning Sessions 1 Sum

16 Samples and Mock-up 1 Sum

17 Shop Drawings 1 Sum

18 As Build Drawings and Operation & Maintenance Manuals 1 Sum

20 Structural Calculation and Submission 1 Sum

21 Warranties and Guarantees 1 Sum

Carried to Collection :

SR1-Prelim Page 2


3/36


Bill of Quantities


SECTION NO. 1 PRELIMINARIES (CONT'D)

23 Maintenance Crew within DLP 1 Sum

24 Government and Building Permit Submission 1 Sum

25 Other Employer's and Landlord's Requirements 1 Sum


SR1-Prelim Page 3


4/36


Bill of Quantities


SCHEDULE NO. 1 PRELIMINARIES (CONT'D)

COLLECTION

Page: SR 1/1

Page: SR 1/2

Total Carried To GENERAL SUMMARY :

SR1-Prelim Page 4


5/36


AMOUNT (US$)

0

SR1-Prelim Page 5


6/36


AMOUNT (US$)

By others

0

SR1-Prelim Page 6


7/36


AMOUNT (US$)

0

0

0

SR1-Prelim Page 7


8/36


ITEMDESCRIPTION

QTY UNIT RATE AMOUNT (US$)

Section NO. 2 M&E INSTALLATIONS

GENERAL NOTES

A The Contractor shall refer to the M&E Specification

Documents and all relevant drawings for the full extent

of works and pricing of this Schedule.

Note

B The Contractor must refer to the Fit-Out Guide for any

Landlord's Approved/ Nominated Contractors for

carrying out below works, where appropriate. The

Contractor shall direct contract with these Landlord

Contractors as his own sub-contractors and fully

responsible for their works under this Contract. The

Contractor shall include and price all these works under

this Contract.

Note

C All other M&E sub-contractors shall be subject to thefinal approval by the Project Manager prior to

commencement of the Works.

Note

D Total sum build up for each individual system shall be

brought forward from Part 1 of Schedules under

Appendice section of the M&E Specification. The

Contractor shall also fill in Part 2 - Sectional Costs and

Part 3 - Schedule of Unit Rates.

Note

E The Contractor is required to complete the Schedule of

Delivery Period and Proposed Manufacturers for Major

Equipment/ Materials as attached in Part 4 of Schedules

under Appendice section of the M&E Specification.

Note

F Please note that Supply ONLY of all light fixtures toCeiling and BOH/ Stock/ Office areas shall be priced

under Schedule No. 6 - Supply of Light Fixtures.

Note

G Please note that Supply and Install of all light fixtures

and M&E Installations to External and Internal Shop

Front Faade System are carried out by others and not

forming part of this Contract.

Note

1 M&E INSTALLATIONS

1.1 Electrical Services Installations Sum

1.1.1 Take down and remove all existing installations that are

not required for the works. (If applicable)

lot

1.1.2 Supply and installation of L.V. distribution system from

landlord switch room to retail shop, including:

lot -

- 200 main distribution system.

- Trunking, cable tray, conduit and accessories for

- Main distribution MCCB board and MCCB units.

- Main cable from Landlord switch room to the shop:

a Switch 200A TPN pcs

b Main distribution board DB-M panel- MCCB 200A TPN pcs- MCCB 80A TPN pcs- MCCB 63A TPN pcs

- 6 way MCCB board & Accessories lot

c 4x120 sqmm 1/c PVC Cu Cable + E m

Bill of Quantities

SR2-M&E Installations Page 8


9/36


ITEMDESCRIPTION


Bill of Quantities

d Trunking 100x100x1.5 mm m

e Hanger, Support & Accessories lot

Carried to Collection : -

SCHEDULE NO. 2 M&E INSTALLATIONS (CONT'D)

Electrical Services Installations (cont'd)

1.1.3 Supply and installation of LV distribution system for lot -- Main distribution system.

- Trunking, cable tray, conduit and accessories for

- Main distribution MCCB board and MCCB units.

- Emergency cut-off power control system.

a Distribution board DB-1L panel- MCCB 80A TPN pcs

- MCB 10A SP pcs- Contactor 3P-16A pcs

- Timer 24h pcs

- Switch & Button lot- 16 way MCCB board & Accessories lot

b Distribution board DB-1P panel- MCCB 63A TPN pcs

- MCB 16A SP pcs- MCB 20A SP pcs- RCB 20A DP pcs- MCB 16A TP lot


c Distribution board DB-2L panel- MCCB 63A TPN pcs

- MCB 10A SP pcs- Contactor 3P-16A pcs

- Timer 24h pcs- Switch & Button lot

- 12 way MCCB board & Accessories lotd Distribution board DB-2P panel

- MCCB 63A TPN pcs

- MCB 16A SP pcs

- MCB 20A SP pcs

- RCB 20A DP pcs

- MCB 16A TP lot


e 4x35 sqmm 1/c PVC Cu Cable + E m

f 4x25 sqmm 1/c PVC Cu Cable + E m

g Trunking 100x100x1.5 mm m

h Hanger, Support & Accessories lot

1.1.4 Supply and installation of final circuit power installation

for retail shop, including:lot -

- MCB boards and accessories.

- Trunking and accessories.

- Cable, conduit and accessories.

- Socket outlets.

- Connection units.

- Power point as specified on the drawings:

13A 1 gang flush mounted switch socket outlet nos13A 1 gang flush mounted switch socket outlet nos13A 2 gang flush mounted switch socket outlet nos13A 2 gang flush mounted switch socket outlet nos

13A 1 gang floor mounted switch socket outlet c/w nos13A 2 gang floor mounted switch socket outlet c/w nos

Recessed Wall / Ceiling / Flush Floor mounted nosRecessed Wall / Ceiling / Flush Floor mounted nos



10/36


ITEMDESCRIPTION


Bill of Quantities

Junction Box for Showcase Light Switch nos




1.1.4 Supply and installation of final circuit power installation

for retail shop, including:lot Incl.

13A switched fused connection unit with DP switch nosFused connection unit with DP switch and Pilot lamp nos

20A Double Pole Switch nos16A TPN Isolator nos

GI Conduit D25 mCu/PVC (1x4.0) sqmm m

Cu/XLPE/PVC (5x4.0) sqmm mAccessories lot

1.1.5 Supply and installation of final circuit lighting installation

for retail shop, including:

lot -

- Switches. -

- Lighting points for all lighting fittings as shown on nos -

- Timer and contactors.

- Trunking, cable, conduit and accessories:Lighting Switch pcs

Trunking 100x100x1.5 mm mGI Conduit D25 m

Cu/PVC (1x2.5) sqmm mAccessories lot

1.1.6 Supply and installation of final circuit lighting installation

for internal facade, including:lot -

- Switches. -- Lighting points for all lighting fittings as shown on nos -

- Timer and contactors.

- Trunking, cable, conduit and accessories:

Lighting Switch pcsTrunking 100x100x1.5 mm m

GI Conduit D25 mCu/PVC (1x2.5) sqmm m

Accessories lot

1.1.7 Installation of all light fittings for retail shop, either

supplied by the Client or the Contractor, including

wiring, conduit / trunking, switch points and battery pack

for light fittings of emergency purpose.

set -

1.1.8 Supply and installation of trunking and conduit

installation for extra low voltage systems, such as A/V

system, computer system, POS system and telephone

system:

lot -

- Recessed Speaker Point nos- Video Outlet Conduit Point nos- Data & Tel Conduit Point nos- Trunking 100x100 mm m- GI Conduit D25 m- Accessories lot



11/36


ITEMDESCRIPTION


Bill of Quantities




1.1.9 Supply and installation of trunking and conduit

installation for security system. Conduit and power point

shall be allowed as follows.

lot -

- 50 conduit points

- 20 power points

Dome type colour camera with wide angle lens point nosAlarm Key Pad Point nos

Door Lock Point nosSecurity Motion Detector Point nos

Traffic People Counter Point nosGI Conduit D25 m

Accessories lot

1.1.10 Supply and installation of the earthing protection

including protective conductor for the low voltage

distr ibut ion system and equipotential bonding to all

extraneous conductive parts in the site area.

lot -

1.1.11 Supply and installation of all fluorescent fittings, with

necessary ballast and all light box. (T5 type)

set -

1.1.12Supply and installation of lighting dimming panel

lot -

- Dimming Panel - Lutron GRX-3504-T-AU-WH set- 8 button control panel - EGRX-8S-WH set

- 2 button control panel - EGRX-2B-SL-WH set- GRX-TVI pcs

1.1.13Provision of miscellaneous items such as

lot -

- Testing and commissioning

- Liaison and applications for approval to utility

- Provision of completion certificates to suit the

- Instructing employers staff,

- Provision of Operating and Maintenance manuals,

- Maintenance during the Defects Liability Period,

- As-fitted drawings,

- Painting and labelling,

- any other incidentals not specifically listed and which

1.1.14Other items if any (to be stated by Tenderer)

lot NA



12/36


ITEMDESCRIPTION


Bill of Quantities



1.2 Fire Services Installations Sum

1.2.1 Alteration and addition to the existing sprinkler system

for retail shop, including supply and installation of

sprinklers, pipeworks and all necessary fittings.

lot -

- Galvanized mild steel pipe f40 m- Galvanized mild steel pipe f32 m- Pipe fittings lot- Sprinkler head

- Supply & installation

Concealed type, 68oC, K8.0 nosStainless steel conceal type, 68oC, K8.0 nos

- Relocation

Concealed type

- Hanger, support lot- Testing lot- Accessiries lot

1.2.2 lteration and addition to the existing automatic and

manual fire alarm system for retail shop, including

supply and installation of alarm bells, smoke detectors,

extended indicating lights, conduits, wir ings and all

necessary accessories.

lot -

Smoke Detector nosFire Alarm Panel 4 zones nos

Alarm belts nosStrobe light nos

Fire alarm manual call point nos2x1.5 mm2 FR Cu/PVC mGI Conduit DN 25 mFlexible GI Conduit DN 20 m

Accessories lotT&C lot

1.2.3 Supply and installation of all electr ical works for fire

services systems including conduit, trunking, wiring and

all necessary equipment.

lot -

Galvanized mild steel pipe f50 mPIpe fitting lotFire hose reel box 1000x600 set

Angle valve DN 50 setHose reel 30m , DN 50 setNozzle DN 50 setHanger support lot

Accessiries lotTesting lot

1.2.4 Supply and installation of portable fire extinguishers c/w

mounting bracket.

lot -

Powder Fire Extinguisher ABC 4 kg nosCo2 Fire Extinguisher 4kg nos



13/36


ITEMDESCRIPTION


Bill of Quantities



Fire Services Installations (cont'd)

1.2.5 Provision of miscellaneous items such as: lot -- Testing and commissioning


companies, regulatory and licensing authorities,


requirements of utility companies, regulatory and

licensing authorities,




- As-fitted drawings,- Painting and labelling,


may be required for the completion of the whole works.

-



14/36


ITEMDESCRIPTION


Bill of Quantities



1.3 MVAC Services Installations Sum -

1.3.1 Dismantle, and modify the existing A/C supply system to

suit the interior decoration.

lot - -

1.3.2 Supply and installation of electrical and control system

for the shop including main switchboard, motor control

panels, and control devices and necessary accessories,

conduit and wiring, etc.

lot -

Duct type temperrature sensor nosProbe type smoke detector nosDifferential Presure switch nos

HVAC control panel setDisplay Panel setVSD 3 KW nosVSD 1.5 KW nosChilled water meter flow rate setCu/PVC/PVC 3x4mm3+1x2.5mm2 mCu/PVC/PVC 2x2.5mm3+1x2.5mm2 mCu/PVC 1x1.5mm2 mSielded Cu/PVC/PVC 2x1.5mm2 mConduit GI D20 mConduit GI D25 mTrunking 100x50x1.5 mm m

Accessories lot

1.3.3 Supply and installation of air conditioning and fresh air

duct work system including insulation, dampers, airgrilles and all necessary fittings.

lot -

Duct 0,8mm m2Fiber glass insulation 32kg/m3, 25mm m3

Attennuator nosVCD 200 nosFlexible canvas connector nosFlexible duct cw insulation 200 m

Air distribution device

* Plenum box for with 50(H) & 40(H) outlet nos* 100(W) Al. linear air diffuser w/30 deflection nosHanger and support lot

Accessories lot

1.3.4 Supply and installation of AHUs and exhaust air fan lot -Air Handling Unit

- 2000l/s nos- 1500l/s nosExhaust air fan, ceiling mounted type, 15L/s pcsHanger, support lot

Antivibrator lotSUS mainternance platform lot

Accessories lot



15/36


ITEMDESCRIPTION


Bill of Quantities



MVAC Services Installations (cont'd)

1.3.5 Supply and installation of chilled water pipes and

condensate drain pipe system including gate valves,

insulation and all necessary fittings.

lot -

Chilled water pipe c/w insulation PU 50 mm

* 40 mm m* 50 mm m* 65 mm m* 80 mm mCondensation drain pipe c/w insulation 25mm

* 32 mm m

* 40mm m* 50mm mPipe fitting lotGate valve

* 40 mm nos* 50 mm nos* 65 mm nos* 80 mm nos

Auto Air Vent

* 20 mm nosStrainers

* 40 mm nos* 50 mm nosTwo- way on/off control valve actuator

* 25mm nosTwo- way modulating control valve with actuator

* 40 mm nos* 50 mm nosBalancing valve with commissioning set

* 40 mm nos* 50 mm nosFlexible joint

* 25 mm nos* 40 mm nos* 50 mm nosDrain cock nosTemperature gauge nosPressure gauge nosSecondary drain pan nosHanger and support lot

Accessories lot

1.3.6 Provision of miscellaneous items such as: lot -

- Testing and commissioning


companies, regulatory and licensing authorities,


requirements of utility companies, regulatory and

licensing authorities,




- As-fitted drawings,

- Painting and labelling,



16/36


ITEMDESCRIPTION


Bill of Quantities


may be required for the completion of the whole works.



MVAC Services Installations (cont'd)

1.3.7 Other items if any (to be stated by Tenderer) lot -Chilled water pipe c/w insulation PU 50 mm

* 80 mm m

1.4 Audio Visual System Installation

Allowance for supply and install new AV System:-

a) DVD player No. -

b) Conceal ceiling speaker No. -

c) Multi -Channel Power Amplifier No. -

d) Equalizer No. -

e) Samsung 40 OUTn-UD, LCD (RTW) c/w brackets. No. -

f) Samsung ME 40B, LED Screen (Staircase Screen &

Screen Vitrine) c/w Wall mount bracket

No. -

g) Magic Info Video wall (Software for LED Video wall) Lot -

h) Testing and commissioning of AV system Sum -

1.5 Security System Installation

a) Allowance for supply and install new Security System - - By Other

2 BUILDER'S WORKS IN CONNECTION WITH M&E

INSTALLATIONS

2.1 Allowance for all builder's works in connection with M&EServices installations Sum



17/36


ITEMDESCRIPTION


Bill of Quantities


SCHEDULE NO.2 M&E INSTALLATIONS (CONT'D)

COLLECTION

Page: SR 2/1 -

Page: SR 2/2 -

Page: SR 2/3 -

Page: SR 2/4 -

Page: SR 2/5 -

Page: SR 2/6 -

Page: SR 2/7 -

Page: SR 2/8 -

Page: SR 2/9 -

Total Carried To GENERAL SUMMARY : -



18/36


Bill of Quantities

ITEM DESCRIPTION QTY UNIT RATE AMOUNT (US$)

Section NO. 3 SEATINGS AREAS

GENERAL NOTES

A This Section is for the fit-out works to Seating

Areas Only. Sub-Tenant Kiosks and Back of House/

Stock/ Office areas shall be priced under Schedule

No.4 and 5 respectively.

Note

B The Contractor shall allow for design calculation duly

endorsed by Registered Engineer and submit to the

Project Manager where appropriate.

Note

C The Contractor must liaise and co-ordinate closely with

all Employer's/ Landlord's Direct Contractors for

necessary staging and programme of the fit out works.

Note

1 MODIFICATION AND ALTERATION WORKS TO

1.1 Allowance for calculation and safe loading check on

base building slab for Safe Installation

1 Sum

1.2 Allowance for installation of Safe 1 Sum

(Safe to be supplied by others)

2 FLOORING

2.1 Preparation of floor level and apply floor screeding to

receive new floor finishes

530 m2

2.2To supply and install 900x150mm White Horse Tile

(HD95014)

583 m2

2.3 To supply and install 5mm stainless steel inlay 166.9 ml

3 WALL AND PARTITIONS

3.1 Make good existing brick wall to receive new wall

finishes

318.1 m2

3.2 Supply and install timber structure backing to receive

Groove Line Panel

83.4 m2

3.3 Supply and install 200x100mm HT. selected metal in

powdered coat finishing (Color to be selected) to

receive existing glass wall by owner

50.8 ml

3.2 Wall Finishing3.2.1 Supply and install Groove Line Panel as specified 83.4 m2

3.2.2 Selected 1/P paint finish 183.2 m2

3.2.3 Bare brick wall in lacquor finish 96.7 m2

3.2.4 Supply and install 150mm stainless steel skirting in hair-

line finish

139.5 ml

3.2.5 Supply and install selected black sticker 3.2 m2

SR3-Seatings Page 18


19/36


Bill of Quantities


SECTION NO. 3 SEATINGS AREA (CONT'D)

3.2.6 Supply and install selected sticker with cut-out lettering 7 sets

4 CEILING

4.1 Exposed ceiling in selected spray paint finish 530 m2

4.2 To supply and install plaster ceiling at 3500mm in

selected paint finish

756.6 m2

4.3 Provide labor to install recess light coves 1 sum

4.4 To supply and install hollow steel support structure for

recessed light coves

141.4 ml

4.5 To supply and install 8mm metal rods support forlightings

TBC ml

4.6 Allowance for access panel, forming openings for M&E

services etc.

1 Sum

5 HAND RAILS

5.1 To supply and install stainless steel hand rail frame in

hair-line finishing

25.5 ml

5.2 To supply and install 850x850x12mm thk tempered

glass (incl. aluminium U channel to receive glass)

12 pcs

6 PLAYGROUND

6.1 Playground mats by specialist

SECTION NO. 3 SEATINGS AREA (CONT'D)COLLECTION

Page: SR 3/1 #REF!

Page: SR 3/2 -

Total Carried To GENERAL SUMMARY : #REF!

SR3-Seatings Page 19


20/36


Bill of Quantities

ITEM DESCRIPTIONQTY UNIT RATE AMOUNT (US$)

SCHEDULE NO. 4 KIOSK AREA

GENERAL NOTES

A This Schedule is for the fit-out works to Kiosk Area

Only. Seatings Area and Back of House/ Stock/

Office areas shall be priced under Schedule No. 3

and 6 respectively.

Note




Note




Note

1 MODIFICATION AND ALTERATION WORKS TO

1.1 Allowance for calculation and safe loading check on

base building slab for Safe Installation

1 Sum

1.2 Allowance for installation of Safe 1 Sum

(Safe to be supplied by others)

2 FLOORING



322.3 m2

2.2 Supply and apply 3 layers water proof in wet works area 136.9 m2

2.3To supply and install 300mm SQ Ceramics Tiles

Seasera 20A rough surface

354 m2


3 WALLS AND PARTITIONS


finishes

358.7 m2

3.2Supply and install timber structure backing to receive

Groove Line Panel

69.9 m2

3.2 To supply and build:3.2.1 Full height brick wall (4000mm) 267.5 m2 -

3.2.2 1200mm height brick wall 61.8 m2

3.2.3 RC Kerb

3.3 To supply and install3.3.1 1200x12mm thick clear glass 28.3 m2

3.3.2 300x12mm thick clear glass 6.3 m2

3.3.3 Support system to hold signage 7 set

SR4-Kiosks Page 20


21/36


Bill of Quantities


3.4 Wall Finishing3.4.1 To supply and install 300x300 selected Ceramic wall tile 781.3 m2

3.4.2 Supply and install Groove Line Panel as specified 69.9 m2

3.4.3 Selected spray paint finish 93.2 m2

3.4.4 Selected tile finish (1/T) 1.8 m2

3.4.5Supply and install 150mm stainless steel skirting in hair-

line finish

23.3 ml

4 CEILING

4.1 Exposed ceiling in selected spray paint finish 82.11 m2

4.2 2'x4' HCCP Ceiling at 2700mm 182.9 m2

4.3 Allowance for access panel, forming openings for M&Eservices etc.

1 Sum

4.4To supply and install 8mm metal rods support for

lightings

TBC ml

5 FRONT COUNTER

DETAILS MISSING


SECTION NO. 4 KIOSK AREA (CONT'D)

7 DOORS

Supply and Install the following doors including finishes,

ironmongeries, fittings and accessories as specified:-

DETAILS MISSING 9 sets

Carried to Collection : #REF!

SECTION NO. 4 KIOSK AREA (CONT'D)

COLLECTION

Page: SR 4/1 -

Page: SR 4/2 #REF!

Page: SR 4/3 #REF!

Page: SR 4/4 #REF!

Page: SR 4/5 #REF!

SR4-Kiosks Page 21


22/36


Bill of Quantities



SR4-Kiosks Page 22


23/36


Bill of Quantities

ITEM DESCRIPTIONQTY

UNITRATE AMOUNT (US$)

SECTION NO. 5 BACK OF HOUSE AREA

GENERAL NOTES

A This Schedule is for the fit-out works to Back of

House/Service Corridor and Common Area only.

Note




Note




Note

1 FLOOR FINISHES



252.5 m2 0

1.2 To supply and install 300mm SQ Ceramics Tiles

Seasera 20A rough surface

74.2 m2

1.3 To supply and install Cemkrete S-Crete HF MF Light

Grey

179.3 m2


2 WALL AND PARTITION


finishes

318.5 m2 0

2.2 Supply and build full height brick wall (4000mm) 53.4 m2

2.3 Wall Finishing

2.3.1 Selected 1/P paint Finish 45.2 m2

2.3.3 To supply and install 300x300 selected Ceramic wall tile 134.3 m2

2.3.4 Bare brick wall in lacquor finish 123.3 m2

2.3.5 Supply and install 150mm stainless steel skirting in hair-

line finish

45.2 ml

3 CEILING

3.1 Exposed ceiling in selected spray paint finish 535.2 m2 0

3.2 To supply and install 8mm metal rods support for

lightings

TBC ml #VALUE!

4 DOORS

4.1 DETAILS MISSING 3 set

SR5-BOH Page 23


24/36


Bill of Quantities

ITEM DESCRIPTIONQTY

UNITRATE AMOUNT (US$)

Carried to Collection : 0

SCHEDULE NO. 5 BACK OF HOUSE AREA (G/F & B/F) (CONT'D)

COLLECTION

Page: SR 5/1 #REF!

Page: SR 5/2 0


SR5-BOH Page 24


25/36


SCHEDULE OF RATES

ITEMDESCRIPTION

QTYUNIT

RATE AMOUNT (HK$)

SECTION NO. 6 PELMET AND COLUMNS

GENERAL NOTES

A The Contractor shall refer to all relevant Drawings &

Specification for the standard of quality, workmanship

and pricing the Faade Works.

Note

B All proposed faade contractors shall be subject to the

final approval by the Project Manager prior to the

commencement of the Works.

Note

C The Contractor is required to refer to the Specification

Preliminaries of the Tender Documents for all

Guarantee/ Warranty requirements for the Faade

Works.

Note

D The Contractor shall allow for all FRP provisions and

associated Landlord's requirements applicable to the

Works.

Note

E The Contractor shall allow for design calculation duly



Note

F The Contractor must liaise and co-ordinate closely with


necessary staging and programme of the Faade

Works.

Note

1 FAADE PELMET

1.1 Entrance Pelmet

1.1.1 To supply and install 40x40mm steel hollow sections for

reinforcement to concrete slab

21 ml -

1.1.2 To supply and install 275x45x5mm 'U' profile in selected

metal (4/MF) to receive 20mm thk glass

6.2 m2

1.1.3 To supply and install 12mm MDF backing to receive

20mm thk glass

4.1 m2

1.1.4 To supply and install 20mm thk clear tempered glass 9.6 m2

1.2 Kiosk and Seatings Area Pelmet

1.2.1 Hol low Sect ion Pelmet

1.2.1a Supply and install 40x40mm selected metal hollow

section in powder coat finish (Color to be selected) to

form pelmet structure as specified

398.4 ml

1.2.1b Supply and install 10mm thk. metal plates in powder

coat finish

11.1 m2

1.2.1c Supply and install 6mm thk mirror (3/G) 8.2 m2

1.2.1d Supply and install 12mm thk clear glass (1/G) 10.7 m2

1.2.2 Timber Str ips Pelmet

SR6-Pelmet and Columns Page 25


26/36


SCHEDULE OF RATES

ITEMDESCRIPTION

QTYUNIT

RATE AMOUNT (HK$)

1.2.2a Supply and install 8mm metal rods support to hang

pelmet system

18 m

1.2.2b Supply and install 150x50mm Timber Strips in Lacquor

finish

101.3 ml

1.2.2c Supply and install 50x25mm Timber Strips in Lacquor

finish

20.2 ml

1.2.2d Supply and install Decorative nuts & bolts 1 lot

1.2.3 Metal Str ips Pelmet

1.2.3a Supply and install 18mm thk MDF backing, reinforced

by 50x100mm steel hollow section dropped down from

concrete slab @ 500mm/each

107.3 m2

1.2.3b Supply and install 1600x150x30mm thk Decorative

Metal Strips in powder coat finish (Color to be selected)

105.7 m2


SECTION NO. 6 PELMET AND COLUMNS (CONT'D)

2 COLUMNS

2.1 To supply and install metal stud Box-Up with 9mm

Gypsum Board in selected white Jotun paint finish (2/P)

111.9 m2

2.2 To supply and install 90x180mm timber strips to receive

selected LED light finish and metal strips

38.2 ml

2.3 To supply and install 300x9mm thk selected metal strips

(3/MF) in Chrome finish

38.7 ml

2.4 To supply and install 150x5mm stainless steel in hair-

line finish. C/w MDF backing.

30.8 ml

2.5 To supply and install timber backing to receive Photo

Frame by others

1 Sum

3 SIGNAGE

3.1 To supply and install 350mm HT. cut-out lettering in

Clear Acrylic finish (1/AC). C/w 8mm metal rods support

1 set

3.2 To supply and install 350mm HT. x 50mm THK.

stainless steel Signage Frame in hair-line finish, with cut

out lettering. C/w Clear Acrylic backing and LED

lightings. (For 20mm thk glass pelmet)

1 set



27/36


SCHEDULE OF RATES

ITEMDESCRIPTION

QTYUNIT

RATE AMOUNT (HK$)


SCHEDULE NO. 7 SHOP FRONT FAADE SYSTEM (CONT'D)

COLLECTION

Page: SR 7/1 -

Page: SR 7/2 #REF!

Page: SR 7/2 -



28/36


SCHEDULE OF RATES

ITEMDESCRIPTION

QTYUNIT

RATE AMOUNT (HK$)

Total Carried To GENERAL SUMMARY: #REF!



29/36


SCHEDULE OF RATES


SECTION NO. 6 SUPPLY OF LIGHT FIXTURES

GENERAL NOTES

A Unless otherwise stated, the Contractor shall price theinstallation ONLY of light fixtures under Schedule No. 3 - M&E

Installations, Schedule No. 3 - Retail Area (1/F), Schedule No. 4 -

Retail Area (2/F) and Schedule No. 5 - Back of House Area

respectively.

Note

B Reference shall be made to the M&E Specification Documents and all

relevant drawings for the specification of light fixtures and its

requirement.

Note

C The Contractor shall refer to the Approved Quotation given by the

Employer and inserted under Specification Section for pricing the

supply of specified light fixtures. All quantities in the quotation are for

reference ONLY and it is the sole responsibility for the Contractor to

check and verify the quantities according to the drawings and

specification requirements in the tender.

Note

The Contractor is deemed to include due allowance in the Contract

Sum for all the exclusion items & qualification offered in these

quotations by respective nominated suppliers. No adjustment to the

Contract Sum is allowed resulting from his ignorance of this

requirement.

Note

D When pricing the supply of light fixtures, the "supply rates" shall,

unless otherwise excluded in the Approved Quotation, include cost of

packing, carriage and delivery to Site, contractor's warehouse or

factory, where further production is required. The Contractor shall

allow all other costs for installation under Schedule No. 3, 4, 5 & 6

respectively.

Note

E Supply and installation of light fixtures for External and InternalShop Front Faade (including Light Boxes, Window Displays

and Backlit Logo) are carried out by others and not forming part

of this Contract.

Note

1 Supply and install the following light fixtures including all

necessary bulbs, transformers, accessories and spares as

specified (Unless otherwise supplied direct by the Employer) :-

1.1 Light Fixtures to CEILING (1F & 2F)

a) C3 Halogen lights for ceiling to all BOH/ Stock/ Office areas Set 0


SR6 Li ht Fi t P 29


30/36


SCHEDULE OF RATES


SCHEDULE NO. 6 SUPPLY OF LIGHT FIXTURES (CONT'D)

1 Supply and install the following light fixtures including all

necessary bulbs, transformers, accessories and spares as

specified (Unless otherwise supplied direct by the Employer) :-(CONT'D)

1.2

a)

1.3

a)

2 Delivery and Handling Charges (PROVISIONAL)

2.1 Logistic for delivery, handling and all associated expense etc. for alllight fixtures supplied by Nominated Suppliers above 1 Sum Refer to Prelim

[Note: Warranty and maintenance for all fluorescent tube within

Defect Liability Period and LED lights with supplier's warranty

are deemed to be included as per Preliminaries Specification

requirement.]


SR6-Light Fixtures Page 30


31/36


SCHEDULE OF RATES


SCHEDULE NO. 6 SUPPLY OF LIGHT FIXTURES (CONT'D)

COLLECTION

Page: SR 6/1 0

Page: SR 6/2 0

Total Carried To GENERAL SUMMARY : 0

SR6-Light Fixtures Page 31


32/36


SCHEDULE OF RATES


SCHEDULE NO. 8 - PC SUM FOR MATERIAL SUPPLY

1 Allowance for PC SUM for SUPPLY ONLY of the

following materials:-


SR8-PC Sum Page 32


33/36


SCHEDULE OF RATES


SCHEDULE NO. 8 - PC SUM FOR MATERIAL SUPPLY (CONT'D)8a

8b

8c

9a

9b

9c

10a

10b

10c

11a

11b

11c

12a

12b

12c

13a

13b

13c

14a

14b

14c

15a

15b

15c

16a

16b

16c

17a

17b

17c

Carried to Collection : 0.00

SR8-PC Sum Page 33


34/36


SCHEDULE OF RATES


SCHEDULE NO. 8 - PC SUM FOR MATERIAL SUPPLY (CONT'D)

18a

18b

18c

19a

19b

19c

20a

20b

20c

21a21b

22a

22b

23a

23b

23c

24a

24b

24c

25a

25b

25c

26a

26b

26c

Carried to Collection : 0.00

SR8-PC Sum Page 34


35/36


SCHEDULE OF RATES


SCHEDULE NO. 8 - PC SUM FOR MATERIAL SUPPLY (CONT'D)

COLLECTION

Page: SR 8/1 0

Page: SR 8/2 0

Page: SR 8/3 0

Total Carried To GENERAL SUMMARY: 0

SR8-PC Sum Page 35


36/36

SCHEDULE OF RATES


SCHEDULE NO. 8 DAYWORK SCHEDULE

GENERAL NOTES

A The Contractor shall submit a set of daily wages rates for the

following types of workers:

1 General labour (skilled) 1 Day

2 General labour (non-skilled) 1 Day

3 Carpenter 1 Day

4 Plasterer 1 Day

5 Painter 1 Day

6 Decorator 1 Day

7 Metal worker 1 Day

8 Electrician 1 Day

9 M&E worker 1 Day

10 Plumber 1 Day