bohren - salotehniksalotehnik.hr/wp-content/uploads/2016/03/busenje i rastokarivanj… · 2...
TRANSCRIPT
bohren10/2015
ww
w.ar
no.d
e
Katalogergänzung bohrenProduct expansion DrillingAmpliamento gamma Foratura
2 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Sehr geehrter Kunde,
mit dieser broschüre möchten wir Ihnen unsere aktuellen Produkt-ergänzungen und Produkt-neuheiten im bereich bohren vorstellen, die wir durch die enge Zusammenarbeit mit Ihnen ständig vor-antreiben. Details, Informationen und Anwendungshinweise zu den einzelnen Produktergänzungen finden Sie in den jeweiligen Kapiteln unseres hauptkata-logs bohren.
Profitieren Sie nebenbei von den Arno® Service-Leistungen wie Sonderlösungen, Lieferungen über nacht und ein kompe-tentes Außendienst- und Anwendungs-techniker-Team.
Viel Vergnügen beim Lesen! Sollten Sie Fragen oder Anregungen zu unseren Produkten haben, sprechen Sie uns einfach an.
Ihr Arno®-Team
Dear customer,
With this brochure we would like to pres-ent our new product expansions for drilling applications. Detailed information of the general tool range you will find in our main drilling catalogue.
In addition to our excellent products we offer overnight delivery service, competent special solutions where our standards may not suffice and a qualified team of external technical sales engineers.
Enjoy your reading and should you have any questions, please do not hesitate to contact us.
Your ARNO® team
Gentile Cliente,
Con questo opuscolo vogliamo presentare le nostre novità e gli ultimi ampliamenti gamma prodotto per le lavorazioni di fora-tura. Vogliamo costantemente guardare agli sviluppi futuri attraverso una stretta collaborazione con voi. Ulteriori dettagli, informazioni e istruzioni sui singoli prodotti si trovano nei rispettivi capitoli del nostro catalogo generale di foratura.
Il riconosciuto servizio ARNO® offre conse-gne entro le 24h e un supporto tecnico sul campo competente.
Buona lettura! Se avete domande o sugge-rimenti sui nostri prodotti, non esitate a contattarci.
Il nostro ARNO®-Team
Schneidplattenbohrer ShArK-DrILL® Spade drill SHARK-DRILL® Sistema di foratura a cuspide SHARK-DRILL®
• erweiterung Trägerwerkzeuge • Product expansion drill holders • Ampliamento gamma corpi punta 3 – 5• erweiterung Wendeschneidplatten • Product expansion inserts • Ampliamento gamma inserti 6 – 8
bohrsystem ShArK-DrILL2 Drill system SHARK-DRILL2 Sistema di foratura SHARK-DRILL2
• erweiterung Trägerwerkzeuge • Product expansion drill holders • Ampliamento gamma corpi punta 9 – 11• erweiterung Wendeschneidplatten • Product expansion inserts • Ampliamento gamma inserti 12 – 16
Arno®-Kurzlochbohrer AKb ARNO® Short hole drill AKB ARNO®- Punte per fori corti AKB
• erweiterung Trägerwerkzeuge • Product expansion drill holders • Ampliamento gamma corpi punta 17 – 20• erweiterung Wendeschneidplatten • Product expansion inserts • Ampliamento gamma inserti 21 – 23
ShArK-CUT® bohren und Drehen SHARK-CUT drilling and turning SHARK-CUT Foratura e Tornitura
• erweiterung Trägerwerkzeuge • Product expansion drill holders • Ampliamento gamma corpi punta 25 – 28• erweiterung Wendeschneidplatten • Product expansion inserts • Ampliamento gamma inserti 29 – 34
Produktergänzung bohren
Product expansion Drilling
Ampliamento gamma Foratura
3Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Der Arno® Schneidplattenbohrer mit innerer Kühl mittel-zuführung bietet im Durchmesserbereich von 9,5 – 114 mm eine große Auswahl für verschiedene bearbeitungsmöglich-keiten. Passende Schneideinsätze in vielen Geometrien und Sorten können einfach und sicher mit Torx-Schrauben ge-spannt werden.
Il sistema di foratura ARNO® con adduzione interna del refrigeran-te nella gamma di foratura da 9,5 mm a 114 mm in diverse lun-ghezze e tipologia di attacco. Diverse geometrie e qualità di inserti in HSS e metallo duro possono essere combinate per tutti i mate-riali da lavorare. Tutte le cuspidi sono bloccate con viti Torx.
The ARNO® spade drill with through tool coolant in diameter range from 9.5 – 114 mm offer solutions in a number of applica-tions. Suitable geometries in a number of grades and coatings are easily and securely locked using Torx screws.
Arno® Schneidplattenbohrer ShArK-DrILL®
ARNO® Flanged holders SHARK-DRILL®
ARNO® Corpo punta SHARK-DRILL®
ShArK-DrILL®
4 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Schneidplattenbohrer mit DIn ISo 9766-Schaft ShArK-DrILL®
Flanged holders - DIN ISO 9766 shankCorpi punta - Attacco DIN ISO 9766
✓mit IKwith iccon ic
DIN ISO 9766
Serie / Series / SerieG
Trägerwerkzeug / Drill holder / Corpo punta
bezeichnungDesignationArticolo
bohrtiefeDrill depth
Profondita foraturaD l l2 l3 h dA MK
GewindeThreadFiletto
PG 45 neuerung / News / Novità
hG1550-1765-240SPW20 13,5 x D -15 x D
15,5 - 17,65 271 240 41,9 – 20 – –
größere bohrtiefendeeper drill depthmaggiore profondità di foratura
bezeichnungDesignationArticolo
bohrtiefeDrill depth
Profondita foraturaD l l2 l3 h dA MK
GewindeThreadFiletto
PG 45 neuerung / News / Novità
hK2200-2438-365SPW25 15 x D -16,5 x D
22,0 - 24,38 406 365 53,1 – 25 – –
größere bohrtiefendeeper drill depthmaggiore profondità di foratura
hinweis: Trägerwerkzeuge werden mit Klemmschrauben, 2 ersatzschrauben und Schlüssel geliefert. Remark: Holders will be supplied with clamping screws, 2 spare screws and key. Nota: L´utensile é fornito completo di 1 vite, 2 viti di ricambio e 1 chiave.
✓mit IKwith iccon ic
DIN ISO 9766
Serie / Series / SerieK
Trägerwerkzeug / Drill holder / Corpo punta
* Gewinde G 1/8"Thread
Filetto -W
hinweis: Trägerwerkzeuge werden mit Klemmschrauben, 2 ersatzschrauben und Schlüssel geliefert. Remark: Holders will be supplied with clamping screws, 2 spare screws and key. Nota: L´utensile é fornito completo di 1 vite, 2 viti di ricambio e 1 chiave.
5Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Schneidplattenbohrer mit DIn ISo 9766-Schaft ShArK-DrILL®
Flanged holders - DIN ISO 9766 shankCorpi punta - Attacco DIN ISO 9766
✓mit IKwith iccon ic
DIN ISO 9766
Serie / Series / Serieo
Trägerwerkzeug / Drill holder / Corpo punta
* Gewinde G 1/4"Thread
Filetto -W
hinweis: Trägerwerkzeuge werden mit Klemmschrauben, 2 ersatzschrauben und Schlüssel geliefert. Remark: Holders will be supplied with clamping screws, 2 spare screws and key. Nota: L´utensile é fornito completo di 1 vite, 2 viti di ricambio e 1 chiave.
bezeichnungDesignationArticolo
bohrtiefeDrill depth
Profondita foraturaD l l2 l3 h dA MK
GewindeThreadFiletto
PG 45 neuerung / News / Novità
ho3000-3505-410SPW32 11,5 x D -13,5 x D
30,0 - 35,05 456,5 410 57,9 – 32 – –
größere bohrtiefendeeper drill depthmaggiore profondità di foratura
6 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Schneidplatten ShArK-DrILL®
InsertsInserti
Serie / Series / Seriee
Schneidplatte / Insert / Inserto
Schneidplatte / Insert / Inserto
bezeichnung Designation Articolo
Durchmesser Diameter Diametro
PG 46
(mm) (decimal) (inch)
hSS
5Ti
AIN
hSS
8Ti
AIN
neuerung / News / Novità
Pe14.1 14,1 0,5551" neuer DurchmesserNew diameterNuevo diametro
Pe14.4 14,4 0,5569"
bezeichnung Designation Articolo
Durchmesser Diameter Diametro
PG 46
(mm) (decimal) (inch)
hSS
5Ti
AIN
hSS
8Ti
AIN
neuerung / News / Novità
PI19.3 19,3 0,7598" neuer DurchmesserNew diameterNuevo diametro
PI20.1 20,1 0,7913"
Kleinste Verpackungseinheit: 2 Stück Packed in two's = minimum quantity Confezione da 2 pezzi = Quantitativo minimo di acquisto
P l
M l
KnS l
h
P l l
M l l
K l
nS l l
h
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
Serie / Series / SerieI
7Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Schneidplatten ShArK-DrILL®
InsertsInserti
Schneidplatte / Insert / Inserto
bezeichnung Designation Articolo
Durchmesser Diameter Diametro
PG 46
(mm) (decimal) (inch)
hSS
5Ti
AIN
hSS
8Ti
AIN
neuerung / News / Novità
PS61.11 61,11 2,4059" 2 13/32
neuer DurchmesserNew diameterNuevo diametro
PS61.91 61,91 2,4374" 2 7/16
PS65.09 65,09 2,5626" 2 9/16
bezeichnung Designation Articolo
Durchmesser Diameter Diametro
PG 46
(mm) (decimal) (inch)
hSS
5Ti
AIN
hSS
8Ti
AIN
neuerung / News / Novità
PS49-AS 49,0 1,9291" neuer DurchmesserNew diameterNuevo diametro
P l
M l
KnS l
h
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
As geometry not available for the US market.P l
M l
KnS l
h
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
Serie / Series / SerieS
Serie / Series / SerieS
Schneidplatte / Insert / Inserto AS Geometrie / Geometry / Geometria
8 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Schneidplatten ShArK-DrILL®
InsertsInserti
bezeichnung Designation Articolo
Durchmesser Diameter Diametro
PG 46
(mm) (decimal) (inch)
hSS
5Ti
AIN
hSS
8Ti
AIN
neuerung / News / Novità
PU63.5 63,5 2,5984" 2 1/2
neuer DurchmesserNew diameterNuevo diametro
PU65 65,0 2,5591" 2 9/16
PU68.26 68,26 2,6874" 2 11/16
P l
M l
KnS l
h
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
Serie / Series / SerieU
Schneidplatte / Insert / Inserto
Weitere Informationen und Details zum Schneidplattenbohrer ShArK-DrILL® finden Sie im Arno® Katalog „Werkzeuge und Wendeschneidplatten zum bohren“ Kapitel 1.For more information about the SHARK-DRILL® please see our ARNO® catalogue “Drilling tools and indexable inserts for drilling” chapter 1.Per ulteriori informazioni sul sistema SHARK-DRILL® consultare il nuovo catalogo “Utensili ed inserti di Foratura” Capitolo 1.
9Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
höchste bohrleistungen verspricht der Arno® ShArK-DrILL² für den Durchmesserbereich von 14 – 32 mm.
neben einem stabilen bund zur Aufnahme hoher Axialkräfte überzeugt der bohrer mit einem unkomplizierten Platten-wechsel, selbst in eingebauten Zustand.
In 8 x D verfügt der bohrer über eine Führungsphase. er ist zusätzlich in 2 x D, 3 x D und 5 x D ab Lager erhältlich.
Massime prestazioni di foratura per la famiglia ARNO® SHARK-DRILL² sui diametri 14 – 32 mm.
Oltre ad un ampia flangia di appoggio per dare stabilità ed assorbire le elevate forze assiali, anche la sede inserto semplice e precisa garantisce il miglior funzionamento pratico.
Disponibile a stock nelle versioni 2 x D, 3 x D, 5 x D ed 8 x D.
High performance ARNO® SHARK-DRILL² for diameter range 14 – 32 mm.
As well as offering a large location shoulder for absorbing high axial forces the drill excels by its uncomplicated insert replace-ment facility, even while situated in the machine.
In 8 x D variety the drill has a guide land. The drills are also available ex stock in 2 x D, 3 x D and 5 x D drill depth versions.
Arno® Schneidplattenbohrer ShArK-DrILL2
ARNO® Flanged holders SHARK-DRILL2
ARNO® Corpo punta SHARK-DRILL2
ShArK-DrILL²
10 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
ShArK-DrILL²
AP5440PVD-beschichtete hartmetallsorte erste Wahl für die Stahlbearbeitung, aber in der nebenanwendung ebenso für rostfreie Werkstoffe geeignet.
PVD coated carbide grade First choice for steel drilling, also suitable for stainless steel.
Qualità di metallo duro rivestita PVD Prima scelta per la foratura di acciaio, idonea anche per acciai inossidabili.
- STUniverselle Geometrie zur bearbeitung von Stählen und – mit einschränkungen – bei rostfreien Stählen. Sie zeichnet sich durch gutes Zentrierverhalten sowie gute Spanausbringung aus.
Universal geometry for steel machining and with limitations also stainless steel. The geometry offers enhanced centring and improved chip breaking.
Geometria universale per la lavorazione di acciai e limitatamente per acciai inossida-bili. LA caratterizza un buon centraggio ed una eccellente formazione truciolo.
Sortenbeschreibung / Grade description / Descrizione delle Qualitá
Geometrie / Geometry / Geometry / Geometria
Weiterentwicklung des bereits etablierten ShArK-DrILL² Systems. Schneidplatten mit neuer, verbesserter Sorte und beschichtung. Die Geometrie -ST ist in Verbindung mit der neuen Sorte AP5440 optimal für die Stahlzerspanung ge-eignet.
Product development of the already well established SHARK-DRILL2 system. The new -ST geometry and AP5440 grade is ideal for drilling steel.
Ampliamento gamma sistema SHARK Dill2. Inserti con nuova migliorata qualità e rivestimento. La geometria –ST abbinata alla qualità AP5440 è stata sviluppata appositamente per la foratura di acciaio.
SDIShArK-DrILL2 SchneidplatteInsert
Inserto
2350Durchmesser Ø 23,50 mmDiameter Ø 23.50 mm
Diametro Ø 23,50 mm
AP5440SorteGrade
Qualità
en5SchneidkantenzurichtungCutting edge preparation
Preparazione tagliente
-STGeometrie ST = Standard StahlGeometry ST = Standard steel
Geometria ST = Acciaio
11Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Schneidplattenbohrer ShArK-DrILL2
Flanged holders Corpi punta
DIN ISO 9766
xD2
2 x D Trägerwerkzeug / Drill holder / Corpo punta
8 x D Trägerwerkzeug / Drill holder / Corpo punta
bezeichnung Designation Articolo
D von Ø… bis Ø from Ø… to Ø da Ø... a Ø...
I l1I2 Bohrtiefe max.
Maximum drill depth Massima profondità di foratura
I3 dA PG 9 neuerung / News / Novità
SD2-2500r32 25,00 - 25,49 90 86 50 60 32 Weitere Durchmesser bei Schaftgröße 32More diameters with 32 shank sizeNuovo stelo diametro 32
SD2-2800r32 28,00 - 28,49 98,5 94 56 60 32
bezeichnung Designation Articolo
D von Ø… bis Ø from Ø… to Ø da Ø... a Ø...
l l1I2 Bohrtiefe max.
Maximum drill depth Massima profondità di foratura
l3 da PG 9 neuerung / News / Novità
SD8-2450r32 24,50 - 24,99 235,45 231,4 196 60 32 neuer DurchmesserNew diameterNuevo diametro
✓mit IKwith iccon ic
hinweis: Trägerwerkzeuge werden mit Klemmschrauben und Schlüssel geliefert.Remark: Holders will be supplied with clamping screws and key.Nota: L’utensile é fornito completo di vite e chiave.
hinweis: Trägerwerkzeuge werden mit Klemmschrauben und Schlüssel geliefert.Remark: Holders will be supplied with clamping screws and key.Nota: L’utensile é fornito completo di vite e chiave.
DIN ISO 9766
xD8
✓mit IKwith iccon ic
12 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Schneidplatten ShArK-DrILL2
Inserts Inserti
SDI… – Geometrie / Geometry / Geometria –ST140°
Ø
PG 10
bezeichnung Designation Articolo
Durchmesser / Diameter / Diametro
AP54
40 neuerung News Novità(mm) (deci-
mal) (Inch)
SDI1300en5-ST 13,0 0.5118"
neue GeometrieNew geometryNuovo geometria
SDI1310en5-ST 13,1 0.5157"
SDI1320en5-ST 13,2 0.5197"
SDI1400en5-ST 14,0 0.5512"
SDI1429en5-ST 14,29 0.5626" 9/16
SDI1450en5-ST 14,5 0.5709"
SDI1500en5-ST 15,0 0.5906"
SDI1508en5-ST 15,08 0.5937" 19/32
SDI1510en5-ST 15,1 0.5944"
SDI1530en5-ST 15,3 0.6024"
SDI1550en5-ST 15,5 0.6102"
SDI1580en5-ST 15,8 0.6220"
SDI1587en5-ST 15,87 0.6248" 5/8
SDI1600en5-ST 16,0 0.6299"
SDI1609en5-ST 16,09 0.6335"
SDI1610en5-ST 16,1 0.6339"
SDI1650en5-ST 16,5 0.6496"
SDI1700en5-ST 17,0 0.6693"
SDI1707en5-ST 17,07 0.6720" 43/64
SDI1710en5-ST 17,1 0.6732"
SDI1750en5-ST 17,5 0.6890"
SDI1786en5-ST 17,86 0.7031" 21/64
SDI1800en5-ST 18,0 0.7087"
SDI1810en5-ST 18,1 0.7126"
SDI1850en5-ST 18,5 0.7283"
SDI1880en5-ST 18,8 0.7402"
SDI1900en5-ST 19,0 0.7480"
SDI1910en5-ST 19,1 0.7520"
SDI1920en5-ST 19,20 0.7559"
PG 10
bezeichnung Designation Articolo
Durchmesser / Diameter / Diametro
AP54
40 neuerung News Novità(mm) (deci-
mal) (Inch)
SDI1950en5-ST 19,5 0.7677"
neue GeometrieNew geometryNuovo geometria
SDI1980en5-ST 19,8 0.7795"
SDI2000en5-ST 20,0 0.7874"
SDI2010en5-ST 20,1 0.7913"
SDI2024en5-ST 20,24 0.7969" 51/64
SDI2050en5-ST 20,5 0.8071"
SDI2100en5-ST 21,0 0.8268"
SDI2150en5-ST 21,5 0.8465"
SDI2200en5-ST 22,0 0.8661"
SDI2210en5-ST 22,1 0.8701"
SDI2250en5-ST 22,5 0.8858"
SDI2300en5-ST 23,0 0.9055"
SDI2350en5-ST 23,5 0.9252"
SDI2400en5-ST 24,0 0.9449"
SDI2410en5-ST 24,1 0.9488"
SDI2450en5-ST 24,5 0.9646"
SDI2500en5-ST 25,0 0.9843" 63/64
SDI2525en5-ST 25,25 0.9940"
SDI2600en5-ST 26,0 1.0236"
SDI2650en5-ST 26,5 1.0433"
SDI2700en5-ST 27,0 1.0630" 11/16
SDI2750en5-ST 27,5 1.0827"
SDI2800en5-ST 28,0 1.1024"
SDI2830en5-ST 28,30 1.1142"
SDI2900en5-ST 29,0 1.1417"
SDI3000en5-ST 30,0 1.1811"
SDI3100en5-ST 31,0 1.2205"
SDI3150en5-ST 31,5 1.2402"
SDI3200en5-ST 32,0 1.2598"
P l
M l
KnSh
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
ST Schneideinsatz / Insert / Inserto
Weitere Informationen und Details zum Schneidplattenbohrer ShArK-DrILL2 finden Sie im Arno® Katalog „Werkzeuge und Wendeschneidplatten zum bohren“ Kapitel 2.For more information about the SHARK-DRILL2 please see our ARNO® catalogue “Drilling tools and indexable inserts for drilling” chapter 2.Per ulteriori informazioni sul sistema SHARK-DRILL2 consultare il nuovo catalogo “Utensili ed inserti di Foratura” Capitolo 2.
13Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Schneidplatten ShArK-DrILL2
Inserts Inserti
140°
Ø
S Schneideinsatz / Insert / Inserto
Durchmesser / Diameter / Diametro PG 10
bezeichnung Designation Articolo
(mm) (decimal) (inch)
AP50
25
neuerung / News / Novità
SDI1700-S 17,00 0,6692" 43/64
neue DurchmesserNew diameterNuevo diametro
SDI1750-S 17,50 0,6889"
SDI1780-S 17,80 0,7007" 45/64
SDI2020-S 20,20 0,7952" 51/64
SDI2250-S 22,50 0,8858"
SDI2980-S 29,80 1,1732"
Durchmesser / Diameter / Diametro PG 10
bezeichnung Designation Articolo
(mm) (decimal) (inch)
AM50
40
neuerung / News / Novità
SDI2480-VA 24,80 0,9763" neuer Durchmesser / New diameter / Nuevo diametro
140°
Ø
VA Schneideinsatz / Insert / Inserto
P l
M l
KnSh
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
P l
M l
KnSh
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
14 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
empfohlene Schnittwerte ShArK-DrILL2
Die Tabellenwerte sind Richtwerte.Es kann notwendig sein, die Werte den jeweiligen Bearbeitungsumständen anzupassen.
ISo Werkstoff
Zugf
estig
keit
Schn
itt-
gesc
hwin
digk
eit
Ø-b
erei
ch
12 –
15 m
m
Ø-b
erei
ch
15 –
18 m
m
Ø-b
erei
ch
18 –
22 m
m
Ø-b
erei
ch
22 –
27 m
m
Ø-b
erei
ch
27 –
32 m
m
(N/mm2) (m/min) (mm/U) (mm/U) (mm/U) (mm/U) (mm/U)
P
Automatenstähle z. B. 9SMn28; 9SMnPb28; 10SPb20
bis 500 125 0,15 - 0,29 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
500 - 850 105 0,13 - 0,25 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
baustähle z. B. St33; St37-2; St44-2; St52; St60
350 - 500 95 0,13 - 0,25 0,21 - 0,36 0,26 - 0,39 0,30 - 0,45 0,32 - 0,48
500 - 850 75 0,11 - 0,21 0,20 - 0,34 0,21 - 0,32 0,26 - 0,39 0,29 - 0,44
850 - 1200 70 0,09 - 0,17 0,17 - 0,29 0,20 - 0,30 0,22 - 0,33 0,26 - 0,39
Unlegierte und niedrig legierter Stahl beinhaltet auch Vergütungsstähle und einsatzstählez. B. C15; C22; 20Mn5; Ck45
bis 450 120 0,13 - 0,25 0,20 - 0,34 0,26 - 0,39 0,32 - 0,48 0,34 - 0,51
450 - 750 95 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
750 - 900 85 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
900 - 1100 70 0,09 - 0,17 0,15 - 0,26 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
Legierter Stahlz. B. 42CrMo4; 16MnCr5; 36CrNiMo4
14NiCrMo13-4; Ck75; Ck101; 17CrNiMo8, 35CrMo4; 41Cr4; 50MnSi4
bis 600 100 0,13 - 0,25 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
600 - 800 90 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
800 - 950 85 0,11 - 0,21 0,15 - 0,26 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
950 - 110 75 0,09 - 0,17 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
1100 - 1250 65 0,07 - 0,13 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
hochlegierter und hochfester Stahlz. B. 41CrAlMo7; 36CrNiMo4;
32NiCrMo14-5
600 - 1000 60 0,11 - 0,21 0,15 - 0,26 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1000 - 1200 55 0,09 - 0,17 0,11 - 0,19 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1200 - 1350 50 0,07 - 0,13 0,09 - 0,15 0,17 - 0,26 0,20 - 0,30 0,23 - 0,35
Werkzeugstählez. B. C75W; 102Cr6; 105WCr6; X153CrMoV12
500 - 700 65 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
700 - 950 50 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
M nichtrostender Stahlund Stahlguss
austenitisch und 450 - 610 65 0,09 - 0,14 0,16 - 0,21 0,19 - 0,24 0,24 - 0,26 0,27 - 0,30
austenitisch / ferritisch, abgeschreckt 610 - 930 50 0,09 - 0,14 0,14 - 0,18 0,16 - 0,20 0,20 - 0,22 0,23 - 0,25
KGrauguss z. B. GG25; GG40
perlitisch, ferritisch 500 - 700 125 0,14 - 0,27 0,20 - 0,38 0,26 - 0,42 0,37 - 0,52 0,40 - 0,56
perlitisch, martensitisch 700 - 850 95 0,10 - 0,19 0,16 - 0,30 0,19 - 0,30 0,26 - 0,36 0,29 - 0,41
perlitisch, martensitisch 850 - 1100 85 0,10 - 0,19 0,14 - 0,27 0,16 - 0,26 0,22 - 0,31 0,25 - 0,35
Gusseisen mit Kugelgraphit z. B. GGG50
ferritisch 540 120 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
perlitisch 850 95 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
Temperguss z. B. GTS70
ferritisch 450 125 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
perlitisch 780 97 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
n
Aluminium-Knetlegierungen z. B. AlMgSiPb; AlCuMg1; AMgSi1
nicht aushärtbar 200 450 0,10 - 0,19 0,17 - 0,27 0,27 - 0,35 0,33 - 0,40 0,36 - 0,43
aushärtbar, ausgehärtet 335 305 0,12 - 0,23 0,29 - 0,46 0,37 - 0,48 0,52 - 0,62 0,56 - 0,67
Aluminium-Gusslegierungen z. B. G-AlSi10Mg; G-ALSi12
≤ 12 % Si, ausgehärtet 250 450 0,20 - 0,38 0,31 - 0,50 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, aushärtbar, ausgehärtet 300 380 0,20 - 0,38 0,30 - 0,48 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, nicht aushärtbar 450 280 0,18 - 0,34 0,28 - 0,45 0,36 - 0,47 0,46 - 0,55 0,48 - 0,58
Kupfer und Kupferlegierungen(bronze / Messing)
Automatenlegierung, Pb >1 % 370 145 0,15 - 0,29 0,23 - 0,37 0,28 - 0,36 0,38 - 0,46 0,41 - 0,49
Messing, Rotguss 300 185 0,16 - 0,30 0,24 - 0,38 0,29 - 0,38 0,39 - 0,47 0,42 - 0,50
Aluminiumbronze 500 110 0,14 - 0,27 0,20 - 0,32 0,26 - 0,34 0,37 - 0,44 0,40 - 0,48
Kupfer und Elektrolytkupfer 200 120 0,05 - 0,10 0,09 - 0,14 0,10 - 0,13 0,16 - 0,19 0,19 - 0,23
nichtmetallische WerkstoffeDuroplaste
Die Schnittwerte sind abhängig von der vorhandenen Kühlung. Startwerte wie bei Aluminium-Knetlegierungen (Luftkühlung ist empfohlen).Faserverstärkte Kunststoffe
Hartgummi
SWarmfeste Legierungen / Superlegierungen z. B. Inconell, Hasteloy, Nimonic,
Waspaloy, Monel
Fe-Basis geglüht 700 32 0,08 - 0,12 0,10 - 0,13 0,12 - 0,15 0,14 - 0,17 0,14 - 0,18
Fe-Basis ausgehärtet 980 – – – – – –
Ni- oder Co-Basis geglüht 850 32 0,08 - 0,10 0,09 - 0,12 0,11 - 0,14 0,12 - 0,15 0,12 - 0,17
Ni- oder Co-Basis gegossen 1100 – – – – – –
ausgehärtet 1230 25 0,06 - 0,08 0,07 - 0,10 0,09 - 0,12 0,11 - 0,14 0,11 - 0,16
Titanlegierungen z. B. Ti99,5; Ti Al6V4; TiCu2
Reintitan 500 - 700 39 0,09 - 0,17 0,16 - 0,26 0,19 - 0,25 0,24 - 0,29 0,27 - 0,32
700 - 1050 34 0,09 - 0,17 0,14 - 0,22 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
hGehärteter Stahl
gehärtet und angelassen 1020 - 1365 44 0,09 - 0,17 0,14 - 0,22 0,22 - 0,29 0,25 - 0,30 0,28 - 0,34
gehärtet und angelassen 1365 - 1850 26 0,06 - 0,11 0,11 - 0,18 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
hartguss gegossen 1365 35 0,07 - 0,13 0,12 - 0,19 0,18 - 0,23 0,22 - 0,26 0,27 - 0,32
Gehärtetes Gusseisen gehärtet und angelassen 2090 – – – – – –
15Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
recommended cutting data ShArK-DrILL2
The recommended cutting data are only approximate values.It may be necessary to adjust them to each individual machining application.
ISo Material
Tens
ile s
tren
gth
Cutti
ng s
peed
Dia
-ran
ge
12 –
15 m
m
Dia
-ran
ge
15 –
18 m
m
Dia
-ran
ge
18 –
22 m
m
Dia
-ran
ge
22 –
27 m
m
Dia
-ran
ge
27 –
32 m
m
(N/mm2) (m/min) (mm/U) (mm/U) (mm/U) (mm/U) (mm/U)
P
Unalloyed steel and cast steel e. G. 9SMn28; 9SMnPb28; 10SPb20
up to 500 125 0,15 - 0,29 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
500 - 850 105 0,13 - 0,25 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
Structual steel e. G. St33; St37-2; St44-2; St52; St60
350 - 500 95 0,13 - 0,25 0,21 - 0,36 0,26 - 0,39 0,30 - 0,45 0,32 - 0,48
500 - 850 75 0,11 - 0,21 0,20 - 0,34 0,21 - 0,32 0,26 - 0,39 0,29 - 0,44
850 - 1200 70 0,09 - 0,17 0,17 - 0,29 0,20 - 0,30 0,22 - 0,33 0,26 - 0,39
none- and low alloy steel as well as carbon steel and case hardened steel e. G. C15; C22; 20Mn5; Ck45
bis 450 120 0,13 - 0,25 0,20 - 0,34 0,26 - 0,39 0,32 - 0,48 0,34 - 0,51
450 - 750 95 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
750 - 900 85 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
900 - 1100 70 0,09 - 0,17 0,15 - 0,26 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
Alloys steele. G. 42CrMo4; 16MnCr5; 36CrNiMo4
14NiCrMo13-4; Ck75; Ck101; 17CrNiMo8, 35CrMo4; 41Cr4; 50MnSi4
bis 600 100 0,13 - 0,25 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
600 - 800 90 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
800 - 950 85 0,11 - 0,21 0,15 - 0,26 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
950 - 110 75 0,09 - 0,17 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
1100 - 1250 65 0,07 - 0,13 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
high alloys steele. G. 41CrAlMo7; 36CrNiMo4;
32NiCrMo14-5
600 - 1000 60 0,11 - 0,21 0,15 - 0,26 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1000 - 1200 55 0,09 - 0,17 0,11 - 0,19 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1200 - 1350 50 0,07 - 0,13 0,09 - 0,15 0,17 - 0,26 0,20 - 0,30 0,23 - 0,35
Tool steele. G. C75W; 102Cr6; 105WCr6; X153CrMoV12
500 - 700 65 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
700 - 950 50 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
M Stainless steel andcast steel
austenitic and austenitic/ferritic 450 - 610 65 0,09 - 0,14 0,16 - 0,21 0,19 - 0,24 0,24 - 0,26 0,27 - 0,30
chilled 610 - 930 50 0,09 - 0,14 0,14 - 0,18 0,16 - 0,20 0,20 - 0,22 0,23 - 0,25
KCast iron e. G. GG25; GG40
pearlitic, ferritic 500 - 700 125 0,14 - 0,27 0,20 - 0,38 0,26 - 0,42 0,37 - 0,52 0,40 - 0,56
pearlitic, martensitic 700 - 850 95 0,10 - 0,19 0,16 - 0,30 0,19 - 0,30 0,26 - 0,36 0,29 - 0,41
pearlitic, martensitic 850 - 1100 85 0,10 - 0,19 0,14 - 0,27 0,16 - 0,26 0,22 - 0,31 0,25 - 0,35
Cast iron with nodular graphite e. G. GGG50
ferritic 540 120 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
pearlitic 850 95 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
Malleable cast iron e. G. GTS70
ferritic 450 125 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
pearlitic 780 97 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
n
Aluminium alloys, long chipping e. G. AlMgSiPb; AlCuMg1; AMgSi1
not heat treatable 200 450 0,10 - 0,19 0,17 - 0,27 0,27 - 0,35 0,33 - 0,40 0,36 - 0,43
heat treatable, heat - treated 335 305 0,12 - 0,23 0,29 - 0,46 0,37 - 0,48 0,52 - 0,62 0,56 - 0,67
Casted aluminium alloys e. G. G-AlSi10Mg; G-ALSi12
≤ 12 % Si, hardened 250 450 0,20 - 0,38 0,31 - 0,50 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, heat treatable, hardened 300 380 0,20 - 0,38 0,30 - 0,48 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, not heat treatable 450 280 0,18 - 0,34 0,28 - 0,45 0,36 - 0,47 0,46 - 0,55 0,48 - 0,58
Copper and copper alloys(brass / bronze)
Lead alloys, Pb >1 % 370 145 0,15 - 0,29 0,23 - 0,37 0,28 - 0,36 0,38 - 0,46 0,41 - 0,49
Brass, bronze 300 185 0,16 - 0,30 0,24 - 0,38 0,29 - 0,38 0,39 - 0,47 0,42 - 0,50
Aluminium bronze 500 110 0,14 - 0,27 0,20 - 0,32 0,26 - 0,34 0,37 - 0,44 0,40 - 0,48
Copper and electrolyte copper 200 120 0,05 - 0,10 0,09 - 0,14 0,10 - 0,13 0,16 - 0,19 0,19 - 0,23
non-ferrous materialsDuroplastics The cutting datas are depending on the available coolant supply.
Starting datas are the same as aluminium alloys, long chipping. Air coolant is recommended.
Re- inforced plastics
Hard rubber
Shigh temperature resistant alloys e. G. Inconell, Hasteloy, Nimonic,
Waspaloy, Monel
Fe-alloyed annealed 700 32 0,08 - 0,12 0,10 - 0,13 0,12 - 0,15 0,14 - 0,17 0,14 - 0,18
heat - treated 980 – – – – – –
Ni- or annealed 850 32 0,08 - 0,10 0,09 - 0,12 0,11 - 0,14 0,12 - 0,15 0,12 - 0,17
Co based casting 1100 – – – – – –
heat - treated 1230 25 0,06 - 0,08 0,07 - 0,10 0,09 - 0,12 0,11 - 0,14 0,11 - 0,16
Titanium alloys / Titan e. G. Ti99,5; Ti Al6V4; TiCu2
Pure titan 500 - 700 39 0,09 - 0,17 0,16 - 0,26 0,19 - 0,25 0,24 - 0,29 0,27 - 0,32
700 - 1050 34 0,09 - 0,17 0,14 - 0,22 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
hhardened steel
hardened and tempered 1020 - 1365 44 0,09 - 0,17 0,14 - 0,22 0,22 - 0,29 0,25 - 0,30 0,28 - 0,34
hardened and tempered 1365 - 1850 26 0,06 - 0,11 0,11 - 0,18 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
hard cast iron casting 1365 35 0,07 - 0,13 0,12 - 0,19 0,18 - 0,23 0,22 - 0,26 0,27 - 0,32
hardened cast iron hardened and tempered 2090 – – – – – –
16 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Parametri di taglio suggeriti ShArK-DrILL2
I dati indicati in tabella sono valori approssimati.Puo essere necessario adattarli alle singole applicazioni di lavorazione.
ISo Materiale
Caric
o di
rottu
ra
Velo
cità
di t
aglio
Gam
ma
12 –
15 m
m
Gam
ma
15 –
18 m
m
Gam
ma
18 –
22 m
m
Gam
ma
22 –
27 m
m
Gam
ma
27 –
32 m
m
(N/mm2) (m/min) (mm/U) (mm/U) (mm/U) (mm/U) (mm/U)
P
Acciaio non legato o da fusione p. e. 9SMn28; 9SMnPb28; 10SPb20
fino a 500 125 0,15 - 0,29 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
500 - 850 105 0,13 - 0,25 0,21 - 0,36 0,28 - 0,42 0,35 - 0,53 0,37 - 0,56
Acciaio da costruzione p. e. St33; St37-2; St44-2; St52; St60
350 - 500 95 0,13 - 0,25 0,21 - 0,36 0,26 - 0,39 0,30 - 0,45 0,32 - 0,48
500 - 850 75 0,11 - 0,21 0,20 - 0,34 0,21 - 0,32 0,26 - 0,39 0,29 - 0,44
850 - 1200 70 0,09 - 0,17 0,17 - 0,29 0,20 - 0,30 0,22 - 0,33 0,26 - 0,39
Acciaio non legato o debolmente legato, acciaio al carbonio o acciaio stampatop. e. C15; C22; 20Mn5; Ck45
bis 450 120 0,13 - 0,25 0,20 - 0,34 0,26 - 0,39 0,32 - 0,48 0,34 - 0,51
450 - 750 95 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
750 - 900 85 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,33 - 0,50
900 - 1100 70 0,09 - 0,17 0,15 - 0,26 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
Acciaio legatop. e. 42CrMo4; 16MnCr5; 36CrNiMo4
14NiCrMo13-4; Ck75; Ck101; 17CrNiMo8, 35CrMo4; 41Cr4; 50MnSi4
bis 600 100 0,13 - 0,25 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
600 - 800 90 0,11 - 0,21 0,17 - 0,29 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
800 - 950 85 0,11 - 0,21 0,15 - 0,26 0,21 - 0,32 0,31 - 0,47 0,34 - 0,51
950 - 110 75 0,09 - 0,17 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
1100 - 1250 65 0,07 - 0,13 0,13 - 0,22 0,20 - 0,30 0,26 - 0,39 0,29 - 0,44
Acciaio fortemente legato p. e. 41CrAlMo7; 36CrNiMo4;
32NiCrMo14-5
600 - 1000 60 0,11 - 0,21 0,15 - 0,26 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1000 - 1200 55 0,09 - 0,17 0,11 - 0,19 0,20 - 0,30 0,21 - 0,32 0,24 - 0,36
1200 - 1350 50 0,07 - 0,13 0,09 - 0,15 0,17 - 0,26 0,20 - 0,30 0,23 - 0,35
Acciaio da utensilip. e. C75W; 102Cr6; 105WCr6; X153CrMoV12
500 - 700 65 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
700 - 950 50 0,09 - 0,17 0,13 - 0,22 0,17 - 0,26 0,21 - 0,32 0,24 - 0,36
M Acciaio inossidabile ed acciaio da fusione
austenitico e austenitico / ferritico 450 - 610 65 0,09 - 0,14 0,16 - 0,21 0,19 - 0,24 0,24 - 0,26 0,27 - 0,30
temprato 610 - 930 50 0,09 - 0,14 0,14 - 0,18 0,16 - 0,20 0,20 - 0,22 0,23 - 0,25
KGhisa p. e. GG25; GG40
perlitica, ferritica 500 - 700 125 0,14 - 0,27 0,20 - 0,38 0,26 - 0,42 0,37 - 0,52 0,40 - 0,56
perlitica, martensitica 700 - 850 95 0,10 - 0,19 0,16 - 0,30 0,19 - 0,30 0,26 - 0,36 0,29 - 0,41
perlitica, martensitica 850 - 1100 85 0,10 - 0,19 0,14 - 0,27 0,16 - 0,26 0,22 - 0,31 0,25 - 0,35
Ghisa grigia sferoidale p. e. GGG50
ferritique 540 120 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
perlitica 850 95 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
Ghisa malleabile p. e. GTS70
ferritique 450 125 0,12 - 0,23 0,17 - 0,32 0,20 - 0,32 0,29 - 0,41 0,32 - 0,45
perlitica 780 97 0,10 - 0,19 0,14 - 0,27 0,18 - 0,29 0,26 - 0,36 0,29 - 0,41
n
Leghe di Alluminio a truciolo lungo p. e. AlMgSiPb; AlCuMg1; AMgSi1
non temprabile 200 450 0,10 - 0,19 0,17 - 0,27 0,27 - 0,35 0,33 - 0,40 0,36 - 0,43
temprabile, temprato 335 305 0,12 - 0,23 0,29 - 0,46 0,37 - 0,48 0,52 - 0,62 0,56 - 0,67
Leghe di Alluminio da getti p. e. G-AlSi10Mg; G-ALSi12
≤ 12 % Si, temprato 250 450 0,20 - 0,38 0,31 - 0,50 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, temprabile, temprato 300 380 0,20 - 0,38 0,30 - 0,48 0,40 - 0,52 0,48 - 0,58 0,50 - 0,60
≤ 12 % Si, non temprabile 450 280 0,18 - 0,34 0,28 - 0,45 0,36 - 0,47 0,46 - 0,55 0,48 - 0,58
rame e leghe di rame (ottone / bronzo)
Legate al piombo, Pb >1 % 370 145 0,15 - 0,29 0,23 - 0,37 0,28 - 0,36 0,38 - 0,46 0,41 - 0,49
Ottone / Bronzo 300 185 0,16 - 0,30 0,24 - 0,38 0,29 - 0,38 0,39 - 0,47 0,42 - 0,50
Bronzo alluminio 500 110 0,14 - 0,27 0,20 - 0,32 0,26 - 0,34 0,37 - 0,44 0,40 - 0,48
Rame e rame elettrolitico 200 120 0,05 - 0,10 0,09 - 0,14 0,10 - 0,13 0,16 - 0,19 0,19 - 0,23
Materiali non ferrosiPlastiche dure
I parametri di taglio dipendono dalla quantità di refrigerante disponibile. Come parametri di partenza utilizzare dati per leghe di alluminio a truciolo lungo.Plastiche rinforzate
Gomme dure
SLeghe esotiche resistenti alle alte temperaturre p. e. Inconell, Hasteloy, Nimonic,
Waspaloy, Monel
Fe-legate ricotto 700 32 0,08 - 0,12 0,10 - 0,13 0,12 - 0,15 0,14 - 0,17 0,14 - 0,18
temprato 980 – – – – – –
Ni o ricotto 850 32 0,08 - 0,10 0,09 - 0,12 0,11 - 0,14 0,12 - 0,15 0,12 - 0,17
Co legato stampato 1100 – – – – – –
temprato 1230 25 0,06 - 0,08 0,07 - 0,10 0,09 - 0,12 0,11 - 0,14 0,11 - 0,16
Leghe di titanio, Titanio p. e. Ti99,5; Ti Al6V4; TiCu2
Titanio puro 500 - 700 39 0,09 - 0,17 0,16 - 0,26 0,19 - 0,25 0,24 - 0,29 0,27 - 0,32
700 - 1050 34 0,09 - 0,17 0,14 - 0,22 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
hAcciaio temprato
temprato 1020 - 1365 44 0,09 - 0,17 0,14 - 0,22 0,22 - 0,29 0,25 - 0,30 0,28 - 0,34
temprato 1365 - 1850 26 0,06 - 0,11 0,11 - 0,18 0,16 - 0,21 0,22 - 0,26 0,25 - 0,30
Ghisa temprata stampato 1365 35 0,07 - 0,13 0,12 - 0,19 0,18 - 0,23 0,22 - 0,26 0,27 - 0,32
Ghisa temprata temprato 2090 – – – – – –
17Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Punte ARNO® AKB ad alte prestazioni. Una impressionante stabi-lità di taglio, ampi raggi inserto e ridotte forze assiali di taglio ga-rantiscono una elevata efficienza di lavoro con elevate velocità di avanzamento. Le punte AKB offrono inoltre affidabilità di produ-zione grazie ad inserti robusti, ideali per forature su tagli interrotti e su piani inclinati.
Il taglio al centro rimane robusto e la finitura del foro non lascia segni di uscita.
With features such as strong insert cutting edges and corner radi-us, soft cutting action and high feed rate potential the ARNO® AKB drill offers fantastic productivity prospects. The drill is excel-lent for interrupted cutting and drilling out chambers.
The AKB drill deflects positively on impact and therefore leaves no retraction marks.
Arno® AKb
Die hochleistungsfähigen AKb-bohrer überzeugen durch sta-bile Schneidkanten und eckradien, geringe Axialkräfte und einer enormen Wirtschaftlichkeit dank hoher Vorschubwerte. Zudem bieten Ihnen AKb-bohrer eine hohe Prozesssicherheit durch ihre stabilen Wendeschneidplatten und sind ideal für Schnittunterbrechungen und Auskesselungen.
Profitieren Sie außerdem von unempfindlichen Zentrums-schneiden und einer positiven Abdrängung, die keine rückzugsstreifen verursacht.
Arno® Kurzlochbohrer AKbARNO® Short-hole drill AKBARNO® Sistema di foratura AKB
18 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Mit den neuen AKb5 komplettieren wir unser Kurzloch-bohrer-Programm um bohrtiefen bis 5 x D. Zusätzlich bieten wir Ihnen bei AKb2 und AKb3 innerhalb der gängigen Durchmesser weitere bohrer bis Ø 55 mm.
With the new AKB5 we have added drills with drill depth potential up to 5 x D. Furthermore we now offer drills up to 55 mm diameter in the AKB2 and AKB3 range.
Per migliorare l’evacuazione truciolo, le eliche di scarico sono appositamente studiate. Con la nuova AKB5 il programma viene ampliato fino a lunghezze 5 x D. Ulteriore ampliamento gamma sui diametri disponibili nelle verisoni AKB2 ed AKB3 fino a diametro 55 mm.
Arno® AKb
• AKB2 – Ø 46 bis 55 mm (im Standardprogramm von Ø 14 bis 55 mm)
• AKB3 – Ø 46 bis 55 mm (im Standardprogramm von Ø 14 bis 55 mm)
• Neue Wendeschneidplatte XDMT 15… in Geometrien -bS, -bM, -br (beschichtet) und -bAL (unbeschichtet)
• Neue AKB5 (5 x D) – Ø 17 bis 35 mm
• AKB2 – Ø 46 – 55 mm (standard range from Ø 14 – 55 mm)
• AKB3 – Ø 46 – 55 mm (standard range from Ø 14 – 55 mm)
• New inserts XDMT 15… in geometries -BS,-BM, -BR and -BAL / coated and uncoated
• New AKB5 (5 x D) – Ø 17 – 35 mm
• AKB2 – Ø 46 fino a Ø 55 mm (programma standard ora da Ø 14 mm a Ø 55 mm)
• AKB3 - Ø 46 fino a Ø 55 mm (programma standard ora da Ø 14 mm a Ø 55 mm)
• Nuova dimensione inserto XDMT 15… nelle geometrie -BS, -BM, -BR (rivestite) e -BAL (non rivestita)
• Nuova AKB5 (5 x D) – da Ø 17 fino a Ø 35 mm
Alle neuheiten in der Übersicht / Overview of all news / Tutte le novità in sintesi
19Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
2 × D / 3 × D
xD2
xD3
✓mit IKwith iccon icDIN ISO 9766
bezeichnung Designation Articolo
D l l2 l3 dA PG34Wendeschneidplatte
Insert Inserto
neuerung / News / Novità
AKb2-4600r40-15 46 127 92 70 40 XDMT 15…
neue Durchmesser AKb2: Ø 46 – 55 mm
New diameter AKB2: Ø 46 – 55 mm
Nuevo diametro AKB2: Ø 46 – 55 mm
AKb2-4700r40-15 47 129 94 70 40 XDMT 15…AKb2-4800r40-15 48 131 96 70 40 XDMT 15…AKb2-4900r40-15 49 133 98 70 40 XDMT 15…AKb2-5000r40-15 50 135 100 70 40 XDMT 15…AKb2-5100r40-15 51 137 102 70 40 XDMT 15…AKb2-5200r40-15 52 139 104 70 40 XDMT 15…AKb2-5300r40-15 53 141 106 70 40 XDMT 15…AKb2-5400r40-15 54 143 108 70 40 XDMT 15…AKb2-5500r40-15 55 145 110 70 40 XDMT 15…
AKb3-4600r40-15 46 173 138 70 40 XDMT 15…
neue Durchmesser AKb3: Ø 46 – 55 mm
New diameter AKB3: Ø 46 – 55 mm
Nuevo diametro AKB3: Ø 46 – 55 mm
AKb3-4700r40-15 47 176 141 70 40 XDMT 15…AKb3-4800r40-15 48 179 144 70 40 XDMT 15…AKb3-4900r40-15 49 182 147 70 40 XDMT 15…AKb3-5000r40-15 50 185 150 70 40 XDMT 15…AKb3-5100r40-15 51 188 153 70 40 XDMT 15…AKb3-5200r40-15 52 191 156 70 40 XDMT 15…AKb3-5300r40-15 53 194 159 70 40 XDMT 15…AKb3-5400r40-15 54 197 162 70 40 XDMT 15…AKb3-5500r40-15 55 200 165 70 40 XDMT 15…
Kurzlochbohrer Arno® AKbShort hole drills Sistemi di foratura
hinweis: Trägerwerkzeuge werden mit 2 Klemmschrauben und Schlüssel geliefert.Remark: Holders will be supplied with clamping screws and key.Nota: L’utensile é fornito completo di vite e chiave.
20 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
5 × D
l2
Ø d
4
l3
l
D
xD5
✓mit IKwith iccon icDIN ISO 9766
bezeichnung Designation Articolo
D l l2 l3 dA PG34Wendeschneidplatte
Insert Inserto
neuerung / News / Novità
AKb5-1700r20-05 17 103 85 44 20 XDMT 05…
neue AKb5 (5 x D): Ø 17 – 35 mm
New AKB5 (5 x D): Ø 17 – 35 mm
Nuevo AKB5 (5 x D): Ø 17 – 35 mm
AKb5-1800r25-05 18 108 90 56 25 XDMT 05…AKb5-1900r25-06 19 113 95 56 25 XDMT 06…AKb5-2000r25-06 20 118 100 56 25 XDMT 06…AKb5-2100r25-06 21 123 105 56 25 XDMT 06…AKb5-2200r25-06 22 128 110 56 25 XDMT 06…AKb5-2300r25-07 23 136 115 56 25 XDMT 07…AKb5-2400r25-07 24 141 120 56 25 XDMT 07…AKb5-2500r25-07 25 146 125 56 25 XDMT 07…AKb5-2600r32-07 26 153 130 60 32 XDMT 07…AKb5-2700r32-07 27 158 135 60 32 XDMT 07…AKb5-2800r32-07 28 163 140 60 32 XDMT 07…AKb5-2900r32-09 29 173 145 60 32 XDMT 09…AKb5-3000r32-09 30 178 150 60 32 XDMT 09…AKb5-3100r32-09 31 183 155 60 32 XDMT 09…AKb5-3200r32-09 32 188 160 60 32 XDMT 09…AKb5-3300r32-09 33 193 165 60 32 XDMT 09…AKb5-3400r32-09 34 198 170 60 32 XDMT 09…AKb5-3500r32-09 35 203 175 60 32 XDMT 09…
Kurzlochbohrer Arno® AKbShort hole drills Sistemi di foratura
hinweis: Trägerwerkzeuge werden mit 2 Klemmschrauben und Schlüssel geliefert.Remark: Holders will be supplied with clamping screws and key.Nota: L’utensile é fornito completo di vite e chiave.
21Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Wendeschneidplatten Arno® AKbInserts Inserti
XDMT
P l
M l
K l
n l l
S l
h
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
Schrauben und Schraubendreher / Screws and Screwdrivers / Chiavi e Viti
PG 36
beschichtetcoated rivestito
unbeschichtetuncoated
non rivestito
bezeichnung Designation Articolo
l d s d1 r
AK50
20
AP50
30
AK10
10
neuerung / News / Novità
XDMT 156012en-bS 17,32 15,70 6,0 6,5 1,2
Wendeschneidplatten für große Durchmesser
Inserts for larger diameters
Inserti per grandi diametri
XDMT 156012en-bM 17,32 15,70 6,0 6,5 1,2
XDMT 156012en-br 17,32 15,70 6,0 6,5 1,2
XDMT 156012en-bAL 17,32 15,70 6,0 6,5 1,2
WendeschneidplatteInsertInserti
KlemmschraubeScrewVite
PG 11max. Anzugsmoment
Torque max.Forza di serragio max.
SchlüsselKey
ChiavePG 11
XDMT 15… SS 4115 5,5 Nm T5125
22 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
empfohlene Schnittwerte Arno® AKbRecommended cutting data Parametri di taglio suggeriti
Schnittwertempfehlung 5 x D
ISo Werkstoff
Zugf
estig
keit
(N
/mm
2 )
Geom
etrie
Sorte
Schn
ittge
- sc
hwin
digk
eit
V C (m
/min
) Vorschub f (mm / U)
17,0 – 29,0 mm 30,0 – 36,0 mm
P
Automatenstähle und baustähle
440 – – – – –
670 – – – – –
880 BM AP5030* 125 – 170 – 230 0,09 – 0,11 0,09 – 0,12
980 BM AP5030* 125 – 170 – 230 0,10 – 0,14 0,11 – 0,15
1050 BM AP5030* 100 – 130 – 170 0,09 – 0,11 0,09 – 0,12
Unleg. und niedrig legierter Stahlbeinhaltet auch Vergütungsstähle und einsatzstähle, legierter Stahl
640
970 BM AP5030* 125 – 150 – 200 0,09 – 0,11 0,09 – 0,12
1050 BM AP5030* 100 – 140 – 170 0,09 – 0,11 0,09 – 0,12
1230 BM AP5030* 80 – 120 – 150 0,09 – 0,11 0,09 – 0,12
hochlegierter und hochfester Stahl,Werkzeugstähle
700 – – – – –
1140 BM AP5030* 80 – 120 – 160 0,09 – 0,11 0,09 – 0,12
KGrauguss
640 BR AK5020 120 – 160 – 200 0,17 – 0,23 0,18 – 0,25
910 BR AK5020 120 – 160 – 200 0,17 – 0,23 0,18 – 0,25
Gusseisen mit Kugelgraphit, Temperguss
560 BR AK5020 90 – 120 – 250 0,17 – 0,23 0,18 – 0,25
880 BR AK5020 90 – 120 – 150 0,17 – 0,23 0,18 – 0,25
nAluminium-KnetlegierungenAluminium-Gusslegierungen – BAL AK1010 200 – 260 – 320 0,10 – 0,15 0,11 – 0,16
Kupfer und Kupferlegierungen(bronze / Messing) – BAL AK1010 180 – 230 – 280 0,10 – 0,15 0,11 – 0,16
* 2. Wahl: AP5020Die Tabellenwerte sind Richtwerte. Es kann notwendig sein, die Werte den jeweiligen Bearbeitungsumständen anzupassen.
recommendations 5 x D
ISo Material
Toug
hnes
s
(N/m
m2 )
Geom
etry
Grad
e
Cutti
ng s
peed
V C
(m/m
in) Feed rate f (mm / U)
17.0 – 29.0 mm 30.0 – 36.0 mm
P
Carbon steel
440 – – – – –
670 – – – – –
880 BM AP5030* 125 – 170 – 230 0.09 – 0.11 0.09 – 0.12
980 BM AP5030* 125 – 170 – 230 0.10 – 0.14 0.11 – 0.15
1050 BM AP5030* 100 – 130 – 170 0.09 – 0.11 0.09 – 0.12
Low alloyed steel
640
970 BM AP5030* 125 – 150 – 200 0.09 – 0.11 0.09 – 0.12
1050 BM AP5030* 100 – 140 – 170 0.09 – 0.11 0.09 – 0.12
1230 BM AP5030* 80 – 120 – 150 0.09 – 0.11 0.09 – 0.12
high alloyed steel700 – – – – –
1140 BM AP5030* 80 – 120 – 160 0.09 – 0.11 0.09 – 0.12
KCast iron (GG)
640 BR AK5020 120 – 160 – 200 0.17 – 0.23 0.18 – 0.25
910 BR AK5020 120 – 160 – 200 0.17 – 0.23 0.18 – 0.25
nodular cast iron (GGG)560 BR AK5020 90 – 120 – 250 0.17 – 0.23 0.18 – 0.25
880 BR AK5020 90 – 120 – 150 0.17 – 0.23 0.18 – 0.25
n Aluminium alloy – BAL AK1010 200 – 260 – 320 0.10 – 0.15 0.11 – 0.16
Copper alloy – BAL AK1010 180 – 230 – 280 0.10 – 0.15 0.11 – 0.16
* Second choice: AP5020The recommended cutting data are only approximate values. It may be necessary to adjust them to each individual machining application.
23Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Weitere Informationen und Details zum AKb Kurzlochbohrer finden Sie im Arno® Katalog „Werkzeuge und Wendeschneidplatten zum bohren“ Kapitel 3.For more information about the AKB drills please see our ARNO® catalogue “Drilling tools and indexable inserts for drilling” chapter 3.Per ulteriori informazioni sul sistema di foratura AKB consultare il nuovo catalogo “Utensili ed inserti di Foratura” Capitolo 3.
Parametri di taglio 5 x D
ISo Materiale
resis
tenz
a
(N/m
m2 )
Geom
etria
Qual
ità
Velo
cità
di
tagl
io
V C (m
/min
) Avanzamento f (mm / U)
17,0– 29,0 mm 30,0 – 36,0 mm
P
Acciai automatici e debolmente legati
440 – – – – –
670 – – – – –
880 BM AP5030* 125 – 170 – 230 0,09 – 0,11 0,09 – 0,12
980 BM AP5030* 125 – 170 – 230 0,10 – 0,14 0,11 – 0,15
1050 BM AP5030* 100 – 130 – 170 0,09 – 0,11 0,09 – 0,12
Acciai debolmente legati, legati, acciai da fusione, acciai da bonifica
640
970 BM AP5030* 125 – 150 – 200 0,09 – 0,11 0,09 – 0,12
1050 BM AP5030* 100 – 140 – 170 0,09 – 0,11 0,09 – 0,12
1230 BM AP5030* 80 – 120 – 150 0,09 – 0,11 0,09 – 0,12
Acciai Fortemente legati, acciai da costruzione, acciai stampati
700 – – – – –
1140 BM AP5030* 80 – 120 – 160 0,09 – 0,11 0,09 – 0,12
KGhise grigie
640 BR AK5020 120 – 160 – 200 0,17 – 0,23 0,18 – 0,25
910 BR AK5020 120 – 160 – 200 0,17 – 0,23 0,18 – 0,25
Ghisa sferoidale, ghise temprate560 BR AK5020 90 – 120 – 250 0,17 – 0,23 0,18 – 0,25
880 BR AK5020 90 – 120 – 150 0,17 – 0,23 0,18 – 0,25
n Alluminio e relative leghe – BAL AK1010 200 – 260 – 320 0,10 – 0,15 0,11 – 0,16
rame, leghe di rame (ottone, bronzo) – BAL AK1010 180 – 230 – 280 0,10 – 0,15 0,11 – 0,16
* 2. Scelta: AP5020I parametri di taglio sono indicativi e riferiti a condizioni di taglio e di lavoro ottimali. A seconda delle condizioni di lavoro (staffaggio, rigidità di macchina e pezzo, qualità del refrigerante etc...) può essere necessario adattare tali valori.
empfohlene Schnittwerte Arno® AKbRecommended cutting data Parametri di taglio suggeriti
Arno−SerVICeS
Konstruktion, Produktion und Vertrieb unter einem Dach. Das ist die perfekte Verbindung, um Ihnen
Standard- und Sonderprodukte schnell und
hochwertig anbieten zu können.
95 % der Standardprodukte sind sofort
verfügbar: bei bestellung bis 18 Uhr erhalten
Sie Ihre Produkte bereits am nächsten Tag.
Mit großer fachlicher Kompetenz betreut Sie
unser Außendienst-Team, unsere Anwendungs-
techniker helfen Ihnen mit Spezialwissen
gerne auch vor ort.
To have design, production and service all under one roof is the perfect way of providing standard and
special products.
95 % of the standard programme is available
from stock. Order received before 18.00 CET
are dispatched the very same day and in most
cases supplied next day.
Our competent team of technical sales engi-
neers will be available to support you on site.
Costruzione, Produzione e Distribuzione sotto un unico tetto.La sequenza perfetta per garantire un servizio
di supporto cliente su prodotti Standard e
Speciali di alta qualità.
Il 95 % dei prodotti Standard sono disponibili
a stock; con ordini entro le 18:00 garantiamo
la consegna il giorno successivo.
Il nostro team di vendita altamente qualifi cato
si offre come supporto alla produzione presso
i nostri clienti direttamente sul territorio.
Schnell, fl exibel und individuell.Quick, fl exible and individual.Veloce, fl essibile e individuale.
VerTrIebDISTRIBUTION
DISTRIBUZIONE
AnWenDUnGSTeChnIKTECHNICAL ADVISORY
SERVIZIO TECNICO
KonSTrUKTIonCONSTRUCTIONCOSTRUZIONE
ProDUKTIonPRODUCTIONPRODUZIONE
Weitere Informationen fi nden Sie unter: For more information see:
Altre informazioni su:
www.arno.de
25Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Mit dem Multifunktionswerkzeug ShArK-CUT® können Sie sowohl bohren als auch drehen! Das Werkzeug erzeugt einen ebenen bohrungsgrund und eignet sich je nach Ausführung für das bohren ins Volle, Drehen von Plan-, Innen- und Außenkonturen.
Für Durchmesser von 4 – 50 mm ist er als Vollhart-metallvariante oder mit ein-, zwei- oder dreischneidigen Wendeschneidplatten ein kostensparendes, aber leistungsstarkes Werkzeug.
Con l’utensile multi-funzione SHARK-CUT® è possibile sia forare che tornire! L’utensile realizza un fondo del foro piano durante la foratura. E‘ poi possibile barenare, sfacciare, smussare e tornire esternamente.
Per diametri da 4 a 50 mm, esiste in metallo duro integrale o ad inserti per diametri maggiori. Vi sono poi versioni a due o tre taglienti per barenare o lamare.
With the multifunctional SHARK-CUT® tool you can drill and turn. The tool produces a flat bottom in the hole and is, depending on version, suitable for drilling, boring, turning and facing.
The tool is available from 4 – 50 mm and depending on diameter and application supplied as either solid carbide, one, two or three fluted indexable tool. No matter which version, this tool can prove most cost efficient.
ShArK-CUT®
Arno® Multifunktionswerkzeug ShArK-CUT®
ARNO® Multi purpose tool SHARK-CUT®
ARNO® Utensile multifunzione SHARK-CUT®
neben den bisherigen, bewährten Sorten besteht das erweiterte ShArK-CUT®- Programm aus drei neuen, beschichteten hochleistungs- und Mehrbereichssorten, die alle Materialien der ISo-Werkstoff-gruppen P, M, K und S abdecken. Die Sorten AP2225 und AP2235 für die Stahlbearbeitung weisen stabile Schneid-kanten und eine hohe Wärmebeständig-keit auf. Für die Universalanwendung ist die Sorte AM4130 erhältlich. Die neu konzipierten Wendeschneidplatten sind in ihrer Stabilität optimiert. Für die bes-sere Übertragung des Anzugsmoments kommen Torx Schrauben zum einsatz. Sie bieten dem Anwender mehr Sicher-heit im handling. Die glatte oberfläche der beschichtungen weisen weniger reibungs widerstand auf und lassen somit die Späne optimal abgleiten. Die hohe härte der oberfläche schützt vor Abrasionsverschleiß.
Ihre Vorteile: • Neue Hochleistungs- und
Mehrbereichssorten• Stabilitätsoptimierte Werkzeuge • Sehr harte Oberfläche der Beschich-
tung
In addition to the already proven carbide grades, the SHARK-CUT® product range has been extended with three new high performance and multipurpose coatings which cover all the ISO material groups, P, M, K and S. The grades AP2225 and AP2235 for steel machining have stable cutting edges and are highly heat resist-ant. AM4130 is ideal for stainless steel and high temperature alloys. The smooth nickel plating of the tool reduces friction and thereby improved swarf evacuation, the hardness of the tool reduces abrasion wear.
Your benefits: • New high performance and multipur-
pose grades• Improved insert stability • Hard surface coating
In aggiunta alle attuali qualità, il sistema ARNO® SHARK-CUT® viene ora ampliato nella gamma di Qualità disponibili ed otti-mizzate secondo le più moderne tecnologie per completare tutte le applicazioni per lavorazioni di materiali di classi ISO P, M, K ed S. Le Qualità AP2225 ed AP2235 sono dedicate alla lavorazione di acciai in condizioni stabili di lavoro e dove si svilup-pa molto calore. Anche la qualità M4130, specifica per la lavorazione di acciai inossi-dabili e leghe resistenti al calore, presenta una migliorata stabilità del tagliente in tutte le condizioni di lavoro. Le superfici lucide degli inserti riducono l’attrito e lo sviluppo di calore migliorando anche la formazione del truciolo. I rivestimenti di ultima genera-zione migliorano ulteriormente la resistenza alla abrasione.
I vantaggi: • Aumento di gamma • Migliore stabilità del tagliente • Migliore resistenza all’usura
Die neuen ShArK-CUT® WendeschneidplattenThe new SHARK-CUT® insertsI nuovi inserti ARNO® SHARK-CUT®
AP2225 + AP2235
Sorten für die Zerspanung von Stahlwerkstoffen
Grades for machining steel and cast materials
Qualità per lavorazioni di acciai e ghise acciaiose
AM4130
Universelle Sorte für die bearbeitung von rostfreien Stählen und
hochwarmfesten Legierungen
Grade for machining stainless steel and high temperature alloys
Qualità universale per lavorazioni di acciai inossidabili e leghe resistenti al calore
26 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
ShArK-CUT®
27Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
ergebnisse aus der Praxis ShArK-CUT®
Test result Esempi pratici
Aus der Praxis für die Praxis Engineering for the engineerDalla pratica per la pratica
Durch seine Mehrfachnutzung in Kombi-nation mit den neuen Sorten hat sich der ShArK-CUT® auch in der Praxis bestens bewährt:
Was sagen unsere Kunden über den ShArK-CUT®:
„Wir sparen viel Zeit durch weniger Werkzeugwechsel, kürzere rüstzeiten und die geringere Programmierung. Das macht dieses Werkzeug so effizient.“
„250 % Standzeiterhöhung mit der neuen Sorte AM4130 – das probieren wir gleich bei anderen Werkstücken aus!“
„Der ebene bohrungsgrund beim Aus-drehen gleich nach dem bohren mit dem ShArK-CUT® schenkt uns einen weite-ren Werkzeugplatz auf dem revolver. Außerdem können wir uns auf eine kons-tante Leistung verlassen.“
ShArK-CUT® – mit den neuen Sorten Schnittgeschwindigkeiten, Vorschübe und Spantiefen beim Drehen und bohren erhöhen.
With its multi functionality and the new carbide grades, SHARK-CUT® has proven itself in many applications.
What do our customers say about SHARK-CUT®:
“We save a lot of time on tool changing, one tool does several applications and that’s what is making it so efficient.”
“250 % increased tool life with the new grade AM4130, we will be applying it on other components, too.”
“The flat bottom we can create with the SHARK-CUT® gives us more space in the turret and the tool is very reliable.”
SHARK-CUT® with the new grades, in-crease cutting speed, feed rates and depth of cut when turning and drilling.
Grazie alle possibilità di impiego multiplo ed alle nuove Qualità, il sistema ARNO® SHARK-CUT® si è dimostrato perfettamen-te idoneo in diverse applicazioni.
Cosa dicono i nostri clienti in merito al nuovo ampliamento gamma:
“Risparmio un sacco di tempo con un minor numero di cambi utensile, tempi di avviamento più brevi e minore programma-zione. E’ un prodotto veramente efficace.”
“Aumento del 250 % della vita inserto con la nuova qualità AM4130, ed è costante su tutti i pezzi!”
“Il fondo piano del foro non è più una lavorazione noiosa e lunga. Inoltre abbia-mo ora una posizione libera sulla torretta. Le nuove qualità ci garantiscono anche prestazioni costanti e durature.”
SHARK-CUT® – Con le nuove Qualità au-mentare velocità di taglio, velocità di avan-zamento e per la barenatura, la profondità di passata.
hydraulik / Hydraulic / Raccordo idraulico
Innenbearbeitung: Kontur ausdrehen / Internal boring of contour / Tornitura interna: Barenatura a profiloVc = 100 m/min ap = 2,5 mm f = 0,03 mm SC16R-0036SP-08LPnT 080304en AM4130emulsion / Emulsion / Emulsione
Standzeit Wettbewerb / Competitor tool life / Durata concorrente
11 min = 20 Werkstücke / components / pezzi
Standzeit / Tool life / Durata Arno®
35 min = 70 Werkstücke / components / pezzi
Kommentar: • Material X6CrNiMoTi17-12-2 • Bearbeitung optimiert • Erhöhung der Standzeit /
Standmenge um 250 %
Comment:• Material X6CrNiMoTi17-12-2
(1.4571 Austenitic stainless steel)• Improved process • Increased tool life and number of
components up 250 %
note: • Materiale X6CrNiMoTi17-12-2 • Ottimizzazione ciclo di lavoro • Migliorata vita inserto del 250 %
Praxistest / Test / Esempio di lavorazione
28 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Schneideinsatz / Insert / Inserti
rechte Ausführung abgebildetRight-hand execution shown
Versione Destra in figura
4,0 -8,0 mm xD2,25
✓mit IKwith iccon ic
PG 19beschichtet
coated rivestito
bezeichnung Designation Articolo
D l l2 dA f r
AL35
0
neuerung / News / Novità
SC06r-013SP-r0,40 2,25 x D 6 38 13,50 8 3,0 0,4
neu 2,25 x D – r 0,4New 2,25 x D – R 0,4
Nuevo 2,25 x D – R 0,4
P l
M l
KnSh
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
Vollhartmetall-Schneideinsatz ShArK-CUT® MiniSolid carbide cutterUtensile in Metallo Duro
Weitere Informationen und Details zum Schneidplattenbohrer ShArK-CUT® finden Sie im Arno® Katalog „Werkzeuge und Wendeschneidplatten zum bohren“ Kapitel 4.For more information about the SHARK-CUT® please see our ARNO® catalogue “Drilling tools and indexable inserts for drilling” chapter 4.Per ulteriori informazioni sul sistema SHARK-CUT® consultare il nuovo catalogo “Utensili ed inserti di Foratura” Capitolo 4.
29Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Sortenbeschreibung ShArK-CUT®
Grade descriptionDescrizione delle Qualità
hartmetall beschichtet / Carbide grade coated / Metallo duro rivestitoAM4130PVD-Mehrlagenbeschichtung Die universell einsetzbare Sorte ist die erste Wahl für die bearbeitung von rost-freiem Stahl und hochwarmfesten Legie-rungen. Sie überzeugt mit sehr guten Leistungen und zeichnet sich durch ihr breites einsatzspektrum, höchste Zähig-keit sowie eine exzellente Verschleißfes-tigkeit aus.
AP2225CVD-Mehrlagenbeschichtung Verschleißfeste Sorte für Stahl und Guss-werkstoffe bei stabilen Verhältnissen und hohen Schnittgeschwindigkeiten. Die Sorte AP2225 weist eine stabile Schneid-kante auf und besticht durch höchste Wärme beständigkeit.
AP2235CVD-Mehrlagenbeschichtung Die zuverlässige Wahl für die bearbei-tung von Stahl- und Gusswerkstoffen bei instabilen Verhältnissen. Die Sorte AP2235 hat eine höchst stabile Schneid-kante und besticht durch ein sehr zähes Grundsubstrat.
PVD multilayer coating Universal and first choice for machining stainless steel and high temperature alloys. Wide application area, very tough and with excellent wear resistance.
CVD multilayer coating Wear resistant grade for steel and cast materials in stable machining conditions and for high cutting speed. Strong cutting edge and high heat resistance.
CVD multilayer coating The reliable choice for machining steel and cast materials under less stable ma-chining conditions. The grade has strong cutting edge preparation and is very tough.
Rivestimento multistrato PVD La Qualità universale scelta per la lavora-zione di acciaio inossidabile e leghe ad alta temperatura. Garantisce ottimi risultati e si distingue per la sua vasta gamma di applicazioni, grazie ad una elevata durezza e ad una eccellente resistenza all’usura.
Rivestimento multistrato CVD Grado resistente all’usura per acciaio e ghisa in condizioni stabili ed elevate velocità di taglio. La Qualità AP2225 ha un tagliente robusto e offre la massima resistenza al calore.
Rivestimento multistrato CVD La scelta affidabile per lavorazione di acciaio e fusioni in condizioni instabili. La Qualità AP2235 ha un tagliente estre-mamente robusto con un substrato di base molto duro.
Weitere Informationen und Details zum Schneidplattenbohrer ShArK-CUT® finden Sie im Arno® Katalog „Werkzeuge und Wendeschneidplatten zum bohren“ Kapitel 4.For more information about the SHARK-CUT® please see our ARNO® catalogue “Drilling tools and indexable inserts for drilling” chapter 4.Per ulteriori informazioni sul sistema SHARK-CUT® consultare il nuovo catalogo “Utensili ed inserti di Foratura” Capitolo 4.
30 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
Wendeschneidplatten ShArK-CUT®
Inserts Inserti
PG 33beschichtet
coated rivestito
bezeichnung Designation Articolo
I d ➊ s r d1
AM41
30
AP22
25
AP22
35 neuerung / News / Novità
LPnT 040104eL* 4,0 4,5 1,80 0,40 2,1
neue Sorten New grades
Nuova qualità
LPnT 040104er* 4,0 4,5 1,80 0,40 2,1
LPnT 050204en 5,0 5,8 2,10 0,40 2,25
LPnT 060204en 6,0 6,5 2,38 0,40 2,5
LPnT 070304en 7,0 7,6 3,18 0,40 2,8
LPnT 080304en 8,0 8,5 3,18 0,40 3,4
LPnT 09T304en 9,0 9,6 3,97 0,40 3,4
LPnT 10T304en 10,0 10,6 3,97 0,40 4,4
LPnT 130404en 12,5 13,5 4,76 0,40 5,3
LPnT 130408en 12,5 13,5 4,76 0,80 5,3
LPnT 170508en 16,0 17,5 5,56 0,80 5,3
LPnT 080304en-WI 8,0 8,5 3,18 0,4 3,40 neue Sorten / New grades
Nuova qualitàLPnT 09T304en-WI 9,0 9,6 3,97 0,4 3,40
LPnT 10T304en-WI 10,0 10,6 3,97 0,4 4,40
LPnT
P l l l
M l l l
K l l
nS l
h
* rechter halter / rechte Wendeschneidplatte Right-hand holder / Right-hand indexable insert Utensile Destro / Inserto Destro
➊ Maß „d“ gemessen auf höhe Maß „s“ Dimension “d” measured to heigth “s” Dimensione “d” misurata ad altezza “s”
l hauptanwendung Main application Applicazione principale
l nebenanwendung Secondary application Applicazione secondaria
ISo Werkstoff
Zugf
estig
keit
(n/m
m2 )
Schnittgeschwindigkeit VC (m/min)
P
Unlegierter Stahl und Stahlguss
< 0,15 % C / vergütet 350
0,15 – 0,45 % C / vergütet 650
> 0,45 % C / vergütet 1000
niedrig legierter Stahl und Stahlguss
geglüht 600
vergütet900
1200
hochlegierter Stahl geglüht 700
hochlegierter Werkzeugstahl und Stahlguss gehärtet und angelassen 1100
nichtrostender Stahl ferritisch, geglüht 700
Stahlguss martensitisch, vergütet 1000
M nichtrostender Stahlaustenitisch und austenitisch / 450 – 600
ferritisch, abgeschreckt 600 – 900
K
Grauguss
perlitisch / ferritisch 500 – 700
perlitisch / martensitisch700 – 850
800 – 1100
Gusseisen mit Kugelgraphitferritisch 550
perlitisch 800
Tempergussferritisch 450
perlitisch 750
n
Aluminium-Knetlegierungennicht aushärtbar 200
aushärtbar, ausgehärtet 350
Aluminium-Gusslegierungen
≤ 12 % Si, ausgehärtet 250
≤ 12 % Si, aushärtbar, ausgehärtet 300
≤ 12 % Si, nicht aushärtbar 450
Kupfer und Kupferlegierungen(bronze / Messing)
Automatenlegierung, Pb > 1 % 400
Messing, Rotguss 300
Aluminiumbronze 500
Kupfer und Elektrolytkupfer 200
nichtmetallische Werkstoffe
Duroplaste –
Faserverstärkte Kunststoffe –
Hartgummi –
SWarmfeste Legierungen
Fe-Basis, geglüht 700
Fe-Basis, ausgehärtet 950
Ni- oder Co-Basis, geglüht 800
Ni- oder Co-Basis, gegossen 1100
Ni- oder Co-Basis, ausgehärtet 1200
Titanlegierungen Rein-Titan 500 – 700
Alpha+beta-Legierungen ausgehärtet 700 – 1000
hGehärteter Stahl gehärtet und angelassen
55 HRC
60 HRC
hartguss gegossen 41 HRC
Gehärtetes Gusseisen gehärtet und angelassen 55 HRC
Die Tabellenwerte sind Richtwerte. Es kann notwendig sein, die Werte den jeweiligen Bearbeitungsumständen anzupassen.
31Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
beschichtet
AM41
30
AP22
25
AP22
35
120 - 250 150 - 300 140 - 280
80 - 180 120 - 220 100 - 200
50-130 70-160 50-150
80 - 180 120 - 220 100 - 200
60 - 150 100 - 180 80 - 160
60 - 120 80 - 140 70 - 130
80 - 170 110 - 190 100 - 180
50 - 130 70 - 150 60 - 140
50 - 200 110 - 220 100 - 200
50 - 150 100 - 180 80 - 150
50 - 180 100 - 200 100 - 180
50 - 130 – –
120 - 200 130 - 280 120 - 250
100 - 180 130 - 280 120 - 250
80-230 110-220 100-200
120 - 200 120 - 280 110 - 250
100 - 180 120 - 280 110 - 250
90 - 160 110 - 280 100 - 250
70 - 150 110 - 280 100 - 250
80 - 2000 – –
80 - 1500 – –
80 - 1500 – –
80 - 1300 – –
80 - 600 – –
80 - 400 – –
80 - 400 – –
80 - 300 – –
80 - 200 – –
60 - 160 – –
50 - 140 – –
80 - 200 – –
20 - 90 – 20 - 50
20 - 90 – 20 - 40
20 - 90 – 15 - 20
20 - 90 – 10 - 20
20 - 90 – 10 - 20
40 - 100 – 50 - 120
30 - 90 – 30 - 50
– – –
– – –
– – –
– – –
empfohlene Schnittwerte ShArK-CUT®
ISo Material
Tens
ile s
treng
th(n
/mm
2 )
Cutting speed VC (m/min)
P
Unalloyed steel and cast steel
< 0.15 % C / hardened and tempered 350
0.15 - 0.45 % C / hardened and tempered 650
> 0.45 % C / hardened and tempered 1000
Low alloyed steel and cast steel
annealed 600
hardened and tempered900
1200
high alloyed steel annealed 700
high alloyed tool steel and cast steel hardened 1100
Stainless steel ferritic, annealed 700
Cast steel martensitic, hardened and tempered 1000
M Stainless steelaustenitic and austenitic / 450 – 600
ferritic, chilled 600 – 900
K
Cast iron
pearlitic / ferritic 500 – 700
pearlitic / martensitic700 – 850
800 – 1100
Cast iron with nodular graphiteferritic 550
pearlitic 800
Malleable cast ironferritic 450
pearlitic 750
n
Aluminium alloys long chippingnot heat treatable 200
heat treatable, heat treated 350
Casted aluminium alloys
≤ 12 % Si, heat treated 250
≤ 12 % Si, heat treatable, heat treated 300
≤ 12 % Si, not heat treatable 450
Copper and copper alloys (brass / bronze)
Lead alloys, Pb > 1 % 400
Brass, Bronze 300
Aluminium bronze 500
Copper and elektrolyte copper 200
non-ferrous materials
Duroplastice –
Re-inforced plastics –
Hard rubber –
Shigh temperature resistant alloys
Fe-alloyed, annealed 700
Fe-alloyed, heat treated 950
Ni- or Co-alloyed, annealed 800
Ni- or Co-alloyed, casting 1100
Ni- or Co-alloyed, heat treated 1200
Titanium alloys Pure titan 500 – 700
Alpha- and beta-alloys heat treated 700 – 1000
hhardened steel hardened
55 HRC
60 HRC
hard cast iron casting 41 HRC
hardened cast iron hardened 55 HRC
The recommended cutting data are only approximate values. It may be necessary to adjust them to each individual machining application.
32 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
recommended cutting data ShArK-CUT®
coated
AM41
30
AP22
25
AP22
35
120 - 250 150 - 300 140 - 280
80 - 180 120 - 220 100 - 200
50-130 70-160 50-150
80 - 180 120 - 220 100 - 200
60 - 150 100 - 180 80 - 160
60 - 120 80 - 140 70 - 130
80 - 170 110 - 190 100 - 180
50 - 130 70 - 150 60 - 140
50 - 200 110 - 220 100 - 200
50 - 150 100 - 180 80 - 150
50 - 180 100 - 200 100 - 180
50 - 130 – –
120 - 200 130 - 280 120 - 250
100 - 180 130 - 280 120 - 250
80-230 110-220 100-200
120 - 200 120 - 280 110 - 250
100 - 180 120 - 280 110 - 250
90 - 160 110 - 280 100 - 250
70 - 150 110 - 280 100 - 250
80 - 2000 – –
80 - 1500 – –
80 - 1500 – –
80 - 1300 – –
80 - 600 – –
80 - 400 – –
80 - 400 – –
80 - 300 – –
80 - 200 – –
60 - 160 – –
50 - 140 – –
80 - 200 – –
20 - 90 – 20 - 50
20 - 90 – 20 - 40
20 - 90 – 15 - 20
20 - 90 – 10 - 20
20 - 90 – 10 - 20
40 - 100 – 50 - 120
30 - 90 – 30 - 50
– – –
– – –
– – –
– – –
ISo Materiale
resi
sten
za(n
/mm
2 )
Velocità di taglio VC (m/min)
P
Acciai non legati
< 0,15 % C / bonificato 350
0,15 – 0,45 % C / bonificato 650
> 0,45 % C / bonificato 1000
Acciai debolmente legati e Ghise acciaiose
ricotto 600
bonificato900
1200
Acciai fortemente legati ricotto 700
Acciai da utensili e fusioni temprato e rinvenuto 1100
Acciai inossidabili ferritico, ricotto 700
Ghisa acciaiosa martensitico, bonificato 1000
M Acciai inossidabiliaustenitico e autenitico / 450 – 600
ferritico, trattato o temperato 600 – 900
K
Ghisa grigia
perlitica / ferritico 500 – 700
perlitica / martensitico700 – 850
800 – 1100
Ghisa sferoidaleferritico 550
perlitica 800
Ghisa temprataferritico 450
perlitica 750
n
Leghe di Alluminio stampatonon invecchiato 200
invecchiato 350
Leghe di Alluminio da fusione
≤ 12 % Si, invecchiato 250
≤ 12 % Si, rinvenuto, invecchiato 300
≤ 12 % Si, non invecchiato 450
rame e Leghe di rame(bronzo / ottone)
Automatici, Pb > 1 % 400
Ottone, Bronzo 300
Bronzoalluminio 500
Rame e Rame Elettrolitico 200
Materiali non metallici
Duroplastiche –
Plastiche rinforzate –
Gomme dure –
SLeghe resistenti al calore
Base-Fe, ricotto 700
Base-Fe, invecchiato 950
Base Ni o Co, ricotto 800
Base Ni o Co, da fusione 1100
Base Ni o Co, invecchiato 1200
Leghe di Titanio Titanio puro 500 – 700
Leghe Alpha+beta invecchiato 700 – 1000
hAcciaio Temprato temprato e rinvenuto
55 HRC
60 HRC
Getti Temprati da fusione 41 HRC
Ghisa Temprata temprato e rinvenuto 55 HRC
I dati indicati in tabella sono valori approssimati. Può essere necessario adattarli alle singole applicazioni di lavorazione.
33Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura
Parametri di taglio suggeriti ShArK-CUT®
rivestito
AM41
30
AP22
25
AP22
35
120 - 250 150 - 300 140 - 280
80 - 180 120 - 220 100 - 200
50-130 70-160 50-150
80 - 180 120 - 220 100 - 200
60 - 150 100 - 180 80 - 160
60 - 120 80 - 140 70 - 130
80 - 170 110 - 190 100 - 180
50 - 130 70 - 150 60 - 140
50 - 200 110 - 220 100 - 200
50 - 150 100 - 180 80 - 150
50 - 180 100 - 200 100 - 180
50 - 130 – –
120 - 200 130 - 280 120 - 250
100 - 180 130 - 280 120 - 250
80-230 110-220 100-200
120 - 200 120 - 280 110 - 250
100 - 180 120 - 280 110 - 250
90 - 160 110 - 280 100 - 250
70 - 150 110 - 280 100 - 250
80 - 2000 – –
80 - 1500 – –
80 - 1500 – –
80 - 1300 – –
80 - 600 – –
80 - 400 – –
80 - 400 – –
80 - 300 – –
80 - 200 – –
60 - 160 – –
50 - 140 – –
80 - 200 – –
20 - 90 – 20 - 50
20 - 90 – 20 - 40
20 - 90 – 15 - 20
20 - 90 – 10 - 20
20 - 90 – 10 - 20
40 - 100 – 50 - 120
30 - 90 – 30 - 50
– – –
– – –
– – –
– – –
34 ARNO®-Werkzeuge | Katalog-Ergänzung | Bohren ∙ Drilling ∙ Foratura Alle Angaben in mm / Dimensions in mm / Tutte le dimensioni in mm
ISohartmetall beschichtetCarbide coatedMetallo duro rivestito
hartmetall unbeschichtetCarbide uncoatedMetallo duro non rivestito
SchneidstoffCutting material
Materiale da taglio
AnwendungApplicationParametri
PStahl, Stahlguss, langspanender Temperguss
Steel, cast steel, long chipping malleable iron
Acciaio, acciaio colato, ghisa temprata a truciolo lungo
10
20
30
40
50
Mrostfreier Stahl, Stahlguss, Manganstahl, Automatenstahl
Stainless steel, cast steel, manganese steel, free cutting steel
Acciaio inossidabile, acciaio colato, acciaio al manganese, ghisa legata, ghisa temprata, acciaio automatico, leghe refrattarie
10
20
30
40
50
KGrauguss, Kokillenhartguss, kurzspanender Temperguss
Grey cast iron, chilled hard cast iron, short chipping malleable iron
Ghisa grigia, ghisa fusa in conchiglia, ghisa temprata a truciolo corto, acciaio temprato, metalli non ferrosi, plastica, legno
10
20
30
40
50
nAluminium und Al-Legierungen, nichtmetallische Werkstoffe
Aluminium and Al-alloys, non ferrous materials
Alluminio e leghe di alluminio, materiali non metallici
10
20
30
40
50
SWarmfeste Legierungen, Titanlegierungen
High temperature resistant alloys, Titanium alloys
Leghe refrattarie, leghe di titanio
10
20
30
40
50
hGehärteter Stahl, hartguss
Hardened Steel, hard cast iron
Acciaio temprato, ghisa conchigliata
10
20
30
40
50
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
Zähi
gkei
tTo
ughn
ess
/ Ten
acità
Zähi
gkei
tTo
ughn
ess
/ Ten
acità
Zähi
gkei
tTo
ughn
ess
/ Ten
acità
Zä
higk
eit
Toug
hnes
s / T
enac
itàZä
higk
eit
Toug
hnes
s / T
enac
itàZä
higk
eit
Toug
hnes
s / T
enac
ità
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
Vers
chle
ißbe
stän
digk
eit /
Wea
r
resi
stan
ce /
Resi
sten
za a
ll’us
ura
hauptanwendungsbereich / Main application area / Applicazione principale
Sorte / Grade / Qualitàempfohlener Anwendungsbereich / Recommended application area / Applicazione consigliata
AM35C
hauptanwendungsbereich / Main application area / Applicazione principale
neue Sorten / New grades / Nuova qualitàempfohlener Anwendungsbereich / Recommended application area / Applicazione consigliata
AM4130
nebenanwendungsbereich / Secondary application area / Applicazione dsecondaria
Sorte / Grade / Qualitàempfohlener Anwendungsbereich / Recommended application area / Applicazione consigliata
AR26C
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
Vors
chub
Feed
rat
e / A
vanz
amen
to
Schn
ittge
schw
indi
gkei
tCu
tting
spe
ed /
Velo
cità
di t
aglio
AM35
CAL
350
AM50
35
AM41
30
AL35
0
AM50
35
AL10
AR26
C
AL10
AL35
0
AM50
35
AM35
C
AL10
AK10
AK10
AL10
AK20
15AP
2225
AP22
35
AM41
30
AP40
AP22
25
AP22
35
AR26
C
AK10
AK20
15
AM41
30
ISo-Anwendungsbereich ShArK-CUT® ISO-Application area ISO-Campi di applicazione
Weitere Informationen finden Sie unter: For more information see:Altre informazioni sotto: www.arno.de
Karl-heinz Arnold GmbhKarlsbader Str. 4 D-73760 Ostfildern
Tel.: +49 (0)711 34 802 0Fax: +49 (0)711 34 802 [email protected] [email protected]
Arno (UK) Limited | Unit 9, 10 & 11, Sugnall Business Centre | Sugnall, Eccleshall | Staffordshire | ST21 6NF ( +44 01785 850 072 | 7 +44 01785 850 076 | [email protected] | www.arno-tools.co.uk
Arno Italia S.r.l | Via J. F. Kennedy 19 | 20871 Vimercate (MB) ( +39 039 68 52 101 | 7 +39 039 60 83 724 | [email protected] | www.arno-italia.it
Arno-Werkzeuge USA LLC | 1101 W. Diggins St. | US-60033 Harvard, Illinois ( +1 815 943 4426 | 7 +1 815 943 7156 | [email protected] | www.arnousa.com
Arno rU Ltd. | Krassnaja Ul. 38 | RU-600015 Vladimir ( / 7 +7 4922 541125 | CoT +7 4922 541135 | [email protected] | www.arnoru.ru
Arno Werkzeuge S.e.A. PTe. LTD. | 25 International Business Park | #04 – 70A German Center | SG-609916 Singapore ( +65 65130779 | 7 +65 68970042 | [email protected] | www.arno.com.sg
© a
genc
ytea
m ·
ARN
O-1
5033
-DEI
Werkzeuge und Wendeschneidplatten zum bohrenDrilling tools and indexable inserts for drilling
Utensili ed inserti di foratura
Werkzeuge und Schneideinsätze zum ein- und AbstechenTools and inserts for parting and grooving
Utensili ed inserti di troncatura e scanalatura
Werkzeuge und Wendeschneidplatten zum Fräsen und GewindefräsenMilling cutters and indexable inserts for milling and thread milling
Utensili ed inserti di fresatura e di filettatura di fresatura
Werkzeuge und Wendeschneidplatten zum Drehen und GewindedrehenTooling and indexable inserts for turning and threading
Utensili ed inserti di tornitura e filettatura
Arno®-Werkzeuge
Fordern Sie unsere weiteren broschüren oder den Gesamtkatalog an.For further information please ask for our complete catalogue.Per ulteriori informazioni richiedete la raccolta cataloghi completa. Siamo sempre al vostro servizio.