body building
DESCRIPTION
different stages of making complete BUS or any vehical for using TRANSPORTATION purpose of passenger.the journy of vehicle from CHASSIS TO ON ROAD.TRANSCRIPT
Engine Assembly Department
Valve setting
Crankshaft grinding
Fuel Injection Pump Testing
Cylinder boring, Liner fitting, and Piston arrangement
Camshaft fitting and Valve arrangement
Clutch and Gear fitting
Camshaft fitting and Valve arrangement
8 Cylinder V-Type Diesel Engine
Body Building Shop
There are 2 line,each line has 3 stage, in each stage 4 to 5 operation has to be done on Bus chassis .
The chassis are come from TATA & ASHOKLEYLEND Automobile Pvt. Ldt , INDIA
Frame building and Welding on Chassis
Metal sheet cutting and fitting by Riviting
Corner grinding and finishing
Gas welding and Leakage solution
The chassis are come from TATA & ASHOKLEYLEND Automobile Pvt. Ldt , INDIA
Frame building
Frame is Weld on Chassis
Paint shop
Primer Laping
Colour painting
Sheet fitting
Sticker
Glass fitting (window, front and rear)
Wiring
Water leakage testing
Parsing
Primer Laping
Sheet fitting
Sticker
Parsing
Engine Testing Section
Introduction
Assembly
Testing Time
Checking Engine Component
o F.I. pump Testingo Water pump testingo Oil sump and Strainer testingo Compressor testingo Exhaust gas checkingo Tepet systemo Fillet gauge
• Firing testing• Speed testing
Tyre remolding Section
What is tyre remolding ?
Types of tyre remolding
o Hot remoldingo Cold remolding
Operation for Tyre remolding
o Buffingo Cuttingo Solutiono Boundingo Belt Solutiono Press machine preocesso Heat by Borner machine
Thank_you
Krunal_patel Automobile
Engineer