blast room abrasive blast rooms · plastic and walnut shell. standard sizes: 4’ 6’ 8’ 10’...
TRANSCRIPT
![Page 1: BLAST ROOM ABRASIVE BLAST ROOMS · plastic and walnut shell. Standard Sizes: 4’ 6’ 8’ 10’ & 12’. Used for quicker recovery with all media types including steel grit and](https://reader030.vdocuments.site/reader030/viewer/2022040923/5e9e10ac175cb05e7a01db36/html5/thumbnails/1.jpg)
ABRASIVE BLAST ROOMS
MANUFACTURED IN CANADABrochure #ABR1605www.modublast.com
B L A S T R O O MLAB-1
SUPERIOR PERFORMANCE& QUALITY IN BLAST CLEANING EQUIPMENT
![Page 2: BLAST ROOM ABRASIVE BLAST ROOMS · plastic and walnut shell. Standard Sizes: 4’ 6’ 8’ 10’ & 12’. Used for quicker recovery with all media types including steel grit and](https://reader030.vdocuments.site/reader030/viewer/2022040923/5e9e10ac175cb05e7a01db36/html5/thumbnails/2.jpg)
AIR WASH CLASSIFIER
SWEEP-IN SYSTEM
STORAGE HOPPER
BLAST POT
MAN DOORHOSE MANIFOLD
CONTROL PANEL
• Tunable air wash classifier with rotating screen adjustable for most recyclable medias. Comes complete with 1/2 HP motor.
• Above floor mechanical recovery sweep-in system shown in photo.
• 20 cubic feet media storage hopper with slide gate.
• Abrasive blast pot – Model: MBM-6.5SRE – complete with adjustable spider and lid assembly that has hold downs and is vented into the room.
• One external man door with heavy duty door latch kit with striker and safety viewing window. Located on either side of blast room.
• Hose manifold to handle blast hose, remote line, breathing line, blow off air hose and lid vent.
• External Electric Control Panel – complete with 12 Volt controls to Blast System.
FEATURES
ADDITIONAL FEATURES
MEDIA RECOVERY OPTIONS
PNEUMATIC RECOVERY
BELOW FLOOR
MECHANICAL RECOVERY ABOVE FLOOR
BUCKET ELEVATOR
• Powered by a 1-1/2 HP motor, the bucket elevator is belt driven and operates on two large steel pulleys. It carries media from the auger to the air wash. Also features a viewing window.
B L A S T R O O MLAB-1
Each system comes in different size variations to well accommodate any type of recovery, from a single portion sweep to a full floor recovery.
For use with glass bead, garnet, aluminum oxide, plastic and walnut shell.Standard Sizes: 4’ 6’ 8’ 10’ & 12’.
Used for quicker recovery with all media types including steel grit and shot.Standard sizes: 9’ 12’ & 16’.
*Custom sizes available upon request*
• All doors are equipped with safety interlocks to de-activate the blast when the door is opened. • Set-in fluorescent tube lighting assemblies with poly carb lenses.• Panels constructed out of 10 gauge steel, powder coated white on interior and exterior.
• Mounted Radex air purifier.
• Intake / Exhaust plenums. • Steel Floor comes complete with: - Custom fitted checker plate or flat steel floor. - Built with welded steel and anchored to the floor to prevent future ‘curling’ of plates due to the peening effect of blast operations.
![Page 3: BLAST ROOM ABRASIVE BLAST ROOMS · plastic and walnut shell. Standard Sizes: 4’ 6’ 8’ 10’ & 12’. Used for quicker recovery with all media types including steel grit and](https://reader030.vdocuments.site/reader030/viewer/2022040923/5e9e10ac175cb05e7a01db36/html5/thumbnails/3.jpg)
www.modublast.com
DUST COLLECTION
OPTIONS
Distributed By:403 - 69 Avenue Edmonton, AlbertaT6P - 0C2
Ph: (780) 466-5085 Fax: (780) 465-7317 Service: (780) 425-5510Email: [email protected]
Brochure #ABR1605
3000 CFM Dust Collector illustrated
6000 CFM Dust Collector illustrated
9000 CFM Dust Collector illustrated
12000 CFM Dust Collector illustrated
• Mod-U-Blast® reverse pulse cartridge collectors are available from 300 CFM to 12,000 CFM. They provide optimum clean air environments for blast cabinets, booths and blast rooms. Reverse pulse collectors feature high efficiency 280 pleated filter cartridges.
• M1200-2C, M2000-4C, M3000-6C, M6000-12C, M9000-18C and M12000-24C models are used for blast room applications and come standard with auto-timed controls. Hopper discharge is standard with all reverse pulse collectors.
• Low profile models also available.
DUST COLLECTOR MUFFLER
AIR BLOW OFF LANCE PACKAGE
HIGH FLOW REGULATOR
• Reduce noise tone levels with Mod-U-Blast’s muffler add-on.
• High volume industrial blow-off lances with brass air valves and welded construction. (Connects to hose manifold inside the blast room.)
• Control blasting air pressure with a high flow regulator.