MODEL 7200 Pro SeriesSTYLE STEPLADDER

Thick——side plates

Shoulder bolt and locknut on top hinge;4 solid aluminum rivetsattach top to each front rail

Heavy duty ——internal spreaders

Full set of rearhorizontals spacedone per foot

Heavy gaugeTool-Tra-Top®

Back-up platesreinforce all topconnectors

Top step isknee-bracedand triple riveted

Slip-resistantTraction-Tred®steps aredouble riveted

EDGE* - molded brace andfoot pad combinationprovides enhanced bracingstrength and increasedprotection against damageMolded external rail shield helps _protect against abrasion damage• Energy Diffusing GEometry• Every rivet backed up by metal part or washer to protect rails• Optional black molded pail shelf kit, model no. 76-3

SPECIFICATIONS

ModelNo.

7203720472057206720872107212

Size3'4'5'6'8'

1 0 '12'

Approx.Width

1 9 - 1 / 8 "21-7/8"22-5/8"24-3/8"27-7/8"30-3/8"34-7/8"

Approx.Spread

23-1/2"29-3/4"35-7/8"

42"54-3/4"66-5/8"

79"

Approx.Cu, Ft.

Per Unit2.43.44.56.98.3

1 1 . 214,5

Approx.ShippingWt. Lbs.

14,017.020.023.531.542.052.0

DIMENSIONSTop: 7 - 1 / 8 " x 1 4 "

Front Rails: 3-1/8" wideFlange: 1-3 /16" wide

Steps: 3" wideRear Rails: 1 -7/8" wide

Flange: 1-3 /16" wide

BJJJMODEL: 7400 SeriesSTYLE STEPLADDER

LOAD CAPACITYOA A lift** Combined weightJU(J ID vi of user and materials.Extra Heavy Duty/Professional UseTYPE IA

Thickside plates

Shoulder bolt and locknut on top hinge;4 solid aluminum rivetsattach top to each front rail

Extra heavy dutyinternal spreaders'

Full set of extrastrength rearhorizontals are kneebraced and spacedone per foot

U-channel doublebraces onbottom step

Orange electricallynon-conductiveside rails

Heavy gaugeTool-Tra-Top®

Back-up platesreinforce all topconnectors

Slip-resistantTraction-Tred9

extra wide stepsare knee-bracedand triple riveted

r

Non-conductive rail shields reinforcebottom ends for increased resistanceto damage

Combination rail end shield andfoot with slip-resistant foot pad

Every rivet backed up by metal part or washer to protect railsOptional black molded pail shelf kit, model no. 76-3

SPECIFICATIONS

ModelNo.

740374047405**74067407**740874107412

Size3'4'5'6'7'8'

10'1 2 '

Approx.Width

19-3/8"21-1/2"22-7/8"24-5/8"26-3/8"28-1/8"31 -5/8"35-1/8"

Approx.Spread24-3/8"30-1/2"36-3/4"42-7/8"

49"55-1/4"67-1/2"79-7/8"

Approx,Cu. Ft.

Per Unit2.43.44.55.76.98.3

1 1 . 214 ,5

Approx.ShippingWt. Lbs.

16.019.023.027.031.035.045.055.0

DIMENSIONSTop: 7 - 1 / 4 " x 1 4 "

Front Rails: 3-3/8" wideFlange: 1-3 /16" wide

Steps: 3-1/4" wideRear Rails: 2" wide

Flange: 1 -7/8" wide

ProductCertificationsANSI

MANUFACTURER CERTIFIESCONFORMANT TO

STANDARDS

AMERICAN NATIONALSTANDARDS INSTITUTE

PRODUCT LINES MEET OR EXCEED ANSI CODEFiberglass Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A14.5 (1992)Aluminum Ladders . . . . , , . , . . . , . . . . . . , . , , . . . , . . . . . . . . A14.2 (1990)Wood Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1 4 . 1 (1994)Ladder Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A10.8 (1988)Extension Planks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A 1 0 . 8 (1988)

OCCUPATIONAL SAFETY ANDHEALTH ADMINISTRATION CODE

All Type II, I and IA fiberglass, aluminum and wood ladders, ladder jacks andextension planks meet or exceed code. OSHA CODE applies to ladders used inthe workplace. Werner Ladder Co. recommends Type II or heavier duty ratedladders for these applications.

UNDERWRITERSLABORATORY CODE

SERIES COMPLY WITH U.L. STANDARDS AS NOTED:Aluminum Ladders...............................................................................................AII SeriesLadder Jacks.............,,,....,,..,.,.................,.,,,..,,..........,..................,,,,.,.,..............All SeriesAluminum Extension Planks...............................................................................All SeriesFiberglass Ladders................................................................,........NO U.L. STANDARDS

NOTE: No ANSI, OSHA or U.L Standards have been written for atticladders for overhead access.

SAFETY//SWIART•$^._S £ w

**MtAV*

All Werner fiberglass ladders have electricallynon-conductive rails. This is a great benefitfor those working near electricity. Fiberglassrails also maintain a smooth surface evenafter weathering,

Werner ladders areproudly made in U.S.A.

CORPORATE HEADQUARTERSWerner Ladder Co.93 Werner RoadGreenville, PA 16125-9499Tel. (724)588-8600 • FAX (724) 588-0315

How to Placean OrderCall our Customer Service Department at (724) 588-8600from 8:00 AM to 5:00 PM (EST), Monday through Fridayor FAX your order to (724) 588-0315.

Note: All Special Order items are designated with a double asterisk(Example: 7516-2**\"^ i

Table of ContentsSeries

Fiberglass Stepladders5900 / 5900S Series . . , , , . . , , , .P5900 Series (Platform Ladders) ...6002 Model (Step Stool) , , , . . . . . .6000 / 6000S Series . . . , . . , . . , ,T6000 Series (Twin Stepladders) .,,PT6000-4C Series (Stockr's Ladders8

T6202 Model (Step Stool) , . . , , , . .6200 Series , , . . . , . . . . , . . , , , . .7200 Series , . . , , , . . , , , . . , . . . ,7400 Series , . . , , , . . , , , . , , , . , ,PT7400-4C Series (Stockr's Ladders8

Page No.

.1

.1

.2,2,3.3.4.4.5,5,6

T7200 Series [Twin Stepladders) , , . , , . . , , , . . , , .6T7400 Series (Twin Stepladders) . . . . . . . . . . . . . . . 7P7400 Series (Platform Ladders) . . . . . . . . . . . . . . . 7Comparison Chart , . . , , . . , . , , , , . . , , , . . , , . . , . 8E7400 Series (Trestle Ladders) , , , . . , , . . . , . . . , .97800 Series (Step/Extension Ladders) . . . . . , . , , , .9

Fiberglass Extension LaddersD5900-2 Series . , , . . , , . . . , , . . , , , . . , . . . , . . 1 0D6000-2 Series , , . . , , , . . , . . . . . . , . , . . , , , . , 1 0D6200-1 / D6200-2 Series . . , , , . . . . . . . . . , , ,117100-1 / 7100-2 Series , . . . , , . . . , . . . , . . , , , 1 1D7100-2 Series . , , , . . , , . . . , . . . , . . , , , . . , , . 1 2D7500-2 Series , , . . , , . . . , , . . , , , . . , , . . , . . , 1 2Comparison Chart . . , , , . . , . . . . , . . . , . . . . , . . , 1 3

Werner Co. - the world's leading manufacturefa.0f^..

Werner is a state-of-the-art fully integrated manufacturerand distributor of fiberglass, aluminum and wood climbingproducts, Control of every step of the manufacturing processensures quality and allows flexibility to serve the needsof our customers.

Standard of the IndustryWerner ladders are made to last, Our products are backedby over 50 years of product design, testing and evaluationexperience. We begin with the best quality raw materials andexpertly manufacture those materials into high-strength laddersdesigned to perform year after year. We convert raw materials,such as aluminum ingot and fiberglass ravings, into the siderails, rungs and other parts used to make ladders, stages,scaffolds and accessories,

All Werner ladders are designed and manufactured to thesame rigorous quality standards and with a common goal ofbuilding the safest climbing equipment possible. Our productsare designed and manufactured to meet or exceed OSHAand ANSI requirements,

Werner offers ladders made from fiberglass,aluminum and wood.

FiberglassWerner was the driving force behind the development offiberglass ladder products. Fiberglass ladders have becomethe leading choice for both consumers and professionals due totheir great value, appearance and suitability for a wide range ofapplications, Werner uses a proprietary process to manufacturefiberglass reinforced ladder rails, Glassravings and structural glass mat areimpregnated with a thermoset resin andthen pulled through a temperature-controlled die to create finished ladderrail, Fiberglass pultrusions are made innumerous colors, are electrically andthermally non-conductive and haveexcellent structural and weatheringproperties, Werner's equipment isdesigned in-house specifically forladder rail production to offer the bestquality and control,

>C

TechnologicallyAdvanced Material:Multiple layers of uni-directional glass rovingsand multi-directionalglass structural matcreate the strong, durableWerner fiberglass rail.