bibliography of gabriel lodewijks

1 / 44

Curriculum Vitae

of

Prof.dr.ir. GABRIEL LODEWIJKS

Delft, The Netherlands, March 26, 2013

2 / 44

Contents

1 PERSONAL .................................................................................................................................................. 3

2 ADDRESS ..................................................................................................................................................... 3

3 QUALIFICATIONS AND EXPERIENCE ................................................................................................ 4

4 ACADEMIC EXPERIENCE ....................................................................................................................... 5

5 M.SC. STUDENTS ....................................................................................................................................... 7

6 PH.D. STUDENTS ...................................................................................................................................... 22

7 PROJECT OVERVIEW ............................................................................................................................ 24

8 BIBLIOGRAPHY ....................................................................................................................................... 25

3 / 44

1 Personal

Name : Gabriël Lodewijks

Date of birth : September 5, 1969

Place of birth : Apeldoorn, The Netherlands

Citizenship : Dutch

Languages : Dutch (fluent), English (fluent), German, and French

2 Address

Work address Home address

Delft University of Technology Oude Delft 147

Faculty of Mechanical, Marine & Materials Eng. 2611 HA, Delft

Section Transport Engineering & Logistics The Netherlands

Mekelweg 2 Phone: (+31) 620 363815

2628 CD, Delft E-mail : [email protected]

The Netherlands

Phone : +31 15 278 8793

Fax. : +31 15 278 1397

E-mail : [email protected]

mailto:[email protected]

mailto:[email protected]

4 / 44

3 Qualifications and Experience

2011-2015 Vice dean of the faculty of Mechanical, Maritime and Materials Engineering

(3mE), Delft University of Technology.

2007-2010 Chief Technology Officer (CTO) Schiphol Group.

2007-present Lift Institute Amsterdam, chairman of the board (since 2014).

2006-2007 Ad-interim professor Dredging Engineering, at Delft University of

Technology, the Netherlands, faculty of Mechanical, Maritime and Materials

Engineering.

2004-present Ad-interim professor Production Engineering & Logistics, at Delft University

of Technology, the Netherlands, faculty of Mechanical, Maritime and

Materials Engineering.

2003-2015 Member of the management team of the faculty Mechanical, Maritime, and

Materials Engineering.

2003-2015 Chairman of department of Marine and Transport Technology of the faculty

Mechanical Engineering and Marine Technologies.

2002-2004 Ad-interim professor vehicle engineering at Delft University of Technology,

the Netherlands, faculty of Design, Construction and Production, section

Transport and Logistic Technology.

2000-present Professor of Transport Engineering and Logistics at Delft University of

Technology, the Netherlands, faculty of Mechanical, Maritime and Materials

Engineering, section Transport and Logistic Technology.

1999-2008 President of Banzo B.V., Emmer-Compascuum, The Netherlands.

1999-present President of Conveyor Experts B.V., Emmer-Compasuum, The Netherlands.

1996 - 1999 Project Manager for Special Technologies for Conveyor Dynamics, Inc.

(CDI), Bellingham, USA.

1994-present Lector of the four industrial seminars “Belt Conveyors”, “Belt Conveyor

Systems”, “Mechanical & Pneumatic Conveyors”, and “Bulk Material

Handling & Transportation”.

1994-1995 Project Consultant for BTR Dunlop-Enerka B.V., Drachten, The Netherlands.

1993, 1995 Project Engineer for BANZO B.V., Dordrecht, The Netherlands, part time.

2nd

half 1992 Project Engineer for J.Lo Engineering B.V., Ede, The Netherlands.

Dec 1991 Project Engineer for J.Lo Engineering B.V., Ede, The Netherlands.

Jul-Aug, 1990 Consulting Engineer for BTR Belting Group, Drachten, The Netherlands.

Jul-Aug, 1989 Project Engineer for J.Lo Engineering B.V., Ede, The Netherlands.

Summer, 85-88 Mechanic for J.Lo Mechanical Handling B.V., Ede, The Netherlands.

5 / 44

4 Academic Experience

Education

1992-1996 Graduate (Ph.D.) student at the Section of Transport Technology, Faculty of

Mechanical Engineering and Marine Technology, Delft, The Netherlands.

Doctorate degree obtained in October 1996. Doctorate thesis on the dynamics

of belt systems.

1991-1992 MBA course at the Erasmus University, Rotterdam, The Netherlands.

1991-1992 Study mechanical engineering, Faculty of Mechanical Engineering and Marine

Technology, Delft, The Netherlands. Master’s degree (Cum Laude) obtained

in June 1992. Masters thesis on the dynamics of mechanical conveyors, in

particular belt conveyors.

1987-1991 Study mechanical engineering, Faculty of Mechanical Engineering, Twente

University, Enschede, The Netherlands.

Visiting professorship

2013-present Wuhan University of Technology, Wuhan, China

2013-present China University of Mining and Technology, Xuzhou, China

2008-present University of Witwatersrand, Johannesburg, Republic of South Africa

2007-present University of New Castle, New Castle, Australia

Magazines

2011-present Guest editor of the International Journal of Computer Sciences and Systems

(IJCSS) published by Elsevier.

2000-present Member of the editorial advisory board of Bulk Solids Handling, the

international journal of storing, handling, and transporting bulk. Published by

Trans Tech Publishing, Germany.

2000-present Member of the editorial advisory board of BULK, the Dutch journal on bulk

solids handling and transportation. Published by Elsevier.

Societies

2006-present The South African Institute of Materials Handling, fellow

2004-present Royal Dutch Society of Transport Engineers, member of the board.

2001-present GLORI, Global Logistics Research Initiative, chairman Dutch branch

1990-present Royal Dutch Society of Engineers, member.

Research Schools

2008-present Delft Centre of Aviation, scientific director

2007-present J.M. Burgers Centre (Research School for Fluid Mechanics), chairman of the

board

2002-present TRAIL (Research School for TRAnsport, Infrastructure and Logistics), fellow

6 / 44

Advisory board

2010-present Advisory board Vlaams Instituut voor Logistiek, member

2007-2014 Advisory board Quintech Airport Innovations B.V., member

2003-present Advisory board Conveyor Knowledge & Information Technology, chairman

2003-present Advisory board Maritime Knowledge Centre, university member

2001-present Advisory board Executive MBA School Hanze University, member

Committees

2011-2013 Profile & Selection Committee Professor in Ship Production, chairman

2007-2011 Van de Leeuwenhoek professor advisory committee, permanent member

2007 VICI evaluation committee, permanent member

2009-2013 Profile & Selection Committee Professor in Large Scale Transport Systems,

chairman

2008-2010 Profile & Selection Committee Professor in Ship & Offshore Structures,

chairman

2006-2008 Profile & Selection Committee Professor in Dredging Engineering, chairman

2005-present Transportnet, member for Delft University of Technology

2005-2006 Profile & Selection Committee Professor in Ship Design, chairman

2005-2006 Profile & Selection Committee Professor in Hydro Mechanics, chairman

2005-2008 Profile & Selection Committee Professor in Offshore Engineering, chairman

2005-2007 OOD Faculty “Trekker”-team, member

2004-2014 Examination Committee Interfaculty Master Program Transport, Infrastructure

& Logistics, chairman

2004-2014 International Cooperation Committee Marine Technology, chairman

2001-2008 Science Committee Mechanical Engineering, member

Conferences

Bulk Solids Europe 2006, Barcelona, October 16-17, 2006, chairman and scientific director

Bulk Solids Europe 2008, Prague, September 11-12, 2008, chairman and scientific director

Bulk Solids Europe 2010, Glasgow, September 9-10, 2010, chairman and scientific director

Bulk Solids Europe 2012, Berlin, October 10-12, 2012, chairman and scientific director

7 / 44

5 M.Sc. students

The following Master of Science students were guided and supervised by professor

Lodewijks:

[1] Sjoerd de Jongh (2001), Dynamic routing and balancing in material handling systems,

Report Number 2001.LT.5558.

[2] Christiaan Frumau (2001), Pijpenleginstallaties op een muilti-purpose vessel, Report

Number 2001.TT.5535.

[3] Richard Spaargaren (2001), Multicelsilo, Report Number 2001.TT.5475.

[4] Jeroen Burgerhout (2001), Stootfactoren voor offshore geikkranen, Report Number

2001.TT.5441.

[5] Ton (A.M.) Bontekoe (2001), Dynamische analyse en ontwerp verbeteringen van een

portaal robot, Report Number 2001.TT.5439.

[6] Ekke J. Oosterhuis (2002), De vrij gravende schroeftransporteur in mammoet silo’s

vergelijking tussen afgraven van een horizontaal en schuin oppervlak, Report Number

2002.TT.6701.

[7] Geert-Pieter M. Hof (2002), Theory and simulation of fluid couplings, Report Number

2002.TT.5658.

[8] Ron Tuk (2002), Verbetering van de interne goederenstromen in het IKEA-

distributiecentrum Genk, Report Number 2002.LT.5620.

[9] Marcel Loots (2002), Optimalisatie van het luchtnetwerk van het automatisch parkeer

Systeem (APS), Report Number 2002.TT.5648.

[10] Martin P. Hes (2002), Spanningsconcentrtie factoren voor vakwerken, Report Number

2002.TT.5633.

[11] Maurice Gielisse (2002), The power consumption of Enerka-Becker systems, Report

Number 2002.TT.5616.

[12] Wouter O. Hubert v. Blijenburgh (2002), Het ontwerpen en implementeren van een

assemblagelijn voor verfdoseermachines, Report Number 2002.LT.5614.

[13] Alex W. Renckens (2002), Onderzoek nar de herinrichting van de reparatieafdeling

PW1 en PW2 binnen KLM Maintenance Unit CF6, Report Number 2002.LT.5565.

[14] Steven A. Harteveld (2002), Simulatie van een postsorteercentrum PTT met behulp

van Tomas, Report Number 2002.TT.5596.

[15] Arian A.H. van Houten (2003), (Her)ontwerpen van een automatic vehicle loading

system, Report Number 2003.TL.6816.

[16] Sjoerd G. Meijer (2003), Winching module for a temporary tension leg vessel, Report

Number 2003.TL.6790.

[17] Eric J. Jonk (2003), Hardware–in-the-loop simulatie van het TNO Steer-by-Wire

systeem, Report Number .

[18] Arjan Tromp (2003), Heave compensation for a heavy lift vessel, Report Number

2003.TL.6770.

[19] A.(Bram)J.B. van Roermund (2003), Een magazijnontwerpmethode, Report Number

2003.TL.6784.

[20] Paul Bremmer (2003), Functioning and testing of the BIGS telescopic Brake Line,

Report Number 2003.VT.6729.

[21] Paul C.M. v.d. Heijning (2003), De ontwikkeling van een functioneel globale

representatie van de wielophanging, Report Number 2003.VT.6730.

[22] Anubhuti Parajuli (2003), An AGV controllor for the intelligent transport systems

laboratory, Report Number 2003.TL.6782.

8 / 44

[23] Fisseha Meresa Alemayehu (2003), Beam-like belt modeling for vibration analysis in

belt mechanisms and conveyor systems, Report Number 2003.TL.6793.

[24] Andrés Belloso Damiano (2003), Modeling the effects of suspension compliance on

vehicle handling in ADVANCE, Report Number 2003.VT.6731.

[25] Gilbert L.M.D. Bouwens (2003), Parameter identification for steering system

performance of passenger cars, Report Number 2002.VT.5597.

[26] A (Dolf) M. Joekes (2003), The secondary distribution of ice cream, Report Number

2003.TL.6769.

[27] Babette Dirks (2003), Vehicle dynamics simulation of wheel wear for Swedish high-

speed train x2000, Report Number 2003.VT.6766.

[28] Marco W.A. Verstappen (2003), Generic workstation Model, Report Number

2003.TL.6745.

[29] Lotte T. van Halderen (2003), M.A.R.S. Mook Aircraft Recovery System. Een

conceptanalyse voor een bergingsvoertuig voor vliegtuigen, Report Number

2003.TL.6765.

[30] Arthur F. Huijgen (2003), High Capacity Infeed, Report Number 2002.TT.5642.

[31] Jan Willem van de Graaf (2003), Ontwerpen van een lay-out voor de repairafdeling

van KLM Engine Services, Report Number 2003.TL.6748.

[32] Olivier (K.H.) Wallien (2003), Concept voor geautomatiseerde belading van

vliegtuigcontainers met bagage, Report Number 2002.LT.6730.

[33] Arnold C. Boerefijn (2003), Ontwerp van een loadcurve programma, Report Number

2002.TT.6720.

[34] Sijbrand (W.S.) Verkerk (2004), Entwicklingsprozess zur methodischen Integration

und Überpüufing der funktionalität eines Dämpferreglers in ein Mehrkörper

Gesamtfahrzeugmodel, Report Number 2004.VT.6590.

[35] Katrien Vranckx (2004), Barcodes in de supply chain van Asco, Report Number

2004.TL.6911.

[36] Peter Delva (2004), Third party inbound logistics (3PL); stocking and picking, Report


[37] Alexander A.M.A. van Hasselt (2004), Improving the sourcing process of Unilever

Best Food Europe, Report Number .

[38] Jona Strik (2004), Right Transport Solution based on customer criteria, Report


[39] Pieter J. Commandeur (2004), Vier keer een auto in één jaar tijd. Projectmanagement

van een Formula Student team, Report Number 2004.VT.6907.

[40] Luping Wang (2004), Management Information systems in an organisation, Report


[41] Vincent M.I. Haag (2004), Onderzoek naar het lossen van laadeenheden met

transferbagage op Schiphol, Report Number 2004.TL.6880.

[42] Falco J.J. Dobbe (2004), Verhogen van de personele capaciteitsflexibiliteit van de

aanvoer- en afleverprocessen binnen de Verenigde Bloemenveling Aalsmeer , Report


[43] Jos van Rhee (2004), Deterioration of steel cord belts at RWE Power’s lignite mines,

Maintenance decision model, Report Number 2004.TL.6872.

[44] Hans Peter (JPA) Twaalfhoven (2004), Weerstanden en aandrijfkrachten in Enerka-

Becker Systeem, Report Number 2004.TL.6864.

[45] Frank Calis (2004), Mengen in een continuemenger, Report Number 2004.TL.6877.

[46] Xue Lin Yuan (2004), Study of Baggage Handling System for Ferry Terminal

Holwerd, Report Number 2004.TL.6874.

9 / 44

[47] Simon (SLGF) Schoutissen (2004), Design and Validation of a vehicle state Estimator,


[48] Paul E. Diepenhorst (2004), Track & Trace Technologie. Mogelijke toepassingen

binnen KLM Engineering & Maintenance, Report Number 2004.TL.6803.

[49] Gerben van der Werf (2004), Space saving excalators. Conceptual design of a height

reduced escalators, Report Number 2004.TL.6869.

[50] Bjorn H. Melgers (2004), Design and Implementation of a Software-in-the-loop (SiL)

environment for electronic control units, Report Number 2004.VT.6881.

[51] Max O. Huijse (2004), Damper Top Mount Analysis with a Quarter Vehicle Model,


[52] John F. Zuijderwijk (2004), Simulatie Pallet & Container Handling System KLM

Cargo, Report Number 2004.TL.6839.

[53] Frederik J.P. de Medts (2004), Studie naar de wagengevoeligheid voor wielonbelans

en de simulatie op een proefstand, Report Number 2004.VT.6836.

[54] Erik G.J. Groen (2004), Optimisation of maintenance strategies for belt conveyors in

rheinbraun’s lignite mines, Report Number 2004.TL.6800.

[55] Marvin E.M. van der Horst (2004), Center lining improvement on the pre-glued carton

former, Report Number 2003.TL.6804.

[56] Westerman Robert (2005), Increasing visibility and controllability of the handling of

damaged cars, Report Number 2005.TL.6992.

[57] Duijndam Lucas (2005), Integraal denken in de technische MRO artikelvoorziening:

Van knelpunten en wensen naar oplossingen, Report Number 2005.TL.7003.

[58] Hammen van Koen (2005), The intelligent conveyor belt, Report Number

2005.TL.6973.

[59] Berk Bas (2005), Sturing op doorlooptijd bij de uitvoering van MRO werkzaamheden

te Fokker Stork, Report Number IO.05.076.

[60] Sadée Cédric (2005), Functionele specificaties voor het optimaal staal bestellen,

Report Number IO.05.081.

[61] Wijga Peter (2005), Beheersing van het zorgproces door vorming van logistiek

homogene patientengroepen, Report Number IO.05.068.

[62] Yip Danny (2005), Ontwerp kwaliteitsbeheersingssysteem voor Kiremko Duurland BV

te Woerden, Report Number IO.05.30.

[63] Dong Lin (2005), Exploring the Impact of RFID on a Semiconductor Supply Chain,

Report Number 2005.TL.6983.

[64] Skaraadstadt Hilda (2005), Ontwerp van het order- en leverproces bij Kuipers Groep,

Report Number IO.05.057.

[65] Aland Stefan (2005), Analyse van de productiviteit en de effectiviteit van het

serviceproces , Report Number IO.05.048.

[66] Berg v.d. Marco A. (2005), Logistieke beheersing van onderzoeksopdrachten als ook

de registratie en archivering van meetresultaten binnen het Mechanisch Laboratorium

van Fokker Aerostructures BV, Report Number IO.05.058.

[67] Kusumaningtyas Indraswari (2005), Dynamics of a Multiple-Drive Belt Conveyor

during Starting, Report Number 2005.TL.6970.

[68] Zee van der Marijn (2005), Dynamic free range routing for automated guided vehicle,


[69] Christiaan Vreeken (2005), Ontwikkelen van anti-sway systeem op de modelkraan,


[70] Laurent Kent (2005), Airbus A380 BFE proces for the A380 program, Report Number

IO.05.040.

10 / 44

[71] Lunnemann Niels M. (2005), Blue printing the new ERP-system for the liquid

packaging division of Flint Schmidt, Report Number IO.05.011.

[72] Erwin Daryl D. (2005), Een nieuw aankomst concept voor Amsterdam Airport

Schiphol, Report Number 2005.TL.6946.

[73] Hilberink Annemiek (2005), Generating knowledge with a software model “A

knowledge-based expert system for condition monitoring of a hydraulic brake system,


[74] Hendriks Martijn (2005), Implementing UHF RFID Technology within part of Sony’s

Supply Chain, Report Number IO.05.021.

[75] Spek Nils-Jan (2005), Ontmenging van poeder in het Maltesers productieproces,


[76] Bruggen van Alex C. (2005), Inrichting van een holding-unit voor opname van acute

patienten in het LUMC-Leiden, Report Number IO.05.024.

[77] Hil van den Martijn J. (2005), Modelleren van een thermische schroeftransporteur,


[78] Vermeiren Greet L.J. (2005), Disruptions in the daily process of KLM air traffic

management to the KLC operation, Report Number IO.04.108.

[79] Nevel van Willen S.W. (2005), Volvo Cars Gent: Kwaliteit van het Eindassemblage

Proces, Report Number IO.05.013.

[80] Diemeer Roy W.J. (2005), Ontwerp van de logistieke lay-out van het produktieproces

van Ammeraal BV Beltech te Heerhugowaard, Report Number IO.05.016.

[81] Bothe H.Edgar (2005), Improving the Customer Supply of Inks for the Packaging

Industry, Report Number 2005.TL.6921.

[82] Tom J. Mastenbroek (2006), Conceptontwerp “ontvangst op afstand” Schiphol,


[83] Jelle Rijswijk (2006), Feasibility study on item level tagging with EPC Gen2 UHF

RFID Technology for a zone pick process in a distribution, Report Number

2006.PEL.7107.

[84] Mart J. van Wijngaarden (2006), Mors op het oppervlaktewater: Een model ter

beoordeling van de effectiviteit van morsmaatregelen, Report Number 2006.TL.7100.

[85] Ernestina H. Schoute (2006), Herontwerp van de OK-planning in het Leids

Universitair Medisch Centrum, Report Number 2006.PEL.7105.

[86] Navin S. Ramkhelawan (2006), Lean tooling, Report Number 2006.PEL.7108.

[87] Arjan van Nieuwenhuijzen (2006), De prestaties van een stackerstation toegepast op

de containerterminal van Uniport, Report Number 2006.TL.7080.

[88] Zengzeng Wang (2006), Cutter teeth Logistics study, Report Number IO.05.115.

[89] S. Sandjew Kalidien (2006), The design of an automated maintained pipe conveyor,


[90] Lars R. Bieshaar (2006), Improving and consolidating Eurocontrol’s Air Traffic –

Management development organization, Report Number 2006.PEL.7068.

[91] Duco P.D. Wiertsema (2006), Development and formulation of a new maintenance

improvement program at Abbott Ludwigshafen, Report Number 2006.PEL.7058.

[92] Kroes Joost J. (2006), Readability of passive EPC GEN1 UHF RFID, Report Number

2005.PEL.7017.

[93] Versteegh. C.R.J. (2006), Design of a belt scraper test facility, Report Number

2006.TL.7041.

[94] Bosch van den Frank M. (2006), Geautomatiseerd overzetten en bufferen van

laadeenheden voor bagage op Amsterdam Airport Schiphol, Report Number

2005.TL.7001.

11 / 44

[95] Hoeven ter Tiemen F. (2006), Ontwikkeling en implementatie van een simulatie van

het productieproces van Silvo Papendrecht, Report Number 2005.TL.7020.

[96] Gijt de Michiel (W.M.) (2006), Multi-skilled maintenance and their Quality of

Service, Report Number 2006.TL.7024.

[97] Geurts Rengko K. (2006), Investigation complexity for the beverage industry, Report


[98] Leede van der Roger A. (2006), Analysis and improvement of creation process of SMS

at Dutch Space, Report Number 2005.TL.6976.

[99] S.A. Röben (2007), Design of a Logistics concept Modelling Tool, Report Number

2007.TEL.7203.

[100] Robbert F. Zeemeijer (2007), From commodities to specialities, Report Number

2007.PEL.7154.

[101] Anne A. van der Bend (2007), Operations Sheet Metal: een onderzoek naar en een

voorstel tot reductie van de uitvalkosten binnen de productieafdeling van Operations

Sheet Metal van Stork Fokker AESP, Report Number 2007.PEL.7170.

[102] Wouter J.G. Koelink (2007), Simulatiemodel voor capaciteitsoptimalisering IJsselland

Ziekenhuis, Report Number 2007.TEL.7155.

[103] Mathijs B. de Kleine (2007), Automatische labelen bagage, Report Number

2007.TEL.7136.

[104] Herfkens Bram M.A. (2007), Vergroten van percentage bagage afgehandeld door het

automatische bagagesysteem Schiphol, Report Number 2007.TEL.7163.

[105] Jan Carel Paro (2007), Continuous peoplemovers KLM, Report Number

2007.TEL.7152.

[106] Stefan A.P Janse. (2007), Onderhoud op de EECV-Terminal: een studie naar verbeter

mogelijkheden, Report Number 2007.TEL.7161.

[107] Roy F. Helmos (2007), JSF Production Transition Optimisation, Report Number

2007.PEL.7123.

[108] Claudia D.J. Nies (2007), Investing in dimension and Weight Scanner: A Necessity for

UPS SCS The Netherlands, Report Number 2007.TIL.7159.

[109] Erducan E. Fatih (2007), Successful implementation of CNC machining centres, Report

Number 2007.PEL.7137.

[110] Max H.A. Pijnappel (2007), Should KLM Engine Services opt for overhaul on the

GEnx, Report Number 2006.PEL.7098.

[111] Jan H. Visser (2007), Usability analysis of discrete simulation techniques to quantify

the differences between directed and self controlled planning, Report Number

2007.PEL.7138.

[112] P.R. Doorn (2007), Comparison of sea-side transport systems, Report Number

2006.TL.7092.

[113] M.J.A. Klaassen (2007), Operationele besturing en inrichting van een ijzererts

exportterminal, Report Number 2007.TL.7119.

[114] E. v.d. Lande v.d. (2008), Reegineering the sorting process at TNT Express depots

designing a method to support the choice for an optimal sorting system, Report


[115] T.L. Möller (2008), Investigation into the missing cages on TNT’s European Road

Network and the effect of active WiFi based RFID on tracking the location of the

cages, Report Number 2008.TIL.7262.

[116] J. Dijkhuizen (2008), Improving hub performance by better scheduling of personnel,

Report Number 2008.TIL.7263.

[117] F. Muurling (2008), Buizenpost simulatie, Report Number 2008.TEL.7233.

12 / 44

[118] A. Groenenboom (2008), Optimalisatie van het snijden van transportbanden, Report

Number 2008.TEL.7226.

[119] G.J. van de Lagemaat (2008), The WAX hub project, Report Number 2008.PEL.7224.

[120] J.F.A. Beckers (2008), Simulation of techniques to reduce vapour emissions from

atmospheric storage tanks, Report Number 2007.TEL.7194.

[121] J.P. Louwaard (2009), Verbetering stilstand management bij Corus (Corus IJmuiden),

Report Number 2009.PEL.7347.

[122] S. Steenstraten (2009), Streamlining warehouse flows at centraal Boekhuis, Report


[123] C.P. Geijs (2009), Research to capacity and energy flow for transport augers in

Eurosilos (NL. Onderzoek naar capaciteit en vermogen van transportschroeven in

Eurosilo’s, Report Number 2009.TEL.7368.

[124] K.K. Balder (2009), Gate processes at Amsterdam Airport Schiphol (NL. Gate

processen op Amsterdam Airport Schiphol, Report Number 2008.TEL.7314.

[125] M. van Schaijk (2009), A Simulation Integrated Design approach for agribulk

terminal design, Report Number 2009.PEL.7348.

[126] R. van Duijn (2009), The added value of simulation during liquid bulk terminal design,


[127] S.M. Slagboom (2009), AGV control – The key to successful transport systems with

automated guided vehicles in the production environment, Report Number

2009.PEL.7393.

[128] G.J. Thijssen (2009), Pre-reducing the moisture content in aggregates at asphalt

production plants of Royal BAM Group, Report Number 2009.TEL.7384.

[129] L. Hofkamp (2009), Analysis and improvement of the reliability of hourly capacity for

Schiphol’s runway system, in extreme weather conditions, Report Number

2009.TEL.7389.

[130] N.P.M. Warmerdam (2009), Mechanische geluidsbarrière (Ecobarrier - Schiphol

Group), Report Number 2009.TEL.7380.

[131] E.E. van Leeuwen (2009), AGV’s in a production environment: a flexible and modular

transport system for the production process of Vector Aandrijftechniek BV, Report


[132] F.E.H. Verkade (2010), Developing a software tool for determination of the

indentation rolling resistance of belt conveyors (Fenner Dunlop), Report Number

2010.TEL.7520.

[133] J.T. van der Geest (2010), Analysis of the sequencing problem in automated case

picking systems (SSI Schafer Noel GmbH Giebelstad), Report Number

2010.TEL.7524.

[134] R. Evers (2010), Feasibility study on an automated taxi mover” (Ammeraal Beltech

Heerhugowaard), Report Number 2010.TEL.7525.

[135] S.A. Goudswaard (2010), The design of a Mobile Harbour Crane via all-electric

drives” (Cargotec te Rotterdam), Report Number 2010.TEL.7511.

[136] F.H.A. Luelmo (2010), Feasibility of a horizontal reciprocating conveyor for biscuit

transport & Buffering” (Houdijk Holland te Vlaardingen), Report Number

2010.TEL.7512.

[137] C. Velraeds (2010), Automatic Case picking; conceptual Design and Feasibility for

Bulk to Tray”. (Vanderlande Industrie Veghel), Report Number 2010.TEL.7506.

[138] W.N. Vlaar (2010), Improving the applicability of a planning tools for shipbuilding

projects (Verenigde Scheepswerf Heusden), Report Number 2010.TEL. 7495.

13 / 44

[139] J. de Clercq (2010), Design of a new production facility lay-out for Airborne

Composite Tubulars (Airborne Composite Tubulars BV Den Haag), Report Number

2010.PEL.7544

[140] R. van der Feltz (2010), Optimization of Pre-Sorting Activities, Adapting and

Improving Current Means to TNT Post developments (TNT Post Den Haag), Report

Number 2010.TIL.7490.

[141] D.D. Hol (2010), Herontwerp van de gegevens- en vragenstromen bij de NZa (Ned.

Zorgautoriteit (NZa Utrecht), Report Number 2010.PEL.7485.

[142] K.M. van Aken (2010), Logistieke concepten Terminal AAS (Luchthaven Schiphol),


[143] H. v.d. Brink (2010), Redesign of the Project Acquisition System of Royal Haskoning

(Royal Haskoning te Rotterdam), Report Number 2010.PEL. 7471.

[144] J. van Dijk (2010), Feasibility of a batty solution for Ship-to-shore crane (Cargotec te

Rotterdam), Report Number 2010.TEL.7470.

[145] A.D. Vleeshakker (2010), De ontwikkeling en toepassing van een prestatie-

vergelijkingsmodel voor de productieteams van TNT Post BDS” (TNT Post DBS te

Utrecht), Report Number 2010.PEL.7413.

[146] H.F. Reijkens (2010), The future of algae production at LGem BV” (Royal Haskoning

te Rotterdam), Report Number 2010.PEL.7464.

[147] T.B. Weersink (2010), Defining an analysis method for the design of the “Simply

Philips Operating System of Shavers” (Philips Drachten), Report Number

2010.TEL.7313.

[148] M.A. Jacobse (2010), Kwaliteits borgingsysteem voor het verhandelen van produceren

van liners (Qbig Packaging Loosdrecht), Report Number 2010.PEL.7448.

[149] R.H. van der Vegte (2010), Belasting op midden kolom in een eurosilo (Eurosilo te

Purmerend), Report Number 2010.TEL.7463.

[150] M.P.M. Steinhage (2010), Direct seal, de innovatie voor de productie an een 2K fitting

door middel van insert overmoulding (Wavin te Dedemsvaart), Report Number

2010.TEL.7447.

[151] E.R.W. Haardt (2010), Vendor Managed Inventory in the inbound supply chain of

Vrumona (Vrumona te Bunnik), Report Number 2010.TEL.7450.

[152] H. Kroon (2010), Optimal operating strategy for a production facility of dish wash

pouches” (Proctor & Gamble te Strombeek, België), Report Number 2010.PEL.

[153] A.J.M. Zonneveld (2010), Evaluation and simulation of a Personal Rapid Transit

(PRT) System at Amsterdam Airport Schiphol, Report Number 2010.TEL.7436.

[154] M. Derks (2010), Improving project and resource planning within Frames Process

Systems ( (Frames Process Systems te Alphen a/d Rijn), Report Number

2010.PEL.7440.

[155] P.J.W. Vogel (2010), Improving sustainability of conveyor systems within baggage

handling (Quintech Eng. Inn. Delft), Report Number 2010.TEL.7419.

[156] T. ter Horst (2010), Required lead time analysis of passengers and their baggage at

Amsterdam airport Schiphol, Report Number 2010.TEL.7433.

[157] F.P.C. Kortekaas (2010), Berekenen van de capaciteit van interne transportsystemen

in de glastuinbouw (HAWE Systems Europe te Bergschenhoek), Report Number

2010.PEL.7432.

[158] J.R.H. Seisener (2010), Research of hot connection between OSF 2 and EB2 at Corus

Strip Products Ijmuiden, Report Number 2010.TEL.7427.

[159] R.J. van Ginneken (2011), The design of a labeling process for the DFS production

site Seclin” (DSM Food Specialities te Delft), Report Number 2010.PEL.7504.

14 / 44

[160] A. Vliem (2011), Het gebruik van simulatie binnen de RDW” (RDW te Zoetermeer),

Report Number 2010.TEL.7536.

[161] J. Coppoolse (2011), Design of a vertical transport system for baggage handling

(Quintech Delft), Report Number 2010.TEL.7518.

[162] S.L. Maas (2011), Analysis and redesign of the organization of Heerema Zwijndrecht

(Heerema Zijndrecht), Report Number 2010.PEL.7540.

[163] R.T. Leunissen (2011), Development of a new logistical concept for the handling of

passengers and their baggage from passenger terminal Amsterdam to Amsterdam

Airport (Schiphol Group), Report Number 2010.TEL.7527.

[164] F.B. Brussaard (2011), Stinger roller repair and maintenance process improvement

(Allseas, Delft), Report Number 2010.TEL.7521.

[165] Strien John N. (2011), “Development of an optimized Transport and Installation

method for offshore wind turbines” (Gusto MSC, Schiedam), Report Number

2011.TEL.7641.

[166] Yan Yunsong (2011), “Modeling and control of an intermodal transport hub”, Report


[167] Renting Peter C. (2011), “Optimaliseren kwaliteit en transparantie van prognoses in

een retail supply chain” (Albert Heijn, Zaandam), Report Number 2011.PEL. 7637.

[168] Vissers Roel S. (2011), “Deep-Sea Mining: Hype or Reality? A technical and

economical feasibility study of the deep-sea mining operations” (Allseas, Delft),


[169] Stoop Paul (2011), “OEE analysis of a dry bulk terminal” (Tatasteel te IJmuiden),


[170] Jong Schouwenburg de Andrew J. (2011), “Creating a design-tool for the sorting

trajectory of a MPU” (MPI te Oldenzaal), Report Number 2011.PEL.7553.

[171] Kuthe Nora C. (2011), “The design of a system for the evaluation of visitor behavior

at the Van Gogh Museum”, Report Number 2011.PEL.7626.

[172] Bos. Van den Niels M. (2011), “Design of a subsea crane for jacket removal”

(Heerema Marine Contractors Nederland BV te Leiden), Report Number

2011.TEL.7554.

[173] Hart ‘t Pascal S. (2011), “Application of extra high strength steels in offshore cranes”

(Huisman Equipment BV, Schiedam), Report Number 2011.TEL.7566.

[174] Woudstra Karsten L. (2011), “Air cargo supply chain security: A feasibility study on

the implementation of a screening process, according to the EU 185/2010

regulations” (Tebodin Den Haag), Report Number 2011.TEL.7619.

[175] Riemslag Bob J.A. (2011), “A simulation study for the truck handling process at

Euromax container terminal” (Euromax Terminal Rotterdam), Report Number

2011.TEL.7610.

[176] Sande van de Thomas (2011), “Logistics chain optimization for importing coal in

inland waterways in Eastern India” (Royal Haskoning Rotterdam), Report Number

2011. PEL.7618.

[177] Bender Paul B.M. (2011), “Reliability of the operation of SNR during A15

reconstruction work” (Shell Nederland Raffinaderij), Report Number 2011.PEL.7565.

[178] Postma Onno F.M. (2011), “In-wheel and in-drum motors for crane applications”

(Siemens Den Haag), Report Number 2011.TEL.7570.

[179] Mooijman Daniel L. (2011), “Logistieke besturing van een bulkterminal” (EMO

Maasvlakte), Report Number 2011.TEL.7603.

[180] Veldhuijzen Ard C. (2011), “SHARK Transport and Deploy System (TDS) (Geomil

Equipment BV Moordrecht), Report Number 2011.TEL.7592.

15 / 44

[181] Rodenburg Peter (2011), “Scheepslaadarmen, een innovatieve oplossing voor het

transport van vloeistoffen tussen wal en schip” (Jonge Flowsystems te Vlaardingen),


[182] Crooijmans Boudewijn M.T. (2011), “A framework to identify and rank Cradle to

Cradle improvement opportunities in an industrial invironment” (Royal Haskoning

Rotterdam), Report Number 2011.PEL.7584.

[183] Bruin de Bastiaan (2011), “Analyse van het gebruik van gerecycled materiaal bij de

productie van asfalt” (BAM Wegen de Tiel), Report Number 2011. TEL.7526.

[184] Taekema Fedde D. (2011), “Assessment of the V-Mill Concept” (Tata Steel Europe,

IJmuiden), Report Number 2011.TEL.7601.

[185] Hong Lili (2011), “Renovation for transfer points in dry bulk terminal” (EMO,

Rotterdam), Report Number 2011.TIL.7599.

[186] Vijfhuizen S. (2011), “Analyse en modellering van het pijpleidingennetwerk van

Vopak Terminal Vlaardingen”, Report Number 2011 TIL.7598.

[187] Vette de B.J. (2011), “Analysis of snag loads in a ship-to-shore crane” (Cargotec


[188] Vries de S. (2011), “Freight acceptance: selecting freight for spot checks using expert

knowledge in a fuzzy rule-base at Air France-KLM Cargo”, Report Number

2011.PEL.7591.

[189] Both L.A. (2011), “Proactive production control at Aluchemie (Aluchemie te Botlek en

Royal Haskoning te Rotterdam, Report Number 2011.EL.7588.

[190] Kalis W.P. (2011), “Haalbaarheidsonderzoek integratie van de productie ultrasone

flowmeters (UFM3030) aan de productie elektromagnetische flowmeters” (Krohne

Altometer Dordrecht), Report Number 2011.PEL.7585.

[191] Roos de Reinout P. (2011), “Development of a maintenance cost estimation model for

comparative aircraft evaluation” (KLM), Rapport Number 2011.TEL.7575.

[192] Man de J.E. (Erik) (2011), “Redesign of the commercial handling and acceptance of

export cargo” (KLM Cargo), Rapport Number 2011.PEL.7579.

[193] Strik Frank (2011), “Optimal topology of Hybrid driveline when applied in a

passenger vehicle” (Innas Breda), Rapport Number 2011.TEL7569.

[194] Jong de Rogier (2011), “Sustainable production at Ballast Nedam NV – more than just

energy”, Rapport Number 2011.PEL.7572.

[195] Lommen Stef W. (2011), “The penetration of iron ores: Calibration discrete element

parameters using penetration tests” (Nemag Zierikzee), Rapport Number

2011.TEL.7559.

[196] Zwarteveen Jan Willem (2011), “Urban Traffic flow modeling in Addis Ababa”

(Intern), Rapport Number 2011.TEL.7558.

[197] Hoek van Bart S. (2011), “The introduction of wireless Technology in the Process

Industry” (Emerson Process Management Rijswijk), Rapport Number 2011 PEL.7556.

[198] Buschgens Wouter H. (2011), “Configuration control at ASML” (ASML Eindhoven),

Rapport number 2010.PEL.7497.

[199] Renes Theo C. (2011), “Radial Stinger Flexibility – The influence on rollerbox loads

and strains in the pipeline during deep water pipelay” (Allseas Delft), Rapport


[200] Voorend Robin (2011), “Integration of sustainability in the approach for designing a

barge container terminal” (Havenbedrijf Rotterdam), Rapport Number

2010.TEL.7532.

[201] Velden van der Marijke P.W. (2012), “Herontwerp van de procesbeheersing voor een

efficiënte en effectiever productieproces binnen Waco Lingen Beton”, Report Number

2011.PEL.7645.

16 / 44

[202] Kroon Jolien (2012), “Productiviteitsverbetering van het vervoeren van baggage vanaf

een inkomende vlucht” (KLM te Schiphol), Report Number 2012.PEL.7646.

[203] Bronsing Joost F.O. (2012), “Improving production control at Damen Shipyards with

Organizational learning principles” (Damen Shipyards, Gorinchem), Report Number

2012.PEL.7647.

[204] Soetens Mathijs A. (2012), “Positioning of a Spreader on the Pipe Transfer Crane on

board Pieter Schelte” (Allseas, Delft), Report Number 2011.TEL.7623.

[205] Leijsen van Bart J.M. (2012), “Herontwerp van de fysieke productie inrichting van de

afdeling Motion Simulation Technology by Bosch Rexroth” (Bosch Rexroth, Boxtel),


[206] Bohnen Kevin L.R. (2012), “Omproving delivery reliability by increasing the

production capacity of Mars Food in Oud-Beijerland”(Mars Food Oud Beijerland),


[207] Do Hoang Phu (2012), “Analysis of the current design of the Pipe Flow system on the

A-deck of thePieter Schelte” (Allseas Delft), Report Number 2012.TEL.7649.

[208] Vermeer Bob (2012), “Analysis of the increased maximum load occurrences of bulk

cranes”, (Tatasteel, IJmuiden), Report Number 2012.TEL.7654.

[209] Vink Elger J. (2012), “Herontwerp onderhoudsconcept voor voedingsmiddelbedrijf

Unilever” (Unilever, Vlaardingen), Report Number 2012.PEL.7648.

[210] Sloos Arnoud F. (2012), “System control design for the “Customer Service

International” department of PostNL” (PostNL, Hoofddorp), Report Number

2012.PEL.7653.

[211] Kuiper Jort J. (2012), “Onderzoek naar de knelpunten in het productieproces van de

Remia Sausfabriek en het bepalen van een oplossingsrichting” (Remia Sausfabriek,

Den Dolder), Report Number 2012.TEL.7651.

[212] Mohammadian Siamak (2012), “Optimization in powder coating”, Report Number

2012.PEL.7657.

[213] Lie Lilan L. (2012), “Capacity Expeditie Unilever Nassaukade” (Unilever Rotterdam),


[214] Uitentuis Steven P. (2012), “Redesign of export freight acceptance for air France-

KLM Cargo at Schiphol Airport”(Air France-KLM Cargo, Schiphol), Report Number

2012.PEL.7657.

[215] Heus de Bas (2012), “Ideal Cargohopper Flet Composition for the Environmental

Zone Amsterdam” (Transmission te Zoetermeer), Report Number 2012.TIL.7666.

[216] Zanden van der I. (2012), “Business Continuity at KLM Cargo”, Report Number

2012.TEL.7677.

[217] Ende van der R.C. (2012), “Dynamic Takt Time model to determine the feasibility of

the Cessna production lines in Mexico” (Fokker Papendrecht), Report Number

2012.TEL.7678.

[218] Lampe Z.P.E. (2012), “To advise on process improvements for operational

departments of KLM Cargo” , Report Number 2012.PEL7675.

[219] Wal van der Ferdinand G. (2012), “Analysis and re-design of the Ovet dry bulk

terminal in Vlissingen” (Royal Haskoning Rotterdam), Report Number

2012.TEL.7686.

[220] Maagdenberg Willem L.C. (2012), “Feasibility and service potential of FSP transport

concept” (Dockwise Breda), Report Number 2012.TEL.7684.

[221] Kruiver Martin G. (2012), “Identifying bottlenecks of the Rock Handling system

aboard the Tideway Rollingstone Fall Pipe Vessel” (Tideway Offshore Contractor

Breda), Report Number 2012.TEL.7685.

17 / 44

[222] Leeuwen van Floris (2012), “Recognitions and position determination of chassis,

container and spreader for automatic pick-up and landing system for container crane”

(Siemens Den Haag), Report Number 2012.TEL.7661.

[223] Lardinois Norbert M.G. (2012), “Logistics of the world’s largest heavy lifting cranes;

Logistiek van ‘s werelds grootste hijskranen” (Mammoet Utrecht), Report Number

2012.TEL.7668.

[224] Davina Koen (2012), “Development of a simulation-based tool for designing AGV-

systems for hospital logistics” (Deerns Rijswijk), Report Number 2012.TEL.7687.

[225] Parasuraman Dinesh K. (2012), “Development of a article fallout prediction model for

production cleanrooms” (ASML Veldhoven), Report Number 2012.TEL.7692.

[226] Pieters Maarten (2012), “Production system design of ASML, designing a production

system for the ramp-up towards volume production” (ASML Veldhoven), Report


[227] Aartrijk van Marijn A.B. (2012), “Short-term revenue forecasting at KM Royal Dutch

Airlines” (KLM Amstelveen), Report Number 2012.TEL.7697.

[228] Jansen Peter J.H.M. (2012), “Sorting solution for Post NL” (PostNL), Report Number

2012.TEL.7694.

[229] Hartsink Joost G. (2012), “Long term predictability of turnaround time for wide body

base maintenance checks at KLM hangar 14”(KLM), Report Number 2012.PEL.7691.

[230] Krstulovic B.A.F. (2012), “Traffic forecasting for improved Adaptive Traffic Control

in case of a non-ideal detector configuration” (TNO), Report Number 2012.TEL.7708.

[231] Pijper Marijn H. (2012), “Development of energy harvester for Belt Conveyor Idler

Remote Monitoring” (SKF), Report Number 2012.TEL7709.

[232] Voorden van der Arthur P. (2012), “Extension of the line pull calculation for twin-

drum traction winches using a bristle model”(Huisman), Report Number

2012.TEL.7711.

[233] Sluimer J.T. (2012), “Development of a decision support system for transport of large

systems for the oil and gas industry”, (Escher Process Modules BV part of IV group),

2012.TEL.7679.

[234] Alberda Jogchum J. (2012), “Reducing the reverse logistics of spare parts at KLM

Engineering & Maintenance”, Report Number 2012.PEL.7701.

[235] Eeken Edwin (2012), “Redesign of the lifting arrangement f a pipe transfer crane on

board Solitaire” (Allseas), Report Number 2012.TEL.7693.

[236] Cunes Bart D. (2012), “Occupation, Utilization and Presence of Learning

Spaces”(Intern) Report Number 2012.TEL7704.

[237] Erik J.J. Zandbergen (2012), “Herontwerp aansturing gereedschapsmakerij en

engineering KS Profiel” (KS Profiel, Moerdijk), Report Number 2012.PEL.7689.

[238] Mars Diederik A.I.J. (2012), “Prediction model of the improved availability and

servability of closed toilet systems at Dutch Railways”(Nedtrain), Report Number

2012.TEL.7710.

[239] Graaff de Robbert M.T. (2012), “Innovation of spacing out machine at

Plantenkwekerij Van der Lugt”, Report Number 2012.TEL.7715.

[240] Maljaars Samuel (2012), “Comparison of different fatigue calculation and the

development of a post-processing macro for the fatigue calculation of welds”

(Huisman Schiedam), Report Number 2012.TEL.7717.

[241] Kot Ard C. (2012), “Design of a high quality and controlled process for a centralized

collection of patient specimen” (LUMC Leiden), Report Number 2012.PEL.7670.

[242] Hengeveld Jasper J.S. (2012), “Optimization to reduce waiting times at locks”(Imtech

Marine & Offshore Rottterdam), Report Number 2012.TEL.7719.

18 / 44

[243] Kleinheerenbrink A.J.A. (Sander) (2012), “A design Tool for Dry Bulk Terminals”

(Royal Haskoning Rotterdam), Report Number 2012.TEL.7724.

[244] Smook Tom (2012), “Verbetering van de leverbetrouwbaarheid van Stork Gears &

Services”, Report Number 2012.PEL.7676.

[245] Fibbe Simon (2012), “Shipbuilding with lss shipping” (Damen Shipyards,

Gorinchem,) Report Number 2012.TIL7716.

[246] Wolde ten Mike (2012), “Optimizing Inspection Intervals. Reliability and Availability,

by means of a cost model; A case study on Railways Carriers” (NedTrain, Utrecht)

Report Number 2012.TIL.7725.

[247] Kleef van Dennis M. (2012), “Redesign of the Control Model of the catering

distribution Network of KLM”, Report Number 2012.PEL.7714.

[248] Dorrepaal Ad. R. (2012), “Repair process improvement of positioning modules at the

AM-WSN workcenter at ASML, Report Number 2012.PEL.7721.

[249] Bot Pieter C. (2012), “Determining the required storage capacity of an import dry

bulk terminal” (Royal Haskoning), Report Number 2012.PEL.7723.

[250] Berg van den Aart-Jan.J.C. (2012), “Ontwikkeling van een proactieve aansturing op

de productie van lactose te FrieslandCampina DOMO Borculo”, Report Number

2012.PEL.7730.

[251] Kohlmann Karlijn (2012), “Load@ease” (Vanderlande Veghel), Report Number

2012.TIL.7735.

[252] Selderbeek Ted (2012), “Taxiing of aircraft” (intern), Report Number

2012.TEL.7732.

[253] Bakker Lene A. (2013), “Control of the heat and dust development in the steel factory

of Tata Steel” (Tatasteel, IJmuiden), Report Number 2012.PEL.7718.

[254] Zijverden van Robbert J.H.A. (2013), “Method to evaluate scenarios of barge

transport for the margarine factory of Unilever in Rotterdam”(Unilever Rotterdam),


[255] Wijk van Caroline (2013), “Improvement of caterer performance at outstations of

KLM” (KLM Schiphol), Report Number 2012.PEL.7722.

[256] Plaizier Florus A. (2013), “The redesign of system control at Hollander: Balancing

carrier throughput”(Hollander, Barendrecht), Report Number 2013.TEL.7749.

[257] Riessen van Bart (2013), “Planning of hinterland transport in the EGS network” (ECT


[258] Veldhuizen Marco (2013), “Odd-size baggage KLM Royal Dutch Airlines” (KLM,

Schiphol), Report Number 2013.TIL.7756.

[259] Os van Edgar (2013), “Redesigning inspection process upon repairs at Tronox

Pigments B.V.”, Report Number 2013.TEL 7746.

[260] Milliano de Rene (2013), “Reduction of unnecessary cargo storage on offshore

location in the Southern North Sea” (One gas), Report Number 2013.TEL.7748.

[261] Verbeek John A. (2013), “Improvement of controllability, productivity and Cool Chain

of Europe’s largest flower exporter”, (Ozexport at the Kwakel), Report Number

2013.TEL.7758.

[262] Schornagel Just B.L. (2013), “Improving blockade analysis at the Packaging

department of Heineken Zoeterwoude”, Report Number 2013.TEL.7773.

[263] Nederveen M. Benjamin (2013), “Optimalisatie en inrichting Unaccompanied Minor-

afhandelingsproces van KLM”, Report Number 2013.TEL.7763.

[264] Vlaar Thijs, (2013), “Dry bulk terminal efficiency under changing input

actors”(EMO), Report Number 2013.TIL.7778.

[265] Kamp Jasper (2013), “Conceptual design analysis of an 8,000mt crane for HMC’s

NSCS” (Heerema marine Contractors Nederland), Report Number 2013.TEL.7793.

19 / 44

[266] Nyhuis Ole (2013), “Redesign concept for logistics of Volkswagen Commercial

Vehicles in Hannover, (VW, Duitsland), Report Number 2013.TEL.7796

[267] Schilder Willem M. (2013), “Verbeteren kwaliteit productie UMS Pastoe”, Report

Number 2013.TEL.7795

[268] Bolijn Ronald (2013), “Improving productivity of driving processes for special

baggage handling at KLM Royal Dutch Airlines”, (KLM), Report Number

2013.TEL.7794

[269] Kompeer Pieter-Jan (2013), “Development of a smart mobile belt conveyor

maintenance inspection tool”, Report Number 2013.TEL.7783.

[270] Vries de Maarten J. (2013), “Just-In-Time delivery of wheel sets”, (Nedtrain), Report


[271] Gils van Ronald (J.W.) (2013), “A comparison of the performance of automated

vehicles in container terminals”, (TBA), Report Number 2013.TEL.7799.

[272] Nieuwkoop Frans E. (2013),“Determining Inter Terminal Transport Configurations at

the Maasvlakte by Integer Programming”, Report Number 2013.TEL.7801.

[273] Oudshoorn Anton D. (2013), “Cost reduction of Ship-To-Shore container gantry

cranes for the Asia-Pacific market”, (Kalmar Rotterdam), Report Number

2013.TEL.7771.

[274] Gaag van der Timon (2013), “Redesign of the Inventory Control Model at KLM

Inflight Services at Schiphol”, (KLM), Report Number 2013.TEL.7800.

[275] Kraker de J.J.M. (Marco) (2013), “Development of a pharmacy robot for Far East

hospitals”, (Newton Waalwijk), Report Number 2013.TEL.7781.

[276] Geurts Pim (2013), “Maximizing the output of a fully automated warehouse (Ortec

Zoetermeer), Report Number 2013,TIL.7814.

[277] Koppenaal Sebastiaan. M.M. (2013), “Flexibele inzet van de ontwerp en engineering

capaciteit bij Koninklijke de Vries Scheepsbouw”, (Koninklijke De Vries

Scheepsbouw,Aalsmeer), Report Number 2013.TEL.7806.

[278] Achterberg Floris F. (2013), “The transport logistics effects from shipping coast and

value perspective for allocation of overseas facilities for Ampelmann Operations”

(Ampelmann Delft), Report Number 2013.TEL.7815.

[279] Kramer Michiel (2013), “Improvement of TPM implementation control at the

Heineken Brewery Zoeterwoude”, Report Number 2013.TEL.7812.

[280] Bos Jasper (2014), “Multidisciplinaire zorg voor kwetsbare ouderen: ontwerp en

capaciteitsbepaling van een poliklinisch proces in het Reinier de Graaf Gasthuis”,


[281] Westenbrugge van Christiaan A. (2014), “Design of a workflow Management System

for the engineering process of Damen Schelde Naval Shipbuilding, Report Number

2013.TEL.7819.

[282] Schröer Herbert J.L. (2014), “Evaluation of Intern Terminal Transport Configuration

at the Maasvlakte 1 and 2 using discrete Event Simulation”(HBR), Report Number

2013.TEL.7826.

[283] Engbers Josco G. (2014), “Enhancement of the coach assembly performance at VDL

Bus Valkenswaard”, Report Number 2014.TEL.7830.

[284] Oostlander Sander P. (2014), “Design of a device for interlocking a bundle of

4FOLDs” (Container Handling Innovations Delft), Report Number 2014.TEL.7822.

[285] Tieleman Peter (2014), “A study towards yield optimization for the Expanded Tobacco

II process of Philip Morris Holland B.V.”, Report Number 2014.TEL.7833.

[286] Lock Lennert W. (2014), “Het bepalen van KPI’s en normen voor het beheersen van

het logistieke proces van FloraHolland”, Report Number 2013.TEL.7821.

20 / 44

[287] Lange de C.C. (2014), “How to decrease straddle carrier traffic risk from a routing

perspective” (APM Terminal Rotterdam), Report Number 2014.TEL.7788.

[288] Blonk van der Jaap (2014), “Herontwerp van de besturingsstructuur voor een beheerst

en efficiënt proces vanaf aanvoer tot aan de distributie van de dragers”

(FloraHolland), Report Number 2013.TEL.7808.

[289] Sla Cruger (2014), “Lean replenishment at IKEA” (IKEA Amsterdam), Report


[290] Boersma Willem (2014), “Adding a value chain perspective to improve quality in

material flow within VDL ETG Eindhoven division Medial Systems” (VDL ETC

Eindhoven), Report Number 2014.TEL.7843.

[291] Crapts Marco M. (2014), “Redesign of the control model at SEW-EURODRIVE B.V.”

(SEW-EURODRIVE), Report Number 2014.TEL.7842.

[292] Tavakolly Navied (2014), “Stabilisatie van Treinonderhoud bij Nedtrain” (Nedtrain

Utrecht), Report Number 2014.TEL.7852,.

[293] Kooijmans Cyril H. (2014), “Design of an RTM series production line for complex

CFRP aircraft components” (Airborne Aerospace Den Haag), Report Number

2014.TEL.7851.

[294] Keyzer de Bjorn B. (2014), “Concept design of a modular heavy lift beam” (RollDock

Shipping .BV Capelle a/d IJssel), Report Number 2014.TEL.7853.

[295] Buitenhuis Ruud M. (2014), “Design of a machine maintenance information and

control system from a continuous improvement perspective” (Fokker Papendrecht),


[296] Milligen van Thomas N. (2014), “Increasing the efficiency in space usage for the

Damen Shipyards central warehouse in Gorinchem”, (Damen), Report Number

2014.TEL.7850.

[297] Crapts Terry M. (2014), “Improving the supply performance of forage harvesting

machines at Lely” (Lely te Maassluis), Report Number 2014.TEL.7855.

[298] Dijk van Wout G.P. (2014), “Voorraadbeheersing binnen de Koudbandwalserij van

Tata Steel in IJmuiden”, Report Number 2014.TEL.7846.

[299] Rutgers van Rozenburg Coen M. (2014), “Deep-sea mining: a road map to positioning

in the production chain” (Allseas Delft), Report Number 2014.TIL.7863.

[300] Aarts Tiets.A. (2014), “Minimizing Forklift capacity through Workload Control at

Nippon Express” (Nippon Express Nederland Schiphol-Rijk), Report Number

2014.TEL.7862.

[301] Crombach Paul H.L. (2014), “Delicate handling: Towards a failsafe handling

process for the new composite Boeing 787 at KLM”, Report Number 2014.TEL.7834.

[302] Dijkstra Robbert R.M. (2014), “Design of a shipping container for lithium ion

batteries” (Man Truck & Bus AG Munchen), Report Number 2014.TEL.7864.

[303] Student, M. (2014), “Modeling Single Particle Settlement by CFD-DEM Coupling

Method”, Report Number 2014.TIL.7873.

[304] Osnabrugge van Richard (2014), “Automated Manufacturing Production System

Logistics for Aerospace GLARE structures” (Fokker Papendrecht), Report Number

2014.TIL.7859.

[305] Dooijeweert van Jasper (2014), “Het verbeteren van de beheersing van de stroom

pakketten richting depots van PostNL” (PostNL Hoofddorp), Report Number

2014.TEL.7867.

[306] Hammen van der P.F. (2014), “Development of sustainable dry bulk terminals. A net

present sustainable value approach to embed sustainable developments in dry bulk

terminals” (Royal Haskoning DHV Rotterdam), Report Number 2014.TEL.7869.

21 / 44

[307] Kluijver de Wilbert (2014), “Rope grab design: a DEM study on the closing

mechanism, of an iron ore pellet grab” (Nemag Zierikzee), Report Number

2014.TEL.7870.

[308] Bijl van der A.N.M. Ton (2014), “Improved Snagload Protection system for STS

container cranes” (Cargotec Rotterdam), Report Number 2014.TEL.7875.

[309] Douma Yme Y. (2014), “Coca-Cola Enterprises: fit for the future” (Coca Cola

Dongen), Report Number 2014,TEL.7861.

[310] Sadeghi Horam (2014), “Inter Terminal Transport System Design Using conveyor

belts for the Port of Rotterdam”, Report Number 2014.TIL.7891.

[311] Lange de Lars R. (2014), “Active speed control for energy purposes on belt conveyor

systems, Report Number 2014.TEL.7880.

[312] Boontjes Tom (2014), “The Vertical containers terminal: stacking strategies and job

dispatching” (TBA Delft), Report Number 2014.TEL.7889.

[313] Zhou Claire (2014), “Analysis of vessel behaviors with respect to navigation rules

in the port area”, Report Number 2014.TIL.7899.

[314] Jongerius Tim (2014), “Modelling of the RandstadRail network for supporting

capacity studies” (HTM Den Haag), Report Number 201.TEL.7905.

[315] Erkens Mark (2014), “Optimization of the tram wheels maintenance for the RET

Rotterdam” (RTM Rotterdam), Report Number 2014.TEL.7895.

Updated till 12/4/2015

22 / 44

6 Ph.D. students

Professor Lodewijks was/is the promoter of the following Ph.D. students:

[1] D.G. Lindeijer, Controlling Automated Traffic Agents, Delft, 04/02/2003.

[2] H.P.M. Veeke, Simulation Integrated Design for Logistics, Delft, 24/06/2003.

[3] D.L. Schott, Large Scale Homogenization of Bulk Materials in Mammoth Silos, Delft,

28/6/2004.

[4] A.J.C. Schmeitz, A Semi-Empirical Three-Dimensional Model of the Pneumatic Tyre

Rolling over Arbitrarily Uneven Surfaces, Delft, 07/09/2004.

[5] H.J. Honig, Towards on-line Logistics: the LinC Interaction Modeling Language,

Delft, 15/11/2004.

[6] B.J. Pielage, Conceptual Design of Automated Freight Transport Systems, Delft,

21/11/2005.

[7] R. de Feijter, Controlling High Speed Automated Transport Network Operations,

Delft, 15/12/2006.

[8] A.J.G. Nuttall, Design Aspects of Multiple Driven Belt Conveyors, Delft, 26/11/2007.

[9] D.H. Marrenbach, Simulationgestützte Logistiksystemplanung auf Basis des Modells

eines modular strukturierten, vollständig technischen Anlagen-Entwurfs, Stuttgard,

08/12/2008

[10] A. Lopez de la Cruz, Integration and Operation of Prognostics in Logistics Systems,

Delft, 27/10/2009.

[11] I. Kusumaningtyas, Mind Your Step – Exploring Aspects in the Application of Long

Accelerating Moving Sidewalks, Delft, 27/10/2009.

[12] Y.S. Pang, Intelligent belt Conveyor Monitoring and Control, Delft, 6/12/2010.

[13] K. Wu, Design Aspects of Large Scale Biomass Terminals, Delft, 4/12/2012

[14] R.B.T Carmona Benitez, Optimal Routes for Airline Systems, 11/06/2012

[15] T. van Vianen, Design and Control of Bulk Terminals, 13/01/2015.

[16] Alireza Alemi, Intelligent monitoring of railway equipment (2017)

[17] Jei Cai, Residual strength of thin-walled cylindrical structures after collision (2018)

[18] Guangming Chen, Wear reduction of transport equipment using discrete element

method and bionic design (2017)

[19] Ioannis Dafnomilis, Development of Dutch biomass infrastructure (2018)

[20] Sayed Mohammad Ebrahim Derakshani, Modelling dust liberation by discrete element

method and computational fluid dynamics (2016)

[21] Victoria Eva Hancock, Analysis of biocoal handling properties towards suitability of

utilization of coal infrastructure (2019)

[22] Daijie He, Energy efficient continuous transport systems (2017)

[23] Qu Hu, Interface between container terminals and the railway network (2018)

[24] Shijie Li, Integrated optimization methods for improving the performance of inland

waterway transport (2016)

[25] Xiao Lin, Integration for quality oriented transport of perishables (2018)

[26] Xiangwei Liu, Large scale materials transport systems (2016)

[27] Stef Lommen, Grab design with discrete element method (2015)

[28] Wenhua Qu, Simultaneous delay management on railway networks for passenger and

freight flows (2018)

[29] Elena Rogova, Safety precautions in electrical systems (2017)

[30] Jianbin Xin, Multi-agent control for coordination of transport hubs (2015)

[31] Maria Zamiralova, Optimal design of a pipe conveyor (2015)

23 / 44

[32] Xiaobo Zhang, Crack propagation in the side shell of a damaged ship (2018)

[33] Huarong Zheng, Intelligent vessel control for inland waterways (2017)

[34] Fan Feng, Integrated coordination of inland waterway hinterland transport (2018)

[35] Rinze Geertsma , Shipdrive integrated coordination of vessel propulsion (2019)

24 / 44

7 Project Overview

Overview of projects acquired for section Transport Engineering and Logistics

Period 2005-2013, Projects with a budget over € 100,000.- only

[1] Project code 90109, PAN Davinci Platoon, budget € 108,907.-

[2] Project code 90221, Transumo Pilot, budget € 1,500,000.-

[3] Project code 90306, Innovation Bulk Handling, budget € 165,585.-

[4] Project code 90371, Excavator Tool Carrier, budget € 246,249.-

[5] Project code 90420, Saldanha Bay Terminal Design, budget € 297,745.-

[6] Project code 90421, Transportnet EST KP6, budget € 320,014.-

[7] Project code 90436, Shortsea Terminals, budget € 269,247.-

[8] Project code 90437, Floating Cranes for Cont. Handl. budget € 277,745.-

[9] Project code 90441, Cement Tests, budget € 258,745.-

[10] Project code 90476, Import of Biomass, budget € 225,000.-

[11] Project code 90484, Dense Flow Sand Water, budget € 232,000.-

[12] Project code 90504, Transportnet, budget € 238,874.-

[13] Project code 90660, Discrete Element Modeling, budget € 263,000.-

[14] Project code 90863 Safety Precautions in Elec. Systems budget € 197,134.-

25 / 44

8 Bibliography

1990

[1] Lodewijks, G. (1990), “Report: Dunlop-Enerka B.V. (in Dutch)”, Department of

Transportation and Storage of Bulk Solids, Faculty of Mechanical Engineering,

University of Twente.

1991

[2] Lodewijks, G. (1991), “On the Modeling of a Belt Conveyor System (in Dutch)”,

report no. 91.3.TT.2830, Department of Transport Technology, Delft University of

Technology.

[3] Lodewijks, G. (1991), “Object Oriented Programming in C++

(in Dutch)”, report no.

91.3.TT.2886, Department of Transport Technology, Delft University of Technology.

[4] Lodewijks, G. (1991), “Properties of EP Belts (in Dutch)”, report no. 91.3.TT.2916,

Department of Transport Technology, Delft University of Technology.

1992

[5] Lodewijks, G. (1992), “On the Simulation of Belt Conveyor Dynamics”, M.Sc. thesis,

report no. 92.3.TT.2984, Department of Transport Technology, Delft University of

Technology.

1993

[6] Lodewijks, G. (1993), “A Finite Element Approach to Calculate the Dynamic

Behavior of a Discontinuously supported Conveyor Belt”, report no. 93.3.TT.4051,

Department of Transport Technology, Delft University of Technology.

1994

[7] Lodewijks, G. (1994), “Transverse Vibrations in Flexible Belt Systems”, report no.

94.3.TT.4270, Department of Transport Technology, Delft University of Technology.

[8] Lodewijks, G. (1994), “The Design of Long Belt Conveyor Systems (in Dutch)”,

BULK 2 (4), pp. 58-60.

[9] Lodewijks, G. (1994), “Electrical Conductance of PVC Conveyor Belts (in Dutch)”,

BULK 2 (5), pp. 60-63.

[10] Lodewijks, G. (1994), “On the Application of Beam Elements in Finite Element

Models of Belt Conveyors, Part I”, Bulk Solids Handling 14, pp. 729-737.

1995

[11] Lodewijks, G. (1995), “The Rolling Resistance of Conveyor Belts”, Bulk Solids

Handling 15, pp. 15-22.

[12] Lodewijks, G. (1995), “The Life-length of Conveyor Belts (in Dutch)”, BULK 3 (1),

pp. 16-19.

[13] Lodewijks, G. (1995), “The Capacity of Profiled Conveyor Belts (in Dutch)”, BULK 3

(3), pp. 42-47.

26 / 44

[14] Lodewijks, G. (1995), “On the Optimization of the Idler Spacing”, BULK 3 (5), pp.

102-105.

[15] Lodewijks, G. (1995), “Present Research at Delft University of Technology, the

Netherlands”, 1995 5th

International Conference on Bulk Material Storage, Handling

and Transportation, Newcastle, Australia, July 10-12, 1995, The Institution of

Engineers, Australia Conference Pre-prints pp. 381-394.

[16] Lodewijks, G. (1995), “Belt Conveyors”, Chapter 9 of book “Processing and

Handling of Bulk Solids”, Technotrans, Vlaardingen.

[17] Lodewijks, G. (1995), “On the Application of Beam Elements in Finite Element

Models of Belt Conveyors, Part II”, Bulk Solids Handling 15, pp. 571-591.

[18] Lodewijks, G. (1995), “The two-dimensional Dynamic Behavior of Conveyor Belts”,

Proceedings of the Beltcon 8 Conference, Pretoria, RSA, October 24-26, 1995.

[19] Lodewijks, G. (1995), “Mechanic and Pneumatic Transport”, Chapter 2 of book “Bulk

Handling Systems Management”, Technotrans, Vlaardingen.

[20] Lodewijks, G. (1995), “Dynamics of Belt Conveyor Systems”, Proceedings of the

International Powder & Bulk Solids Conference Europe: Bulk ’95, Utrecht, the

Netherlands, October 30 - November 3, 1995.

1996

[21] Lodewijks, G. (1996), “Improving the Performance of the Slaufengurtförderer, a

theoretical contribution”, Department of Transport Technology, Delft University of

Technology.

[22] Lodewijks, G. (1996), “Bulk Handling (in Dutch)”, Eyes on Food 12 (1), page 21.

[23] Lodewijks, G. (1996), “Dynamics of Belt Systems”, Doctorate Thesis, Delft

University of Technology, Delft.

1997

[24] Lodewijks, G. (1997), “Non-linear Dynamics of Belt Conveyor Systems”, Bulk Solids


[25] Lodewijks, G. (1997), “The Power Consumption of Belt Conveyors (in Dutch)”,

BULK 5 (2), pp. 66-74.

[26] Lodewijks, G. (1997), “Maximizing Dynamic Analysis in Belt Conveyor Design”,

Proceedings of the Second Annual Improvements & Innovations in Bulk Material

Handling Conference, Denver, USA, March 20-21, 1997.

[15] Lodewijks, G. (1997), “The Design Life of Idlers (in Dutch)”, BULK 5 (3), pp. 50-56.

1998

[16] Lodewijks, G. (1998), “Pulley Failure (in Dutch)”,BULK 6 (3), pp. 48-51.

[17] Lodewijks, G. and Kruse, D. J. (1998), “The Power of Field Measurements-Part I”,

Bulk Solids Handling 18, pp. 415-427.

1999

[27] Lodewijks, G. (1999), “The Design of High Speed Belt Conveyors”, Proceedings of

the BeltCon 10 Conference, Midrand, 19-21 October 1999.

[28] Lodewijks, G. (1999), “The Design of High Speed Belt Conveyors (in Dutch)”, BULK

7(5), pp 40-45.

27 / 44

[29] Lodewijks, G. (1999), “The Design of High Speed Belt Conveyors”, Bulk Solids


2000

[18] Kubo, S., Lodewijks, G. and Newman, A. (2000) , “Putting the Pedal to the Metal”,

Proceedings of the 3rd Israeli Conference for Conveying and Handling of Particle

Solids, Dead Sea, May 29-June 1, 2000, pp. 14.37-14.42.

[19] Lodewijks, G., Kubo, S. and Newman, A. (2000), “The Ramla Cement Plant

Upgrade”, Bulk Solids Handling 20, pp. 149-152.

[20] Lodewijks, G. (2000), “Main editorial”, Bulk Solids Handling 20, pp. 137-139.

[21] Lodewijks, G. (2000), “Product liability (in Dutch)”, BULK 8(4), pp. 20-22.

[22] Lodewijks, G. (2000), “Research and Development in Closed Belt Conveyor

Systems”, Bulk Solids Handling 20, pp. 465-470.

2001

[23] Lodewijks, G., Kubo. S. and Newman, A. (2001), “Putting the pedal to the metal

(Chapter X)”, Handbook of Conveying and handling of Particulate Solids, ISBN 0-

444-50235, pp. 235-242.

[24] Lodewijks, G. (2001), “New Developments in Closed Belt Conveying Systems”,

Proceedings of the BULK 2001 conference, Dusseldorf, Germany, March 13-14, 2001,

pp. 1-11.

[25] Lodewijks, G. (2001), “Two Decades Dynamics of Belt Conveyor Systems”,

Proceedings of the BeltCon 11 conference, Randburg, Republic of South Africa, 31

July – 2 August, 2001, pp. 1-18.

[30] Lodewijks, G. (2001), “Modern Belt Conveyor Systems”, 2001 7th

International

Conference on Bulk Material Storage, Handling and Transportation, Newcastle,

Australia, October 3-5, 2001, The Institution of Engineers, Australia Conference Pre-

prints pp. 27-37.

[26] Lodewijks, G. (2001), “Buidelband Enerka-Becker kort door de bocht”, BULK 9(2),

pp. 26-30.

[27] Lodewijks, G. (2001),”Closed Belt Conveyor Systems – the state of the art”, Bulk

Solids Handling 21, pp. 592-599.

[28] Lodewijks, G. (2001), “Transport en logistiek; Hoe? Zo!/ Transport and logistics;

How? Thus!”, Intreerede, ISBN 90-370-0195-5.

[29] Lodewijks, G. and Rijsenbrij, J.C. (eds.) (2001), “Visions on transport and Logistics”,

Conference proceedings, ISBN 90-558-404-67.

[30] Boezeman, A.H., Lodewijks, G. and Bent, Y.G.J. van der (2001), “Kraanrijden door

de bocht”, Report Delft University of Technology nr. 2001.TT.5498.

2002

[31] Lodewijks, G. (2002), “Transport en logistiek; Hoe? Zo!, BULK 10(1), pp. 52-56.

[32] Lodewijks, G. (2002), “Two Decades Dynamics of Belt Conveyor Systems”, Bulk

Solids Handling 22, pp. 124-132.

[33] Ottjes, J.A., Lodewijks, G., Meeuwsen, K. and Hubert van Blijenburgh, W.O. (2002),

“Reverse time simulation in production line redesign”, 14th

European simulation

symposium, October 23-26, 2002, Dresden, Germany (pages 216-220).

28 / 44

[34] Duinkerken, M.D., Ottjes, J.A. and Lodewijks, G. (2002), “The application of

distributed simulation in Tomas: redesigning a complex transportation model”,

Proceedings of the 2002 Winter Simulation Conference San Diego, USA, 8-11

December 2002.

[35] Lodewijks, G. and Luiting Maten, J.H.D. (2002), “Wear of starglide belts in AWS

applications”, Report number 2002.TT.5650.

[36] Lodewijks, G. and Luiting Maten, J.H.D. (2002), “Final report baggage handling

system Ferry service Holwerd Nes”, Report number 2002.TT.5632.

[37] Lodewijks, G. (2002), “Report on Line Creek Conveyor Belt Tests”, Report number

2002.TT.5645.

[38] Lodewijks, G. (2002), “Reply report Luscar vs Laird”, Report number 2002.TT.6712.

2003

[39] Lodewijks, G. and Luiting Maten, J.H.D. (2003), “New baggage handling system for

Wagenborg Passenger Services”, Report number 2002.TT.5632.

[40] Mazzali, C, Mecheroni, R., Lodewijks, G. en Savkoor, A. (2003), “Control design of

active wing to enhance the ride comfort of passenger cars”, Proceedings of the 7th

international conference on fuel economy, safety and reliability of motor vehicles,

Bucharest, May 8-9, 2003, pages 157-164.

[41] Lodewijks, G. (2003), “Determination of rolling resistance of belt conveyors using

rubber data: fact or fiction?”, Proceedings of the BeltCon 12 conference, Randburg,

Republic of South Africa, 23 July – 24 July, 2003.

[42] Feijter, R. de, Evers, J.J.M., Lodewijks, G. (2003), “Improving travel time reliability

by the use of trip booking”, Proceedings of the 6th

IEEE International Conference on

Intelligent Transportation Systems, pp. 205-210, ISBN: 0-7803-8125-4.

[43] Lodewijks, G. (2003), “Strategies of automated maintenance of belt conveyors”,

Proceedings of the BulkIndia 2003 conference, Mumbai, India, 9 –11 December,

2003, pp. 311 - 328.


rubber data: fact or fiction?”, Proceedings of the BulkIndia 2003 conference, Mumbai,

India, 9 –11 December, 2003, pp. 290-310.

[45] Lodewijks, G. (2003), “Strategies of automated maintenance of belt conveyors”,

Proceedings of the BeltCon 12 conference, Randburg, Republic of South Africa, 23

July – 24 July, 2003.


rubber data: fact or fiction?”, Bulk Solids Handling 23 (6), pp. 384-391, ISSN 0173-

9980.

[47] Lodewijks, G. and Luiting Maten, J.H.D. (2003), “Nieuw baggagesysteem voor

Wagenborg Passagiersdiensten (in Dutch)”, Schip, Werf de Zee 13 (3), pp. 38-41.

2004

[48] Lodewijks, G. (2004), “Strategies for Automated Maintenance of Belt Conveyor

Systems”, Bulk Solids Handling 24 (1), pp. 16-22, ISSN 0173-9980.

[49] Lodewijks, G. and Ottjes, J.A. (2004), “Optimisation of Maintenance Strategies for

Large Scale Transport Systems”, Proceedings of the 8th

International Conference on

Bulk Materials Storage, Handling & Transportation, 5-8 July, Wollongong, Australia,

pp. 299-304, ISBN 085825 795 5.

29 / 44

[50] Lodewijks, G. and Pang, Y. (2004), “A Knowledge Based Expert System for

Intelligent Conveyor Belt Monitoring”, Proceedings of the 8th

International

Conference on Bulk Materials Storage, Handling & Transportation, 5-8 July,

Wollongong, Australia, pp. 317-321, ISBN 085825 795 5.

[51] Nutall, A. and Lodewijks, G. (2004), “An Overview of Multi-Actuator Belt

Conveyors”, Proceedings of the 8th

International Conference on Bulk Materials

Storage, Handling & Transportation, 5-8 July, Wollongong, Australia, pp. 278-282,

ISBN 085825 795 5.

[52] Lodewijks, G. and Ottjes, J.A. (2004), “Reliability of Large Scale Bulk Material

Handling Systems”, Bulk Solids & Powder Science & Technology 1, pp. 9-17, ISSN

1613-4370.

[53] Dam, K.H., Ottjes, J.A., Lodewijks, G. Verwater, Z., and Wagenaar, R.W. (2004),

“Intelligent Infrastructures: Distributed Intelligence in Transport System Control – an

Illustrative Example”, Proceedings of the 2004 IEEE International Conference on

Systems, Man and Cybernetics (IEEE SMC2004), The Hague, 10–13 October, ISBN

0-7803-8567-5.

[54] Ottjes, J.A., and Lodewijks, G. (2004), “Reliability of Large Scale Conveyor

Systems”, Proceedings of the 2nd International Industrial Simulation Conference,

Malaga, Spain, June 7-9, 2004, pp. 324-329, ISBN 90-77381-12-0.

[55] Veeke, H.P.M., and Lodewijks, G. (2004), “Simulation of Robotised Packaging

Lines”, Proceedings of the 2nd International Industrial Simulation Conference,

Malaga, Spain, June 7-9, 2004, pp. 343-348, ISBN 90-77381-12-0.

[56] Schmeitz, A.J.C., Jansen, S.T.H., Pacejka, H.B., Davis, J.C., Kota, N.N., Liang, C.G.

and Lodewijks, G. (2004), “Application of a semi empirical dynamic tyre model for

rolling over arbitrary road profiles”, International Journal of Vehicle Design 36, pp.

194-215, ISSN 0143-3369.

[57] Savkoor, A.R., Lodewijks, G., and Nutall, A.J.G. (2004), “Wet tire to road traction”,

Tire Technology International, pp. 116-121, ISSN 1462-4729.

[58] Lodewijks, G., Nutall, A.J.G. , Mazzali, C., Mecheroni, R. and Savkoor A.R. (2004),

“Ride comfort enhancement considering car body aerodynamics using actively

controlled spoilers”, Proceedings of the 18th

IAVSD symposium, Supplement to

Vehicle System Dynamics 41, pp. 162-171, ISBN 90-265-1972-9.

[59] Feijter, R. de, Evers, J.J.M., and Lodewijks, G. (2004), “Improving travel time

reliability by the use of trip booking”, IEEE Intelligent Transportation Systems, Vol.

5. Nr. 4, pp. 288-292, ISSN 1524-9050.

[60] Kim, C.W., Hong, K.S., and Lodewijks, G. (2004), “Anti-Sway Control of Container

Cranes as a Flexible Cable System”, Proceedings of the 2004 IEEE International

Conference on Control Applications, Tapei, Taiwan, September 2-4, 2004, pp. 1564-

1569, ISSN 7803-8633.

[61] Kim, C.W., Hong, K.S., and Lodewijks, G. (2004), “Anti-Sway Control of Container

Cranes:an active mass-damper approach”, Proceedings of the SICE Annual

Conference, pp. 1687-1692.

30 / 44

2005

[62] Lodewijks, G. and Ottjes, J.A. (2005), “Intelligent Belt Conveying Monitoring &

Control: Theory and Applications”, Proceedings of the BeltCon 13 conference,

Randburg, Republic of South Africa, 3 August – 5 August, 2005.

[63] Lodewijks, G. and Ottjes, J.A. (2005), “Application of Fuzzy Logic in Belt Conveyor

Monitoring and Control”, Proceedings of the BeltCon 13 conference, Randburg,

Republic of South Africa, 3 August – 5 August, 2005.

[64] Pang, Y. and Lodewijks, G. (2005), “Large-scale Belt System Maintenance Decision-

making by using Causal Modeling”, Proceedings of the 8th international IEEE

conference on Intelligent Transportation Systems, Vienna, Austria, 13 - 16 September,

2005.

[65] Veeke, H.P.M. and Lodewijks, G. (2005), “A Simulation Application Framework for

Production Planning and Scheduling”, Proceedings of the Industrial Simulation

Conference 2005, June 9-11, Berlin, Germany.

[66] Lodewijks, G., Ottjes, J.A. (2005), “Belt Conveyor Inspection Tools based on Fuzzy

Logic”, Bulk Solids Handling 25 (5), pp. 284-289.

[67] Duinkerken, M.B., Nuttall, A.J.G., Ottjes, J.A. and Lodewijks, G. (2005),

“Developing an AGV motion controller using simulation, emulation and prototyping”,

Proceedings of the 2005 IEEE Intelligent Vehicles Symposium, pp. 394-399.

[68] Lodewijks, G., Ottjes, J.A. (2005), “The application of Fuzzy Logic in belt conveyor

inspection tools”, Proceedings of the BulkAsia2005 conference, Mumbai, India,

November 16-18, 2005.

[69] Nuttall, A.J.G., Lodewijks, G. (2005), “Drive force and belt wear in a decentralized

driven belt conveyor”, Proceedings of the BulkAsia2005 conference, Mumbai, India,

November 16-18, 2005.

[70] Pang, Y., Lodewijks, G. (2005), “Agent based intelligent belt conveyor monitoring”,

Proceedings of the BulkAsia2005 conference, Mumbai, India, November 16-18, 2005.

[71] Wheeler, C.A., Versteegh, R.J., Lodewijks, G., and Roberts, A.W. (2005),

“Experimental Simulation of Conveyor Belt Cleaning”, Proceedings of the

BulkAsia2005 conference, Mumbai, India, November 16-18, 2005.

[72] Meijaard, J.P., Savkoor, A.R. and Lodewijks, G., “Potential for vehicle ride

improvement using both suspension and aerodynamic actuators”, ISIE 2005:

proceedings of the IEEE International Symposium on Industrial Electronics 2005,

Dubrovnic, Croatia, pp. 385-390.

[73] Lodewijks, G. and Ottjes, J.A., “Intelligent Belt Conveyor Monitoring”, Bulk

Handling Today, April 2006, pp. 17-24.

[74] Lodewijks, G. and Ottjes, J.A. (2005), “Onderhoudsmodel voor grootschalige

transportsystemen (in Dutch)”, Bulk 13 (3), pp. 40-42.

2006

[75] Pang, Y., Lodewijks, G. (2006), “Knowledge based maintenance decision making for

large scale belt conveyor systems”, Bulk Solids Handling 26 (1), pp. 63-71.

[76] Van Dam, K.H., Verwater-Lukzo, Z., Ottjes, J.A., and Lodewijks, G. (2006),

“Distributed intelligence in automated multi-vehicle systems”, International Journal

of Critical Infrastructures 2 (2-3), pp. 261-272.

[77] Nuttall, A.J.G., Lodewijks, G., and Klein Breteler, A.J. (2006), “Modelling rolling

contact phenomena in a pouch belt conveyor system”, Wear 260 (9-10), pp. 1081-

1089.

31 / 44

[78] Lodewijks, G., Veeke, H.P.M., and Lopéz de la Cruz, A.M. (2006), “Reliability of

RFID in Logistic Systems”, Proceedings of the 2006 IEEE International Conference

on Service Operations and Logistics, and Informatics, Shanghai, P.R. China, June 21-

23, 2006, pp. 971-976, ISBN 1-4244-0317-0/06.

[79] Pang, Y., Lodewijks, G. (2006), “A Novel Embedded Conductive Detection System

for Intelligent Conveyor Belt Monitoring”, Proceedings of the 2006 IEEE

International Conference on Service Operations and Logistics, and Informatics,

Shanghai, P.R. China, June 21-23, 2006, pp. 803-808, ISBN 1-4244-0317-0/06.

[80] Lopéz de la Cruz, A.M., Veeke, H.P.M., and Lodewijks, G. (2006), “Prognostics in

the control of logistic systems”, Proceedings of the 2006 IEEE International

Conference on Service Operations and Logistics, and Informatics, Shanghai, P.R.

China, June 21-23, 2006, pp. 1-5, ISBN 1-4244-0317-0/06.

[81] Lodewijks, G., Versteegh, C.R.J. (2006), “Implementing automatic condition

monitoring techniques on belt scraper systems”, Bulk Solids Handling 26 (4), pp. 252-

257.

[82] Lodewijks, G. (2006), “The Transport Loss Factor Revisited”, Proceedings of the 5th

International Conference for Conveying and Handling of Particulate Solids, Sorrento,

Italy, August 27-31, 2006 (key-note presentation).

[83] Schott, D.L., Lodewijks, G. (2006), “Analysis of Bulk Terminals: Changes for

Exploration”, Proceedings of the 5th

International Conference for Conveying and

Handling of Particulate Solids, Sorrento, Italy, August 27-31, 2006.

[84] Nuttall, A.J.G., Lodewijks, G. (2006), “Dynamics of Multiple Driven Belt Conveyor

Systems”, Proceedings of the 5th

International Conference for Conveying and

Handling of Particulate Solids, Sorrento, Italy, August 27-31, 2006.

[85] Pang, Y. Lodewijks, G. (2006), “Simulation based Knowledge Acquisition for On-line

Intelligent Belt Conveyor Monitoring”, Proceedings of the 5th

International

Conference for Conveying and Handling of Particulate Solids, Sorrento, Italy, August

27-31, 2006.

[86] Nuttall, A.J.G., Lodewijks, G. (2006), “Traction versus slip in a Wheel-driven belt

conveyor”, Mechanism and Machine Theory 41(11), pp. 1336-1345.

[87] Schott, D.L., Lodewijks, G. (2006), “Homogenization performance of mammoth

silos”, ZKG International 59 (8), pp. 63-71.

[88] Lodewijks, G., Nuttall, A.J.G., Kusmaningtyas, I. (2006), “Long Distance Passenger

Conveyors” , Proceedings of the 9th international IEEE conference on Intelligent

Transportation Systems, Toronto, Canada, September18-20, 2006.

[89] Duinkerken, M.B., van der Zee, M., and Lodewijks, G. (2006), “Dynamic free range

routing for automated guided vehicles”, Proceedings of the 2006 IEEE International

Conference on Networking, sensing, and Control, pp. 312-317.

[90] Duinkerken, M.B., Hoeven, T. Ter, and Lodewijks, G. (2006), “Simulating the

operational control of free ranging AGV’s”, proceedings of the 2006 IEEE Winter

Simulation Conference, Vol. 1-51515-1522.

[91] Duinkerken, M.B., Ottjes, J.A. and Lodewijks, G. (2006), “Comparison of routing

strategies for agv systems using simulation”, proceedings of the 2006 IEEE Winter

Simulation Conference, Vol. 1-51515-1530.

[92] Pang, Y., Lodewijks, G. (2006), “A Bayesian Belief Network Approach to Belt

Conveyor System Maintenance”, Proceedings of the BulkEurope2006 conference,

Barcelona, Spain, October 16-17, 2006.

[93] Schott, D.L., Lodewijks, G. (2006), “Open versus closed storage on bulk terminals”,

Proceedings of the BulkEurope2006 conference, Barcelona, Spain, October 16-17,

2006.

32 / 44

[94] Nuttall, A.J.G., Lodewijks, G. (2006), “Layout considerations for multiple driven belt

conveyors”, Proceedings of the BulkEurope2006 conference, Barcelona, Spain,

October 16-17, 2006.

[95] Veeke, H.P.M., Lodewijks, G. and Ottjes, J.A. (2006), “Conceptual Design of

Industrial Systems: an Approach to Support Collaboration”, Research in Engineering

Design 17(2), pp. 85-101.

[96] Ottjes, J.A., Veeke, H.P.M., Duinkerken, M.B., Rijsenbrij, J.C., and Lodewijks, G.

(2006), “Simulation of a multiterminal system for container handling”, OR Spectrum

28, pp. 447-468.

[97] Schott, D.L. Lodewijks, G. (2006), “Open versus Closed Storage on Bulk Terminals”,

Bulk Solids Handling 26 (8), pp. 540-545.

[98] Lopéz de la Cruz, A., Veeke, H.P.M. and Lodewijks, G. (2006), “Supply chain

innovation by using prognostic logistics”, proceedings of the Trail congress 2006.

[99] Gijt, M. de, Ottjes, J.A. and Lodewijks, G. (2006), “Multi skilled maintenance of a

high speed railway”, Proceedings of the Industrial Simulation Conference 2006,

Palermo, Italy, pp. 399-405.

[100] Pang, Y., Veeke, H.P.M. and Lodewijks, G. (2006), “A simulation based expert

system for process diagnostics”, 4th

International Industrial Simulation Conference,

Palermo, Italy, pp. 393-398.

[101] Moerman, S., Ottjes, J.A., Gorsira, M and Lodewijks, G. (2006), “Line availability

and material synchronization in liquid packing lines: a simulation study”, 4th

International Industrial Simulation Conference, Palermo, Italy, pp. 431-436.

[102] Veeke, H.P.M. and Lodewijks, G. (2006), “Effective job shop priority scheduling”, 4th

International Industrial Simulation Conference, Palermo, Italy, pp. 437-441.

2007

[103] Bruggen, A.C. van, Veeke, H.P.M., Lodewijks, G., and Lambalgen, F.K. (2007),

“Simulation of a holding unit between first aid center and specialty wards: a case

study”, Proceedings of the Industrial Simulation conference 2007, Delft, the

Netherlands, pp. 299-305.

[104] Gungen, S., Lopez de la Cruz, A.M., Veeke, H.P.M. , and Lodewijks, G. (2007),

“Simulating wireless monitoring in automated maintenance of belt conveyor systems”,

Proceedings of the Industrial Simulation conference 2007, Delft, the Netherlands, pp.

223-229.

[105] Kusumaningtyas, I., and Lodewijks, G. (2007), “Toward intelligent power

consumption optimization in long high-speed passenger conveyors”, Proceedings of

the 2007 IEEE Intelligent Transportation Systems Conference, Seattle, USA, pp. 597-

601.

[106] Kusumaningtyas, I., Paro, J.C., and Lodewijks, G. (2007), “Accelerating moving

walkways for quality people transport in airports: an assessment of their applicability

in Amsterdam airport”. Proceedings of the European transport conference London

2007, pp. 1-13.

[107] Lodewijks, G., and Nuttall, A.J.G. (2007), “Dynamics of decentralized driven belt

conveyors”, Bulk solids and powder science and technology 2, pp. 125-136.

[108] Lodewijks, G., Schott, D.L., and Ottjes, J.A. (2007), “Modern dry bulk terminal

design”, Bulk solids handling 27(6), pp. 364-376.

[109] Lodewijks, G. (2007), “The design of conveyor belting for pipe conveyors”,

Proceedings of the 9th International Conference Bulk Material Storage, Handling and

Transportation, Newcastle, Australia, pp. 1-10.

33 / 44

[110] Lodewijks, G., and Nuttall, A.J.G. (2007), “Dynamics of decentralized driven belt

conveyors”, Proceedings of the 9th International Conference Bulk Material Storage,

Handling and Transportation, New Castle, Australia, pp. 125-170.

[111] Lodewijks, G., Schott, D.L., and Ottjes, J.A. (2007), “Modern dry bulk terminal

design”, Proceedings of BeltCon 14, Johannesburg, South Africa, pp. 1-17.

[112] Lodewijks, G., Duinkerken, M.B., Lopez de la Cruz, A.M., and Veeke, H.P.M. (2007),

“The application of FRID technology in belt conveyor systems”, Proceedings of

BeltCon 14, Johannesburg, South Africa, pp. 1-17.

[113] Lodewijks, G. (2007), “Airport systems”, Lezing: Schiphol (2007, november 20,

2007.

[114] Lopez de la Cruz, A.M., Veeke, H.P.M., Lodewijks, G. (2007), “Applicability of

RFID in prognostic logistics”, Proceedings of 2007 IEEE/INFORMS International

conference on Service Operations and Logistics and Informatics, Danvers, MA, USA,

pp. 478-482.

[115] Nuttall, A.J.G., and Lodewijks, G. (2007), “Dynamics of multiple drive belt conveyor

systems”, Particle & particle systems characterization 2 (5), pp. 365-369.

[116] Ottjes, J.A., Lodewijks, G., and Schott, D.L. (2007), “Bulk terminal modeling and

simulation”, Proceedings of the Industrial Simulation conference 2007, Delft, the


[117] Pang, Y., and Lodewijks, G. (2007), “Simulation-based knowledge acquisition for

intelligent belt conveyor monitoring”, Particle & particle systems characterization 2

(5), pp. 360-364.

[118] Riet, O.A.W.T. van de, Wee, G.P. van, Santema, S.C., and Lodewijks, G. (2007),

“Delft Aviation Agenda: Aviation research Highlights of Delft Centre for Aviation,

Symposium Delft Aviation Agenda”, Delft, pp. 1-10.

[119] Schott, D.L., and Lodewijks, G. (2007), “Analysis of dry bulk terminals: chances for

exploration”, Particle & particle systems characterization 2 (5), pp. 375-380.

[120] Schott, D.L., and Lodewijks, G. (2007), “A tool to assess the effectiveness of spillage

prevention measures”, Proceedings of the 9th International Conference Bulk Material

Storage, Handling and Transportation, New Castle, Australia, pp. 1-10.

[121] Schott, D.L., and Lodewijks, G. (2007), “The reclaim screw in mammoth silos

operating on a free surface in cohesive material”, Proceedings of the 9th International

Conference Bulk Material Storage, Handling and Transportation, New Castle,

Australia, pp. 1-14.

2008

[122] Carmona Benitez, R.B., and Lodewijks, G. (2008), “Literature review of the airport

business”, Proceeding of the 10th trail congress and knowledge market, pp. 1-12.

[123] Carmona Benitez, R.B. Lodewijks, G. (2008), “Literature review of the passenger

airline business models - full service carrier, low-cost carrier and charter airlines”,

Proceeding of the 10th trail congress and knowledge market, pp. 1-15.

[124] Kusumaningtyas, I. , and Lodewijks, G (2008), “Accelerating moving walkway: a

review of the characteristics and potential application”, Transportation research part

a-policy and practice 42, 591-609, ISSN 0965-8564.

[125] Lodewijks, G., Lopez de la Cruz, A.M., and Veeke, H.P.M. (2008), “A Decision

Support System for rfid”, Proceedings of the 6th Industrial simulation conference

2008, Ostend, Belgium, pp. 313-316.

34 / 44

[126] Lodewijks, G., and Nuttall, A.J.G. (2008), “Dynamics of long belt conveyors with

distributed drives”, In Mark Alspaugh (Ed.) Bulk material handling by conveyor belt,

pp. 13-23.

[127] Lopez de la Cruz, A.M., Veeke, H.P.M., and Lodewijks, G. (2008), “Performance

measurement of rfid”, Proceedings of the 6th Industrial simulation conference 2008,

Lyon, France, pp. 317-320.

[128] Lopez de la Cruz, A.M., Veeke, H.P.M., and Lodewijks, G. (2008), “Wireless

monitoring of belt conveyor systems”, Proceedings of the BulkEurope 2008, Prague,

Czech Republic, pp. 1-13.

[129] Roben, S.A., Ottjes, J.A., Dool, A. van der, and Lodewijks, G. (2008), A design

approach for asset supply logistics, Proceedings of the 6th Industrial simulation

conference 2008, Lyon, France, pp. 288-292.

[130] Schott, D.L., and Lodewijks, G. (2008), Experimental results of a reclaim screw in

cohesive material, Bulk solids and powder science and technology 3(1), pp. 33-41.

[131] Schott, D.L., Maan, O.C., Spaargaren, R., Ruijgrok, J.L.J., Welink, J.H., Dekkers,

J.A.J.M., Pang, Y., and Lodewijks, G. (2008), Environmental management accounting

applied for storage systems, Bulk solids handling 28(7), pp. 464-474.

[132] Schott, D.L., Maan, O.C., Spaargaren, R., Ruijgrok, J., Welink, J.H., Dekkers,

J.A.J.M., Pang, Y., and Lodewijks, G. (2008), Environmental management accounting

as a selection tool for storage systems, Proceedings of the BulkEurope 2008, Prague,

Czech Republic, pp. 1-12.

[133] Veeke, H.P.M., Ottjes, J.A., and Lodewijks, G. (2008), Implementation of the process

interaction approach in a general-purpose language, Proceedings of the 6th Industrial

simulation conference 2008, Lyon, France, pp. 65-70.

[134] Veeke, H.P.M., Ottjes, J.A., and Lodewijks, G. (2008), The delft systems approach,

London: Springer-Verlag London Limited.

[135] Wu, M., Schott, D.L., and Lodewijks, G. (2008), Possibility of a large-scale biomass

bulk terminal in the hamburg - le havre region, Proceedings of the European

conference 16th European biomass conference, Florence, Italy, pp. 464-474.

[136] Wu, M., Schott, D.L., and Lodewijks, G. (2008), “On the potential for a large-scale

biomass bulk terminal in the west European region”, Proceeding of the 10th trail

congress - trail in perspective - selected papers (10), Delft, pp. 255-282.

[137] Pang, Y., Lopez la Cruz, A. and Lodewijks, G., “Bipolar magnetic positioning system

for automated guided vehicles”, 2008 IEEE Intelligent Vehicle Symposium, Vol. 1-3

pp. 620-625.

[138] Lopez de la Cruz, A.M., Veeke, H.P.M., and Lodewijks, G. (2008), “Energy harvester

for sensor nodes in the wireless monitoring of belt conveyor systems”, Proceedings of

the 10th

international conference on application of advanced technologies in

transportation AATT, May 27-31, Athens, Greece, pp. 1-12.

2009

[139] Lodewijks, G., Schott, D.L. and Ottjes, J.A. (2009), “Logistic control of modern dry

bulk terminals”, Proceedings of the Beltcon 15 conference, Johannesburg, South

Africa, pp. 1-14.

[140] Lodewijks, G. ed. (2009), Current developments in Bulk Solids Handling, Vögel

Industrie Medien GMBH, Wurzburg, Germany.

[141] Lodewijks, G. and Welink J.H. (2009), “The environmental impact of transport

systems”, Proceedings of the Chops 2009 conference, Brisbane, Australia, pp. 8-14,

ISBN 978-0858259065.

35 / 44

[142] Schayk, M. van, Veeke, H.P.M. and Lodewijks, G. (2009), A Simulation Integrated

Design Approach for Agribulk Terminal Design, Proceedings of the Chops 2009

conference, Brisbane, Australia, pp. 816-822, ISBN 978-0858259065.

[143] Schott, D.L., Rijsenbrij J.C. and Lodewijks, G. (2009), Spillage measurements during

grab unloading of bulk carriers, Proceedings of the Chops 2009 conference, Brisbane,

Australia, pp. 249-255, ISBN 978-0858259065.

[144] Hilterman, J., Lodewijks, G., Rijsenbrij J.C., Schott, D.L., Dekkers, J.A.M.J., and

Pang, Y. (2009), Reducing the electrical power consumption of troughed belt

conveyors by speed control, Proceedings of the Chops 2009 conference, Brisbane,

Australia, pp. 345-353, ISBN 978-0858259065.

[145] Lopez de la Cruz, A.M., Veeke, H.P.M., and Lodewijks, G. (2009), “On the intelligent

idler concept”, Proceedings of the MHEA’s annual Technical Awareness Seminar

2009, Blackpool, England, pp. 45-57.

[146] Wijngaarden, M.J. van, Schott, D.L. and Lodewijks, G. (2009), “How to assess the

effectiveness of spillage prevention measures in dry bulk solids handling?”, Bulk

Solids & Powder Science & Technology 4 (1), pp. 1-8 (ISSN 1613-4370).

[147] Duinkerken, M.B., Ottjes, J.A. and Lodewijks, G., “Comparison of routing methods

for automated guided vehicles”, Proceedings of the Huntsville Simulation Conference

2009, Huntsville, October 27-29, 2009, pp. 1-7.

[148] Lodewijks, G., Schott, D.L., and Ottjes, J.A. (2009), “Dry bulk terminal expansion or

redesign?”, Port Technology International 43, pp. 87-94.

[149] Jeon, S., Duinkerken, M.B., and Lodewijks, G. (2010), “Dynamic routing strategies

for automated container terminals”, Proceedings of the European modeling and

simulation conference 2009, Ostend, October 26-28, 2009, pp. 109-113.

2010

[150] Röben, S., Ottjes, J.A., Lodewijks, G. And Dool, A. Van den (2010), “A design

approach for asset supply logistics”, International Journal of Computer Aided

Engineering and Technology, Vol. 2, No. 4, pp. 311-323.

[151] Carmona Benitez, R.B. and Lodewijks, G. (2010), “Low-cost and full-service carriers

effect”, proceedings of the ATOS 2010 conference, April 14-15, 2010, Delft, the


[152] Carmona Benitez, R.B. and Lodewijks, G. (2010), “Low-cost carriers fare competition

effect”, proceedings of the 14th

ATRS conference, July 6-9, 2010, Porto, Portugal, pp.

1-31.

[153] Lodewijks, G., Drenth, K.F. and Mel, P.S. van der (2010), “The rotation of pipe

conveyors”, Proceedings of Bulk Solids India 2010, March 2&3, Mumbai, India , pp

1-13.

[154] Lodewijks, G., Drenth, K.F. and Mel, P.S. van der (2010), “The rotation of pipe

conveyors”, Bulk Solids Handling 30(4), pp. 144-148.

[155] Lodewijks, G., Lopez de la Cruz, A.M., and Veeke, H.P.M. (2010), “Wireless

condition monitoring of idler rolls in heavy duty belt conveyors”, Proceedings of the

7th

international conference on condition monitoring and machinery failure prevention

technologies, June 22-24, 2010, Ettington Chase, Stratford-upon-Avon, England, pp.

1-13.

[156] Wu, M., Schott, D.L. and Lodewijks, G. (2010), “Properties and handling equipment

of solid biomass as feedstock for bio-energy applications”, Proceedings of Bulk Solids

India 2010, March 2&3, Mumbai, India , pp. 1-16.

36 / 44

[157] Carmona Benitez, R.B. and Lodewijks, G. (2010), “A mathematical model to predict

the US airlines operation costs and airport charges per route per passenger”,

Proceedings of the 11th

TRAIL conference, November 23-24, 2010, Rotterdam, pp 1-

21.

[158] Wu, M., Schott, D.L. and Lodewijks, G. (2010), “Impact of future sustainability

certification systems on the design of a large-scale biomass bulk terminal”


TRAIL conference, November 23-24, 2010, Rotterdam, pp 1-8.

[159] Carmona Benitez, R.B. and Lodewijks, G. (2010), “Low cost carriers fare competition

effect”, Proceedings of the 14th

ATRS conference, Porto, July 6-7, 2010, pp. 1-31.

[160] Duijn, R. van, Veeke, H.P.M., Brans, T.M. and Lodewijks, G. (2010), “The added

value of simulation during liquid bulk terminal design”, Proceedings of the European

modeling and simulation conference 2010, Ostend, October 25-27, 2010, pp. 294-298.

[161] Haardt, E.R.W., Ottjes, J.A., Delft, B.J.H. van, and Lodewijks, G. (2010), “Vendor

managed inventory in the inbound supply chain in the soft drink industry”,

Proceedings of the European modeling and simulation conference 2010, Ostend,

October 25-27, 2010, pp. 396-400.

[162] Horst, T. ter, Ottjes, J.A., Scherpenzeel, M.N. van, and Lodewijks, G. (2010), “Lead

time analysis of passengers and baggage at Amsterdam airport Schiphol”, Proceedings

of the European modeling and simulation conference 2010, Ostend, October 25-27,

2010, pp. 366-370.

[163] Leeuwen, E.E. van, Veeke, H.P.M., Stappen, R., and Lodewijks, G. (2010), “AGV’s

in production environment – a flexible and modular transport system for production”,

Proceedings of the European modeling and simulation conference 2010, Ostend,

October 25-27, 2010, pp. 299-305.

[164] Pang, Y., and Lodewijks, G. (2010), “Three decades monitoring of belt conveyor

systems”, Proceedings of the Bulk Solids Europe 2010 conference, Glasgow,

September 9-10, 2010, pp. 1-10.

[165] Rahman, M., Katterfeld, A., Schott, D.L., and Lodewijks, G. (2010), “Influence of the

software on the calibration process of DEM simulations”, Proceedings of the Bulk

Solids Europe 2010 conference, Glasgow, September 9-10, 2010, pp. 1-8.

[166] Rahman, M., Schott, D.L., Miedema, S.A., and Lodewijks, G. (2010), “Simulation of

cutting process by hybrid granular and multibody dynamics software”, Proceedings of

the Bulk Solids Europe 2010 conference, Glasgow, September 9-10, 2010, pp. 1-8.

[167] Wu, K., Ottjes, J.A., Schott, D.L., and Lodewijks, G. (2010), “Design of a large scale

biomass bulk terminal aided by a simulation model”, Proceedings of the Bulk Solids

Europe 2010 conference, Glasgow, September 9-10, 2010, pp. 1-12.

2011

[168] Thijssen, G.J., Schott, D.L., Demmink, E.W., and Lodewijks, G. (2011), “Reducing

drying energy and costs by process alterations at aggregate stockpiles”, Energy

Efficiency 4 (2), pp. 223-233.

[169] Hilterman, J., Lodewijks, G., Rijsenbrij J.C., Schott, D.L., Dekkers, J.A.M.J., and

Pang, Y. (2011), “A methodology to predict power savings of troughed belt conveyors

by speed control”, Particulate science and technology 29 (1), pp. 14-27.

[170] Wu, K., Schott, D.L., and Lodewijks, G. (2011), “Physical properties of solid

biomass”, Biomass and Bioenergy 35 (5), pp. 2093-2105.

[171] Lodewijks, G. (2011), “The next generation low loss conveyor belts”, Proceedings of

the BeltCon 16 conference, August 3-4, Johannesburg, South Africa, pp. 1-16.

37 / 44

[172] Lodewijks, G. (2011), “Energy savings at belt conveyors by speed control”,

Proceedings of the BeltCon 16 conference, August 3-4, Johannesburg, South Africa,

pp. 1-10.

[173] Carmona Benitez, R.B. and Lodewijks, G. (2011), “Proposition of a mathematical

model for selecting possible low-cost airlines routes”, Journal of Aerospace

Operations 1, pp. 1-24.

[174] Lodewijks, G., Schott, D.L., Pang, Y., Vianen, T.A. van, and Ottjes, J.A. (2011),

“Bulk open overslag in wetenschappelijk perspectief”, BULK 5, pp. 18-19.

[175] Lommen, S.W., Schott, D.L., Rahman, M. and Lodewijks, G. (2011), “The penetration

of iron ore pellets: calibrating discrete element parameters using penetration tests”,

Proceedings of the Particulate Systems Analysis 2011 Conference, Edinburgh, UK,

September 5-7, 2011, pp. 1-5.

[176] Pang, Y. and Lodewijks, G. (2011), “Improving energy efficiency in material transport

systems by fuzzy speed control”, Proceedings of the 3rd IEEE international

symposium on logistics and industrial informatics, Budapest, Hungary, August 25-27,

2011, pp. 159-164.

[177] Pang, Y. and Lodewijks, G. (2011), “Machinery maintenance prediction using pattern

recognition of condition monitoring data”, Proceedings of the eighth international

conference on condition monitoring and machinery failure prevention technologies,

Cardiff, UK, June 20-22, 2011, pp. 1-10.

[178] Pang, Y. and Lodewijks, G. (2011), “The application of RFID technology in large-

scale dry bulk material transport system monitoring”, Proceedings of the 2011 IEEE

workshop on environmental, energy and structure monitoring systems, Milan, Italy,

September 28, 2011, pp. 5-9.

[179] Schott, D.L., Roex, E., Rijsenbrij, J.C., and Lodewijks, G. (2011), “Effect of spillage

on water quality during transshipment of dry bulk solids”, Proceedings of the 1st IEEE

forum on integrated and sustainable transportation systems, Vienna, Austria, June 29

– July 1, 2011, pp. 141-145.

[180] Vianen, T.A. van, Ottjes, J.A. and Lodewijks, G. (2011), “Dry bulk terminal

characteristics”, Proceedings of the Bulk Solids India 2011 conference, Mumbai,

India, April 6-8, 2011, pp. 1-10.

[181] Wu, M., Schott, D.L. and Lodewijks, G. (2011), ”Physical properties of solid

biomass”, Biomass & Bioenergy 35, pp. 2093-2105.

[182] Wu, M., Ottjes, J.A., Schott, D.L. and Lodewijks, G. (2011), “Material handling and

logistic flows at a large-scale biomass bulk terminal”, Proceedings of the 19th

European biomass conference and exhibition, Berlin, Germany, June 6-10, 2011, pp.

2452-2459.

[183] Wu, M., Ottjes, J.A., Schott, D.L. and Lodewijks, G. (2011), “Biomass bulk terminals-

simulation and design of large-scale operations”, Bulk Solids Handling 31(1), pp. 32-

37.

[184] Duinkerken, M.B., Schott, D.L., Geest, J.T. van (extern), Stoop, P. (extern) &

Lodewijks, G. (2011), “Simulation as tool to estimate the homogenization efficiency

of bulk material handling”, Modeling and simulation 2011. The European simulation

and modeling conference 2011 esm 2011 (pp. 300-305).

2012

[185] Lodewijks, G. (2012), “The Next Generation Low Loss Conveyor Belts”, Bulk Solids

Handling 32 (1), pp. 52-56.

38 / 44

[186] Lodewijks, G. (2012), “Energy Efficient Use of Belt Conveyors in Baggage Handling

Systems”, Proceedings 9th IEEE International Conference on Networking, Sensing

and Control, April 11-14, 2012, Beijing, China.

[187] Lodewijks, G.(2012), “Next generation low loss conveyor belts”, Bulk Handling

Today, pp. 19-29.

[188] Lodewijks, G.(2012), “Nova generacja energooszczędnych przenośników

taśmowych”, Transport 3 (17) (przemystowy i maszyny robocze), pp. 12-22.

[189] Lodewijks, G.(2012), “Energie besparen op transportband”, Solids processing

Benelux, pp. 60-61.

[190] Bruin, B. de, Schott, D.L., Ottjes, J.A., Duinkerken, M.B., Demmink, E.W. and

Lodewijks, G.(2012), “Dynamic moisture distribution in stockpiles for asphalt

production”, Proceedings of the 7th international conference for conveying and

handling of particulate solids, September 10-13, Frankfurt am Main, Germany, pp. 1-

6.

[191] Derakhshani, S.M., Schott, D.L. and Lodewijks, G. (2012), ”Reducing computational

time by adjusting domain frame for fine granular materials with discrete element

method”, Proceedings of the Bulk Solids Europe conference 2012, October 11-12,

Berlin, Germany, pp. 1-8.

[192] Lommen, S.W., Schott, D.L. and Lodewijks, G. (2012), ”Multibody dynamics model

of a scissors grab for co-simulation with discrete element method”, FME Transactions

40(4), 177-180.

[193] Lommen, S.W., Schott, D.L. and Lodewijks, G.(2012), “Developing a dem model of a

grab”, Proceedings of the Bulk Solids Europe conference 2012, October 11-12, Berlin,

Germany, pp. 1-8.

[194] Lommen, S.W., Schott, D.L. and Lodewijks, G. (2012), “Validation of a multibody

dynamics model of a scissors grab for dem modeling”, Proceeding of the xx

international conference on material handling, constructions and logistics, October 3-

5, Belgrade, Serbia, pp. 61-64.

[195] Lommen, S.W., Schott, D.L. and Lodewijks, G. (2012), “Dem speedup: stiffness

effects on bulk material behavior”, Proceedings of the 7th international conference for

conveying and handling of particulate solids, September 10-13, Frankfurt am Main,

Germany, pp. 1-7.

[196] Miszewski, A., Lommen, S.W., Schott, D.L. and Lodewijks, G. (2012), “Effect of

moisture content on the angle of repose of iron ore”, Proceedings of the 7th

international conference for conveying and handling of particulate solids, September

10-13, Frankfurt am Main, Germany, pp. 1-9.

[197] Mutu, A., Pang, Y., and Lodewijks, G. (2012), “Methods for the safety integrity

determination of an e/e/pe system”, Proceedings of the Elevcon 2012 conference, May

23-24, Maimi, USA, pp. 1-9.

[198] Pang, Y., Lodewijks, G., and Schott, D.L. (2012), “Energy Saving Solutions for Belt

Conveyors”, Proceedings of the 2012 Asian Pacific Conference on Energy and

Sustainable Development, November 12-13, Kuala Lumpur, Malaysia, pp. 1-8.

[199] Pang, Y. and Lodewijks, G. (2012), “Test and simulation of pipe conveyor statics”,

Proceedings of the Bulk Solids Europe conference 2012, October 11-12, Berlin,

Germany, pp. 1-8.

[200] Pang, Y. and Lodewijks, G. (2012), “Agent-based Intelligent Monitoring in Large-

scale Continuous Material Transport”, Proceedings 9th IEEE International

Conference on Networking, Sensing and Control, April 11-14, 2012, Beijing, China

[201] Parasuraman, D., Kemps, A., Veeke, H.P.M., and Lodewijks, G. (2012), “Prediction

Model for Particle Fallout in Cleanrooms”, Journal of the IEST 55 (1), pp. 1-9.

39 / 44

[202] Sande, T. van de, Ottjes, J.A. and Lodewijks, G. (2012), “Logistic chain optimization

for importing coal on inland waterways in eastern India”, Proceedings of the 10th

international industrial simulation conference, June 4-6, Brno, Czech Republic, pp.

146-150.

[203] Veeke, H.P.M., Ottjes, J.A. and Lodewijks, G. (2012), “Experiences with process

interaction based simulation in education and research”, Proceedings of the

International Conference on Modeling, Simulation and Visualization Methods, July

16-19, Las Vegas, USA, pp. 109-113.

[204] Velden, M.P.W. van der, Veeke, H.P.M. and Lodewijks, G. (2012), “The redesign of

the process control of concrete systems ltd pty for a more effective and efficient

production process”, Proceedings of the 10th international industrial simulation

conference, June 4-6, Brno, Czech Republic, pp. 174-178.

[205] Vermeer, B., Schuurmans, R.A.H. and Lodewijks, G. (2012), “Analysis of the

increased maximum load occurrences of bulk cranes”, Proceedings of the Bulk Solids

Europe conference 2012, October 11-12, Berlin, Germany, pp. 1-9.

[206] Vianen, T. van, Mooijman, D., Ottjes, J.A., Negenborn, R., and Lodewijks, G. (2012)

“Simulation-based Operational Control of a Dry Bulk Terminal”, Proceedings 9th

IEEE International Conference on Networking, Sensing and Control, April 11-14,

2012, Beijing, China.

[207] Vianen, T.A. van, Stoop, P., Schuurmans, R.A.H., Ottjes, J.A. and Lodewijks, G.

(2012), “Measuring and Improving Dry Bulk Terminal Performance”, Proceedings of

the Mechanical Handling Engineering Association Bulk Handling Conference 2012,

May 15-15, Broughton, UK, pp. 1-6.

[208] Vianen, T.A. van, Ottjes, J.A. and Lodewijks, G. (3ME-MTT-TEL Transport

Engineering and Logistics) (2012), “Stockyard Dimensioning for Dry Bulk

Terminals”, Proceedings of the Trail-beta congress 2012, October 30-31, Rotterdam,

The Netherlands, pp. 1-15.

[209] Vianen, T.A. van, Ottjes, J.A. and Lodewijks, G. (2012), “Modeling the Arrival

Process at Dry Bulk Terminals, Proceedings of the Bulk Ports, Terminals and

Logistics 2012 conference, May 20-22, Amsterdam, The Netherlands, pp. 1-5.

[210] Xin, J., Negenborn, R. and Lodewijks, G. (2012). “Optimal control for coordination of

equipment in automated container terminals”, Proceedings of the Trail-beta congress

2012, October 30-31, Rotterdam, The Netherlands, pp. 1-19.

[211] Zamiralova, M. and Lodewijks, G. (2012), “Energy consumption of pipe belt

conveyors: indentation rolling resistance”, FME Transactions 40(4), 171-176.

[212] Zamiralova, M. and Lodewijks, G. (2012), “The shear center effect in the twisting of

pipe conveyors”, Proceedings of the Bulk Solids Europe conference 2012, October 11-

12, Berlin, Germany, pp. 1-12.

[213] Zamiralova, M. and Lodewijks, G. (2012), “The indentation rolling resistance of pipe

belt conveyors”, Proceeding of the xx international conference on material handling,

constructions and logistics, October 3-5, Belgrade, Serbia, pp. 65-70.

2013

[214] Carmona Benitez, R.B., Carmona Paredes, R.B., Lodewijks, G. and Nabais, J.L.

(2013), “Damp trend grey model forecasting method for airline industry”, Expert

Systems with Applications 40 (12), pp. 4915-4921.

[215] Derakhshani, S.M., Schott, D.L. and Lodewijks, G. (2013), “Dust emission modeling

around a stockpile by using computational fluid dynamics and discrete element

method”, In A Yu, K Dong, R Yang & S Luding (Eds.), Proceedings of the 7th

40 / 44

International Conference on Micromechanics of Granular Media Vol. 1542. AIP

Conference Proceedings, Melville, NY, USA: AIP Publishing, pp. 1055-1058.

[216] Derakhshani, S.M., Schott, D.L. and Lodewijks, G. (2013), “Modeling dust liberation

at the belt conveyor transfer point with CFD and DEM”, In s.n. (Ed.), 11th

international congress on bulk materials storage, handling and transportation, The

University of Newcastle, pp. 1-11.

[217] Derakhshani, S.M., Schott, D.L. and Lodewijks, G. (2013), “Reducing computation

time of DEM simulations of fine granular materials”, Bulk Solids Handling 6, pp. 52-

56.

[218] Duinkerken, M.B., Ottjes, J.A. and Lodewijks, G. (2013), “Off the beaten track with

free ranging AGV’s”, In HO Gunther, KH Kim & H Kopfer (Eds.), The 2012

international conference on logistics and maritime systems, pp. 37-46.

[219] Hondel, G. van den and Lodewijks, G. (2013), “Travelling light”, Materials World 13,

pp. 32-34.

[220] Kusumaningtyas, I. and Lodewijks, G. (2013), “On the application of accelerating

moving walkways to support passenger processes in Amsterdam Airport Schiphol”,

Transportation Planning and Technology 36 (7), pp. 617-635.

[221] Li, S., Negenborn, R.R. and Lodewijks, G. (2013), “Survey on planning problems in

inland waterway transport: current status and future perspectives” In B. van Arem &

H. van Lint (Eds.), Proceedings of the 16th international ieee annual conference on

intelligent transportation systems (itsc2013), pp. 1231-1237.

[222] Lodewijks, G. and Pang, Y. (2013), “Belt de-tensioning in dips”, In s.n. (Ed.), Beltcon

17, Fourways: IMHC, pp. 1-17.

[223] Lodewijks, G. (2013), “Energy saving options for continuous transport systems used

in mines, an exploration”, In F. Hassani & et al (Eds.), Proceedings 23rd World

Mining Congress, Westmount, Canada: CIM, pp. 1-20.

[224] Lodewijks, G. and Pang, Y. (2013), “The application of flywheels on belt conveyors”,

In s.n. (Ed.), Beltcon 17, Fourways: IMHC, pp. 1-10.

[225] Lodewijks, G. (2013), “Saving costs through innovation in the mining industry”,

Aramid Vision 3, pp. 10-13.

[226] Lodewijks, G. (2013), “Stockyard layout (re)design”, In s.n. (Ed.), Bulk ports,

terminals & logistics 2013, pp. 1-22.

[227] Lommen, S.W., Schott, D.L. and Lodewijks, G. (2013), “Validation of a co-simulation

of a grab using discrete element method and multibody dynamics models”, In M Jones

(Ed.), Proceedings of the 11th international conference on bulk materials storage,

handling and transportation Callaghan: The University of Newcastle, pp. 1-13.

[228] Nieuwkoop, F., Corman, F., Negenborn, R.R. and Lodewijks, G. (2013),

“Determining Inter Terminal Transport configurations at Maasvlakte 1 and 2 by

integer programming”, In Weijers, Dullaert & de Jonge (Eds.), Proceedings 20e

Vervoerslogistieke Werkdagen, Venlo, The Netherlands: VLW, pp. 1-14.

[229] Pang, Y., Lodewijks, G. and Schott, D.L. (2013), “Fuzzy controlled energy saving

solution for large-scale belt conveying systems”, Applied Mechanics and Materials

260-261, pp. 59-64.

[230] Pang, Y. and Lodewijks, G. (2013), “Pipe belt conveyor statics-comparison of

simulation results and measurements”, Bulk Solids Handling 33, pp. 52-56.

[231] Pang, Y. and Lodewijks, G. (2013), “A remote intelligent belt conveyor inspection

tool”, In s.n. (Ed.), 11th international congress on bulk materials storage, handling and

transportation, Australia: University of Newcastle, pp. 1-8.

[232] Pang, Y., Veeke, H.P.M. and Lodewijks, G. (2013), “Design of tracing and tracking

network for educational building utilization”, In S. Segala & et al. (Eds.), Proceedings

41 / 44

10th IEEE International Conference on Networking, Sensing and Control, Piscataway,

NJ, USA: IEEE, pp. 276-281.

[233] Riessen, B. van, Negenborn, R.R., Dekker, R. and Lodewijks, G. (2013), “Analysis of

impact and relevance of transit disturbances in an intermodal container network”, In

LC Tang & KH Kim (Eds.), Proceedings 3rd International Conference on Logistics

and Maritime Systems, Singapore: National University of Singapore. pp. 1-12.

[234] Riessen, B. van, Negenborn, R.R., Dekker, R. and Lodewijks, G. (2013), “Service

network design for an intermodal container network with flexible due dates/times and

possibility of using subscontracted transport”, In X Fu (Ed.), Proceedings of the

international forum on shipping, ports and airports Hong Kong: Hong Kong

polytechnic university, pp. 256-265.

[235] Vermeer, B., Schuurmans, R.A.H., Schott, D.L. and Lodewijks, G. (2013), “Reducing

increased maximum load occurrences of bulk cranes”, Bulk Solids Handling 33 (4),

pp. 52-56.

[236] Vianen, T.A. van, Ottjes, J.A. and Lodewijks, G. (2013), “Operational control for

stacker/reclaimers”, In Bruzzone, Gronalt, Merkuryev & Piera (Eds.), International

conference on harbor maritime and multimodal logistics m&s,. rende: Dime

Universita di Genova, pp. 1-6.

[237] Vianen, T.A. van, Ottjes, J.A. & Lodewijks, G. (2013), “Stockyard sizing: crucial in

the dry bulk supply chain”, Amsterdam Moving Minerals 2013, pp. 1-6.

[238] Xin, J., Negenborn, R.R. and Lodewijks, G. (2013), “Hierarchical control of

equipment in automated container terminals”, In R Jensen & S Voss (Eds.),

Proceedings of the 16th international ieee conference on intelligent transportation

systems, s.l.: Springer, pp. 1-17.

[239] Xin, J., Negenborn, R.R. and Lodewijks, G. (2013), “Hybrid model predictive control

for equipment in an automated container terminal”, In S Mammar, F Chu & N Wu

(Eds.), Proceedings of the 2013 ieee international conference on networking, sensing

and control, s.l.: ieee, pp. 1-17.

[240] Xin, J., Negenborn, R.R. and Lodewijks, G. (2013), “Hybrid mpc for balancing

throughput and energy consumption in an automated container terminal”, In B. van

Arem & H. van Lint (Eds.), Proceedings of the 16th international ieee annual

conference on intelligent transporation systems, s.l.: ieee, pp. 1-17.

[241] Zamiralova, M., Keulen, F. van and Lodewijks, G. (2013), “A new analytical

approach to calculate the idler roll load distribution of a pipe conveyor”, In M Jones

(Ed.), Proceedings of the 11th International Conference on Bulk Materials Storage,

Handling and Transportation, Newcastle, NSW, Australia: The University of

Newcastle, pp. 1-12.

[242] Zamiralova, M., Jansen, K.M.B. and Lodewijks, G. (2013), “Indentation rolling

resistance of pipe belt conveyors using three-dimensional generalized Maxwell

viscoelastic model”, In s.n. (Ed.), Proceedings of the 11th international congress on

bulk materials storage, Handling and Transportation, Newcastle, NSW, Australia: The

University of Newcastle, pp. 1-11.

[243] Zheng, H., Negenborn, R.R. and Lodewijks, G. (2013), “Survey of approaches for

improving the intelligence of marine surface vehicles”, In B van Arem & H van Lint

(Eds.), Proceedings of the 16th international ieee annual conference on intelligent

transportation systems (itsc2013) (pp. 1217-1223). s.n.: ieee.

2014

42 / 44

[244] Feng, F., Pang, Y. and Lodewijks, G. (2014), “An intelligent agent-based information

integrated platform for hinterland container transport”, In X Liu & Q Kong (Eds.),

Proceedings 2014 IEEE International Conference on Service Operations and Logistics,

and Informatics. Piscataway, NJ, USA: IEEE, pp. 84-89.

[245] Feng, F., Pang, Y. and Lodewijks, G. (2014), “An intelligent agent-based information

integrated platform for hinterland container transport”, In X Liu & Q Kong (Eds.),

Proceedings 2014 IEEE International Conference on Service Operations and Logistics,

and Informatics. Piscataway, NJ, USA: IEEE, pp. 84-89.

[246] Li, S., Negenborn, R.R. and Lodewijks, G. (2014), “A distributed constraint

optimization approach for vessel rotation planning”, In RG Gonz·lez-RamÌrez, F

Schulte, S Voss & JA Ceroni Diaz (Eds.), Computational Logistics - Proceedings 5th

International Conference Computational Logistics Vol. 8760. Lecture Notes in

Computer Science Heidelberg-Berlin, Germany: Springer International Publishing, pp.

61-80.

[247] Liu, X., Lodewijks, G., and Pang, Y. (2014), “Intelligent maintenance of large scale

belt conveyor idler rolls: state of the art and opportunities”, Proceedings of the 1st

symposium on automated systems and technology, Leipzig Hannover University,

Hannover, Germany, pp. 1-10.

[248] Liu, X., Pang, Y., and Lodewijks, G. (2014), “A new analytical method of load

calculation for trough idler rolls stress discontinuity model for conveyor idler rolls

load calculation”, Bulk 14, North Lincolnshire, UK, pp. 1-9.

[249] Lodewijks, G. (2014), “Applied belt splice design”, Proceedings of SafeCon 1,

Johannesburg, South Africa, pp. 1-8.

[250] Lodewijks, G. (2014), “Safety integrity level requirements in the design of belt

conveyors”, Proceedings of SafeCon 1, Johannesburg, South Africa, pp. 1-8.

[251] Lommen, S.W., Schott, D.L. and Lodewijks, G. (2014), “DEM speedup: Stiffness

effects on behavior of bulk material”, Particuology: science and technology of

particles 12 (1), pp. 107-112.

[252] Nieuwkoop, F., Corman, F., Negenborn, R.R., Duinkerken, M.B., Schuylenburg, M.

van and Lodewijks, G. (2014), “Decision support for vehicle configuration

determination in Inter Terminal Transport system design”, In N-B Chang & et al.

(Eds.), Proceedings 2014 IEEE 11th International Conference on Networking, Sensing

and Control, Piscataway, NJ, USA: IEEE, pp. 613-618.

[253] Pang, Y. and Lodewijks, G. (2014), “Design of electronic commerce infrastructure for

cross-border postal operations”, In X. Liu & Q. Kong (Eds.), Proceedings 2014 IEEE

International Conference on Service Operations and Logistics, and Informatics SOLI,

Piscataway, NJ, USA: IEEE, pp. 406-411.

[254] Rogova, E. and Lodewijks, G. (2014), “Braking system redundancy requirements for

moving walks”, Reliability Engineering & System Safety 133, pp. 203-211.

[255] Sun, B.C., Zhang, Y., Li, W.F., Jiang, X.L., and Lodewijks, G. (2014), “Systems

structure and simulation design of emergency response to maritime accidents”,

Proceedings of the Maritech 2014 conference, Pao Alto, USA, pp. 25-29.

[256] Vianen, T.A. van, Ottjes, J.A. and Lodewijks, G. (2014), “Simulation-based

determination of the required stockyard size for dry bulk terminals”, Simulation

Modeling Practice and Theory 42, pp. 119-128.

[257] Vianen, T.A. van, Ottjes, J.A. & Lodewijks, G. (2014), “Simulation-based

rescheduling of the stacker/reclaimer operation”, Journal of Computational Science

99, pp. 1-6.

43 / 44

[258] Xin, J., Negenborn, R.R. and Lodewijks, G. (2014), “Energy-aware control for

automated container terminals using integrated flow shop scheduling and optimal

control”, Transportation Research. Part C: Emerging Technologies 44, pp. 214-230.

[259] Zamiralova, M.E., Lodewijks, G. (2014), “Pipe conveyor test rigs: Design,

application and test results - Part A”, Bulk Solids Handling 34 (5), pp. 40-45.

[260] Zamiralova, M.E., Lodewijks, G. (2014), “Pipe conveyor test rigs: Design,

application and test results - Part B”, Bulk Solids Handling 34 (6), pp. 38-46.

2015

[261] Derakhshani, S.M., Schott, D.L., Lodewijks, G. (2015), “Micro-macro properties of

quartz sand: Experimental investigation and DEM simulation”, Powder Technology

269, pp. 127-138.

[262] Liu, X., Pang, Y., Lodewijks, G. (2015), “A stress discontinuity approach to model the

stress profile on a loaded conveyor belt”, Powder Technology 273, pp. 102-110.

[263] Pang, Y., Lodewijks, G. (2015), “Causal modeling in industrial Reliability and

Maintenance Management”, Safety and Reliability: Methodology and Applications -

Proceedings of the European Safety and Reliability Conference, ESREL 2014, pp.

819-824.

[264] Rogova, E., Lodewijks, G., Pang, Y.(2015), “Application of standards in reliability

prognosis of braking system of moving walks”, Safety and Reliability: Methodology

and Applications - Proceedings of the European Safety and Reliability Conference,

ESREL 2014, pp. 1289-1297.

[265] Schott, D.L., Lommen, S.W., van Gils, R., de Lange, J., Kerklaan, M.M., Dessing,

O.M., Vreugdenhil, W., and Lodewijks, G. (2015), “Scaling of particles and

equipment by experiments of an excavation motion”, Powder Technology 278, pp. 26-

34.

[266] Schott, D.L., Lommen, S.W., Gils, R. van, Lange, J. de, Kerklaan, M.M., Dessing,

O.M., Vreugdenhil, W. and Lodewijks, G. (2015), “Scaling of particles and equipment

by experiments of an excavation method”, Powder Technology 278, pp. 26-34.

[267] Vianen, T. van, Ottjes, J.A. and Lodewijks, G. (2015), “Belt conveyor network design

using simulation”, Journal of Simulation 15, pp. 1-9.

[268] Wang, S., Cheng, G., Pang, Y., Lodewijks, G.(2015), “Integrated stiffness analysis of

redundant parallel manipulator based on finite element method”, Journal of

Information and Computational Science 12, pp. 351-365.

[269] Xin, J., Negenborn, R.R., Lodewijks, G. (2015), “Event-driven receding horizon

control for energy-efficient container handling”, Control Engineering Practice 39, pp.

45-55.

[270] Lodewijks, G. (2015), “Quantification of Safety in the Design of Belt Conveyors”,


International Conference on Mining Science and Technology,

April 26-29, 2015, Xuzhou, China.

[271] Pang, Y., Lodewijks, G. and Cheng, G. (2015), “Achieving Green Mining via Energy

Savings on Belt Conveyor Applications”, Proceedings of the 7th

International

Conference on Mining Science and Technology, April 26-29, 2015, Xuzhou, China.

[272] Zhong, Y, Li, W., Guo, W., Gong, L, and Lodewijks, G. (2015), “A Method of

Modeling and Service Encapsulation on Cloud Logistics Resources”, Proceedings of

the 2015 IEEE 19th

International Conference on Computer Supported Cooperative

Work in Design (CSCWD), May, 6-8, 2015, Calibri, Italy.

[273] Duinkerken, M.B., and Lodewijks, G. (2015), “Routing of AGV’s on Automated

Container Terminals”, Proceedings of the 2015 IEEE 19th

International Conference on

44 / 44

Computer Supported Cooperative Work in Design (CSCWD), May, 6-8, 2015,

Calibri, Italy.

[274] Feng, F., Pang, Y., Lodewijks, G., and Li, W. (2015), “Agent-based Negotiation and

Decision-making for Efficient Hinterland Transport Plan”, Proceedings of the 2015

IEEE 19th

International Conference on Computer Supported Cooperative Work in

Design (CSCWD), May, 6-8, 2015, Calibri, Italy (paper won best paper award).

[275] Li, S., Zheng, H., Negenborn, R.R. (2015), “Coordination for Efficient Transport over

Water”, Proceedings of the 2015 IEEE 19th

International Conference on Computer

Supported Cooperative Work in Design (CSCWD), May, 6-8, 2015, Calibri, Italy.

bibliography of gabriel lodewijks

Documents