BIBLIOGRAFIE

1. Ionescu, C., Vlădeanu, V., Larionescu, S., Ionescu, D. Automatizări. Editura Didactică şi Pedagogică, Bucureşti, 1982.

2. Saal, C., Ţopa, I., Fransua, Al., Micu, E. Acţionări electrice şi automatizări. Editura Didactică şi Pedagogică, Bucureşti, 1980.

3. Popovici, D. Servomecanisme. Litografia Univ. Tehnice Timişoara, 1992.

4. Kuo, B.C., Kelemen, A., Crivii, M., Trifa, V. Sisteme de comandă şi reglare incrementală a poziţiei. Editura Tehnică, Bucureşti, 1981.

5. Leonhard, W. Control of electrical drives. Heidelberg, Springer Verlay, 1985.

6. Preitl, Şt., Teoria sistemelor şi reglaj automat. vol.1, Lito. UTT, Timişoara, 1992.

7. Dragomir, T.L. Regulatoare automate. Vol.1, Lito. IPTVT, Timişoara, 1987.

8. Saito, K., Kamiyama, K., Ohmae, T., Matsuda, T. A microprocessor–controlled speed regulator with instantaneous speed estimation for motor drives. vol.35, no.1, pp.95-99, Feb.1988.

9. Brown, R.H., Schneider, S.C., Mulligan, M.G. Analysis of algorithms for velocity estimation from discrete position versus time date. IEEE Trans. Industrial Electronics, vol. 39, no.1, pp.11-19, Feb.1992.

10. Schmidt, P.B., Lorenz, R.D. Design principles and implementation of acceleration feedback to improve performance of DC drives. IEEE Trans. Industry Applications, vol. 28, no.3, pp.594-599, May/June 1992.

11. Wallace, I.T., Novotny, D.W, Lorentz, R.D., Divan, D.M. Verification of enhaced dynamic torque per ampere capability in saturated induction machines. IEEE Trans. Ind. Applications, vol. 30, no.5, pp.1193-1201, Sept./Oct., 1994.

12. Andreescu, G.D. Estimatoare în sisteme de conducere a acţionărilor electrice. Editura „Orizonturi Universitare”, Timişoara, 1999.

13. Vanlandingham, H.F. Introduction to Digital Control Systems. Macmillan Publishing Comp., New York, 1985.

14. Mihoc, D., Ceapăru, M., Iliescu, Şt., Borangiu, I. Teoria şi elementele sistemelor de reglare automată. Editura Didactică şi Pedagogică, Bucureşti, 1980.

15. Ionescu, C., Vlădeanu, V., Larionescu, S., Ionescu, D. Automatizări. Editura Didactică şi Pedagogică, Bucureşti, 1982.

16. Utkin, V.I. Variable Structure Systems with Sliding Modes. IEEE Transactions on Automatic Control, vol. 22, no. 2, pp. 212-222, April, 1977.

Bibliografie

17. Walcott, B.L., Zak, S.H. Observation and Control of Nonlinear Dynamical Systems: A Variable Structure Approach. Raport de cercetare TR-EE 86-41, Purdue University, West Lafayette, IN, 1996.

18. Preitl, Şt., Precup, R.E. Sisteme de reglare avansată. Vol.1.Lit.Univ. „Politehnica” din Timişoara, Timişoara, 1995.

19. Utkin, V.I. Sliding Modes and Their Applications in Variable Structure Systems. Mir, Moscow, 1978.

20. Itkis, U. Control Systems of Variable Structure. Wiley, New York, 1976.

21. Hung, J.Y., Gao, W., Hung, J.C. Variable Structure Control: A Survey. IEEE Transactions on Industrial Electronics, vol. 40, no. 1, pp. 2-22, February, 1993.

22. Buehler, H. Reglage par mode de glissement. Presses Polytechniques Romandes, Lausanne, 1986.

23. Milosowlieivić, Č., Antić, D., Djordjevic, G. DC Motor Speed Regulation Using PI Type Variable Structure Regulator with Identity Observer. Conferinţa Internaţională Automation ‘92, vol. 1, pp. 214-223, Budapesta, 1992.

24. Dumitrache, I. Tehnica reglării automate. Editura Didactică şi Pedagogică, Bucureşti, 1980.

25. Preitl, Şt., Precup, R., Porumb, A. Elemente de reglare automată. Curs, vol.1, Lit. U.T.T., Timişoara, 1995.

26. Seracin, E., Popovici, D. Tehnica acţionărilor electrice. Editura Tehnică, Bucureşti, 1985.

27. Dragomir, T.L., Preitl, Şt. Teoria sistemelor şi reglării automate. Litografia I.P.T., Timişoara, 1978.

28. Blakeslea, T. Proiectarea cu circuite logice MSI şi LSI standard. Editura Tehnică, Bucureşti, 1988.

29. Ionescu, V. Teoria sistemelor. Sisteme liniare. Editura Didactică şi Pedagogică, Bucureşti, 1985.

30. Schönfeld, R., Habiger, E. Automatisierte Elektroantriebe. VEB Verlag Technik, Berlin, 1981.

31. Voicu, M. Tehnici de analiză a stabilităţii sistemelor automate. Editura Tehnică, Bucureşti, 1986.

32. Fransua, Al., Măgureanu, R. Electrical machines and drive systems. Editura Tehnică, Bucureşti, 1984.

33. Măgureanu, R. Maşini electrice speciale pentru sisteme automate. Editura Tehnică, Bucureşti, 1980.

34. Cheamond, C.J. Control System Technology. Edward Arnold, London, 1986.

35. Atanasiu, Gh. Maşini electrice speciale. Lit. UTT, Timişoara, 1992.

36. Ifrim, A., Noţingher, P. Materiale electrotehnice. Editura Didactică şi Pedagogică, R.A., Bucureşti, 1992.

37. Chioreanu, V. Materiale electrotehnice. Lit. I.P.T.V.T., Timişoara, 1983.

527

Bibliografie

38. Gheorghiu, I.S., Fransua, A. Tratat de maşini electrice. Vol. I. Maşini de curent continuu. Editura Academiei R.S.R., Bucureşti, 1968.

39. Richter, R. Maşini electrice. Vol. I. Elemente generale de calcul. Maşini de c.c. Editura Tehnică, Bucureşti, 1958.

40. Dordea, T., Biriescu, M. Proiectarea maşinilor electrice. Volumul 1-1, Lit. I.P.T.V.T., Timişoara, 1990.

41. Liwschitz, M. Die elektrischen Maschinen. Leipzig und Berlin, Verlay Teubner.III. Berechnung und Bemessung, 1934.

42. Dorf, R.C. Electrical Engineering Handbook. IEEE Press, 1993.

43. Takada, Y., Abe, M., Masuda, S., Inagaki, J. Commercial scale production of Fe-6,5 wt. % Si sheet and its magnetic properties. 4 th Joint 3M- Inter- mag Conference AC-08, 1988, pp.5367-5369.

44. Takada, Y., Abe, M., Fujita, F. Development of Fe- 6,5 wt. % Si sheet in commercial production. Materials Research Society, vol.11, 1989, pp.199-207.

45. Motoyasu Mochizuki, Sadayoshi Hibino, Fuminori Ishibashi. Application of 6,5 % Silicon Steel Sheet to Induction Motor and Its Magnetic Properties. International Conference on Electrical Machines. Cambridge, Massachusetts, U.S.A., 13-15 August, 1990.

46. *** - Internet, NK Super Core Series [Comparison].

47. Măgureanu, R., Vasile, N. Servomotoare fără perii tip sincron. Editura Tehnică, Bucureşti, 1990.

48. *** - Internet, Master Magnetics Inc.

49. *** - Internet, Dexter Magnetic Technologies Inc.

50. Bartzer, Şt., Muşuroi, S. Tehnologia de fabricaţie a produselor electrotehnice. Îndrumător de lucrări, Lit. U.P.T., Timişoara, 1997.

51. Fransua, A., Măgureanu, R. Tendinţe actuale în domeniul construcţiei şi comenzii maşinilor şi acţionărilor electrice. Ciclul Maşini şi Acţionări electrice. Tendinţe actuale, vol. I, Editura Tehnică, Bucureşti, 1988.

52. Kelemen, A., Imecs, M. Sisteme de reglare cu orientare după câmp ale maşinilor de curent alternativ. Editura Academiei R.S.R., Bucureşti, 1989.

53. Câmpeanu, A. Introducere în dinamica maşinilor electrice de curent alternativ. Editura Academiei Române, Bucureşti, 1998.

54. Gheorghiu, I.S., Fransua, Al. Tratat de maşini electrice. Vol.III. Maşini asincrone. Editura Academiei R.S.R., Bucureşti, 1971.

55. Atanasiu, Gh. Transformări de variabile în teoria maşinilor electrice. Curs Conferinţa Naţională a Electrotehnicienilor şi Energeticienilor, 1982.

56. Atanasiu, Gh. Maşini electrice. Elemente de execuţie I (Teorie, performanţe). Vol. I, Litogafia UTT, Timişoara, 1994.

528

Bibliografie

57. Blaschke, F. Das Prinzip der Feldorientierung, die Grundlage für die Transvektor-Regelung von Drehfeldmaschinen, Siemens-Zeitschrift, 45, Heft 10, 1971.

58. Fransua, A., Măgureanu, R. Electrical machines and drive systems, Technical Press, Oxford, 1984.

59. Kelemen, A. Acţionări electrice. Editura Didactică şi Pedagogică, Bucureşti, 1979.

60. Kovacs, K.P. Analiza regimurilor tranzitorii ale maşinilor electrice. Traducere şi completare de Kelemen A. şi Imecs M. Editura Tehnică, Bucureşti, 1980.

61. Leonhard, W. Control of AC - machines with help of microelectronics. 3 rd

IFAC Symposium on Control in Power Electronics and Electrical Drives, Survey papers, Lausanne, 1983.

62. Bălă, C. Maşini electrice. Editura Didactică şi Pedagogică, Bucureşti, 1982.

63. Boldea, I., Atanasiu, Gh. Analiza unitară a maşinilor electrice. Editura Academiei, Bucureşti, 1983.

64. Dordea, T. Maşini electrice. Editura Didactică şi Pedagogică, Bucureşti, 1977.

65. Câmpeanu, A. Maşini electrice. Editura Scrisul Românesc, Craiova, 1988.

66. Boldea, I. Transformatoare şi maşini electrice. Editura Politehnica, Timişoara, 2001.

67. Park, R.H. Two reaction theory of synchronous machines. Part I: Generalized method of analysis. AIEE Transaction, vol. 48, 1929, pp. 716-727.

68. Kovács, K.P., Rácz, I. Transiente Vorgänge in Wechselstrommaschinen. Verlag der Ungarischen Akademie der Wissenschaften, Budapest, 1959.

69. Rácz, I. Aszinkron motorok elektromágneses tranziens jelens égeinek szamitási módszere Electrotechnika, 45, Budapest, 1972.

70. Stepina, J. Raumzeiger als Grundlage der Theorie der elektrischen Maschinen. ETZ-A, 88, 23, 1967.

71. Bayer, K.H., Waldmann, H., Weibelzahl, H. Die Transvektor-Regelung für den feldorientierten Betrieb einer Synchronmaschine. Siemens-Zeitschrift, 45, Heft 10, 1971.

72. Flöter, W., Ripperger, H. Die. Transvektor-Regelung für den feld-orientierten Betrieb einer Asynchronmaschine. Siemens-Zeitschrift, 45, Heft 10, 1971.

73. Langweiler, F., Richter, M. Flusserfassung in Asynchronmaschinen. Siemens-Zeitschrift, 45, Heft 10, 1971.

74. Clarke, E. Circuit analysis of A.C. power systems. John Wiley, New York, 1943.

75. Lyon, W.V. Transient analysis of alternating–current machinery. John Wiley, New York, 1954.

76. Kron, G. Tensors for circuits. Dover Publications, New York, 1959.

529

Bibliografie

77. Ku, Y.H. Transient analysis of rotating machines and stationary networks by means of rotating reference frames. Vol. 70/1951.

78. Yamamura, S. AC motors for high performance applications. Marcel Dekker, New York, 1986.

79. Biriescu, M. Maşini electrice rotative. Parametri, caracteristici, încercări. Editura de Vest, Timişoara, 1997.

80. Muşuroi, S., Bogoevici, M. Determinarea pierderilor din fierul rotoric al maşinilor trifazate cu rotorul în colivie în situaţia alimentării acestora prin convertoare statice de frecvenţă. Lucrările ştiinţifice ale simpozionului internaţional Universitatea ROPET 2000, 19 – 20 oct. 2000, Petroşani, pp. 41-44, Petroşani, 2000.

81. Muşuroi, S., Bogoevici, Gh. Determinarea parametrilor echivalenţi ai circuitului magnetic al maşinilor de inducţie trifazate cu rotorul în scurtcircuit alimentate prin invertoare de tensiune. Sielmen –2001, vol. I, pp. 21-22, Chişinău, Moldova.

82. Muşuroi, S., Olărescu, V. The Mathematical Model for Three- Phase Cage Induction Motors Supplied by Static Frequency Converters. International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2001, Kusadasi, Turkey.

83. Muşuroi, S., Olărescu, V. The Equivalent Factors Determination of Rotor Parameters Modification in Case of Cage Induction Motors Supplied by Static Frequency Converters. Applied Research Review on Technology and Automation, Pireu, 2000, Greece.

84. Muşuroi, S., Bogoevici, Gh. The Determination of the Equivalent Modification Factors of the Rotoric Parameters while the Cage Induction Motors are Being Supplied by Invertors. 15th International Conference on Electrical Machines, ICEM 2001, Bruges, Belgium.

85. Schönfeld, R., Habiger, E. Automatisierte Elektroantriebe. VEB Verlag Technik, Berlin, 1981.

86. Atanasiu, Gh., Soran, I.F., Muntean, N., Şorândaru, C., Popovici, D., Andreescu, Gh.D. Servomotoare sincrone pentru acţionări electrice. Editura Mirton, Timişoara, 2003.

87. Bose Bimal, K. Power Electronics and Variable Frequency Drives. Technology and Applications, IEEE Press, New York, 1996.

88. Boldea, I., Nasar, S.A. Electric Drives, CRC Press, 1998.

89. Miller, T.J. Brushless Permanent – Magnet and Reluctance Motor Drives, Claredon Press-Oxford, 1989.

90. Boldea, I. Parametrii maşinilor electrice. Editura Academiei Române, Bucureşti, 1991.

91. Lipo, T.A. A cartesian vector approach to reference frame theory of AC machines. Research Report WEMPEC, Madison, Wiscousin, USA, 1984.

530

Bibliografie

92. Bausch, H., Friedrich, J., Kolletsche, H.D. Symmetrical component representation of variable speed ac modular permanent magnet machines. International Conference on Electrical Machines, Pisa, Sept. ‘88.

93. Gieras, J., Wing, M. Permanent Magnet Motor Technology. Design and Applications. Second Edition, Marcel Dekker, Inc., New-York, 2002.

94. Bowers, B. Philips Techn. Review 35(4): 77-95, 1975.

95. Cremer, R. Current status of rare-earth permanent magnets. Int. Conf. on Maglev and Linear Drives, Hamburg, Germany, pp.391-398, 1988.

96. Lajoie-Mazenc, M., ş.a. An electrical machine with electronic comutation using high energy ferrite. In: Proceedings of the Conference on Small Electrical Machines, London, pp.31-34, 1976.

97. Binns, K.J., Molineaux, D.C., Bornard, W.R. Some aspects of the development and design of a high performance permanent magnet synchronous motor. Proceeding of the Conference on Small Electrical Machines, London, pp. 76-77, 1976.

98. Cornell, D.P. Permanent magnet a.c. motors. In: Proceedings Conference Drives Motors/Controls – 83, Harrigate, U.K., pp.102-107, 12-14 October, 1983.

99. Binns, K.J., Chabaan, F., Lisboa, P.J.G., Mellor, P.H. The role of neodymum-iron-boron in relation to other materials for permanent magnet machines. Conference on Electrical Machines and Drives, London, Sept. ‘88.

100. *** - Servomotoare, I.C.P.E. Bucureşti.

101. *** - Prospecte Siemens.

102. Vasiliev, D.V., Mitrofanov, B.A. Calculul şi proiectarea sistemelor de urmărire. Editura Tehnică, Bucureşti, 1966.

103. Măgureanu, R., Vasile, N. Motoare sincrone cu magneţi permanenţi şi reluctanţă variabilă, Editura Tehnică, Bucureşti, 1982.

104. Murphy, J., Turnbull, F. Power Electronic Control of AC Motors. Pergamon Press, British Library, London, 1988.

105. Rajashekara, K., Kawamura, A., Matsuse, K. Sensorless Control of AC Motor Drives, New York, IEEE Press, 1996.

106. Cruickshank, J.O., Menzies, R.W. Axially Laminated Anisotropic Rotors for Reluctance Motors. Proc. IEEE, vol.113, 1966.

107. Vagati, A., Pastorelli, M., Franceschini, G. Design of low-torque-ripple synchronous reluctance motors. IEEE IAS Annu. Meet,. pp. 286-293, Oct.1997.

108. Zuncheng, Z., Spooner, E. High-speed reluctance machines with mixed-pole windings. Proc. Inst. Elect. Eng., vol.138, pt. B, pp. 257-263, Sept.1991.

109. Fratta, A., Troglia, G.P., Vagati, A., Villata, F. Evaluation of torque-ripple in high performance synchronous reluctance machines. IEEE IAS Annu. Meet., pp. 163-170, 1993.

110. Krishnan, R. Switched reluctance motor drives. CRC Press, New York.

531

Bibliografie

111. Kuen-Der Wu, Hurng-Liahng Jou. A New Peak Detection Method for the Three-Phase Sinusoidal Signals. IEEE Transaction on Industrial Electronics, vol. 45, no. 4, August 1998.

112. Mohan, N., Underland, T., Robbins, W. Power Electronics. John Wiley@ Sons, Inc., New York, 1995.

113. Popovici, D. Bazele convertoarelor statice. Editura Politehnica, Timişoara, 1999.

114. Dehmlow, M., Hermann, K., Sommer, R. Resonant inverter systems for drive applications. EPE Journal, nr. 4/1992.

115. Bose, B. Power Electronics and Variable Frecvency Drives. IEEE Press, New York, 1997.

116. Kordik, K.S. The Step Motor – what it is and does. Proceedings, Third Ann. Symp. on Incr. Mot. Contr. Syst. and Dev., Univ. of Illinois, SUA, 1977.

117. Kisch, D.O. Sisteme de reglare automată a maşinilor de curent alternativ. Editura ICPE, Bucureşti, 1998.

118. Gabriel, R., Leonhard, W. Microprocessor control of induction motor. International Semiconductor Power Converter Conference, 1982.

119. Garces, L.J. Ein Verfahren zur Paramteranpassung bei der Drehzahlregelung der umrichtergespeisten Käfigläufermaschine. Diss. TH Darmstadt, 1978.

120. Kisch, D.O. Reglarea vectorială a maşinilor de curent alternativ. Editura ICPE, Bucureşti, 1997.

121. Takahashi, I., Noguchi, T. A new quick response and high-efficiency control strategy of an induction motor. IEEE Trans. Industry Applications, vol. 22, no.5, Sept./Oct., 1986.

122. Boldea, I., Nasar, S. Vector Control of AC Drives. CRC Press, Inc. 2000, Florida, 1992.

123. Buja, G., Kazmierkowski, M. Direct Torque Control of PWM Inverter–Fed AC Motors–A Survey. IEEE Trans. Industrial Electronics, vol. 51, no. 4, August, 2004.

124. Xue, Y., Xu, X., Habetler, T.G., Divan, D.H. A stator flux-oriented voltage source variable-speed drive based on dc link measurement. IEEE Trans. Industry Applications, vol. 27, no. 5, Sept./Oct., 1991.

125. Muntean, N. Convertoare statice. Editura Politehnica, Timişoara, 1998.

126. Kazmierkowski, M.P., Sulkowski, W. A nowell control scheme for transistor PWM inverter-fed induction motor drive. IEEE Trans. Industrial Electronics, vol. 38, no.1, Feb., 1991.

127. Casadei, D., Serra, G., Tani, A. Implementation of a Direct Torque Control Algorithm for Induction Motors Based on Discrete Space Vector Modulation. IEEE Trans. on Power Electronics, vol. 15, no. 4, July, 2000.

532

Bibliografie

128. Casadei, D., Serra, G., Tani, A. Improvement of Direct Torque Control Performance by Using a Discrete SVM Technique. The 29 th IEEE PESC 98, vol. 2, 1998.

129. Boldea, I., Nasar, S.A. Torque Vector Control–A Class of Fast and Robust Torque, Speed and Position Digital Controllers for Electric Drives. Proceedings of EMPS, vol. 15, 1988.

130. Holtz, J. Speed estimation and sensorless control of AC machine. Conf. Rec. IEEE IECON, 1993.

131. Ishida, M., Iwata, K. A new slip frequency detector of an induction motor utilizing motor slot harmonics. IEEE Trans. Ind. Applicat, vol. IA-20, May/Juno, 1984.

132. Hurst, K.D., Habetler, T.G. Sensorless speed measurement using current harmonics spectral estimation in induction machine drives. IEEE Trans. Power Electronics, vol. 11, Jan.1996.

133. Blaschke, F., Van der Burgt, T., Vandenput, A. Sensorless direct field orientation at zero flux frequency. Conf. Rec. IEEE-IAS Annu. Meeting, 1996.

134. Yong, S.I., Choi, J.W., Sul, S.K. Sensorless vector control of induction machine using high frequency current injection. Conf. Rec. IEEE-IAS Annu. Meeting, 1994.

135. Ha, J.I., Sul, S.K. Sensorless field-orientation control of an induction machine by high-frequency signal injection. IEEE Trans of Industry Applications, vol. 35, no.1, January/February, 1999.

136. Joetten, R., Maeder, J. Control methods for good dynamic performance induction motor drives based on current and voltage as measure quantities. IEEE Trans. on Industry Applications, vol. IA – 19, May/June, 1983.

137. Kim, Y.R., Sul, S.K., Park, M.H. Speed Sensorless Vector Control of Induction Motor Using Extended Kalman Filter. IEEE Trans. on Industry Applications, vol. 30, no. 5, Sept./Oct., 1994.

138. Dumitrescu, A., Ştefan, I. Comanda numerică a acţionărilor electrice de tip sensorless. Editura ICPE, Bucureşti, 2000.

139. Chen, F., Dunnigan, M.W. Comparative Study of a Sliding-Mode Observer and Kalman Filters for Full State Estimation in an Induction Machine. IEE Proceedings on Electric Power Applications, vol. 149, no. 1, January, 2002.

140. Schroedl, H. Sensorless Control of AC Machines at Low Speed and Standstill Based on the Inform Method. IAS Meeting, 1996.

141. Fukuda, T., Shibata, T. Theory and Applications for Neural Networks for Industrial Control Systems. IEEE, Transaction on Ind. Electronics, vol. 39, no. 6, 1992.

142. Simoes, M.G., Bore, K.B. Neural Networks Based Estimation of Feedback Signals for a Vector Controlled Induction Motor Drive. IEEE Transaction on Industry Application, vol. 31, no. 3, May/June, 1993.

533

Bibliografie

143. Ben-Brahim, L., Kurosawa, R. Identification of Induction Motor Speed Using Neural Networks. IEEE PCC-Yokohama, 1993.

144. Schroedl, M. Digital Implementation of a Sensorless Control Algorithm for Permanent Magnet Synchronous Motors. Proc. Int. Conference on Evolution and Modern Aspects of Synchronous Machines, SM 100’91, Zurich, 1991.

145. Levi, E., Sokola, M., Mironovic, V., Rauski, D. A study of permanent magnet synchronous machine with current control in stationary and field – oriented reference frame. Proc. Int. Conference on Evolution and Modern Aspects of Synchronous Machines, SM 100’ 91, Zurich, 1991.

146. Robyns, B., Buyse, H., Labrique, F., Sente, P. PM synchronous actuator digital control based on field orientation and decoupling state feedback. Proc. Int. Conf. on Electric Machines ICEM’92, 1992.

147. Krafka, P., Kunze, P., Henrichfreise, H. DSP controller for synchronous drives. PCIM Europe, Jan./Feb., 1994.

148. Nash, J.N. Direct torque control, induction motor vector control without an encoder. IEEE Trans. Ind. Appl., vol. 33, no. 2, March/April, 1997.

149. Matsui, N. Sensorless PM brushless DC motor drives. IEEE Trans. Industrial Electronics, vol. 43, no. 2, April, 1996.

150. Sepe, R.B., Lang, J.H. Real-time adaptive control of permanent-magnet synchronous motor. IEEE Trans. Ind. Applications, vol. 27, no. 4, 1991.

151. Ertugrul, N., Acarnley, P.P. A new algorithm for sensorless operation of permanent magnet motors. IEEE Trans. Industry Applications, vol. 30, no. 1, Jan/Feb., 1994.

152. Schroedl, H. Control of permanent magnet synchronous machines using a new position-estimator. Proc. Int. Conference on Electric Machine ICEM’ 90, Boston, August, 1990.

153. Nozari, F., Mezs, R.P.A., Julian, A.I., Sun, C., Lipo, T.A. Sensorless synchronous motor drive for use on commercial transport airplanes. IEEE Trans. Industry Applications, vol. 31, no. 4, July/August, 1995.

154. Andreescu, G.D. Nonlinear observer for position and speed sensorless control of permanent magnet synchronous motor drives. Proc. 6th International Conference on Optimization of Electric and Electronic Equipments OPTIM ’98, Braşov, May, 1998.

155. Ryvkin, S. Sliding mode based observer for sensorless permanent magnet synchronous motor drive. Proc. 7th Int. Power Electronic @ Motion Control Conf. PEMC’ 96, Budapest, September, 1996.

156. Tomita, M., Senjyu, T., Doki, S., Okuma, S. New sensorless control for brushless DC motors using disturbance observer and adaptive velocity estimators. IEEE Trans. Ind. Electronics, vol. 45, no. 2, April, 1998.

157. Stone, A.C., Buckley, M.G. Ultra high performance brushless dc drive. Proc. Conference Drives/Motors/Controls, 1984.

534

Bibliografie

158. Schroedl, M., Weinmeier, P. Sensorless control of reluctance machines at arbitrary operating conditions including standstill. IEEE Trans. Power Electron., vol. 9, Mar. 1994.

159. Lagerquist, R., Boldea, I., Miller, T.J.E. Sensorless control of the synchronous reluctance motor. IEEE Trans. Ind. Applicat., vol. 30, May/June, 1994.

160. Arefeen, M.S., Ehsani, M., Lipo, T.A. An analysis of the accuracy of indirect shaft sensor for synchronous reluctance motor. IEEE Trans. Ind. Applicat., vol. 30, Sept./Oct., 1994.

161. Jovanovic, M., Betz, R.E., Platt, D. Position and speed estimation of sensorless synchronous reluctance motor. Proc. IEE PEDS ’95 Conf. Singapore, Feb. 1995.

162. Xiang, Q.Y., Nasar, S.A. Estimations of rotor position and speed of a synchronous reluctance motor for servodrives. Proc. Ind. Elect. Eng., vol. 142, no. 3, May, 1995.

163. Matsuo, T., Lipo, T.A. Rotor position detective scheme for synchronous reluctance motor based on current measurements. IEEE Trans. Ind. Applicat., vol. 31, July/Aug., 1995.

164. Boldea, I., Nasar, S.A. Torque vector control of axially-laminated anisotropic rotor reluctance synchronous motors. Elect. Mach. Power Syst., vol. 19, 1991.

165. Jovanovic, H.G., Betz, R.E., Platt, D. Sensorless vector controller for a synchronous reluctance motor. IEEE Trans. Ind. Applicat., vol. 34, Mar./Apr., 1998.

166. Ogasawara, S., Akagi, H. Implementation and position control performance of a position-sensorless IPM motor drive system based on magnetic saliency. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I, 1997.

167. Jansen, P.I., Lorenz, R.D. Transducerless position and velocity estimation in induction and salient AC machines. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I, 1994.

168. Corley, M.J., Lorenz, R.D. Rotor position and velocity estimation for a permanent magnet synchronous machine at stand still and high speeds. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I, 1996.

169. Consoli, A., Russo, F., Scarcella, G., Testa, A. Low and zero speed sensorless control of synchronous reluctance motors. IEEE Trans. Ind. Applicat., vol. 35, Sept./Oct., 1999.

170. Kang, S.I., Ha, J.I., Sul, S.K. Position controlled synchronous reluctance motor without rotational transducer. Conf. Rec. IEEE-IAS Annu. Meeting, vol. I, 1998.

171. Capecchi, E., Guglielmi, P., Pastorelli, M., Vagati, A. Position Sensorless Control of the Transverse-Laminated Synchronous Reluctance Motor. IEEE Trans. Ind. Applicat., vol. 37, Nov./Dec., 2001.

535

Bibliografie

172. Boldea, I., Muntean, N., ş.a. Distributed Anisotropy Rotor Synchronous Motors- Proving High Motor Performance and a New Motion Sensorless Controller. PCIM-92, vol. 21, Nürnberg, 1992.

173. Vanci, Gh. Contribuţii privind sistemele de acţionare electrică cu maşină cu reluctanţă variabilă. Teză de doctorat, Universitatea Politehnica Timişoara, Facultatea de Electrotehnică, Timişoara, 2002.

174. Brad, P., Vanci, Gh. Efficient Power Drives for the Switched Reluctance Motor. PEMC ’96, Budapest, September, 1996.

175. Bass, J.T. Simplified electronics for torque control of sensorless switched-reluctance motor. IEEE Trans. Ind. Electron., vol. 34, April, 1985.

176. Amar, B.L., Dessaint, L.A., Akhrif, O., Olivier, G. Adaptive feedback linearisation for position control of switched-reluctance motor: Analysis and simulation. Int. J. Adapt. Control Signal Process, vol. 7, no. 2, Mar./April, 1993.

177. Acarnley, P.P., Hill, R.J., Hooper, C.W. Detection of rotor position in stepping and switched-reluctance motors by monitoring of current waveforms. IEEE Trans. Ind. Electron., vol. 32, June, 1985.

178. Lyons, J.P., MacMinn, S.R., Preston, M.A. Flux/current method for SRM rotor position estimation. Conf. Rec. IEEE-IAS Annu. Meeting, 1991.

179. Ehsani, M., Husain, I., Kulkarni, A.B. Elimination of discrete position sensor and current sensor in switched reluctance motor drives. IEEE Trans. Ind. Applicat., vol. 28, Jan./Feb., 1992.

180. Kjaer, P.C., Blaabjerg, F., Pedersen, J.K., Nielsen, P., Andersen, L. A new indirect rotor position detection method for switched reluctance drives. Proc. ICEM ’94, vol. 2, Paris, 1994.

181. Gallegos-Lopez, G., Kjaer, P.C., Miller, T.J.E. A new sensorless method for switched reluctance motor drives. IEEE Trans. Ind. Applicat, vol. 34, July/Aug., 1998.

182. Acarnley, P.P., French, C.D., Al-Bahadly, I.H. Position estimation in switched reluctance drives. Proc. EPE ’95, vol. 3, 1995.

183. Ertugrul, N., Acarnley, P.P. A new algorithm for sensorless operation of permanent magnet motors. IEEE Trans. Ind. Applicat., vol. 30, Jan/Feb., 1994.

184. Atanasiu, Gh., ş.a. Soluţii tehnice noi privind sistemele de acţionare electrică cu motoare sincrone cu reluctanţă variabilă şi înfăşurări statorice concentrate. Contract de cercetare cu Ministerul Industriilor, Faza I, Martie, 1993.

185. Atanasiu, Gh., ş.a. Soluţii tehnice noi privind sistemele de acţionare electrică cu motoare sincrone cu reluctanţă variabilă şi înfăşurări statorice concentrate. Contract de cercetare cu Ministerul Industriilor, Faza II, Iunie, 1993.

186. Bolognani, S., Ognibeni, E., Zigliotto, M. Sliding Mode Control of the Energy Recovery Chopper in a C-Dump Switched Reluctance Motor Drive. IEEE Trans. on I.A., Jan./Feb., 1993.

536

Bibliografie

187. Bose, B.K., Miller, T.J.E., Szczeny, P.N. Microcomputer Control of SRM. IEEE Trans. on I,A., July/August, 1986.

188. Faiz, J. Prediction of Static Magnetisation Characteristics of Switched Reluctance Motors for General Rotor Position. EPE, Firenze, vol. I, 1991.

189. Harria, D., Lary, J. A simple motion estimator for VRM-IEEE IAS Conference, October, 1988.

190. Miller, T.J.E. Switched Reluctance Motor and their Control. Oxford University Press, 1993.

191. Olărescu, V., Muşuroi, S. Enhanced Simplified Control Algorithm for Surface-mounted Permanent Magnet Synchronous Motors with Sinusoidal Excitation. The 4th International Power Electronics and Motion Control Conference, Xi’an, China, August, 14-16, 2004.

192. Olărescu, V., Muşuroi, S. The Simplify Control Algorithm for Permanent Synchronous Motors with Sinusoidal Current Control. 16th International Conference on Electrical Machines, Cracow, Poland, 5-8 September, 2004.

193. Muşuroi, S., Greconici, M., Moţ, M. A Direct FOC of a Inverter Fed Induction Motor. 13th International Symposium on Power Electronics, Novi Sad, 2-4 November, 2005.

194. Ferreira, C., Richter, E. About channel independence for multichannel switching reluctance generating systems. Record of IEEE - IAS, Annual Meeting, 1996.

195. Philips, D.A. Switched reluctance drive, new aspects. IEE Trans., vol. PE - 5, no. 4, 1990.

196. Miller, T.J.E. Converter volt - ampere requirements of the switched reluctance motor drive. IEEE Trans., vol. IA - 21, no. 5, 1985.

197. Mecrow, B.C. New winding configurations of doubly salient reluctance machines. Record of IEEE - IAS, Annual Meeting, Part.I, 1992.

198. Kyaer, P.C., Gribble, J.J., Miller, T.J.E. High grade control of switched reluctance machines, Record of IEEE - IAS, Annual Meeting, vol. I, 1996.

199. Buss, J.T., Eshani, M., Miller, T.J.E. Robust torque control of SRM without a shaft - position sensor. IEEE Trans., vol. IA - 33, no.3, 1996.

200. Rajashekara, K., Kawamura, A., Matsuse, K. Sensorless control of a.c. drives. IEEE Press, 1996.

201. Blakeslee, T. Proiectarea cu circuite logice MSI şi LSI standard. Editura Tehnică, Bucureşti, 1988.

202. Schwartzenbach, I., Gill, K.F. System Modeling and Control, Edward Arnold, London, 1986.

203. Franklin, G., Powell, J.D., Workman, M. Digital Control of Dynamic Systems. Addison-Wesley, 1999.

537

Bibliografie

204. Popovici, D. Comanda numerică a acţionărilor electrice. Editura Politehnica, Timişoara, 2002.

538