bestboy s3all product names and brand safety jogger, are registered and may not be used or...

8
PRODUCT SHEET Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy EN ISO 20345:2011 S3 SRC Sizes 35-48 Weight (s. 41) 620 gr. Model description: Leather shoe, water repellent, black, Nylon mesh lining, antistatic, puncture resistant steel sole,shock proof, antislip, steel toe cap, S3 PU/PU sole. Application areas: Construction,Manufacturing. Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source. Description Measure Unit Result EN345 required Complete shoe Protection of toes: metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal plate resistant to 1100N Impact resistance (Clearance after shock) Compressive strength (after clearance compression) Mm Mm 15,5 18,5 >14 14 Anti-shock system: Low-Density polyurethane and profile of the heel Shock absorption in heel J >35 >20 Upper Leather, water repellent, black Permeability to water vaper Mg/m2 hour >2,0 >0,8 Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20 Water repellent Minute >90 <60 Front Thickness 1,2mm Permeability coefficient Mg/cm2 >35 >30 Lining Nylon mesh grey Permeability to water vapor Mg/cm2 hour >2,1 >2 Back Thickness 1,2mm Permeability coefficient Mg/cm2 >45 >30 Insole Antistatic, absorbent, resistant to abrasion and to exfoliation Abrasion resistance Cycles >400 >400 Outsole Antistatic double density polyurethane injected directly onto the upper Abrasion resistance (volume loss) Mm3 110 <150 Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids Oil resistance (volume variation AV) % +1,0 <+12 Coefficient of adhesion of the outsole - 0,18 >0,15 1

Upload: others

Post on 25-Oct-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

BESTBOY S3

Product Reference Bestboy EN ISO 20345:2011 S3 SRC Sizes 35-48 Weight (s. 41) 620 gr. Model description: Leather shoe, water repellent, black, Nylon mesh lining, antistatic, puncture resistant steel sole,shock proof, antislip, steel toe cap, S3 PU/PU sole.

Application areas: Construction,Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description Measure Unit

Result EN345

required

Complete shoe

Protection of toes: metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal plate resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15,5

18,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >35 >20

Upper Leather, water repellent, black Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >35 >30

Lining Nylon mesh grey Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,2mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

1

Page 2: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

BESTRUN S3

Product Reference Bestrun EN ISO 20345:2011 S3 SRC Sizes 36-47 Weight (s. 41) 590 gr. Model description: Leather shoe, water repellent, black, Nylon mesh lining, antistatic, puncture resistant steel sole,shock proof, antislip, steel toe cap, S3 PU/PU sole.

Application areas: Construction, Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description Measure Unit

Result EN345

required

Complete shoe

Protection of toes: Metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal Sole resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15,5

18,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >35 >20

Upper Black leather, water repellent, Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >35 >30

Lining Nylon mesh grey Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock Absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

2

Page 3: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

BESTSUN S1P

Product Reference Bestsun EN ISO20345:2011 S1P SRC Sizes 38-47 Weight (s. 41) 620 gr. Model description: Nubuck shoe, grey, Nylon mesh lining, antistatic, puncture resistant steel sole, shock proof, antislip, steel toe cap, S1P, PU/PU sole.

Application areas:Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description

Measure Unit

Result EN345

required

Complete shoe

Protection of toes: Metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal sole resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15,5

18,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >35 >20

Upper Nubuck leather,grey Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >20

Water repellent Minute <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >30

Lining Cambrella grey Permeability to water vapor Mg/cm2 hour >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

3

Page 4: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

BESTFIT S1P

Product Reference Bestfit Euronorm EN345 S1P SRC Sizes 36-47 Weight (s. 41) 640 gr. Model description: Leather shoe with elastic, black, Cambrella lining, antistatic, puncture resistant steel sole, shock proof, antislip, steel toe cap, S1P PU sole.

Application areas:

Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description Measure Unit

Result EN345

required

Complete shoe Protection of toes: composite tip resistant to: A shock of 200 J Pressure of 1500 kg

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15,5

18,5

>14

14

Anti-shock system: Low-Density polyurethane And profile of the heel

Shock absorption in heel J >35 >20

Upper Dry coated action leather, black Permeability to water vaper Mg/m2 hour >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >20

Water repellent Minute <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >30

Lining Cambrelle black Permeability to water vapor Mg/cm2 hour >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

4

Page 5: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

BESTBOOT S3

Product Reference Bestboot ENISO 20345:2011 S3 SRC Sizes 36-47 Weight (s. 41) 760 gr. Model description Leather boot, black, warm lining, antistatic, puncture resistant steel sole, shock proof, antislip, steel toe, S3, PU/PU sole.

Application areas: Construction, Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommed to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description

Measure Unit

Result EN345

required

Complete shoe

Protection of toes: metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal plate resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15,5

18,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >35 >20

Upper Black Leather, water repellent, Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >35 >30

Lining Warm lining Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

5

Page 6: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

MANAGER S3

Product Reference Manager ENISO20345:2011 S3 SRC Sizes 39-46 Weight (s. 41) 540 gr. Model description: Leather shoe, water repellent, black, cambrella lining, antistatic, puncture resistant SJ Flex sole,shock proof, antislip, composite toe cap, S3 PU sole + rubber part.

Application areas: Construction,Manufacturing.

Precaution and maintanance of the shoe: To extend the life of your shoes, we recommed to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description Measure

Unit Result

EN345

required

Complete shoe

Protection of toes: composite tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: SJ Flex resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15

17,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >41 >20

Upper Leather, water repellent, black Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >34,3 >30

Lining Cambrealla black Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exofliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (voumen variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

6

Page 7: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

X1110 S3

Product Reference X1110 ENISO20345:2011 S3 SRC Sizes 38-47 Weight (s. 41) 560 gr. Model description: Leather shoe, water repellent, black, cambrella lining, antistatic, puncture resistant steel sole,shock proof, antislip, steel toe cap, S3 PU/PU sole.

Application areas: Construction,Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description

Measure Unit

Result EN345

required

Complete shoe

Protection of toes: metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15

17,5

>14

14

Anti-shock system: Low-Density polyurethane and profile of the heel

Shock absorption in heel J >41 >20

Upper Leather, water repellent, black Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >34,3 >30

Lining Cambrealla black Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,0mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

7

Page 8: BESTBOY S3All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us. BESTBOY S3 Product Reference Bestboy

PRODUCT SHEET

Our shoes are constantly evolving, the technical data above may change. All product names and brand Safety Jogger, are registered and may not be used or reproduced in any format, without written consent from us.

X1100N S3

Product Reference X1100N ENISO20345:2011 S3 SRC Sizes 38-47 Weight (s. 41) 640 gr. Model description: Leather shoe, water repellent, black, cambrella lining, antistatic, puncture resistant steel sole,shock proof, antislip, steel toe cap, S3 PU/PU sole.

Application areas: Construction,Manufacturing.

Precaution and maintenance of the shoe: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator, nor nearby a heat source.

Description

Measure Unit

Result EN345

required

Complete shoe

Protection of toes: metal tip resistant to: A shock of 200 J Pressure of 1500 kg Sole: Metal resistant to 1100N

Impact resistance (Clearance after shock) Compressive strength (after clearance compression)

Mm Mm

15

17,5

>14

14

Anti-shock system: Low-Density polyurethane And profile of the heel

Shock absorption in heel J >41 >20

Upper Leather, water repellent, black Permeability to water vaper Mg/m2 hour >2,0 >0,8

Thickness 1,6mm Permeability coefficient Mg/cm2 >25,6 >20

Water repellent Minute >90 <60

Front Thickness 1,2mm Permeability coefficient Mg/cm2 >34,3 >30

Lining Cambrella black Permeability to water vapor Mg/cm2 hour >2,1 >2

Back Thickness 1,2mm Permeability coefficient Mg/cm2 >45 >30

Insole Antistatic, absorbent, resistant to abrasion and to exfoliation

Abrasion resistance Cycles >400 >400

Outsole Antistatic double density polyurethane injected directly onto the upper

Abrasion resistance (volume loss) Mm3 110 <150

Shock Absorption, anti-slip, abrasion resistant, mineral oils and weak acids

Oil resistance (volume variation AV) % +1,0 <+12

Coefficient of adhesion of the outsole - 0,18 >0,15

8