bearing inspection report - amazon s3 · 2016-05-10 · bearing inspection report as always, we...
TRANSCRIPT
#4 PM Suction Pick-Up Roll ROLL #3-2703
Bearing Inspection Report
Georgia Pacific
Zachary, LA
Tuesday - May 10, 2016
End User
Georgia Pacific
Contact
Eddie Ryan
Address
1000 West Mount Pleasant Road
City, State, Zip
Zachary, LA, 70791
Phone
(225) 654-1611
SKF TM/ IS
Hilton Wall / Keith Hunt
Equipment
#4 PM
Distributor
Motion Industries
Contact
Brian Pearce
Address
2516 Weller Ave
City, State, Zip
Baton Rouge, LA, 53155
Phone
(225) 356-6131
Application
Suction Pick-Up Roll
Vendor
Valmet
Contact
Billy O'Mary
Address
617 Yorkville Park Square
City, State, Zip
Columbus, MS, 39702
Phone
662-328-3841
Vendor Job #
SO #310903
Serial#
ROLL #3-2703
Inspection Date: 2016-04-28 Travel Time: 8 hours Inspection Time: 1 hours
Keith Hunt - SKF Industry Specialist Pulp &PaperDelhi, LA 71232 /
http://www.SKF.com
Inspected by Bryan Lamb
Bearing Inspection Report
As always, we appreciate the opportunity to be of service. Please contact me if you have any questionsand/or/comments.Kind Regards,
This report is confidential and proprietary to SKF and may not bedisclosed to any third party without the express written consent ofSKF. Use of this report is limited to the sole purpose for which itwas provided.
Outer Ring Outside Diameter (OD)Normal
Outer Ring Raceway (ORR)Normal
Inner Ring Raceway (IRR)
Lubrication: oil
Inner Ring BoreNormal
Rolling ElementsNormal
Cage
Tending Bearing Inspection
Georgia Pacific #4 PM ROLL #3-2703 Suction Pick-Up Roll
Recommendations: Reuse Bearing Remanufacture Bearing Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material,and protected during storage prior to re-installation on journal bearing seat, per SKF.
Bearing Nomenclature: Inner Race Rotation Outer Race Rotation
SKF 239/530 CAK/C08W507 USA, A-4 (2004)
Comments:
Inspection Findings:
Tending Bearing Images
Outer Ring Outside Diameter Photo 1
Normal -
Outer Ring Outside Diameter Photo 2
Normal -
Tending Bearing Images
Outer Ring Raceway Photo 1
Normal -
Outer Ring Raceway Photo 2
Normal -
Tending Bearing Images
Inner Ring Bore Photo 1
Normal -
Tending Bearing Images
Rolling Elements Photo 1
Normal -
Rolling Elements Photo 2
Normal -
Outer Ring Outside Diameter (OD)5.3.3.2 - Fretting corrosion - Minor5.2.2 - Abrasive wear -@ Minor
Outer Ring Raceway (ORR)5.5.3 - Indentation from debris - Minor
Inner Ring Raceway (IRR)
Lubrication: oil
Inner Ring BoreNormal
Rolling Elements5.5.3 - Indentation from debris - Minor
Cage
Drive Bearing Inspection
Georgia Pacific #4 PM ROLL #3-2703 Suction Pick-Up Roll
Recommendations: Reuse Bearing Remanufacture Bearing Replace Bearing
Bearing can be reused and (should/will) be thoroughly cleaned, coated with anti-corrosive material,and protected during storage prior to re-installation on journal bearing seat, per SKF.
Bearing Nomenclature: Inner Race Rotation Outer Race Rotation
FAG 239/530 K.MB.T52BW
Comments:
Inspection Findings:
Drive Bearing Images
Outer Ring Outside Diameter Photo 1
5.3.3.2 - Fretting corrosion - Minor
Outer Ring Outside Diameter Photo 2
5.2.2 - Abrasive wear - Minor
Drive Bearing Images
Outer Ring Raceway Photo 1
5.5.3 - Indentation from debris - Minor
Outer Ring Raceway Photo 2
5.5.3 - Indentation from debris - Minor
Drive Bearing Images
Inner Ring Bore Photo 1
Normal -
Drive Bearing Images
Rolling Elements Photo 1
Rolling Elements Photo 2
5.5.3 - Indentation from debris - Minor
