• FAST AND EASY TO SETUP

• NO SPECIAL LINER REQUIRED; WORKSWITH STANDARD MIL SPEC LINER FURNISHED WITH BLADDERS

• RUGGED CONSTRUCTION – LIGHTWEIGHT WALLS SUPPORT LOADS TO 600 LBS

• LINERS ARE SECURED WITH LARGE LINER LOCKS, NO DAMAGE TO LINER, DESIGNED FOR REPEATED USAGE

• ONCE ASSEMBLED WALLS ARE RESISTANTTO HIGH WIND LOADS, DON’T REQUIRESAND BAGGING

• NO EXCAVATION OR ANCHORING TOSUBSTRATE REQUIRED

• FLEXIBLE USE IN COLD, HOT, OR MOISTENVIRONMENTS

• NO HAND TOOLS OR SPECIAL LIFTINGEQUIPMENT REQUIRED TO ASSEMBLE

• EASY TO OPEN AND CLOSE WALLS FORACCESS

• SHIPS AND STORES IN A DEDICATED SHIPPING CONTAINER

BDS-MPE-20K+ BDS-MPE-50KS U R FA C E M O U N T E D S P I L L C O N TA I N M E N T F O R F U E L B L A D D E R S

Manufactured by PolyStar Inc. – Supplied by Containment Corp – GSA Contract GS-07F-0092TPhone: (800) 235-7421 • Fax: (714) 821-9949 • E-mail: Requests@ContainmentCorp.com

Catastrophic Bladder Failure Test with 50k Bladder

47 lb. walls are easy to handle. Nospecial equipment is necessary forassembly.

Easy to transport. Easy to assemble.Easy to re-pack. Ships in its own dedicated shipping container.

FAST SETUP SURFACE MOUNTED CONFIGURED TO YOUR NEEDS

Now there is a quick, easy to install, containment solution for all your mobile containmentrequirements.

Easier than ever to assemble, stronger wallsegments, an absolute minimum of compo-nents, and no small fasteners to misplace!A simple wall clamp is used to secure theliner to the wall ... no need for sand bags,etc. Best of all, it is available at a price thatworks with your budget!

Surface mounted, all you need is:

1) the MPE wall system which best fitsyour needs,

2) add a liner, for full secondary containment.

System ships and stores in its own dedicatedshipping container. Easy to transport tofield with everything needed to quickly assemble and re-pack when Mission is complete. (20K Container has room tocontain Bladder and Liner. 50K Containeronly accommodates containment system.)

BDS-MPE_3rdParty_Layout 1 4/1/15 10:11 AM Page 1

The 90 degree corner system includes amolded mouse hole for drainage pipesto release rainwater.

Wall segments have been engineeredwith molded structural elements for maximum strength and ease of assembly!Walls slope to inside to throw the wavefrom a catastrophic Bladder failure backon itself!

Wall Segments are designed to nest tightlytogether for shipping & storage.

Rugged fiberglass clamps snap intomolded grooves at top of wall to securethe liner in place. Trim off excess, orleave hanging. No sand bags!

Manufactured by PolyStar Inc. – Supplied by Containment Corp – GSA Contract GS-07F-0092TPhone: (800) 235-7421 • Fax: (714) 821-9949 • E-mail: Requests@ContainmentCorp.com

MPE walls now come in four wallheights … 1-ft, 2-ft, 3-ft, & 4-ft.

MPE 2ft. & 3ft. are popularat oildrilling sites to contain the supportequipment of Frat tanks and pumps.

Create an instant containmentarea for drums, transformers, genera-tors, etc. with the 1ft. MPE walls.

Add the 1ft. MPE Riser to create a4ft. wall for large ponds to200,000g plus.

A large steel rod locks the wall seg-ments together. Slide the rod downto lock walls together. Cables are attached to the base of the wall withthis Locking Rod.

BDS-MPE_3rdParty_Layout 1 4/1/15 10:11 AM Page 2